Search Results

Search found 17130 results on 686 pages for 'computer lab'.

Page 39/686 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Strange windows boot problem - My computer won't boot from hard disk

  - by user29779

  Hello, Until yesterday, I had windows XP installed on my computer. After installing the OS, and setting the BIOS to boot from the hard-disk first, I discovered a strange problem - the OS wasn't booted and the only way I could get it to load was to insert a windows installation disk, enter repair mode, do "fixboot" and restart. The problem only occured when the computer was booted after shut-down. If I only restarted it, everything worked fine. Yesterday, I upgraded my XP to win7 and the problem persists. I tried the same "trick" I did with XP to get it to load, by entering repair and doing "bootrec /fixmbr" and "bootrec /fixboot" but that didn't work (and when I run "scanos" it didn't find any windows installations). Eventually, I got it to load by changing the settings in the BIOS to boot from CD first and HD second, removing the installation disk from the drive, letting it fail to boot from CD and then re-insert the disk. Anyone has any idea what may be the cause or how can I investigate this issue? Thanks! Marina

  Read the article

• Virus ridden computer freezes on startup - can't access safe mode

  - by Eric

  Someone whom I love but who cannot be trusted with a live internet connection downloaded a particularly nasty virus that in turn downloaded a variety of unknown other viruses onto my home computer. The computer now freezes completely a few seconds after reaching the desktop and is unresponsive to any keyboard or mouse command. There are videos of my little kid on this hard drive that are not backed up and that I cannot bear to lose. But if I could get in there long enough to copy them off to an external drive I would have no problem doing a clean windows install to fix the problem; everything else is backed up online but the videos were too large. Normally I would start by going into safe mode but I have a large Dell monitor that doesn't show anything until the welcome screen appears. I think that I have gotten into the setup screen once or twice by mashing keys before I can see anything, but this monitor doesn't support that so I can't see what I'm doing to get it to boot from CD or anything else. I'm at my wits end. Any advice?

  Read the article

• Cannot find network path for computer in workgroup of home Windows XP PCs

  - by John Galt

  VMWare Workstation 6.5 is running as an app on a Windows Vista 64bit PC host. Thanks to Workstation we have 2 guest machines running: TerriVM and MattVM (both of these run Windows XP SP2). We are attempting to get virtual networking configured so we can access the files of both of these VM guest systems from other real PCs connected to this home network. We think we are close but we can't quite get it right... Here is what we've done so far: * On VM Workstation, we set "Host Virtual Network Mapping" to use VMnet0 with the setting "Bridge to an automatically chosen adapter". * On each VM guest (i.e. using Windows explorer on XP), we rightmouse on the C disk, click "Sharing" tab, set shareName to "C_Disk" and check both boxes labeled "Share this folder on the network" and "Allow network users to change my files". Symptoms: On "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \TerriVM\C_Disk and assign drive letter T. We see all the folders on this shared drive and can open files on them. So that is good. On same "JohnsRealXP" PC, we go to Windows Explorer, My Computer, Map Network Drive, type into Folder textbox: \MattVM\C_Disk and assign drive letter M. We get a message box "_The network path \mattvm\C_Disk could not be found_". Alternatively, we type just \mattvm\ into the Folder box and click "Browse" and get a dialog box where we drill down from "Entire Network" to "Microsoft Windows Network" to "Workgroup" where both TerriVM and MattVM are listed as computers on the network. Clicking the + sign next to MattVM gives an hourglass and never enables the OK button and I have to cancel. In summary, I think we've attempted to share both of these virtual machines using the same techniques and connect to them in similar fashion, but one connects properly and the other machine can be seen but no shared resources on it can be accessed. Can anyone suggest something possibly overlooked or something to try? Thanks so much in advance.

  Read the article

• MicroSD card isn't detected by computer, apparently usable only with phone

  - by paulcjoubert

  I have a 4GB MicroSD card that apparently only works (in the sense that the device detects and can read and write from and to the card) with my old Nokia XpressMusic 5800 phone. I have taken pictures and recorded voice notes that were saved on the card. These are accessible after the card has been removed, which tells me that the problem isn't with the card. The card could also not be locked to the phone as it would at least be detected by a computer and it would be able to write raw data to it with dd, such as /dev/zero. Also, the card is not the Nokia card that came with the phone and I have done nothing that would have caused it to be locked. (I could not find anything on Nokia's website that helps, but then again... my search was not THAT thorough.) The card works on no other device that I have tried so far. I have tried it in my Canon camera (through an adapter), but it refuses to even boot with the card inserted. My card reader (via USB cable and hub) is detected as /dev/sdx with or without the card inserted. When trying to access the card I get an "No medium found". dmesg does not report any change at all when inserting and removing the card. I would obviously like to use my card on other devices - the phone is quite old - and even a likely explanation would help. Thankyou in advance! EDIT 1: I can use the card by connecting the phone to my computer, but this is impractical and would not allow me to use the card in any other device. EDIT 2: The data on the card is not important to me at all.

  Read the article

• HOW TO save Contacts from iPhone to Computer?

  - by goodm

  Step 1: Download [b]Tansee iPhone Transfer Contact[/b] free trial version [url="http://softseeking.com/prodail.aspx?proid=47"]here[/url],then install the software (skip if done yet). u can download at:[url="http://www.softseeking.com/prodail.aspx?proid=47"]http://www.softseeking.com/prodail.aspx?proid=47[/url] Step 2: Connect iPhone to your computer. Step 3: Run Tansee iPhone Transfer Contact , your contacts on iPhone memory will display as shown in your iPhone screen automatically as fig 1. Click on single name, all his or her information will display as fig 2 shown. Step 4-a: In fig 1 situation, you can click button "Copy" to copy all contacts from your iPhone to your computer , then select options: 1: Choose File Type: backup to TXT file, ANTC file or CSV file; 2: Choose File Path: You can change the backup path if you do not use default path. 3: Advanced Option: if you choose ANTC format in step 1, you can add a password to protect the file. Note: We do not know the password, so please do remember it. Click OK Button to finish the Copy. See fig 3. Note: You can only copy the first 5 contacts with trail version.[/SIZE] [/SIZE] [size=3][size=3]Step 4-b: In fig 2 situation, click button "Copy Contact From who" to copy contact of a single person, select options: 1: Choose File Type: Backup contacts to TXT file, and CSV file in single contact transfer; 2: Choose File Path: You can change the backup path if you do not use default path; 3: Advanced Option: Disabled in single contact transfer. Click OK Button to finish the Copy. See fig 4. Note: You can only copy the first 5 contacts in trail version.[/size] [/size]

  Read the article

• Why won't my computer go to sleep automatically?

  - by Django Reinhardt

  Windows 8 is set to sleep after 30 mins, and it used to work, but recently it's started refusing to sleep. (I can still manually ask it to go to sleep without any issue.) I was having issues a while ago, but it was with my network adapter. That's since been disabled, so it's definitely not that: I've checked to see what devices are able to wake up my machine, but it only appears to be my mouse: Which is odd, because I haven't recently changed my mouse, and more confusing still: The monitor does go to sleep just fine. If it was actually the mouse keeping my system awake, I'm pretty sure the monitor wouldn't go to sleep. I've checked my Wake Timers, and nothing: I've also checked my existing requests... UPDATE: I found something. What to do with it, I don't know... Note: Even when /requests says that there's "NONE" under every category, my machine still won't sleep(!). In short: How can I tell what's preventing my computer from Sleeping? UPDATE: Ok, so I now have a few more pieces of the puzzle. I came back to my computer and it was ASLEEP! Lawks! It seems that the only times it doesn't sleep is if VLC Player is open, even if a video isn't actually playing. UPDATE UPDATE: Ok, so it won't sleep sometimes when VLC Player ISN'T running, either. Bah!

