Search Results

Search found 14680 results on 588 pages for 'mobile world congress'.

Page 387/588 | < Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >

• Routing traffic to another internal network

  - by Jason

  OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

  Read the article

• Redircting to a url that has a question mark in it?

  - by dkmojo

  I have a somewhat strange problem. A client has moved their site to Wordpress. They use a service for link exchanges that has a Wordpress plugin. The issue is that the new links pages use a query string to display the correct content and I cannot figure out how to redirect the old URLs correctly. Old URLs look like this: domain.com/link/category-name.html The plugin makes them look like this in WP: domain.com/links/?page=category-name.html How in the world can I get the redirect to work properly? Here's what I have tried: Redirect 301 /link/actors.html http://www.artisticimages.biz/links/?page=actors.html Redirect 301 /link/actors.html http://www.artisticimages.biz/links/%3Fpage=actors.html Redirect 301 /link/actors.html http://www.artisticimages.biz/links/\?page=actors.html But none of those have worked. Any help is greatly appreciated!

  Read the article

• afp/smb transfers caps at 2 megabytes/sec, wireless N

  - by CQM

  I wanted to transfer files between two mac computers. The network is wireless-N and both computers have wireless-N modules in them. The problem is that when I transfer files between them, via file sharing (afp) the network speed caps at 2 megabytes/sec. Just downloading files from the internet I can get faster speeds, so this isn't a constriction of my wifi bandwidth, it appears to be a constriction of the protocol being used. My wifi-n is set to 130mbits, so I should see real world transfer speeds around 12-16 megabytes/sec I did this command on both computers sudo sysctl -w net.inet.tcp.delayed_ack=0 which is supposed to lower tcp overhead, but this did not affect it. How can I get the speed I am expecting?

  Read the article

• Samsung 830 very slow benchmark numbers

  - by alekop

  I just bought a new SSD, and installed a fresh copy of Windows on it. I didn't see any noticeable difference in boot times, app start-up times, so I decided to benchmark it. Asus P7P55D-E Intel i5-760 Samsung 830 256GB SATA III Windows 7 Ultimate 64-bit The Windows experience index gave the drive a 7.3 rating, but real-world performance is not particularly impressive. Any ideas why the numbers are so low? UPDATE: It turns out that SATA III support is turned off by default on the P7P55D motherboard. After enabling it in BIOS (Tools - Level Up), the scores went up: Read Write Seq 325 183 4K 16 49 IOPS 32K 28K It's an improvement, but still far below what they should be for this drive.

  Read the article

• Apache VirtualHost running very slow on OS X 10.7 (Lion)

  - by jwerre

  I've set up a few virtual hosts in Lion and it's running very slowly. NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost DocumentRoot "/Library/WebServer/Documents" </VirtualHost> <VirtualHost *:80> ServerName dev.local DocumentRoot "/Users/me/mysite" <Directory /Users/me/mysite> Order allow,deny Allow from all </Directory> </VirtualHost> then in /etc/hosts I added 127.0.0.1 dev.local Everything works fine but it's sooooo slow — 5 or so second to reload a simple "Hello World" html page. Here's is the strange part. If I make a symbolic link of the site in my ~/Sites folder (ln -s ~/mysite ~/Sites/mysite) and navigate to http://localhost/~me/mysite It's nice and fast the way it should be.

  Read the article

• SQL 2008 Mirroring, how to failover from the mirror database?

  - by Luis

  I have configured a database mirroring setup in SQL 2008 using the High-safety, Synchronous mode, without automatic failover. I don't have a Witness instance. Regarding high availability, I understand Mirroring is a better strategy than Log Shipping (faster and smoother failover), and cheaper than Clustering (because of license and hardware costs). According to the MS docs, to do the failover you need to access to the Principal database and in the "Mirror" options click the "Failover" button. But I want to do this from the Mirror database, because what would be the benefit as all this setup is being done in case the Principal server knocks down? Evidently I am missing something. If Mirroring is not a solution for server downtime (as would be Clustering, if I understand correctly), then which practical (i.e. real world examples) cases would benefit from Mirroring for high-availability purposes? Thank you very much for your response! I really need some enlightment.

  Read the article

• mod_fcgid process doesn't respawn

  - by aaronsw

  I have a Python script running on my server as a FastCGI using Apache2 and mod_fcgid. I let it spawn up to five processes. But I soon get messages like these in the Apache logs: [Wed Sep 02 23:16:34 2009] [warn] (103)Software caused connection abort: mod_fcgid: ap_pass_brigade failed in handle_request function [Wed Sep 02 23:16:35 2009] [warn] (103)Software caused connection abort: mod_fcgid: ap_pass_brigade failed in handle_request function and then Apache doesn't seem to recognize that all its processes are dead (I have a max of 5 backends) and refuses to spawn new ones: [Wed Sep 02 23:26:16 2009] [notice] mod_fcgid: /var/www/hacks.og.theinfo.org/picker.fcgi total process count 5 >= 5, skip the spawn request [Wed Sep 02 23:26:17 2009] [notice] mod_fcgid: /var/www/hacks.og.theinfo.org/picker.fcgi total process count 5 >= 5, skip the spawn request at which point it refuses to respond to requests from the outside world. This doesn't seem to happen with my other FastCGIs, which all use the same Apache config: <IfModule mod_fcgid.c> AddHandler fcgid-script .fcgi IPCConnectTimeout 20 MaxProcessCount 5 DefaultMaxClassProcessCount 2 DefaultMinClassProcessCount 1 </IfModule> Any idea what causes it?

  Read the article

• Are there website monitoring services that can monitor HTTP file download times?

  - by Mark

  The software company I work for would like to monitor how long it takes to download their installers (hosted in several locations and about 30-100mb each) from various countries around the world. I am aware of website monitoring services like Pingdom and Site24x7, and have contacted their customer services, but neither have the facility to monitor download times of such large files via HTTP. For various reasons, we are not able to rely on weblogs. Does anyone know of any third-party services that could help us? Many thanks.

  Read the article

• Performance difference between compiled and binary linux distributions/packages

  - by jozko

  I was searching a lot on the internet and couldn't find an exact answer. There are distros like Gentoo (or FreeBSD) which does not come with binaries but only with source code for packages (ports). The majority of distros uses binary backages (debian, etc.). First question: How much speed increase can I expect from compiled package? How much speed increase can I get from real world packages like apache or mysql? i.e. queries per second? Second question: Does binary package means it does not use any CPU instructions that was introduced after first AMD 64bit CPU? With the 32bit packages does it mean that the package will run on 386 and basically does not use most of the modern CPU instructions? Additional info: - I am not talking about desktop, but server environment. - I dont care about compile time - I have more servers, so speed increase more than 15% is worth for using source code packages - Please no flamewars. Thank you very much

  Read the article

• Linux: Schedule command to run once after reboot (RunOnce equivalent)

  - by Christopher Parker

  I'd like to schedule a command to run after reboot on a Linux box. I know how to do this so the command consistently runs after every reboot with a @reboot crontab entry, however I only want the command to run once. After it runs, it should be removed from the queue of commands to run. I'm essentially looking for a Linux equivalent to RunOnce in the Windows world. In case it matters: $ uname -a Linux devbox 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 x86_64 x86_64 x86_64 GNU/Linux $ bash --version GNU bash, version 3.2.48(1)-release (x86_64-suse-linux-gnu) Copyright (C) 2007 Free Software Foundation, Inc. $ cat /etc/SuSE-release SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 0 Is there an easy, scriptable way to do this?

  Read the article

• Is Centos legal?

  - by Jim B

  I'm trying to figure out if centos is legal (or simply grey). Here's what makes me wonder: They seem to go to great pains not to mention that they are based on redhat in the FAQ they mention a policy about using the redhat trademark, but the link no longer exists. When installing it it's not hard to find a lot of redhat code. I don't bother much with the linux world anymore but I had a client that was wondering about it as his auditors picked up on it and wanted to know where his license was.

  Read the article

• Can the NVIDIA ION chipset handle streaming and gaming reasonable well?

  - by true_gritt

  I'm considering getting a small-footprint "nettop" computer to use as a home theater PC with my Samsung LN40A550 HDTV. I've been looking at systems like the AS Rock ION HT330, the Acer AspireRevo 3610, or the Asus EeeBox PC EB1501. These are all systems with NVIDIA ION chipset (Intel Atom N330 dual core CPU + NVIDIA GeForce 9400 GPU). Is the NVIDIA ION chipset powerful enough to support media streaming at HD resolutions (e.g. via Boxee, Hulu, Netflix) and casual gaming (e.g. World of Warcraft, Madden NFL) reasonably well without herky-jerky video output?

  Read the article

• How have you saved green by going green?

  - by Bob

  For the purpose of this question, I am interested in server/datacenter related hardware. Have you had any measureable amount of ROI by swapping existing hardware to more "green" or energy efficient hardware? For example, VMWare says you can reduce energy consumption by up to 80% by using virtualization. I have also heard of a cooling solution from HP which is suppose to reduce a small amount of engery usage (<25% I think). Google has also done something by integrating a UPS into their power supplies to reduce energy consumption. Any real world experiences would be great, but if you have any details on initial cost, savings and pay off time about what changes were make that would fantastic. I am not only interested in virtualization, I am interested in anything.

  Read the article

• What does the email header "X-CAA-SPAM" refer to?

  - by lotri

  I've got an application that sends out notification emails to users of the application (this is not spam; the information in these emails is solicited and useful, and is also a feature turned off by default and must be enabled by the user). The app is still in beta, and one of our testers reports that the notification emails are going to his junk mail folder in Outlook 2003. This is the only reported case of this, but I asked him to send me the email headers from the message, and I noticed that there is a header there labeled "X-CAA-SPAM" with a value of 00000 . I'm a programmer, so I'm fairly green in the world of successful automated emails - does anyone know if this header is the culprit? If not, any suggestions?

  Read the article

• In Puppet, how would I secure a password variable (in this case a MySQL password)?

  - by Beaming Mel-Bin

  I am using Puppet to provision MySQL with a parameterised class: class mysql::server( $password ) { package { 'mysql-server': ensure => installed } package { 'mysql': ensure => installed } service { 'mysqld': enable => true, ensure => running, require => Package['mysql-server'], } exec { 'set-mysql-password': unless => "mysqladmin -uroot -p$password status", path => ['/bin', '/usr/bin'], command => "mysqladmin -uroot password $password", require => Service['mysqld'], } } How can I protect $password? Currently, I removed the default world readable permission from the node definition file and explicitly gave puppet read permission via ACL. I'm assuming others have come across a similar situation so perhaps there's a better practice.

  Read the article

• When trying to copy a virtual disk in VMware vSphere client, I get an errror.

  - by Zak

  I'm pretty new to all the VMware world, so this is probably mainly a question about the right set of documentation to look at. I'm trying to clone/copy a VM that I installed on an ESXi installation. I was trying to follow along with the top example here: http://serverfault.com/questions/16320/is-there-a-way-to-clone-an-existing-vm-on-an-esxi-server-without-having-to-re-imp However, I'm using the vSphere client to connect to the ESXi box and manage it, and the vSphere client is telling me it won't let me rename the vmdk file. The real answer I want is how do I clone the VM I installed if I want to spin up 5 copies. Is there another utility I can use to copy the vmdk file, then create a new virtual machine using it? Any idea why they nerfed the feature in vSphere client?

  Read the article

• Sending mail via php in EC2

  - by william007

  I have used the following code for sending mail using php using amazon ec2, but I only see 'aatest' as the result, and doesn't get any incoming email. Btw, I have already included ses.php, and have validated the email [email protected], and double confirm that accesskey, and accesskey are the correct one. Can anyone suggest way for debugging it? require_once('ses.php'); $con=new SimpleEmailService('accesskey','accesskey'); print_r('aa'.$con->listVerifiedEmailAddresses()); $m = new SimpleEmailServiceMessage(); $m->addTo('[email protected]'); $m->setFrom('[email protected]'); $m->setSubject('Hello, world!'); $m->setMessageFromString('This is the message body.'); print_r($con->sendEmail($m)); echo 'test';

  Read the article

• what does "Net user administrator /active:yes" do to a computer?

  - by Rees

  i just purchased a new laptop and had some issues with it... I called tech support and they had me run this command in cmd prompt by right clicking the cmd icon and selecting "run as administrator" with root C:\windows\system32: "Net user administrator /active:no" after it was determined that it didn't fix the issue we ran this code "Net user administrator /active:yes" i then rebooted..and was asked for my windows login for my user account "Rees" as usual.. however ALL my settings where gone (including my desktop files) as though it was the first time I booted up. WHAT in the world happened with this command?? I desperately NEED my user accounts and files back to how they were!! (running windows 7) Please help!

  Read the article

• Bandwidth sizing for simultaneous RDP sessions

  - by Gareth Marlow

  We're doing some DR scenario planning which will require up to 150 users to RDP into their desktop machines (mainly running Windows XP) over our VPN. We have a 2mbit uncontended internet connection at the moment but there's scope to upgrade this and also to use a secondary SDSL line to give us more bandwidth. Typical bandwidth figures I've seen suggest to plan for 64kbps per session, which works out to 9.6mbps in total. I'd like to know: Does anyone have any real-world data which would support these estimates? Are there any operational 'gotcha's that we need to be aware of? Thanks!

  Read the article

• Routing traffic to another internal network

  - by Jason

  OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

  Read the article

• How Can I Point My Local Testing Server at My GitHub Repository?

  - by Goober

  Up until a few days ago, I had a particular setup that was as follows. Using SVN, all of the websites that I developed were committed to a source control drop box on a local testing server. Then using IIS, a new website was set up to point at the last revision of each particular website I developed and display it to the outside world using a specific URL. I have just moved over to using git and github, meaning all of my source controlled code is now no longer stored on a local testing server. As a result of this, I am not sure how I can go about doing a similar thing to what I did with the SVN setup, however I need to be able to essentially have that same setup again, just using Git. So basically, how can I go about getting my local testing server to point at the GitHub repository for that site? Help greatly appreciated.

  Read the article

• Database Server Hardware components (order of importance), CPU speed VS CPU cache vs RAM vs DISK

  - by nulltorpedo

  I am new to database world and would like to know what are crucial hardware specs when it comes to database performance. I have searched the internet and found this so far (In order of decreasing importance): 1) Hard Disk: Get an SSD basically (much more IOPS than spinners) 2) Memory: Get as much as you can afford 3) CPU: For the same $ spent, prefer larger cache size over speed. Are these findings sensible? EDIT: I would like to focus on CPU speed VS CPU cache size. EDIT2: The database is used to store some combination of ints and int arrays with few text fields. There are a lot of Select queries looking for existing entries. If entry is not found, then insert it. I would say most of processing would be trying to find a match across a table with 200 columns and 20k rows. The insert statements are very few. EDIT3: Also, we have a lot of views (basically select queries).

  Read the article

• What decent audio recording interfaces are well supported in Windows 7 64bit?

  - by labradort

  I currently have an Audigy 2 ZS Platinum. It permits me to insert a 1/4" jack line from bass guitar and play along with pre-recorded piano music. This worked fine under Windows XP. I am moving to Windows 7 64 bit (dual boot for now), and Creative may not develop fully working drivers for this component. Looking around, I don't see Windows 7 support mentioned at product web sites from E-MU, Roland, M-Audio, etc. Even at Creative, the posting of available drivers for Windows 7 is deceptive, as they do not adequately support recording (latency, distortion). My local music store shrugs and says to stay with Win XP. In some cases, the Vista drivers will work in Win 7. So I need real world feedback on this. I should also mention I'm not impressed with available USB interfaces - they have too low of a signal to noise ratio for my purposes. That leaves PCI, or possibly firewire devices (never tried one yet).

  Read the article

• Command line safety tricks

  - by deadprogrammer

  Command line and scripting is dangerous. Make a little typo with rm -rf and you are in a world of hurt. Confuse prod with stage in the name of the database while running an import script and you are boned (if they are on the same server, which is not good, but happens). Same for noticing too late that the server name where you sshed is not what you thought it was after funning some commands. You have to respect the Hole Hawg. I have a few little rituals before running risky commands - like doing a triple take check of the server I'm on. Here's an interesting article on rm safety. What little rituals, tools and tricks keeps you safe on the command line? And I mean objective things, like "first run ls foo*, look at the output of that and then substitute ls with rm -rf to avoid running rm -rf foo * or something like that", not "make sure you know what the command will do".

  Read the article

• Go frame-by-frame through a movie with a precise timer

  - by Matchu

  Hello, world: I have a video I made for physics class, which I intend to use to measure just how long an event took to take place. I can find the start frame and end frame easily using VLC's frame-by-frame feature. However, VLC's timer seems only to be precise to a single second, giving me no more precise an answer than "5 seconds." Is there a way in VLC, or any other program, to identify at precisely what time a particular frame in a video takes place? I have easy access to Ubuntu and Windows, and acquire a Mac if need be. If precise timer is not available, what number frame I am on will also work, since I know the framerate.

  Read the article

< Previous Page | 383 384 385 386 387 388 389 390 391 392 393 394  | Next Page >