Search Results

Search found 11543 results on 462 pages for 'partition wise join'.

Page 389/462 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• A Windows Update Prevented Live Discs From Working? [migrated]

  - by user88311

  First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

  Read the article

• 12.04 Booting into Terminal

  - by user170796

  To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

  Read the article

• Help understanding my hard drive / partitioning situation... Pictures Included! :)

  - by xopenex

  So I have installed windows 7, and two different distros of linux... I have read and tried to understand things like "spanned" "extended" "primary" "swap" "dev/dev2/" "GRUB" "Windows Boot Loader/Manager" etc.... I have a very very limited understanding of all of it! :) I am trying to figure out how to get all OS boot options on one Boot manager (I'm thinking it will be GRUB), because at this point when i turn on my computer, I basically get two booting options (excluding the memtest options etc)... One options is to boot one of my Linux Distros and the second option is to boot my Windows 7. When i go with the first option, Linux boots up... when i go with the second Windows 7 option, I get the "windows boot manager screen" and I can choose Windows 7 or my other installation of Linux (Ubuntu)... In addition, I did not have swap partition from my first installation of Linux, I created it during the installation of my second distro... This is a lot of info for me, but I'm guessing that you linux Gurus, pretty much understand what is going on! Hope my question makes sense.. i will try and simplify... Can i get all 3 OS's optioned to boot from one GRUB? Can i get both Linux distros to use one swap file (I have seen this possible in other threads, but because of how my disk is partitioned, i dont know if i can do this) I hope that i dont have to start all over installing one after the other. Ive got some pics that may help understand my hard drive situation! Thanks guys! :) EDIT... i had some pics, but im a new member.. so cant post them... :( here is a description of the pics... incase i can email them or post later. [grub][3] First Screen I come to after turning on computer... "Ubuntu with linux 3.2.6" (highlighted) fires up Linux perfectly... other choice at bottom of list "Windows 7 (loader) (on dev/sda1)... brings me to the next picture below.. windows boot manager [win boot mngr][6] both options here load the os selected [Disk Manager Windows][1] picture of my hard drive situation through windows disk manager utility [gparted][2] picture of my hard drive situation through "gparted" [mycomp][4] picture of my hard drive situation through "my computer" [paragon][5] one last pic of my hard drive situation through the eyes of "paragon"

  Read the article

• Basic Android game loop having issues

  - by WillDaBeast509

  I've set up a very basic game loop that should draw a circle, run 100 times, then draw another. I also have a text field that should display how many times the loop has ran. However, the screen seems to not update. It displays a different value for the tick count (different each time the app is ran) and simply stays there. After exiting the app, I get an error saying "Unfortunately, MyApp has stopped." Here is the relevant code: DrawView public class DrawView extends SurfaceView implements SurfaceHolder.Callback { Paint p = new Paint(); MainThread thread; private int y=0; public DrawView(Context c) { super(c); thread = new MainThread(this, getHolder()); thread.running = true; getHolder().addCallback(this); setFocusable(true); } public void draw(Canvas c) { if(c==null) return; //super.onDraw(c); c.drawColor(Color.WHITE); p.setColor(Color.RED); p.setTextSize(32); p.setTypeface(Typeface.SANS_SERIF); c.drawCircle(getWidth()/2-100,getHeight()/2, 50, p); c.drawText("y = " + y, 50, 50, p); if(y>=100) { Log.i("DRAW", "drawing circle"); c.drawCircle(getWidth()/2+100,getHeight()/2, 50, p); } else y++; Log.i("INFO", "y = " + y); } @Override public boolean onTouchEvent(MotionEvent event) { return true; } public void onDraw(Canvas c){} public void surfaceCreated(SurfaceHolder p1) { thread.start(); } public void surfaceChanged(SurfaceHolder p1, int p2, int p3, int p4) { // TODO: Implement this method } public void surfaceDestroyed(SurfaceHolder p1) { thread.running = false; boolean retry = true; while (retry) { try { thread.join(); retry = false; } catch (InterruptedException e) { Log.i("EX", "cathing exception"); } } } } MainThread public class MainThread extends Thread { private DrawView page; private SurfaceHolder holder; public boolean running; public MainThread(DrawView p, SurfaceHolder h) { super(); page = p; holder = h; } @Override public void run() { while(running) { Canvas c = holder.lockCanvas(); page.draw(c); holder.unlockCanvasAndPost(c); } } } Here is an example log outupt: http://pastebin.com/tM9dUPuk It counts the number of ticks correctly and should draw the second circle, but the screen looks like its not updating. After closing the app, the log continues to run and keep outputting "y = 100 drawing circle" until it crashes and shows the error report. What is going on and how can I fix these two problems?

  Read the article

• What is the right way to group this project into classes?

  - by sigil

  I originally asked this on SO, where it was closed and recommended that I ask it here instead. I'm trying to figure out how to group all the functions necessary for my project into classes. The goal of the project is to execute the following process: Get the user's FTP credentials (username & password). Check to make sure the credentials establish a valid connection to the FTP server. Query several Sharepoint lists and join the results of those queries to create a list of items that need to have action taken on them. Each item in the list has a folder. For each item: Zip the contents of the folder. Upload the folder to the FTP server using SFTP Update the item's Sharepoint data. Email the user an Excel report showing, e.g., Items without folder paths Items that failed to zip or upload Steps 2-5 are performed on a periodic basis; if step 2 returns an invalid connection, the user is alerted and the process returns to step 1. If at any point the user presses a certain key, the process terminates. I've defined the following set of classes, each of which is in its own .cs file: SFTP: file transfer processes DataHandler: Sharepoint data retrieval/querying/updating processes. Also makes and uploads the zip files. Exceptions: Not just one class, this is the .cs file where I have all of my exception classes. Report: Builds and sends the report. Program: The main class for running the program. I recognize that the DataHandler class is a god object, but I don't have a good idea of how to refactor it. I feel like it should be more fine-grained than just breaking it into Sharepoint, Zip, and Upload, but maybe that's it. Also, I haven't yet worked out how to combine the periodic behavior with the "wait for user input at any point in the process" part; I think that involves threads, which means other classes to manage the threads... I'm not that well-versed in design patterns, but is there one that fits this project well? If this is too big of a topic to neatly explain in an SO answer, I'll also accept a link to a good tutorial on what I'm trying to do here.

  Read the article

• laptop will not boot after attempting upgrade to 13.10

  - by naerwenya

  I wanted to update my OS to the new 14.04 LTS. I was running 12.04 LTS before and followed the advice that upgrades should be done in steps. I first upgraded to 12.10, which seemed to work fine, and later to 13.10. This was all done through the Software Manager. After the last upgrade, I am no longer able to boot up my computer. The GNU GRUB menu opens up, but after selecting Ubuntu, it just stalls with a blank purple screen. If I select one of the other kernels, it also stalls after "Loading initial ramdisk...". I can't get into the Recovery Menu, either. I'm still rather new to Linux and may have possibly made the situation worse. Unfortunately, nothing has worked yet. I tried reinstalling from a flash drive and on my first attempt, the wizard recognised a previous installation. Unfortunately, the wizard also didn't like how my partitions were set up (I didn't change anything) and gave an error before closing. Unfortunately, I didn't write the error down, but it was about the boot partition. On the next attempt and ever since, the installation wizard has stated that "This computer currently has no detected operating systems." This is strange, because I could see the disk and even access my files when booting up from the USB. At this point, I decided to back up my important files using dropbox. Before losing all my files, I wanted to try the Boot-Repair tool, which also produced no results, and the files are no longer visible when booting from USB. The link to the Boot-Repair log is at http://paste.ubuntu.com/7457249/. If I then proceed through to the "Something else" installation option, I can see that the partitions still exist. This is what they look like: /dev/sda free space (size indicated 1MB) /dev/sda1 efi (33MB of 98 MB used) /dev/sda2 efi (352634MB of 746330MB used) /dev/sda3 swap (3725MB, none used) free space (0MB) Is there any way I might be able to get my computer to work and preserve my files as well?

  Read the article

• ??????????????? -Oracle ACE ????????

  - by OTN-J Master

  ??????????????????????Oracle ACE??2014?6???????Oracle ACE?15????????Oracle ACE??????????????????????????????????? ????????????OK???·?????????????????????? Oracle ACE???????Oracle ACE?????????? (OTN??????) OTN ????????Oracle ACE???????????????¦?? ???????????????????????????????????????????????????????????????????????????????????????????????????????????????????? Japan Oracle User Group (JPOUG) ??????????????9?????????????????????????????????Oracle Database 12c?????????????????????????????????????????????????????AWS??????????????????????????????????????????????????????????????????????????????????????????????????JPOUG ???????????????????????????????????????????????????????????????Blog??????????????Oracle ACE??????????Oracle ACE??????????????????????????????????Oracle ACE?????(http://www.oracle.com/technetwork/jp/community/index-098108-ja.html)??????????????????????????????????????????????????????????????????????????????????????????????????????????????(JPOUG)????????Web???Blog????????????????¦?? ???????Oracle9i SE??Oracle11g EE(RAC????)??????????????????????????????????????????????????(?)Oracle Exadata????????????????(???????????????”???”????????????????)?Oracle Database 12c?Adaptive Plan?????Adaptive Join Method??????????????????????????5????SQL???10???????????????????????????????????????????????????????????????????Adaptive plan????????????????????Oracle ACE??????????JPOUG (Japan Oracle Users Group)??????Blog???????????????????????????????????????????Oracle ACE??????????Oracle ACE??????Blog??????????????????????(?????????????????????????????????????)?????????????????????????????????????????Oracle ACE??????????????????????????????????????????????????????????????¦?? ?????????WebLogic Server ??????? Oracle Fusion Middleware ??????????????????Oracle ACE ????????WebLogic Server ??????????????JJUG (??Java????????) ???????????????????Java SE 8 ????????????????????????????????????? Lambda ????????????????????????? WebLogic Server ?????????????????????????????????????Oracle ACE??????????ACE Associate ?????????????????????????????????????????????????????? ACE ?????????(?)??? Normal 0 0 2 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0mm 5.4pt 0mm 5.4pt; mso-para-margin:0mm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.5pt; mso-bidi-font-size:11.0pt; font-family:"Century","serif"; mso-ascii-font-family:Century; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Century; mso-hansi-theme-font:minor-latin; mso-font-kerning:1.0pt;}  

  Read the article

• PowerShell Import DnsShell Module

  - by krousemw

  So here's the list of available modules in this directory. As you can see DnsShell is there. PS C:\windows\system32> Get-Module -ListAvailable Directory: C:\windows\system32\WindowsPowerShell\v1.0\Modules ModuleType Name ExportedCommands ---------- ---- ---------------- Manifest ActiveDirectory {Get-ADRootDSE, New-ADObject, Rename- ADObject, Move-ADObject...} Manifest AppLocker {Set-AppLockerPolicy, Get-AppLockerPolicy, Test-AppLockerPolicy, Get-AppLo... Manifest BitsTransfer {Add-BitsFile, Remove-BitsTransfer, Complete-BitsTransfer, Get-BitsTransfe... Manifest CimCmdlets {Get-CimAssociatedInstance, Get-CimClass, Get-CimInstance, Get-CimSession...} Binary DnsShell Script ISE {New-IseSnippet, Import-IseSnippet, Get- IseSnippet} Manifest Microsoft.PowerShell.Diagnostics {Get-WinEvent, Get-Counter, Import-Counter, Export-Counter...} Manifest Microsoft.PowerShell.Host {Start-Transcript, Stop-Transcript} Manifest Microsoft.PowerShell.Management {Add-Content, Clear-Content, Clear- ItemProperty, Join-Path...} Manifest Microsoft.PowerShell.Security {Get-Acl, Set-Acl, Get-PfxCertificate, Get-Credential...} Manifest Microsoft.PowerShell.Utility {Format-List, Format-Custom, Format-Table, Format-Wide...} Manifest Microsoft.WSMan.Management {Disable-WSManCredSSP, Enable- WSManCredSSP, Get-WSManCredSSP, Set-WSManQui... Script PSDiagnostics {Disable-PSTrace, Disable- PSWSManCombinedTrace, Disable-WSManTrace, Enable... Binary PSScheduledJob {New-JobTrigger, Add-JobTrigger, Remove-JobTrigger, Get-JobTrigger...} Manifest PSWorkflow {New-PSWorkflowExecutionOption, New-PSWorkflowSession, nwsn} Manifest PSWorkflowUtility Invoke-AsWorkflow Manifest TroubleshootingPack {Get-TroubleshootingPack, Invoke-TroubleshootingPack} When I run the command to Import-Module DnsShell, I get this error and I dont know why.. PS C:\windows\system32> Import-Module DnsShell Import-Module : Could not load file or assembly 'file:///C:\windows\system32\WindowsPowerShell\v1.0\Modules\DnsShell\DnsShell.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) At line:1 char:1 + Import-Module DnsShell + ~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : NotSpecified: (:) [Import-Module], FileLoadException + FullyQualifiedErrorId : System.IO.FileLoadException,Microsoft.PowerShell.Commands.ImportModuleCommand Note: I would have posted pictures but I needed a rep of at least 10 in serverfault

  Read the article

• Reinstall Acer OEM Windows 8, Windows 8 Recovery for Acer Aspire V5 122p

  - by stwindr

  My Acer Aspire V5-122P-61456G50NSS, model - MS2377, has crashed all together. It came preloaded with Windows 8 and I upgraded to windows 8.1 3-4 days before crash. Unfortunately I did not make any recovery media before the crash. While accessing the eRecovery on Acer store with my PC's serial no. it says nor RCD available for this. I tried recovery by loading recovery manager (Left Alt + F10) Various other advanced startup options (like holding shift key while turning on or pressing F8 key) returns nothing but no luck. However I am able to enter BIOS. After doing research on above condition on various PC forums, now my questions: I read that a 'Windows Recovery Drive' can be made on any PC running Windows 8 and could be used to repair another PC. Does anybody in SuperUser community have that (or a link to download the same from somewhere? as I'm unable to find anybody running windows 8 among my friends). I downloaded a window 8 Pro ISO and made a bootable USB. I was able to go to 'Repair Your Computer' option and after going to 'Reset your PC' option found that my recovery partition has gone/missing. I tried all options available but no luck. Then I tried to install with that Windows 8 Pro ISO but got message: "The product key entered does not match any of the Windows images available for installation. Enter a different product key". before this message I did not got any form to fill product key! Does this mean that the installer was picking up the key from BIOS (OEM Key)? and may be the installation did not succeeded because OEM Windows version was Window 8 and I was trying to install Windows 8 Pro. If that is the case then, could somebody please send me link to download an Windows 8 ISO? I am helpless and couldn't find anywhere on internet (without having to pay for a new key, but I should not pay as the installer will use OEM key).

  Read the article

• How to make my SanDisk Cruzer Blade 4GB disk back to normal?

  - by Jack

  Currently, my SanDisk Cruzer Blade 4GB have become a 64MB Firebird RAW flash drive (thumb drive). I don't know why it become like this but when I plug it into a PC, it suddenly transform itself to become a 64MB flash drive. (From 4 GB to 64 MB, that is a huge change!) I read the following articles: http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/Cruzer-Blade-will-not-format/td-p/214932 http://forums.whirlpool.net.au/archive/1691847 http://forum.hddguru.com/sandiskfirebird-64mb-t23539.html and notice that their solutions does not work at all. Some of their solution is as follows: Using the HP USB Disk Storage Format Tool (http://files.extremeoverclocking.com/file.php?f=1970), which did not work for me as it could not format. Using the h2testw to see if it is genuine, which did not work for me because it is a RAW partition. Return to the vendor, which I doubt since the product only have 1 year warranty and it has expired. I also notice that the flash drive is very fragile as after a few use, the flash drive have become something like the following: (The upper cover of the USB connector was broken or torn) So, wondering if someone have any good solution to fix it back so that at least I can retrieve my data on the fragile thumb drive.

  Read the article

• Mounting an Azure blob container in a Linux VM Role

  - by djechelon

  I previously asked a question about this topic but now I prefer to rewrite it from scratch because I was very confused back then. I currently have a Linux XS VM Role in Azure. I basically want to create a self-managed and evoluted hosting service using VMs rather than Azure's more-expensive Web Roles. I also want to take advantage of load balancing (between VM Roles) and geo-replication (of Storage Roles), making sure that the "web files" of customers are located in a defined and manageable place. One way I found to "mount" a drive in Linux VM is described here and involves mounting a VHD onto the virtual machine. From what I could learn, the VHD is reliably-stored in a storage role, and is exclusively locked by the VM that uses it. Once the VM Role has its drive I can format the partition to any size I want. I don't want that!! I would like each hosted site to have its own blob directory, then each replicated/load-balanced VM Role to rw mount like in NFS that blob directory to read HTML and script files. The database is obviously courtesy of Microsoft :) My question is Is it possible to actually mount a blob storage into a directory in the Linux FS? Is it possible in Windows Server 2008?

  Read the article

• Linked server problem on SQL Server 2005

  - by BradyKelly

  I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

  Read the article

• Domain Trust Issues When Setting Up TFS 2010 on Windows Server 2008 R2

  - by Chris Reynolds

  I am trying to setup Team Foundation Server 2010 on Windows Server 2008 R2 using a single server configuration. During the "Readiness Checks" phase of the configuration wizard, I am facing an issue that i preventing me from communicating with the domain controller (which is Windows Server 2000). [ System Checks ] TF255435: This computer is a member of an Active Directory domain, but the domain controllers are not accessible. Network problems might be preventing access to the domain. Verify that the network is operational, and then retry the readiness checks. Other options include configuring Team Foundation Server specifying a local account in the custom wizard or joining the computer to a workgroup. http://go.microsoft.com/fwlink/?LinkID=164053&clcid=0x409 After reading the log file, the main issue I am encountering appears to be: The trust relationship between this workstation and the primary domain failed. (type SystemException) I have read in several other locations that the solution to this issue is to: Leave the domain Restart Join a workgroup Restart Rejoin the domain Unfortunately, I have tried this several times now and the issue persists. Is there anything I can try on the either the client machine or the domain controller that may help solve my issue?

  Read the article

• Windows Server Backup fails to backup Hyper-V VM with "Access is denied"

  - by Sebastian Krysmanski

  I'm trying to use Windows Server Backup on my Windows Server 2012 box to backup my Hyper-V VMs. I created a backup job but each job ends with some "Access is denied" errors. One of my VMs (Linux Server) is backed up properly. All others (one Windows 8, one Linux) are not (or at least it seems that way from the looks of the log file below). How can I solve this problem? Here's the log I'm getting: Error in backup of D:\ during read: Error [0x80070005] Access is denied. Application backup Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: C435964E-C07A-4958-BA73-A04C6583280F Caption : Backup Using Saved State\Alter Server Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: E780F138-9676-42FB-821C-4561B9B263DC Caption : Backup Using Child Partition Snapshot\Windows 8 Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: Host Component Caption : Host Component Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null)

  Read the article

• Can't Access TFS 2010 Beta 2 from Visual Studio 2010 Beta 2 when domain joined

  - by Brian Sullivan

  I'm experimenting with an installation of TFS 2010 Beta 2 on a virtual machine under VirtualBox running Windows Server 2008. When I've got the server in a workgroup, I can connect to it from Visual Studio just fine, as long as I provide credentials for a local user on the server machine when prompted by the "Connect to Team Foundation Server" dialog. The desktop I'm running Visual Studio on is joined to a domain. However, when I join the server to the domain, I can no longer connect to it from Visual Studio. I get a pretty generic error message: "TF31002 - Unable to connect to team foundation server". It gives me several different possible problems, including an incorrect address or an incorrect username and password. I've already added the domain Windows identity with which I'm logged on the the desktop to the TFS Admins group on the server, so I don't think it's a username/password problem. I've also tried putting the literal IP address of the server in the dialog address box instead of the machine name, but still no dice. I made sure that network discovery was enabled on the server, too, and can navigate to "\\webserver2008" in Windows Explorer without any problems. Shouldn't be a firewall problem, since the TFS install creates the appropriate exceptions in Windows Firewall. It's all a bit confusing, since it seems to work when the server is in a workgroup. Note: I'm a dev, not an admin, so there are many subtleties of server administration with which I'm not familiar. Please make no assumptions about what I may or may not have tried; what may be obvious to you may have never occurred to me. Thanks in advance!

  Read the article

• linux LVM mirror vs. MD mirror

  - by sims

  I think I remember making some mirrors years ago with LVM, and I don't remember this "log" thing. Or maybe I made the mirror with mdadm and put LVM on top. That must be it. What is the LVM log for if it is just a mirror? What is stored there? What is it's purpose? Is using "--mirrorlog core" bad? What's the down side? I don't want to have to have another partition for logs if I don't have to. Any recommendations on using either technology? Even if I make the mirror with mdadm, I'll use LVM on top of that. So, in that case, maybe it's better to have the whole setup built with LVM...? Would that take more a performance hit or less? The disks are for storing Xen domU "disks". Sorry for the complex not-to-the-point "question". Ideas and suggestions and links are most welcome. Thanks!

  Read the article

• Problem running Apache-Tomcat on every web browser installed in Windows 7

  - by Kush

  Hello everyone, I'm working on a web application in JSP and my web container is Apache Tomcat 7.0.2 (Its portable cross-platform version). As I've made extensive use of HTML5-CSS3 and my target browser is Google Chrome, I'm able to run the the Apache server only in Opera web browser, neither of the remaining installed browser run it. Here's the steps I have followed to start the server in my Windows 7 machine. -Placing the 'apache-tomcat-7.0.2' directory on my root partition (i.e. C: Drive) -Execute 'startup.bat' from 'bin' directory in it. (startup.sh if on Linux/Unix). -Then, a Console window opens that shows log during the setup of server (separately from Command Prompt), and I need to keep that console running in order to keep the Apache server running, so I minimize it. -Then, I open 'http://localhost:8080/' in various web browsers, and I could see Apache Server Homepage with same address only in Opera Web Browser (11.01), neither of other browsers installed can open it (Chrome 9, Firefox 4 Beta 10 or IE8). -I also tried other port numbers, but none of them worked. What can I do to make Apache run in every browser installed in my computer? I have my computer dual boot with Windows 7 and Ubuntu 10.10, and in Ubuntu, every web browser installed can run Apache once I start it, but same is not working in Windows.

  Read the article

• Megacli is killing me, any help appreciated

  - by Stefan

  I run a server with 2 drives in raid0 configured through BIOS. I just added 2 more drives using hotplug (the server is dell r610 with RHEL 5.4 64bit) and I would like to configure a separate raid0 partition on these drives. I am getting the following error: /opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd r0[32:2, 32:3] -a0 The specified physical disk does not have the appropriate attributes to complete the requested command. Exit Code: 0x26 All the parameters are correct and there is just no reason why this command could not work, see this (fujitsu is current raid, seagate is the new one I want to create): /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL | egrep 'Adapter|Enclosure|Slot|Inquiry' Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA101174 Enclosure Device ID: 32 Slot Number: 1 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA10115T Enclosure Device ID: 32 Slot Number: 2 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS033SE0TF5K Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS023SE070FK I also tried to set up the drive as hotspare, also some strange error: /opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set -physdrv[32:3] -a0 Adapter: 0: Set Physical Drive at EnclId-32 SlotId-3 as Hot Spare Failed. FW error description: The specified device is in a state that doesn't support the requested command. Exit Code: 0x32 As you can see the disk is in Unconfigured, Good state: Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Device Id: 3 Sequence Number: 1 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.875 GB [0x22dc0000 Sectors] Firmware state: Unconfigured(good), Spun Up SAS Address(0): 0x5000c50005cd20b1 SAS Address(1): 0x0 Connected Port Number: 3(path0) Inquiry Data: SEAGATE ST9300603SS FS023SE070FK FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: Foreign Foreign Secure: Drive is not secured by a foreign lock key Device Speed: Unknown Link Speed: Unknown Media Type: Hard Disk Device Drive Temperature :30C (86.00 F)

  Read the article

• RAID-1 and regular drive removal (using RAID-1 as a backup measure)

  - by Vi

  Is using mdadm's RAID-1 of 2 partitions (one on laptop's internal HDD, one on external HDD) a good idea. I want the system to work as RAID-1 if both drives are present, work as regular volume (degradad RAID-1) if external HDD is unplugged and quickly resync when I plug external HDD again. Questions: Is it a good idea? Will write-intent bitmap be enough for this task or I need something else? Should I consider doing it at filesystem level (3b. if yes, how?). Basic requirements are: Quick resync when I re-add the external drive (provided I hasn't changed that partition). More or less consistent data on the removed drive if I remove it not during write/resync operation. If I remove the drive during resync I expect the data to be somewhat inconsistent, but expect quick resync completion when I re-add it again. E.g. I want the the remaining drive to track what is changed (there can be a lot of changes) and that sync back only those parts that need it.

  Read the article

• Disable raid member check upon mount to mount damaged nvidia raid1 member

  - by Halfgaar

  Hi, A friend of mine destroyed his Nvidia RAID1 array somehow and in trying to fix it, he ended up with a non-working array. Because of the RAID metadata, the actual disk data was stored at an offset from the beginning. I was able to identify this offset with dd and a hexeditor and then I used losetup to create a loop device with the proper offset, so that I could mount the partition. It was then that I ran into problems, namely that mount says: "mount: unknown filesystem type 'nvidia_raid_member'". I also had this when trying to mount a Linux MD component the other day, and because I can remember that doing that in the past worked, I surmised that it may be some kind of protection. I therefore booted an old Sysrescue CD and tried it there, which worked (because of the older version of mount/libc/kernel/whatever). I still need to try to get more data, and because I don't want to keep using that SysrecueCD, I'd like to be able to mount the disk on my normal system. So, my question is: can the check for a disk being a raid member be disabled? I guess I could also zero out blocks that look like the raid block, but I'd rather not... I made an image of the disk with par2 data, so it's revertable, but still...

  Read the article

• What is there in Win 7 Pro (or Ultimate) that is not there in Home Premium? - Especially considering this situation..

  - by Senthil

  I want to know the REAL difference between Windows 7 Home Premium and Professional/Utimate. In India, the cost of different versions: Ultimate - 11,200 INR Professional - 10,700 INR Home Premium - 6,600 INR The absolute cost of the first two is so high to me that the difference (500 INR) doesn't matter. So to me there is really no choice between the first two - If I decide to buy the Professional version, I'd rather go for Ultimate itself. What I want to know is, whether Home Premium is enough for my needs. I tried searching for comparison but many look like just marketing junk from MS. They are short and vague. According to this page, the major differences between Pro and HomePremium are Run many Windows XP productivity programs in Windows XP Mode. Connect to company networks easily and more securely with Domain Join. You can do both in Pro but not in Home Premium. I intend to use my Windows 7 for a small business - just starting up. So I'll be dealing with the following: All kinds of development tools, servers Very important - I will run Virtual Machine Software (MS VPC or VMWare or Sun VirtualBox etc..) My system will be acting as the server for most purposes till I can afford dedicated servers. Connect the system to a variety of network devices (PCs, Printers, etc..) Run productivity, business and financial apps Any other small software startup business requirement that I haven't thought of yet. Professional (and Ultimate) is twice as expensive as Home Premium. So it'd be great if someone can point out the things you cannot do with Home Premium, when you use it like I explained above, so that I can make a decision about which one to buy. I need some real-life experiences so that I can make an informed decision - not a decision based on marketing junk.

  Read the article

• How to actually defragment a JFFS2 filesystem

  - by Julie in Austin

  I have searched all over the Internet, including on a number of StackExchange forums, for a workable method for defragmenting a JFFS2 filesystem and cannot find an answer. The system in question has a 256MB NAND flash part. It is being accessed as a MTD device which is divided into three partitions. The third partition is where the root file system is being stored as a JFFS2 file system. The issue is that writes to the root file system have non-deterministic performance due to the usual issues of the JFFS2 garbage collector deciding to run at the worst possible times. When that happens, the product is hung for some unknown length of time while the garbage collector (and pdflush) run. Changing the file system isn't an option. The solution needs to be something that can run during off-hours that after having been run results in more predictable write performance. Right now I am working on a program that will attempt to force the garbage collector to run, then delete the file with the hope that all of the freed nodes are suddenly more readily available and make writes perform better. Thoughts?

  Read the article

• Vagrant synced folders aren't case sensitive

  - by lvmisooners

  For our web stack, we are moving from a Windows Server to CentOS. To facilitate development, we're utilizing Vagrant to run CentOS VMs locally. We're using Vagrant's Synced Folders feature to allow devs to use their favorite IDEs on their host machine, but we're finding that one key feature is missing from this setup: file system case sensitivity. The synced folder inside the VM apparently takes on the properties of the host's file system, so if I'm developing from a Windows machine, or even OSX, the file system isn't case sensitive. This is a big issue, as our production servers will be pure CentOS, and its file system will be case sensitive. Case sensitivity is one of the main reasons we wanted to have a local VM. We want to prevent "It works on my machine!" Some workarounds we've considered or tried: Use lsyncd to sync from the vagrant share to a location within the VM that is case sensitive updating files on the host doesn't seem to generate the events in the VM that lsync listens to Make a case-sensitive partition on the host (Doesn't work for Windows) Use samba this may be an option, but we haven't vetted it yet. Is there a better way? Note that we have developers using Windows, OS X, and Ubuntu, and the solution needs to work everywhere.

  Read the article

• New Dell PE R710 - Storage Question

  - by rihatum

  Hi All, Dell PE R710, received from Dell in the following state : Windows Disk 0 1800GB ( Volume C & D ) Windows Disk 1 526 GB (Volume E ) Perc6i Integrated Raid Controller 6 x 500GB Nearline SAS 7200RPM HDDs Raid 5 Configuration with two Virtual Disks I have installed Dell open Manage and it shows the following : Virtual Disk 0 - State : Background Initialization ( 7% ) Virtual Disk 1 - State : Background Initialization ( 25% ) Now when I click on Virtual Disk 0 it shows me all 6 Disks and the same happens when I click on Virtual Disk 1 it displays all 6 disks. But when I click on Storage Perc6i Connector 0 I get 4 Physical disks with the following numbers : Physical Disk 0:0:0 Physical Disk 0:0:1 Physical Disk 0:0:2 Physical Disk 0:0:3 When I click on Storage Perc6i Connector 1 I get 2 Physical Disks Listed in the following way : Physical Disk 1:0:4 Physical Disk 1:0:5 I am a little confused in this description, does this 1:0:4 interprets to Controller1, Disk4. Does this integrated raid card have two controllers coming out of it ? Also, When I first switched on the machine, the boot partition was showing 1GB Available out of 40GB, now its showing 38GB available out of 40GB. Is this because the Virtual Disks are still Initializing ? Any recommendations or suggestions ? Also, this server have 6 x 500GB NearLine SAS Hard drives, what would be a good raid config ? We are planning to use it for Hyper-V with quite a few (7 or 8) virtual servers, your suggestions would be helpful. Also, while the virtual disks are in a initialization state, can I destroy and re-create the raid configuration ? I would have to do it at the BIOS CTRL-M ? Thanks and Regards

  Read the article

• Can I subnet a subnet?

  - by Portman

  Apologies in advance for the botched terminology. I have read the Server Fault Subnet Wiki but this is more of an ISP question. I currently have a /27 block of public IPs. I use give my router the first address in this pool and then use 1-to-1 NAT for all the servers behind the firewall, so that they each get their own public IP. The router/firewall is currently using (actual addresses removed to protect the guilty): IP Address: XXX.XXX.XXX.164 Subnet mask: 255.255.255.224 Gateway: XXX.XXX.XXX.161 What I would like to do is break out my subnet into two separate /28 subnets. And do this in a way that is transparent to the ISP (i.e., they see me as continuing to operate a single /27). Currently, my topology looks like: ISP | [Router/Firewall] | [Managed Ethernet Switch] / \ \ [Server1] [Server2] [Server3] (etc) Instead, I would like it to look like: ISP | [Switch] / \ [Router1] [Router2] | | | | [S1] [S2] [S3] [S4] (etc) As you can see, this would partition me into two separate networks. I'm struggling with what the correct IP settings would be on Router1 and Router2. Here's what I have right now: Router1 Router2 IP Address: XXX.XXX.XXX.164 XXX.XXX.XXX.180 Subnet mask: 255.255.255.240 255.255.255.240 Gateway: XXX.XXX.XXX.161 XXX.XXX.XXX.161 Note that normally you would expect Router2 to have a gateway of .177, but I'm trying to get them both to use the gateway originally given to me by the ISP. Is subnetting like this in fact possible, or am I completely botching the most basic concepts?

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >