Search Results

Search found 24933 results on 998 pages for 'arch linux'.

Page 386/998 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• Wi-Fi Stick with ZD1211 chip refuses to work on Ubuntu >8.10. No clue.

  - by Benjamin Maus

  I have a machine running Ubuntu 9.10 (Karmic *x86_64*). Everything is running smooth so far, except for the Wi-Fi USB Stick. The same device worked perfectly in 8.10. The wireless device is a GW-US54GXS using the Zydas Zd1211 chipset. Dmesg output after plugging in: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' [ 196.304209] zd1211rw 2-1:1.0: phy0 [ 196.304227] usbcore: registered new interface driver zd1211rw [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Syslog output: Nov 5 11:20:24 somesystem kernel: [ 196.303436] phy0: Selected rate control algorithm 'minstrel' Nov 5 11:20:24 kierkegaard NetworkManager: <info> Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/ieee80211/phy0/rfkill0) (driver <unknown>) Nov 5 11:20:24 somesystem kernel: [ 196.304209] zd1211rw 2-1:1.0: phy0 Nov 5 11:20:24 somesystem kernel: [ 196.304227] usbcore: registered new interface driver zd1211rw Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0) Nov 5 11:20:24 somesystem NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/net/wlan0, iface: wlan0): no ifupdown configuration found. Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'zd1211rw') Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2 Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): now managed Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2) Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): bringing up device. Nov 5 11:20:24 somesystem kernel: [ 196.334137] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.357463] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:24 somesystem kernel: [ 196.402643] zd1211rw 2-1:1.0: firmware version 4725 Nov 5 11:20:24 somesystem kernel: [ 196.442611] zd1211rw 2-1:1.0: zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Nov 5 11:20:24 somesystem NetworkManager: <WARN> nm_device_hw_bring_up(): (wlan0): device not up after timeout! Nov 5 11:20:24 somesystem NetworkManager: <info> (wlan0): deactivating device (reason: 2). Nov 5 11:20:24 somesystem kernel: [ 196.463814] usb 2-1: firmware: requesting zd1211/zd1211b_ub Nov 5 11:20:24 somesystem kernel: [ 196.466823] usb 2-1: firmware: requesting zd1211/zd1211b_uphr Nov 5 11:20:29 somesystem wpa_supplicant[978]: Could not set interface 'wlan0' UP Nov 5 11:20:29 somesystem wpa_supplicant[978]: Failed to initialize driver interface Nov 5 11:20:29 somesystem NetworkManager: <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. Gnome tells me in the network menu that the device was "not ready". It appears in iwconfig but not in ifconfig. The same symptoms appear when I boot from the live CD. How can I solve this dilemma?

  Read the article

• What's the purpose of setgid directory?

  - by ???

  I know how setgid works, but I don't know why it is designed, is there any example to illustrate what problems it solves?

  Read the article

• Minimizing windows to tray in xfce

  - by Gryllida

  For XFCE (v. 4.8), I'm searching for possible options to minimize windows to tray (iconify). This means that 1) they're not in the window listing and 2) they're not in the alt+TAB menu and 3) when closed, the window hides (it disappears from window listing but still stays running). "alltray" has some weird GTK-related bug (https://bugs.launchpad.net/alltray/+bug/589831; windows hide but unhiding doesn't do anything; they stay in the tray icon until the user undocks them). "trayer" complains that "another systray is already running" and there's no obvious workaround. This question here is to ask about possible minimalistic (as everything in XFCE is) solutions which don't involve manual compiling, and aren't an overkill like cairo-dock is (a rather bloated gnome-style application which creates a new large 'tray' instead of using the existing one). Thanks!

  Read the article

• iptables and snatting to different networks

  - by codingfreak

  linuxbox (p.q.r.t) | | INTERNAL ------ ABCD ----- INTERNET (p.q.r.s) (m.n.o.k) ABCD has 3 interfaces connected to linuxbox, INTERNAL N/W, INTERNET. Linuxbox has a private address (p.q.r.t). At present I am snatting the packets from linuxbox to INTERNET at ABCD. I have a small doubt regarding the FTP from linuxbox since I have to support ftp from linuxbox to both INTERNAL N/W as well as in INTERNET. How can I right a rule in iptables present in ABCD where it can decide if the destination ip-address of ftp server is within INTERNAL N/W or in INTERNET and do natting accordingly.

  Read the article

• grep changing the delimiter

  - by jhon

  any way we can change the delimiter that uses grep? I think, by default, grep uses '\n' as the delimiter. thanks.

  Read the article

• convert full-disk RAID5 array to partition-based array?

  - by Delan Azabani

  I have a RAID 5 array, md0, with three full-disk (non-partitioned) members, sdb, sdc, and sdd. My computer will hang during the AHCI BIOS if AHCI is enabled instead of IDE, if these drives are plugged in. I believe it may be because I'm using the whole disk, and the AHCI BIOS expects an MBR to be on the drive (I don't know why it would care). Is there a way to convert the array to use members sdb1, sdc1 and sdd1, partitioned MBR with 0xFD RAID partitions?

  Read the article

• I need help installing Autokey in CentOS

  - by Kevin Lee

  PLease teach me how to do it, here's the INSTALL file of the autokey folder: This application requires a full Debian package build - it cannot be installed using only the setup.py script: dpkg-buildpackage -us -uc cd ../ For GNOME: sudo dpkg -i autokey-gtk_.deb autokey-common_.deb For KDE: sudo dpkg -i autokey-qt_.deb autokey-common_.deb I'm using CentOS, I don't have any idea how to install this.. Here's the FAQ page of the Autokey application: http://code.google.com/p/autokey/wiki/FAQ Please help me install this.. Thanks!

  Read the article

• Incorrect durations mp4 file created by ffmpeg (avconv)

  - by Ruslan Sharipov

  Example usage: avconv -i rtmp://maps.lo.ufanet.ru/live/10e227922b473e91f37474fa084107af -vcodec copy -an -sn -map 0 -f segment -segment_format mp4 -segment_time 60 -y %05d.mp4 avconv version 0.8.3-6:0.8.3-1+b1, Copyright (c) 2000-2012 the Libav developers built on Jun 15 2012 13:54:35 with gcc 4.7.0 HandShake: client signature does not match! Metadata: height 480.00 remote_addr: sdp_session {sdp_session,0, {sdp_o,"-","1289703354974145","1289703354974145",inet4, "10.1.12.99"}, "Media Presentation", {inet4,"0.0.0.0"}, {0,0}, [{"control","*"},{"range","npt=0.0 start 30400239.52 timeshift_duration 319250.58 timeshift_size 120000.00 width 640.00 [flv @ 0x1d36a40] Estimating duration from bitrate, this may be inaccurate Input #0, flv, from 'rtmp://maps.lo.ufanet.ru/live/10e227922b473e91f37474fa084107af': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0.0: Video: h264 (Baseline), yuvj420p, 640x480 [PAR 1:1 DAR 4:3], 1k tbr, 1k tbn, 2k tbc Output #0, segment, to '%05d.mp4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuvj420p, 640x480 [PAR 1:1 DAR 4:3], q=2-31, 1k tbn, 1k tbc Stream mapping: Stream #0:0 -> #0:0 (copy) Press ctrl-c to stop encoding ^Cframe= 9566 fps= 36 q=-1.0 Lsize= -0kB time=318.25 bitrate= -0.0kbits/s video:30348kB audio:0kB global headers:0kB muxing overhead -100.000071% Received signal 2: terminating. Result: serafim@yard:~/video2$ ls 00000.mp4 00001.mp4 00002.mp4 00003.mp4 00004.mp4 00005.mp4 Now try to play the files in the player, such as VLC. And that's what we get: the first fragment (00000.mp4) played well, no problems, but the second (00001.mp4 and beyond) starts the bug manifests itself, namely the file 00001.mp4 first 60 seconds black screen, but since 61 seconds starts playing the video. Attachments: https://dl.dropbox.com/u/760901/rtmp_and_mp4.zip How to get rid of the delay with black screen at the beginning of the segments? Maybe ffmpeg to pass parameters, or third-party software is able to correct the obtained segments mp4?

  Read the article

• two samba servers and one ldap backend

  - by user2346281

  I had setup a Samba 3 server as PDC with a passdb LDAP backend. Server SID: S-1-5-21-3270... Domain: A Every user has a SambaSID beginning with this Server SID. But now I try to setup a second server for some shares. This server should use the same LDAP backend because I don't want to have two LDAP backends. Otherwise I have to do modifcations (e.g. add users) twice. Second Server SID: S-1-5-21-3797... Domain: B But now when a user try to mount this new share I see this error in samba log: The primary group domain sid(S-1-5-21-3797....) does not match the domain sid(S-1-5-21-3270...) for xxx(S-1-5-21-3270...). I understand the problem but what can I do to avoid to maintain two LDAP backends? Regards, Simon

  Read the article

• Graphical FTP client for Ubuntu

  - by flybywire

  I want a GUI-ish (and not command-line only) FTP client for Ubuntu. Any good you can recommed?

  Read the article

• SASL - Plaintext password not accepted - Encrypted works

  - by leviathanus

  I have a very strange issue! SASL does not work properly, as it does not accept plain-text passwords (like Outlook sends them) Oct 2 10:35:09 srf cyrus/imap[4119]: accepted connection Oct 2 10:35:09 srf cyrus/imap[4119]: badlogin: [217.XX.XXX.140] plaintext [email protected] SASL(-1): generic failure: checkpass failed Now I switch to "Encrypted password" in Thunderbird. I have the same issue as Outlook above on Thunderbird if I turn on "Plain Password"): Oct 2 10:40:40 srf cyrus/imap[14644]: accepted connection Oct 2 10:40:41 srf cyrus/imap[14622]: login: [217.XX.XXX.140] [email protected] CRAM-MD5 User logged in Same with Postfix: Without Oct 2 10:42:48 srf postfix/smtpd[17980]: connect from unknown[217.XX.XXX.140] Oct 2 10:42:48 srf postfix/smtpd[17980]: warning: SASL authentication failure: cannot connect to saslauthd server: Permission denied Oct 2 10:42:48 srf postfix/smtpd[17980]: warning: SASL authentication failure: Password verification failed Oct 2 10:42:48 srf postfix/smtpd[17980]: warning: unknown[217.XX.XXX.140]: SASL PLAIN authentication failed: generic failure With "Encrypted password": Oct 2 10:45:27 srf postfix/smtpd[21872]: connect from unknown[217.XX.XXX.140] Oct 2 10:45:28 srf postfix/smtpd[21872]: 50B3A332AAB: client=unknown[217.XX.XXX.140], sasl_method=CRAM-MD5, [email protected] Oct 2 10:45:28 srf postfix/cleanup[21899]: 50B3A332AAB: message-id=<[email protected]> Oct 2 10:45:28 srf postfix/qmgr[6181]: 50B3A332AAB: from=<[email protected]>, size=398, nrcpt=1 (queue active) Oct 2 10:45:28 srf postfix/smtpd[21872]: disconnect from unknown[217.XX.XXX.140] Config: /etc/imapd.conf:sasl_mech_list:LOGIN PLAIN CRAM-MD5 and /etc/postfix/sasl/smtpd.conf:mech_list: LOGIN PLAIN CRAM-MD5 I have no idea where to dig. Please advise.

  Read the article

• Killing all processes of current user

  - by Vi

  user@host$ killall -9 -u user Will it definitely kill all processes owned by user (including forkbombs)? No new processes is spawned to user from other users. No user's processes are in D-sleep and unkillable. No processes are trying to detect and ptrace or terminate this started killall. E.g. if killall will finish untampered and successfully is it 100% that no processes are left with this uid?

  Read the article

• Add user in CentOS 5

  - by Ron

  I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

  Read the article

• Nautilus 3.6 est une catastrophe pour le créateur de Linux Mint, qui présente Nemo, le fork du gestionnaire de fichiers

  Nautilus 3.6 est une catastrophe pour le créateur de Linux Mint qui présente Nemo, le fork du gestionnaire de fichiers Le ton est à la provocation dans le monde de l'open source. Après Miguel De Icaza, le créateur de l'environnement de bureau GNOME, qui a déclaré que Linux avait échoué sur le Desktop, s'attirant les foudres de Linus Torvalds, c'est au tour d'un autre acteur de l'open source de faire une déclaration toute aussi controversée. Clement Lefebvre, créateur et responsable du développement de la distribution Linux Mint vient de déclarer dans un billet de blog que Nautilus 3.6 est une catastrophe.

  Read the article

• Raspberry Pi can't see external hard drive

  - by user265818

  My Raspberry Pi (Model B) can't see my external hard drive. It was working before without a problem, until I disconnected and reconnected the drive. It is a self-powered hard drive. When I put another image on a different SD card the Raspberry Pi can see the hard drive no problem, so there is some sort of configuration issue in the current image on the SD card. Any advice will be gratefully received.

  Read the article

• How do I know which /dev/ttyS* is my serial port?

  - by ShaChris23

  I have a laptop which has only one serial port. I went into: /dev directory, and I found: ttyS0 ttyS1 ttyS2 ttyS3 How do I know which of those "ttyS" refers to my serial port?

  Read the article

• Accidentally dd'ed an image to wrong drive / overwrote partition table + NTFS partition start

  - by Kento Locatelli

  I screwed up and set the wrong output for dd when trying to copy a freenas iso, overwriting the wrong external hard drive. Ironically, I was trying to setup a freenas server for data backup... External drive is only used for data storage, system is entirely intact Drive had a single NTFS partition filing the entire device (2TB WD elements) Drive originally had an MBR partition table. Drive now shows as having a GPT, presumably from the freenas image. Drive was mounted at the time, with maybe a couple kB of data written/read after running dd Drive is just a few months old and healthy (regular SMART / fs checks) I have not reboot the OS (crunchbang) /proc/partition still holds the correct information (and has been stored) Have dd's output (records in / out / bytes) testdrive did not find any partitions on quick or deep search running photorec to recover the more important data (a couple recent plaintext files that hadn't been backed up yet). Vast majority of disk content ( 80%) is unnecessary media files. My current plan is to let photorec do it's thing, then recreate the mbr with gparted and use cfdisk to create another NTFS partition using the sector information from /sys/block/.../. Is that a good course of action (that is, a chance of success)? Or anything else I should try first? Possibly relevant information: dd if=FreeNAS-8.0.4-RELEASE-p3-x86.iso of=/dev/sdc: 194568+0 records in 194568+0 records out 99618816 bytes (100 MB) copied grep . /sys/block/sdc/sdc*/{start,size}: /sys/block/sdc/sdc1/start:2048 /sys/block/sdc/sdc1/size:3907022848 cat /proc/partitions: major minor #blocks name ** Snipped ** 8 32 1953512448 sdc 8 33 1953511424 sdc1 current fdisk -l output: WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 2000.4 GB, 2000396746752 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table

  Read the article

• How to place a virtual machine in DMZ?

  - by Giordano

  I have an Ubuntu 12.04 server running few virtual machines with KVM. I would like to expose some of these virtual machines on the internet, to make it possible for customers to test the products we're developing and make available other products for demo purposes. One of the server NICs is configured with a public IP. However before exposing anything on the web I would like to be sure that if one of the virtual machines get compromised, the attacker doesn't reach the rest of the hosts. What I would like to do is to put these virtual machines into a DMZ. These are the steps I'm planning to do: Create a tap interface in the virtualization host (let's say tap1) Create a bridge using tap1 and give it an IP in a subnet separate from the other hosts. Let's say 10.0.0.1 Attach the DMZ virtual machines to the bridge and configure their IP statically (10.0.0.2, 10.0.0.3, etc...) Using UFW, forbid any traffic from 10.0.0.0/24 to any of the internal hosts, allow the traffic from the internal hosts towards 10.0.0.0/24 and expose the virtual machines on the web using port forwarding. Do you think this setup is safe? Can you suggest any improvement or a better/safer approach? Thanks in advance!

  Read the article

• changing user in ubuntu

  - by Rahul Mehta

  Hi , this is my ls -all, the zfapi folder have the root right , how can i change this to www-data. Also Please advise what is the first root and secont root is ? Thanks drwxr-xr-x 4 www-data www-data 4096 2011-01-06 18:21 cdnapi -rw-r--r-- 1 www-data www-data 678 2010-08-30 12:02 config.js drwxr-xr-x 4 www-data www-data 4096 2010-11-23 15:55 css drwxr-xr-x 7 www-data www-data 4096 2010-11-17 13:12 images -rw-r--r-- 1 www-data www-data 25064 2010-12-17 18:26 index.html -rw-r--r-- 1 www-data www-data 19830 2010-12-18 11:24 init.js drwxr-xr-x 2 www-data www-data 4096 2010-12-02 12:34 lib -rw-r--r-- 1 www-data www-data 18758 2010-12-06 18:00 styles.css -rw-r--r-- 1 www-data www-data 1081 2010-10-21 17:56 testbganim.html drwxr-xr-x 2 www-data www-data 4096 2010-12-17 11:15 yapi drwxr-xr-x 7 root root 4096 2011-01-07 18:20 zfapi

  Read the article

• Fast (non-blocking) way to transfer many files to another server

  - by Nyxynyx

  I am currently attempting to transfer over 1 million files from one server to another. Using wget, it seems to be extremely slow, probably because it starts a new transfer after the previous one has been completed. Question: Is there a faster non-blocking (asynchronous) way to do the transfer? I do not have enough space on the first server to compress the files into tar.gz and transferring them over. Thanks!

  Read the article

• How can I setup a group writeable directory?

  - by meder

  $ whoami meder $ cd /var/www $ sudo mkdir html $ sudo groupadd web $ sudo usermod -a -G web meder $ sudo usermod -a -G web medertest $ sudo chown meder:web html $ sudo chmod -R g+rwx html The problem is, anytime I create a new file in /var/www/html even though the group is set to web, it is only writeable by the original user. I was given the advice of setting the umask to be 002 because the default is what causes the problems. But I would have to do this for all users in that group, and as far as I know it would be tedious having all of them modify ~/.bashrc to have umask 002. Even if I can do it myself with a shell command for all of those users, it still seems too tedious. Can anyone offer any advice on having a group writeable directory?

  Read the article

• fstab line for auto mount drive that all users can read/write

  - by evilblender

  I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

  Read the article

• Debian boot disc with a gnu zebra

  - by user30597

  Hello How can i build a debian boot disc with GNU Zebra installed on it? Thanks.

  Read the article

• Debian boot disc with a gnu zebra

  - by user23413

  Hello How can i build a debian boot disc with GNU Zebra installed on it? Thanks.

  Read the article

• Why does running "$ sudo chmod -R 664 . " cause me to get access denied on all affected directories?

  - by Codemonkey

  I have a project folder which has messy permissions on all files. I've had the bad tendency of setting everything to octal permissions 777 because it solved all non security related issues. Then FTP uploads, files created by text editors etc. has their own set of permissions making everything a mess. I've decided to take myself together and start using the permissions the way they were meant to be used. I figured 664 was a good default for all my files and folders, and I'd just remove permissions for others on private files, and add +x for executable files. The second I changed my project folder to 664 however: $ sudo chmod -R 664 . $ ls ls: cannot open directory .: Permission denied Which makes no sense to me. I have read/write permissions, and I'm the owner of the project folder. The leftmost part of ls -l in my project folder looks like this: -rw-rw-r-- 1 codemonkey codemonkey ... drw-rw-r-- 5 codemonkey codemonkey ... -rw-rw-r-- 1 codemonkey codemonkey ... -rw-rw-r-- 1 codemonkey codemonkey ... drw-rw-r-- 3 codemonkey codemonkey ... -rw-rw-r-- 1 codemonkey codemonkey ... -rw-rw-r-- 1 codemonkey codemonkey ... -rw-rw-r-- 1 codemonkey codemonkey ... drw-rw-r-- 4 codemonkey codemonkey ... drw-rw-r-- 5 codemonkey codemonkey ... I assume this has something to do with the permissions on the directories, but what?

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >