Search Results

Search found 34939 results on 1398 pages for 'ubuntu 13 04'.

Page 389/1398 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• Can't (re)Install VLC (removed by update{again})

  - by David matthews

  I use VLC a lot, And When 2.0 came out Ubuntu did not update to that version, the REPO had the older version even months later, So I added the daily repo: http://ppa.launchpad.net/videolan/stable-daily/ubuntu and that worked for a while, after a few months later I received a 'Distribution upgrade' and when I installed it, it removed VLC. when I tried to re-install it gave me a bunch of unmet dependency's, so I disabled the source, ran apt-get update, and tried to install the older VLC, that did not work either. I eventually found a web page, and it helped me get it working, and I was also able to get the 'Stable Daily' working too But last night, I got another 'disto upgrade' and it uninstalled VLC again. when I try to reinstall from daily I get: The following packages have unmet dependencies: vlc : Depends: fonts-freefont-ttf but it is not installable Depends: vlc-nox (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed Recommends: vlc-plugin-pulse (= 2.0.3+git20121005+r392-0~r42~precise1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and from the default source: vlc : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed vlc-plugin-pulse : Depends: vlc-nox (= 2.0.3-0ubuntu0.12.04.1) but it is not going to be installed Depends: libvlccore5 (>= 2.0.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. (and yes, I ran apt-get update after turning off daily) Any Ideas? (ubuntu 12.04 64bit)

  Read the article

• Why doesn't lsof show localhost TCP connections in 14.04?

  - by sfussenegger

  I have two servers running 12.04.4 and 14.04.1 respectively. Both have nginx (port 80) and a Java process (port 8080). As expected, the lsof output for the Java process on the 12.04 machine shows a couple of established connections for port 8080 (e.g. TCP 127.0.0.1:8080->127.0.0.1:58067 (ESTABLISHED)) The 14.04 machine however does not. It only shows the listening port (TCP *:8080 (LISTEN)). I'm sure there are active connections though (confirmed by access logs, Java process status output, etc). What has changed from 12.04 to result in this behavior? Can this change be the cause for the "Too many open files" errors I'm getting since moving from 12.04 to 14.04? 12.04: $ dpkg -l lsof linux-image-virtual openjdk-7-jre nginx ||/ Name Version +++-===========================================-=========================================== ii linux-image-virtual 3.2.0.59.70 ii lsof 4.81.dfsg.1-1build1 ii nginx 1.6.1-1~precise ii openjdk-7-jre 7u65-2.5.1-4ubuntu1~0.12.04.1 14.04: $ dpkg -l lsof linux-image-virtual openjdk-7-jre nginx-full ||/ Name Version Architecture Description +++-=====================================-=======================-======================= ii linux-image-virtual 3.13.0.32.38 amd64 ii lsof 4.86+dfsg-1ubuntu2 amd64 ii nginx-full 1.4.6-1ubuntu3 amd64 ii openjdk-7-jre:amd64 7u65-2.5.1-4ubuntu1~0.1 amd64

  Read the article

• How can I fix my xvinfo?

  - by YumYumYum

  How can i fix my X server/driver? $ xvinfo X-Video Extension version 2.2 screen #0 no adaptors present Additional info: $ uname -a Linux desktop 2.6.32-33-generic #70-Ubuntu SMP Thu Jul 7 21:13:52 UTC 2011 x86_64 GNU/Linux $ lspci 00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 1503 (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4a (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 10) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) Follow up: It seems in 64-bit its a mess doing existing approach. Therefore, after upgrading to 12.04 64-bit this problems in same hardware is resolved (of-course, i have now other drivers problem)

  Read the article

• L2TP iptables port forward

  - by The_cobra666

  Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

  Read the article

• How to solve "403 Forbidden" on CentOS6 with SELinux Disabled?