  Read the article

• Extremely Weird Computer Problem

  - by waiwai933

  Well, having worked with computers a long time, I thought I had seen everything that could go wrong with a computer. Today, I learned that I was wrong. My Mac has been behaving extremely weirdly. While the keyboard is fine, the mouse holds extremely weird behavior. It will open apps from the Dock, but not open documents from a Stack. The top menu bar will work, but only after I restart Finder. I am unable to close most windows, except with Cmd+Q. Clicking on a link in Safari, for some reason, opens it in a new tab. I can not select checkboxes, but I know a click is going through because you can see a quick indent in the check box, before it reverts to the unchecked state. I've restarted my computer, as well. I don't see a virus when looking through top, but I guess it could be subverting top. Does anyone have an idea what is going on?

  Read the article

• why does my computer crash?

  - by chobo2

  Hi my computer keeps crashing and I don't know why. At first I thought because I had my cpu over clocked that it all of sudden was crashing. So I set my cpu back to regular speed. This did not help. I then thought it was because 2 sticks of my memory where from a computer that suffered from a power surge. However I just ran the windows memory diagnostic tool( extended) and after like 6 hours of testing my memory it found no errors. So now the only thing that is left is windows 7 64bit. I first over clocked my cpu for a couple months while running XP. Never had a problem. I installed the memory and windows 7 at the same time. But I not sure if it is my memory now since it passed the diagnostic tests. However I am not sure if it is windows 7 either has I installed it twice in the last year. I really don't want to go back to XP to find out if this is the case. So here are my blue screens of deaths(from bluescreen). https://sites.google.com/site/myerrorswin7/errors (I hope you enjoy my great site lol) As you can see most of them are different NTFS_FILE_SYSTEM KMODE_EXCEPTION_NOT_HANDLED BAD_POOL_HEADER IRQL_NOT_LESS_OR_EQUAL SYSTEM_THREAD_EXCEPTION_NOT_HANDLED SYSTEM_SERVICE_EXCEPTION

  Read the article

• Good references to know why has my computers stopped responding me

  - by Peterstone

  Hello all! I´m a windows xp user (but not for much time...) and I usually see how my computer stop of responding me. The process is this: Firsly it became totally stopped or very slow for certain periods of 5 minutes. How could I do? After that it gets stopped (Even not totally because If I click on the bar I see a blinking response in the bar botton of the program I click on. It´s could be anything related with security (like the firewall or some virus)? Computer university: I usually experience this, using Matlab (R2007a) with System Generator (its respective compatible version) My personal laptop: It´s usually works well but when stopped periods became to appears I know in not much time it will became totally stopped. I usually see how Word 2007 get stopped and after a while my windows xp gets stopped. (well I can access to the the manage task pressing ctr+alt and...). The only solution I see is to kill program by program... My petition: Please, I need good references that help me how to think in order to avoid or to manage the problems previously described. Does anyone know usefull books or articles? EDIT: Laptop: OS: XP Home Edition Version 2002 SP3 Hardware: HP Mini Intel(R)Atom(TM) CPU N270 @1,60GHz 1.99 GB RAM University Computer: OS: XP Profesional SP3 Hardware: AMD Athlon(tm) XP 1800+ 1.54 GHz, 768 MB RAM

  Read the article

• No video signal at boot with custom built computer

  - by Bart Pelle

  After booting my custom built computer, neither the VGA nor the HDMI methods from the video card seem to emit any signal to the display. I have tested both a regular VGA screen and a modern HDMI screen. Both did not receive signal. Below are the specifications from my computer build: Intel Core i5 3350P ASRock B75 Pro 3-M Seagate Barracuda 7200.14 ST1000 DM003 1000GB Corsair Vengeance LP CML 8GX 3M2 A1600 CGB Blue (2 cards) Cooler Master B Series B600 Club 3D Radeon HD7870 XT Jokercard Samsung SH-224 BB Black Sharkoon T28 Case The motherboard does not emit any beeps on startup. The CD tray opens properly and all fans spin. All cables are properly connected. All components are new and no damage was found on any of the components. The fans on the GPU spin aswell. The VGA test we did was by using the onboard graphics from the Intel i5, but this gave no result. The HDMI test was from the GPU which did not emit any signal either. We have not been able to test out the DVI, could this be important to test, even though all the other methods did not work? Thank you for your time and hopefully reply.

  Read the article

• Microsoft Access: computer freezes when user tries to update record

  - by CarlF

  A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

  Read the article

• Moving the Windows 7 Pro OEM image to computer with the same hardware

  - by SWin

  We bought 8 clean computers (even without HDD) with the same hardware and bought eight Windows 7 Pro OEM disks. Now I prepare one Win7 installation without activation but with all required programs, settings, etc. Then I'm going to clone the image to other computers even without sysprepping. I'm going to change the product key to legal number at COA sticker on each computer and make the activation through the Internet. Will this scenario work? I know that OEM's license agreement forbids the image cloning and the actions I'm going to do breaks the agreement. According the license agreement I should make the manual clean install of Win7 on each computer. But how Microsoft and other viewers can determine the cloning fact? All computers are the same and license Win7 DVDs are also the same. However in my case the installation time also will the same (and may be kind of installation code or something else) and this is not good. Will the Win7 activation work? Can I be sure that activation will not damage after some time? Can Microsoft determine the cloning fact during the activation process? Thank you.

  Read the article

• Windows 7 on a 64-bit computer

  - by GetFree

  I read on Wikipedia that Windows 7 on a 64-bit PC needs twice as much RAM as on a 32-bit PC. I understand why is that: every number stored in memory takes 8 bytes rather than just 4. That, in simple terms, means that your amount of RAM is reduced to half when you use Windows 7 on a 64-bit computer. Now, I have a Intel Core 2 Duo Laptop with Windows Vista right now (2 GB of RAM). My question is: Since Core 2 is a 64-bit architecture, if I upgrade to Windows 7 will my laptop be working as if it had just 1 GB of RAM? Or... to say it in other words: Having a 64-bit PC with Windows 7 do you need twice as much RAM as you need on a 32-bit PC to have the same performance? If I am right, then I'd say it's a terrible business to have a 64-bit computer and Windows 7 on it (I hope I am mistaken, though). Follow-up: After some answers, I'm realizing it's not the same thing to have a 32-bit OS on a 64-bit PC than a 64-bit OS on a 64-bit PC. Apparently, the problem of Windows 7 requiring twice as much RAM on 64-bit architectures is when you have both the OS and PC supporting 64 bits. I'd like new answers to address this issue. Also, is it possible to have more that 4 GB of RAM on a 64-bit PC using a 32-bit version of Windows?

  Read the article

• Using Computer name in URL causes issues when connecting to Web Services

  - by AWinters

  The set of applications I work on all access the same 8 or so web services that we have. These services and applications all reside on the same box and all use the computer name when trying to connect to the web service. For Example: If I have a web service called MapDataService and I have an application that accesses it, it would access it by the URL: http://COMPUTERNAME/MapDataService/MapDataService.asmx. This works in most of the applications that access the web service. However, we have several applications that, when using the computer name in the URL, will not get data returned from the service (actually a 503 is returned). In order to get it to work, the IP address of the system needs to be used in place of the COMPUTERNAME. This strikes me as very odd considering, as I mentioned before, all applications and services are on the same box and most other applications usr the COMPUTERNAME with no issues. Can someone give me some insight as to what could be causing this? We have no access to IIS logs and what logs we did get (this is on a customer site) are not very useful.

  Read the article

• daily rsync backups with hard links, checksums, and a new computer

  - by user75058

  I backup my laptop to a Fedora desktop daily using rsync with hard links. This has worked great for almost a year. I recently purchased a new computer, transferred over my data, and would like to continue backing up this computer daily. However, due to the data transfer from the old laptop to the new laptop, the timestamps have obviously changed, and will thus cause my daily rsync backup to re-transfer all of the data. I thought that by adding the -c (checksum) switch to my rsync backup it would match files based on checksum, instead of timestamp and size, and only transfer those files that are different or not present. This appeared to work, but upon examining the new backup, hard links are not being created, and it appears the files that should be hard linked are simply being copied to the new backup directory from the previous backup directory on the backup server. This is very peculiar behavior to me, and I am having trouble figuring out why this is occurring. Checksums match for files that I think should be hard linked. I have looked through the rsync man page and Google'd around a bit and have been unable to find anything for me to better understand this behavior.

  Read the article

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• Computer making strange sound when turned on, ever since power outage

  - by Dot NET

  Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

  Read the article

• Mac OS X desktop background gets reset to "Andromeda Galaxy.jpg" when users log out

  - by smokris

  I'm running Mac OS 10.6 server, and have a set of 10.6 and 10.7 workstations connected to it for authentication and MCX. Users have network profiles (home folder stored on server, via AFP). When users are logged in, they can change their desktop background. So far so good. However, the next time they log in, their desktop background has been reset to "Andromeda Galaxy.jpg". Though MCX is enabled and used to control other settings, MCX is disabled for the Desktop. What is keeping the users' desktop background from being preserved? How can I fix it?

  Read the article

• Computer will not boot - disk read error - cannot boot from HD or DVD

  - by Grant Palin

  This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

  Read the article

• Powershell Get-Process cannot connect to remote computer

  - by amandion

  I've been struggling with this for a few hours and can't figure this out. I have two Windows 7 computers. One is my workstation that is using Powershell to do administrative maintenance. The other is the machine I'd like to use Powershell remoting on to execute remote Powershell cmdlets on. On both computers, I've enabled Powershell remoting and added all computers to TrustedHosts with the * value. On the remote computer, I've started the Remote registry service and ensured that the DCOM, Winmgmt and the Winrm services are running. Firewall is disabled on remote machine too. The cmdlet I try to run is: Get-Process -ComputerName $name Where $name is the name of the remote machine. I keep getting an error saying that it could not connect to the remote PC. I've also tried using the IP and I get the same error. These PCs are not in a domain. I am able to do the following successfully: Invoke-Command {get-Process} -ComputerName $name -Credential $creds Where $name is the machine name and $creds is the user name and password for the remote computer's local Admin account. This gives me the same output I would expect. While this is an acceptable workaround, I am curious, why doesn't using get-process with remoting work as it should? I've seen a few articles on the web suggesting people have had success with it on its own. Each time I am using Powershell on my workstation with elevated privileges. Any ideas?

  Read the article

• Some Portions of Computer Running Slow (Specifically Graphics)

  - by Mike Gates

  I noticed that a few things are running slow today on my Windows 7 laptop. Specifically, they are: Opening and closing windows takes several seconds for the animation to complete. Windows media player opens fine, but the movies are very laggy MMORPG's, such as RuneScape, are extremely laggy When waking my computer from sleep mode, after entering my password, my desktop takes about 3 seconds to fade in Other than those, everything runs at a normal speed. Things I've done that maybe contributed to this problem: Changed the graphics processor (by plugging in/unplugging the charger) [however, no matter how I change the graphics, I'm still getting this lagginess] Installed AdBlock, a Firefox addon [I recently removed it, and I'm still experiencing this problem] Went into Advanced System Settings, Clicked Settings, and unchecked a few visual things (such as the animation for opening and closing windows) [sure, this got rid of the opening/closing windows lag, but I like that little animation - plus that leaves all the other lag problems I'm experiencing] So, does anyone have any ideas/fixes? If so, please respond. Thank you. Some Other Information: I'm on a HP Pavillion dv7 laptop, 4285 Entertainment PC, with: intel CORE i5 inside, ATI Mobility Radeon Premium Graphics, Microsoft DirectX11 Opening and closing of windows: Defined as opening a program (i.e. Firefox) or closing it by hitting the X in the upper-right hand corner. Lately, the animation for opening and closing windows (which is simply either growing from the icon from the taskbar to fill the screen, or shrinking from the screen down towards the icon on the toolbar.) This problem also occurs for minimizing/maximizing windows. Very laggy movies: defined as .avi movie files saved to My Documents which skips several frames per second and seemingly slows down the movie as a whole Extremely laggy games: I tried RuneScape today, and movement in the game was at least 10x slower than it ever has been, even when playing on the lowest detail/graphics Desktop taking 3 seconds to fade in after sleep: in this scenario, I had no other programs running visibly. The computer generally fades to black from the password screen to the desktop in about 1 second, normally. However, it is now taking 3 or more seconds.

  Read the article

• How can I access my desktop computer from my Android phone?

  - by Qurben

  Is it possible to access a computer connected to the internet through an Android phone? (the internet goes through the phone by tethering) I want to use ssh to connect to the computer (from a different computer in the same network), but I am not able to access the computer. Is it possible to portforward, use some kind of transparent proxy or to use DMZ? My phone is rooted and I have Cyanogenmod installed and I can use iptables. EDIT: The changed title completely changed the question! My setup is the following: I have an android phone connected to a computer through the usb cable tethering internet from the phone, I wanted to ssh into the computer behind the android phone from another computer in the same network as the android phone. This was not possible, because the android phone creates a separate network for the connected computer, effectively shielding it from any incoming signals. It turned out to be quite simple to fix by just using iptables.

  Read the article

• Computer won't reboot without waiting for a while

  - by Benjamin

  I've got an unusual problem with my computer. When ever I reboot my computer it won't boot, I get a few beeps from the BIOS and nothing else, however if I wait for a few minuets the computer will boot perfectly. I tried to count the beeps and I get around 7-9 of them; the first two are noticeably closer together than the rest. [Edit: I'm now reasonably confident it's 1 long followed by 8 short beeps. That would be a display related issue: http://www.bioscentral.com/beepcodes/amibeep.htm] My BIOS is American Megatrends Inc and version P1.80, the Motherboard is an ASRock X58 Extreme (both according to dmidecode) Here's an output from LSPCI, I'm not sure what else might be useful but I can provide whatever's asked. 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller 02:00.1 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller (rev a0) 03:00.0 SATA controller: JMicron Technology Corp. JMB360 AHCI Controller (rev 02) 05:00.0 VGA compatible controller: nVidia Corporation GT200b [GeForce GTX 285] (rev a1) ff:00.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 (rev 05) ff:03.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller (rev 05) ff:03.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder (rev 05) ff:03.4 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers (rev 05) ff:04.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers (rev 05) ff:04.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers (rev 05) ff:04.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers (rev 05) ff:04.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers (rev 05) ff:05.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers (rev 05) ff:05.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers (rev 05) ff:05.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers (rev 05) ff:05.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers (rev 05) ff:06.0 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers (rev 05) ff:06.1 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers (rev 05) ff:06.2 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers (rev 05) ff:06.3 Host bridge: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers (rev 05) Update: ok I installed lm-sensors and here's the output. coretemp-isa-0000 Adapter: ISA adapter Core 0: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +59.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +80.0°C, crit = +100.0°C) it8720-isa-0a10 Adapter: ISA adapter in0: +0.93 V (min = +0.00 V, max = +4.08 V) in1: +0.06 V (min = +0.00 V, max = +4.08 V) in2: +3.25 V (min = +0.00 V, max = +4.08 V) +5V: +2.91 V (min = +0.00 V, max = +4.08 V) in4: +3.04 V (min = +0.00 V, max = +4.08 V) in5: +2.94 V (min = +0.00 V, max = +4.08 V) in6: +2.14 V (min = +0.00 V, max = +4.08 V) 5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) Vbat: +3.28 V fan1: 1869 RPM (min = 0 RPM) fan2: 0 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 1106 RPM (min = -1 RPM) fan5: 225000 RPM (min = -1 RPM) temp1: +39.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp2: +56.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor cpu0_vid: +1.650 V intrusion0: ALARM If it helps here's the summery from sensors-detect Driver `it87': * ISA bus, address 0xa10 Chip `ITE IT8720F Super IO Sensors' (confidence: 9) Driver `adt7475': * Bus `NVIDIA i2c adapter 3 at 5:00.0' Busdriver `nvidia', I2C address 0x2e Chip `Analog Devices ADT7473' (confidence: 5) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9)

  Read the article

• question about adding another column to a sql statement

  - by every_answer_gets_a_point

  i am starting with this table: SELECT [Lab Occurrence Form].[Practice Code], [Lab Occurrence Form].[1 0 Preanalytical (Before Testing)], Count([Lab Occurrence Form].[1 0 Preanalytical (Before Testing)]) AS [CountOf1 0 Preanalytical (Before Testing)] FROM [Lab Occurrence Form] WHERE ((([Lab Occurrence Form].[Occurrence Date]) Between [Forms]![By Number]![Text4] And [Forms]![By Number]![Text2])) GROUP BY [Lab Occurrence Form].[Practice Code], [Lab Occurrence Form].[1 0 Preanalytical (Before Testing)] HAVING ((([Lab Occurrence Form].[Practice Code])<>"") AND ((Count([Lab Occurrence Form].[1 0 Preanalytical (Before Testing)]))<>0)); it selects 3 columns but i need to aggregate the comments and put it in the fourth column where the first two values are the same

  Read the article

• Vista install works on one computer, but bluescreens another (on which Vista is known to work)

  - by Ken

  I hope my explanations make some sense -- please ask for clarification if they don't. I had a computer running Windows Vista (Ultimate, 64-bit). All was well! Then one day there was a nasty power surge at the office, and it died. (We didn't have surge protectors at the office, unfortunately. I assumed our lines were conditioned elsewhere, or was not an issue here. Oops.) After some testing, it was determined that the PSU, motherboard, and RAM were bad. While waiting for new hardware to arrive, I put my hard disk in a spare PC which had identical parts (mobo/CPU/RAM/PSU/video). Everything worked perfectly. The only way I could even tell it wasn't my computer is because Vista asked to re-activate itself with the new hardware, which worked fine, too. So the hard disk seems OK. Then the new parts arrived. The old motherboard model is no longer manufactured, so it's a new one with the same CPU/RAM/videocard/etc. slots. The PSU is also new, while the RAM I'm using is from the spare PC mentioned above. When I put it together and tried booting with my old hard disk, it starts to boot Windows, and then (fairly early in the process) gives a bluescreen and immediately reboots (so I can't see whatever the bluescreen is trying to tell me). I tried "safe mode", which also bluescreened. I tried booting the Vista DVD and running the repair utility, which found a Vista install, confirmed that it would not boot, and, eventually, declared that it was unable to repair it. I installed Vista fresh on a new hard disk, with the new mobo/etc., and it works perfectly. (That's what I'm running now.) I've also booted a Linux CD here, which ran great, and I've run Memtest86+ for a while, which found no errors. So all the hardware apart from the old hard disk seems OK, too. I don't think the problem is with my old Vista hard disk, since I used that with another mobo/CPU just fine. I don't think it's any other part of the new hardware, since I'm able to use it (and test it) with no trouble. It's just the combination of my old Vista install plus the new PC hardware that's not happy. I can get my data off my old hard disk and onto my new hard disk, and reinstall my apps, but it would be nice if I could fix things so I could continue to use my old hard disk as before. The latest hypothesis I've heard is that Vista had trouble with the new hardware (i.e., motherboard), but we have no idea what to do about that (except Safe Mode, which didn't work). Suggestions? Hypotheses for what's not right about this combination of Vista install and motherboard? Thanks!

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >