Search Results

Search found 14816 results on 593 pages for 'logical model'.

Page 386/593 | < Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >

• Dry length of buoy in OrcaFlex

  - by KAE

  I use a software package called OrcaFlex to model the behavior of a buoy in ocean waves. I would like to share OrcaFlex questions in this forum - hope some users are out there! Here is a starter question: For a 6D buoy, I extracted the 'Dry Length' after the simulation completed. The value of the Dry Length sometimes slightly exceeds the actual height of the buoy, even though this would not seem to be possible given the formula from the manual, Dry Length = (cylinder length) × (cylinder volume above surface) / (cylinder total volume). Any insights?

  Read the article

• Lynksys WRT120N wireless router not connecting to ADSL

  - by pradeetp

  I have a lynksys WRT120N wireless router that was connected to Sterlite ADSL modem. The internet connection was working fine through wireless access. I changed the ADSL router because it developed some power issues and got it replaced with the same model/brand from the service provider. However I am not able to access internet now. Here is the current setting Sterlite SAM300 XA IP Address: 192.168.2.1 (I changed it to this IP because the IP address of my ADSL router was same) Lynksys WRT120N wireless router IP Address: 192.168.1.1 If I connect my laptop to ADSL router directly, the internet works fine. It is only that that if I access it wirelessley through wireless router that I am not able to connect to internet. The IP address setting has been configured to obtain IP address automatically. I have windows 7 OS home edition. Could someone please help me to fix this issue.

  Read the article

• In-house Trusted Certificate

  - by MrEdmundo

  Hi there I'm a developer looking at introducing ClickOnce deployment for an internal .NET Winforms application that will be distributed via the corporate network. Now I would like to deploy this application under the full trust model however in order for that to happen I need to sign the software with a certificate. I can do that with a "test" certificate that has no information of the publisher etc, however that means an extra step will occur on the users workstation where they will have to confirm that the software is OK. So what I want to know is. is there a way I can get my IT Infrastructure guys to create me a an "internal" certificate from the domains Certificate Authority, or do I have to go and pay for a certificate from somebody like VeriSign? Thanks

  Read the article

• SATA Devices not showing up when in UEFI mode

  - by Dan Barzilay

  I'm trying to install Windows and the bios should be set to UEFI mode. The problem is that all SATA devices aren't showing up (shows as if there aren't any) so I can't boot from the installation CD (it's just not there). The weird thing is that when set to LEGACY mode they all show up.. SATA mode is set to AHCI and I'm on Lenovo Y510P. I have a Linux OS installed that is accessible only when BIOS is in LEGACY mode (otherwise the hard drive it's on is not available) I also tried reseting the BIOS settings which didn't help.. Comment please if more details needed Extra details: Computer model: Lenovo IdeaPad Y510P (not overcloacked) Installed Linux OS version: Linux 3.7-trunk-amd64 x86_64 Trying to install Windows: Windows 7 Ultimate 64bit BIOS Information: Vendor: LENOVO Version: 74CN26WW(V1.07) Update: Using user1608638 answer and suggestion of using the USB flash drive as the boot device instead of the CD/DVD method I succeeded in installing Windows 7! (Thanks alot user1608638)

  Read the article

• Hard Disk recovery

  - by Shaihi

  I have 3 disks of the same type model and year of production. All the disks were used part of a generic solution of an IBM server solution. My problem is that all 3 disks suffered the same malfunction at the same exact time and are now dis-functional. I went to two different expert's laboratories and got the same answer: To recover the data they need another identical disk from which they can take spare parts. Can my case really be that clinical? Anyway, I am not sure if this question belongs to this forum, but I am looking to buy the following disk: IIBM ESERVER XSERIES IBM P/N 24P3707 IBM FRU 24P3708 146.8GB USCSI 10K RPM PART NOMBER 9V2005-027 I already bought a disk with the same part number, but the labs said that apparently I need a disk that was manufactured in the same factory. That means that all the numbers have to be exactly the same. If anybody know where I can purchase such a disk (the information on the lost disks is really important to me), please tell me the place.

  Read the article

• UPS compatible with Linux box?

  - by Somebody still uses you MS-DOS

  I'm buying this unit from deal extreme: it's a bitorrent downloader, with NAS capability. I'm interested in sharing an external HD in it, with media and backup purposes. I'm afraid of energy problems (don't know if this is the correct term), corrupting my mounted drives (like after a storm), so I thought about buying an UPS that sends a "signal" to my Linux box, and a script in my Linux box would unmout everything to avoid problems. Do this "UPS signal" feature exists? Do you have model suggestions? Thanks!

  Read the article

• Windows 7 slowing down during hard drive activity

  - by Iniquities of evil men

  Sometimes when normally using my PC, it will (seemingly) randomly slow down, and maybe sometimes even freeze for several seconds. During this slow down period, it looks like a (I don't know which drive it is) hard drive is constantly being written to. During the last slow down, I started Windows's Ressource Monitor and found out that the System process was writing up to 10MB/s to a drive (I suspect it's the system drive, C:\, but I don't know for sure). I'm not doing anything unusual (at least, I don't think I am), and most of the time, it will work normally, but, as I said, it just randomly slows down for some times. Any ideas on what might be causing this and how I can prevent this from happening again? (I have a triple-core processor and 4GB of RAM. My system drive is a WD Caviar Black 500GB, my secondary, 'data' drive is a Samsung drive, which I don't know the model number of, but I can look it up. I can also post my full PC specs if needed.)

  Read the article

• solve dell xps delay on touchpad and keyboard

  - by iim.hlk

  I finally found the complete solution for a frustrating/weird problem i was facing. Problem A ) there is a touchpad delay when typing and try to use the touchpad? problem B ) there is a 1 second delay when press any key and try to use left click button through touchpad? pd: i make this because i searched a lot to get this solved and i want to share the solution, dont want any rep... my pc is a dell xps l521x, but im pretty sure it will apply for any xps model.

  Read the article

• IIS7.5 Domain Account Application Pool Identity for SQL Server Authentication

  - by user38652

  In Windows Server 2003/IIS6 land we typically create an app pool that runs as the identity of an AD account created with minimal privileges simply for that purpose. This same domain user would also be granted access to SQL Server so that any ASP.NET application in that app pool would be able to connect to SQL Server with Integrated Security=SSPI. We are making a brave move to the world of Windows Server 2008 R2/IIS7.5 and are looking to replicate this model, but I am struggling with how to make the application pool in IIS7.5 run as the identity of an AD account? I know this sounds simple and hopefully it is, but my attempts so far have been fruitless. Should the application pool identity be a 'Custom account' for a domain account? Does the domain account need to be added to any groups?

  Read the article

• Can I use VT-D with a windows host for a VM?

  - by Journeyman Geek

  I've got a fairly beefy gaming system that I also run occational virtual machines on. It runs windows 8 and the built in hyper V virtual machine software at the moment and has a core i7 3770 (which unlike the unlocked model, should support VT-D), an Asus P8Z77V and a gforce 660 video card(also asus). I figure that if I could use VT-D I could add a cheap dedicated 3d card for a VM, in case I wanted somewhat more than the 'basics'. I know KVM and Xen support this to some level on linux, but can I do so on windows? I'm open to switching VM software if need be.

  Read the article

• Learn as much as possible about the setup behind a website.

  - by carrier

  Let's say I'm in the process of planning the setup of a website. I study similar sites that offer similar services or might receive similar traffic model. Is there a way to determine a bit the kind of setup, software and/or hardware. Some things are obvious. If I see .php or .jsp then I already know a bit. But any ideas on how to decipher more? Maybe where the site is hosted, hardware, platforms...

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• When should I use SATA 6gb/s?

  - by Gili

  I purchased a Baraccuda hard-drive (model ST3000DM001) that supports a maximum read transfer rate of 210 MB/s and SATA 1.5/3/6 Gb/s. My motherboard has a limited number of 6 Gb/s ports so I'd like to reserve them for when it's really necessary. When does a hard-drive benefit from a SATA 6 Gb/s port? Doesn't it require a transfer speed of at least 375 MB/s to surpass the limit of SATA 3 Gb/s? Are there any other benefits of SATA 6 Gb/s vs 3 Gb/s ports?

  Read the article

• Bootcamp: setup of Windows 7 (64 bit) hanging at "disk.sys"

  - by Skade

  I am having trouble getting Windows 7 Professional (64bit) to install on a Macbook Pro (late 2010 model). The installer hangs when loading the setup from disk. When restarting, I get an option to boot Windows from disk. The installer then starts loading files from disk and suddenly hangs. Using "Safe Mode" (from the advanced menu), it tells me that the installer hangs when loading "disk.sys". The installation is made on a fresh Bootcamp partition, the disk uses GPT. Has anyone seen this before and maybe found a solution?

  Read the article

• Good TN3270 for MacOS? (Mac OS X Snow Leopard)

  - by Bbrado

  I need a good TN3270 emulator for the Mac that supports file transfers to TSO/ISPF (IND$FILE) and 132 char wide screens. Min 132x27 (3278-model-5), better even user defined size like 132x43. So far I've tried TN3270 (no file transfer) and X3270. Besides being an X11 app, unfortunately x3270 does not handle oversize screens correctly and Mocha only has a TN5250. So, what's the TN3270 of choice on the Mac (or how at least do I get x3270 to handle 132xSomething in ISPF correctly, e.g. SDSF Job-Class list)?

  Read the article

• Why does my HDD produce a high-pitched noise when the CPU is in use?

  - by CyberOptic

  I know this is strange. Some time ago, I bought a new 7200rpm HDD for my desktop system (I'll look for the model later). Every time the CPU is used, a high frequency cheep comes from the HDD. I'm sure it's the HDD because the problem does not occur if the HDD is not attached or is in energy-saving mode (I cross-checked by booting from a live CD). What could be the reason for the cheep sounds? Could it be the power supply?

  Read the article

• Isn't ethernet used for LAN?

  - by Alraxite

  I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

  Read the article

• Mouse will not click and drag

  - by C. Ross

  My mouse is currently having trouble with Click and Drag. It moves well, it clicks well (including double click); but it will not click and drag correctly. When dragging it just drops the highlighted area almost immediately after starting it. The operating system is Windows 7 x6, and the mouse is a Microsoft 5 Button laser wired model that's approximately 3 years old. The problem is relatively new, but has been happening consistently for several weeks through several reboots. Is there anything to try besides buying a new mouse?

  Read the article

• Does Windows 8 Need New, Specialized Drivers?

  - by Synetech

  It seems like an obvious question, but I’m having a difficult time finding out if Windows 8, with all its changes, will require new, specialized drivers. I see that a lot of manufacturers have started releasing Windows 8-specific drivers for their hardware, but what about those that are not, will Windows XP or 7 drivers work or have they changed the driver/system/security architecture again, thus requiring new drivers? The closest thing I could find to an answer was a thread in which it was mentioned that the display driver model was again updated, thus requiring new display drivers, but not much else (e.g., audio cards, printers, chipsets, etc.)

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• Spacebar on Samsung Series 7 Chronos Not Working

  - by Samg

  The spacebar on my Series 7 Chronos does not register half the time. I'll be typing along and my words end up lookinglikethis. After further investigation, I noticed the spacebar does not response when pressed at the edges. Basically, the areas under the "C" key and the "M" key do not respond to a press It's weird, the bar physically "clicks" down (like it should), but does not register. No matter how hard I press, It won't register in that area. I noticed some complaints online about a 'sticky' or 'loose' spacebar, but they didn't mention it not registering. We took it back to the store we bought it at and they noticed the same problem on the floor model. Does anyone know how to fix this?

  Read the article

• Hibernate doesn't work in Windows 7 64bit

  - by hey

  Hibernate doesn't work in Windows 7 64bit. When I try to hibernate, it just turns off computer and when I turn on it, it doesn't resume and it just starts as 'fresh' again. I updated my drivers. What is the problem? Can you give me a hand? Thank you. Come on, please help me, I really need hibernate working, 100 of my reputation will go to you. Thanks. Edit, by the way, my model is: Inspiron N5010. After I hibernate and turn on my computer, it just show Shut down didn't shut down correctly.

  Read the article

• Network configuration with limited hardware

  - by Pavel

  I have cable internet and I have two PC. One of them has wireless and ethernet, the other pc has ethernet only. Also, I have a dsl modem that has wireless builtin (some common speedstream model). My goal is to connect all of them so that both have internet access. As I understand, I have two options: connect speedstream to the cable and then connect other PC's to speedstream; OR, connect pc with wireless to the cable and then connect the other pc that has ethernet only using ethernet+wireless through speestream. First one seems to be easy, but it doesn't seem to work. What about the other choice? Is it possible to do it?

  Read the article

• Asus ux31e zenbook SSD non-standard / cant upgrade hdd?

  - by FstaRocka

  I bought a ux31e asus zenbook, and the drive crashed last week. I just cancelled an mSata ssd order because I fear asus has used a non standard ssd!!! what a bunch of crooks, ive lost all my respect for this company! Can anyone confirm what and why? My SSD model is xm11 128gb - it looks like a ram chip and only has two tongues with 12 and 6 pins respectively. The drive I was about to order mSata had 8 where mine had 6 - i never bothered counting the rest. This article seems to confirm! UX31 UX21 Zenbook Article "It looks like SSD uses a non-standard format"

  Read the article

• How to add network printer remotely without knowing the IP?

  - by Steve

  Assume your friend from over 100km away asked you to add a network printer to his computer since you're so tech savvy. How would you add network printer remotely in this case? You would need: 0. Remote connection to your friend's computer 1. Printer IP and brand/model names 2. Respective drivers downloaded either from manufacturer's website or Windows Update driver Question is, how would you find out the IP address of the printer without bothering your friend too much with technical steps? Since your friend isn't as tech savvy as you - they wouldn't know which buttons to press to get IP address.

  Read the article

< Previous Page | 382 383 384 385 386 387 388 389 390 391 392 393  | Next Page >