Search Results

Search found 11427 results on 458 pages for 'live cd'.

Page 387/458 | < Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >

  • What is the best time to set the IP address for a server headed to a server colocation facility?

    - by jim_m_somewhere
    What is the best time to set the IP address for a server? I have a server that I am going to install the OS on and then I am going to send it to a server colocation facility. The server is going to have Internet facing services (www, email, etc.) I can set up a "fake" IP address during install (by fake I mean private as in RFC 1918) and change the "fake" IPs to the real IPs once I set up the colocation service. The other option is to set up the colocation service...wait for them to give me the "real" IPs and use them during the OS install. The ramification are that...if I use "fake" IPs during install...I will have to wait before I set up things like SSL certs. If I wait for IPs from the colocation provider...then I can set up SSL certs that use the "correct" (as in "real") IP addresses...no changes to the certs until they expire. Do the "gotchas" of changing an IP address on a server outweigh the benefits of a quick install? The other danger with using "fake" IPs is that I could make a mistake when I go through the various files to change the IP address to the "live" IP address. Server OS: CentOS 6.2 or CentOS 6.3, 64 bit. Apps: Apache 2.4.X httpd, MySQL 5.X (will eventually use replication)

    Read the article

  • Gitosis problems

    - by user49884
    I've spent the last 14 days on git and gitosis problems. I did always find a way around my problems but now I'm stuck. To briefly summarize the situation: I have setup gitosis, created a project and I can check in and out of it. Then I added another uses, giving him access to the project by adding him to gitosis.conf, but he can not even clone project. Then I added yet another user for the same project (following same procedure), he has access to everything (clone, pull and push). Finally, I added one more user who can not do anything either. I could live with all of this, because I have access to work on the project. Now I have added a new project, or have I? To my best believe, I have done everything the exact same way as with the first project. I do not get a repository in the repository folder on my server (when doing "git remote add..." and push). I have tried following ALL the guides google gave me on "how to create a new repository gitosis" (is up to page 7 before not ALL hits are marked as visited). I have also tried to follow a different path, starting with "git init --bare" on the server, and then try to clone it. Didn't work either. I get the following error no matter what I try: ERROR: gitosis.serve.main: Repository read access denied fatal: The remote than hung up unexpectedly (But it works fine for accessing gitosis-admin and my first project) Then I read about debugging of gitosis. I have tried with -v, --verbose and adding LogLevel = DEBUG in gitosis.conf, none of these give me extra information. Project setup gitosis.conf: [group project] writable = project members = me LogLevel = DEBUG To my best believe, everything is done the exact same way, as I did when setting up my first project. I'm really stuck, how do I proceed now?

    Read the article

  • Show (copy) data at "X" time and stop update

    - by Anka
    I have two sheets. In the first sheet, cell F4, I have 00:00:00 (countdown). G9, G10 and G11 are cells that receive live data (decimal numbers). In the second sheet, I have three cells linked from sheet1, G9 ='Sheet1'!G9, G10 ='Sheet1'!G10, G11 ='Sheet1'!G11 (which update themselves when data is modified in the first sheet). Now I want to set in sheet 2, (assume) cells B9, B10 and B11 to show me (copy) the values from G9, G10 and G11 from sheet 1 when the countdown was 00:00:05 (5 seconds before Start) and not update again if the data changes in the cell it pulled the data from. Like G9 ='Sheet1'!G9 at 00:00:05 and stop here, do not update anything. OK? I can do a part, but the real problem is: I can not make it stop cells to update. Stand frozen, freeze, not move, calm .. however. I do not want to seem pretentious (but my knowledge in excel is limited), the most appropriate would be a formula, not macro or VBA, if possible. I want to post a picture but I can not because of my restrictions. Well, if this is not possible with a formula is just fine with (not really) VBA.

    Read the article

  • How do I use a list of filenames to find a folder on my hard drive, that contains most matches of these filenames?

    - by Web Master
    I need a program that will use a list of file names to find a folder on my hard drive that contains the most of these filenames. Long story short I made a giant map. This map was live and got ruined. New map data files have been generated, and previous map data files have been altered. What does this mean? This means file sizes have been changed, and there will be new files that have never been in the backup folder. Some files map files could also have been generated in other projects. So there could be filenames on my computer not associated with this due to the way the files are named when created. So If I take an indidual file for example "r.-1.-1.mca" This file could show up on my hard drive 10 times. Anyway, the goal is to take 100 map files, turn them into a list, and then search the hard drive and find the folder that has the highest count of matching map file names. Can anyone figure out a way to do this? I am thinking about manually searching for every single file.

    Read the article

  • Is there any any merit to routinely restore a linux system, even if unnecessary?

    - by field_guy
    I do fieldwork with a number of computers running ubuntu performing critical tasks doing fieldwork. The computers are similarly configured with slight variations. Since we've had some configuration issues in the past, my boss is pressing for us to take an image of the installation on each computer, and restore each computer to that image before they are to go into the field. My preferred solution would be to write a common script that checks to ensure that the configuration of the system is correct and that the system is operational. If the computer has been verified, isn't restoring it to that configuration redundant? And are there any inherent problems with doing so? My reluctance stems from the fact that our software and configuration is subject to change in the field, but these changes must be made across all the computers. That means that when a change is made, all the restoration images have to be updated as well. The differences in the configuration of each of the computers live in /etc. In the event that restoration is required, I would prefer to keep a single image containing everything that is common to all machines, and have a snapshot of each computer's /etc directory to be used for restoring the state of that particular machine. What's the better approach?

    Read the article

  • some HTTPS sites getting blocked on one machine in network

    - by shadowfoxmi
    I have a few computers connected to the internet via a router. I have been having some trouble with this one Windows 7 desktop. I can browse most of the sites without any trouble but some sites where the sign in page switches to a secure connection (https), the page does not load. It's not all of the sites though. I'm able to sign into gmail and a few other services that I know use https . The sites I'm having trouble with; yahoo's sign in page and the one that I have been using to test across different systems, http://iforgot.apple.com (which switchs to https) ;this particular site, i can access from other computers on the network and my phone. I only have windows firewall running and AVG. I even tried to stopping windows firewall but it did not help. Everything was fine last week. All I have installed in the past week is VOIP softwares namely skype, ooVoo and windows live messenger. I'm not sure how to find out what's being blocked and why and how to unblock it? Any suggestions would be greatly appreciated.

    Read the article

  • Picasa duplicates everything into a `$My Pictures` folder.

    - by Barend
    My parents have a Windows XP laptop running Picasa, Dutch version of both. It's configured to put imported photos in C:\Documents and Settings\user\Mijn documenten\Mijn afbeeldingen, which is Windows XP's default My Pictures folder localized to Dutch. A while back I noticed disk space was going much faster than it should be. Turns out there was a Documents and Settings\user\Mijn documenten\$My Pictures pretty much the same size as the original one. This was well over a year ago. I figured it to be an internationalization bug, the $My Pictures thing looks like a placeholder that didn't get resolved. I figured it'd get fixed soon. It didn't. I threw out Picasa, tediously cleaned up the mess it left behind and replaced it by Windows Live Photo Gallery. My parents found WLPG to be unworkable and asked to get Picasa back. I reinstalled it, by now it's at 3.8.0 (build 117.29, 0). Wouldn't you have it, the mystery $My Pictures folder is back, 25GB of disk space has evaporated and it's the same mess it used to be. What's going on here? How do I stop it doing this?

    Read the article

  • Do email providers have to tell me which (inter)national agencies/institutes are requesting legal access to my account data?

    - by Juve
    I know this question is not technical, but i did not find the "stackoverflow for legal issues" and I guess all you super users out there might know the answer. Here is my (potential) problem: I have a free email account at a (inter)national email provider. I used the words "wikileaks" and "twitter" lately in my email. Some over-ambitious national security organization legally requests access to all accounts that behaved similarly. Q1: Can I request the who-, when-, and why-information related to this legal request from my provider? Does he have to tell me which (inter)national organizations (legally) requested my account data? Q2: Does the situation change if I live in Germany (and have a German provider)? I guess here are some German users. And I know that such a legal policy exists for our national credit rating agency. I can request who got access to my data, they have to tell me. Please answer only if you know a good answer, I don't want to start a long discussion on this none-technical question. Best regards, Juve

    Read the article

  • sage pay testing error

    - by Phil Jackson
    Hi, im trying to test my sage pay integration but to no avail. Here is my code: private function init_sagepay(){ extract( static::$post ); $settings = global_data::get_settings(); $strConnectTo = "TTEST"; $strVirtualDir = "VSPForm-Kit"; $strYourSiteFQDN = global_data::get_web_root(); $strVSPVendorName = $settings->sagepay_vendor; $strEncryptionPassword = "z5p************"; $strCurrency = static::$currency; $strVendorEMail = $settings->sagepay_email; $strTransactionType = "PAYMENT"; $strProtocol = "2.23"; if ( $strConnectTo == "LIVE" ) $strPurchaseURL = "https://live.sagepay.com/gateway/service/vspform-register.vsp"; elseif ( $strConnectTo == "TEST" ) $strPurchaseURL = "https://test.sagepay.com/gateway/service/vspform-register.vsp"; elseif( $strConnectTo == 'TTEST' ) $strPurchaseURL = 'https://test.sagepay.com/Simulator/VSPServerGateway.asp?Service=VendorRegisterTx'; else $strPurchaseURL = "https://test.sagepay.com/Simulator/VSPDirectGateway.asp"; $details = self::get_member_details(); $thisOrderDeteails = 'order details...'; $ThisVendorTxCode = 'fdsdgfd'; $ThisAmount = $total; $ThisCurrency = static::$currency; $ThisDescription = "description..."; $ThisCustomerEmail = $details->email; $ThisCustomerName = $details->first_name . " " . $details->last_name; $ThisVendorEmail = $strVendorEMail; $ThisApplyAVSCV2 = 1; $ThisApply3DSecure = 1; $ThisDeliveryAddress = $address_line_1 . ", " . $address_line_2 . ", " . $address_line_3 . ", " . $address_line_4 . ", " . $country; $ThisDeliveryPostCode = $postcode; $address_full = $ThisDeliveryAddress . ' ' . $ThisDeliveryPostCode; $ThisBillingAddress = $details->address_line_1 . ", " . $details->address_line_2 . ", " . $details->address_line_3 . ", " . $details->address_line_4 . ", " . $details->country; $ThisBillingPostCode = $details->postcode; // new 2.22 fields $ThisContactNumber = $details->home_number; $ThisContactFax = $details->fax_number; $ThisAllowGiftAid = ''; //$ThisApplyAVSCV2 = $_REQUEST[ 'ApplyAVSCV2' ]; //$ThisApply3DSecure = $_REQUEST[ 'Apply3DSecure' ]; $ShoppingBasket = array(); $x = 0; foreach( $items as $item ) { preg_match( "#^\[([^\]]+)\]\[([^\]]+)\]$#is", $item, $match ); $item = $match[1]; $price = $match[2]; $ShoppingBasket[$x][0] = $item; $ShoppingBasket[$x][1] = $price; $x++; } if ( isset( $ShoppingBasket ) ) { $ThisShoppingBasket = $ShoppingBasket; }else{ $ThisShoppingBasket = "OFF"; } //** Build the crypt string plaintext ** $stuff = "VendorTxCode=" . $ThisVendorTxCode . "&"; $stuff .= "Amount=" . $ThisAmount . "&"; $stuff .= "Currency=" . $ThisCurrency . "&"; $stuff .= "Description=" . $ThisDescription . "&"; $stuff .= "SuccessURL=" . $strYourSiteFQDN . "completed.php&"; $stuff .= "FailureURL=" . $strYourSiteFQDN . "notcompleted.php&"; if ($ThisCustomerEmail) { $stuff .= "CustomerEmail=" . $ThisCustomerEmail . "&"; } if ($ThisVendorEmail) { $stuff .= "VendorEmail=" . $ThisVendorEmail . "&"; } if ($ThisCustomerName) { $stuff .= "CustomerName=" . $ThisCustomerName . "&"; } if ($ThisDeliveryAddress) { $stuff .= "DeliveryAddress=" . $ThisDeliveryAddress . "&"; } if ($ThisDeliveryPostCode) { $stuff .= "DeliveryPostCode=" . $ThisDeliveryPostCode . "&"; } if ($ThisBillingAddress) { $stuff .= "BillingAddress=" . $ThisBillingAddress . "&"; } if ($ThisBillingPostCode) { $stuff .= "BillingPostCode=" . $ThisBillingPostCode . "&"; } // new 2.22 fields if ($ThisContactNumber) { $stuff .= "ContactNumber=" . $ThisContactNumber . "&"; } if ($ThisContactFax) { $stuff .= "ContactFax=" . $ThisContactFax . "&"; } if ($ThisAllowGiftAid) { $stuff .= "AllowGiftAid=" . $ThisAllowGiftAid . "&"; } if ($ThisApplyAVSCV2) { $stuff .= "ApplyAVSCV2=" . $ThisApplyAVSCV2 . "&"; } if ($ThisApply3DSecure) { $stuff .= "Apply3DSecure=" . $ThisApply3DSecure . "&"; } //echo $stuff; if ($ThisShoppingBasket=="ON") { $stuff .= "Basket=3:Sony SV-234 DVD Player:1:£170.20:£29.79:£199.99:£199.99:The Fast and The Furious Region 2 DVD:2:£17.01:£2.98:£19.99:£39.98:Delivery:1:£4.99:----:£4.99:£4.99&"; } $stuff .= "EMailMessage=For an update on the status of your order please email us at $ThisVendorEmail"; $crypt = self::base64Encode( self::SimpleXor( $stuff,$strEncryptionPassword ) ); $ThisDate = date('U'); ob_start(); ?> <form action="<?php echo $strPurchaseURL; ?>" method="post" id="sageForm" name="form1"> <input TYPE="hidden" name="VPSProtocol" value="<?php echo $strProtocol; ?>"> <input TYPE="hidden" name="TxType" value="<?php echo $strTransactionType; ?>"> <input TYPE="hidden" name="Vendor" value="<?php echo $strVSPVendorName; ?>"> <input TYPE="hidden" name="Crypt" value="<?php echo $crypt; ?>"> <input name="sbbutton" type="submit" value="Checkout" class="wpcf7-submit"> </form> <?php return ob_get_clean(); } when using "TEST" im getting an error: Status Detail: 5005 : The Vendor configuration is missing or invalid when using "TTEST" im getting an error: VPSProtocol=2.23 Status=INVALID StatusDetail=The VendorTxCode you supplied is an invalid length. VendorTxCodes should be between 1 to 40 characters long I cannot seem to figure this out at all. If anyone has any ideas it would be greatfuly appreciated. EDIT: $stuff echos out: VendorTxCode=fdsdgfd&Amount=45.60&Currency=GBP&Description=description...&SuccessURL=http://localhost/ecom_framework/&FailureURL=http://localhost/ecom_framework/&[email protected]&[email protected]&CustomerName=Luke Snowden&DeliveryAddress=mansfield, nottinghamshire, mansfield, nottinghamshire, United Kingdom&DeliveryPostCode=ng19 8pw&BillingAddress=mansfield, nottinghamshire, mansfield, nottinghamshire, United Kingdom&BillingPostCode=ng19 8pw&ContactNumber=0165656567&ApplyAVSCV2=1&Apply3DSecure=1&Basket=3:Blue Hat - black :2:£2£:0.00:£4.00:Blue Hat - brown :3:£3£:0.00:£9.00:Blue Hat - grey :4:£4£:0.00:£16.00:Delivery:1:£4.99EMailMessage=For an update on the status of your order please email us at [email protected]

    Read the article

  • Would anyone tell me how to fetch the media:thumb element's attribute from a json feed?

    - by ash
    I made a yahoo pipe that pulls up the atoms as json format; however, I can fetch and display all the elements in my html page except for the element's attribute. Would anyone tell me how to fetch the media:thumb element's attribute from a json feed? I am pasting the html page's code with javascript. If you save the html page and then view it in browser, you will see that all the necessary elements get output at html page except for the media:thumb as I cannot display the attribute of media:thumb when the feed is formatted as json. I am also pasting the some portion of the json feed so that you can have an idea what i am talking about. Please tell me how to retrieve attribute from media:thumb element of a json feed by using plain javascript but no server side code or javascript library. Thank you. function getFeed(feed){ var newScript = document.createElement('script'); newScript.type = 'text/javascript'; newScript.src = 'http://pipes.yahoo.com/pipes/pipe.run?_id=40616620df99780bceb3fe923cecd216&_render=json&_callback=piper'; document.getElementsByTagName("head")[0].appendChild(newScript); } function piper(feed){ var tmp=''; for (var i=0; i'; tmp+=feed.value.items[i].title+''; tmp+=feed.value.items[i].author.name+''; tmp+=feed.value.items[i].published+''; if (feed.value.items[i].description) { tmp+=feed.value.items[i].description+''; } tmp+='<hr>'; } document.getElementById('rssLayer').innerHTML=tmp; } </script> bchnbc .............................................................. Some portion of the json feed that gets generated by yahoo pipe .............................................................. piper({"count":2,"value":{"title":"myPipe","description":"Pipes Output","link":"http:\/\/pipes.yahoo.com\/pipes\/pipe.info?_id=f7f4175d493cf1171aecbd3268fea5ee","pubDate":"Fri, 02 Apr 2010 17:59:22 -0700","generator":"http:\/\/pipes.yahoo.com\/pipes\/","callback":"piper", "items": [{ "rights":"Attribution - Noncommercial - No Derivative Works", "link":"http:\/\/vodo.net\/mixtape1", "y:id":{"value":null,"permalink":"true"}, "content":{"content":"We're proud to be releasing this first VODO MIXTAPE. Actual tape might be a thing of the past, but before P2P, mixtapes were the most popular way of sharing popular culture the world had known -- and once called the 'most widely practiced American art form'. We want to resuscitate the spirit of the mixtape for this VODO MIXTAPE series: compilations of our favourite shorts, the weird, the wild and the wonky, all brought together in a temporary and uncomfortable company.","type":"text"}, "author": {"name":"Various"}, "description":"We're proud to be releasing this first VODO MIXTAPE. Actual tape might be a thing of the past, but before P2P, mixtapes were the most popular way of sharing popular culture the world had known -- and once called the 'most widely practiced American art form'. We want to resuscitate the spirit of the mixtape for this VODO MIXTAPE series: compilations of our favourite shorts, the weird, the wild and the wonky, all brought together in a temporary and uncomfortable company.", "media:thumbnail": { "url":"http:\/\/vodo.net\/\/thumbnails\/Mixtape1.jpg" }, "published":"2010-03-08-09:20:20 PM", "format": { "audio_bitrate":null, "width":"608", "xmlns":"http:\/\/xmlns.transmission.cc\/FileFormat", "channels":"2", "samplerate":"44100.0", "duration":"3092.36", "height":"352", "size":"733925376.0", "framerate":"25.0", "audio_codec":"mp3", "video_bitrate":"1898.0", "video_codec":"XVID", "pixel_aspect_ratio":"16:9" }, "y:title":"Mixtape #1: VODO's favourite short films", "title":"Mixtape #1: VODO's favourite short films", "id":null, "pubDate":"2010-03-08-09:20:20 PM", "y:published":{"hour":"3","timezone":"UTC","second":"0","month":"4","minute":"10","utime":"1270264200","day":"3","day_of_week":"6","year":"2010" }}, {"rights":"Attribution - Noncommercial - No Derivative Works","link":"http:\/\/vodo.net\/gilbert","y:id":{"value":"cd6584e06ea4ce7fcd34172f4bbd919e295f8680","permalink":"true"},"content":{"content":"A documentary short about Gilbert, the Beacon Hill \"town crier.\" For the last 9 years, since losing his job and becoming homeless, Gilbert has delivered the weather, sports, and breaking headlines from his spot on the Boston Common. Music (used with permission) in this piece is called \"Blue Bicycle\" by Dusseldorf-based pianist \/ composer Volker Bertelmann also known as Hauschka. Artistic Statement: This is the first in a series of profiles of people who I think are interesting, and who I see on almost a daily basis. I don't want to limit the series to people who live \"on the fringe,\" but it would be appropriate to say that most of the people I interview are eclectic, eccentric, and just a little bit unique. The art is in the viewing - but I hope to turn my lens on individuals that don't always color in the lines, whether they can help it or not.","type":"text"},"author":{"name":"Nathaniel Hansen"},"description":"A documentary short about Gilbert, the Beacon Hill \"town crier.\" For the last 9 years, since losing his job and becoming homeless, Gilbert has delivered the weather, sports, and breaking headlines from his spot on the Boston Common. Music (used with permission) in this piece is called \"Blue Bicycle\" by Dusseldorf-based pianist \/ composer Volker Bertelmann also known as Hauschka. Artistic Statement: This is the first in a series of profiles of people who I think are interesting, and who I see on almost a daily basis. I don't want to limit the series to people who live \"on the fringe,\" but it would be appropriate to say that most of the people I interview are eclectic, eccentric, and just a little bit unique. The art is in the viewing - but I hope to turn my lens on individuals that don't always color in the lines, whether they can help it or not.","media:thumbnail":{"url":"http:\/\/vodo.net\/\/thumbnails\/gilbert.jpeg"},"published":"2010-03-03-10:37:05 AM","format":{"audio_bitrate":null,"width":"624","xmlns":"http:\/\/xmlns.transmission.cc\/FileFormat","channels":"2","samplerate":null,"duration":"373.673","height":"352","size":"123321266.0","framerate":null,"audio_codec":"mp3","video_bitrate":null,"video_codec":"XVID","pixel_aspect_ratio":"16:9"},"y:title":"Gilbert","title":"Gilbert","id":"cd6584e06ea4ce7fcd34172f4bbd919e295f8680","pubDate":"2010-03-03-10:37:05 AM","y:published":{"hour":"3","timezone":"UTC","second":"0","month":"4","minute":"10","utime":"1270264200","day":"3","day_of_week":"6","year":"2010" }} ] }})

    Read the article

  • Managing the layout of a Java MainFrame of Canvas3d

    - by John N
    Hi, Im trying to organise the layout of four canvas3d objects in a single MainFrame. Iv tried using some layout managers but none are working (or im doing it wrong). Can anyone give me advice or point me to a way to get this to display the four canvas's as a grid of four? Thanks, John public class Main { public static void Main(){ Window win = new Window(); } } import javax.media.j3d.BranchGroup; import javax.media.j3d.Canvas3D; import javax.media.j3d.Locale; import javax.media.j3d.PhysicalBody; import javax.media.j3d.PhysicalEnvironment; import javax.media.j3d.Transform3D; import javax.media.j3d.TransformGroup; import javax.media.j3d.View; import javax.media.j3d.ViewPlatform; import javax.media.j3d.VirtualUniverse; import javax.vecmath.Vector3f; import com.sun.j3d.utils.picking.PickCanvas; public class Universe { boolean camera = true; Canvas3D canvas1, canvas2, canvas3, canvas4; VirtualUniverse universe; Locale locale; TransformGroup vpTrans1, vpTransRight, vpTransFront, vpTransPers; TransformGroup mouseTransform = null; View view1, view2, view3, view4; BranchGroup scene; PickCanvas pickCanvas1 = null; PickCanvas pickCanvas2 = null; PickCanvas pickCanvas3 = null; PickCanvas pickCanvas4 = null; BranchGroup obj = new BranchGroup(); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); //Temp vars for cam movement public Universe(Canvas3D c1, Canvas3D c2, Canvas3D c3, Canvas3D c4, BranchGroup scene) { this.canvas1 = c1; this.canvas2 = c2; this.canvas3 = c3; this.canvas4 = c4; this.scene = scene; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view1 = new View(); view1.addCanvas3D(c1); view1.addCanvas3D(c2); view1.addCanvas3D(c3); view1.addCanvas3D(c4); view1.setPhysicalBody(body); view1.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 2.0f)); ViewPlatform vp = new ViewPlatform(); vpTrans1 = new TransformGroup(t); vpTrans1.addChild(vp); vpRoot.addChild(vpTrans1); vpRoot.addChild(scene); view1.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } } import javax.media.j3d.BranchGroup; import javax.media.j3d.Canvas3D; import javax.media.j3d.Locale; import javax.media.j3d.PhysicalBody; import javax.media.j3d.PhysicalEnvironment; import javax.media.j3d.Transform3D; import javax.media.j3d.TransformGroup; import javax.media.j3d.View; import javax.media.j3d.ViewPlatform; import javax.media.j3d.VirtualUniverse; import javax.vecmath.Vector3f; import com.sun.j3d.utils.picking.PickCanvas; public class Universe { boolean camera = true; Canvas3D canvas1, canvas2, canvas3, canvas4; VirtualUniverse universe; Locale locale; TransformGroup vpTrans1, vpTransRight, vpTransFront, vpTransPers; TransformGroup mouseTransform = null; View view1, view2, view3, view4; BranchGroup scene; PickCanvas pickCanvas1 = null; PickCanvas pickCanvas2 = null; PickCanvas pickCanvas3 = null; PickCanvas pickCanvas4 = null; BranchGroup obj = new BranchGroup(); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); //Temp vars for cam movement public Universe(Canvas3D c1, Canvas3D c2, Canvas3D c3, Canvas3D c4, BranchGroup scene) { this.canvas1 = c1; this.canvas2 = c2; this.canvas3 = c3; this.canvas4 = c4; this.scene = scene; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view1 = new View(); view1.addCanvas3D(c1); view1.addCanvas3D(c2); view1.addCanvas3D(c3); view1.addCanvas3D(c4); view1.setPhysicalBody(body); view1.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 2.0f)); ViewPlatform vp = new ViewPlatform(); vpTrans1 = new TransformGroup(t); vpTrans1.addChild(vp); vpRoot.addChild(vpTrans1); vpRoot.addChild(scene); view1.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } }

    Read the article

  • MediaElement.js setSrc() Loading The File But Not Changing pluginType

    - by doubleJ
    I'm working on a page that uses mediaelement.js to play mp3/mp4/wmv (yes, we have a lot of wmv). I have a list of links and those links should change the player. My effort is to make the changes to the player through javascript so that the page doesn't refresh. This code is working, but it refreshes every time. See a live demo of the non-ajax version. <?php $file = null; $file = $_GET["file"]; $format = null; if (preg_match("/mp4/i", $file)) $format = "mp4"; if (preg_match("/webm/i", $file)) $format = "webm"; if (preg_match("/wmv/i", $file)) $format = "wmv"; if (preg_match("/mp3/i", $file)) $format = "mp3"; if (preg_match("/ogg/i", $file)) $format = "ogg"; $mime = null; if ($format == "mp4") $mime = "video/mp4"; if ($format == "webm") $mime = "video/webm"; if ($format == "wmv") $mime = "video/wmv"; if ($format == "mp3") $mime = "audio/mp3"; if ($format == "ogg") $mime = "audio/ogg"; $element = "video"; if ($format == "mp3" || $format == "ogg") $element = "audio"; // you have to escape (\) the escape (\) character (hehehe...) $poster = "media\\120701Video.jpg"; $height = "360"; if ($format == "mp3") $height = "30"; ?> <!doctype html> <html> <head> <meta charset="utf-8"> <title>Embed</title> <link rel="stylesheet" href="include/johndyer-mediaelement-b090320/build/mediaelementplayer.min.css"> <style> audio {width:640px; height:30px;} video {width:640px; height:360px;} </style> <script src="include/johndyer-mediaelement-b090320/build/jquery.js"></script> <script src="include/johndyer-mediaelement-b090320/build/mediaelement-and-player.js"></script> </head> <body> <ul> <li><a href="embed.php">Reset</a></li> <li><a href="?file=media/120701Video-AnyVideoConverter.mp4">Alternative (mp4)</a></li> <li><a href="?file=media/120701Video-Ffmpeg-Defaults.webm">Alternative (webm)</a></li> <li><a href="?file=media/AreYouHurting-Death.wmv">Alternative (wmv)</a><li> <li><a href="?file=media/AreYouHurting-Death.mp3">Alternative (mp3)</a></li> </ul> <?php if ($file) { ?> <video src="<?php echo $file; ?>" controls poster="<?php echo $poster; ?>" width="640" height="360"></video> <div id="type"></div> <script> var video = document.getElementsByTagName("video")[0]; var player = new MediaElementPlayer(video, { success: function(player) { $('#type').html(player.pluginType); } }); <?php } ?> </script> </body> </html> This code requires <video> to be loaded, initially and with a file, so that the player mode (pluginType) is set. It will, then, only play formats that the pre-established mode supports (firefox in native mode won't play mp4). See a live demo of the ajax version. <!doctype html> <html> <head> <meta charset="utf-8"> <title>Embed</title> <link rel="stylesheet" href="http://www.mediaelementjs.com/js/mejs-2.9.2/mediaelementplayer.min.css"> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js"></script> <script src="http://www.mediaelementjs.com/js/mejs-2.9.2/mediaelement-and-player.js"></script> </head> <body> <ul> <li><a href="javascript:player.pause(); player.setSrc('media/120701Video-AnyVideoConverter.mp4'); player.load(); player.play();">Alternative (mp4)</a></li> <li><a href="javascript:player.pause(); player.setSrc('media/120701Video-Ffmpeg-Defaults.webm'); player.load(); player.play();">Alternative (webm)</a></li> <li><a href="javascript:player.pause(); player.setSrc('media/AreYouHurting-Death.wmv'); player.load(); player.play();">Alternative (wmv)</a></li> <li><a href="javascript:player.pause(); player.setSrc('media/AreYouHurting-Death.mp3'); player.load(); player.play();">Alternative (mp3)</a></li> </ul> <video controls src="media/WordProductionCenter.mp4"></video> <div id="type"></div> <script> var video = document.getElementsByTagName("video")[0]; var player = new MediaElementPlayer(video, { success: function(player) { $('#type').html(player.pluginType); } }); </script> </body> </html> It seems like I need something like setType(), but I see no such option. I've read a couple pages that referenced refreshing the DOM after the javascript runs, but I haven't been able to successfully do it (I know enough about javascript to hack things around and get stuff working, but not enough to create whole new things). It is worth noting that Silverlight doesn't work with Internet Explorer 8 or Safari (not sure if it's my code, mejs, or the browsers). Also, neither Silverlight nor Flash play mp3 or webm (again, not sure where the problem lies). Is there a way to dynamically load different types of files into mediaelement?

    Read the article

  • Adapting a HTML/CSS dropdown menu to multi-level

    - by Adam Nygate
    Ive been trying to make the original dropdown into multi level for a site im working on. All of my attempts have failed (. For some reason i can only do "margin-right" to align the elements, and this causes some problems. I think it has something to do with the position attribute. Here is my HTML: <ol id="nav"> <li><a href="index.php">Home</a></li> <li class="dropdown_alignedLeft"> <a href="">Products</a> <ul><li class="dropdown_alignedRight"> <a href="">iPoP</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=ipop">iPoP - Network Solutions for Vessels</a></li></ul><li class="dropdown_alignedRight"> <a href="">Cameras</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=icam">iCam 501 Ultra - Intrinsically Safe Digital Camera with Flash</a></li></ul><li class="dropdown_alignedRight"> <a href="">BNWAS</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=bnwas">BNWAS - Bridge Navigation Watch Alarm System</a></li></ul><li class="dropdown_alignedRight"> <a href="">Lighting</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=peli">Peli 2690 - Intrinsically Safe LED Head Lamp</a></li></ul><li class="dropdown_alignedRight"> <a href="">Communication</a> <ul style="margin-right:-400px; top:0px;-webkit-border-top-right-radius: 5px;border-top-right-radius: 5px;-moz-border-radius-topright: 5px;"><li><a href="customers.php?category=handy">Ex-Handy 06 - Intrinsically Safe Cell Phone</a></li></ul> </ul> <li class="dropdown_alignedLeft"> <a href="">Customers</a> <ul> <li><a href="customers.php?category=maritime">Maritime</a></li> <li><a href="customers.php?category=non">Non-Maritime</a></li> <li class="dropdown_lastItem"><a href="customers.php?category=organizations">Regulatory Organizations</a></li> </ul> <li><a href="order.php">Product Enquiry</a></li> <li><a href="contact.php">Contact Us</a></li> <li class="dropdown_alignedLeft"> <a href="">Company</a> <ul> <!-- <li><a href="">About Us</a></li> --> <li><a href="newsandpr.php?category=News">News</a></li> <li class="dropdown_lastItem"><a href="newsandpr.php?category=Press Release">Press Releases</a></li> </ul> </ol> And my CSS: #nav { float:right; margin:15px 0 0; } #nav li { float:left; } #nav li a { display:block; font-family:"PT Sans","Helvetica Neue",Arial,sans-serif; font-size:16px; text-decoration:none; color:#2B95C8; padding:10px 20px 20px; } .dropdown_alignedLeft,.dropdown_alignedRight { position:relative; } #nav .dropdown_alignedLeft>a,#nav .dropdown_alignedRight>a { background:url(../images/dropdown_arrow_blue.png) no-repeat top right; padding:10px 30px 20px 20px; } #nav .dropdown_alignedLeft:hover>a,#nav .dropdown_alignedRight:hover>a { -moz-border-radius-topleft:5px; -moz-border-radius-topright:5px; -moz-border-radius-bottomright:0; -moz-border-radius-bottomleft:0; -webkit-border-top-left-radius:5px; -webkit-border-top-right-radius:5px; -webkit-border-bottom-right-radius:0; -webkit-border-bottom-left-radius:0; border-top-left-radius:5px; border-top-right-radius:5px; border-bottom-right-radius:0; border-bottom-left-radius:0; color:#FFF; background:#2378A1 url(../images/dropdown_arrow_blue.png) no-repeat bottom right; } .dropdown_alignedLeft ul,.dropdown_alignedRight ul { display:none; } #nav .dropdown_alignedLeft:hover>ul,#nav .dropdown_alignedRight:hover>ul { display:block; z-index:100; position:absolute; top:50px; -moz-border-radius-topleft:0; -moz-border-radius-topright:0; -moz-border-radius-bottomright:5px; -moz-border-radius-bottomleft:5px; -webkit-border-top-left-radius:0; -webkit-border-top-right-radius:0; -webkit-border-bottom-right-radius:5px; -webkit-border-bottom-left-radius:5px; border-top-left-radius:0; border-top-right-radius:0; border-bottom-right-radius:5px; border-bottom-left-radius:5px; background:#2378A1; padding:0 0 6px; } #nav .dropdown_alignedRight:hover>ul { top:50px; right:0; text-align:right; } #nav li ul li { float:none; border-bottom:1px dashed #2B95C8; margin:0 20px; } #nav li ul li.dropdown_innerTitle { border:none; font-family:"Helvetica Neue",Arial,sans-serif; font-size:15px; white-space:nowrap; color:#C8DDE7; margin:10px 20px 0; padding:10px 0; } #nav li ul li.dropdown_lastItem { border:none; } #nav li ul li a { font-family:"Helvetica Neue",Arial,sans-serif; font-size:13px; color:#FFF; white-space:nowrap; padding:10px 0 9px; } #nav>li:hover>a,#nav li .current_page { color:#2378A1; background:url(../images/current_page_arrow_blue.png) no-repeat center bottom; } #nav li ul li a:hover { color: #C8DDE7; } For a live version of the menu, please go here: JSFiddle - Live Menu

    Read the article

  • http server implentation, the page does not show properly

    - by none
    well, as i am doing a small project of coding an http server. the code is at http://code.google.com/p/reactor/ the current puzzle is when asked to parse a page with java script and css. As an http server it just sends a page (copied from another website) and it parsed inproperly. when a simple html page is been parse , by my firefox, it shows ok, however when parsing a more complex page(css+javascript) the page is all wired like this : ???? ????? if(getCookie('pais999')==null){varisToplayerDouble="True";isToplayerDouble=(isToplayerDouble=="True")?true:falsevarToplayerCookieName='pais999';varTopLayerCookieExpiredDays=1;varToplayerLink='http://xads.zedo.com/ads2/c?a=239671;g=0;c=455000000;i=0;x=7168;n=455;s=0;k=http://www.pais.co.il/Pais/Games/Lotto/';varToplayerImpression='http://l4.zedo.com/log/p.gif?a=239671;c=455000000;x=7168;n=455;e=i;i=0;s=0;z='+Math.random();varToplayerBigPath='pais/January2007/98one_toplayer.swf';varToplayerSmallPath='pais/January2007/98one_reminder.swf';varToplayerBigWidth=1005;varToplayerBigHeight=500;varToplayerSmallWidth=100;varToplayerSmallHeight=100;varToplayerBigLeft=(0==0)?resWidth/2-ToplayerBigWidth/2:resWidth/2-ToplayerBigWidth/2+0varToplayerBigTop=0;varToplayerSmallLeft=resWidth-ToplayerSmallWidth-0;varToplayerSmallTop=0;varSecondsToChangeBigToSmall=15;}elseif(getCookie('NF999')==null){varisToplayerDouble="True";isToplayerDouble=(isToplayerDouble=="True")?true:falsevarToplayerCookieName='NF999';varTopLayerCookieExpiredDays=1;varToplayerLink='http://xads.zedo.com/ads2/c?a=238663;g=0;c=455000000;i=0;x=7168;n=455;s=0;k=http://www.new-pharm.co.il/SkiGame/?ToolID=OLJD8O';varToplayerImpression='http://l4.zedo.com/log/p.gif?a=238663;c=455000000;x=7168;n=455;e=i;i=0;s=0;z='+Math.random();varToplayerBigPath='NewFarm/Ski/995ONE_TopLayer_550x360.swf';varToplayerSmallPath='NewFarm/Ski/995ONE_Reminder_100x100.swf';varToplayerBigWidth=550;varToplayerBigHeight=360;varToplayerSmallWidth=100;varToplayerSmallHeight=100;varToplayerBigLeft=(0==0)?resWidth/2-ToplayerBigWidth/2:resWidth/2-ToplayerBigWidth/2+0varToplayerBigTop=0;varToplayerSmallLeft=resWidth-ToplayerSmallWidth-0;varToplayerSmallTop=0;varSecondsToChangeBigToSmall=15;}elseif(1==0){}$("divToplayerBig").style.width=ToplayerBigWidth;$("divToplayerBig").style.height=ToplayerBigHeight;$("divToplayerBig").style.left=resWidth/2-ToplayerBigWidth/2;$("divToplayerSmall").style.width=ToplayerSmallWidth;$("divToplayerSmall").style.height=ToplayerSmallHeight;$("divToplayerSmall").style.right=ToplayerSmallWidthvartopOff=0;if(ToplayerBigTop0)topOff=resHeight-ToplayerBigHeight+ToplayerBigTop;varisMain=false;#divToplayerBig{position:absolute;right:20px;bottom:1px;}bodydiv#divToplayerBig{position:fixed;}#divToplayerSmall{position:absolute;right:20px;bottom:10px;}bodydiv#divToplayerSmall{position:fixed;}????|??????LIVE|???????????|ONE???????|ONETV |????'??|BigONE|?????????| CrazyONE | where the source code of the html is : ONE:???:??????????????????????????? ????  ????? if(getCookie('pais999')==null){varisToplayerDouble="True";isToplayerDouble=(isToplayerDouble=="True")?true:falsevarToplayerCookieName='pais999';varTopLayerCookieExpiredDays=1;varToplayerLink='http://xads.zedo.com/ads2/c?a=239671;g=0;c=455000000;i=0;x=7168;n=455;s=0;k=http://www.pais.co.il/Pais/Games/Lotto/';varToplayerImpression='http://l4.zedo.com/log/p.gif?a=239671;c=455000000;x=7168;n=455;e=i;i=0;s=0;z='+Math.random();varToplayerBigPath='pais/January2007/98one_toplayer.swf';varToplayerSmallPath='pais/January2007/98one_reminder.swf';varToplayerBigWidth=1005;varToplayerBigHeight=500;varToplayerSmallWidth=100;varToplayerSmallHeight=100;varToplayerBigLeft=(0==0)?resWidth/2-ToplayerBigWidth/2:resWidth/2-ToplayerBigWidth/2+0varToplayerBigTop=0;varToplayerSmallLeft=resWidth-ToplayerSmallWidth-0;varToplayerSmallTop=0;varSecondsToChangeBigToSmall=15;}elseif(getCookie('NF999')==null){varisToplayerDouble="True";isToplayerDouble=(isToplayerDouble=="True")?true:falsevarToplayerCookieName='NF999';varTopLayerCookieExpiredDays=1;varToplayerLink='http://xads.zedo.com/ads2/c?a=238663;g=0;c=455000000;i=0;x=7168;n=455;s=0;k=http://www.new-pharm.co.il/SkiGame/?ToolID=OLJD8O';varToplayerImpression='http://l4.zedo.com/log/p.gif?a=238663;c=455000000;x=7168;n=455;e=i;i=0;s=0;z='+Math.random();varToplayerBigPath='NewFarm/Ski/995ONE_TopLayer_550x360.swf';varToplayerSmallPath='NewFarm/Ski/995ONE_Reminder_100x100.swf';varToplayerBigWidth=550;varToplayerBigHeight=360;varToplayerSmallWidth=100;varToplayerSmallHeight=100;varToplayerBigLeft=(0==0)?resWidth/2-ToplayerBigWidth/2:resWidth/2-ToplayerBigWidth/2+0varToplayerBigTop=0;varToplayerSmallLeft=resWidth-ToplayerSmallWidth-0;varToplayerSmallTop=0;varSecondsToChangeBigToSmall=15;}elseif(1==0){}$("divToplayerBig").style.width=ToplayerBigWidth;$("divToplayerBig").style.height=ToplayerBigHeight;$("divToplayerBig").style.left=resWidth/2-ToplayerBigWidth/2;$("divToplayerSmall").style.width=ToplayerSmallWidth;$("divToplayerSmall").style.height=ToplayerSmallHeight;$("divToplayerSmall").style.right=ToplayerSmallWidthvartopOff=0;if(ToplayerBigTop0)topOff=resHeight-ToplayerBigHeight+ToplayerBigTop;varisMain=false;#divToplayerBig{position:absolute;right:20px;bottom:1px;}bodydiv#divToplayerBig{position:fixed;}div#divToplayerBig{right:auto;bottom:auto;left:expression((-20-divToplayerBig.offsetWidth+(document.documentElement.clientWidth?document.documentElement.clientWidth:document.body.clientWidth)+(ignoreMe2=document.documentElement.scrollLeft?document.documentElement.scrollLeft:document.body.scrollLeft))+'px');top:expression((0-divToplayerBig.offsetHeight-topOff+(document.documentElement.clientHeight?document.documentElement.clientHeight:document.body.clientHeight)+(ignoreMe=document.documentElement.scrollTop?document.documentElement.scrollTop:document.body.scrollTop))+'px');}#divToplayerSmall{position:absolute;right:20px;bottom:10px;}bodydiv#divToplayerSmall{position:fixed;}div#divToplayerSmall{right:auto;bottom:auto;left:expression((-20-divToplayerSmall.offsetWidth+(document.documentElement.clientWidth?document.documentElement.clientWidth:document.body.clientWidth)+(ignoreMe2=document.documentElement.scrollLeft?document.documentElement.scrollLeft:document.body.scrollLeft))+'px');top:expression((0-divToplayerSmall.offsetHeight+(document.documentElement.clientHeight?document.documentElement.clientHeight:document.body.clientHeight)+(ignoreMe=document.documentElement.scrollTop?document.documentElement.scrollTop:document.body.scrollTop))+'px');}varisTopTrans=(ToplayerBigPath.indexOf("transparent")-1)?false:true;varisRemTrans=(ToplayerSmallPath.indexOf("transparent")-1)?false:true;vartop1session=3;vartop2session=5;InitToplayer(isTopTrans,isRemTrans);window.onload=StartToplayer;????|??????LIVE|???????????|ONE???????|ONETV |????'??|BigONE|?????????|  CrazyONE |????????????????????????????????????????????????????????19/01/07  19:30?????????????????????-?????:?????????????????????????19/01/07  18:43??????????????:??????????????????????19/01/07  17:41???:??????????????????????????????????19/01/07  16:49?????:??????"?????????????/?????1:2,??????"??????19/01/07  16:45????????????????????????????,?????2.5???????????????19/01/07  16:37???????:???"?????????????????-19:30?????????????19/01/07  14:32?????"?????????-18:30?????????"????????,????'??????19/01/07  14:45????????????????????????????????"?:??????????????19/01/07  14:37??????????:??????????????????????????????0:019/01/07  13:46varswfPeleSmall=newSWFObject("http://images.one.co.il/images/PeleEmulator/emulator_pelephone_01a.swf","peleSmall",160,470,"6","#FFFFFF");swfPeleSmall.addParam("quality","high");swfPeleSmall.addParam("wmode","transparent");swfPeleSmall.write("divPeleSmall");varswfPeleBig=newSWFObject("http://images.one.co.il/images/PeleEmulator/emulator_pelephone_02d.swf","peleBig",400,470,"6","#FFFFFF");swfPeleBig.addParam("quality","high");swfPeleBig.addParam("wmode","transparent");swfPeleBig.write("divWithBig");???:???????????????????????????????????????-ONE????????????????????????????????????????????.????????,???????????1:2,?????????????:"???????????"DisplayFlash("W_S_round_border_pic.swf","156","201","1","style=position:absolute");?????????????????????????(??????)?????????                          19/01/20077:26???????????????(????)????????????????????????????6:3,5:7?-5:7???????????????????????,???????23?????.?????,????????????????????????????????,???????????????????????????????????????????,????????????????????.??????????????????????????,??????????????????????????.????????????????????????????-1:1?????????.?????????????????????????????'?????????????????????????????.?????????????.???????????????????????????????(16???????),???????????????????????????????????????3???????,???????????????????????.????????- (only part of of the page presentation in firefox and page source html) why is it happening? what is midding in the http response? StringBuffer tResponse = new StringBuffer(); tResponse.append("HTTP/1.1 200 OK\n"); tResponse.append("Date: "+new Date().toString() +'\n'); tResponse.append("server: http-reactor/0.1-dev\n"); tResponse.append("last-Modified:"+ d.toString() +'\n'); tResponse.append("Content-Type: text/html; charset=windows-1255\n"); tResponse.append("Accept-Language: he; q=1.0, en; q=0.5:); tResponse.append("Content-Length: "+tFileContent.length()+'\n'); tResponse.append('\n'); tResponse.append(tFileContent); public StringBuffer FetchData(String FileName) throws FileNotFoundException{ StringBuffer tFileContent = new StringBuffer(); if (FileName.contains("../")) throw new SecurityException(); if (FileName.equals("/")) FileName = "\\index.html"; FileName.replace('/', '\\'); File f = new File(_root + FileName); Scanner scanner = new Scanner(f); while(scanner.hasNext()) tFileContent.append(scanner.next()); return generateResponse(tFileContent,f.lastModified()); } private StringBuffer generateResponse(StringBuffer tFileContent, long l) { StringBuffer tResponse = new StringBuffer(); Date d = new Date(l); tResponse.append("HTTP/1.1 200 OK\n"); tResponse.append("Date: "+new Date().toString() +'\n'); tResponse.append("server: http-reactor/0.1-dev\n"); tResponse.append("last-Modified:"+ d.toString() +'\n'); tResponse.append("Content-Type: text/html; charset=windows-1255\n"); tResponse.append("Accept-Language: he; q=1.0, en; q=0.5:); tResponse.append("Content-Length: "+tFileContent.length()+'\n'); tResponse.append('\n'); tResponse.append(tFileContent); return tResponse; }

    Read the article

  • (PHP) Validation, Security and Speed - Does my app have these?

    - by Devner
    Hi all, I am currently working on a building community website in PHP. This contains forms that a user can fill right from registration to lot of other functionality. I am not an Object-oriented guy, so I am using functions most of the time to handle my application. I know I have to learn OOPS, but currently need to develop this website and get it running soon. Anyway, here's a sample of what I let my app. do: Consider a page (register.php) that has a form where a user has 3 fields to fill up, say: First Name, Last Name and Email. Upon submission of this form, I want to validate the form and show the corresponding errors to the users: <form id="form1" name="form1" method="post" action="<?php echo $_SERVER['PHP_SELF']; ?>"> <label for="name">Name:</label> <input type="text" name="name" id="name" /><br /> <label for="lname">Last Name:</label> <input type="text" name="lname" id="lname" /><br /> <label for="email">Email:</label> <input type="text" name="email" id="email" /><br /> <input type="submit" name="submit" id="submit" value="Submit" /> </form> This form will POST the info to the same page. So here's the code that will process the POST'ed info: <?php require("functions.php"); if( isset($_POST['submit']) ) { $errors = fn_register(); if( count($errors) ) { //Show error messages } else { //Send welcome mail to the user or do database stuff... } } ?> <?php //functions.php page: function sql_quote( $value ) { if( get_magic_quotes_gpc() ) { $value = stripslashes( $value ); } else { $value = addslashes( $value ); } if( function_exists( "mysql_real_escape_string" ) ) { $value = mysql_real_escape_string( $value ); } return $value; } function clean($str) { $str = strip_tags($str, '<br>,<br />'); $str = trim($str); $str = sql_quote($str); return $str; } foreach ($_POST as &$value) { if (!is_array($value)) { $value = clean($value); } else { clean($value); } } foreach ($_GET as &$value) { if (!is_array($value)) { $value = clean($value); } else { clean($value); } } function validate_name( $fld, $min, $max, $rule, $label ) { if( $rule == 'required' ) { if ( trim($fld) == '' ) { $str = "$label: Cannot be left blank."; return $str; } } if ( isset($fld) && trim($fld) != '' ) { if ( isset($fld) && $fld != '' && !preg_match("/^[a-zA-Z\ ]+$/", $fld)) { $str = "$label: Invalid characters used! Only Lowercase, Uppercase alphabets and Spaces are allowed"; } else if ( strlen($fld) < $min or strlen($fld) > $max ) { $curr_char = strlen($fld); $str = "$label: Must be atleast $min character &amp; less than $max char. Entered characters: $curr_char"; } else { $str = 0; } } else { $str = 0; } return $str; } function validate_email( $fld, $min, $max, $rule, $label ) { if( $rule == 'required' ) { if ( trim($fld) == '' ) { $str = "$label: Cannot be left blank."; return $str; } } if ( isset($fld) && trim($fld) != '' ) { if ( !eregi('^[a-zA-Z0-9._-]+@[a-zA-Z0-9._-]+\.([a-zA-Z]{2,4})$', $fld) ) { $str = "$label: Invalid format. Please check."; } else if ( strlen($fld) < $min or strlen($fld) > $max ) { $curr_char = strlen($fld); $str = "$label: Must be atleast $min character &amp; less than $max char. Entered characters: $curr_char"; } else { $str = 0; } } else { $str = 0; } return $str; } function val_rules( $str, $val_type, $rule='required' ){ switch ($val_type) { case 'name': $val = validate_name( $str, 3, 20, $rule, 'First Name'); break; case 'lname': $val = validate_name( $str, 10, 20, $rule, 'Last Name'); break; case 'email': $val = validate_email( $str, 10, 60, $rule, 'Email'); break; } return $val; } function fn_register() { $errors = array(); $val_name = val_rules( $_POST['name'], 'name' ); $val_lname = val_rules( $_POST['lname'], 'lname', 'optional' ); $val_email = val_rules( $_POST['email'], 'email' ); if ( $val_name != '0' ) { $errors['name'] = $val_name; } if ( $val_lname != '0' ) { $errors['lname'] = $val_lname; } if ( $val_email != '0' ) { $errors['email'] = $val_email; } return $errors; } //END of functions.php page ?> OK, now it might look like there's a lot, but lemme break it down target wise: 1. I wanted the foreach ($_POST as &$value) and foreach ($_GET as &$value) loops to loop through the received info from the user submission and strip/remove all malicious input. I am calling a function called clean on the input first to achieve the objective as stated above. This function will process each of the input, whether individual field values or even arrays and allow only tags and remove everything else. The rest of it is obvious. Once this happens, the new/cleaned values will be processed by the fn_register() function and based on the values returned after the validation, we get the corresponding errors or NULL values (as applicable). So here's my questions: 1. This pretty much makes me feel secure as I am forcing the user to correct malicious data and won't process the final data unless the errors are corrected. Am I correct? Does the method that I follow guarantee the speed (as I am using lots of functions and their corresponding calls)? The fields of a form differ and the minimum number of fields I may have at any given point of time in any form may be 3 and can go upto as high as 100 (or even more, I am not sure as the website is still being developed). Will having 100's of fields and their validation in the above way, reduce the speed of application (say upto half a million users are accessing the website at the same time?). What can I do to improve the speed and reduce function calls (if possible)? 3, Can I do something to improve the current ways of validation? I am holding off object oriented approach and using FILTERS in PHP for the later. So please, I request you all to suggest me way to improve/tweak the current ways and suggest me if the script is vulnerable or safe enough to be used in a Live production environment. If not, what I can do to be able to use it live? Thank you all in advance.

    Read the article

  • External USB drive is failing

    - by dma_k
    I have an external USB 2.0 drive WD My Book Mirror Edition, running in RAID 1 (mirroring) mode. A while ago the hard drive started to fail: it stops responding (directories are not listed returning an error after a big timeout). Sometimes it works for weeks before a failure, sometimes – few hours. Small write operations (like removing few files or editing a small file) do not harm, but when copying large files to the drive over the network, or creating the archive locally, the kernel dumps. Also interesting to note that once kernel has failed, Linux does not want to reboot normally (reboot hangs); when Linux box is shutdown with power button, WD drive does not go to sleep mode (as it usually does): leds continue to run, pressing and holding the "shutdown" button on drive's back panel does not do anything; only unplugging the power cord helps. Here goes the boot log: Aug 16 00:32:21 kernel: [ 1.514106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 16 00:32:21 kernel: [ 1.657738] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 1.673747] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 1.673751] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.725224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 16 00:32:21 kernel: [ 1.741647] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 16 00:32:21 kernel: [ 1.761790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Aug 16 00:32:21 kernel: [ 1.761873] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 Aug 16 00:32:21 kernel: [ 1.796043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 16 00:32:21 kernel: [ 1.879069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 16 00:32:21 kernel: [ 1.895446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 1.911796] usb usb1: Product: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.928015] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd Aug 16 00:32:21 kernel: [ 1.944331] usb usb1: SerialNumber: 0000:00:1d.7 Aug 16 00:32:21 kernel: [ 1.961285] usb usb1: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 1.994412] hub 1-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.010864] hub 1-0:1.0: 8 ports detected Aug 16 00:32:21 kernel: [ 2.085939] uhci_hcd: USB Universal Host Controller Interface driver Aug 16 00:32:21 kernel: [ 2.191945] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 2.226029] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.226034] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.243237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 16 00:32:21 kernel: [ 2.260390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 Aug 16 00:32:21 kernel: [ 2.277517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.294815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.312173] usb usb2: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.329534] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.346828] usb usb2: SerialNumber: 0000:00:1d.0 Aug 16 00:32:21 kernel: [ 2.412989] usb usb2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.430651] usb 1-2: new high speed USB device using ehci_hcd and address 2 Aug 16 00:32:21 kernel: [ 2.449046] hub 2-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.466514] hub 2-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.484639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 16 00:32:21 kernel: [ 2.537750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.537756] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.555085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 16 00:32:21 kernel: [ 2.572231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 Aug 16 00:32:21 kernel: [ 2.589593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.606869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.624134] usb usb3: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.641329] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.658505] usb usb3: SerialNumber: 0000:00:1d.1 Aug 16 00:32:21 kernel: [ 2.675843] usb usb3: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.692864] hub 3-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.709651] hub 3-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.727378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 16 00:32:21 kernel: [ 2.768252] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.768258] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.806679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 16 00:32:21 kernel: [ 2.824117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 Aug 16 00:32:21 kernel: [ 2.841405] usb 1-2: New USB device found, idVendor=1058, idProduct=1104 Aug 16 00:32:21 kernel: [ 2.858448] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 16 00:32:21 kernel: [ 2.875347] usb 1-2: Product: My Book Aug 16 00:32:21 kernel: [ 2.892113] usb 1-2: Manufacturer: Western Digital Aug 16 00:32:21 kernel: [ 2.908915] usb 1-2: SerialNumber: 575532553130303530353538 Aug 16 00:32:21 kernel: [ 2.943242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.960405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.977615] usb usb4: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.994687] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.011711] usb usb4: SerialNumber: 0000:00:1d.2 Aug 16 00:32:21 kernel: [ 3.029589] usb usb4: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.082027] sd 2:0:0:0: [sda] Attached SCSI disk Aug 16 00:32:21 kernel: [ 3.103953] usb 1-2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.122625] hub 4-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.140484] hub 4-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.161680] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Aug 16 00:32:21 kernel: [ 3.181257] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 3.181263] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.198614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 16 00:32:21 kernel: [ 3.216012] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 Aug 16 00:32:21 kernel: [ 3.249877] Uniform CD-ROM driver Revision: 3.20 Aug 16 00:32:21 kernel: [ 3.267765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 3.284947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 3.302023] usb usb5: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.319215] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.336298] usb usb5: SerialNumber: 0000:00:1d.3 Aug 16 00:32:21 kernel: [ 3.368377] Initializing USB Mass Storage driver... Aug 16 00:32:21 kernel: [ 3.390652] usbcore: registered new interface driver hiddev Aug 16 00:32:21 kernel: [ 3.408109] scsi4 : SCSI emulation for USB Mass Storage devices Aug 16 00:32:21 kernel: [ 3.425281] sr 0:0:1:0: Attached scsi CD-ROM sr0 Aug 16 00:32:21 kernel: [ 3.438978] sr 0:0:1:0: Attached scsi generic sg0 type 5 Aug 16 00:32:21 kernel: [ 3.456328] usbcore: registered new interface driver usb-storage Aug 16 00:32:21 kernel: [ 3.474564] usb-storage: device found at 2 Aug 16 00:32:21 kernel: [ 3.474567] usb-storage: waiting for device to settle before scanning Aug 16 00:32:21 kernel: [ 3.475320] sd 2:0:0:0: Attached scsi generic sg1 type 0 Aug 16 00:32:21 kernel: [ 3.492587] USB Mass Storage support registered. Aug 16 00:32:21 kernel: [ 3.510930] usb usb5: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.531076] hub 5-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.548399] hub 5-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.591743] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input2 Aug 16 00:32:21 kernel: [ 3.609515] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2/input1 Aug 16 00:32:21 kernel: [ 3.627466] usbcore: registered new interface driver usbhid Aug 16 00:32:21 kernel: [ 8.581664] usb-storage: device scan complete Aug 16 00:32:21 kernel: [ 8.624270] scsi 4:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.655135] scsi 4:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.675393] sd 4:0:0:0: Attached scsi generic sg2 type 0 Aug 16 00:32:21 kernel: [ 8.698669] scsi 4:0:0:1: Attached scsi generic sg3 type 13 Aug 16 00:32:21 kernel: [ 8.723370] sd 4:0:0:0: [sdb] 1953513472 512-byte logical blocks: (1.00 TB/931 GiB) Aug 16 00:32:21 kernel: [ 8.750477] sd 4:0:0:0: [sdb] Write Protect is off Aug 16 00:32:21 kernel: [ 8.769411] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00 Aug 16 00:32:21 kernel: [ 8.769414] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.822971] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.841978] sdb: sdb1 Aug 16 00:32:21 kernel: [ 8.905580] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.924173] sd 4:0:0:0: [sdb] Attached SCSI disk Aug 16 00:32:21 kernel: [ 11.600492] XFS mounting filesystem sdb1 Aug 16 00:32:21 kernel: [ 12.222948] Ending clean XFS mount for filesystem: sdb1 After a while the following appears in a log: Aug 16 09:30:56 kernel: [32359.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:31:59 kernel: [32422.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:33:00 kernel: [32483.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 And then it is followed by few kernel dumps, which I think, are not good: Aug 16 09:33:40 kernel: [32520.428027] INFO: task xfssyncd:1002 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32520.462689] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32520.497422] xfssyncd D c3d84a60 0 1002 2 0x00000000 Aug 16 09:33:40 kernel: [32520.532117] f6c9aa80 00000046 c1132742 c3d84a60 00000286 c1418100 c1418100 00000000 Aug 16 09:33:40 kernel: [32520.566867] f6c9ac3c c2808100 00000000 f653b18b 00001d76 00000001 f6c9aa80 c3c3f0e0 Aug 16 09:33:40 kernel: [32520.601343] 08e59242 f6c9ac3c 2e41392b 00000000 08e59242 00000000 c3f7fb48 0067385a Aug 16 09:33:40 kernel: [32520.635533] Call Trace: Aug 16 09:33:40 kernel: [32520.668991] [<c1132742>] ? cfq_set_request+0x0/0x290 Aug 16 09:33:40 kernel: [32520.702804] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32520.736555] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32520.770360] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32520.804110] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32520.837713] [<c1128230>] ? blk_peek_request+0x135/0x143 Aug 16 09:33:40 kernel: [32520.871265] [<f8582987>] ? scsi_dispatch_cmd+0x185/0x1e5 [scsi_mod] Aug 16 09:33:40 kernel: [32520.904407] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32520.937007] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32520.969033] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.000485] [<c10cffd1>] ? bio_add_page+0x28/0x2e Aug 16 09:33:40 kernel: [32521.031403] [<f8918d38>] ? _xfs_buf_ioapply+0x206/0x22b [xfs] Aug 16 09:33:40 kernel: [32521.061888] [<f89197bd>] ? xfs_buf_iorequest+0x38/0x60 [xfs] Aug 16 09:33:40 kernel: [32521.091845] [<f8907230>] ? xlog_bdstrat_cb+0x16/0x3d [xfs] Aug 16 09:33:40 kernel: [32521.121222] [<f8905781>] ? XFS_bwrite+0x32/0x64 [xfs] Aug 16 09:33:40 kernel: [32521.150007] [<f89059be>] ? xlog_sync+0x20b/0x311 [xfs] Aug 16 09:33:40 kernel: [32521.178214] [<f89112fc>] ? xfs_trans_ail_tail+0x12/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.205914] [<f8906261>] ? xlog_state_sync_all+0xa2/0x141 [xfs] Aug 16 09:33:40 kernel: [32521.233074] [<f8906611>] ? _xfs_log_force+0x51/0x68 [xfs] Aug 16 09:33:40 kernel: [32521.259664] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32521.285662] [<f8906636>] ? xfs_log_force+0xe/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.311171] [<f89202df>] ? xfs_sync_worker+0x17/0x5c [xfs] Aug 16 09:33:40 kernel: [32521.336117] [<f891fbb7>] ? xfssyncd+0x134/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.360498] [<f891fa83>] ? xfssyncd+0x0/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.384211] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32521.407890] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32521.430876] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32521.453394] INFO: task flush-8:16:12945 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32521.476116] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32521.498579] flush-8:16 D 00000000 0 12945 2 0x00000000 Aug 16 09:33:40 kernel: [32521.520649] f4e4d540 00000046 e412e940 00000000 00000002 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32521.542426] f4e4d6fc c2808100 00000000 00000000 000008b4 00000001 f4e4d540 c3c3f0e0 Aug 16 09:33:40 kernel: [32521.563745] 02e905a8 f4e4d6fc 007a5399 00000000 02e905a8 00000000 f4e2db48 00670b98 Aug 16 09:33:40 kernel: [32521.585077] Call Trace: Aug 16 09:33:40 kernel: [32521.605790] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32521.626184] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32521.646133] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32521.665659] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32521.684716] [<f891796e>] ? xfs_convert_page+0x30a/0x331 [xfs] Aug 16 09:33:40 kernel: [32521.703366] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32521.721644] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32521.739465] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.756896] [<c10cfa45>] ? bio_alloc_bioset+0x7b/0xba Aug 16 09:33:40 kernel: [32521.774046] [<f8917af0>] ? xfs_submit_ioend_bio+0x3b/0x44 [xfs] Aug 16 09:33:40 kernel: [32521.790694] [<f8917ba3>] ? xfs_submit_ioend+0xaa/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.806736] [<f891817d>] ? xfs_page_state_convert+0x5c0/0x61c [xfs] Aug 16 09:33:40 kernel: [32521.822859] [<c113705b>] ? __lookup_tag+0x8e/0xee Aug 16 09:33:40 kernel: [32521.838958] [<f891840d>] ? xfs_vm_writepage+0x91/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.855039] [<c108bbcc>] ? __writepage+0x8/0x22 Aug 16 09:33:40 kernel: [32521.871067] [<c108c17b>] ? write_cache_pages+0x1af/0x29f Aug 16 09:33:40 kernel: [32521.886616] [<c108bbc4>] ? __writepage+0x0/0x22 Aug 16 09:33:40 kernel: [32521.901593] [<c108c285>] ? generic_writepages+0x1a/0x21 Aug 16 09:33:40 kernel: [32521.916455] [<f8918338>] ? xfs_vm_writepages+0x0/0x38 [xfs] Aug 16 09:33:40 kernel: [32521.931484] [<c108c2a5>] ? do_writepages+0x19/0x25 Aug 16 09:33:40 kernel: [32521.946648] [<c10c80d9>] ? writeback_single_inode+0xc7/0x273 Aug 16 09:33:40 kernel: [32521.961675] [<c10c8c44>] ? writeback_inodes_wb+0x3dd/0x49c Aug 16 09:33:40 kernel: [32521.976831] [<c10c8e18>] ? wb_writeback+0x115/0x178 Aug 16 09:33:40 kernel: [32521.991778] [<c10c901f>] ? wb_do_writeback+0x121/0x131 Aug 16 09:33:40 kernel: [32522.006538] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32522.021091] [<c10c9050>] ? bdi_writeback_task+0x21/0x89 Aug 16 09:33:40 kernel: [32522.035493] [<c10979e5>] ? bdi_start_fn+0x59/0xa4 Aug 16 09:33:40 kernel: [32522.049765] [<c109798c>] ? bdi_start_fn+0x0/0xa4 Aug 16 09:33:40 kernel: [32522.063792] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32522.077612] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32522.091260] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32522.104966] INFO: task smartctl:13098 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32522.118883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32522.133012] smartctl D 00000020 0 13098 13097 0x00000000 Aug 16 09:33:40 kernel: [32522.147221] e50b9540 00000086 c11d28a8 00000020 00000770 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32522.161720] e50b96fc c2808100 00000000 e53e8800 00000000 00000020 c3cec000 c13886c0 Aug 16 09:33:40 kernel: [32522.176217] f99dab68 e50b96fc 007a4f1e 00000001 c4082f24 c4082ed8 00000001 c3c3f0e0 Aug 16 09:33:40 kernel: [32522.190737] Call Trace: Aug 16 09:33:40 kernel: [32522.205038] [<c11d28a8>] ? __netdev_alloc_skb+0x14/0x2d Aug 16 09:33:40 kernel: [32522.219605] [<c126b799>] ? schedule_timeout+0x20/0xb0 Aug 16 09:33:40 kernel: [32522.234144] [<c112820d>] ? blk_peek_request+0x112/0x143 Aug 16 09:33:40 kernel: [32522.248649] [<f85873b6>] ? scsi_request_fn+0x3c1/0x47a [scsi_mod] Aug 16 09:33:40 kernel: [32522.263233] [<c103aba8>] ? del_timer+0x55/0x5c Aug 16 09:33:40 kernel: [32522.277773] [<c126b6a2>] ? wait_for_common+0xa4/0x100 Aug 16 09:33:40 kernel: [32522.292342] [<c102cd8d>] ? default_wake_function+0x0/0x8 Aug 16 09:33:40 kernel: [32522.306958] [<c112b3d1>] ? blk_execute_rq+0x8b/0xb2 Aug 16 09:33:40 kernel: [32522.321569] [<c112b2ac>] ? blk_end_sync_rq+0x0/0x23 Aug 16 09:33:40 kernel: [32522.336070] [<c112b58b>] ? blk_recount_segments+0x13/0x20 Aug 16 09:33:40 kernel: [32522.350583] [<c1127307>] ? blk_rq_bio_prep+0x44/0x74 Aug 16 09:33:40 kernel: [32522.365059] [<c112b0b2>] ? blk_rq_map_kern+0xc5/0xee Aug 16 09:33:40 kernel: [32522.379439] [<c112e2a5>] ? sg_scsi_ioctl+0x221/0x2aa Aug 16 09:33:40 kernel: [32522.393801] [<c112e672>] ? scsi_cmd_ioctl+0x344/0x39a Aug 16 09:33:40 kernel: [32522.408140] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.422566] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.436832] [<f87676aa>] ? sd_ioctl+0x90/0xb5 [sd_mod] Aug 16 09:33:40 kernel: [32522.451228] [<c112c35f>] ? __blkdev_driver_ioctl+0x53/0x63 Aug 16 09:33:40 kernel: [32522.465689] [<c112cbbf>] ? blkdev_ioctl+0x850/0x891 Aug 16 09:33:40 kernel: [32522.479982] [<c1020474>] ? __wake_up_common+0x34/0x59 Aug 16 09:33:40 kernel: [32522.494138] [<c10244cd>] ? complete+0x28/0x36 Aug 16 09:33:40 kernel: [32522.507986] [<c1086c64>] ? find_get_page+0x1f/0x81 Aug 16 09:33:40 kernel: [32522.521671] [<c10abed5>] ? add_partial+0xe/0x40 Aug 16 09:33:40 kernel: [32522.535285] [<c1086e68>] ? lock_page+0x8/0x1d Aug 16 09:33:40 kernel: [32522.548797] [<c1087432>] ? filemap_fault+0xb5/0x2e6 Aug 16 09:33:40 kernel: [32522.562141] [<c109941c>] ? __do_fault+0x381/0x3b1 Aug 16 09:33:40 kernel: [32522.575441] [<c10d0c30>] ? block_ioctl+0x27/0x2c Aug 16 09:33:40 kernel: [32522.588708] [<c10d0c09>] ? block_ioctl+0x0/0x2c Aug 16 09:33:40 kernel: [32522.601858] [<c10bcd78>] ? vfs_ioctl+0x1c/0x5f Aug 16 09:33:40 kernel: [32522.614917] [<c10bd30c>] ? do_vfs_ioctl+0x4aa/0x4e5 Aug 16 09:33:40 kernel: [32522.627961] [<c10350db>] ? __do_softirq+0x115/0x151 Aug 16 09:33:40 kernel: [32522.640901] [<c126e270>] ? do_page_fault+0x2f1/0x307 Aug 16 09:33:40 kernel: [32522.653803] [<c10bd388>] ? sys_ioctl+0x41/0x58 Aug 16 09:33:40 kernel: [32522.666674] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Then again few messages reset high speed USB device using ehci_hcd and address 2. I have browsed and read similar error reports here and there and I tried: I have upgraded the kernel from v2.6.26-2 to 2.6.32-5, which has not solved the problem. They say, this might a cable problem. I have tried to replace the USB-to-miniUSB cable (that connects external drive with computer) with another one. No changes. Somebody suggests to try another USB port. I have only 4 external USB ports, tried another one with no success. They say to try uhci_hcd. I have unmounted the device, unloaded ehci_hcd and mounted again. The difference was that now in log I get reset full speed USB device using uhci_hcd and address 2 and similar kernel dumps after a while. They say to echo 128 > /sys/block/sdb/device/max_sectors. I tried it with ehci_hcd with no success (note: I have issued this command after the drive was mounted but before using it actively). I have lauched smartmond and checking periodically the output of smartctl: drive temperature is OK, number of bad sectors and uncorrectable errors is 0. Nothing suspicious is reported by S.M.A.R.T. except maybe the following: Aug 16 12:40:12 kernel: [43715.314566] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Aug 16 12:40:13 kernel: [43715.705622] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Of course, I have not tried all combinations of above. But unfortunately, I am run out of cardinal ideas. If anybody can advice something specific about the problem, you are very welcome.

    Read the article

  • `svn checkout` on the SVN server causes the repo to break with a 301 error

    - by Phillip Oldham
    We have an nginx server which proxies to a standard set-up of Apache+SVN. The nginx set-up is a very simple proxy: server { server_name svn.ourdomain.tld; location / { proxy_pass http://localhost:8080; } } Apache is set-up as follows: <Location /> DAV svn SVNParentPath /var/svn AuthType Basic AuthName "Authentication Required" AuthUserFile /var/svn/.auth Require valid-user </Location> ...which allows us to access repositories using something like http://svn.ourdomain.tld/repo. We've been running this set-up now for about 2 years without issue. Recently we've found that we need to check out one of the repositories onto the server itself, however whenever we do so it seems to break the repo. From that point on, it will only respond with a 301 Moved Permanently error. We've tried: svn co file:///path/to/repo svn co svn://localhost/repo svn co svn://svn.ourdomain.tld/repo svn co svn+ssh://localhost/repo svn co svn+ssh://svn.ourdomain.tld/repo svn co http://localhost/repo svn co http://svn.ourdomain.tld/repo Also tried bypassing nginx, and get the same error: svn co http://localhost:8080/repo svn co http://svn.ourdomain.tld:8080/repo Checking out from a different machine works as expected until we attempt to check out on the server, after that it refuses with the same 301 error. What is more confusing is that this repository server also hosts our HudsonCI server, which can pulls and builds our projects hourly. This leads us to suspect that it's the svn client which is causing an error in communication. Its also very confusing that removing then re-creating the repo using svnadmin doesn't reset the error - the repo is still unavailable even though it's "new"! Restarting apache and subversion (svnserve) has no effect on this, or the original error. Version information: OS: 64-bit CentOS 4.2, 2.6.27 kernel svn client: 1.4.2 (same for both server and remote clients) svn server: 1.4.2 httpd: 2.2.3 UPDATE: This also happens with svn export when run on the repo server. Ran from any other box/client, there isn't a problem. Here's the workflow, to help clarify the error: [~repo-server~]# svnadmin create {repo}; chown -Rf www:www {repo} [remote-client]# svn checkout http://svn.ourdomain.tld/repo [remote-client]# svn add file; svn ci -m '' [~repo-server~]# cd /var/www; svn export file:///path/to/repo/trunk ourproject [remote-client]# svn update fails with 301 error I can also confirm that the hostname of the box doesn't have an effect here, which is very odd: whether or not svn.ourdomain.tld is added to /etc/hosts it still breaks - we thought it could be an issue with localhost routing, but that doesn't seem to be the case. Are we missing something in the documentation which states you can't checkout a repo when the server is on the same box? How can we stop the repos becoming corrupt when we checkout locally?

    Read the article

  • Php pdo_dblib - cannot find/unable to load freetds

    - by MaxPowers
    Self-hosted box, RHEL 6 PHP 5.3.3 PDO installed freetds installed pdo_dblib - so far no luck installing My goal is to use PDO with sybase. Attempting to install pdo_dblib from the appropriate version php source code. I have tried a variety of methods and searched quite a bit for help on this topic, but have yet to be successful. Method 1 Install freetds $ ./configure $ make $ su root Password: $ make install This is successful Install pdo_dblib inside the /ext/pdo_dblib folder: $ phpize $ ./configure $ make $ make test Error output: PHP Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 Warning: PHP Startup: Unable to load dynamic library '/home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so' - /home/sybase/Install_items/php_533_src/php-5.3.3/ext/pdo_dblib/modules/pdo_dblib.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 That doesn't look good...I researched this and found an interesting hack for this here. But changing pdo.ini to pdo_0.ini was not the solution, as I still got the same errors on make test. $ su $ make install Output: Installing shared extensions: /usr/lib64/php/modules/ That seems strange...and no, it doesn't actually install (not showing up on phpinfo after apache restart). Method 2 Install freetds following the instructions exactly, i add the prefix $ ./configure --prefix=/usr/local/freetds $ make $ su root Password: $ make install This is successful Install pdo_dblib inside the /ext/pdo_dblib folder: $ phpize $ ./configure --with-sybase=/usr/local/freetds This produces the following error at the bottom of the output ... checking for PDO_DBLIB support via FreeTDS... yes, shared configure: error: Cannot find FreeTDS in known installation directories Method 3 freetds ./configure variation (including or not include the --prefix...) did not change the result of this so I'll skip it. Install pdo_dblib pecl extension following the method specified here. pecl download pdo_dblib tar -xzvf PDO_DBLIB-1.0.tgz Removed the line, <dep type=”ext” rel=”ge” version=”1.0?>pdo</dep> Saved the package.xml file, and moved it in to the PDO_DBLIB directory. mv package.xml ./PDO_DBLIB-1.0 Navigated to the PDO_DBLIB directory, then installed the package from the directory. cd ./PDO_DBLIB-1.0 pecl install package.xml But, this command gives me the following error output, same as Method 2. checking for PDO_DBLIB support via FreeTDS... yes, shared configure: error: Cannot find FreeTDS in known installation directories ERROR: `/home/sybase/Install_items/pecl_pdo_dblib/PDO_DBLIB-1.0/configure' failed

    Read the article

  • Vista install works on one computer, but bluescreens another (on which Vista is known to work)

    - by Ken
    I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

    Read the article

  • networking with ssh thru wireless

    - by nkvnkv
    I am using Ubuntu 12.04 64bit on my desktop and my laptop. Have install openssh client and server on both of them. My desktop is connected to ADSL2+ Router TD-8840 with wired connection and has 192.168.1.1 IP address. My laptop is connected to 150Mbps Wireless N Router TL-WR741ND with wireless connection and has 192.168.0.1 IP address. ADSL2+ Router TD-8840 and 150Mbps Wireless N Router TL-WR741ND are connected with a wired cable by useing blue port for on wlan on TL-WR741ND. ifconfig from desktop desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:92:37:1f:3d inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:92ff:fe37:1f3d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57508 errors:0 dropped:0 overruns:0 frame:0 TX packets:44508 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:51547633 (51.5 MB) TX bytes:6371374 (6.3 MB) Interrupt:43 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 00:23:cd:b1:ff:e4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:22 Base address:0x8400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:109 errors:0 dropped:0 overruns:0 frame:0 TX packets:109 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12044 (12.0 KB) TX bytes:12044 (12.0 KB) ifconfig from laptop laptop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:a0:d1:65:2a:42 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31244 (31.2 KB) TX bytes:31244 (31.2 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:1b:19:81 inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::219:d2ff:fe1b:1981/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1590 errors:0 dropped:0 overruns:0 frame:0 TX packets:1276 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:874763 (874.7 KB) TX bytes:315401 (315.4 KB) I can connect to desktop from laptop via ssh with no problem, internet connection on laptop and desktop is working fine, but when I want to connect to laptop from desktop via ssh in terminal I type ssh [email protected] and get ssh: connect to host 192.168.0.101 port 22: Connection timed out If anyone is able to point out whats wrong?

    Read the article

  • git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

    - by Ben
    I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

    Read the article

  • git post-receive hook throws "command not found" error but seems to run properly and no errors when run manually

    - by Ben
    I have a post-receive hook that runs on a central git repository set up with gitolite to trigger a git pull on a staging server. It seems to work properly, but throws a "command not found" error when it is run. I am trying to track down the source of the error, but have not had any luck. Running the same commands manually does not produce an error. The error changes depending on what was done in the commit that is being pushed to the central repository. For instance, if 'git rm ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Removed: command not found" and if 'git add ' was committed and pushed to the central repo the error message will be "remote: hooks/post-receive: line 16: Merge: command not found". In either case the 'git pull' run on the staging server works correctly despite the error message. Here is the post-receive script: #!/bin/bash # # This script is triggered by a push to the local git repository. It will # ssh into a remote server and perform a git pull. # # The SSH_USER must be able to log into the remote server with a # passphrase-less SSH key *AND* be able to do a git pull without a passphrase. # # The command to actually perform the pull request on the remost server comes # from the ~/.ssh/authorized_keys file on the REMOTE_HOST and is triggered # by the ssh login. SSH_USER="remoteuser" REMOTE_HOST="staging.server.com" `ssh $SSH_USER@$REMOTE_HOST` # This is line 16 echo "Done!" The command that does the git pull on the staging server is in the ssh user's ~/.ssh/authorized_keys file and is: command="cd /var/www/staging_site; git pull",no-port-forwarding,no-X11-forwarding,no-agent-forwarding, ssh-rsa AAAAB3NzaC1yc2EAAAABIwAA... (the rest of the public key) This is the actual output from removing a file from my local repo, committing it locally, and pushing it to the central git repo: ben@tamarack:~/thejibe/testing/web$ git rm ./testing rm 'testing' ben@tamarack:~/thejibe/testing/web$ git commit -a -m "Remove testing file" [master bb96e13] Remove testing file 1 files changed, 0 insertions(+), 5 deletions(-) delete mode 100644 testing ben@tamarack:~/thejibe/testing/web$ git push Counting objects: 3, done. Delta compression using up to 2 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (2/2), 221 bytes, done. Total 2 (delta 1), reused 0 (delta 0) remote: From [email protected]:testing remote: aa72ad9..bb96e13 master -> origin/master remote: hooks/post-receive: line 16: Removed: command not found # The error msg remote: Done! To [email protected]:testing aa72ad9..bb96e13 master -> master ben@tamarack:~/thejibe/testing/web$ As you can see the post-receive script gets to the echo "Done!" line and when I look on the staging server the git pull has been successfully run, but there's still that nagging error message. Any suggestions on where to look for the source of the error message would be greatly appreciated. I'm tempted to redirect stderr to /dev/null but would prefer to know what the problem is.

    Read the article

  • Monitoring slow nginx/unicorn requests

    - by injekt
    I'm currently using Nginx to proxy requests to a Unicorn server running a Sinatra application. The application only has a couple of routes defined, those of which make fairly simple (non costly) queries to a PostgreSQL database, and finally return data in JSON format, these services are being monitored by God. I'm currently experiencing extremely slow response times from this application server. I have another two Unicorn servers being proxied via Nginx, and these are responding perfectly fine, so I think I can rule out any wrong doing from Nginx. Here is my God configuration: # God configuration APP_ROOT = File.expand_path '../', File.dirname(__FILE__) God.watch do |w| w.name = "app_name" w.interval = 30.seconds # default w.start = "cd #{APP_ROOT} && unicorn -c #{APP_ROOT}/config/unicorn.rb -D" # -QUIT = graceful shutdown, waits for workers to finish their current request before finishing w.stop = "kill -QUIT `cat #{APP_ROOT}/tmp/unicorn.pid`" w.restart = "kill -USR2 `cat #{APP_ROOT}/tmp/unicorn.pid`" w.start_grace = 10.seconds w.restart_grace = 10.seconds w.pid_file = "#{APP_ROOT}/tmp/unicorn.pid" # User under which to run the process w.uid = 'web' w.gid = 'web' # Cleanup the pid file (this is needed for processes running as a daemon) w.behavior(:clean_pid_file) # Conditions under which to start the process w.start_if do |start| start.condition(:process_running) do |c| c.interval = 5.seconds c.running = false end end # Conditions under which to restart the process w.restart_if do |restart| restart.condition(:memory_usage) do |c| c.above = 150.megabytes c.times = [3, 5] # 3 out of 5 intervals end restart.condition(:cpu_usage) do |c| c.above = 50.percent c.times = 5 end end w.lifecycle do |on| on.condition(:flapping) do |c| c.to_state = [:start, :restart] c.times = 5 c.within = 5.minute c.transition = :unmonitored c.retry_in = 10.minutes c.retry_times = 5 c.retry_within = 2.hours end end end Here is my Unicorn configuration: # Unicorn configuration file APP_ROOT = File.expand_path '../', File.dirname(__FILE__) worker_processes 8 preload_app true pid "#{APP_ROOT}/tmp/unicorn.pid" listen 8001 stderr_path "#{APP_ROOT}/log/unicorn.stderr.log" stdout_path "#{APP_ROOT}/log/unicorn.stdout.log" before_fork do |server, worker| old_pid = "#{APP_ROOT}/tmp/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # someone else did our job for us end end end I have checked God status logs but it appears CPU and Memory Usage are never out of bounds. I also have something to kill high memory workers, which can be found on the GitHub blog page here. When running a tail -f on the Unicorn logs I see some requests, but they're far and few between, when I was at around 60-100 a second before this trouble seemed to have arrived. This log also shows workers being reaped and started as expected. So my question is, how would I go about debugging this? What are the next steps I should be taking? I'm extremely baffled that the server will sometimes respond quickly, but at others time it's very slow, for long periods of time (which may or may not be peak traffic times). Any advice is much appreciated.

    Read the article

  • Moving windows-2003 hdd into virtual machine - with HDD shrink

    - by jm666
    Before you vote to close as exact duplicate, please read the full question. I was already read: Can I make a virtual machine out of a Windows XP physical machine? Disk2vhd,convert my PC to Hyper-V Virtual Machine Creating a Windows Virtual PC image from a Physical machine physical machine to virtual machine and place into VirtualBox BSOD trying to migrate Windows XP from a physical to a virtual machine http://en.wikipedia.org/wiki/Physical-to-Virtual and all other similiar questions here and several external sites too Unfortunately, don't find answer for my problem. I have an physical machine with 500GB HDD, on what is installed old Windows-2003 server with one server application. The application is like the windows itself, too old, no support for it today, haven't installation media and so on.. ;( On the HDD it is used only approx. 100MB (maybe less when will delete all unnecessary files). Want convert the the machine into the VirtualBox, and the VirtualBox should run on the same machine. Is possible to do this with the next steps? I can attach another HDD (via USB or internally) Boot an live Linux from CD, mount HDDs Run "something" on the Linux (the above wikipedia article have many pointer for the SW) for the conversion and store the image on the USB HDD - unfortunately, many of tools uses some specialty what exists in Windows-XP and above. No informations about Windows-2003 server, so what is an working solution for Windows-2003? try boot the virtual image with VirtualBox when it will run ok, remove the old installation, install Linux on the old 500GB hdd, copy the image and run.. The above should works (i hope), but the problems: i currently have only 320GB external USB hdd. (ofc, i can remove it from a box and enter it as internal HDD too) so, for the conversion I looking for the on the fly HDD shrink, so while moving the physical 500GB HDD need shrink it into smaller HDD - as i told above, only 100MB is used Exists something for this? (free) - or the only way is buying and larger 1TB hdd and using it for the conversion? Another question are: is anybody have real experience with windows-2003 conversion into VirtualBox? Looking for an answer from someone who really doing it and can figure out real pitfalls. (googling can do myself). exists here better approach for the solution?

    Read the article

  • DKIM error: dkim=neutral (bad version) header.i=

    - by GBC
    Ive been struggling the last couple of hours with setting up DKIM on my Postfix/CentOS 5.3 server. It finally sends and signs the emails, but apparently Google still does not like it. The errors I'm getting are: dkim=neutral (bad version) [email protected] from googles "show original" interface. This is what my DKIM-signature header look like: v=1; a=rsa-sha1; c=simple/simple; d=mydomain.com.au; s=default; t=1267326852; bh=0wHpkjkf7ZEiP2VZXAse+46PC1c=; h=Date:From:Message-Id:To:Subject; b=IFBaqfXmFjEojWXI/WQk4OzqglNjBWYk3jlFC8sHLLRAcADj6ScX3bzd+No7zos6i KppG9ifwYmvrudgEF+n1VviBnel7vcVT6dg5cxOTu7y31kUApR59dRU5nPR/to0E9l dXMaBoYPG8edyiM+soXo7rYNtlzk+0wd5glgFP1I= Very appreciative of any suggestions as to how I can solve this problem! Btw, here is exactly how I installed dkim-milter in CentOS 5.3 for postfix, if anyone is interested (based on this guide): mkdir dkim-milter cd dkim-milter wget http://www.topdog-software.com/oss/dkim-milter/dkim-milter-2.8.3-1.x86_64.rpm ======S====== Newest version: http://www.topdog-software.com/oss/dkim-milter/ ======E====== rpm -Uvh dkim-milter-2.8.3-1.x86_64.rpm /usr/bin/dkim-genkey -r -d mydomain.com.au ======S====== add contents of default.txt to DNS as TXT _ssp._domainkey TXT dkim=unknown _adsp._domainkey TXT dkim=unknown default._domainkey TXT v=DKIM1; g=*; k=rsa; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GWETBNiQKBgQC5KT1eN2lqCRQGDX+20I4liM2mktrtjWkV6mW9WX7q46cZAYgNrus53vgfl2z1Y/95mBv6Bx9WOS56OAVBQw62+ksXPT5cRUAUN9GkENPdOoPdpvrU1KdAMW5c3zmGOvEOa4jAlB4/wYTV5RkLq/1XLxXfTKNy58v+CKETLQS/eQIDAQAB ======E====== mv default.private default mkdir /etc/mail/dkim/keys/mydomain.com.au mv default /etc/mail/dkim/keys/mydomain.com.au chmod 600 /etc/mail/dkim/keys/mydomain.com.au/default chown dkim-milt.dkim-milt /etc/mail/dkim/keys/mydomain.com.au/default vim /etc/dkim-filter.conf ======S====== ADSPDiscard yes ADSPNoSuchDomain yes AllowSHA1Only no AlwaysAddARHeader no AutoRestart yes AutoRestartRate 10/1h BaseDirectory /var/run/dkim-milter Canonicalization simple/simple Domain mydomain.com.au #add all your domains here and seperate them with comma ExternalIgnoreList /etc/mail/dkim/trusted-hosts InternalHosts /etc/mail/dkim/trusted-hosts KeyList /etc/mail/dkim/keylist LocalADSP /etc/mail/dkim/local-adsp-rules Mode sv MTA MSA On-Default reject On-BadSignature reject On-DNSError tempfail On-InternalError accept On-NoSignature accept On-Security discard PidFile /var/run/dkim-milter/dkim-milter.pid QueryCache yes RemoveOldSignatures yes Selector default SignatureAlgorithm rsa-sha1 Socket inet:20209@localhost Syslog yes SyslogSuccess yes TemporaryDirectory /var/tmp UMask 022 UserID dkim-milt:dkim-milt X-Header yes ======E====== vim /etc/mail/dkim/keylist ======S====== *@mydomain.com.au:mydomain.com.au:/etc/mail/dkim/keys/mydomain.com.au/default ======E====== vim /etc/postfix/main.cf ======S====== Add: smtpd_milters = inet:localhost:20209 non_smtpd_milters = inet:localhost:20209 milter_protocol = 2 milter_default_action = accept ======E====== vim /etc/mail/dkim/trusted-hosts ======S====== localhost 127.0.0.1 ======E====== /etc/mail/local-host-names ======S====== localhost 127.0.0.1 ======E====== /sbin/chkconfig dkim-milter on /etc/init.d/dkim-milter start /etc/init.d/postfix restart

    Read the article

< Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >