Search Results

Search found 15665 results on 627 pages for 'inno setup'.

Page 389/627 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• Iphone: controlling text with delay problem with UIWebView

  - by James B.

  Hi, I've opted to use UIWebView so I can control the layout of text I've got contained in a local html document in my bundle. I want the text to display within a UIWebView I've got contained within my view. So the text isn't the whole view, just part of it. Everything runs fine, but when the web page loads I get a blank screen for a second before the text appears. This looks really bad. can anyone give me an example of how to stop this happening? I'm assuming I have to somehow hide the web view until it has fully loaded? Could someone one tell me how to do this? At the moment I'm calling my code through the viewDidLoad like this: [myUIWebView loadRequest: [NSURLRequest requestWithURL:[NSURL fileURLWithPath:[[NSBundle mainBundle]pathForResource:@"localwebpage" ofType:@"html"] isDirectory:NO]]]; Any help is much appreciated. I've read round a few forums and not seen a good answer to this question, and it seems like it recurs a lot as an issue for beginners like myself. Thanks for taking the time to read this post! UPDATED info Thanks for your response. The suggestions below solves the problem but creates a new one for me as now when my view loads it is totally hidden until I click on my toggle switch. to understand this it's maybe most helpful if I post all my code. Before this though let me explain the setup of my view. I've got a standard view within which I've also got two web views, one on top of the other. each web view contains different text with different styling. the user flicks between views using a toggle switch, which hides/reveals the web views. I'm using the web views because I want to control the style/layout of the text. Below is my full .m code, I can't figure out where it's going wrong. My web views are called oxford & harvard I'm sure its something to do with how/when I'm hiding/revealing views. I've played around with this but can't seem to get it right. Maybe my approach is wrong. A bit of advice ironing this out would be really appreciated: @implementation ReferenceViewController @synthesize oxford; @synthesize harvard; // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; [oxford loadRequest: [NSURLRequest requestWithURL:[NSURL fileURLWithPath:[[NSBundle mainBundle]pathForResource:@"Oxford" ofType:@"html"] isDirectory:NO]]]; [harvard loadRequest: [NSURLRequest requestWithURL:[NSURL fileURLWithPath:[[NSBundle mainBundle]pathForResource:@"Harvard" ofType:@"html"] isDirectory:NO]]]; [oxford setHidden:YES]; [harvard setHidden:YES]; } - (void)webViewDidFinishLoad:(UIWebView *)webView { if([webView hidden]) { [oxford setHidden:NO]; [harvard setHidden:NO]; } } //Toggle controls for toggle switch in UIView to swap between webviews - (IBAction)toggleControls:(id)sender { if ([sender selectedSegmentIndex] == kSwitchesSegmentIndex) { oxford.hidden = NO; harvard.hidden = YES; } else { oxford.hidden = YES; harvard.hidden = NO; } } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [super dealloc]; [oxford release]; [harvard release]; } @end

  Read the article

• Magento - Data is not inserted into database, but the id is autoincremented

  - by Joseph

  I am working on a new payment module for Magento and have come across an issue that I cannot explain. The following code that runs after the credit card is verified: $table_prefix = Mage::getConfig()->getTablePrefix(); $tableName = $table_prefix.'authorizecim_magento_id_link'; $resource = Mage::getSingleton('core/resource'); $writeconnection = $resource->getConnection('core_write'); $acPI = $this->_an_customerProfileId; $acAI = $this->_an_customerAddressId; $acPPI = $this->_an_customerPaymentProfileId; $sql = "insert into {$tableName} values ('', '$customerId', '$acPI', '$acPI', '3')"; $writeconnection->query($sql); $sql = "insert into {$tableName} (magCID, anCID, anOID, anObjectType) values ('$customerId', '$acPI', '$acAI', '2')"; $writeconnection->query($sql); $sql = "insert into {$tableName} (magCID, anCID, anOID, anObjectType) values ('$customerId', '$acPI', '$acPPI', '1')"; $writeconnection->query($sql); I have verified using Firebug and FirePHP that the SQL queries are syntactically correct and no errors are returned. The odd thing here is that I have checked the database, and the autoincrement value is incremented on every run of the code. However, no rows are inserted in the database. I have verified this by adding a die(); statement directly after the first write. Any ideas why this would be occuring? The relative portion of the config.xml is this: <config> <global> <models> <authorizecim> <class>CPAP_AuthorizeCim_Model</class> </authorizecim> <authorizecim_mysql4> <class>CPAP_AuthorizeCim_Model_Mysql4</class> <entities> <anlink> <table>authorizecim_magento_id_link</table> </anlink> </entities> <entities> <antypes> <table>authorizecim_magento_types</table> </antypes> </entities> </authorizecim_mysql4> </models> <resources> <authorizecim_setup> <setup> <module>CPAP_AuthorizeCim</module> <class>CPAP_AuthorizeCim_Model_Resource_Mysql4_Setup</class> </setup> <connection> <use>core_setup</use> </connection> </authorizecim_setup> <authorizecim_write> <connection> <use>core_write</use> </connection> </authorizecim_write> <authorizecim_read> <connection> <use>core_read</use> </connection> </authorizecim_read> </resources> </global> </config>

  Read the article

• sherlock actionbar menu

  - by user1647443

  I am trying to setup a menu programatically and my method gets com.actionbarsherlock.view.Menu menu as a parameter. As I want to change the styling of the menu item I am trying to setup a SpannableString spannable and pass it to add. menu.add(0, MENU_ABOUT, 0, spannable); This is causing a crash only in ICS when I cick that menu item. Any ideas if I am missing something. Thanks Here is the code I am trying and it crashes when I run the app and select "About Application". FYI, I am using SpannableString because I want to add some styling and color to the menu item. The crash does NOT happen if I use a regular string, but then I cant do styling public boolean onCreateOptionsMenu(com.actionbarsherlock.view.Menu menu) { SpannableString spannable = new SpannableString("About Application"); menu.add(0, MENU_ABOUT, 0, spannable); return true; } Here is the stack trace: 09-05 02:25:32.849: E/AndroidRuntime(684): FATAL EXCEPTION: main 09-05 02:25:32.849: E/AndroidRuntime(684): java.lang.IllegalArgumentException: Invalid payload item type 09-05 02:25:32.849: E/AndroidRuntime(684): at android.util.EventLog.writeEvent(Native Method) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.app.Activity.onMenuItemSelected(Activity.java:2501) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.support.v4.app.FragmentActivity.onMenuItemSelected(FragmentActivity.java:351) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.policy.impl.PhoneWindow.onMenuItemSelected(PhoneWindow.java:950) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.MenuBuilder.dispatchMenuItemSelected(MenuBuilder.java:735) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.MenuItemImpl.invoke(MenuItemImpl.java:149) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.MenuBuilder.performItemAction(MenuBuilder.java:874) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.view.menu.ListMenuPresenter.onItemClick(ListMenuPresenter.java:163) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AdapterView.performItemClick(AdapterView.java:292) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AbsListView.performItemClick(AbsListView.java:1058) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AbsListView$PerformClick.run(AbsListView.java:2514) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.widget.AbsListView.onTouchEvent(AbsListView.java:3180) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.View.dispatchTouchEvent(View.java:5541) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTransformedTouchEvent(ViewGroup.java:1951) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:1712) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTransformedTouchEvent(ViewGroup.java:1957) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:1726) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1860) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.View.dispatchPointerEvent(View.java:5721) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.deliverPointerEvent(ViewRootImpl.java:2890) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.handleMessage(ViewRootImpl.java:2466) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.processInputEvents(ViewRootImpl.java:845) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.view.ViewRootImpl.handleMessage(ViewRootImpl.java:2475) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.os.Handler.dispatchMessage(Handler.java:99) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.os.Looper.loop(Looper.java:137) 09-05 02:25:32.849: E/AndroidRuntime(684): at android.app.ActivityThread.main(ActivityThread.java:4424) 09-05 02:25:32.849: E/AndroidRuntime(684): at java.lang.reflect.Method.invokeNative(Native Method) 09-05 02:25:32.849: E/AndroidRuntime(684): at java.lang.reflect.Method.invoke(Method.java:511) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:784) 09-05 02:25:32.849: E/AndroidRuntime(684): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:551) 09-05 02:25:32.849: E/AndroidRuntime(684): at dalvik.system.NativeStart.main(Native Method) Thanks

  Read the article

• Codeigniter: Controller URI with Library

  - by Kevin Brown

  I have a working controller and library function, but I now need to pass a URI segment to the library for decision making, and I'm stuck. Controller: function survey($method) { $id = $this->session->userdata('id'); $data['member'] = $this->home_model->getUser($id); //Convert the db Object to a row array $data['manager'] = $data['member']->row(); $manager_id = $data['manager']->manager_id; $data['manager'] = $this->home_model->getUser($manager_id); $data['manager'] = $data['manager']->row(); if ($data['manager']->credits == '0') { flashMsg('warning',"You can't complete the assessment until your manager has purchased credit."); redirect('home','location'); } elseif ($data['manager']->test_complete == '3'){ flashMsg('warning',"You already completed the Assessment."); redirect('home','location'); } else{ $data['header'] = "Home"; $this->survey_form_processing->survey_form($this->_container,$data); } } Library: function survey_form($container) { if($method ==1){ $id = $this->CI->session->userdata('id'); // Setup fields for($i=1;$i<18;$i++){ $fields["a_".$i] = 'Question '.$i; } for($i=1;$i<17;$i++){ $fields["b_".$i] = 'Question '.$i; } $fields["company_name"] = "Company Name"; $fields['company_address'] = "company_address"; $fields['company_phone'] = "company_phone"; $fields['company_state'] = "company_state"; $fields['company_city'] = "company_city"; $fields['company_zip'] = "company_zip"; $fields['job_title'] = "job_title"; $fields['job_type'] = "job_type"; $fields['job_time'] = "job_time"; $fields['department'] = "department"; $fields['supervisor'] = "supervisor"; $fields['vision'] = "vision"; $fields['height'] = "height"; $fields['weight'] = "weight"; $fields['hand_dominance'] = "hand_dominance"; $fields['areas_of_fatigue'] = "areas_of_fatigue"; $fields['injury_review'] = "injury_review"; $fields['job_positive'] = "job_positive"; $fields['risk_factors'] = "risk_factors"; $fields['job_improvement_short'] = "job_improvement_short"; $fields['job_improvement_long'] = "job_improvement_long"; $fields["c_1"] = "Near Lift"; $fields["c_2"] = "Middle Lift"; $fields["c_3"] = "Far Lift"; $this->CI->validation->set_fields($fields); // Set Rules for($i=1;$i<18;$i++){ $rules["a_".$i]= 'hour|integer|max_length[2]'; } for($i=1;$i<17;$i++){ $rules["b_".$i]= 'hour|integer|max_length[2]'; } // Setup form default values $this->CI->validation->set_rules($rules); if ( $this->CI->validation->run() === FALSE ) { // Output any errors $this->CI->validation->output_errors(); } else { // Submit form $this->_submit(); } // Modify form, first load $this->CI->db->from('be_user_profiles'); $this->CI->db->where('user_id' , $id); $user = $this->CI->db->get(); $this->CI->db->from('be_survey'); $this->CI->db->where('user_id' , $id); $survey = $this->CI->db->get(); $user = array_merge($user->row_array(),$survey->row_array()); $this->CI->validation->set_default_value($user); // Display page $data['user'] = $user; $data['header'] = 'Risk Assessment Survey'; $data['page'] = $this->CI->config->item('backendpro_template_public') . 'form_survey'; $this->CI->load->view($container,$data); } else{ redirect('home','location'); } } My library function doesn't know what to do with Method...and I'm confused. Does it have something to do with instances in my library?

  Read the article

• Same source, multiple targets with different resources (Visual Studio .Net 2008)

  - by Mike Bell

  A set of software products differ only by their resource strings, binary resources, and by the strings / graphics / product keys used by their Visual Studio Setup projects. What is the best way to create, organize, and maintain them? i.e. All the products essentially consist of the same core functionality customized by graphics, strings, and other resource data to form each product. Imagine you are creating a set of products like "Excel for Bankers", Excel for Gardeners", "Excel for CEOs", etc. Each product has the the same functionality, but differs in name, graphics, help files, included templates etc. The environment in which these are being built is: vanilla Windows.Forms / Visual Studio 2008 / C# / .Net. The ideal solution would be easy to maintain. e.g. If I introduce a new string / new resource projects I haven't added the resource to should fail at compile time, not run time. (And subsequent localization of the products should also be feasible). Hopefully I've missed the blindingly-obvious and easy way of doing all this. What is it? ============ Clarification(s) ================ By "product" I mean the package of software that gets installed by the installer and sold to the end user. Currently I have one solution, consisting of multiple projects, (including a Setup project), which builds a set of assemblies and create a single installer. What I need to produce are multiple products/installers, all with similar functionality, which are built from the same set of assemblies but differ in the set of resources used by one of the assemblies. What's the best way of doing this? ------------ The 95% Solution ----------------- Based upon Daminen_the_unbeliever's answer, a resource file per configuration can be achieved as follows: Create a class library project ("Satellite"). Delete the default .cs file and add a folder ("Default") Create a resource file in the folder "MyResources" Properties - set CustomToolNamespace to something appropriate (e.g. "XXX") Make sure the access modifier for the resources is "Public". Add the resources. Edit the source code. Refer to the resources in your code as XXX.MyResources.ResourceName) Create Configurations for each product variant ("ConfigN") For each product variant, create a folder ("VariantN") Copy and Paste the MyResources file into each VariantN folder Unload the "Satellite" project, and edit the .csproj file For each "VariantN/MyResources" <Compile> or <EmbeddedResource> tag, add a Condition="'$(Configuration)' == 'ConfigN'" attribute. Save, Reload the .csproj, and you're done... This creates a per-configuration resource file, which can (presumably) be further localized. Compile error messages are produced for any configuration that where a a resource is missing. The resource files can be localized using the standard method (create a second resources file (MyResources.fr.resx) and edit .csproj as before). The reason this is a 95% solution is that resources used to initialize forms (e.g. Form Titles, button texts) can't be easily handled in the same manner - the easiest approach seems to be to overwrite these with values from the satellite assembly.

  Read the article

• How to select table column names in a view and pass to controller in rails?

  - by zachd1_618

  So I am new to Rails, and OO programming in general. I have some grasp of the MVC architecture. My goal is to make a (nearly) completely dynamic plug-and-play plotting web server. I am fairly confused with params, forms, and select helpers. What I want to do is use Rails drop downs to basically pass parameters as strings to my controller, which will use the params to select certain column data from my database and plot it dynamically. I have the latter part of the task working, but I can't seem to pass values from my view to controller. For simplicity's sake, say my database schema looks like this: --------------Plot--------------- |____x____|____y1____|____y2____| | 1 | 1 | 1 | | 2 | 2 | 4 | | 3 | 3 | 9 | | 4 | 4 | 16 | | 5 | 5 | 25 | ... and in my Model, I have dynamic selector scopes that will let me select just certain columns of data: in Plot.rb class Plot < ActiveRecord::Base scope :select_var, lambda {|varname| select(varname)} scope :between_x, lambda {|x1,x2| where("x BETWEEN ? and ?","#{x1}","#{x2}")} So this way, I can call: irb>>@p1 = Plot.select_var(['x','y1']).between_x(1,3) and get in return a class where @p1.x and @p1.y1 are my only attributes, only for values between x=1 to x=4, which I dynamically plot. I want to start off in a view (plot/index), where I can dynamically select which variable names (table column names), and which rows from the database to fetch and plot. The problem is, most select helpers don't seem to work with columns in the database, only rows. So to select columns, I first get an array of column names that exist in my database with a function I wrote. Plots Controller def index d=Plot.first @tags = d.list_vars end So @tags = ['x','y1','y2'] Then in my plot/index.html.erb I try to use a drop down to select wich variables I send back to the controller. index.html.erb <%= select_tag( :variable, options_for_select(@plots.first.list_vars,:name,:multiple=>:true) )%> <%= button_to 'Plot now!', :controller =>"plots/plot_vars", :variable => params[:variable]%> Finally, in the controller again Plots controller ... def plot_vars @plot_data=Plot.select_vars([params[:variable]]) end The problem is everytime I try this (or one of a hundred variations thereof), the params[:variable] is nill. How can I use a drop down to pass a parameter with string variable names to the controller? Sorry its so long, I have been struggling with this for about a month now. :-( I think my biggest problem is that this setup doesn't really match the Rails architecture. I don't have "users" and "articles" as individual entities. I really have a data structure, not a data object. Trying to work with the structure in terms of data object speak is not necessarily the easiest thing to do I think. For background: My actual database has about 250 columns and a couple million rows, and they get changed and modified from time to time. I know I can make the database smarter, but its not worth it on my end. I work at a scientific institute where there are a ton of projects with databases just like this. Each one has a web developer that spends months setting up a web interface and their own janky plotting setups. I want to make this completely dynamic, as a plug-and-play solution so all you have to do is specify your database connection, and this rails setup will automatically show and plot which data you want in it. I am more of a sequential programmer and number cruncher, as are many people here. I think this project could be very helpful in the end, but its difficult to figure out for me right now.

  Read the article

• $_POST data returns empty when headers are > POST_MAX_SIZE

  - by Jared

  Hi Hopefully someone here might have an answer to my question. I have a basic form that contains simple fields, like name, number, email address etc and 1 file upload field. I am trying to add some validation into my script that detects if the file is too large and then rejects the user back to the form to select/upload a smaller file. My problem is, if a user selects a file that is bigger than my validation file size rule and larger than php.ini POST_MAX_SIZE/UPLOAD_MAX_FILESIZE and pushes submit, then PHP seems to try process the form only to fail on the POST_MAX_SIZE settings and then clears the entire $_POST array and returns nothing back to the form. Is there a way around this? Surely if someone uploads something than the max size configured in the php.ini then you can still get the rest of the $_POST data??? Here is my code. <?php function validEmail($email) { $isValid = true; $atIndex = strrpos($email, "@"); if (is_bool($atIndex) && !$atIndex) { $isValid = false; } else { $domain = substr($email, $atIndex+1); $local = substr($email, 0, $atIndex); $localLen = strlen($local); $domainLen = strlen($domain); if ($localLen < 1 || $localLen > 64) { // local part length exceeded $isValid = false; } else if ($domainLen < 1 || $domainLen > 255) { // domain part length exceeded $isValid = false; } else if ($local[0] == '.' || $local[$localLen-1] == '.') { // local part starts or ends with '.' $isValid = false; } else if (preg_match('/\\.\\./', $local)) { // local part has two consecutive dots $isValid = false; } else if (!preg_match('/^[A-Za-z0-9\\-\\.]+$/', $domain)) { // character not valid in domain part $isValid = false; } else if (preg_match('/\\.\\./', $domain)) { // domain part has two consecutive dots $isValid = false; } else if (!preg_match('/^(\\\\.|[A-Za-z0-9!#%&`_=\\/$\'*+?^{}|~.-])+$/', str_replace("\\\\","",$local))) { // character not valid in local part unless // local part is quoted if (!preg_match('/^"(\\\\"|[^"])+"$/', str_replace("\\\\","",$local))) { $isValid = false; } } } return $isValid; } //setup post variables @$name = htmlspecialchars(trim($_REQUEST['name'])); @$emailCheck = htmlspecialchars(trim($_REQUEST['email'])); @$organisation = htmlspecialchars(trim($_REQUEST['organisation'])); @$title = htmlspecialchars(trim($_REQUEST['title'])); @$phone = htmlspecialchars(trim($_REQUEST['phone'])); @$location = htmlspecialchars(trim($_REQUEST['location'])); @$description = htmlspecialchars(trim($_REQUEST['description'])); @$fileError = 0; @$phoneError = ""; //setup file upload handler $target_path = 'uploads/'; $filename = basename( @$_FILES['uploadedfile']['name']); $max_size = 8000000; // maximum file size (8mb in bytes) NB: php.ini max filesize upload is 10MB on test environment. $allowed_filetypes = Array(".pdf", ".doc", ".zip", ".txt", ".xls", ".docx", ".csv", ".rtf"); //put extensions in here that should be uploaded only. $ext = substr($filename, strpos($filename,'.'), strlen($filename)-1); // Get the extension from the filename. if(!is_writable($target_path)) die('You cannot upload to the specified directory, please CHMOD it to 777.'); //Check if we can upload to the specified upload folder. //display form function function displayForm($name, $emailCheck, $organisation, $phone, $title, $location, $description, $phoneError, $allowed_filetypes, $ext, $filename, $fileError) { //make $emailCheck global so function can get value from global scope. global $emailCheck; global $max_size; echo '<form action="geodetic_form.php" method="post" name="contact" id="contact" enctype="multipart/form-data">'."\n". '<fieldset>'."\n".'<div>'."\n"; //name echo '<label for="name"><span class="mandatory">*</span>Your name:</label>'."\n". '<input type="text" name="name" id="name" class="inputText required" value="'. $name .'" />'."\n"; //check if name field is filled out if (isset($_REQUEST['submit']) && empty($name)) { echo '<label for="name" class="error">Please enter your name.</label>'."\n"; } echo '</div>'."\n". '<div>'."\n"; //Email echo '<label for="email"><span class="mandatory">*</span>Your email:</label>'."\n". '<input type="text" name="email" id="email" class="inputText required email" value="'. $emailCheck .'" />'."\n"; // check if email field is filled out and proper format if (isset($_REQUEST['submit']) && validEmail($emailCheck) == false) { echo '<label for="email" class="error">Invalid email address entered.</label>'."\n"; } echo '</div>'."\n". '<div>'."\n"; //organisation echo '<label for="phone">Organisation:</label>'."\n". '<input type="text" name="organisation" id="organisation" class="inputText" value="'. $organisation .'" />'."\n"; echo '</div>'."\n". '</fieldset>'."\n".'<fieldset>'. "\n" . '<div>'."\n"; //title echo '<label for="phone">Title:</label>'."\n". '<input type="text" name="title" id="title" class="inputText" value="'. $title .'" />'."\n"; echo '</div>'."\n". '</fieldset>'."\n".'<fieldset>'. "\n" . '<div>'."\n"; //phone echo '<label for="phone"><span class="mandatory">*</span>Phone <br /><span class="small">(include area code)</span>:</label>'."\n". '<input type="text" name="phone" id="phone" class="inputText required" value="'. $phone .'" />'."\n"; // check if phone field is filled out that it has numbers and not characters if (isset($_REQUEST['submit']) && $phoneError == "true" && empty($phone)) echo '<label for="email" class="error">Please enter a valid phone number.</label>'."\n"; echo '</div>'."\n". '</fieldset>'."\n".'<fieldset>'. "\n" . '<div>'."\n"; //Location echo '<label class="location" for="location"><span class="mandatory">*</span>Location:</label>'."\n". '<textarea name="location" id="location" class="required">'. $location .'</textarea>'."\n"; //check if message field is filled out if (isset($_REQUEST['submit']) && empty($_REQUEST['location'])) echo '<label for="location" class="error">This field is required.</label>'."\n"; echo '</div>'."\n". '</fieldset>'."\n".'<fieldset>'. "\n" . '<div>'."\n"; //description echo '<label class="description" for="description">Description:</label>'."\n". '<textarea name="description" id="queryComments">'. $description .'</textarea>'."\n"; echo '</div>'."\n". '</fieldset>'."\n".'<fieldset>'. "\n" . '<div>'."\n"; //file upload echo '<label class="uploadedfile" for="uploadedfile">File:</label>'."\n". '<input type="file" name="uploadedfile" id="uploadedfile" value="'. $filename .'" />'."\n"; // Check if the filetype is allowed, if not DIE and inform the user. switch ($fileError) { case "1": echo '<label for="uploadedfile" class="error">The file you attempted to upload is not allowed.</label>'; break; case "2": echo '<label for="uploadedfile" class="error">The file you attempted to upload is too large.</label>'; break; } echo '</div>'."\n". '</fieldset>'; //end of form echo '<div class="submit"><input type="submit" name="submit" value="Submit" id="submit" /></div>'. '<div class="clear"><p><br /></p></div>'; } //end function //setup error validations if (isset($_REQUEST['submit']) && !empty($_REQUEST['phone']) && !is_numeric($_REQUEST['phone'])) $phoneError = "true"; if (isset($_REQUEST['submit']) && $_FILES['uploadedfile']['error'] != 4 && !in_array($ext, $allowed_filetypes)) $fileError = 1; if (isset($_REQUEST['submit']) && $_FILES["uploadedfile"]["size"] > $max_size) $fileError = 2; echo "this condition " . $fileError; $POST_MAX_SIZE = ini_get('post_max_size'); $mul = substr($POST_MAX_SIZE, -1); $mul = ($mul == 'M' ? 1048576 : ($mul == 'K' ? 1024 : ($mul == 'G' ? 1073741824 : 1))); if ($_SERVER['CONTENT_LENGTH'] > $mul*(int)$POST_MAX_SIZE && $POST_MAX_SIZE) echo "too big!!"; echo $POST_MAX_SIZE; if(empty($name) || empty($phone) || empty($location) || validEmail($emailCheck) == false || $phoneError == "true" || $fileError != 0) { displayForm($name, $emailCheck, $organisation, $phone, $title, $location, $description, $phoneError, $allowed_filetypes, $ext, $filename, $fileError); echo $fileError; echo "max size is: " .$max_size; echo "and file size is: " . $_FILES["uploadedfile"]["size"]; exit; } else { //copy file from temp to upload directory $path_of_uploaded_file = $target_path . $filename; $tmp_path = $_FILES["uploadedfile"]["tmp_name"]; echo $tmp_path; echo "and file size is: " . filesize($_FILES["uploadedfile"]["tmp_name"]); exit; if(is_uploaded_file($tmp_path)) { if(!copy($tmp_path,$path_of_uploaded_file)) { echo 'error while copying the uploaded file'; } } //test debug stuff echo "sending email..."; exit; } ?> PHP is returning this error in the log: [29-Apr-2010 10:32:47] PHP Warning: POST Content-Length of 57885895 bytes exceeds the limit of 10485760 bytes in Unknown on line 0 Excuse all the debug stuff :) FTR, I am running PHP 5.1.2 on IIS. TIA Jared

  Read the article

• 11415 compile errors FTW?!

  - by Koning Baard

  Hello. This is something I've really never seen but, I downloaded the source code of the sine wave example at http://www.audiosynth.com/sinewavedemo.html . It is in an old Project Builder Project format, and I want to compile it with Xcode (GCC). However, Xcode gives me 11415 compile errors. The first few are (all in the precompilation of AppKit.h): /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:31:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:31: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:33:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:33: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:35:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:35: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:36:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:36: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:37:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:37: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:38:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:38: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:40:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:40: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:42:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:42: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:48:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:48: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:54:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:54: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:59:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:59: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:61:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:61: error: expected identifier or '(' before '@' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:69:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:69: error: expected identifier or '(' before '+' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:71:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSObject.h:71: error: expected identifier or '(' before '+' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:39:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:39: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:40:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:40: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:41:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:41: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:42:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:42: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:43:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:43: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:44:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:44: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:45:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:45: error: expected identifier or '(' before '-' token /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:46:0 /Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/Foundation.framework/Headers/NSValue.h:46: error: expected identifier or '(' before '-' token Some of the code is: HAL.c /* * HAL.c * Sinewave * * Created by james on Fri Apr 27 2001. * Copyright (c) 2001 __CompanyName__. All rights reserved. * */ #include "HAL.h" #include "math.h" appGlobals gAppGlobals; OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* device); #define FailIf(cond, handler) \ if (cond) { \ goto handler; \ } #define FailWithAction(cond, action, handler) \ if (cond) { \ { action; } \ goto handler; \ } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // HAL Sample Code ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ //#define noErr 0 //#define false 0 OSStatus SetupHAL (appGlobalsPtr globals) { OSStatus err = noErr; UInt32 count, bufferSize; AudioDeviceID device = kAudioDeviceUnknown; AudioStreamBasicDescription format; // get the default output device for the HAL count = sizeof(globals->device); // it is required to pass the size of the data to be returned err = AudioHardwareGetProperty(kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &device); fprintf(stderr, "kAudioHardwarePropertyDefaultOutputDevice %d\n", err); if (err != noErr) goto Bail; // get the buffersize that the default device uses for IO count = sizeof(globals->deviceBufferSize); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyBufferSize, &count, &bufferSize); fprintf(stderr, "kAudioDevicePropertyBufferSize %d %d\n", err, bufferSize); if (err != noErr) goto Bail; // get a description of the data format used by the default device count = sizeof(globals->deviceFormat); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyStreamFormat, &count, &format); fprintf(stderr, "kAudioDevicePropertyStreamFormat %d\n", err); fprintf(stderr, "sampleRate %g\n", format.mSampleRate); fprintf(stderr, "mFormatFlags %08X\n", format.mFormatFlags); fprintf(stderr, "mBytesPerPacket %d\n", format.mBytesPerPacket); fprintf(stderr, "mFramesPerPacket %d\n", format.mFramesPerPacket); fprintf(stderr, "mChannelsPerFrame %d\n", format.mChannelsPerFrame); fprintf(stderr, "mBytesPerFrame %d\n", format.mBytesPerFrame); fprintf(stderr, "mBitsPerChannel %d\n", format.mBitsPerChannel); if (err != kAudioHardwareNoError) goto Bail; FailWithAction(format.mFormatID != kAudioFormatLinearPCM, err = paramErr, Bail); // bail if the format is not linear pcm // everything is ok so fill in these globals globals->device = device; globals->deviceBufferSize = bufferSize; globals->deviceFormat = format; Bail: return (err); } /* struct AudioStreamBasicDescription { Float64 mSampleRate; // the native sample rate of the audio stream UInt32 mFormatID; // the specific encoding type of audio stream UInt32 mFormatFlags; // flags specific to each format UInt32 mBytesPerPacket; // the number of bytes in a packet UInt32 mFramesPerPacket; // the number of frames in each packet UInt32 mBytesPerFrame; // the number of bytes in a frame UInt32 mChannelsPerFrame; // the number of channels in each frame UInt32 mBitsPerChannel; // the number of bits in each channel }; typedef struct AudioStreamBasicDescription AudioStreamBasicDescription; */ // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // This is a simple playThru ioProc. It simply places the data in the input buffer back into the output buffer. // Watch out for feedback from Speakers to Microphone OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* appGlobals) { appGlobalsPtr globals = appGlobals; int i; double phase = gAppGlobals.phase; double amp = gAppGlobals.amp; double pan = gAppGlobals.pan; double freq = gAppGlobals.freq * 2. * 3.14159265359 / globals->deviceFormat.mSampleRate; int numSamples = globals->deviceBufferSize / globals->deviceFormat.mBytesPerFrame; // assume floats for now.... float *out = outOutputData->mBuffers[0].mData; for (i=0; i<numSamples; ++i) { float wave = sin(phase) * amp; phase = phase + freq; *out++ = wave * (1.0-pan); *out++ = wave * pan; } gAppGlobals.phase = phase; return (kAudioHardwareNoError); } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OSStatus StartPlayingThruHAL(appGlobalsPtr globals) { OSStatus err = kAudioHardwareNoError; if (globals->soundPlaying) return 0; globals->phase = 0.0; err = AudioDeviceAddIOProc(globals->device, appIOProc, (void *) globals); // setup our device with an IO proc if (err != kAudioHardwareNoError) goto Bail; err = AudioDeviceStart(globals->device, appIOProc); // start playing sound through the device if (err != kAudioHardwareNoError) goto Bail; globals->soundPlaying = true; // set the playing status global to true Bail: return (err); } // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ OSStatus StopPlayingThruHAL(appGlobalsPtr globals) { OSStatus err = kAudioHardwareNoError; if (!globals->soundPlaying) return 0; err = AudioDeviceStop(globals->device, appIOProc); // stop playing sound through the device if (err != kAudioHardwareNoError) goto Bail; err = AudioDeviceRemoveIOProc(globals->device, appIOProc); // remove the IO proc from the device if (err != kAudioHardwareNoError) goto Bail; globals->soundPlaying = false; // set the playing status global to false Bail: return (err); } Sinewave.m // // a very simple Cocoa CoreAudio app // by James McCartney [email protected] www.audiosynth.com // // Sinewave - this class implements a sine oscillator with dezippered control of frequency, pan and amplitude // #import "Sinewave.h" // define a C struct from the Obj-C object so audio callback can access data typedef struct { @defs(Sinewave); } sinewavedef; // this is the audio processing callback. OSStatus appIOProc (AudioDeviceID inDevice, const AudioTimeStamp* inNow, const AudioBufferList* inInputData, const AudioTimeStamp* inInputTime, AudioBufferList* outOutputData, const AudioTimeStamp* inOutputTime, void* defptr) { sinewavedef* def = defptr; // get access to Sinewave's data int i; // load instance vars into registers double phase = def->phase; double amp = def->amp; double pan = def->pan; double freq = def->freq; double ampz = def->ampz; double panz = def->panz; double freqz = def->freqz; int numSamples = def->deviceBufferSize / def->deviceFormat.mBytesPerFrame; // assume floats for now.... float *out = outOutputData->mBuffers[0].mData; for (i=0; i<numSamples; ++i) { float wave = sin(phase) * ampz; // generate sine wave phase = phase + freqz; // increment phase // write output *out++ = wave * (1.0-panz); // left channel *out++ = wave * panz; // right channel // de-zipper controls panz = 0.001 * pan + 0.999 * panz; ampz = 0.001 * amp + 0.999 * ampz; freqz = 0.001 * freq + 0.999 * freqz; } // save registers back to object def->phase = phase; def->freqz = freqz; def->ampz = ampz; def->panz = panz; return kAudioHardwareNoError; } @implementation Sinewave - (void) setup { OSStatus err = kAudioHardwareNoError; UInt32 count; device = kAudioDeviceUnknown; initialized = NO; // get the default output device for the HAL count = sizeof(device); // it is required to pass the size of the data to be returned err = AudioHardwareGetProperty(kAudioHardwarePropertyDefaultOutputDevice, &count, (void *) &device); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioHardwarePropertyDefaultOutputDevice error %ld\n", err); return; } // get the buffersize that the default device uses for IO count = sizeof(deviceBufferSize); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyBufferSize, &count, &deviceBufferSize); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioDevicePropertyBufferSize error %ld\n", err); return; } fprintf(stderr, "deviceBufferSize = %ld\n", deviceBufferSize); // get a description of the data format used by the default device count = sizeof(deviceFormat); // it is required to pass the size of the data to be returned err = AudioDeviceGetProperty(device, 0, false, kAudioDevicePropertyStreamFormat, &count, &deviceFormat); if (err != kAudioHardwareNoError) { fprintf(stderr, "get kAudioDevicePropertyStreamFormat error %ld\n", err); return; } if (deviceFormat.mFormatID != kAudioFormatLinearPCM) { fprintf(stderr, "mFormatID != kAudioFormatLinearPCM\n"); return; } if (!(deviceFormat.mFormatFlags & kLinearPCMFormatFlagIsFloat)) { fprintf(stderr, "Sorry, currently only works with float format....\n"); return; } initialized = YES; fprintf(stderr, "mSampleRate = %g\n", deviceFormat.mSampleRate); fprintf(stderr, "mFormatFlags = %08lX\n", deviceFormat.mFormatFlags); fprintf(stderr, "mBytesPerPacket = %ld\n", deviceFormat.mBytesPerPacket); fprintf(stderr, "mFramesPerPacket = %ld\n", deviceFormat.mFramesPerPacket); fprintf(stderr, "mChannelsPerFrame = %ld\n", deviceFormat.mChannelsPerFrame); fprintf(stderr, "mBytesPerFrame = %ld\n", deviceFormat.mBytesPerFrame); fprintf(stderr, "mBitsPerChannel = %ld\n", deviceFormat.mBitsPerChannel); } - (void)setAmpVal:(double)val { amp = val; } - (void)setFreqVal:(double)val { freq = val * 2. * 3.14159265359 / deviceFormat.mSampleRate; } - (void)setPanVal:(double)val { pan = val; } - (BOOL)start { OSStatus err = kAudioHardwareNoError; sinewavedef *def; if (!initialized) return false; if (soundPlaying) return false; // initialize phase and de-zipper filters. phase = 0.0; freqz = freq; ampz = amp; panz = pan; def = (sinewavedef *)self; err = AudioDeviceAddIOProc(device, appIOProc, (void *) def); // setup our device with an IO proc if (err != kAudioHardwareNoError) return false; err = AudioDeviceStart(device, appIOProc); // start playing sound through the device if (err != kAudioHardwareNoError) return false; soundPlaying = true; // set the playing status global to true return true; } - (BOOL)stop { OSStatus err = kAudioHardwareNoError; if (!initialized) return false; if (!soundPlaying) return false; err = AudioDeviceStop(device, appIOProc); // stop playing sound through the device if (err != kAudioHardwareNoError) return false; err = AudioDeviceRemoveIOProc(device, appIOProc); // remove the IO proc from the device if (err != kAudioHardwareNoError) return false; soundPlaying = false; // set the playing status global to false return true; } @end Can anyone help me compiling this example? I'd really appriciate it. Thanks

  Read the article

• How do I ensure that a JPanel Shrinks when the parent frame is resized?

  - by dah

  I have a basic notes panel that I'm looking to shrink the width of when the parent jframe is resized but it isn't happening. I'm using nested gridbaglayouts. package com.protocase.notes.views; import com.protocase.notes.controller.NotesController; import com.protocase.notes.model.Subject; import com.protocase.notes.model.Note; import com.protocase.notes.model.database.PMSNotesAdapter; import java.awt.Color; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import javax.swing.BorderFactory; import javax.swing.JButton; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JScrollPane; /** * @author DavidH */ public class NotesViewer extends JPanel { // <editor-fold defaultstate="collapsed" desc="Attributes"> private Subject subject; private NotesController controller; //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Getters N' Setters"> /** * Gets back the current subject. * @return */ public Subject getSubject() { return subject; } public NotesController getController() { return controller; } public void setController(NotesController controller) { this.controller = controller; } /** * Should clear the panel of the current subject and load the details for * the other object. * @param subject */ public void setSubject(Subject subject) { this.subject = subject; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Constructor"> /** * -- Sets up a note viewer with a subject and a controller. Likely this * would be the constructor used if you were passing off from another * NoteViewer or something else that used a notes adapter or controller. * @param subject * @param controller */ public NotesViewer(Subject subject, NotesController controller) { this.subject = subject; this.controller = controller; initComponents(); } /** * -- Sets up a note view with a subject and creates a new controller. This * would be the constructor typically chosen if choosing notes was * infrequent and only one or two notes needs to be displayed. * @param subject */ public NotesViewer(Subject subject) { this(subject, new NotesController(new PMSNotesAdapter())); } /** * -- Sets up a note view without a subject and creates a new controller. * This would be for a note viewer without any notes, perhaps populating * as you choose values in another form. * @param subject */ public NotesViewer() { this(null); } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="initComponents()"> /** * Sets up the view for the NotesViewer */ private void initComponents() { // -- Make a new panel for the header JPanel panel = new JPanel(); panel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.gridx = 0; c.fill = GridBagConstraints.HORIZONTAL; c.gridy = 0; c.weightx = .5; //c.anchor = GridBagConstraints.NORTHWEST; JLabel label = new JLabel("Viewing Notes for [Subject]"); label.setAlignmentX(JLabel.LEFT_ALIGNMENT); label.setBorder(BorderFactory.createLineBorder(Color.YELLOW)); panel.add(label); JButton newNoteButton = new JButton("New"); c = new GridBagConstraints(); // c.fill = GridBagConstraints.HORIZONTAL; c.gridx = 1; c.gridy = 0; c.weightx = .5; c.anchor = GridBagConstraints.EAST; panel.add(newNoteButton, c); // -- NotePanels c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL; c.weightx = 1; c.weighty = 1; c.gridx = 0; c.gridwidth = 2; int y = 1; for (Note n : subject.getNotes()) { c.gridy = y++; panel.add(new NotesPanel(n, controller), c); } this.setLayout(new GridBagLayout()); GridBagConstraints pc = new GridBagConstraints(); pc.gridx = 0; pc.gridy = 0; pc.weightx = 1; pc.weighty = 1; pc.fill = GridBagConstraints.BOTH; panel.setBackground(Color.blue); JScrollPane scroll = new JScrollPane(); scroll.setViewportView(panel); //scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER); this.add(scroll, pc); //this.add(panel, pc); // -- Add it all to the layout } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="private methods"> //</editor-fold> } package com.protocase.notes.views; import com.protocase.notes.controller.NotesController; import com.protocase.notes.model.Note; import java.awt.CardLayout; import java.awt.Color; import java.awt.Component; import java.awt.Dimension; import java.awt.GridBagConstraints; import java.awt.GridBagLayout; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.text.DateFormat; import java.text.SimpleDateFormat; import javax.swing.BorderFactory; import javax.swing.JButton; import javax.swing.JLabel; import javax.swing.JPanel; import javax.swing.JScrollPane; import javax.swing.JTextArea; import javax.swing.JTextField; import javax.swing.border.BevelBorder; import javax.swing.border.Border; import javax.swing.border.MatteBorder; /** * @author dah01 */ public class NotesPanel extends JPanel { // <editor-fold defaultstate="collapsed" desc="Attributes"> private Note note; private NotesController controller; private CardLayout cardLayout; private JTextArea viewTextArea; private JTextArea editTextArea; //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Getters N' Setters"> public NotesController getController() { return controller; } public void setController(NotesController controller) { this.controller = controller; } public Note getNote() { return note; } public void setNote(Note note) { this.note = note; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Constructor"> /** * Sets up a note panel that shows everything about the note. * @param note */ public NotesPanel(Note note, NotesController controller) { this.note = note; cardLayout = new CardLayout(); this.setLayout(cardLayout); // -- Setup the layout manager. this.setBackground(new Color(199, 187, 192)); this.setBorder(new BevelBorder(BevelBorder.RAISED)); // -- ViewPanel this.add("ViewPanel", initViewPanel()); this.add("EditPanel", initEditPanel()); } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="EditPanel"> private JPanel initEditPanel() { JPanel editPanel = new JPanel(); editPanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL; c.gridy = 0; c.weightx = 1; c.weighty = 0.3; editPanel.add(initCreatorLabel(), c); c.gridy++; editPanel.add(initEditTextScroll(), c); c.gridy++; c.anchor = GridBagConstraints.WEST; c.fill = GridBagConstraints.NONE; editPanel.add(initEditorLabel(), c); c.gridx++; c.anchor = GridBagConstraints.EAST; editPanel.add(initSaveButton(), c); return editPanel; } private JScrollPane initEditTextScroll() { this.editTextArea = new JTextArea(note.getContents()); editTextArea.setLineWrap(true); editTextArea.setWrapStyleWord(true); JScrollPane scrollPane = new JScrollPane(editTextArea); scrollPane.setAlignmentX(JScrollPane.LEFT_ALIGNMENT); Border b = scrollPane.getViewportBorder(); MatteBorder mb = BorderFactory.createMatteBorder(2, 2, 2, 2, Color.BLUE); scrollPane.setBorder(mb); return scrollPane; } private JButton initSaveButton() { final CardLayout l = this.cardLayout; final JPanel p = this; final NotesController c = this.controller; final Note n = this.note; final JTextArea noteText = this.viewTextArea; final JTextArea textToSubmit = this.editTextArea; ActionListener al = new ActionListener() { @Override public void actionPerformed(ActionEvent e) { //controller.saveNote(n); noteText.setText(textToSubmit.getText()); l.next(p); } }; JButton saveButton = new JButton("Save"); saveButton.addActionListener(al); saveButton.setPreferredSize(new Dimension(62, 26)); return saveButton; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="ViewPanel"> private JPanel initViewPanel() { JPanel viewPanel = new JPanel(); viewPanel.setLayout(new GridBagLayout()); GridBagConstraints c = new GridBagConstraints(); c.fill = GridBagConstraints.HORIZONTAL ; c.gridy = 0; c.weightx = 1; c.weighty = 0.3; viewPanel.add(initCreatorLabel(), c); c.gridy++; viewPanel.add(this.initNoteTextArea(), c); c.fill = GridBagConstraints.NONE; c.anchor = GridBagConstraints.WEST; c.gridy++; viewPanel.add(initEditorLabel(), c); c.gridx++; c.anchor = GridBagConstraints.EAST; viewPanel.add(initEditButton(), c); return viewPanel; } private JLabel initCreatorLabel() { DateFormat formatter = new SimpleDateFormat("yyyy-MM-dd"); if (note != null) { String noteBy = "Note by " + note.getCreator(); String noteCreated = formatter.format(note.getDateCreated()); JLabel creatorLabel = new JLabel(noteBy + " @ " + noteCreated); creatorLabel.setAlignmentX(JLabel.LEFT_ALIGNMENT); return creatorLabel; } else { System.out.println("NOTE IS NULL"); return null; } } private JScrollPane initNoteTextArea() { // -- Setup the notes area. this.viewTextArea = new JTextArea(note.getContents()); viewTextArea.setEditable(false); viewTextArea.setLineWrap(true); viewTextArea.setWrapStyleWord(true); JScrollPane scrollPane = new JScrollPane(viewTextArea); scrollPane.setAlignmentX(JScrollPane.LEFT_ALIGNMENT); return scrollPane; } private JLabel initEditorLabel() { // -- Setup the edited by label. JLabel editorLabel = new JLabel(" -- Last edited by " + note.getLastEdited() + " at " + note.getDateModified()); editorLabel.setAlignmentX(Component.LEFT_ALIGNMENT); return editorLabel; } private JButton initEditButton() { final CardLayout l = this.cardLayout; final JPanel p = this; ActionListener ar = new ActionListener() { @Override public void actionPerformed(ActionEvent e) { l.next(p); } }; JButton editButton = new JButton("Edit"); editButton.setPreferredSize(new Dimension(62,26)); editButton.addActionListener(ar); return editButton; } //</editor-fold> // <editor-fold defaultstate="collapsed" desc="Grow Width When Resized"> @Override public Dimension getPreferredSize() { int fw = this.getParent().getSize().width; int fh = super.getPreferredSize().height; return new Dimension(fw,fh); } //</editor-fold> }

  Read the article

• "too many automatic redirections were attempted" error message when using a httpWebRequest in .NET

  - by tooleb

  I am attempting to request a page like "http://www.google.com/?q=random" using the webrequest class in vb.net. we are behind a firewall, so we have to authenticate our requests. I have gotten past the authentication part by adding my credentials. But once that works it seems to go into a redirecting loop. Does anyone have an ideas, comments, suggetions why this is? Has anyone else experienced this problem? Dim loHttp As HttpWebRequest = CType(WebRequest.Create(_url), HttpWebRequest) loHttp.Timeout = 10000 loHttp.Method = "GET" loHttp.KeepAlive = True loHttp.AllowAutoRedirect = True loHttp.PreAuthenticate = True Dim _cred1 As NetworkCredential = ... //this is setup //snip out this stuff loHttp.Credentials = _cc loWebResponse = loHttp.GetResponse()

  Read the article

• PetStore 2.0 - java.lang.RuntimeException: javax.naming.NamingException: Lookup failed for 'jdbc/Pet

  - by Harry Pham

  I download PetStore 2.0 from https://blueprints.dev.java.net/servlets/ProjectDocumentList?folderID=5315&expandFolder=5315&folderID=0. I tried to build them in netbean 6.8 and I got this error SEVERE: Exception while preparing the app java.lang.RuntimeException: javax.naming.NamingException: Lookup failed for 'jdbc/PetstoreDB' in SerialContext [Root exception is javax.naming.NameNotFoundException: PetstoreDB not found] Seems like it cant find 'jdbc/PetStoreDB'. So I went back to the website and it look like I have to build the database via Ant script. So at the PetStore home directory, I run this command ant setup ant run And I got the same error when I try ant run [exec] Deprecated syntax, instead use: [exec] asadmin --port 4848 --host localhost --passwordfile /Users/KingdomHeart/.asadminpass --user admin deploy [options] ... [exec] com.sun.enterprise.admin.cli.CommandException: remote failure: Exception while preparing the app : java.lang.RuntimeException: javax.naming.NamingException: Lookup failed for 'jdbc/PetstoreDB' in SerialContext [Root exception is javax.naming.NameNotFoundException: PetstoreDB not found] [exec] [exec] [exec] Command deploy failed. Any idea what happen?

  Read the article

• TeamCity error: svn: connection refused by the server

  - by chrisk

  We have a Continuous Integration environment setup with TeamCity and subversion. TeamCity gets the latest source from svn and does a build (Visual Studio) on every commit. Sometimes we get the following TeamCity error when the build runs. Doing a couple of force builds gets TeamCity running succesfully. Build errors [12:35:24]: Patch is broken, can be found in file: C:\TeamCity\buildAgent\temp\cache\temp6036patch_803[12:35:24]: RunBuildException when running build stage UpdateSourcesFromServer: Failed to build patch for build 519 {build id=803}, VCS root: svn: https://svn.myDomain.com/repos/myApplication {id=2}, due to error: org.tmatesoft.svn.core.SVNException: svn: connection refused by the server svn: REPORT request failed on '/repos/myApplication/!svn/vcc/default' Any ideas why this might be happening ?

  Read the article

• There is no ViewData item of type 'IEnumerable<SelectListItem>' that has the key 'xxx'.

  - by Jimbo

  There are a couple of posts about this on Stack Overflow but none with an answer that seem to fix the problem in my current situation. I have a page with a table in it, each row has a number of text fields and a dropdown. All the dropdowns need to use the same SelectList data so I have set it up as follows: Controller ViewData["Submarkets"] = new SelectList(submarketRep.AllOrdered(), "id", "name"); View <%= Html.DropDownList("submarket_0", (SelectList)ViewData["Submarkets"], "(none)") %> I have used exactly this setup in many places, but for some reason in this particular view I get the error: There is no ViewData item of type 'IEnumerable' that has the key 'submarket_0'.

  Read the article

• Quick guide to Oracle IRM 11g: Configuring SSL

  - by Simon Thorpe

  Quick guide to Oracle IRM 11g index So far in this guide we have an IRM Server up and running, however I skipped over SSL configuration in the previous article because I wanted to focus in more detail now. You can, if you wish, not bother with setting up SSL, but considering this is a security technology it is worthwhile doing. Contents Setting up a one way, self signed SSL certificate in WebLogic Setting up an official SSL certificate in Apache 2.x Configuring Apache to proxy traffic to the IRM server There are two common scenarios in which an Oracle IRM server is configured. For a development or evaluation system, people usually communicate directly to the WebLogic Server running the IRM service. However in a production environment and for some proof of concept evaluations that require a setup reflecting a production system, the traffic to the IRM server travels via a web server proxy, commonly Apache. In this guide we are building an Oracle Enterprise Linux based IRM service and this article will go over the configuration of SSL in WebLogic and also in Apache. Like in the past articles, we are going to use two host names in the configuration below,irm.company.com will refer to the public Apache server irm.company.internal will refer to the internal WebLogic IRM server Setting up a one way, self signed SSL certificate in WebLogic First lets look at creating just a simple self signed SSL certificate to be used in WebLogic. This is a quick and easy way to get SSL working in your environment, however the downside is that no browsers are going to trust this certificate you create and you'll need to manually install the certificate onto any machine's communicating with the server. This is fine for development or when you have only a few users evaluating the system, but for any significant use it's usually better to have a fully trusted certificate in use and I explain that in the next section. But for now lets go through creating, installing and testing a self signed certificate. We use a library in Java to create the certificates, open a console and running the following commands. Note you should choose your own secure passwords whenever you see password below. [oracle@irm /] source /oracle/middleware/wlserver_10.3/server/bin/setWLSEnv.sh [oracle@irm /] cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irm /] java utils.CertGen -selfsigned -certfile MyOwnSelfCA.cer -keyfile MyOwnSelfKey.key -keyfilepass password -cn "irm.oracle.demo" [oracle@irm /] java utils.ImportPrivateKey -keystore MyOwnIdentityStore.jks -storepass password -keypass password -alias trustself -certfile MyOwnSelfCA.cer.pem -keyfile MyOwnSelfKey.key.pem -keyfilepass password [oracle@irm /] keytool -import -trustcacerts -alias trustself -keystore TrustMyOwnSelf.jks -file MyOwnSelfCA.cer.der -keyalg RSA We now have two Java Key Stores, MyOwnIdentityStore.jks and TrustMyOwnSelf.jks. These contain keys and certificates which we will use in WebLogic Server. Now we need to tell the IRM server to use these stores when setting up SSL connections for incoming requests. Make sure the Admin server is running and login into the WebLogic Console at http://irm.company.intranet:7001/console and do the following; In the menu on the left, select the + next to Environment to expose the submenu, then click on Servers. You will see two servers in the list, AdminServer(admin) and IRM_server1. If the IRM server is running, shut it down either by hitting CONTROL + C in the console window it was started from, or you can switch to the CONTROL tab, select IRM_server1 and then select the Shutdown menu and then Force Shutdown Now. In the Configuration tab select IRM_server1 and switch to the Keystores tab. By default WebLogic Server uses it's own demo identity and trust. We are now going to switch to the self signed one's we've just created. So select the Change button and switch to Custom Identity and Custom Trust and hit save. Now we have to complete the resulting fields, the setting's i've used in my evaluation server are below. IdentityCustom Identity Keystore: /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/MyOwnIdentityStore.jks Custom Identity Keystore Type: JKS Custom Identity Keystore Passphrase: password Confirm Custom Identity Keystore Passphrase: password TrustCustom Trust Keystore: /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/TrustMyOwnSelf.jks Custom Trust Keystore Type: JKS Custom Trust Keystore Passphrase: password Confirm Custom Trust Keystore Passphrase: password Now click on the SSL tab for the IRM_server1 and enter in the alias and passphrase, in my demo here the details are; IdentityPrivate Key Alias: trustself Private Key Passphrase: password Confirm Private Key Passphrase: password And hit save. Now lets test a connection to the IRM server over HTTPS using SSL. Go back to a console window and start the IRM server, a quick reminder on how to do this is... [oracle@irm /] cd /oracle/middleware/user_projects/domains/irm_domain/bin [oracle@irm /] ./startManagedWeblogic IRM_server1 Once running, open a browser and head to the SSL port of the server. By default the IRM server will be listening on the URL https://irm.company.intranet:16101/irm_rights. Note in the example image on the right the port is 7002 because it's a system that has the IRM services installed on the Admin server, this isn't typical (or advisable). Your system is going to have a separate managed server which will be listening on port 16101. Once you open this address you will notice that your browser is going to complain that the server certificate is untrusted. The images on the right show how Firefox displays this error. You are going to be prompted every time you create a new SSL session with the server, both from the browser and more annoyingly from the IRM Desktop. If you plan on always using a self signed certificate, it is worth adding it to the Windows certificate store so that when you are accessing sealed content you do not keep being informed this certificate is not trusted. Follow these instructions (which are for Internet Explorer 8, they may vary for your version of IE.) Start Internet Explorer and open the URL to your IRM server over SSL, e.g. https://irm.company.intranet:16101/irm_rights. IE will complain that about the certificate, click on Continue to this website (not recommended). From the IE Tools menu select Internet Options and from the resulting dialog select Security and then click on Trusted Sites and then the Sites button. Add to the list of trusted sites a URL which mates the server you are accessing, e.g. https://irm.company.intranet/ and select OK. Now refresh the page you were accessing and next to the URL you should see a red cross and the words Certificate Error. Click on this button and select View Certificates. You will now see a dialog with the details of the self signed certificate and the Install Certificate... button should be enabled. Click on this to start the wizard. Click next and you'll be asked where you should install the certificate. Change the option to Place all certificates in the following store. Select browse and choose the Trusted Root Certification Authorities location and hit OK. You'll then be prompted to install the certificate and answer yes. You also need to import the root signed certificate into the same location, so once again select the red Certificate Error option and this time when viewing the certificate, switch to the Certification Path tab and you should see a CertGenCAB certificate. Select this and then click on View Certificate and go through the same process as above to import the certificate into the store. Finally close all instances of the IE browser and re-access the IRM server URL again, this time you should not receive any errors. Setting up an official SSL certificate in Apache 2.x At this point we now have an IRM server that you can communicate with over SSL. However this certificate isn't trusted by any browser because it's path of trust doesn't end in a recognized certificate authority (CA). Also you are communicating directly to the WebLogic Server over a non standard SSL port, 16101. In a production environment it is common to have another device handle the initial public internet traffic and then proxy this to the WebLogic server. The diagram below shows a very simplified view of this type of deployment. What i'm going to walk through next is configuring Apache to proxy traffic to a WebLogic server and also to use a real SSL certificate from an official CA. First step is to configure Apache to handle incoming requests over SSL. In this guide I am configuring the IRM service in Oracle Enterprise Linux 5 update 3 and Apache 2.2.3 which came with OpenSSL and mod_ssl components. Before I purchase an SSL certificate, I need to generate a certificate request from the server. Oracle.com uses Verisign and for my own personal needs I use cheaper certificates from GoDaddy. The following instructions are specific to Apache, but there are many references out there for other web servers. For Apache I have OpenSSL and the commands are; [oracle@irm /] cd /usr/bin [oracle@irm bin] openssl genrsa -des3 -out irm-apache-server.key 2048 Generating RSA private key, 2048 bit long modulus ............................+++ .........+++ e is 65537 (0x10001) Enter pass phrase for irm-apache-server.key: Verifying - Enter pass phrase for irm-apache-server.key: [oracle@irm bin] openssl req -new -key irm-apache-server.key -out irm-apache-server.csr Enter pass phrase for irm-apache-server.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [GB]:US State or Province Name (full name) [Berkshire]:CA Locality Name (eg, city) [Newbury]:San Francisco Organization Name (eg, company) [My Company Ltd]:Oracle Organizational Unit Name (eg, section) []:Security Common Name (eg, your name or your server's hostname) []:irm.company.com Email Address []:[email protected] Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []:testing An optional company name []: You must make sure to remember the pass phrase you used in the initial key generation, you will need this when later configuring Apache. In the /usr/bin directory there are now two new files. The irm-apache-server.csr contains our certificate request and is what you cut and paste, or upload, to your certificate authority when you purchase and validate your SSL certificate. In response you will typically get two files. Your server certificate and another certificate file that will likely contain a set of certificates from your CA which validate your certificate's trust. Next we need to configure Apache to use these files. Typically there is an ssl.conf file which is where all the SSL configuration is done. On my Oracle Enterprise Linux server this file is located in /etc/httpd/conf.d/ssl.conf and i've added the following lines. <VirtualHost irm.company.com> # Setup SSL for irm.company.com ServerName irm.company.com SSLEngine On SSLCertificateFile /oracle/secure/irm.company.com.crt SSLCertificateKeyFile /oracle/secure/irm.company.com.key SSLCertificateChainFile /oracle/secure/gd_bundle.crt </VirtualHost> Restarting Apache (apachectl restart) and I can now attempt to connect to the Apache server in a web browser, https://irm.company.com/. If all is configured correctly I should now see an Apache test page delivered to me over HTTPS. Configuring Apache to proxy traffic to the IRM server Final piece in setting up SSL is to have Apache proxy requests for the IRM server but do so securely. So the requests to Apache will be over HTTPS using a legitimate certificate, but we can also configure Apache to proxy these requests internally across to the IRM server using SSL with the self signed certificate we generated at the start of this article. To do this proxying we use the WebLogic Web Server plugin for Apache which you can download here from Oracle. Download the zip file and extract onto the server. The file extraction reveals a set of zip files, each one specific to a supported web server. In my instance I am using Apache 2.2 32bit on an Oracle Enterprise Linux, 64 bit server. If you are not sure what version your Apache server is, run the command /usr/sbin/httpd -V and you'll see version and it its 32 or 64 bit. Mine is a 32bit server so I need to extract the file WLSPlugin1.1-Apache2.2-linux32-x86.zip. The from the resulting lib folder copy the file mod_wl.so into /usr/lib/httpd/modules/. First we want to test that the plug in will work for regular HTTP traffic. Edit the httpd.conf for Apache and add the following section at the bottom. LoadModule weblogic_module modules/mod_wl.so <IfModule mod_weblogic.c>    WebLogicHost irm.company.internal    WebLogicPort 16100    WLLogFile /tmp/wl-proxy.log </IfModule> <Location /irm_rights>    SetHandler weblogic-handler </Location> <Location /irm_desktop>    SetHandler weblogic-handler </Location> <Location /irm_sealing>    SetHandler weblogic-handler </Location> <Location /irm_services>    SetHandler weblogic-handler </Location> Now restart Apache again (apachectl restart) and now open a browser to http://irm.company.com/irm_rights. Apache will proxy the HTTP traffic from the port 80 of your Apache server to the IRM service listening on port 16100 of the WebLogic Managed server. Note above I have included all four of the Locations you might wish to proxy. http://irm.company.internalirm_rights is the URL to the management website, /irm_desktop is the URL used for the IRM Desktop to communicate. irm_sealing is for web services based document sealing and irm_services is for IRM server web services. The last two are typically only used when you have the IRM server integrated with another application and it is unlikely you'd be accessing these resources from the public facing Apache server. However, just in case, i've mentioned them above. Now let's enable SSL communication from Apache to WebLogic. In the ZIP file we extracted were some more modules we need to copy into the Apache folder. Looking back in the lib that we extracted, there are some more files. Copy the following into the /usr/lib/httpd/modules/ folder. libwlssl.so libnnz11.so libclntsh.so.11.1 Now the documentation states that should only need to do this, but I found that I also needed to create an environment variable called LD_LIBRARY_PATH and point this to the folder /usr/lib/httpd/modules/. If I didn't do this, starting Apache with the WebLogic module configured to SSL would throw the error. [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0 So I had to edit the file /etc/profile and add the following lines at the bottom. You may already have the LD_LIBRARY_PATH variable defined, therefore simply add this path to it. LD_LIBRARY_PATH=/usr/lib/httpd/modules/ export LD_LIBRARY_PATH Now the WebLogic plug in uses an Oracle Wallet to store the required certificates.You'll need to copy the self signed certificate from the IRM server over to the Apache server. Copy over the MyOwnSelfCA.cer.der into the same folder where you are storing your public certificates, in my example this is /oracle/secure. It's worth mentioning these files should ONLY be readable by root (the user Apache runs as). Now lets create an Oracle Wallet and import the self signed certificate from the IRM server. The file orapki was included in the bin folder of the Apache 1.1 plugin zip you extracted. orapki wallet create -wallet /oracle/secure/my-wallet -auto_login_only orapki wallet add -wallet /oracle/secure/my-wallet -trusted_cert -cert MyOwnSelfCA.cer.der -auto_login_only Finally change the httpd.conf to reflect that we want the WebLogic Apache plug-in to use HTTPS/SSL and not just plain HTTP. <IfModule mod_weblogic.c>    WebLogicHost irm.company.internal    WebLogicPort 16101    SecureProxy ON    WLSSLWallet /oracle/secure/my-wallet    WLLogFile /tmp/wl-proxy.log </IfModule> Then restart Apache once more and you can go back to the browser to test the communication. Opening the URL https://irm.company.com/irm_rights will proxy your request to the WebLogic server at https://irm.company.internal:16101/irm_rights. At this point you have a fully functional Oracle IRM service, the next step is to create a sealed document and test the entire system.

  Read the article

• How to reduce iOS AVPlayer start delay

  - by Bernt Habermeier

  Note, for the below question: All assets are local on the device -- no network streaming is taking place. The videos contain audio tracks. I'm working on an iOS application that requires playing video files with minimum delay to start the video clip in question. Unfortunately we do not know what specific video clip is next until we actually need to start it up. Specifically: When one video clip is playing, we will know what the next set of (roughly) 10 video clips are, but we don't know which one exactly, until it comes time to 'immediately' play the next clip. What I've done to look at actual start delays is to call addBoundaryTimeObserverForTimes on the video player, with a time period of one millisecond to see when the video actually started to play, and I take the difference of that time stamp with the first place in the code that indicates which asset to start playing. From what I've seen thus-far, I have found that using the combination of AVAsset loading, and then creating an AVPlayerItem from that once it's ready, and then waiting for AVPlayerStatusReadyToPlay before I call play, tends to take between 1 and 3 seconds to start the clip. I've since switched to what I think is roughly equivalent: calling [AVPlayerItem playerItemWithURL:] and waiting for AVPlayerItemStatusReadyToPlay to play. Roughly same performance. One thing I'm observing is that the first AVPlayer item load is slower than the rest. Seems one idea is to pre-flight the AVPlayer with a short / empty asset before trying to play the first video might be of good general practice. [http://stackoverflow.com/questions/900461/slow-start-for-avaudioplayer-the-first-time-a-sound-is-played] I'd love to get the video start times down as much as possible, and have some ideas of things to experiment with, but would like some guidance from anyone that might be able to help. Update: idea 7, below, as-implemented yields switching times of around 500 ms. This is an improvement, but it it'd be nice to get this even faster. Idea 1: Use N AVPlayers (won't work) Using ~ 10 AVPPlayer objects and start-and-pause all ~ 10 clips, and once we know which one we really need, switch to, and un-pause the correct AVPlayer, and start all over again for the next cycle. I don't think this works, because I've read there is roughly a limit of 4 active AVPlayer's in iOS. There was someone asking about this on StackOverflow here, and found out about the 4 AVPlayer limit: fast-switching-between-videos-using-avfoundation Idea 2: Use AVQueuePlayer (won't work) I don't believe that shoving 10 AVPlayerItems into an AVQueuePlayer would pre-load them all for seamless start. AVQueuePlayer is a queue, and I think it really only makes the next video in the queue ready for immediate playback. I don't know which one out of ~10 videos we do want to play back, until it's time to start that one. ios-avplayer-video-preloading Idea 3: Load, Play, and retain AVPlayerItems in background (not 100% sure yet -- but not looking good) I'm looking at if there is any benefit to load and play the first second of each video clip in the background (suppress video and audio output), and keep a reference to each AVPlayerItem, and when we know which item needs to be played for real, swap that one in, and swap the background AVPlayer with the active one. Rinse and Repeat. The theory would be that recently played AVPlayer/AVPlayerItem's may still hold some prepared resources which would make subsequent playback faster. So far, I have not seen benefits from this, but I might not have the AVPlayerLayer setup correctly for the background. I doubt this will really improve things from what I've seen. Idea 4: Use a different file format -- maybe one that is faster to load? I'm currently using .m4v's (video-MPEG4) H.264 format. I have not played around with other formats, but it may well be that some formats are faster to decode / get ready than others. Possible still using video-MPEG4 but with a different codec, or maybe quicktime? Maybe a lossless video format where decoding / setup is faster? Idea 5: Combination of lossless video format + AVQueuePlayer If there is a video format that is fast to load, but maybe where the file size is insane, one idea might be to pre-prepare the first 10 seconds of each video clip with a version that is boated but faster to load, but back that up with an asset that is encoded in H.264. Use an AVQueuePlayer, and add the first 10 seconds in the uncompressed file format, and follow that up with one that is in H.264 which gets up to 10 seconds of prepare/preload time. So I'd get 'the best' of both worlds: fast start times, but also benefits from a more compact format. Idea 6: Use a non-standard AVPlayer / write my own / use someone else's Given my needs, maybe I can't use AVPlayer, but have to resort to AVAssetReader, and decode the first few seconds (possibly write raw file to disk), and when it comes to playback, make use of the raw format to play it back fast. Seems like a huge project to me, and if I go about it in a naive way, it's unclear / unlikely to even work better. Each decoded and uncompressed video frame is 2.25 MB. Naively speaking -- if we go with ~ 30 fps for the video, I'd end up with ~60 MB/s read-from-disk requirement, which is probably impossible / pushing it. Obviously we'd have to do some level of image compression (perhaps native openGL/es compression formats via PVRTC)... but that's kind crazy. Maybe there is a library out there that I can use? Idea 7: Combine everything into a single movie asset, and seekToTime One idea that might be easier than some of the above, is to combine everything into a single movie, and use seekToTime. The thing is that we'd be jumping all around the place. Essentially random access into the movie. I think this may actually work out okay: avplayer-movie-playing-lag-in-ios5 Which approach do you think would be best? So far, I've not made that much progress in terms of reducing the lag.

  Read the article

• Why is HttpClient's GetStringAsync is unbelivable slow?

  - by Jason94

  I have a Windows Phone 8 project where I've taken to use the PCL (Portable Class Library) project too since I'm going to build a Win8 app to. However, while calling my api (in Azure) my HttpClient's GetStringAsync is so slow. I threw in a couple of debugs with datetime and GetStringAsync took like 14 seconds! And sometimes it takes longer. What I'm doing is retrieving simple JSON from my Azure API site. My Android client has no problem with getting that same data in a split second... so is there something I'm missing? The setup is pretty straight forward: HttpClient client = new HttpClient(); client.DefaultRequestHeaders.Accept.Add(new MediaTypeWithQualityHeaderValue("application/json")); client.DefaultRequestHeaders.Add("X-Token", "something"); string responseJSON = await client.GetStringAsync("url"); I've places the debug times right before and after the await there, in between it is 14 seconds! Does someone know why?

  Read the article

• What does WIX's CloseApplication functionality do and how would can the application respond to such

  - by tronda

  In the WIX setup I've got, when upgrading the application I have set a requirement to close down applications which might hold on to files which needs to be updated: <util:CloseApplication Id="CloseMyApp" Target="[MyAppExe]" CloseMessage="no" Description="!(loc.MyAppStillRunning)" RebootPrompt="no" ElevatedCloseMessage="no" /> The application on the other hand will capture closing down the window with a "user friendly" dialog box where the user can confirm that he or she wants to close down the application. I've experienced problems with the CloseApplication, and one theory is that the dialog box stops the application from closing. So the question is: Could this be a possible problem? If so - how can I have this confirmation dialog box and still behave properly when the installer asks the application to close down? Must I listen to Win32 messages (such as WM_QUIT/WM_CLOSE) or is there a .NET API which I can use to respond properly to these events?

  Read the article

• fftw in Visual Studio?

  - by drhorrible

  I'm trying to link my project with fftw and so far, I've gotten it to compile, but not link. As the site said, I generated all the .lib files (even though I'm only using double precision), and copied them to C:\Program Files\Microsoft Visual Studio 9.0\VC\lib, the .h file to C:\Program Files\Microsoft Visual Studio 9.0\VC\include and the .dll to C:\windows\system32. I've copied the tutorial program, and the exact error I am getting is: 1>hw10.obj : error LNK2019: unresolved external symbol __imp__fftw_free referenced in function "bool __cdecl test(void)" (?test@@YA_NXZ) 1>hw10.obj : error LNK2019: unresolved external symbol __imp__fftw_destroy_plan referenced in function "bool __cdecl test(void)" (?test@@YA_NXZ) 1>hw10.obj : error LNK2019: unresolved external symbol __imp__fftw_execute referenced in function "bool __cdecl test(void)" (?test@@YA_NXZ) 1>hw10.obj : error LNK2019: unresolved external symbol __imp__fftw_plan_dft_1d referenced in function "bool __cdecl test(void)" (?test@@YA_NXZ) 1>hw10.obj : error LNK2019: unresolved external symbol __imp__fftw_malloc referenced in function "bool __cdecl test(void)" (?test@@YA_NXZ) So, what could be wrong with my project setup? Thanks!

  Read the article

• Visual Studio 2010, TlbImp generates .net 4.0 interops in 2.0 projects

  - by DJScrib

  In a C# project we add a reference to a COM object via the Add References setup pointing to a COM object which results in the IDE auto-generating the interop assembly. So this is fine and good, but we are building based on .net 3.5 SP1 aka CLR 2.0, and the generated interops are using the 4.0 CLR making them incompatible. Is there a way to prevent this? I assume the other option is configure our build script to try using tlbimp.exe with the /references parameter? to point to mscorlib v2.0? Anyhow, I'm hoping there's a flag somewhere to allow this.

  Read the article

• SAP DCOM Connector on Windows Server 2008

  - by Michael

  Does anybody know, if it is possible to use the "old" SAP DCOM Connector on a Windows Server 2008 ? I want to migrate a old ASP Web Solution with DCOM Connection to SAP from Windows 2000 Server to Windows 2008 Server. When I try to install the DCOM Connector I get the Error Message: "Setup could not find ActivX(R) Data Objects verion 2.5 or higher on your computer...." That is strange, because ado is there under C:\Program Files\Common Files\System\ado ! Thanks in advance for your help !

  Read the article

• Selenium RC 403 Error - Forbidden for proxy

  - by FarmBoy

  I'm trying to run Selenium RC 1.0.3 using Java 6, JUnit 4, and Eclipse on Snow Leopard. Here is my test class, from the Selenium docs: public class TestCase extends SeleneseTestCase { @Before public void before() throws Exception { setUp("http://www.google.com/", "*firefox"); } @Test public void test() { selenium.open("/"); selenium.type("q", "selenium rc"); selenium.click("btnG"); selenium.waitForPageToLoad("30000"); assertTrue(selenium.isTextPresent("Advanced search")); } } I've tried (finding various suggestions on the web) replacing *firefox with *chrome or *firefox, replacing http with https and adding selenium.start(), but none have helped, or even changed the behavior. Any ideas?

  Read the article

• Add Hyperlink to Cell in Excel 2007 Using Open XML SDK 2.0

  - by amurra

  I can't seem to find any documentation or code samples on how to add a hyperlink to a cell in Excel 2007 using the open xml sdk 2.0. I am using the following code, but is there a step I am missing? WorksheetPart workSheetPart = ExcelUtilities.GetWorkSheetPart(mWorkBookPart, "Program"); workSheetPart.AddHyperlinkRelationship(new Uri("http://www.google.com", UriKind.Absolute), true); workSheetPart.Worksheet.Save(); mWorkBookPart.Workbook.Save(); Then when I try and open the Excel document it says the file is corrupted because the relationship Id for the hyperlink cannot be found. How do you setup or create that relationship Id?

  Read the article

• How to achieve maximum callback throughput with WCF duplex channels

  - by Schneider

  I have setup a basic WCF client/server which are communicating via Named pipes. It is a duplex contract with a callback. After the client "subscribes", a thread on the server just invokes the callback as quickly as possible. The problem is I am only getting a throughput of 1000 callbacks per second. And the payload is only an integer! I need to get closer to 10,000. Everything is essentially running with default settings. What can I look at to improve things, or should I just drop WCF for some other technology? Thanks

  Read the article

• No attachable databases were found on the SQL Server

  - by George

  I'm fumbling my way through a basic installation of TFS 2010... I see that the TFS_Configuration and Tfs_DefaultCollection databases were successfully created on my local machine. The installation seemed to go smoothly, but it looks like I need to configure a Team Project Collect before I can start using it. Yet, the wizard seems unable to locate the appropriate database that I expected should have been created during the setup process. The server name defaulted properly to the name of the local machine. Did I miss a step somewhere?

  Read the article

• Ruby on Rails deployment, on "thin" server with lot of attachments

  - by Horace Ho

  A lot of PDFs are stored inside MySQL as a BLOB field for each PDF file. The average file size is 500K each. The Rails app will stream the :binary data as file downloads, where there is a user click on the download link. Assume there is a maximum of 5 users downloading 5 PDFs concurrently, what kind of deployment setup parameters I should be aware of? e.g. for the case of thin: thin start --servers 3 whether --servers 3 is good enough (or 5 or more is needed) for the above example? The 2nd question is whether 'thin' a capable solution? Thanks!

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >