Search Results

Search found 13575 results on 543 pages for 'desktop virtualization'.

Page 386/543 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• How can I connect via SSH (Putty) to my VMWare machine (Ubuntu)?

  - by orokusaki

  I'm trying to connect to my VMWare (Workstation 7.1.3) machine (Ubuntu Lucid) via SSH. I've read through some other posts, but I can't figure this out. I ran ifconfig, and got a inet addr: and Bcast and Mask: which appear to be IP addresses. If I try to connect via Putty SSH to any of those addresses, it doesn't work. I also tried connecting to my IP address (from whatismyip.com). Note: This is all taking place on the same desktop computer.

  Read the article

• Get 5.1 surround sound from computer through a VCR config?

  - by Wedding Nails

  I'm posting to see if my idea of this setup is right and can be done. I currently have the following "equipment": a JVC VCR -quite old-, which has built in surround sound (aka it has several speaker outputs, which I believe is 5.1 and are connected to several speakers that are in every corner of the room), a computer with SPDIF optical output and a new flat screen TV (with built in HDMI). I want the computer to take advantage of the VCR's surround system (all the speakers in the room) in order to play mainly music and video always with all the speakers (5.1) and with the maximum sound quality. Currently, the computer plays sound only through the front speaker (I connect one output to the on board pc audio input) and the quality is really bad. As a side note, the computer video runs with S-video (old school), and the picture quality as you would imagine, is really bad with the new big LCD screen. My main goals are: to upgrade the picture with a new video card which would support HDMI (my tv has HDMI). to buy a SPDIF optical cable, connect one end to the VCR SPDIF input and the other end to the PC output This is theoretically what I've researched so far, and I came out with several questions: in this case, with the SPDIF cable connected, and all the configurations done in windows allowing the 5.1, will I get every content I play "converted" or played through all of my speakers? (I read this forum post). I already know that in order for this setup to play from all the speakers, the content/audio source has to be 5.1. but my question is, if there is a way to play from all of the speakers no matter what type of content I'm playing (that's why I said conversion there) I already know that HDMI cables carry digital sound. Is there a way I can only use said HDMI cord to the tv, and get sound through the VCR? (I'm not too sure about this, I would have to disable the TVs speakers and use the VCR surround as default, but I have no clue wether this can be done or not). Update: The ultimate question is, do I really have to rely on "sound virtualization" technology to get sound from all the speakers, no matter what content I play? (do I require a newer sound card, like a creative soundblaster with said technology?) Thanks!

  Read the article

• USB key to pass password in Centos 6

  - by Andrew

  I had a room mate that put a livecd in my desktop and looked around on my machine. I caught him in the act and threw him out. I haven't had a room mate for a while now and so as to avoid the livecd issue again I encrypted the hard drive, the machine is running centos 6.3. Is there anyway that I can avoid typing the password in each time if I have usb key in the machine to feed the password to the system? Additional question. Is there anything you can suggest to solve the problem I have ? Thanks

  Read the article

• Windows XP-Physical memory dumping

  - by Raghav Bali

  I have windows XP professional installed on my desktop. It shows up the following errors - Physical memory dumping blue screen. : This aint a new problem, i have been facing this problem ever since i bought this systme. initially the maintainence guy said it was a faulty hard drive and i have got it replaced 3 times already in the past 1 yr. The system gets utterly slow after a usage of around 2-3 months and then these errors crop up and i have to reinstall my windows to keep away these errors. But this time,its been only a week and the blue screen has come up 3 times. What can be the actual cause of the error?? Mine is an assembled machine, its a core 2duo with gigabyte motherboard and a 1 gb ram, 160 gb seagate hdd. please help me its a seriously annoying problem. Edit : A new error recent popprd up, what should i do now??

  Read the article

• Does static damage computer speakers?

  - by incarna

  I recently got a new pair of Klipsch Promedia 2.1's for my laptop. I unplug my laptop a lot to take it around but today the audio plug touched my plug for my monitor and a bit of static came out of the speakers. I've heard some rumors that static can damage speakers but I've never investigated this problem myself since I previously used a desktop and never unplugged them. The volume was at a normal volume- am I just being paranoid? Or could having the speaker port touching other bits of metal damage my speakers?

  Read the article

• What is the most economic hardware that will run Ubuntu? [closed]

  - by nbolton

  I'm looking to buy the cheapest hardware I can find that will run the latest version of Ubuntu desktop on some sort of usable level (e.g. use of web browser, flash, etc). I guess small form factor would be pretty convenient, so I was looking at Acer Aspire Revo for example, but I'm not sure whether or not it's overpriced. I'd rather pay less for the same thing minus brand name if it's available. Any ideas? On further investigation, it seems I'm looking for a nettop.

  Read the article

• Is there any SMS/MMS server for LAN environment

  - by Chau Chee Yang

  I am looking for a solution to send SMS/MMS message to mobile device from desktop or browser in LAN environment. As such, it is most probably using TCP/IP protocol to transmit request/response. The server may attach to a GSM device with SIM card attached. An server application would then start accept the request from any LAN client and convey the SMS/MMS to one or more recipients. The server may log all requests for further traffic analysis in later stage. Is there any solution that able to perform what I describe here. Please advice.

  Read the article

• How to relink user folders in Windows 7

  - by Jonathan

  The short story: Win7 lost track of my user folders location (desktop, my documents, my pictures etc...). They now reside on a different partition. How can I relink these folders? The long story: The way I partition my drives is: C: - SSD drive for Windows and Program Files D: - A large regular hard drive for all my user data The first thing I do after a fresh Win7 install is move my user folders to D:, by right clicking on these folders under C:\users\username\, choosing the Location tab and clicking on Move. I've just completed encryption of D: using TrueCrypt. It shows a lot of warnings before the encryption process, but (hrrmm...) it does not mention the fact that after encryption the data is located on a new drive letter, say E: This broke Win7's links to my special user folders. How can I relink these folders?

  Read the article

• Mac OSX application running but window is not visible

  - by S White

  greatful for any assistance as this is driving me nuts.. I'm running an application on my macbook pro, and since yesterday I can't see the application's main window. It's icon is showing in the doc and it's options are showing in the top menu bar on the desktop. The program is running normally in all other respects as far as I can tell (its an audio sampler which I am triggering via an external pedal, so I can tell its working). The window did show up once in Expose but now it is not showing up there either (no idea why). I've tried adding the application to every space in 'Spaces' and also removing the preferences file but neither of those helped. I have also reinstalled the application. I really need this back for a music project so any help would be massively appreciated, cheers!

  Read the article

• SCCM 2012 R2 - OSD Task Sequence failure on physical computers

  - by Svanste

  I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

  Read the article

• SCCM 2012 R2 - OSD Task Sequence failure on physical computers

  - by user1422136

  I'm trying to deploy windows 7 with SCCM 2012 R2 to physical desktops and laptops. But the task sequence keeps failing, no matter what I try. When I try it on a VM it works fine. However, when I try it on a physical computer it fails. So I think it has something to do with drivers, but I already tried both the "auto apply drivers" + wmi query for model method, and also the "apply driver package" + wmi query for model method. In the link below I added a zip file, containing two other zip files. One is a captured log from a failed osd on a desktop, the other is the export of my task sequence. Download zip-file with log and TS If anyone could resolve the issue, or share their own task sequence for such a task (pure sccm 2012 (R2), no MDT), that would be great.

  Read the article

• USB microphone very quiet in Windows 7 64bit [migrated]

  - by Brian Harris

  My microphone input is very quiet. I record my voice and the recording comes out very faint. I can barely see the level indicator move when I'm 4 inches away, only when I'm 0.5 inches away does it pick up well enough. Motherboard: P8Z68-V Windows 7 64bit Mic: http://www.amazon.com/Logitech-Desktop-Microphone-Black-Silver/dp/B00009EHJV/ I've been searching the net and lots of people have this problem but I don't see any solutions that work. Maybe this isn't the best forum for a question like this, if not then let me know.

  Read the article

• Accessing guests on virtual network when connected to host via PPTP

  - by Viktor Elofsson

  I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

  Read the article

• Getting back the old alt-tab windows switching behavior in Windows 7?

  - by Carlos A. Ibarra

  When you run more than 6 applications on Windows 7 and you press alt-TAB, icons representing the first 6 applications and the desktop appear on the first row of the grid and you can cycle with alt-TAB-TAB... through the 6 most recently used windows the usual way, but the 7th and other less recently used windows don't follow the same rules. Instead they get grouped together according to their application but disregarding whether they were recently used or not. This new behavior is mentioned here. I am very used to the old way of cycling and the new system is driving me crazy. I tend to have 20 or so windows open at one time and I frequently need to alt-tab to the 7th or 8th window on the stack but it doesn't work the same anymore. Does anyone know how to put back the old behavior, so that alt-tab-tab-tab... goes through the whole list in most-recent to least-recent order?

  Read the article

• Bash Script to Back Up Backs Up Itself

  - by Jay LaCroix

  I have the following bash script that creates a tar.gz of my filesystem on a Kubuntu PC. The problem is, that it also tries to backup the tar.gz backup file, even though I am storing the backup in /tmp and omitting /tmp from the backup. I am wondering why it's backing up the file in /tmp even though I told it not to. #!/bin/bash # init DATE=$(date +20%y%m%d) sudo tar -cvpzf /tmp/`hostname`_$DATE.tar.gz \ --exclude=/proc \ --exclude=/lost+found \ --exclude=/sys \ --exclude=/mnt \ --exclude=/media \ --exclude=/dev \ --exclude=/tmp \ --exclude=/home/jlacroix/Desktop \ --exclude=/home/jlacroix/Documents \ --exclude=/home/jlacroix/Music \ --exclude=/home/jlacroix/Pictures \ --exclude=/home/jlacroix/Projects \ --exclude=/home/jlacroix/Roms \ --exclude=/home/jlacroix/Videos \ --exclude=/home/jlacroix/.VirtualBox\ VMs \ --exclude=/home/jlacroix/.SpiderOak \ / scp /tmp/`hostname`_$DATE.tar.gz jlacroix@Pluto:/share/Recovery/Snapshots sudo rm /tmp/`hostname`_$DATE.tar.gz

  Read the article

• Are there any good apps for managing vCard vcf files?

  - by Lunatik

  I've just got an Android handset and the import of the SIM contacts from my old phone has left them in a mess; lack of capitalisation, funny character substitutions, odd delimiters etc. I have exported the contacts list as a vcf and while I could manually edit this file, I was really after a desktop app that could do formatting, search & replace etc. There are Android apps that do this but, as much as I like the phone's UI, the prospect of sorting hundreds of contacts via it doesn't exactly fill me with joy. A quick Google just threw up lots of questionable download sites, hoping someone can suggest a lightweight alternative

  Read the article

• My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

  - by explorest

  My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

  Read the article

• Problems installing Linux to IDE connected compact flash card

  - by mathematician1975

  I have been trying to install Ubuntu on some hardware (Netcom NC-499 board that contains a Vortex86DX processor). I am trying to install to a compact flash card attached to the board via an IDE adaptor, the aim being that the board will boot up and simply treat the compact flash like a normal hard drive. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it onto the card. I have been trying using a USB CD-ROM drive and the standard .iso image from the ubuntu site (md5 checksum works out fine so no problem there) but I have had no success at all. I have been able to do this with Ubuntu 8.04 but with no other version (9.04 and 10.04 desktop and alternative discs all fail). My question is what other options are available to me to try and install this? I have googled myself apart trying to find out but other than a few sites describing USB based installs using flash memory sticks for very specific hardware, I have found no useful info at all. Any suggestions will be gratefully received.

  Read the article

• what does "Net user administrator /active:yes" do to a computer?

  - by Rees

  i just purchased a new laptop and had some issues with it... I called tech support and they had me run this command in cmd prompt by right clicking the cmd icon and selecting "run as administrator" with root C:\windows\system32: "Net user administrator /active:no" after it was determined that it didn't fix the issue we ran this code "Net user administrator /active:yes" i then rebooted..and was asked for my windows login for my user account "Rees" as usual.. however ALL my settings where gone (including my desktop files) as though it was the first time I booted up. WHAT in the world happened with this command?? I desperately NEED my user accounts and files back to how they were!! (running windows 7) Please help!

  Read the article

• FreeBSD Ports: How can I see all dependencies, and all dependencies for those dependencies, for a port?

  - by Stefan Lasiewski

  I'm trying to build a port which depends on apache-ant. I thought I could run make build-depends-list to see all dependencies required by this port: # make build-depends-list /usr/ports/devel/apache-ant /usr/ports/java/jdk16 /usr/ports/math/gmp But after installing everything, the port had a dependency list which was a mile long: apache-ant-1.8.1 desktop-file-utils-0.15_2 gamin-0.1.10_4 gettext-0.18.1.1 gio-fam-backend-2.26.1 glib-2.26.1_1 gmp-5.0.1 inputproto-2.0 javavmwrapper-2.3.5 kbproto-1.0.4 libX11-1.3.3_1,1 libXau-1.0.5 libXdmcp-1.0.3 libXext-1.1.1,1 libXi-1.3,1 libXtst-1.1.0 libiconv-1.13.1_1 libpthread-stubs-0.3_3 libxcb-1.7 pcre-8.12 perl-5.10.1_3 pkg-config-0.25_1 python26-2.6.6 recordproto-1.14 unzip-6.0 xextproto-7.1.1 xproto How can I see all dependencies, and all subdependencies for a port?

  Read the article

• Is it possible to shutdown a remote computer running Windows 7 via Telnet?

  - by Ryan Shripat

  I've successfully connected to my Windows 7 desktop over wifi via Telnet from an XP Home netbook. To login, I use the following command: telnet -l "win7desktop\win7user" win7desktop win7user in this case is an Administrator on win7desktop and is also a member of the Telnet Clients Group. The problem I have is that when I attempt to shut down win7desktop by issuing the following command: shutdown /s ...at the Telnet prompt, I get an Access Denied error: Access is denied.(5) Is it possible to shutdown a remote computer running Windows 7 via Telnet? If so, what do I need to do to get around the Access is denied error?

  Read the article

• Windows 7 stuck on welcome screen after installing VMware Workstation 7 ?

  - by Mohammad

  I have Win 7 x64 and I have one account on it. I've just installed VMware Workstation 7.0.1 Build 2276000, after that Win 7 stuck on welcome screen and I have to click on the user image to continue. Before that because I have just one account Win7 just showed welcome screen for a minute and then it went to Win7 desktop automatically, but now I have to click on my account image to continue. Something that I've done : Start Run Msconfig Services Tab Checked Hide all Microsoft Services Disabled all services except Eset Services (Anti Virus) Unfortunately the problem haven't solved yet :( How should I fix it?

  Read the article

• Big mail issue two ip address

  - by Luka

  I have two ip addresses on my server, First IP is assigned to my clients, second is assigned to me. Issue started today. My clients can not send mail via php from their ip address (shared ip address which are all of them using). Server is refusing it with error ERROR: Password not accepted from server: 535 Incorrect authentication data But via their desktop mail clients it can send mail, when they use my ip address for hostname (second ip of server assigned to me) they can send mail. help.

  Read the article

• Running complete Native Linux on phones that are bootloader-unlocked [on hold]

  - by james

  Since there are many phones (HTC, Samsung, LG, Nexus) today that have bootloader unlocked, I want to ask what's preventing them from running a complete native GNU/Linux. GNU/Linux has ARM port and we can run a command line GNU/Linux on top of Android by the method of chroot. So, what's preventing for existing bootloader unlocked Android phones from running a complete GNU/Linux natively? The device should get a long shelf life if it has one such port. My few thoughts.. Proprietary drivers for hardware that cannot be made to work when using a different OS. And the binary provider will never support any OS other than what the phone is shipped with. Application Interface. The interface for desktop apps doesn't fit to the mobile display with different PPI. Kernel. Since android devices use Linux kernel whose sources should be available, could the device kernel be modified to work with GNU/Linux. And any other reasons?

  Read the article

• Vista: "connect to a network" does not load (can't set up VPN)

  - by Arkaaito

  I'm trying to connect to my office VPN from home. One small problem: my home desktop uses Vista (64-bit, Ultimate edition). On Vista, you're supposed to set up a VPN like so: Open the control panel Click on Network Click on "Connect to a Network" Configure a new connection of type "Office" The problem is, when I click on the link for "Connect to a Network", nothing happens. Can anyone suggest how I should go about troubleshooting this? (Or am I better off just upgrading to Windows 7?)

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >