Search Results

Search found 12484 results on 500 pages for 'host'.

Page 385/500 | < Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >

  • ubuntu 9.10 cups server cupsd.conf

    - by aaron
    i have a cups server running on ubuntu 9.10 on my home network. right now i can access it at 192.168.1.101:631, but when i try to access it at myservername.local:631 i get a 400 Bad Request. here's the relevant section from my current cupsd.conf: ServerName 192.168.1.101 # Only listen for connections from the local machine. Listen localhost:631 Listen /var/run/cups/cups.sock # any of the below 'Listen' directives all yield the same result Listen 192.168.1.101:631 #Listen *:631 #Listen myservername.local:631 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd BrowseAddress 192.168.1.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order deny,allow Deny from All Allow from 127.0.0.1 Allow from 192.168.1.* </Location> # Restrict access to the admin pages... <Location /admin> Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> i get the following in /var/log/cups/error_log: E [03/Jan/2010:18:33:41 -0600] Request from "192.168.1.100" using invalid Host: field "myservername.local:631" what do i need to do to be able to access the cups server at both 192.168.1.101:631 and myservername.local:631?

    Read the article

  • Use Windows/Mac MySQL GUI over SSH Tunnel

    - by Marcin
    I am working on a client's website and he has hosting through 1and1. They don't allow connecting directly to their mySQL server from anywhere. I can't for instance load up a mySQL GUI on windows and just connect and work on the databases, it says host not found. His hosting account on the other hand is given access to the mySQL server even though it is in a different location. Let's say these are the servers I'm working with: His main hosting: Address: thehost.com Username: joe His mySQL server: Address: mysqlserver.com Port: 3306 Database: thedata User: dbouser The main hosting account he has comes with SSH. So if I SSH into thehost.com on port 22 and then use the mysql command to connect to mysqlserver.com, it works. I have tried to set up SSH tunneling but the problem is that it's not the mySQL server that has SSH allowed, it's the main hosting. How do I set up SSH Tunneling on both a Mac and a Windows machine so that I can run any GUI I want and I will be able to connect to the mysqlserver.com server. All based on the information above that SSH access is to thehost.com only, and thehost.com itself can connect to mysqlserver.com.

    Read the article

  • lftp cannot connecto to IIS

    - by ruyrocha
    Hello, I can not connect to IIS using lftp as you can see here: <--- 200 Language is now English, UTF-8 encoding. ---> OPTS UTF8 ON <--- 200 OPTS UTF8 command successful - UTF8 encoding now ON. ---> HOST x.x.x.x <--- 504 Server cannot accept argument. ---> USER bla <--- 331 Password required for hgtrf. ---> PASS blabla <--- 230 User logged in. ---> PWD <--- 257 "/" is current directory. ---> PBSZ 0 <--- 200 PBSZ command successful. ---> PROT P <--- 534 Policy denies SSL. ---> PASV <--- 227 Entering Passive Mode (x.x.x.x,194,118). ---- Connecting data socket to (x.x.x.x) port 49782 **** Socket error (Connection refused) - reconnecting ---> LIST ---> ABOR ---- Closing aborted data socket ---- Closing control socket I could connect, list, retrieve and send files using standard ftp command. Do you have any suggestion?

    Read the article

  • Simple P2V help from Linux to Windows

    - by Ke.
    I have two OS's installed on different drives in my PC. One linux (Centos 5.4) and one windows 7. Its getting tiresome to constantly have to stop and restart the PC when I want to use either OS. I would very much like to use Windows 7 as my host OS and access my linux OS from within Windows. However, im having trouble deciphering exactly how to do this (many of the articles seem confusing and a bit overkill) From what i have seen its possible to use VMWare converter to convert the physical linux image to a virtual image so that I can use it in windows. As im having problems understanding how this is done, I would really appreciate a step by step guide (for a newbie), or any simple tutorials that you can point me at. Some questions beforehand: 1) My linux image is around 80gb, do i need to take this into consideration? The linux drive is around 180gb in total. All my other drives are NTFS non writeable in linux (as I use them in windows and ntfs is dodgy in linux), so probably not possible to move the image over to my ntfs drives 2) Can I just zip the linux files up somehow and transfer it to windows to create the p2v? 3) Is it possible to do the P2V conversion while I am logged into windows. I can see the actual linux drive loaded in disk manager, but windows doesnt read linux file systems so im confused as to how to access the linux drive if this is possible. 4) Or will i need to do the whole p2v conversion inside linux? Cheers, any help is much appreciated Ke (a confused p2v newbie)

    Read the article

  • Memcached session manager in Azure: Connection gets forcibly closed

    - by Edgar Pérez
    I am using Memcached Session Manager to handle Tomcat sessions in non-sticky mode. My deployment in Azure consists of a Worker Role with two instances which connect to an Azure VM running my Memcached server. Everything works pretty well, my session is persisted and retrieved by any of the two instances transparently. The problem arises when the session is idle for about 4 minutes; everything points out that the Azure Loadbalancer is closing the spymemcached connection to the VM after some period of inactivity. My MSM configuration is this: <Manager className="de.javakaffee.web.msm.MemcachedBackupSessionManager" memcachedNodes="n1:my-azure-vm.cloudapp.net:11211" sticky="false" sessionBackupAsync="false" sessionBackupTimeout="10000" lockingMode="uriPattern:/path1|/path2" requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js|ttf|eot|svg|woff)$" transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory" customConverter="de.javakaffee.web.msm.serializer.kryo.HibernateCollectionsSerializerFactory"/> The stacktrace printed by the spymemcached client is this: INFO net.spy.memcached.MemcachedConnection: Reconnecting due to exception on {QA sa=/10.194.132.206:13000, #Rops=1, #Wops=0, #iq=0, topRop=net.spy.memcached.protocol.binary.StoreOperationImpl@1d95da8, topWop=null, toWrite=0, interested=1} java.io.IOException: An existing connection was forcibly closed by the remote host at sun.nio.ch.SocketDispatcher.read0(Native Method) at sun.nio.ch.SocketDispatcher.read(Unknown Source) at sun.nio.ch.IOUtil.readIntoNativeBuffer(Unknown Source) at sun.nio.ch.IOUtil.read(Unknown Source) at sun.nio.ch.SocketChannelImpl.read(Unknown Source) at net.spy.memcached.MemcachedConnection.handleReads (MemcachedConnection.java:303) at net.spy.memcached.MemcachedConnection.handleIO (MemcachedConnection.java:264) at net.spy.memcached.MemcachedConnection.handleIO (MemcachedConnection.java:184) at net.spy.memcached.MemcachedClient.run(MemcachedClient.java:1298) Given this idle time limitation in Azure, is there any other way to make MSM work in the azure cloud?

    Read the article

  • Hardware reserved memory issue

    - by Robert Koritnik
    I've seen lots of folks having problem with hardware reserved memory issue in Windows 7/Server 2008 R2. I have it myself but not as huge as others have. Problem description When you install Windows 7 (or its bigger brother Windows Server 2008 R2) your memory may not be fully utilised. If you look at Task Manager > Performance Tab > Resource Monitor > Memory Tab And scroll to the bottom of the list you will see a graphical representation of your memory. Some of it may be hardware reserved. Previous Windows versions didn't have this problem. System was able to utilise all memory available. Question Is there any solution to lower/remove hardware reserved memory? Sidenote I tried installing 32 and 64 bit versions but to no avail. I also tried both Windows: 7 and Server 2008 R2. But always get the same amount reserved by HW. On previous Windows versions I had more memory available because I'm simultaneously running 2 VMs on host (so three machines all together). And my memory peaks much higher now as it did on older versions.

    Read the article

  • How do I make my internal dns forward requests to a given server

    - by ankimal
    We have a DNS server internally that looks up IP addresses for all internal hosts and connects to root dns servers for all other domains (the rest of the internet). Here is my config options { listen-on port 53 { 127.0.0.1;any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query {192.168.1.0/24; 127.0.0.1; }; recursion yes; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view “internal” { // What the home network will see match-clients { 127.0.0.1;any; }; match-destinations { 127.0.0.1;any; }; recursion yes; zone "." IN { type hint; file "named.ca"; }; include "internal_zones.conf"; }; We need to tweak this to go to our ISPs dns, x.y.z.w instead of the root dns servers if the host cannot be resolved internally. Config: Fedora 10/Bind 9.5.2

    Read the article

  • how to enable iis 7 dynamic content compression?

    - by davidcl
    I've turned on dynamic content compression in IIS 7, but Fiddler is showing that my dynamic pages are still being served without content-encoding: gzip. Static content compression is working fine on the same servers. Not sure if it matters but most of the dynamic pages are coldfusion pages and we're also using the IIS URL rewriting module. This is from my applicationhost.config. <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> ... <urlCompression doDynamicCompression="true" /> Here's a sample request: GET / HTTP/1.1 Host: web5.example.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive and response header: HTTP/1.1 200 OK Transfer-Encoding: chunked Content-Type: text/html; charset=UTF-8 Server: Microsoft-IIS/7.0 ... Date: Mon, 22 Feb 2010 20:59:36 GMT

    Read the article

  • SATA drives or chipset throwing DRDY ERR and ICRC ABRT

    - by Matt
    I have an SD-VIA-1A2S PCI card with 2 sata ports (and one ATA-133 that isn't used). Two new Western Digital Caviar Green drives (WD10EARS 1TB) throw repeated errors in kern.log (removed date/time/host info for brevity): [ 7.376475] ata2.00: exception Emask 0x12 SAct 0x0 SErr 0x1000500 action 0x6 [ 7.376480] ata2.00: BMDMA stat 0x5 [ 7.376483] ata2: SError: { UnrecovData Proto TrStaTrns } [ 7.376489] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 7.376490] res 51/84:2f:20:00:00/00:00:00:00:00/e0 Emask 0x12 (ATA bus error) [ 7.376493] ata2.00: status: { DRDY ERR } [ 7.376495] ata2.00: error: { ICRC ABRT } [ 7.376504] ata2: hard resetting link I'm using Ubuntu 9.04 - 2.6.28-18-generic, though I have tried live cds of Ubuntu 9.10, Fedora 12 and OpenSUSE 11.2 - all running various 2.6.31 kernels - and all received the same error. Based on testing these drives and this card in two other machines and combos of connecting the drives directly to the motherboard or the add-in card, I'm relatively convinced that it's the VIA chipset that is the problem. Another computer that also has an onboard VIA SATA chipset (like the add-in card) produces the same errors when the drives are directly on that motherboard. I have been able to verify that the drives are perfectly good, and I tried everything I can think of in terms of swapping cables, psu isn't overloaded, etc. The error happens on boot once or twice, after using fdisk on the drive once or twice, and constantly when attempting to sync a new mdadm raid 1 array created on the two drives. Any thoughts on where to go from here - driver/kernel wise? I'm completely open to buying a new PCI add-in card if someone can recommend one with 2 internal sata ports that works well in Debian/Ubuntu. Thanks!

    Read the article

  • How can we configure the Bitnami Joomla stack to open a socket on startup?

    - by bobo
    I have deployed the Bitnami Ubuntu Joomla! 3.1.5-2 (64-bit) stack on Amazon Cloud: http://bitnami.com/stack/joomla/cloud/amazon By default, the stack is configured to run PHP using PHP-FPM. I have no problem getting the Joomla and phpmyadmin running as virtual hosts on Apache. But now, I would like to add another virtual host. The problem I am having is, I have no idea how to get the system creating a socket on startup in the following folder: bitnami@ip-172-31-15-99:/opt/bitnami/php/var/run$ ls -al total 12 drwxr-xr-x 2 root root 4096 Nov 3 20:43 . drwxr-xr-x 4 root root 4096 Oct 9 15:39 .. srw-rw-rw- 1 root root 0 Nov 3 20:43 joomla.sock -rw-r--r-- 1 root root 4 Nov 3 20:43 php5-fpm.pid srw-rw-rw- 1 root root 0 Nov 3 20:43 phpmyadmin.sock srw-rw-rw- 1 root root 0 Nov 3 20:43 www.sock bitnami@ip-172-31-15-99:/opt/bitnami/php/var/run$ I have the following /opt/bitnami/apps/mywebsite/conf/php-fpm/pool.conf file: [mywebsite] listen=/opt/bitnami/php/var/run/mywebsite.sock include=/opt/bitnami/php/etc/common-dynamic.conf include=/opt/bitnami/apps/mywebsite/conf/php-fpm/php-settings.conf pm=dynamic As it can be seen, listen points to the mywebsite.sock which does not currently exist. I did an experiment, by removing the .sock files in the /opt/bitnami/php/var/run folder and they would come back on reboot. So how can we configure it to open a socket for mywebsite on startup?

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • Bind9 configured to start at boot, has to be started manually

    - by antik
    I've configured bind9 on my system and it works great when it runs. It's currently configured to be run at runlevel 2 by setting: $ sudo update-rc.d bind9 enable 2 This appears to have done its work: $ tree -f /etc/rc?.d | grep -e ".*bind9$" |-- /etc/rc0.d/K85bind9 -> ../init.d/bind9 |-- /etc/rc2.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc3.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc4.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc5.d/S15bind9 -> ../init.d/bind9 |-- /etc/rc6.d/K85bind9 -> ../init.d/bind9 Booting the system, I believe I am at runlevel 2: $ runlevel N 2 Given the above configuration, when the system is rebooted, bind does not come up. Only on occasion, for some reason, can I resolve hostnames immediately after startup. Far more often than not however, I cannot. I can interrogate the service's status: $ sudo /etc/init.d/bind9 status * could not access PID file for bind9 When the service doesn't start, I can start it successfully via a terminal by issuing $ sudo /etc/init.d/bind9 start And it works great from then on. Loopback configuration: $ ifconfig lo lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1872 errors:0 dropped:0 overruns:0 frame:0 TX packets:1872 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:220205 (220.2 KB) TX bytes:220205 (220.2 KB) Do I have my startup misconfigured? (I'm used to Gentoo so Ubuntu's model is still a little new to me) I'm not seeing any log indication of a failed attempt to start at boot in syslog. Is there someplace else I should be looking? What else should I look into to get bind working at startup?

    Read the article

  • Static IP for dynamic IP

    - by scape279
    I have a dynamic IP address. I would like to have a static IP, but Virgin Media don't allow static IPs for residential broadband services, even if you ask them really nicely and offer to pay for it without switching to a business tariff. I am already registered with a dynamic DNS service which is updated by my router eg me.example.com will always resolve to my dynamic IP. This is fine for some circumstances, but not if you can only enter an IP address into configuration files/hardware etc like firewalls, subversion services etc etc. Is there a way I can have a static IP address 'forwarding' to my dynamic IP? Would a possible solution involve tunnelling? Setting up a private proxy? Please note the following: I am able to buy an IP address from my web host. I have access to a webserver and I am able to create custom DNS zones. I'm happy to have a webserver running at home if necessary also. I do not wish to change broadband providers. I have zero control over the services that require the IP address entering so I cannot tackle the problem that way round (services I need to access are at work). PS I've tried googling this issue, but it is very difficult to search for as most results are related to dynamic dns (which I already have set up and isnt quite what I'm after)

    Read the article

  • ssl_error_rx_record_too_long connection error with SSL site in Firefox

    - by Thomas
    I am trying to set up SSL in Apache but when I go to the server in Firefox I get the following error message: An error occurred during a connection to sludge.home. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) My virtual host config file looks like this. <IfDefine SSL> <VirtualHost *:443> ServerName sludge.home SSLEngine on SSLCertificateFile /usr/local/apache/cert/server.crt SSLCertificateKeyFile /usr/local/apache/cert/server.pem SSLProtocol -SSLv2 SSL CipherSuite HIGH:!ADH:!EXP:!MD5:!NULL DocumentRoot "/usr/local/apache/htdocs" ServerAdmin [email protected] <Location /> AuthType Digest AuthName "private area" AuthDigestDomain / AuthDigestProvider file AuthUserFile /usr/local/apache/passwd/digest_pw Require valid-user </Location> <Directory /usr/local/apache/htdocs/bugz> AddHandler cgi-script .cgi Options +Indexes +ExecCGI DirectoryIndex index.cgi AllowOverride Limit FileInfo Indexes </Directory> <Directory /usr/local/apache/htdocs/bugzilla> AddHandler cgi-script .cgi Options +Indexes +ExecCGI DirectoryIndex index.cgi AllowOverride Limit FileInfo Indexes </Directory> <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "/usr/local/apache/htdocs"> Options Indexes FollowSymLinks Allow Override None Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> </VirtualHost> </IfDefine> A telnet to this server reveals that server is sending plain HTML back. Further more it seems as though mod_ssl is not loaded/working even though when I httpd -l it shows up as being statically compiled in. I have exhausted most avenues I can think of.

    Read the article

  • Reverse ssh tunneling with Tomato

    - by Deivuh
    Since my ISP restricts some incoming connections, I can't access remotely to my home pc. What I'm trying to do is make a reverse ssh connection from my home's router with Tomato firmware to the office computer, so I can access remotely from the office with that open connection. What I'm doing is running the following from the router: ssh -R 12345:localhost:22 oUser@office Then I leave run top open to keep the connection alive. And from my office what I do is run the following: ssh hUser@localhost -p 12345 but I get the following message with verbose on: OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [::1] port 19999. debug1: Connection established. debug1: identity file /home/oUser/.ssh/id_rsa type -1 debug1: identity file /home/oUer/.ssh/id_rsa-cert type -1 debug1: identity file /home/oUser/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/oUser/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host I've password remote access enabled in Tomato's configuration, so I should be able to access without having the public key on *authorized_keys*, but I've even tried adding it and still the same. I've done the same with my home's computer, and it does work perfectly, but it doesn't with the router. Am I doing something wrong? Thanks in advance.

    Read the article

  • ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

    - by ewwhite
    I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

    Read the article

  • Modify registry for Internet Connection Sharing?

    - by Tim
    My OS is Windows XP. Quoted from How to Change the IP Range for the Internet Connection Sharing DHCP service Use Registry Editor to modify the data value of the IntranetInfo value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Settings\General The first number listed is the IP address of the internal IP address of the Connection Sharing host. The second number is the subnet IP address separated by a comma. Enter the first IP address of the new range followed by the subnet mask, separated by a comma. (For example, 169.254.0.1,255.255.0.0.). Modify the data value of the Start value in the following registry key: Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing\Addressing\Settings Change the value to the second address of the selected IP range. This address cannot be the same or a lower value than the IP address used for the IntranetInfo key. Modify the data value for the Stop value in the same registry key. Enter the last the IP address of the selected IP range. My registry table does not have Hkey_Local_Machine\System\CurrentControlSet\Services\ICSharing, and I don't know how to do with my registry table following the above three steps. Can someone guide me through it step by step?

    Read the article

  • PXE with WDS & Windows Server 2012 - no filename option in DHCP lease?

    - by user1799
    I'm trying to configure Windows Server 2012 (a virtual box VM) with WDS so I can PXE boot some Windows 7 VMs (also virtual box). All the machines involved are only attached to the "host only network", 192.168.56.0/24. The Server 2012 machine has been setup as an AD DS machine, has DNS installed and working along with DHCP with option 60 - PXEClient - set and WDS is set to not listen on DHCP ports. I've followed http://technet.microsoft.com/en-us/library/jj648426.aspx very closely. I've used the boot.wim and install.wim files from the Win 7 installation DVD and they're configured as 'boot' and 'installation' images respectively. When I boot the target machine, it gets an IP address, but I simply get 'no filename' and the boot won't proceed any further. I've tried setting option 66 to 192.168.56.2 (the WDS server) and option 67 to both Boot\x64\wdsnbp.com and Boot\x64\pxeboot.n12 but all to no avail. I can't seem to see anything in the event log, either. Can anyone out there spot what I'm doing wrong? Or give tips to narrow down a diagnostic?

    Read the article

  • Problems setting up a VPN: can connect but can't ping anyone

    - by Fernando
    This is my first time setting a VPN. Clients can connect but can't ping other machines. This is certainly a route problem but i can't find the right way to configure it. Here is a sample example of the two LANS i want to connect: So, i want machines from 192.168.1.0/24 being able to connect with 192.168.0.0/24 as if they were on the same network. For the VPN network, i would like to use the 10.0.0.0/24 range. Here is my server.conf: proto udp port 1194 dev tun server 10.0.0.0 255.255.255.0 push "route 192.168.0.0 255.255.255.0 192.168.0.1" push "dhcp-option DNS 192.168.0.1" push "dhcp-option WINS 192.168.0.1" comp-lzo keepalive 10 120 float max-clients 10 persist-key persist-tun log-append /var/log/openvpn.log verb 6 tls-server dh /etc/openvpn/keys/dh1024.pem ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/server.crt key /etc/openvpn/keys/server.key tls-auth /etc/openvpn/keys/mykey.key 0 status /var/log/openvpn.stats And one of my clients 192.168.1.2: client dev tap proto udp remote my.no-ip.address 1194 route 192.168.1.0 255.0.0.0 192.168.1.1 3 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\test1.crt" key "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\test1.key" tls-auth "C:\\Program Files\\OpenVPN\\easy-rsa\\keys\\mykey.key" 1 ns-cert-type server cipher BF-CBC comp-lzo verb 1 What exactly i am doing wrong? All machines can connect to openvpn but the ping doesn't work. At the client log i see the following error: Wed Feb 16 09:43:23 2011 OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options Wed Feb 16 09:43:23 2011 OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.1 Thanks!

    Read the article

  • How do I locate the app generating this network traffic?

    - by Christopher Bartels
    I don't know what this process is doing on my computer. I run Windows 7 Professional w/ all its updates running current non-free antivirus. I only see it in Resource Monitor, where you can see the Network Service process connected to bitum.nnov.ru. When my PC's network traffic generating apps are idle, this process is using the most of all the idle processes using the network. Screenshot hosted here: http://sss.proinbox.com/bitum-nnov-ru.jpg Does anyone recognize this? The page source mentions a control port & a stream port: Page Source for http://bitum.nnov.ru : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <title>DVR WebViewer</title> <meta http-equiv="Content-Type" content="text/html; charset=euc-kr"> </head> <body topmargin="0" leftmargin="0"> <OBJECT classid="clsid:EE479A40-C128-40DD-93DA-000556AF9607" codebase="CtrWeb.cab#version=1,0,2,2" width=875 height=585 align=center hspace=0 vspace=0 > <param name="CmdPort" value="5920"> <param name="StreamPort" value="5921"> </body> </html> When I google this page's title, I see a number of other domains that host the same page. Whois: domain: NNOV.RU nserver: ns.kis.ru. nserver: ns.nnov.ru. 78.25.80.210 nserver: ns1.kis.ru. nserver: ns2.kis.ru. state: REGISTERED, DELEGATED, VERIFIED org: "Agentstvo Delovoj Svjazi", Ltd registrar: RU-CENTER-REG-RIPN admin-contact: https://www.nic.ru/whois created: 1996.10.23 paid-till: 2012.11.01 free-date: 2012.12.02 source: TCI Last updated on 2012.06.16 04:20:46 MSK

    Read the article

  • Activation context generation failed for "C:\php\php-cgi.exe". Dependent Assembly

    - by Eyla
    Greeting, I have Windows Server 2008 Server Core. I want to configure this server to host php websites using IIS 7. I installed and configured IIS7 to run php using the steps in this website: http://blogs.msdn.com/b/philpenn/archive/2009/07/19/deploying-iis-7-5-fastcgi-php-on-server-core.aspx Now I’m facing a problem that when I request my php website I would get this error. Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. I check the even log and I found these details too: Activation context generation failed for "C:\php\php-cgi.exe". Dependent Assembly Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.21022.8" could not be found. Please use sxstrace.exe for detailed diagnosis. I search about this error and I found a solution for it but which is to install Microsoft Visual C++ 2008 SP1 Redistributable Package (x86). I installed but still I’m getting same error. Please help me to solve this problem and let me know if you want to know more info about my issue.

    Read the article

  • Recovering a VHD after resizing it using VBoxManage

    - by tjrobinson
    I am using VirtualBox 4.1.18 and had a virtual machine running Windows 8 RC with a single VHD, which was initially sized at 25GB (too small!). After installing the OS and some applications I ran out of disk space so shut down the guest and then used this command to resize the VHD to 80GB: C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe modifyhd "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd" --resize 81920 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe showhdinfo "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd" UUID: 03fb26e7-d8bb-49b5-8cc2-1dc350750e64 Accessible: yes Logical size: 81920 MBytes Current size on disk: 24954 MBytes Type: normal (base) Storage format: VHD Format variant: dynamic default In use by VMs: Windows 8 RC (UUID: a6e6aa57-2d3a-421b-8042-7aae566e3e0b) Location: D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd So far so good. However, when I started the guest up again I got the dreaded: Fatal: No bootable medium found! system halted If I boot into GParted it shows a single 80GB drive as "unallocated". The option to scan for and attempt to repair a filesystem doesn't find anything. I also tried cloning the VHD into a VDI file, just in case that magically fixed it: C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe clonehd "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vhd" "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vdi" --format VDI 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% Clone hard disk created in format 'VDI'. UUID: baf0c2c4-362f-4f6c-846a-37bb1ffc027b C:\Program Files\Oracle\VirtualBox> .\VBoxManage.exe showhdinfo "D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vdi" UUID: baf0c2c4-362f-4f6c-846a-37bb1ffc027b Accessible: yes Logical size: 81920 MBytes Current size on disk: 24798 MBytes Type: normal (base) Storage format: VDI Format variant: dynamic default In use by VMs: Windows 8 RC (UUID: a6e6aa57-2d3a-421b-8042-7aae566e3e0b) Location: D:\VirtualBox VMs\Windows 8 RC\Windows 8 RC.vdi Is there anything else I could try to recover the drive? No, I don't have a backup :( My host OS is Windows 7 64-bit.

    Read the article

  • mercurial hgwebdir error with basicauth in apache2

    - by Dio
    Hello, I'm having kind of a strange error that I'm trying to track down. I was trying to setup mercurial on my home server this weekend. I seem to have it running up to the point where I'm trying to get repositories published correctly. I'm running Ubuntu 10.04 LTS Mercurial Distributed SCM (version 1.4.3) I followed the hgwebdir guide: http://mercurial.selenic.com/wiki/HgWebDirStepByStep and everything seems to work great, I can pull and push my local repositories. Then I tried to add basic auth changing ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None </Directory> to ScriptAliasMatch ^/hg(.*) /var/hg/hgwebdir.cgi$1 <Directory "/var/hg"> Options ExecCGI FollowSymLinks AllowOverride None AuthType Basic AuthName hgwebdir AuthUserFile /usr/local/etc/httpd/users Require valid-user </Directory> This works exactly as I'd expect it to when I navigate to the directory via my web browser, but when I hg push get a long section repeating of File "/usr/lib/python2.6/urllib2.py", line 369, in _call_chain result = func(*args) File "/usr/lib/python2.6/urllib2.py", line 855, in http_error_401 url, req, headers) File "/usr/lib/python2.6/urllib2.py", line 833, in http_error_auth_reqed return self.retry_http_basic_auth(host, req, realm) File "/usr/lib/python2.6/urllib2.py", line 843, in retry_http_basic_auth return self.parent.open(req, timeout=req.timeout) followed by File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 249, in do_open self._start_transaction(h, req) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 419, in _start_transaction return keepalive.HTTPHandler._start_transaction(self, h, req) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 342, in _start_transaction h.endheaders() File "/usr/lib/python2.6/httplib.py", line 904, in endheaders self._send_output() File "/usr/lib/python2.6/httplib.py", line 776, in _send_output self.send(msg) File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 247, in _sendfile connection.send(self, data) File "/usr/lib/pymodules/python2.6/mercurial/keepalive.py", line 519, in safesend self.connect() File "/usr/lib/pymodules/python2.6/mercurial/url.py", line 273, in connect keepalive.HTTPConnection.connect(self) RuntimeError: maximum recursion depth exceeded while calling a Python object I'm a bit at a loss on this one. I'm really not sure why adding the authorization seems to work fine via my web browser but throw these errors from hg. Any help would be greatly appreciated.

    Read the article

  • Need Help Accessing the Vista Wampserver localhost from Virtual PC 2007 running an XP VM.

    - by Reg
    (I had posted this on stack overflow but it was suggested there that I post it here instead). I have a Vista laptop on which I'm running wampserver. I have Virtual PC 2007 setup with Windows XP running on the VM. My goal is to be able to use the XP VM to run IE6 to view the localhost in the Vista wampserver. I'm not interested in having the XP VM have any access to the internet -- only to my Vista wampserver's localhost. The vista wampserver works fine. As suggested on a blog I read, I installed the loopback adapter on Vista and I set the loopback to 192.168.21.1 and I set the xp vm ip to 192.168.21.2. I am able to successfully ping the vista-loopback adapter from the xp vm. I've turned the wampserver to "server online", and I've disabled the firewalls in both the vista host and the xp vm. But for some reason, I still can't seem to get the virtual XP to see the localhost on the vista wampserver. I've tried using the vista //name, and I've tried the ip 192.168.21.1 directly and with the port. For whatever its worth, I'm not able to see anything under the XM VM's network places (though I don't know if I'm supposed to be able to see anything). So at this point I'm stuck and I'm still not sure how to get this XP VM to "talk" to my vista wampserver localhost. Any advice on how to fix this problem is much appreciated. Thanks in advance for your help. -R

    Read the article

  • Citrix Performance monitoring

    - by Dr I
    Hi people, I has a strange thing which appears on my Citrix Farm today. My users are equiped with a Thin client Axel Model 80F, and today, one of them sustained a problem on it. He opened a citrix's Publish Desktop session (Host by a farm of Windows 2003 R2 SP2 Servers), he loaded Lotus Notes and a mail who contained an PDF attached file. Once he has opened his PDF File, his session has freezed. We've just reboot the Thin Client, and log in again on the session (which hasn't been closed during the process). Once we have log in again, we try to read the pdf and once again afer half a page the session freeze again (I can see the mouse moving on the screen but can make anything). Then I close the session, reboot correctly the thin client, and "Tada" with the same manipulationsn averything is correct and we don't facing any freeze. Well Now my question is: Is that bug came from the thin client or the server about you? I've checked on my farm and I don't have any alert from the Citrix's Monitoring console logs. According to me it's due to the Thin Client BUT I ddon't have enought monitoring tools to be sure of that. So do you have some quite godd monitoring tools or method? My config: Windows 2003 R2 SP2 Citrix Xenapp 5.0

    Read the article

< Previous Page | 381 382 383 384 385 386 387 388 389 390 391 392  | Next Page >