Search Results

Search found 12826 results on 514 pages for 'third party controls'.

Page 384/514 | < Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >

• Tri-head linux system with Xmonad: is it possible to have HW acceleration

  - by progo

  What means there exists to have three monitors, all controlled by Xmonad and have hardware 3D acceleration as well? I had the pleasure of using three monitors earlier this year, and while Xmonad and Xinerama handle three monitors easily, I had to throw in an extra display driver, and also let go of Nvidia's own TwinView (which is a hack on Xinerama). This left me with no HW acceleration and some flickering as double buffering wouldn't work with certain applications. However, the three monitors handle so beautifully that I had hard time coming back to two. I understand the easiest way to achieve HW-accelerated tri-head combo is to split into two Xorgs. I wouldn't be able to switch windows between the Xorgs, so I'm not really into this solution. What's more, having a cheap and old PCI card along with even slightly better PCIe seemed to slow things down. Even if I occasionally disabled the third monitor from Xorg configure, I couldn't get HW acceleration to work. Only after I physically disconnected the old PCI card, I could get the games back in business. Would a Matrox Dual/Tri-head2go and a powerful Nvidia GPU do the trick? I understand Xmonad can be configured to "believe" that a "single" (as Dualhead2Go will merge) 3360x1050 display is actually two different ones? So that Xmonad's Mod-w and Mod-e would work properly there.

  Read the article

• Using virtualization infrastructure for J2EE application distribution- viable alternative?

  - by Dan

  Our company builds custom J2EE web solutions. At the moment, we use standard J2EE distribution mechanisms (ear/war archives). Application servers are generally administered by our clients' IT departments and since we do not have complete control over the environment, a lot of entropy can be introduced into the solution. For example: latest app. server patch not applied conflicting third party libraries inside the app. server root server runtime and tuning parameters not configured (for example, number of connections in database pool) We are looking into using virtualization infrastructure for J2EE application distribution. Instead of sending the ear/war archive, we’d send image with application server node and our application preinstalled. Some of the benefits are same as using with using virtualization infrastructure in general, namely better use of hardware resources. For us, it reduces the entropy of hosting infrastructure - distributing VM should be less affected by hosting environment. So far, the downside I see can be in application server licenses, here they will have to use dedicated servers for our solution, but this is generally already done that way. Also, there is a complexity with maintaining virtualization infrastructure, but this is often something IT departments have more experience with than with administering and fine-tuning J2EE solutions. Anyone has experience with this model? What are the downsides? Will we not just replace one type of complexity with other?

  Read the article

• Can't connect to Synology DiskStation through HTTPS when using Windows 7 Import

  - by LeonidasFett

  a little background to my problem: I have a Synology DiskStation 213j that I use as a backup/data storage solution. When I'm at work, I would like to push and pull files from my DiskStation but I can't use VPN which is forbidden for outgoing connections. So I wanted to try to use HTTPS so I can at least connect securely to the web interface. I mostly use Chrome which uses the Windows Certificate Store. So I tried importing a self-signed certificate into it, without success. I still get a warning in Chrome telling me the connection is not secure because it can't be verified. When I import the certificate into Firefox though, it works and I can connect through HTTPS. I checked my domain on this site: http://www.sslshopper.com/ssl-checker.html It shows no errors, only a warning that the certificate is self-signed. Which is OK in this case. Any got any idea why importing the certificate into Windows 7 doesn't work? I tried Right-Click domain.mydomain.de.crt File --> Install certificate --> Next --> both options here (in case of "Place certificate in following store:" I selected "Third Party Root Certificate Authorities") to no avail.

  Read the article

• Ubuntu karmic, chroot, Ubuntu server 8.04 LTS and Plesk

  - by morpheous

  I am pretty new to the Linux environment, and although I have been using Ubuntu Karmic desktop for development work, I have always prefered the GUI tools and very rarely use the terminal. I am about to launch a site (a VPS) which will be running Ubuntu server 8.04 LTS and Plesk. I want to install both the server (8.04 LTS) and Plesk in a 'chroot' on my Karmic desktop. I also want to test install some packages I have written for the server, and generally familiarize myself with the environment before I signup to the hosting service. I will be running a streamline server (no GUI), with only the following software: PHP Python mySQL PostgreSQL Apache Plesk Third party packages I developed In terms of mail, I think the hosting provider provides a mail service, so I dont know if I will need to run my own mail server. I will like some advice on the following: How can I install Ubuntu 8.0.4 server LTS in a chroot? How can I install Plesk in Ubuntu 8.0.4 server LTS (from the command line) Can anyone recommend how I back up the remote server when I go live (i.e. what tools to use)?. I will need to back up both databases, as well as some config data and installation packages

  Read the article

• Tracking down source of duplicate email messages in Outlook / Exchange environment

  - by Ken Pespisa

  I have a few users, who are also Blackberry users, that occasionally have duplicate emails generated from their "mailbox". I put mailbox in quotes because I'm not exactly sure where the duplicates are created. One of these users is in non-cached mode, and the other is in cached mode, and both experience the problem. In fact, the non-cached mode user was originally experiencing the problem while in cached mode, and I made the switch a few weeks ago to attempt to solve the problem. Today I discovered the issue still exists. I'm not sure if the fact that they are blackberry users could be causing the problem at all. I don't see how, but felt I should mention it anyway. Does anyone have ideas on how I might begin to troubleshoot this? I can see in the non-cached user's mailbox "Sent Items" that the message was sent only once. I confirmed the message does not state that there was a conflict and in fact that makes sense because they are in non-cached mode. On the server, we have a mail journaling feature turned on for our third-party mail archiving system, and I can see that that system sees two sent messages. And likewise, the recipient does in fact have two messages in their inbox with consecutive message IDs ([email protected]) and ([email protected]). It would seem to me that the duplicates are generated on the client, but is there a way to tell for sure?

  Read the article

• What is the IPv6 equivalent to IPv4 RFC1918 addresses?

  - by Kumba

  Having a hard time wrapping my head around IPv6 here. A lot of the lingo seems targeted at enterprise-level IPv6 deployments, discussing link-local, site-local, global unicast, scopes, etc. Not a lot of solid information on really small networks, like home networks. I want to check my thinking and make sure I am getting the correct translations from IPv4-speak to IPv6-speak. The first question is, what's the equivalent of RFC1918 for IPv6? Initial searches suggested there was no equivalent. Then I stumbled upon Unique Local Addresses (RFC4193), and that states that all ULA's should be assigned the prefix fc00, followed by a 40-bit random number in the routing prefix. This random number is to "prevent collisions when two IPv6 networks are interconnected" -- again, another reference to an enterprise-level function. If I have a small local LAN at home, numbered using 192.168.4.0/24, what's my equivalent in IPv6's ULA scope? Assuming I will never, ever, tie that IPv6 address into the real internet (a router will NAT & firewall it), can I ignore the RFC to an extent and go with fc00::4:0/120? It also seems that any address in fc00::/7 are to be globally routable. Does this mean I'll need extra protections so my router would not automatically start advertising these private IPv6 addresses to the world? Second question, what's this link-local thing? Reading suggests a default-assigned address in the fe80::/10 range that has the last 64bits of the address comprised of the interface's MAC address. Seems to be required, too, but I'm annoyed by the constant discussion of it in relation to enterprise networks. Third question, what is scope id for? Seems to be yet another term tossed around in relation to enterprise networks, especially when interconnecting them, but almost no explanation on the smaller home network level. Can I see a scope ID AND CIDR notation used together? I.e., fc00::4:0/120%6, or are scope IDs only supposed to be applied to a single /128 IPv6 address?

  Read the article

• Linux commands shows different results

  - by ClydeFrog

  I'm really having a hard time to process these results on my Ubuntu server. I have a major problem with my JBoss server where I get FileNotFoundExceptions along with "No space left on device" errors. And I thought "maybe I'm out of disk space", and used df command to figure out how much I have left: root@ubuntu1:/# df -h Filsystem Storlek Anvnt Tillg Anv% Monterat på /dev/mapper/ubuntu1-root 36G 13G 21G 38% / none 2,0G 192K 2,0G 1% /dev none 2,0G 0 2,0G 0% /dev/shm none 2,0G 64K 2,0G 1% /var/run none 2,0G 0 2,0G 0% /var/lock /dev/sda1 228M 23M 193M 11% /boot /dev/mapper/vgdata-lvdata 79G 9,2G 66G 13% /data And as you can see, I have plenty of space left. And I also checked if I'm out of i-nodes: root@ubuntu1:/# df -i Filsystem Inoder IAnv IFria IAnv% Monterat på /dev/mapper/ubuntu1-root 2346512 61992 2284520 3% / none 505380 773 504607 1% /dev none 507383 1 507382 1% /dev/shm none 507383 30 507353 1% /var/run none 507383 2 507381 1% /var/lock /dev/sda1 124496 230 124266 1% /boot /dev/mapper/vgdata-lvdata 10486784 233945 10252839 3% /data But then i used du: root@ubuntu1:/# du -s -h /* 7,5M /bin 23M /boot 19G /data 192K /dev 11G /eniro 5,3M /etc 112K /home 0 /initrd.img 183M /lib 0 /lib64 16K /lost+found 12K /media 4,0K /mnt 4,0K /opt du: kan inte komma åt "/proc/20452/task/20452/fd/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/task/20452/fdinfo/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/fd/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/fdinfo/3": Filen eller katalogen finns inte 0 /proc 18M /root 8,2M /sbin 4,0K /selinux 8,0K /srv 0 /sys 40K /tmp 691M /usr 1,2G /var 0 /vmlinuz Notice that /data and /eniro are 30G combined! How is it possible? Do I have a memory leak somewhere? Or is it something else? ----- EDIT 1 ----- Ok, I figured out that /data has its own mount so it's not possible to combine /data and /eniro because they aren't on the same mount. But how come it says 9,2G on the first command when it says 19G on the third on directory /data?

  Read the article

• Loss of network connectivity when playing video on Optoma HD180 projector

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas?

  Read the article

• OpenSolaris livecd, NForce NIC driver, and NTFS USB mounting. Oh My!

  - by Jake Wharton

  I'm attempting to install OpenSolaris 2009.06 on my server. Before I do I would like to test that everything works and am running in to problems. It has an Abit AN-M2 motherboard with an NForce chipset. The driver config utility says that I need a third-party driver and links me to http://homepage2.nifty.com/mrym3/taiyodo/eng/. Scrolling to the bottom, I have downloaded both tgzs just in case. Now the fun part: The only way to get this on to the computer is via a USB drive since I can't access the network. Also, install CD in the drive otherwise I'd just burn them to DVD. Since my USB key is NTFS formatted I cannot mount it since the install CD seems to be lacking NTFS drivers which require more downloaded packages. What should I do? The server will simply be a dumb NAS and I know that there exists other OpenSolaris-based flavors such as Nexenta but from what I read the stock install is likely the best. If this is not the case and pursuing a different flavor is required or better I will also accept that as an answer (but please don't jump straight to it).

  Read the article

• HUDSON: how to manually encode the LDAP managerPassword?

  - by user64204

  I need to know how to manually encode the LDAP managerPassword which controls the authentication to hudson: <securityRealm class="hudson.security.LDAPSecurityRealm"> <server>ldap.example.org</server> <rootDN>dc=example,dc=org</rootDN> <userSearchBase>ou=People</userSearchBase> <userSearch>uid={0}</userSearch> <groupSearchBase>ou=Groups</groupSearchBase> <managerDN>cn=admin,dc=example,dc=org</managerDN> <managerPassword>{HOW DO I ENCODE THIS?}</managerPassword> </securityRealm> This question has already been raised here: http://jenkins.361315.n4.nabble.com/How-to-encode-the-LDAP-managerPassword-td2295570.html The answer was to configure the managerPassword field via the hudson web interface. The problem we have is that in order to configure LDAP one must be authenticated to hudson, which we cannot do because our LDAP authentication is currently broken (password mismatch between LDAP and the hudson configuration). Can someone explain how to manually encode the LDAP managerPassword? Thanks

  Read the article

• need advice on data center move, communication with both facilities during transition

  - by Brian Roden

  We are beginning the process of moving to a new facility. Office and warehouse operations will both be moving, and we must get shipping operations up and running at the new location while continuing to ship from the old location. Our contract with some third-party warehouse tenants requires two business day turnaround (only weekends and holidays excluded), so we can't have major downtime during the move. We would like to keep our 172.16.60/61.xxx internal address space in use throughout the move. Is it possible to keep using this same internal range, and have our existing WatchGuard Firebox 520 and whatever router we get for the other location (preferably the same model) just treat both locations as one network, leaving our host IPs the same throughout the move? Renumbering the servers when they move isn't a big deal, but our wireless terminals for order picking in the warehouse have fixed IPs (and a fixed IP, non-DNS reference to the host they speak with) and would be a massive undertaking to reconfigure when the servers move (each device would have to be reconfigured at least 2 times -- some when we start using them in the new building and the host is still here, all of them in both locations when the host moves to the new building, and the rest when they finally make the move to the new building). We're trying to avoid that if possible.

  Read the article

• mac gets stuck in a blue screen during boot

  - by user10826

  Hi, a macbook pro 2008 unibody, after restart gets stuck in a blue screen. I used the Leopard disk and I verified and repaired permissions, which seem to be a problem, because the assistant found some wrong files. After restart I got the same problem. After googling I reset PRAM and the other (I do not remember the name now). Same problem. I check that I can boot in safe mode, although it is a lot slower. So before anything I try to make a time machine backup, hoping that I can be done from safe mode. First question: If it works, is it possible to do a clean leopard install (I do not like Snow) and migrate all user accounts from the backup, although it was done in safe mode? Second question: I read about the feature "archive and install" from the leopard disc. Is it reliable? Because I am afraid of losing all data ... Third question: I think this boot stuck has to do with the load of some program or service. It would explain why the computer does boot on safe mode and not in the normal one. I would then like to check what the computer loads during boot, but in more detail that with the information provided from /system preferecens/account/start, because there I removed everything. Where can I find more advanced information? And, if I remove programs from the safe mode, will it be effective druing the normal boot? Thanks

  Read the article

• maximum number of connections Squid

  - by Isaac

  I have a Squid proxy server that controls all internet traffic for my network. I need a way to stop users from downloading big files (say 50MB) in my network. I banned some famous ports (e.g. torrent) but some downloads are possible by HTTP port. Obviously I cannot ban port 80! A simple solution is limiting maxmimum number of the simultaneous connections for each IP (e.g. 3 connections). It's possible in Squid with this config: acl ACCOUNTSDEPT 192.168.5.0/24 acl limitusercon maxconn 3 http_access deny ACCOUNTSDEPT limitusercon But this solution has really bad impact in web browsing, because any smart browser get different parts of a website by several connections simultaneously to speedup web browsing. But if we have a maximum number of connections, the browsers will fail to get some parts and the website will be shown partially and some parts/images/frames will not be shown. So, can we limit maximum number of persist connections? I think this policy will works: Specify Maximum number of connections that is alive for 10 seconds But Number of simultaneous connections for every IP is unlimited But how can we implement this policy when Squid? With which config? UPDATE: artifex and Tom Newton offered using a bandwidth-limiting approach to fight against downloaders. But bandwidth-limiting in Squid has a shortcoming: It's static and cannot dynamically change. So a person has a limited bandwidth not matter how many people are using internet (maybe nobody!) Also, this solution cannot help to stop people from downloading. They still can download but in a lower speed. But if we find a way to terminate persist connections (or any connection that is alive more than a specific time), downloading big files will be almost impossible (always there is some way!)

  Read the article

• winbind failing after a semi-random amount of time

  - by The Digital Ninja

  I have winbind set up to authenticate to our AD for samba shares. This is the third such server, and the only one having any issues. It seems after a random amount of time samba shares will just stop working. Winbind processes seem to be running but restarting them seems to fix the issue for a while. Looking at the logs have been kind of hit an miss and I don't know exactly when it fails. One interesting thing is that it seems to be pulling from another domain controller that it shoudlnt. I censored out the domain name in this example. But isnt there some way to block authentication to a domain? I'm not sure if this is a symptom or a cause of the issue. [2010/10/18 08:02:10, 0] winbindd/winbindd_cache.c:initialize_winbindd_cache(2577) initialize_winbindd_cache: clearing cache and re-creating with version number 1 [2010/10/18 09:15:54, 1] libsmb/clikrb5.c:ads_krb5_mk_req(686) ads_krb5_mk_req: krb5_get_credentials failed for [email protected] (Cannot find KDC for requested realm) [2010/10/18 09:15:54, 1] libsmb/cliconnect.c:cli_session_setup_kerberos(624) cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: Cannot find KDC for requested realm [2010/10/18 09:15:54, 0] lib/util_sock.c:write_data(1139) write_data: write failure. Error = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:write_socket(242) write_socket: Error writing 108 bytes to socket 18: ERRNO = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:cli_send_smb(290) Error writing 108 bytes to client. -1 (Connection reset by peer)

  Read the article

• Excluding files from web logs

  - by Ray

  I originally tried this question on StackOverflow, but it was suggested that serverfault was a better choice. So, here it is... Looking through my web logs, I see a lot of entries that don't interest me. Some of them are commonly used images, css files, and scripts, which I can easily exclude by un-checking the 'log visits' check box in IIS for the folder properties. I would also like to exclude log entries for certain common requests which are not in their own folders. Mostly, 'favicon.ico'. 'scriptresource.axd', and 'webresource.axd'. These (especially scriptresource.axd) make up almost a third of a typical log file on my site. So, the question is, how do I tell IIS not to log these requests? And is there any reason that this is a bad idea? The purpose of doing this is to reduce the log file size and the amount of work the server has to do, to make the log file more manageable when I need to dig in to them for troubleshooting, and for my own curiosity. I realize that log file parsers can skip the junk, but I am interested in reducing the raw files, before parsing.

  Read the article

• What is the best way to connect a 3 switches with a router?

  - by Carlos Morales

  Hello everyone, I'm trying to rebuild the network from my work and I was thinking what is the best way to connect three switches and a router. The router has 4 ports so I thought to connect 2 switches to the router (each switch connected with 2 cables to the router) and then connect the third switch to one of the others with two cables. So is like this, two cables from switch one to the router, two cables from switch two to the router and two cables from switch 3 to switch 1 or 2. So my questions are: Is it better to connect the router to each switch with a cable or the more cables you have the better? If I connect the switch 3 to switch 1 or 2 is it better to connect it with a cable or you get better performance with more cables. If I'm wrong and there is a better or more efficient way to connect them please let me know. The router is a Netgear RP114 (I'll upgrade it to a Sonicwall NSA 240), switch 1 is a Netgear GS748T, switch 2 is a Cisco Catalyst 2924-XL and switch 3 is a D-link DGS-1024D Thank you very much

  Read the article

• No power save on external hard drive - How to implement?

  - by blastawaythewall

  I recently bought a new 3.5" USB external hard drive which I thought had a power save feature on it, but it turns out that it doesn't. So whether it's being used or not, it spins, which wouldn't be a problem if it wasn't so loud and didn't get really really hot. After doing some research, it seems like what controls this is the enclosure of the hard drive and not the drive itself or the OS (although I suspect that's not entirely true). I attempted to use the "hdparm" utility but it couldn't identify my externals. Just to be clear, I'm defining power save as a hard drive spinning down after a certain time period of not being used (read from/written to). Also, I have other externals that do this, so it's not a problem from my computer. Here's my question: Is there a way to implement a power save-like feature on my hard drive through software, OS settings, or anything else? Here's some details: Running: Windows XP Home SP2 HD Model: Cavalry CAUM-B-OTB 2TB (although the website only lists 1TB max) Inside: Hitachi Deskstar 7K2000 (HDS722020ALA330) (I would link, but new users can only post 1) Thanks in advance.

  Read the article

• IIS serving pages extremely slowly

  - by mos

  TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

  Read the article

• What is the best way to create a failover cluster for my IIS website?

  - by ObligatoryMoniker

  Our eCommerce website www.tervis.com currently runs on two servers: SQL server: 2005 x 86 on Windows Server 2003 Standard x86 with a single dual core processor and 4 gb of memeory IIS server: Windows Server 2008 Web edition x64 with dual quad core hyper threaded processors and 32 gb of memory Tervis.com's revenue has steadily grown to the point where we need to have redundant servers deployed with a fail over mechanism so that we do not have any down time. Because the SQL server is so underpowered compared to the web server my thought was to purchase: 2 x SQL Server 2008 R2 web edition x64 single processor license 2 x Windows Server 2008 R2 Web Edition Licenses 1 x New Physical dual quad core 32 GB server 1 x F5 Load Balancer I need the Windows Server 2008 R2 Web Edition licenses so that I can run SQL and IIS on the same box for both of these servers. The thought is to run this as an active/passive fail over cluster that could be upgraded to an active/active cluster if we purchased the additional SQL licensing. The F5 load balancer would serve as the device that monitors the two servers and if the current active one stops responding then fails over to using the other server. To be clear this is not windows clustering but simply using a load balancer to fail over between two computers so that you now have a cluster in the general sense. Is this really the best way to accomplish what I need? Is there some way to leverage the old server 2003 SQL server to function as the devices that funnels http requests to the appropriate active server and then fails over if a problem occurs? Is there any third party clustering software that might help me accomplish this in a simpler fashion?

  Read the article

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Any ideas? Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp2 KB896256 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• Netgear FVS336G: appropriate solution for today's small businesses?

  - by bwerks

  Hey all, I've been looking into a routers to facilitate a vpn solution for a small business. While the Netgear FVS336G looks good on paper, it appears to have some fairly crippling setbacks that drag down what appears to be some great hardware. First off, the unit has been around for a couple years now, perhaps before 64-bit operating systems were as common as they are now, and complaints are everywhere that claim that SSL or IPsec (or both) VPN connections will not work with 64-bit operating systems. However, most of these claims mention only Vista, which makes me think that these problems could have potentially been solved since then. Unfortunately though, Netgear's support forums seem to be incredibly private, and policed by some troll named jmizuguchi who just closes down public posts in order to marshal them into the private ones. Danger, will robinson. Apparently their firmware upgrade process is a nightmare too, but that's beside the point. My question is this: has anyone configured one a Netgear FVS336G to operate in a server 2008 (or R2)/windows 7 64-bit network? If so, is it possible to use the microsoft vpn client or are third party clients still required? If this thing has just failed the test of time, is there a feature-comparable unit that I've missed, at anywhere near the same price range? Thanks!

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• What is the best way to connect 3 switches with a router?

  - by Carlos Morales

  Hello everyone, I'm trying to rebuild the network from my work and I was thinking what is the best way to connect three switches and a router. The router has 4 ports so I thought to connect 2 switches to the router (each switch connected with 2 cables to the router) and then connect the third switch to one of the others with two cables. So is like this, two cables from switch one to the router, two cables from switch two to the router and two cables from switch 3 to switch 1 or 2. So my questions are: Is it better to connect the router to each switch with a cable or the more cables you have the better? If I connect the switch 3 to switch 1 or 2 is it better to connect it with a cable or you get better performance with more cables. If I'm wrong and there is a better or more efficient way to connect them please let me know. The router is a Netgear RP114 (I'll upgrade it to a Sonicwall NSA 240), switch 1 is a Netgear GS748T, switch 2 is a Cisco Catalyst 2924-XL and switch 3 is a D-link DGS-1024D Thank you very much

  Read the article

• Ways of marking a total match

  - by user331898

  I have two columns of matched data. One column contains the ID and the other column contains if there was a match(1) or no match(0) with that ID. There would be times when the all rows with the same ID will have all matched values of 1 and there would times where there were a mix of 0 and 1. I would like a third column to indicate where I have the same ID and all matched values are 1. Sample of what I have below column number and title of column: COLUMN 1: ID COLUMN 2: Match=1,No Match=0 1 1 1 0 2 1 2 1 3 0 3 0 3 1 This is what I would like: COLUMN # & TITLE COLUMN 1:ID COLUMN 2: Match=1, No Match=0 COLUMN 3: All ID Match & Match=1 1 1 N 1 0 N 2 1 Y 2 1 Y 3 0 N 3 0 N 3 1 N Is there a formula or way in excel 2010 that would make this possible? I would still like to keep the rows intact. Appreciate your help. Thank you in advance.

  Read the article

• Website hosting from home - IIS6

  - by Paul

  I'm wanting to host a few websites from home, primarily because I'm using some BETA Microsoft software (.NET 4 and EF) and don't want to install it on my production server which is hosted at eukhost.com. Basically, I'm completely new to this sort of thing. So far, here is what I've done: Registered the domain name at namecheap.com (let's call it mydomain.com) Gone to "Nameserver Registration" in the panel and entered my IP address for the NS1 and NS2 records (let's say the IP is 0.0.0.0). Gone to "Domain Name Server Setup" and entered ns1.mydomain.com & ns2.mydomain.com Forwarded requests from port 80 to my internal IP (let's say 192.168.1.254) Created the website in IIS (I'm just testing with a single website so far, so have not created any host header values) Now, if I type in the IP address (http://0.0.0.0) I get the site as expected. However, if I enter http://www.mydomain.com I get an error saying "DNS Error - Cannot find server". I'm aware that there is a service from DynDNS that will automatically change the IP if I have a dynamic address, however my IP has remained static since I installed the ISP (since October) so I don't need this. Is there any way that I can get the DNS to work just by configuring IIS or something in Windows? I don't really want to have to pay for any 3rd party service. Thanks,

  Read the article

< Previous Page | 380 381 382 383 384 385 386 387 388 389 390 391  | Next Page >