  - by André

  I have a machine on Linode that is driving me crazy. Linode does not have SELinux on CentOS6... I'm trying to configure to put my website in "/home/websites/public_html/mysite.com/public" As I don´t have SELinux enable, how can I avoid the "403 Forbidden" that I get when trying to access the webpage? Sorry for my english. Best Regards, Update1, ERROR_LOG [Mon Oct 17 14:04:16 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 14:08:07 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 14:10:25 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 14:10:41 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 14:32:35 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 14:34:45 2011] [error] [client 58.218.199.227] (13)Permission denied: access to /proxy-1.php denied [Mon Oct 17 15:32:25 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 15:37:26 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 15:37:43 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 15:38:32 2011] [error] [client 127.0.0.1] (13)Permission denied: access to / denied [Mon Oct 17 15:42:56 2011] [crit] [client 127.0.0.1] (13)Permission denied: /home/websites/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable [Mon Oct 17 15:43:12 2011] [crit] [client 127.0.0.1] (13)Permission denied: /home/websites/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable [Mon Oct 17 15:45:34 2011] [crit] [client 127.0.0.1] (13)Permission denied: /home/websites/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable [Mon Oct 17 15:51:25 2011] [crit] [client 127.0.0.1] (13)Permission denied: /home/websites/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Upadate2, /home/websites directory drwx------ 3 websites websites 4096 Oct 17 14:52 . drwxr-xr-x. 3 root root 4096 Oct 17 13:42 .. -rw------- 1 websites websites 372 Oct 17 14:52 .bash_history -rw-r--r-- 1 websites websites 18 May 30 11:46 .bash_logout -rw-r--r-- 1 websites websites 176 May 30 11:46 .bash_profile -rw-r--r-- 1 websites websites 124 May 30 11:46 .bashrc drwxrwxr-x 3 websites apache 4096 Oct 17 13:45 public_html Update3, httpd.conf ### Section 1: Global Environment ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 15 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> #Listen 12.34.56.78:80 Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf #ExtendedStatus On User apache Group apache ServerAdmin root@localhost #ServerName www.example.com:80 UseCanonicalName Off DocumentRoot "/var/www/html" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/home/websites/public_html"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # UserDir: The name of the directory that is appended onto a user's home # directory if a ~user request is received. # # The path to the end user account 'public_html' directory must be # accessible to the webserver userid. This usually means that ~userid # must have permissions of 711, ~userid/public_html must have permissions # of 755, and documents contained therein must be world-readable. # Otherwise, the client will only receive a "403 Forbidden" message. # # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden # <IfModule mod_userdir.c> # # UserDir is disabled by default since it can confirm the presence # of a username on the system (depending on home directory # permissions). # UserDir disabled # # To enable requests to /~user/ to serve the user's public_html # directory, remove the "UserDir disabled" line above, and uncomment # the following line instead: # #UserDir public_html </IfModule> # # Control access to UserDir directories. The following is an example # for a site where these directories are restricted to read-only. # #<Directory /home/*/public_html> # AllowOverride FileInfo AuthConfig Limit # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec # <Limit GET POST OPTIONS> # Order allow,deny # Allow from all # </Limit> # <LimitExcept GET POST OPTIONS> # Order deny,allow # Deny from all # </LimitExcept> #</Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # # The index.html.var file (a type-map) is used to deliver content- # negotiated documents. The MultiViews Option can be used for the # same purpose, but it is much slower. # DirectoryIndex index.html index.html.var # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy All </Files> # # TypesConfig describes where the mime.types file (or equivalent) is # to be found. # TypesConfig /etc/mime.types # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # <IfModule mod_mime_magic.c> # MIMEMagicFile /usr/share/magic.mime MIMEMagicFile conf/magic </IfModule> # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off #EnableMMAP off #EnableSendfile off # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # "combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this # requires the mod_logio module to be loaded. #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog logs/access_log common # # If you would like to have separate agent and referer logfiles, uncomment # the following directives. # #CustomLog logs/referer_log referer #CustomLog logs/agent_log agent # # For a single logfile with access, agent, and referer information # (Combined Logfile Format), use the following directive: # CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> # # WebDAV module configuration section. # <IfModule mod_dav_fs.c> # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb </IfModule> # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" # # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ # # DefaultIcon is which icon to show for files which do not have an icon # explicitly set. # DefaultIcon /icons/unknown.gif # # AddDescription allows you to place a short description after a file in # server-generated indexes. These are only displayed for FancyIndexed # directories. # Format: AddDescription "description" filename # #AddDescription "GZIP compressed document" .gz #AddDescription "tar archive" .tar #AddDescription "GZIP compressed tar archive" .tgz # # ReadmeName is the name of the README file the server will look for by # default, and append to directory listings. # # HeaderName is the name of a file which should be prepended to # directory indexes. ReadmeName README.html HeaderName HEADER.html # # IndexIgnore is a set of filenames which directory indexing should ignore # and not include in the listing. Shell-style wildcarding is permitted. # IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t # # DefaultLanguage and AddLanguage allows you to specify the language of # a document. You can then use content negotiation to give a browser a # file in a language the user can understand. # # Specify a default language. This means that all data # going out without a specific language tag (see below) will # be marked with this one. You probably do NOT want to set # this unless you are sure it is correct for all cases. # # * It is generally better to not mark a page as # * being a certain language than marking it with the wrong # * language! # # DefaultLanguage nl # # Note 1: The suffix does not have to be the same as the language # keyword --- those with documents in Polish (whose net-standard # language code is pl) may wish to use "AddLanguage pl .po" to # avoid the ambiguity with the common suffix for perl scripts. # # Note 2: The example entries below illustrate that in some cases # the two character 'Language' abbreviation is not identical to # the two character 'Country' code for its country, # E.g. 'Danmark/dk' versus 'Danish/da'. # # Note 3: In the case of 'ltz' we violate the RFC by using a three char # specifier. There is 'work in progress' to fix this and get # the reference data for rfc1766 cleaned up. # # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) # Norwegian (no) - Polish (pl) - Portugese (pt) # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW) # AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw # # LanguagePriority allows you to give precedence to some languages # in case of a tie during content negotiation. # # Just list the languages in decreasing order of preference. We have # more or less alphabetized them here. You probably want to change this. # LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW # # ForceLanguagePriority allows you to serve a result page rather than # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) # [in case no accepted languages matched the available variants] # ForceLanguagePriority Prefer Fallback # # Specify a default charset for all content served; this enables # interpretation of all content as UTF-8 by default. To use the # default browser choice (ISO-8859-1), or to allow the META tags # in HTML content to override this choice, comment out this # directive: # AddDefaultCharset UTF-8 # # AddType allows you to add to or override the MIME configuration # file mime.types for specific file types. # #AddType application/x-tar .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # Despite the name similarity, the following Add* directives have nothing # to do with the FancyIndexing customization directives above. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # MIME-types for downloading Certificates and CRLs # AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # # For files that include their own HTTP headers: # #AddHandler send-as-is asis # # For type maps (negotiated resources): # (This is enabled by default to allow the Apache "It Worked" page # to be distributed in multiple languages.) # AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml # # Action lets you define media types that will execute a script whenever # a matching file is called. This eliminates the need for repeated URL # pathnames for oft-used CGI file processors. # Format: Action media/type /cgi-script/location # Format: Action handler-name /cgi-script/location # # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /var/www/error/include/ files and # copying them to /your/include/path/, even on a per-VirtualHost basis. # Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var </IfModule> </IfModule> # # The following directives modify normal HTTP response behavior to # handle known problems with browser implementations. # BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 # # The following directive disables redirects on non-GET requests for # a directory that does not include the trailing slash. This fixes a # problem with Microsoft WebFolders which does not appropriately handle # redirects for folders with DAV methods. # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV. # BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully # # Allow server status reports generated by mod_status, # with the URL of http://servername/server-status # Change the ".example.com" to match your domain to enable. # #<Location /server-status> # SetHandler server-status # Order deny,allow # Deny from all # Allow from .example.com #</Location> # # Allow remote server configuration reports, with the URL of # http://servername/server-info (requires that mod_info.c be loaded). # Change the ".example.com" to match your domain to enable. # #<Location /server-info> # SetHandler server-info # Order deny,allow # Deny from all # Allow from .example.com #</Location> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # #<IfModule mod_proxy.c> #ProxyRequests On # #<Proxy *> # Order deny,allow # Deny from all # Allow from .example.com #</Proxy> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # #ProxyVia On # # To enable a cache of proxied content, uncomment the following lines. # See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details. # #<IfModule mod_disk_cache.c> # CacheEnable disk / # CacheRoot "/var/cache/mod_proxy" #</IfModule> # #</IfModule> # End of proxy directives. ### Section 3: Virtual Hosts # # VirtualHost: If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # NOTE: NameVirtualHost cannot be used without a port specifier # (e.g. :80) if mod_ssl is being used, due to the nature of the # SSL protocol. # # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. # #<VirtualHost *:80> # ServerAdmin [email protected] # DocumentRoot /www/docs/dummy-host.example.com # ServerName dummy-host.example.com # ErrorLog logs/dummy-host.example.com-error_log # CustomLog logs/dummy-host.example.com-access_log common #</VirtualHost> # domain: mysite.com # public: /home/websites/public_html/mysite.com/ <VirtualHost *:80> # Admin email, Server Name (domain name) and any aliases ServerAdmin [email protected] ServerName mysite.com ServerAlias www.mysite.com # Index file and Document Root (where the public files are located) DirectoryIndex index.html DocumentRoot /home/websites/public_html/mysite.com/public # Custom log file locations LogLevel warn ErrorLog /home/websites/public_html/mysite.com/log/error.log CustomLog /home/websites/public_html/mysite.com/log/access.log combined </VirtualHost>

  Read the article

• git private server error: "Permission denied (publickey)."

  - by goddfree

  I followed the instructions here in order to set up a private git server on my Amazon EC2 instance. However, I am having problems when trying to SSH into the git account. Specifically, I get the error "Permission denied (publickey)." Here are the permissions of my files/folders on the EC2 server: drwx------ 4 git git 4096 Aug 13 19:52 /home/git/ drwx------ 2 git git 4096 Aug 13 19:52 /home/git/.ssh -rw------- 1 git git 400 Aug 13 19:51 /home/git/.ssh/authorized_keys Here are the permissions of my files/folders on my own computer: drwx------ 5 CYT staff 170 Aug 13 14:51 .ssh -rw------- 1 CYT staff 1679 Aug 13 13:53 .ssh/id_rsa -rw-r--r-- 1 CYT staff 400 Aug 13 13:53 .ssh/id_rsa.pub -rw-r--r-- 1 CYT staff 1585 Aug 13 13:53 .ssh/known_hosts When checking my logs in /var/log/secure, I used to get the following error message every time I tried to SSH: Authentication refused: bad ownership or modes for file /home/git/.ssh/authorized_keys However, after making a few permission changes, I no longer get this error message. Despite this, I am still getting the "Permission denied (publickey)." message every time I try to SSH. The command I am using to SSH is ssh -T git@my-ip. Here is the full log I get when I run ssh -vT [email protected]: OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to my-ip [my-ip] port 22. debug1: Connection established. debug1: identity file /Users/CYT/.ssh/id_rsa type -1 debug1: identity file /Users/CYT/.ssh/id_rsa-cert type -1 debug1: identity file /Users/CYT/.ssh/id_dsa type -1 debug1: identity file /Users/CYT/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.2 debug1: match: OpenSSH_6.2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 08:ad:8a:bc:ab:4d:5f:73:24:b2:78:69:46:1a:a5:5a debug1: Host 'my-ip' is known and matches the RSA host key. debug1: Found key in /Users/CYT/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/CYT/.ssh/id_rsa debug1: Trying private key: /Users/CYT/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I have spent a few hours going through threads on various sites, including SO and SF, looking for a solution. It seems that the permissions for my files are all okay, but I just can't figure out the problem. Any help would be greatly appreciated. Edit: EEAA: Here are the outputs you requested: $ getent passwd git git:x:503:504::/home/git:/bin/bash $ grep ssh ~git/.ssh/authorized_keys | wc -l grep: /home/git/.ssh/authorized_keys: Permission denied 0

  Read the article

• How to convert strings into integers in python?

  - by elfuego1

  Hello there, I have a tuple of tuples from MySQL query like this: T1 = (('13', '17', '18', '21', '32'), ('07', '11', '13', '14', '28'), ('01', '05', '06', '08', '15', '16')) I'd like to convert all the string elements into integers and put it back nicely to list of lists this time: T2 = [[13, 17, 18, 21, 32], [7, 11, 13, 14, 28], [1, 5, 6, 8, 15, 16]] I tried to achieve it with "eval" but didn't get any decent result yet.

  Read the article

• Simple join gives unnecessary rows,How to get join properly with only matches in both tables

  - by LS

  Table 1 Field1 Field2 AA 20 AA 20 AB 12 AC 13 Table2 field3 field4 AA 20 AA 20 AC 13 AD 23 AW 21 output required: newfield field2 field4 AA 20 20 AA 20 20 AC 13 13 I used: select field1 as newfield, t1.field2,t2.field4 from table1 t1 join table2 t2 on t1.field1=t2.field3 This does not give the required output,Please let me know how to get the required output,Many thx in advance

  Read the article

• VBA/SQL recordsets

  - by intruesiive

  The project I'm asking about is for sending an email to teachers asking what books they're using for the classes they're teaching next semester, so that the books can be ordered. I have a query that compares the course number of this upcoming semester's classes to the course numbers of historical textbook orders, pulling out only those classes that are being taught this semester. That's where I get lost. I have a table that contains the following: -Professor -Course Number -Year -Book -Title The data looks like this: professor year course number title smith 13 1111 Pride and Prejudice smith 13 1111 The Fountainhead smith 13 1222 The Alchemist smith 12 1111 Pride and Prejudice smith 11 1222 Infinite Jest smith 10 1333 The Bible smith 13 1333 The Bible smith 12 1222 The Alchemist smith 10 1111 Moby Dick johnson 12 1222 The Tipping Point johnson 11 1333 Anna Kerenina johnson 10 1333 Everything is Illuminated johnson 12 1222 The Savage Detectives johnson 11 1333 In Search of Lost Time johnson 10 1333 Great Expectations johnson 9 1222 Proust on the Shore Here's what I need the code to do "on paper": Group the records by professor. Determine every unique course number in that group, and group records by course number. For each unique course number, determine the highest year associated. Then spit out every record with that professor+course number+year combination. With the sample data, the results would be: professor year course number title smith 13 1111 Pride and Prejudice smith 13 1111 The Fountainhead smith 13 1222 The Alchemist smith 13 1333 The Bible johnson 12 1222 The Tipping Point johnson 11 1333 Anna Kerenina johnson 12 1222 The Savage Detectives johnson 11 1333 In Search of Lost Time I'm thinking I should make a record set for each teacher, and within that, another record set for each course number. Within the course number record set, I need the system to determine what the highest year number is - maybe store that in a variable? Then pull out every associated record so that if the teacher ordered 3 books the last time they taught that class (whether it was in 2013 or 2012 and so on) all three books display. I'm not sure I'm thinking of record sets in the right way, though. My SQL so far is basic and clearly doesn't work: SELECT [All].Professor, [All].Course, Max([All].Year) FROM [All] GROUP BY [All].Professor, [All].Course; Thanks for your help.

  Read the article

• filter by multiple attributes

  - by cosy

  I have the table : id id_products id_atribut name value 1 13 8 autdio 2.1 2 13 9 hdd 200 Gb 3 13 10 cd-rom 2 4 20 8 audio 2.1 the problem is, how can i select from this table where name="audio" and value="2.1" and name="hdd" and value="200 gb" and return id_products=13 .... How can i do this?

  Read the article

• filter by atributs php script

  - by cosy

  I have the table : id id_products id_atribut name value 1 13 8 autdio 2.1 2 13 9 hdd 200 Gb 3 13 10 cd-rom 2 4 20 8 audio 2.1 the problem is, how can i select from this table where id_products=13 and name="audio" and value="2.1" and name="hdd" and value="200 gb" .... How can i do this?

  Read the article

• psql: FATAL: could not write init file

  - by Leonardo M. Ramé

  as the title points out, I'm getting this error when trying to connect to a PostgreSql database from command line, using PostgreSQL. The client machine is an Ubuntu 11.10 x86_64 and the PostgreSQL libraries are from Version 9.1 Server is PostgreSql 8.3. This is the command that I executed: psql -U postgres -d my_database -h 192.168.0.161 -p 5432 -c "select * from xxyy" I get the same results when I use sudo or su postgres. The sad thing is that I can connect without problems using pgAdmin. Any hint?

  Read the article

• How to change the BIOS splash screen on HP Pavilion G4 1303AU?

  - by avirk

  My cousin got (legally) a laptop model HP Pavilion G4 1303AU from the government of my state. The laptop dual-boots Ubuntu and Windows 7. Everything is great except the BIOS logo at boot which I would like to change but don't know how to. I tried to flash a new BIOS firmware, but this didn't change the logo. I found this link for the same model and the same problem, but no success there either. Also I saw this blog post which wasn't helpful, except for this comment that mentioned an image in .ROM format. Not wishing to decompile and recompile the BIOS, can someone help me out with a step by step guide ?

  Read the article

• "no MPM loaded", but I'm not even using mpm

  - by ezuk

  Running Apache2 on Ubuntu Precise64 in Vagrant. When I try to start it, it says: vagrant@precise64:/etc/apache2$ /etc/init.d/apache2 start * Starting web server apache2 * * The apache2 configtest failed. Output of config test was: AH00534: apache2: Configuration error: No MPM loaded. Action 'configtest' failed. The Apache error log may have more information. But the thing is, my /etc/apache2/apache2.conf file doesn't call for MPM anywhere! I would paste it here but it would make for a huge post... I tried looking up the error log, but I can't find that anywhere, either. Help?

  Read the article

• why is port 500 in use and how can I free it? VPNC error

  - by kirill_igum

  i tried to use network manager to connect to my university's vpn; it didn't work. then i used a command line vpnc: > sudo vpnc [sudo] password for kirill: Enter IPSec gateway address: vpn.net.**.edu Enter IPSec ID for vpn.net.**.edu: ** Enter IPSec secret for **@vpn.net.**.edu: Enter username for vpn.net.**.edu: ** Enter password for **@vpn.net.**.edu: vpnc: Error binding to source port. Try '--local-port 0' Failed to bind to 0.0.0.0:500: Address already in use then i did this: sudo vpnc --local-port 0 with the same config and it all worked. i'd like to be able to use network manager gui to connect to vpn. I wanted to find out which program uses the port 500: > sudo netstat -a |grep 500 tcp 0 0 *:17500 *:* LISTEN udp 0 0 *:4500 *:* udp 0 0 *:17500 *:* unix 3 [ ] STREAM CONNECTED 63500 unix 3 [ ] STREAM CONNECTED 12500 @/tmp/.X11-unix/X0 there is nothing that uses 500 i'm using ubuntu 10.10 on thinkpad x201t

  Read the article

• ssh tunnel error : channel 3: open failed: connect failed: Connection refused

  - by soroosh.strife

  I'm trying to access and browse internet through a ssh server so in my laptop (ubuntu 12.04) I do this: ssh -D 9999 root@server-ip then in the network proxy in my laptop I set: HTTP proxy 127.0.0.1 port 9999 but when I try to open a page in my browser it doesn't connect and in my terminal I get errors like these : channel 4: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused channel 5: open failed: connect failed: Connection refused channel 4: open failed: connect failed: Connection refused channel 6: open failed: connect failed: Connection refused I'm new to this and found this method on the internet so I'm don't know what I'm doing wrong. I'd really appreciate it if anyone can help me make this work.

  Read the article

• Configure Zabbix to send email notifications through Exim

  - by gshankar

  I've been working through the installation and configuration of Zabbix over the past couple of days and I think I've finally got everything working... except the sending of notifications / alerts. I'm running on a Ubuntu server which is using Exim to send emails. I'd previously used this Exim setup to send notifications for Nagios so I know that Exim itself works. However, I can't seem to get Zabbix to send out notifications. Here's what I've done so far: Set up a "test trigger" like so: Trigger severity >= "Information" Send message to User "Admin" The Admin user has a email contact (and I've sent command line emails from Exim on the server using "sendmail" to this email address successfully) The media type for email is set. (I've tried 127.0.0.1) I've checked the user permissions and it is read/write for all host groups The triggers are definitely getting set but no actions are being called... I think my problem is within Zabbix as it's not actually executing the actions And idea how to configure this correctly?

  Read the article

• Webmin and/or port 10000 not working

  - by DisgruntledGoat

  I've recently installed Webmin on a Ubuntu server but I can't get it to work. I asked a recent question about saving iptables but it turns out you don't need to "save" iptables changes. Anyway, I still can't get Webmin working after opening the port up: iptables -A INPUT -p tcp -m tcp --dport 10000 -j ACCEPT It seems that either the command is not opening up port 10000, or there is a separate problem with Webmin. If I run iptables -L I see lines like the following, but no port 10000: ACCEPT tcp -- anywhere anywhere tcp dpt:5555 state NEW ACCEPT tcp -- anywhere anywhere tcp dpt:8002 state NEW ACCEPT tcp -- anywhere anywhere tcp dpt:9001 state NEW However, there is a line: ACCEPT tcp -- anywhere anywhere tcp dpt:webmin Any ideas why Webmin is not working? The IP address works fine and we can view web sites on the server, but https://[ip]:10000/ (or http) doesn't work.

  Read the article

• vpnc Not Adding Internal DNS Servers to resolv.conf

  - by AJ

  I'm trying to setup vpnc on Ubuntu. When I run vpnc, my resolv.conf file does not get changed. It still only contains my ISP's name servers: #@VPNC_GENERATED@ -- this file is generated by vpnc # and will be overwritten by vpnc # as long as the above mark is intact nameserver 65.32.5.111 nameserver 65.32.5.112 Here is my /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.3 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 65.32.5.111 65.32.5.112 Any tips on how to troubleshoot/resolve this? Thanks in advance.

  Read the article

• How to fix "Xlib: extension "RECORD" missing on display :1" in vnc session?

  - by Manish Sapariya

  I am running a JNativeHook capture program on Ubuntu. When I run the session on default X session things are working fine. However when I run the same program from vnc session, it fails with "Xlib: extension "RECORD" missing on display". I checked that this extension is loaded in X which is started by display manager/init. However I am not sure if indeed is initialized during vncserver startup. I could not see anything related in the vnc log. I tried create custom xorg.conf with Module section, which explicitly loads RECORD extension as suggested by many posts but did not help. My environment: Xorg-server: 2.1.12.4-6 tightvncserver: 1.3.9 The same thing works fine on my CentOS 6.4 setup.

  Read the article

• What could be causing my Ghostscript to fail

  - by simplr

  When I run ps2pdf I get the following error messages: norman@host:~$ ps2pdf test.ps test.pdf While reading gs_dbt_e.ps: ERROR: /syntaxerror in -file- Operand stack: (gs_cidfm.ps) 1 --nostringval-- Execution stack: %interp_exit --nostringval-- --nostringval-- --nostringval-- %array_continue --nostringval-- --nostringval-- false 1 %stopped_push --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:928/1123(G)-- --dict:0/20(G)-- --dict:74/200(L)-- --dict:928/1123(G)-- --dict:8/8(G)-- --dict:1/1(G)-- Current allocation mode is global Current file position is 4623 norman@host:~$ I have tried re-installing gs and gs-esp without affect. Files test.ps, gs_dbt_e.ps and gs_cidfm.ps all checked against a working system as being good. Regardless of what postscript file I try to convert, the "Current file position is 4623" remains exactly the same. The host is running Ubuntu 7.04. Any suggestions as to what I should re-install will be much appreciated.

  Read the article

• .htaccess allow from hostname?

  - by Mikey B

  Ubuntu 9.10 Apache2 Hi Guys, Long story short, I need to restrict access to a certain part of my web site based on a dynamic IP source address that changes every now and then. Historically, I've just added the following to htaccess... order deny,allow deny from all # allow my dynamic IP address allow from <dynamic ip> But the problem is that I'll have to manually make this change every time the IP changes. Ideally I'd like to specify a hostname instead... something like: order deny,allow deny from all # allow my host allow from hostname.whatever.local That doesn't seemed to have worked though. I get an error 403 - access forbidden. Does .htaccess not support hostnames?

  Read the article

• SSH new connection begins to hang (not reject or terminate) after a day or so on Ubuntu 13.04 server

  - by kross

  Recently we upgraded the server from 12.04 LTS server to 13.04. All was well, including after a reboot. With all packages updated we began to see a strange issue, ssh works for a day or so (unclear on timing) then a later request for SSH hangs (cannot ctrl+c, nothing). It is up and serving webserver traffic etc. Port 22 is open (ips etc altered slightly for posting): nmap -T4 -A x.acme.com Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-12 16:01 CDT Nmap scan report for x.acme.com (69.137.56.18) Host is up (0.026s latency). rDNS record for 69.137.56.18: c-69-137-56-18.hsd1.tn.provider.net Not shown: 998 filtered ports PORT STATE SERVICE VERSION 22/tcp open ssh OpenSSH 6.1p1 Debian 4 (protocol 2.0) | ssh-hostkey: 1024 54:d3:e3:38:44:f4:20:a4:e7:42:49:d0:a7:f1:3e:21 (DSA) | 2048 dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 (RSA) |_256 45:69:10:79:5a:9f:0b:f0:66:15:39:87:b9:a1:37:f7 (ECDSA) 80/tcp open http Jetty 7.6.2.v20120308 | http-title: Log in as a Bamboo user - Atlassian Bamboo |_Requested resource was http://x.acme.com/userlogin!default.action;jsessionid=19v135zn8cl1tgso28fse4d50?os_destination=%2Fstart.action Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 12.89 seconds Here is the ssh -vvv: ssh -vvv x.acme.com OpenSSH_5.9p1, OpenSSL 0.9.8x 10 May 2012 debug1: Reading configuration data /Users/tfergeson/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to x.acme.com [69.137.56.18] port 22. debug1: Connection established. debug3: Incorrect RSA1 identifier debug3: Could not load "/Users/tfergeson/.ssh/id_rsa" as a RSA1 public key debug1: identity file /Users/tfergeson/.ssh/id_rsa type 1 debug1: identity file /Users/tfergeson/.ssh/id_rsa-cert type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa type -1 debug1: identity file /Users/tfergeson/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 130/256 debug2: bits set: 503/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA dc:21:77:3b:f4:4e:74:d0:87:33:14:40:04:68:33:a6 debug3: load_hostkeys: loading entries for host "x.acme.com" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:10 debug3: load_hostkeys: loaded 1 keys debug3: load_hostkeys: loading entries for host "69.137.56.18" from file "/Users/tfergeson/.ssh/known_hosts" debug3: load_hostkeys: found key type RSA in file /Users/tfergeson/.ssh/known_hosts:6 debug3: load_hostkeys: loaded 1 keys debug1: Host 'x.acme.com' is known and matches the RSA host key. debug1: Found key in /Users/tfergeson/.ssh/known_hosts:10 debug2: bits set: 493/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /Users/tfergeson/.ssh/id_rsa (0x7ff189c1d7d0) debug2: key: /Users/tfergeson/.ssh/id_dsa (0x0) debug1: Authentications that can continue: publickey debug3: start over, passed a different list publickey debug3: preferred publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/tfergeson/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Server accepts key: pkalg ssh-rsa blen 277 debug2: input_userauth_pk_ok: fp 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug3: sign_and_send_pubkey: RSA 3c:e5:29:6c:9d:27:d1:7d:e8:09:a2:e8:8e:6e:af:6f debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). Authenticated to x.acme.com ([69.137.56.18]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: fd 3 setting TCP_NODELAY debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ATLAS_OPTS debug3: Ignored env rvm_bin_path debug3: Ignored env TERM_PROGRAM debug3: Ignored env GEM_HOME debug3: Ignored env SHELL debug3: Ignored env TERM debug3: Ignored env CLICOLOR debug3: Ignored env IRBRC debug3: Ignored env TMPDIR debug3: Ignored env Apple_PubSub_Socket_Render debug3: Ignored env TERM_PROGRAM_VERSION debug3: Ignored env MY_RUBY_HOME debug3: Ignored env TERM_SESSION_ID debug3: Ignored env USER debug3: Ignored env COMMAND_MODE debug3: Ignored env rvm_path debug3: Ignored env COM_GOOGLE_CHROME_FRAMEWORK_SERVICE_PROCESS/USERS/tfergeson/LIBRARY/APPLICATION_SUPPORT/GOOGLE/CHROME_SOCKET debug3: Ignored env JPDA_ADDRESS debug3: Ignored env APDK_HOME debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env Apple_Ubiquity_Message debug3: Ignored env __CF_USER_TEXT_ENCODING debug3: Ignored env rvm_sticky_flag debug3: Ignored env MAVEN_OPTS debug3: Ignored env LSCOLORS debug3: Ignored env rvm_prefix debug3: Ignored env PATH debug3: Ignored env PWD debug3: Ignored env JAVA_HOME debug1: Sending env LANG = en_US.UTF-8 debug2: channel 0: request env confirm 0 debug3: Ignored env JPDA_TRANSPORT debug3: Ignored env rvm_version debug3: Ignored env M2_HOME debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env rvm_ruby_string debug3: Ignored env LOGNAME debug3: Ignored env M2_REPO debug3: Ignored env GEM_PATH debug3: Ignored env AWS_RDS_HOME debug3: Ignored env rvm_delete_flag debug3: Ignored env EC2_PRIVATE_KEY debug3: Ignored env RUBY_VERSION debug3: Ignored env SECURITYSESSIONID debug3: Ignored env EC2_CERT debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 I can hard reboot (only mac monitors at that location) and it will again be accessible. This now happens every single time. It is imperative that I get it sorted. The strange thing is that it behaves initially then starts to hang after several hours. I perused logs previously and nothing stood out. From the auth.log, I can see that it has allowed me in, but still I get nothing back on the client side: Sep 20 12:47:50 cbear sshd[25376]: Accepted publickey for tfergeson from 10.1.10.14 port 54631 ssh2 Sep 20 12:47:50 cbear sshd[25376]: pam_unix(sshd:session): session opened for user tfergeson by (uid=0) UPDATES: Still occurring even after setting UseDNS no and commenting out #session optional pam_mail.so standard noenv This does not appear to be a network/dns related issue, as all services running on the machine are as responsive and accessible as ever, with the exception of sshd. Any thoughts on where to start?

  Read the article

• UNR Installation: Partitioning Error

  - by Wesley

  Hi all, I have a Samsung N120 netbook (with upgraded 2GB RAM). I'm trying to install Ubuntu Netbook Remix, but when I set my partitions, I get an error. The setup I want right now is: Recovery Partition - 6 GB Windows XP Home Partition - 40 GB General Partition - remaining space UNR Partition - 40 GB I am told that I need to resize a partition and it will take a while. However, when it nearly starts, I get an ERROR!!! dialog that says, "Error informing the kernel about modifications to partition /dev/sda5 - Device or resource busy. This means Linux won't know about any changes you made to /dev/sda5 so you shouldn't mount it or use it in any way before rebooting." I'm not too sure what I should do right now... any ideas? Thanks in advance.

  Read the article

• error when start Subversion Server in UberSVN

  - by dakiquang

  I'm using uberSVN on Ubuntu server. Now, I can't checkout, commit source from Subversion Server ( domain.com:9880, port subversion) I tried to start httpd by command line as: sudo /opt/ubersvn/bin/httpdserverctl start , but I get error: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName httpd (pid 895) already running I tried run this command as follow: cd /opt/ubersvn/bin sudo ./ubersvncontrol start then get errors: Starting SysV Tomcat Using CATALINA_BASE: /opt/ubersvn/tomcat Using CATALINA_HOME: /opt/ubersvn/tomcat Using CATALINA_TMPDIR: /opt/ubersvn/tomcat/temp Using JRE_HOME: /opt/ubersvn/jre Using CLASSPATH: /opt/ubersvn/tomcat/bin/bootstrap.jar Using CATALINA_PID: /opt/ubersvn/data/run/tomcat.pid Existing PID file found during start. Tomcat appears to still be running with PID 943. Start aborted. In the Ubersvn website GUI, I tried start Ubersvn server but get error : How to start Subversion Server ?

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >