Search Results

Search found 61551 results on 2463 pages for 'web view'.

Page 389/2463 | < Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >

• Setting up a VPN connection to Amazon VPC - routing

  - by Keeno

  I am having some real issues setting up a VPN between out office and AWS VPC. The "tunnels" appear to be up, however I don't know if they are configured correctly. The device I am using is a Netgear VPN Firewall - FVS336GV2 If you see in the attached config downloaded from VPC (#3 Tunnel Interface Configuration), it gives me some "inside" addresses for the tunnel. When setting up the IPsec tunnels do I use the inside tunnel IP's (e.g. 169.254.254.2/30) or do I use my internal network subnet (10.1.1.0/24) I have tried both, when I tried the local network (10.1.1.x) the tracert stops at the router. When I tried with the "inside" ips, the tracert to the amazon VPC (10.0.0.x) goes out over the internet. this all leads me to the next question, for this router, how do I set up stage #4, the static next hop? What are these seemingly random "inside" addresses and where did amazon generate them from? 169.254.254.x seems odd? With a device like this, is the VPN behind the firewall? I have tweaked any IP addresses below so that they are not "real". I am fully aware, this is probably badly worded. Please if there is any further info/screenshots that will help, let me know. Amazon Web Services Virtual Private Cloud IPSec Tunnel #1 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Your Customer Gateway must be configured with a tunnel interface that is associated with the IPSec tunnel. All traffic transmitted to the tunnel interface is encrypted and transmitted to the Virtual Private Gateway. The Customer Gateway and Virtual Private Gateway each have two addresses that relate to this IPSec tunnel. Each contains an outside address, upon which encrypted traffic is exchanged. Each also contain an inside address associated with the tunnel interface. The Customer Gateway outside IP address was provided when the Customer Gateway was created. Changing the IP address requires the creation of a new Customer Gateway. The Customer Gateway inside IP address should be configured on your tunnel interface. Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.42 Inside IP Addresses - Customer Gateway : 169.254.254.2/30 - Virtual Private Gateway : 169.254.254.1/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: To route traffic between your internal network and your VPC, you will need a static route added to your router. Static Route Configuration Options: - Next hop : 169.254.254.1 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. IPSec Tunnel #2 ================================================================================ #1: Internet Key Exchange Configuration Configure the IKE SA as follows - Authentication Method : Pre-Shared Key - Pre-Shared Key : --- - Authentication Algorithm : sha1 - Encryption Algorithm : aes-128-cbc - Lifetime : 28800 seconds - Phase 1 Negotiation Mode : main - Perfect Forward Secrecy : Diffie-Hellman Group 2 #2: IPSec Configuration Configure the IPSec SA as follows: - Protocol : esp - Authentication Algorithm : hmac-sha1-96 - Encryption Algorithm : aes-128-cbc - Lifetime : 3600 seconds - Mode : tunnel - Perfect Forward Secrecy : Diffie-Hellman Group 2 IPSec Dead Peer Detection (DPD) will be enabled on the AWS Endpoint. We recommend configuring DPD on your endpoint as follows: - DPD Interval : 10 - DPD Retries : 3 IPSec ESP (Encapsulating Security Payload) inserts additional headers to transmit packets. These headers require additional space, which reduces the amount of space available to transmit application data. To limit the impact of this behavior, we recommend the following configuration on your Customer Gateway: - TCP MSS Adjustment : 1387 bytes - Clear Don't Fragment Bit : enabled - Fragmentation : Before encryption #3: Tunnel Interface Configuration Outside IP Addresses: - Customer Gateway : 217.33.22.33 - Virtual Private Gateway : 87.222.33.46 Inside IP Addresses - Customer Gateway : 169.254.254.6/30 - Virtual Private Gateway : 169.254.254.5/30 Configure your tunnel to fragment at the optimal size: - Tunnel interface MTU : 1436 bytes #4: Static Routing Configuration: Static Route Configuration Options: - Next hop : 169.254.254.5 You should add static routes towards your internal network on the VGW. The VGW will then send traffic towards your internal network over the tunnels. EDIT #1 After writing this post, I continued to fiddle and something started to work, just not very reliably. The local IPs to use when setting up the tunnels where indeed my network subnets. Which further confuses me over what these "inside" IP addresses are for. The problem is, results are not consistent what so ever. I can "sometimes" ping, I can "sometimes" RDP using the VPN. Sometimes, Tunnel 1 or Tunnel 2 can be up or down. When I came back into work today, Tunnel 1 was down, so I deleted it and re-created it from scratch. Now I cant ping anything, but Amazon AND the router are telling me tunnel 1/2 are fine. I guess the router/vpn hardware I have just isnt up to the job..... EDIT #2 Now Tunnel 1 is up, Tunnel 2 is down (I didn't change any settings) and I can ping/rdp again. EDIT #3 Screenshot of route table that the router has built up. Current state (tunnel 1 still up and going string, 2 is still down and wont re-connect)

  Read the article

• JavaScript Intellisense with Telerik in ASP.NET Master Page Project with VS 2010

  - by Otto Neff

  Today I was looking for a solution to get finally the JScript/Javascript/jQuery Intellisense Featureworking with my ASP.Net Webform Project to work. I found some good articles: - JScript IntelliSense Overview- JScript IntelliSense: A Reference for the “Reference” Tag- Enabling JavaScript intellisense in VS.NET 2010 to work with SharePoint 2010- Rich IntelliSense for jQueryBUT, all of suggested solutions did not work right with my Master Page based Visual Studio 2010 Solution.Only with physical Javascript Files (Telerik includes certain Javascript Files like jQuery as Ressource) or/andconfigure always a new ASP.NET Scriptmanager / RadScriptManager on every page derived from the Master Page, wasn't exactly what I was looking for. So I came up with the following simple Solution, to Trick VS2010and still have the Project running with multiple runat="server" Scriptmanagers. In short:- New ASP.NET control derived from ScriptManager with emtpy overwritten OnInit() to use it as emtpy wrapper for VS2010. In detail:New RadScriptManager Classusing System; using System.Collections.Generic; using System.Linq; using System.Web; using Telerik.Web.UI; namespace IntellisenseJavascript.Controls { public class IntelliJS : RadScriptManager { protected override void OnInit(EventArgs e) { } protected override void OnPreRender(EventArgs e) { } protected override void OnLoad(EventArgs e) { } protected override void Render(System.Web.UI.HtmlTextWriter writer) { } public override void RenderControl(System.Web.UI.HtmlTextWriter writer) { } } } web.config<configuration> ... <system.web> ... <pages> <controls> <add tagPrefix="telerik" namespace="Telerik.Web.UI" assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4"/> <add tagPrefix="VSFix" namespace="IntellisenseJavascript.Controls" assembly="IntellisenseJavascript"/> </controls> </pages> ... Master Page<%@ Master Language="C#" AutoEventWireup="true" CodeBehind="Site.master.cs" Inherits="IntellisenseJavascript.Site" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head id="head" runat="server"> <title></title> <telerik:RadStyleSheetManager ID="radStyleSheetManager" runat="server" /> </head> <body> <form id="form" runat="server"> <telerik:RadScriptManager ID="radScriptManager" runat="server"> <Scripts> <asp:ScriptReference Assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4" Name="Telerik.Web.UI.Common.Core.js" /> <asp:ScriptReference Assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4" Name="Telerik.Web.UI.Common.jQuery.js" /> <asp:ScriptReference Assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4" Name="Telerik.Web.UI.Common.jQueryInclude.js" /> </Scripts> </telerik:RadScriptManager> <telerik:RadAjaxManager ID="radAjaxManager" runat="server"> </telerik:RadAjaxManager> <div> #MASTER CONTENT# <asp:ContentPlaceHolder ID="contentPlaceHolder" runat="server"> </asp:ContentPlaceHolder> </div> </form> <script type="text/javascript"> $(function () { // Masterpage ready $('body').css('margin', '50px'); }); </script> </body> </html> ASPX Page<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="Default.aspx.cs" Inherits="IntellisenseJavascript.Default" %> <asp:Content ID="Content1" ContentPlaceHolderID="contentPlaceHolder" runat="server"> <VSFix:IntelliJS runat="server" ID="intelliJS"> <Scripts> <asp:ScriptReference Assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4" Name="Telerik.Web.UI.Common.Core.js" /> <asp:ScriptReference Assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4" Name="Telerik.Web.UI.Common.jQuery.js" /> <asp:ScriptReference Assembly="Telerik.Web.UI, Version=2011.3.1115.40, Culture=neutral, PublicKeyToken=121fae78165ba3d4" Name="Telerik.Web.UI.Common.jQueryInclude.js" /> </Scripts> </VSFix:IntelliJS> <div style="border: 5px solid #FF9900;"> #PAGE CONTENT# </div> <script type="text/javascript"> $(function () { // Page ready $('body').css('border', '5px solid #888'); }); </script> </asp:Content> The Result I know, this is not the way it meant to be... but now at least you can have a Main ScriptManager for all Common Scripts and Settings, inject page specific Javascripts in PageLoad Event in normal ASPX Files and have JavaScript Intellisense for defined Scripts from JS Files or Assembly Ressouce in your Content Maybe, vNext will fix this.

  Read the article

• Le Web a besoin de plus de langages de programmation pour rivaliser avec le « natif », selon un ingénieur de Google à l'origine de Dart

  Le Web a besoin de plus de langages de programmation pour rivaliser avec le « natif » selon un ingénieur de Google à l'origine de DartLe monde du développement informatique dispose d'une pléthore de langages de programmation. Mais, si on se limite au domaine du Web, le nombre de langages de programmation disponible serait insuffisant.C'est en substance l'idée qu'a fait passer Gilad Bracha, ingénieur chez Google et membre de l'équipe à l'origine du langage de programmation structuré pour le Web...

  Read the article

• Oracle annonce Oracle Cloud Office et Oracle Open Office 3.3 pour concurrencer les Google Docs et les Office Web Apps

  Oracle annonce Oracle Cloud Office et Oracle Open Office 3.3 Pour concurrencer les Google Docs et les Office Web Apps Oracle vient d'annoncer l'arrivée de Oracle Cloud Office et Open Office 3.3, ses deux suites de productivité bureautique complètes et basées sur les standards ouverts, destinées aux postes de travail, au Web et aux terminaux mobiles. Fondé sur le format ODF (Open Document Format) et les standards ouverts du Web, Oracle Office permet aux utilisateurs de partager des fichiers depuis n'importe quel système. La suite est « en même temps compatible avec les anciens documents Microsoft Office et les systèmes les plus modernes de publication Web 2.0 ».

  Read the article

• Chef-solo cannot locate an nginx recipe template

  - by crftr

  I have been recently experimenting with Chef. I thought I would attempt to rebuild my personal web server using chef-solo. It's an AWS instance running the Amazon 64bit Linux AMI. My first objective is to install nginx. I have cloned the Opscode cookbook repository, and am using their nginx cookbook. My problem appears to be that chef-solo cannot find a template after it has started the process. The command I'm using is chef-solo -j /etc/chef/dna.json dna.json { "nginx": { "user": "ec2-user" }, "recipes": [ "nginx" ] } solo.rb file_cache_path "/var/chef-solo" cookbook_path "/var/chef-solo/cookbooks" ...the output [root@ip-10-202-221-135 chef-solo]# chef-solo -j /etc/chef/dna.json /usr/lib64/ruby/gems/1.9.1/gems/systemu-2.2.0/lib/systemu.rb:29: Use RbConfig instead of obsolete and deprecated Config. [Fri, 27 Jan 2012 19:41:36 +0000] INFO: *** Chef 0.10.8 *** [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Setting the run_list to ["nginx"] from JSON [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Run List is [recipe[nginx]] [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Run List expands to [nginx] [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Starting Chef Run for ip-10-202-221-135.ec2.internal [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Running start handlers [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Start handlers complete. [Fri, 27 Jan 2012 19:41:37 +0000] INFO: Missing gem 'mysql' [Fri, 27 Jan 2012 19:41:38 +0000] INFO: Processing package[nginx] action install (nginx::default line 21) [Fri, 27 Jan 2012 19:41:39 +0000] INFO: Processing directory[/var/log/nginx] action create (nginx::default line 23) [Fri, 27 Jan 2012 19:41:39 +0000] INFO: Processing template[/usr/sbin/nxensite] action create (nginx::default line 30) [Fri, 27 Jan 2012 19:41:39 +0000] INFO: Processing template[/usr/sbin/nxdissite] action create (nginx::default line 30) [Fri, 27 Jan 2012 19:41:39 +0000] INFO: Processing template[nginx.conf] action create (nginx::default line 38) [Fri, 27 Jan 2012 19:41:39 +0000] INFO: Processing template[/etc/nginx/sites-available/default] action create (nginx::default line 46) [Fri, 27 Jan 2012 19:41:39 +0000] INFO: template[/etc/nginx/sites-available/default] mode changed to 644 [Fri, 27 Jan 2012 19:41:39 +0000] ERROR: template[/etc/nginx/sites-available/default] (nginx::default line 46) has had an error [Fri, 27 Jan 2012 19:41:39 +0000] ERROR: template[/etc/nginx/sites-available/default] (/var/chef-solo/cookbooks/nginx/recipes/default.rb:46:in `from_file') had an error: template[/etc/nginx/sites-available/default] (nginx::default line 46) had an error: Errno::ENOENT: No such file or directory - (/tmp/chef-rendered-template20120127-29441-1yp55vz, /etc/nginx/sites-available/default) /usr/lib64/ruby/1.9.1/fileutils.rb:519:in `rename' /usr/lib64/ruby/1.9.1/fileutils.rb:519:in `block in mv' /usr/lib64/ruby/1.9.1/fileutils.rb:1515:in `block in fu_each_src_dest' /usr/lib64/ruby/1.9.1/fileutils.rb:1531:in `fu_each_src_dest0' /usr/lib64/ruby/1.9.1/fileutils.rb:1513:in `fu_each_src_dest' /usr/lib64/ruby/1.9.1/fileutils.rb:508:in `mv' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/provider/template.rb:47:in `block in action_create' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/mixin/template.rb:48:in `block in render_template' /usr/lib64/ruby/1.9.1/tempfile.rb:316:in `open' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/mixin/template.rb:45:in `render_template' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/provider/template.rb:99:in `render_with_context' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/provider/template.rb:39:in `action_create' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource.rb:440:in `run_action' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/runner.rb:45:in `run_action' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/runner.rb:81:in `block (2 levels) in converge' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/runner.rb:81:in `each' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/runner.rb:81:in `block in converge' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection.rb:94:in `block in execute_each_resource' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection/stepable_iterator.rb:116:in `call' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection/stepable_iterator.rb:116:in `call_iterator_block' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection/stepable_iterator.rb:85:in `step' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection/stepable_iterator.rb:104:in `iterate' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection/stepable_iterator.rb:55:in `each_with_index' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/resource_collection.rb:92:in `execute_each_resource' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/runner.rb:76:in `converge' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/client.rb:312:in `converge' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/client.rb:160:in `run' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/application/solo.rb:192:in `block in run_application' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/application/solo.rb:183:in `loop' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/application/solo.rb:183:in `run_application' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/lib/chef/application.rb:67:in `run' /usr/lib64/ruby/gems/1.9.1/gems/chef-0.10.8/bin/chef-solo:25:in `<top (required)>' /usr/bin/chef-solo:19:in `load' /usr/bin/chef-solo:19:in `<main>' [Fri, 27 Jan 2012 19:41:39 +0000] ERROR: Running exception handlers [Fri, 27 Jan 2012 19:41:39 +0000] ERROR: Exception handlers complete [Fri, 27 Jan 2012 19:41:39 +0000] FATAL: Stacktrace dumped to /var/chef-solo/chef-stacktrace.out [Fri, 27 Jan 2012 19:41:39 +0000] FATAL: Errno::ENOENT: template[/etc/nginx/sites-available/default] (nginx::default line 46) had an error: Errno::ENOENT: No such file or directory - (/tmp/chef-rendered-template20120127-29441-1yp55vz, /etc/nginx/sites-available/default) What am I doing incorrectly?

  Read the article

• Google I/O 2011: HTML5 versus Android: Apps or Web for Mobile Development?

  Google I/O 2011: HTML5 versus Android: Apps or Web for Mobile Development? Reto Meier, Michael Mahemoff Native apps or mobile web? It's often a hard choice when deciding where to invest your mobile development resources. While the mobile web continues to grow, native apps and App Stores are incredibly popular. We will present both perspectives in an app development smackdown. From: GoogleDevelopers Views: 13367 73 ratings Time: 01:01:35 More in Science & Technology

  Read the article

• Google I/O 2010 - Where is the social web going next?

  Google I/O 2010 - Where is the social web going next? Google I/O 2010 - Where is the social web going next? Social Web 201 Adam Nash, Daniel Raffel, Chris Messina, Angus Logan, Ryan Sarver, Chris Cole, Kara Swisher (moderator) With the advent of social protocols like OAuth, OpenID and ActivityStrea.ms, it's clear that the web has gone social and is becoming more open. Adam Nash (LinkedIn), Daniel Raffel (Yahoo), Chris Messina (Google), Angus Logan (Microsoft), Ryan Sarver (Twitter), and Chris Cole (MySpace) will discuss the importance of such emerging technologies, how they've adopted them in their products and debate what's next. Kara Swisher will moderate. For all I/O 2010 sessions, please go to code.google.com From: GoogleDevelopers Views: 13 0 ratings Time: 01:07:35 More in Science & Technology

  Read the article

• 'Table' cannot have children of type 'ListViewDataItem'

  - by kazim sardar mehdi

  I was using System.Web.UI.WebControls.Table System.Web.UI.WebControlsTableRow System.Web.UI.WebControls.TableCell objects inside LayoutTemplate’s InstantiateIn method that’s inherited from ITemplateas stated below:Table = new Table(); when compile got the following error on the YPOD(Yellow page of Death) 'Table' cannot have children of type 'ListViewDataItem'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: 'Table' cannot have children of type 'ListViewDataItem'.   Solution:   I Replaced System.Web.UI.WebControls.Table System.Web.UI.WebControls.TableRow System.Web.UI.WebControls.TableCell withSystem.Web.UI.HtmlControls.HtmlTable System.Web.UI.HtmlControls.HtmlTableRow System.Web.UI.HtmlControls.HtmlTableCell and problem solved.

  Read the article

• My webserver just got hacked [closed]

  - by billmalarky

  Possible Duplicate: My server's been hacked EMERGENCY My web server just got hacked. It was on a vps so I think it was hacked through another site. When I loaded the homepage it looks like it ran some script. Can anyone tell me if this script is malicious and if I just got screwed by my own website? `<script>var _0x8ae2=["\x68\x74\x74\x70\x3A\x2F\x2F\x7A\x6F\x6E\x65\x2D\x68\x2E\x6F\x72\x67\x2F\x61\x72\x63\x68\x69\x76\x65\x2F\x6E\x6F\x74\x69\x66\x69\x65\x72\x3D\x54\x69\x47\x45\x52\x2D\x4D\x25\x34\x30\x54\x45","\x6F\x70\x65\x6E","\x68\x74\x74\x70\x3A\x2F\x2F\x7A\x6F\x6E\x65\x2D\x68\x2E\x6F\x72\x67\x2F\x61\x72\x63\x68\x69\x76\x65\x2F\x6E\x6F\x74\x69\x66\x69\x65\x72\x3D\x54\x69\x47\x45\x52\x2D\x4D\x25\x34\x30\x54\x45\x2F\x73\x70\x65\x63\x69\x61\x6C\x3D\x31","\x68\x74\x74\x70\x3A\x2F\x2F\x6C\x6D\x67\x74\x66\x79\x2E\x63\x6F\x6D\x2F\x3F\x71\x3D\x48\x61\x63\x6B\x65\x64\x20\x62\x79\x20\x54\x69\x47\x45\x52\x2D\x4D\x25\x34\x30\x54\x45","\x73\x63\x72\x6F\x6C\x6C\x42\x79","\x74\x69\x74\x6C\x65","\x48\x61\x63\x6B\x65\x44\x20\x42\x79\x20\x54\x69\x47\x45\x52\x2D\x4D\x40\x54\x45","\x6F\x6E\x6B\x65\x79\x64\x6F\x77\x6E","\x72\x65\x73\x69\x7A\x65\x54\x6F","\x6D\x6F\x76\x65\x54\x6F","\x6D\x6F\x76\x65\x28\x29","\x72\x6F\x75\x6E\x64","\x66\x67\x43\x6F\x6C\x6F\x72","\x62\x67\x43\x6F\x6C\x6F\x72","\x4C\x4F\x4C","\x61\x76\x61\x69\x6C\x57\x69\x64\x74\x68","\x61\x76\x61\x69\x6C\x48\x65\x69\x67\x68\x74"];function details(){window[_0x8ae2[1]](_0x8ae2[0]);window[_0x8ae2[1]](_0x8ae2[2]);window[_0x8ae2[1]](_0x8ae2[3]);} ;window[_0x8ae2[4]](0,1);if(document[_0x8ae2[5]]==_0x8ae2[6]){function keypressed(){return false;} ;document[_0x8ae2[7]]=keypressed;window[_0x8ae2[8]](0,0);window[_0x8ae2[9]](0,0);setTimeout(_0x8ae2[10],2);var mxm=50;var mym=25;var mx=0;var my=0;var sv=50;var status=1;var szx=0;var szy=0;var c=255;var n=0;var sm=30;var cycle=2;var done=2;function move(){if(status==1){mxm=mxm/1.05;mym=mym/1.05;mx=mx+mxm;my=my-mym;mxm=mxm+(400-mx)/100;mym=mym-(300-my)/100;window[_0x8ae2[9]](mx,my);rmxm=Math[_0x8ae2[11]](mxm/10);rmym=Math[_0x8ae2[11]](mym/10);if(rmxm==0){if(rmym==0){status=2;} ;} ;} ;if(status==2){sv=sv/1.1;scrratio=1+1/3;mx=mx-sv*scrratio/2;my=my-sv/2;szx=szx+sv*scrratio;szy=szy+sv;window[_0x8ae2[9]](mx,my);window[_0x8ae2[8]](szx,szy);if(sv<0.1){status=3;} ;} ;if(status==3){document[_0x8ae2[12]]=0xffffFF;c=c-16;if(c<0){status=8;} ;} ;if(status==4){c=c+16;document[_0x8ae2[13]]=c*65536;document[_0x8ae2[12]]=(255-c)*65536;if(c>239){status=5;} ;} ;if(status==5){c=c-16;document[_0x8ae2[13]]=c*65536;document[_0x8ae2[12]]=(255-c)*65536;if(c<0){status=6;cycle=cycle-1;if(cycle>0){if(done==1){status=7;} else {status=4;} ;} ;} ;} ;if(status==6){document[_0x8ae2[5]]=_0x8ae2[14];alert(_0x8ae2[14]);cycle=2;status=4;done=1;} ;if(status==7){c=c+4;document[_0x8ae2[13]]=c*65536;document[_0x8ae2[12]]=(255-c)*65536;if(c>128){status=8;} ;} ;if(status==8){window[_0x8ae2[9]](0,0);sx=screen[_0x8ae2[15]];sy=screen[_0x8ae2[16]];window[_0x8ae2[8]](sx,sy);status=9;} ;var _0xceebx11=setTimeout(_0x8ae2[10],0.3);} ;} ;</script><body bgcolor="#000000" oncontextmenu="return false;"><p align="center"><span style="font-weight: 700;"><font face="Tahoma" size="5" color="#EEEEEE"><i>Server HackeD<br/><br/>By</i> </font><br/><br/><a href="#" class="name"><script>if (navigator.appName == 'Microsoft Internet Explorer'){document.write('<font face="Arial Black" size="5" color="#FF0000">');}else{document.write('<font face="Arial Black" size="5" color="black" style="text-shadow:#FFFFFF 2px 2px 5px">');}</script><i onclick="details()">TiGER-M@TE</i></font></a></span><br/><br/><script>var l1n3='<img src="data:image/gif;base64,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" />'; document.write(l1n3+l1n3);`

  Read the article

• The Application Architecture Domain

  - by Michael Glas

  I have been spending a lot of time thinking about Application Architecture in the context of EA. More specifically, as an Enterprise Architect, what do I need to consider when looking at/defining/designing the Application Architecture Domain?There are several definitions of Application Architecture. TOGAF says “The objective here [in Application Architecture] is to define the major kinds of application system necessary to process the data and support the business”. FEA says the Application Architecture “Defines the applications needed to manage the data and support the business functions”.I agree with these definitions. They reflect what the Application Architecture domain does. However, they need to be decomposed to be practical.I find it useful to define a set of views into the Application Architecture domain. These views reflect what an EA needs to consider when working with/in the Applications Architecture domain. These viewpoints are, at a high level:Capability View: This view reflects how applications alignment with business capabilities. It is a super set of the following views when viewed in aggregate. By looking at the Application Architecture domain in terms of the business capabilities it supports, you get a good perspective on how those applications are directly supporting the business.Technology View: The technology view reflects the underlying technology that makes up the applications. Based on the number of rationalization activities I have seen (more specifically application rationalization), the phrase “complexity equals cost” drives the importance of the technology view, especially when attempting to reduce that complexity through standardization type activities. Some of the technology components to be considered are: Software: The application itself as well as the software the application relies on to function (web servers, application servers). Infrastructure: The underlying hardware and network components required by the application and supporting application software. Development: How the application is created and maintained. This encompasses development components that are part of the application itself (i.e. customizable functions), as well as bolt on development through web services, API’s, etc. The maintenance process itself also falls under this view. Integration: The interfaces that the application provides for integration as well as the integrations to other applications and data sources the application requires to function. Type: Reflects the kind of application (mash-up, 3 tiered, etc). (Note: functional type [CRM, HCM, etc.] are reflected under the capability view). Organization View: Organizations are comprised of people and those people use applications to do their jobs. Trying to define the application architecture domain without taking the organization that will use/fund/change it into consideration is like trying to design a car without thinking about who will drive it (i.e. you may end up building a formula 1 car for a family of 5 that is really looking for a minivan). This view reflects the people aspect of the application. It includes: Ownership: Who ‘owns’ the application? This will usually reflect primary funding and utilization but not always. Funding: Who funds both the acquisition/creation as well as the on-going maintenance (funding to create/change/operate)? Change: Who can/does request changes to the application and what process to the follow? Utilization: Who uses the application, how often do they use it, and how do they use it? Support: Which organization is responsible for the on-going support of the application? Information View: Whether or not you subscribe to the view that “information drives the enterprise”, it is a fact that information is critical. The management, creation, and organization of that information are primary functions of enterprise applications. This view reflects how the applications are tied to information (or at a higher level – how the Application Architecture domain relates to the Information Architecture domain). It includes: Access: The application is the mechanism by which end users access information. This could be through a primary application (i.e. CRM application), or through an information access type application (a BI application as an example). Creation: Applications create data in order to provide information to end-users. (I.e. an application creates an order to be used by an end-user as part of the fulfillment process). Consumption: Describes the data required by applications to function (i.e. a product id is required by a purchasing application to create an order. Application Service View: Organizations today are striving to be more agile. As an EA, I need to provide an architecture that supports this agility. One of the primary ways to achieve the required agility in the application architecture domain is through the use of ‘services’ (think SOA, web services, etc.). Whether it is through building applications from the ground up utilizing services, service enabling an existing application, or buying applications that are already ‘service enabled’, compartmentalizing application functions for re-use helps enable flexibility in the use of those applications in support of the required business agility. The applications service view consists of: Services: Here, I refer to the generic definition of a service “a set of related software functionalities that can be reused for different purposes, together with the policies that should control its usage”. Functions: The activities within an application that are not available / applicable for re-use. This view is helpful when identifying duplication functions between applications that are not service enabled. Delivery Model View: It is hard to talk about EA today without hearing the terms ‘cloud’ or shared services.  Organizations are looking at the ways their applications are delivered for several reasons, to reduce cost (both CAPEX and OPEX), to improve agility (time to market as an example), etc.  From an EA perspective, where/how an application is deployed has impacts on the overall enterprise architecture. From integration concerns to SLA requirements to security and compliance issues, the Enterprise Architect needs to factor in how applications are delivered when designing the Enterprise Architecture. This view reflects how applications are delivered to end-users. The delivery model view consists of different types of delivery mechanisms/deployment options for applications: Traditional: Reflects non-cloud type delivery options. The most prevalent consists of an application running on dedicated hardware (usually specific to an environment) for a single consumer. Private Cloud: The application runs on infrastructure provisioned for exclusive use by a single organization comprising multiple consumers. Public Cloud: The application runs on infrastructure provisioned for open use by the general public. Hybrid: The application is deployed on two or more distinct cloud infrastructures (private, community, or public) that remain unique entities, but are bound together by standardized or proprietary technology that enables data and application portability. While by no means comprehensive, I find that applying these views to the application domain gives a good understanding of what an EA needs to consider when effecting changes to the Application Architecture domain.Finally, the application architecture domain is one of several architecture domains that an EA must consider when developing an overall Enterprise Architecture. The Oracle Enterprise Architecture Framework defines four Primary domains: Business Architecture, Application Architecture, Information Architecture, and Technology Architecture. Each domain links to the others either directly or indirectly at some point. Oracle links them at a high level as follows:Business Capabilities and/or Business Processes (Business Architecture), links to the Applications that enable the capability/process (Applications Architecture – COTS, Custom), links to the Information Assets managed/maintained by the Applications (Information Architecture), links to the technology infrastructure upon which all this runs (Technology Architecture - integration, security, BI/DW, DB infrastructure, deployment model). There are however, times when the EA needs to narrow focus to a particular domain for some period of time. These views help me to do just that.

  Read the article

• Materialized View does not import properly when importing a db for a second time in another schema [closed]

  - by marinus

  When I import a database with materialized view mv_mt in just one schema there are no errors. create materialized view mv_mt refresh complete next trunc( sysdate ) + 1 as SELECT sysdate, media_type.* from media_type; But when I try to import the same database to a copy in another schema in the same tablespace I get the following errors: IMP-00017: following statement failed with ORACLE error 1: "BEGIN DBMS_JOB.ISUBMIT(JOB=>438,WHAT=>'dbms_refresh.refresh(''"ALEXANDRA"" "."MV_MT"'');',NEXT_DATE=>TO_DATE('2012-07-02:14:22:36','YYYY-MM-DD:HH24:MI:" "SS'),INTERVAL=>'sysdate + 1 / 24 / 60 / 6 ',NO_PARSE=>TRUE); END;" IMP-00003: ORACLE error 1 encountered ORA-00001: unique constraint (SYS.I_JOB_JOB) violated ORA-06512: at "SYS.DBMS_JOB", line 100 ORA-06512: at line 1 IMP-00017: following statement failed with ORACLE error 23421: "BEGIN dbms_refresh.make('"ALEXANDRA"."MV_MT"',list=>null,next_date=>null," "interval=>null,implicit_destroy=>TRUE,lax=>FALSE,job=>438,rollback_seg=>NUL" "L,push_deferred_rpc=>TRUE,refresh_after_errors=>FALSE,purge_option => 1,par" "allelism => 0,heap_size => 0); END;" IMP-00003: ORACLE error 23421 encountered ORA-23421: job number 438 is not a job in the job queue ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86 ORA-06512: at "SYS.DBMS_IJOB", line 793 ORA-06512: at "SYS.DBMS_REFRESH", line 86 ORA-06512: at "SYS.DBMS_REFRESH", line 62 ORA-06512: at line 1 IMP-00017: following statement failed with ORACLE error 23410: "BEGIN dbms_refresh.add(name=>'"ALEXANDRA"."MV_MT"',list=>'"ALEXANDRA"."MV" "_MT"',siteid=>0,export_db=>'ORCL01'); END;" IMP-00003: ORACLE error 23410 encountered ORA-23410: materialized view "ALEXANDRA"."MV_MT" is already in a refresh group ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95 ORA-06512: at "SYS.DBMS_IREFRESH", line 484 ORA-06512: at "SYS.DBMS_REFRESH", line 140 ORA-06512: at "SYS.DBMS_REFRESH", line 125 ORA-06512: at line 1 Anyone any ideas?

  Read the article

• MVC Portable Area Modules *Without* MasterPages

  - by Steve Michelotti

  Portable Areas from MvcContrib provide a great way to build modular and composite applications on top of MVC. In short, portable areas provide a way to distribute MVC binary components as simple .NET assemblies where the aspx/ascx files are actually compiled into the assembly as embedded resources. I’ve blogged about Portable Areas in the past including this post here which talks about embedding resources and you can read more of an intro to Portable Areas here. As great as Portable Areas are, the question that seems to come up the most is: what about MasterPages? MasterPages seems to be the one thing that doesn’t work elegantly with portable areas because you specify the MasterPage in the @Page directive and it won’t use the same mechanism of the view engine so you can’t just embed them as resources. This means that you end up referencing a MasterPage that exists in the host application but not in your portable area. If you name the ContentPlaceHolderId’s correctly, it will work – but it all seems a little fragile. Ultimately, what I want is to be able to build a portable area as a module which has no knowledge of the host application. I want to be able to invoke the module by a full route on the user’s browser and it gets invoked and “automatically appears” inside the application’s visual chrome just like a MasterPage. So how could we accomplish this with portable areas? With this question in mind, I looked around at what other people are doing to address similar problems. Specifically, I immediately looked at how the Orchard team is handling this and I found it very compelling. Basically Orchard has its own custom layout/theme framework (utilizing a custom view engine) that allows you to build your module without any regard to the host. You simply decorate your controller with the [Themed] attribute and it will render with the outer chrome around it: 1: [Themed] 2: public class HomeController : Controller Here is the slide from the Orchard talk at this year MIX conference which shows how it conceptually works:   It’s pretty cool stuff.  So I figure, it must not be too difficult to incorporate this into the portable areas view engine as an optional piece of functionality. In fact, I’ll even simplify it a little – rather than have 1) Document.aspx, 2) Layout.ascx, and 3) <view>.ascx (as shown in the picture above); I’ll just have the outer page be “Chrome.aspx” and then the specific view in question. The Chrome.aspx not only takes the place of the MasterPage, but now since we’re no longer constrained by the MasterPage infrastructure, we have the choice of the Chrome.aspx living in the host or inside the portable areas as another embedded resource! Disclaimer: credit where credit is due – much of the code from this post is me re-purposing the Orchard code to suit my needs. To avoid confusion with Orchard, I’m going to refer to my implementation (which will be based on theirs) as a Chrome rather than a Theme. The first step I’ll take is to create a ChromedAttribute which adds a flag to the current HttpContext to indicate that the controller designated Chromed like this: 1: [Chromed] 2: public class HomeController : Controller The attribute itself is an MVC ActionFilter attribute: 1: public class ChromedAttribute : ActionFilterAttribute 2: { 3: public override void OnActionExecuting(ActionExecutingContext filterContext) 4: { 5: var chromedAttribute = GetChromedAttribute(filterContext.ActionDescriptor); 6: if (chromedAttribute != null) 7: { 8: filterContext.HttpContext.Items[typeof(ChromedAttribute)] = null; 9: } 10: } 11:   12: public static bool IsApplied(RequestContext context) 13: { 14: return context.HttpContext.Items.Contains(typeof(ChromedAttribute)); 15: } 16:   17: private static ChromedAttribute GetChromedAttribute(ActionDescriptor descriptor) 18: { 19: return descriptor.GetCustomAttributes(typeof(ChromedAttribute), true) 20: .Concat(descriptor.ControllerDescriptor.GetCustomAttributes(typeof(ChromedAttribute), true)) 21: .OfType<ChromedAttribute>() 22: .FirstOrDefault(); 23: } 24: } With that in place, we only have to override the FindView() method of the custom view engine with these 6 lines of code: 1: public override ViewEngineResult FindView(ControllerContext controllerContext, string viewName, string masterName, bool useCache) 2: { 3: if (ChromedAttribute.IsApplied(controllerContext.RequestContext)) 4: { 5: var bodyView = ViewEngines.Engines.FindPartialView(controllerContext, viewName); 6: var documentView = ViewEngines.Engines.FindPartialView(controllerContext, "Chrome"); 7: var chromeView = new ChromeView(bodyView, documentView); 8: return new ViewEngineResult(chromeView, this); 9: } 10:   11: // Just execute normally without applying Chromed View Engine 12: return base.FindView(controllerContext, viewName, masterName, useCache); 13: } If the view engine finds the [Chromed] attribute, it will invoke it’s own process – otherwise, it’ll just defer to the normal web forms view engine (with masterpages). The ChromeView’s primary job is to independently set the BodyContent on the view context so that it can be rendered at the appropriate place: 1: public class ChromeView : IView 2: { 3: private ViewEngineResult bodyView; 4: private ViewEngineResult documentView; 5:   6: public ChromeView(ViewEngineResult bodyView, ViewEngineResult documentView) 7: { 8: this.bodyView = bodyView; 9: this.documentView = documentView; 10: } 11:   12: public void Render(ViewContext viewContext, System.IO.TextWriter writer) 13: { 14: ChromeViewContext chromeViewContext = ChromeViewContext.From(viewContext); 15:   16: // First render the Body view to the BodyContent 17: using (var bodyViewWriter = new StringWriter()) 18: { 19: var bodyViewContext = new ViewContext(viewContext, bodyView.View, viewContext.ViewData, viewContext.TempData, bodyViewWriter); 20: this.bodyView.View.Render(bodyViewContext, bodyViewWriter); 21: chromeViewContext.BodyContent = bodyViewWriter.ToString(); 22: } 23: // Now render the Document view 24: this.documentView.View.Render(viewContext, writer); 25: } 26: } The ChromeViewContext (code excluded here) mainly just has a string property for the “BodyContent” – but it also makes sure to put itself in the HttpContext so it’s available. Finally, we created a little extension method so the module’s view can be rendered in the appropriate place: 1: public static void RenderBody(this HtmlHelper htmlHelper) 2: { 3: ChromeViewContext chromeViewContext = ChromeViewContext.From(htmlHelper.ViewContext); 4: htmlHelper.ViewContext.Writer.Write(chromeViewContext.BodyContent); 5: } At this point, the other thing left is to decide how we want to implement the Chrome.aspx page. One approach is the copy/paste the HTML from the typical Site.Master and change the main content placeholder to use the HTML helper above – this way, there are no MasterPages anywhere. Alternatively, we could even have Chrome.aspx utilize the MasterPage if we wanted (e.g., in the case where some pages are Chromed and some pages want to use traditional MasterPage): 1: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> 2: <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> 3: <% Html.RenderBody(); %> 4: </asp:Content> At this point, it’s all academic. I can create a controller like this: 1: [Chromed] 2: public class WidgetController : Controller 3: { 4: public ActionResult Index() 5: { 6: return View(); 7: } 8: } Then I’ll just create Index.ascx (a partial view) and put in the text “Inside my widget”. Now when I run the app, I can request the full route (notice the controller name of “widget” in the address bar below) and the HTML from my Index.ascx will just appear where it is supposed to.   This means no more warnings for missing MasterPages and no more need for your module to have knowledge of the host’s MasterPage placeholders. You have the option of using the Chrome.aspx in the host or providing your own while embedding it as an embedded resource itself. I’m curious to know what people think of this approach. The code above was done with my own local copy of MvcContrib so it’s not currently something you can download. At this point, these are just my initial thoughts – just incorporating some ideas for Orchard into non-Orchard apps to enable building modular/composite apps more easily. Additionally, on the flip side, I still believe that Portable Areas have potential as the module packaging story for Orchard itself.   What do you think?

  Read the article

• « ASP.NET et Web Tools 2012.2 » sort en RC, avec de nouvelles fonctionnalités pour WebForms, MVC, WebAPI et SignalR

  « ASP.NET et Web Tools 2012.2 » sort en RC avec de nouvelles fonctionnalités pour WebForms, MVC, WebAPI et SignalR Le Web évolue rapidement, et Microsoft est conscient de cela. L'éditeur a ainsi adopté un cycle de mise à jour pour ASP.NET plus rapide que celui de Visual Studio. La société compte donc publier une mise à jour pour sa plateforme de développement Web ASP.NET en début d'année prochaine. Les développeurs qui veulent commencer à « jouer » avec les nouvelles fonctionnalités de cette mise à jour peuvent déjà télécharger sa version Release Candidate (RC) qui vient d'être publiée par les équipes ASP.NET et Visual Web Developer de Microsoft.

  Read the article

• The JavaServer Faces 2.2 viewAction Component

  - by Janice J. Heiss

  Life just got easier for users of JavaServer Faces. In a new article, now up on otn/java, titled “New JavaServer Faces 2.2 Feature: The viewAction Component,” Tom McGinn, Oracle’s Principal Curriculum Developer for Oracle Server Technologies, explores the advantages offered by the JavaServer Faces 2.2 view action feature, which, according to McGinn, “simplifies the process for performing conditional checks on initial and postback requests, enables control over which phase of the lifecycle an action is performed in, and enables both implicit and declarative navigation.”As McGinn observes: “A view action operates like a button command (UICommand) component. By default, it is executed during the Invoke Application phase in response to an initial request. However, as you'll see, view actions can be invoked during any phase of the lifecycle and, optionally, during postback, making view actions well suited to performing preview checks.”McGinn explains that the JavaServer Faces 2.2 view action feature offers several advantages over the previous method of performing evaluations before a page is rendered:   * View actions can be triggered early on, before a full component tree is built, resulting in a lighter weight call.   * View action timing can be controlled.   * View actions can be used in the same context as the GET request.   * View actions support both implicit and explicit navigation.   * View actions support both non-faces (initial) and faces (postback) requests.Read the complete article here.

  Read the article

• Square Peg Web: The Best Choice for Creativity and Innovative Designs and E-Commerce.

  A complete E-Service and web development agency is what Square Peg Web is all about. Everyone needs a website these days to showcase their products and sell them online. The days of having a regular ... [Author: Andrew Warren - Web Design and Development - June 18, 2010]

  Read the article

• SmartView 11.1.2.2.103 - Support for MS Office 64 added

  - by THE

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 (thanks to Nancy, who shared this with me)  New for Smart View v11.1.2.2.103, Patch 14362638,   Microsoft Office 64-bit is now supported:  Information for 64-Bit Microsoft Office Installations: In this release, Smart View supports the 64-bit version on Microsoft Office. If you use 64-bit Office, please note the following: Oracle provides separate Smart View installation files for 64-bit and 32-bit Office systems. . smartview-x64.exe is the file for 64-bit Office installations. smartview.exe is the file for 32-bit Office installations. The 64-bit version of Smart View pertains only to the 64-bit version of Microsoft Office and not to the version of the operating system. Customers with 64-bit operating systems and the 32-bit version of Microsoft Office should install the 32-bit version of Smart View. You cannot install the 64-bit version of Smart View from EPM Workspace (13530466). Although Planning Offline is supported for 64-bit operating systems, it is not supported for 64-bit Smart View installations. If you use Planning Offline with Smart View, you must use the 32-bit version of Smart View and the 32-bit version of Microsoft Office. In 64-bit versions of Excel 2010 SP1, the presence of Smart View functions may cause Excel to terminate abruptly and may prevent Copy Data Point and Paste Data Point functions from working. This is a Microsoft issue, and a service request has been filed with Microsoft. Workaround: Until the Microsoft fix, use the 32-bit version of Smart View. (13606492) The Smart View function migration utility is not supported on 64-bit Office. (14342207) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• Sortie imminente du Chrome Web Store, Google envoie un mail d'information et organise un évènement sur Chrome demain

  Sortie imminente du Chrome Web Store Google envoie un mail d'information aux développeurs d'extensions pour Chrome Google va envoyer une première série de mails d'information aux développeurs d'extensions et de thèmes pour Chrome, signe que l'ouverture de la boutique en ligne Chrome Web Store est imminente. Gregor Hochmuth, chef de produit de Google Chrome Web Store, a lui-même annoncé que les développeurs seront informés avant le lancement officielle de la boutique. Le but de ces messages sera d'indiquer les modifications apportées au magasin afin que les développeurs puissent vérifier l'impact sur leurs codes et y apporter des modifications avant la publication en...

  Read the article

• How to leverage the internal HTTP endpoint available on Azure web roles?

  - by Alfredo Delsors

  Imagine you have a Web application using an in-memory collection that changes occasionally but is used very often. The collection gets loaded from storage on the Application_Start global.asax event and is updated whenever its content changes. If you want to deploy this application on Azure you need to keep in mind that more than one instance of the application can be running at any time and therefore you need to provide some mechanism to keep all instances informed with the latest changes. Because the communication through internal endpoints between Azure role instances is at no cost, a good solution can be maintaining the information on Azure Storage Tables, reading its contents on the Application_Start event and populating its changes to all other instances using the internal HTTP port available on Azure Web Roles. You need to follow these steps to leverage the internal HTTP endpoint available on Azure web roles to maintain all instances up to date. 1.   Define an internal HTTP endpoint in the Web Role properties, for example InternalHttpEndpoint   2.   Add a new WCF service to the Web Role, for example NotificationService.svc 3.   Disable multiple site bindings in web.config: <serviceHostingEnvironment multipleSiteBindingsEnabled="false"> 4.   Add a method on the new service to receive notifications from other role instances. namespace Service { [ServiceContract] public interface INotificationService { [OperationContract(IsOneWay = true)] void Notify(Information info); } } 5.   Declare a class that inherits from System.ServiceModel.Activation.ServiceHostFactory and override the method CreateServiceHost to host the internal endpoint. public class InternalServiceFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { var internalEndpointAddress = string.Format( "http://{0}/NotificationService.svc", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["InternalHttpEndpoint"].IPEndpoint); ServiceHost host = new ServiceHost( typeof(NotificationService), new Uri(internalEndpointAddress)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); host.AddServiceEndpoint( typeof(INotificationService), binding, internalEndpointAddress); return host; } } Note that you can use SecurityMode.None because the internal endpoint is private to the instances of the service. 6.   Edit the markup of the service right clicking the svc file and selecting "View markup" to add the new factory as the factory to be used to create the service <%@ ServiceHost Language="C#" Debug="true" Factory="Service.InternalServiceFactory" Service="Service.NotificationService" CodeBehind="NotificationService.svc.cs" %> 7.   Now you can notify changes to other instances using this code: var current = RoleEnvironment.CurrentRoleInstance; var endPoints = current.Role.Instances .Where(instance => instance != current) .Select(instance => instance.InstanceEndpoints["InternalHttpEndpoint"]); foreach (var ep in endPoints) { EndpointAddress address = new EndpointAddress( String.Format("http://{0}/NotificationService.svc", ep.IPEndpoint)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); var factory = new ChannelFactory<INotificationService>(binding); INotificationService instance = factory.CreateChannel(address); instance.Notify(changedinfo); }

  Read the article

• Request format is unrecognized for URL unexpectedly ending exception in web service.

  - by Jalpesh P. Vadgama

  Recently I was getting error when I am calling web service using Java script. I searching on net and debugging I have found following things. Any web service support three kinds of protocol HttpGet,HttpPost and SOAP. In framework 1.0 it was enabled by default but after 1.0 framework it will not be enabled by default due to security issues and WS-Specifications. So we have to enabled them via putting configuration settings in web.config. Here is the code for that. <configuration> <system.web> <webservices> <protocols> <add name="HttpGet"></add> <add name="HttpPost"></add> </protocols> </webservices> </system.web> </configuration> Hope this will help you. Stay tuned for more. Till that Happy programming!!!. Technorati Tags: WebService,Request,Javascript,Ajax

  Read the article

• Grid Style. Is It The Next Big Thing In Web Design?

  Inspired by typographic magazine layout grids more and more web designers are starting to embrace grid-based design siting cleaner and more easily digestible web pages as a benefit. The concept of ... [Author: Michiel Van Kets - Web Design and Development - June 17, 2010]

  Read the article

• Rotation of viewplatform in Java3D

  - by user29163

  I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

  Read the article

• Opera sort un outil de débogage open-source pour les développeurs web, la première bêta de Dragonfly est disponible

  Opera sort un outil de débogage open-source pour les développeurs web La première bêta de Dragonfly est disponible Après avoir permis aux développeurs de créer plus facilement des extensions pour son navigateur, Opera Software veut en faire un outil de prédilection pour les développeurs et intégrateurs Web. L'entreprise lance la première bêta de Dragonfly, un ensemble - désormais open-source - d'outils d'inspection, destinés essentiellement à trouver et à corriger les erreurs sur les pages web. Similaire au célèbre Mo...

  Read the article

• Trouble rotating viewplatform in Java3D [closed]

  - by user29163

  I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

  Read the article

• When do videos appear in google's web search results?

  - by snakile

  Sometimes videos appear in google's web search results (and not only in Google Videos). For a video to appear in the web search results, does it have to appear in Google Videos firs? Does each and every video that appears in Google Videos has a chance to appear in google's web search results (given that the video is very relevant to the query, more relevant than all the other videos)? Please note: I'm not asking about video sitemaps or mRSS. I'm just asking when do videos appear in google's web search results compared to when do videos appear in Google Videos.

  Read the article

• Le W3C publie un premier brouillon de l'API Push, qui permettra d'intégrer des notifications Push au sein des applications Web

  Le W3C publie un premier brouillon de l'API Push qui permettra d'intégrer des notifications Push au sein des applications Web Le groupe de travail Web Applications du W3C (World Wide Web Consortium) vient de publier un brouillon pour l'API Push. La spécification Push API décrit la façon dont un serveur d'applications peut envoyer des données cryptées (messages Push) à des applications Web côté client, telles qu'elles sont effectuées par des « services Push ». L'API pourra être utilisée par les développeurs pour mettre en oeuvre des systèmes de notifications Push au sein de leurs Webapps. Selon la description du W3C, le message Push pourra être envoyé même si l'applic...

  Read the article

< Previous Page | 385 386 387 388 389 390 391 392 393 394 395 396  | Next Page >