Search Results

Search found 1115 results on 45 pages for 'dos'.

Page 39/45 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45  | Next Page >

• Starting over and new to Ubuntu

  - by 2funnyyone

  We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

  Read the article

• Shrinking a Linux OEL 6 virtual Box image (vdi) hosted on Windows 7

  - by AndyBaker

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Recently for a customer demonstration there was a requirement to build a virtual box image with Oracle Enterprise Manager Cloud Control 12c. This meant installing OEL Linux 6 as well as creating an 11gr2 database and Oracle Enterprise Manager Cloud Control 12c on a single virtual box. Storage was sized at 300Gb using dynamically allocated storage for the virtual box and about 10Gb was used for Linux and the initial build. After copying over all the binaries and performing all the installations the virtual box became in the region of 80Gb used size on the host operating system, however internally it only really needed around 20Gb. This meant 60Gb had been used when copying over all the binaries and although now free was not returned to the host operating system due to the growth of the virtual box storage '.vdi' file.  Once the ‘vdi’ storage had grown it is not shrunk automatically afterwards. Space is always tight on the laptop so it was desirable to shrink the virtual box back to a minimal size and here is the process that was followed. Install 'zerofree' Linux package into the OEL6 virtual box The RPM was downloaded and installed from a site similar to below; http://rpm.pbone.net/index.php3/stat/4/idpl/12548724/com/zerofree-1.0.1-5.el5.i386.rpm.html A simple internet search for ’zerofree Linux rpm’ was easy to perform and find the required rpm. Execute 'zerofree' package on the desired Linux file system To execute this package the desired file system needs to be mounted read only. The following steps outline this process. As root: # umount /u01 As root:# mount –o ro –t ext4 /u01 NOTE: The –o is options and the –t is the file system type found in the /etc/fstab. Next run zerofree against the required storage, this is located by a simple ‘df –h’ command to see the device associated with the mount. As root:# zerofree –v /dev/sda11   NOTE: This takes a while to run but the ‘-v’ option gives feedback on the process. What does Zerofree do? Zerofree’s purpose is to go through the file system and zero out any unused sectors on the volume so that the later stages can shrink the virtual box storage obtaining the free space back. When zerofree has completed the virtual box can be shutdown as the last stage is performed on the physical host where the virtual box vdi files are located. Compact the virtual box ‘.vdi’ files The final stage is to get virtual box to shrink back the storage that has been correctly flagged as free space after executing zerofree. On the physical host in this case a windows 7 laptop a DOS window was opened. At the prompt the first step is to put the virtual box binaries onto the PATH. C:\ >echo %PATH%   The above shows the current value of the PATH environment variable. C:\ >set PATH=%PATH%;c:\program files\Oracle\Virtual Box;   The above adds onto the existing path the virtual box binary location. C:\>cd c:\Users\xxxx\OEL6.1   The above changes directory to where the VDI files are located for the required virtual box machine. C:\Users\xxxxx\OEL6.1>VBoxManage.exe modifyhd zzzzzz.vdi compact  NOTE: The zzzzzz.vdi is the name of the required vdi file to shrink. Finally the above command is executed to perform the compact operation on the ‘.vdi’ file(s). This also takes a long time to complete but shrinks the VDI file back to a minimum size. In the case of the demonstration virtual box OEM12c this reduced the virtual box to 20Gb from 80Gb which was a great outcome to achieve.

  Read the article

• What is the worst programming language you ever worked with? [closed]

  - by Ludwig Weinzierl

  If you have an interesting story to share, please post an answer, but do not abuse this question for bashing a language. We are programmers, and our primary tool is the programming language we use. While there is a lot of discussion about the best one, I'd like to hear your stories about the worst programming languages you ever worked with and I'd like to know exactly what annoyed you. I'd like to collect this stories partly to avoid common pitfalls while designing a language (especially a DSL) and partly to avoid quirky languages in the future in general. This question is not subjective. If a language supports only single character identifiers (see my own answer) this is bad in a non-debatable way. EDIT Some people have raised concerns that this question attracts trolls. Wading through all your answers made one thing clear. The large majority of answers is appropriate, useful and well written. UPDATE 2009-07-01 19:15 GMT The language overview is now complete, covering 103 different languages from 102 answers. I decided to be lax about what counts as a programming language and included anything reasonable. Thank you David for your comments on this. Here are all programming languages covered so far (alphabetical order, linked with answer, new entries in bold): ABAP, all 20th century languages, all drag and drop languages, all proprietary languages, APF, APL (1), AS400, Authorware, Autohotkey, BancaStar, BASIC, Bourne Shell, Brainfuck, C++, Centura Team Developer, Cobol (1), Cold Fusion, Coldfusion, CRM114, Crystal Syntax, CSS, Dataflex 2.3, DB/c DX, dbase II, DCL, Delphi IDE, Doors DXL, DOS batch (1), Excel Macro language, FileMaker, FOCUS, Forth, FORTRAN, FORTRAN 77, HTML, Illustra web blade, Informix 4th Generation Language, Informix Universal Server web blade, INTERCAL, Java, JavaScript (1), JCL (1), karol, LabTalk, Labview, Lingo, LISP, Logo, LOLCODE, LotusScript, m4, Magic II, Makefiles, MapBasic, MaxScript, Meditech Magic, MEL, mIRC Script, MS Access, MUMPS, Oberon, object extensions to C, Objective-C, OPS5, Oz, Perl (1), PHP, PL/SQL, PowerDynamo, PROGRESS 4GL, prova, PS-FOCUS, Python, Regular Expressions, RPG, RPG II, Scheme, ScriptMaker, sendmail.conf, Smalltalk, Smalltalk , SNOBOL, SpeedScript, Sybase PowerBuilder, Symbian C++, System RPL, TCL, TECO, The Visual Software Environment, Tiny praat, TransCAD, troff, uBasic, VB6 (1), VBScript (1), VDF4, Vimscript, Visual Basic (1), Visual C++, Visual Foxpro, VSE, Webspeed, XSLT The answers covering 80386 assembler, VB6 and VBScript have been removed.

  Read the article

• Emacs Lisp: how to set encoding for call-process

  - by RamyenHead

  I thought I knew how to set coding-system (or encoding): use process-coding-system-alist. Apparently, it's not working. ;; -*- coding: utf-8 -*- (require 'cl) (let ((process-coding-system-alist '("cygwin/bin/bash" . (utf-8-dos . utf-8-unix)))) (setq my-words (list "Lilo" "?_?" "_?" "?_" "?" "Stitch") my-cygwin-bash "C:/cygwin/bin/bash.exe" my-outbuf (get-buffer-create "*my cygwin bash echo test*") ) (with-current-buffer my-outbuf (goto-char (point-max)) (loop for word in my-words do (insert (concat "echo " word "\n")) (call-process my-cygwin-bash nil my-outbuf nil "-c" (concat "echo " word))) ) (display-buffer my-outbuf) ) Running the above code, the output is this: echo Lilo Lilo echo ?_? /usr/bin/bash: -c: line 0: unexpected EOF while looking for matching `"' /usr/bin/bash: -c: line 1: syntax error: unexpected end of file echo _? /usr/bin/bash: -c: line 0: unexpected EOF while looking for matching `"' /usr/bin/bash: -c: line 1: syntax error: unexpected end of file echo ?_ /usr/bin/bash: $'echo \346\267\205?': command not found echo ? /usr/bin/bash: -c: line 0: unexpected EOF while looking for matching `"' /usr/bin/bash: -c: line 1: syntax error: unexpected end of file echo Stitch Stitch Anything sent to cygwin in unicode is failing (MS Windows, Korean).

  Read the article

• program "is not up to date" execution error in wedit lcc-win32

  - by Rowhawn

  I'm attempting to compile a simple hello world program in c with lcc-win32/wedit, and i'm a little unfamiliar with windows c programming. #include int main(void){ printf("hellow\n"); return 0; } When I compile the program the console output is Wedit output window build: Tue Jun 15 09:13:17 2010 c:\lcc\lib\lcccrt0.obj .text: undefined reference to '_RtlUnwind@16' c:\lcc\lib\lcccrt0.obj .text: undefined reference to '_signal' c:\lcc\lib\lcccrt0.obj .text: undefined reference to '_raise' c:\lcc\lib\lcccrt0.obj .text: undefined reference to '_exit' asctoq.obj .text: undefined reference to '_strnicmp' defaulttrap.obj .text: undefined reference to 'imp_iob' defaulttrap.obj .text: undefined reference to '_fwrite' defaulttrap.obj .text: undefined reference to '_itoa' defaulttrap.obj .text: undefined reference to '_strcat' defaulttrap.obj .text: undefined reference to '_MessageBoxA@16' defaulttrap.obj .text: undefined reference to '_abort' powlasm.obj .text: undefined reference to '_pow' qfloat.obj .text: undefined reference to '_memset' qfloat.obj .text: undefined reference to '_strchr' qfloat.obj .text: undefined reference to '_memmove' strlcpy.obj .text: undefined reference to '_memcpy' xprintf.obj .text: undefined reference to '_localeconv' xprintf.obj .text: undefined reference to '_strtol' xprintf.obj .text: undefined reference to '_wcslen' xprintf.obj .text: undefined reference to '_wctomb' xprintf.obj .text: undefined reference to '_fputc' search Compilation + link time:0.1 sec, Return code: 60 when I attempt to execute the program within wedit i get a dialog box that says "hello.exe is not up-to-date. Rebuild?" If I click yes, nothing happens. If I click no, a dos window pops up saying "C:\lcc\projects\lcc2\hello.exe" Return code -1 Execution time 0.001 seconds Press any key to continue... This continues to happen no matter how many times i compile/rebuild. Any ideas?

  Read the article

• HttpWebRequest Timeouts After Ten Consecutive Requests

  - by Bob Mc

  I'm writing a web crawler for a specific site. The application is a VB.Net Windows Forms application that is not using multiple threads - each web request is consecutive. However, after ten successful page retrievals every successive request times out. I have reviewed the similar questions already posted here on SO, and have implemented the recommended techniques into my GetPage routine, shown below: Public Function GetPage(ByVal url As String) As String Dim result As String = String.Empty Dim uri As New Uri(url) Dim sp As ServicePoint = ServicePointManager.FindServicePoint(uri) sp.ConnectionLimit = 100 Dim request As HttpWebRequest = WebRequest.Create(uri) request.KeepAlive = False request.Timeout = 15000 Try Using response As HttpWebResponse = DirectCast(request.GetResponse, HttpWebResponse) Using dataStream As Stream = response.GetResponseStream() Using reader As New StreamReader(dataStream) If response.StatusCode <> HttpStatusCode.OK Then Throw New Exception("Got response status code: " + response.StatusCode) End If result = reader.ReadToEnd() End Using End Using response.Close() End Using Catch ex As Exception Dim msg As String = "Error reading page """ & url & """. " & ex.Message Logger.LogMessage(msg, LogOutputLevel.Diagnostics) End Try Return result End Function Have I missed something? Am I not closing or disposing of an object that should be? It seems strange that it always happens after ten consecutive requests. Notes: In the constructor for the class in which this method resides I have the following: ServicePointManager.DefaultConnectionLimit = 100 If I set KeepAlive to true, the timeouts begin after five requests. All the requests are for pages in the same domain. EDIT I added a delay between each web request of between two and seven seconds so that I do not appear to be "hammering" the site or attempting a DOS attack. However, the problem still occurs.

  Read the article

• how to implement login and service features as in skype or msn chat in a wpf application

  - by black sensei

  Hello Good people! I'm building an WPF application that connect to web services for its operations.Things that i needed to be working are so far fine.Now i'll like to improve use experience by adding features like username editable combobox, sign me in when skype start and start when computer start. I have a fair idea about each feature but very small knowledge about their implementation. Question 1 username combobox : i use a combobox with isEditable set to true but i think it doesnt have the previous username, would that mean that i have to store every successful login username in a sqlite for example? Question 2 sign me in when skype start : i think about using sqlite after all to store the credentials and store the value (as in true or false) if autologin has to be performed. Question 3 start when computer start : i know it's about having is as service.but the process of using it as a service and removing its service when checkbox is checked or unckecked is a bit confusing to me. Question 4 Please wait(signing in) of skype if i want to do things like please wait at login(login is over webservice) in a WPF application should i use a animated gif in a grid that i can show when hiding the login combobox and passwordbox grid or i should use an animated object(for which i have no knowledge about for now) ? This post in mainly for you experts to either point me to the right resource and tell me what is done as best practice. things like dos and dons.Thanks for reading this and please let me have a clair idea about how to start implementing those features. thanks again

  Read the article

• pattern matching in .Net consistent with IsolatedStorageFile.GetFileNames() pattern matching

  - by Mick N

  Is the pattern matching logic used by this API exposed for reuse somewhere in the .Net Framework? Something of the form FilePatternMatch( string searchPattern, stringfileNameToTest ) is what I'm looking for. I'm implementing a temporary workaround for WP7 not filtering the results for this overload and I'd like the solution to both provide a consistent experience and avoid reinventing this functionality if it is exposed. If the behaviour is not exposed for reuse, a regular expression solution (like glob pattern matching in .NET) will suffice and would save me spending the time to test the fine details of what the behaviour should be. Perhaps one of the answers posted in the thread linked above is correct. Since I haven't confirmed the exact behaviour as yet, I wasn't able to determine this at a glance. Feel free to point me to one of those answers if you know it is behaviouraly an exact match to the API referenced in the question title. I could assume the pattern matching is consistent with how DOS handled * and ? in 8.3 file names (I'm familiar with behavioural nuances of that implementation), but it's reasonable to assume Microsoft has evolved pattern matching behaviour for file names in the decade+ since so I thought I would check before proceeding on that assumption.

  Read the article

• How can I run a local Windows Application and have the output be piped into the Browser.

  - by Trey Sherrill

  I have Windows Application (.EXE file is written in C and built with MS-Visual Studio), that outputs ASCII text to stdout. I’m looking to enhance the ASCII text to include limited HTML with a few links. I’d like to invoke this application (.EXE File) and take the output of that application and pipe it into a Browser. This is not a one time thing, each new web page would be another run of the Local Application! The HTML/java-script application below has worked for me to execute the application, but the output has gone into a DOS Box windows and not to pipe it into the Browser. I’d like to update this HTML Application to enable the Browser to capture that text (that is enhanced with HTML) and display it with the browser. <body> <script> function go() { w = new ActiveXObject("WScript.Shell"); w.run('C:/DL/Browser/mk_html.exe'); return true; } </script> <form> Run My Application (Window with explorer only) <input type="button" value="Go" onClick="return go()"> </FORM> </body>

  Read the article

• Does anyone know how to detect whether a Windows Service is running through Java

  - by GKelly

  There's plenty of information on running Java apps as services, but I need to know how to detect whether a windows service is running or not. Does anyone know how??? At the DOS prompt, I can run: tasklist /svc|findstr "NonRunningService" echo Return code for N onRunningService is %ERRORLEVEL% tasklist /svc|findstr "RunningService" echo Return code for RunningService is %ERRORLEVEL% I get the following: Return code for NonRunningService is 1 Return code for RunningService is 0 In code, I have: int retCode = Runtime.getRuntime.exec("tasklist /svc|findstr \"NonRunningService\"").waitFor(); System.out.println("Return code for NonRunningService is " + retCode); retCode = Runtime.getRuntime.exec("tasklist /svc|findstr \"RunningService\"").waitFor(); System.out.println("Return code for RunningService is " + retCode); I get the following output Return code for NonRunningService is 1 Return code for RunningService is 1 According to the JavaDocs, the waitFor() should block until the process finishes, and give me the exit value of the process. I've also tried using the Process/ProcessBuilder command line calls: //'tasklist /nh /fi "SERVICES eq RunningService"' will return a line for // each running service of the requested type. Process p1 = new ProcessBuilder("tasklist", "/nh", "/fi" "SERVICES eq RunningService").start(); p1.waitFor(); BufferedReader is = new BufferedReader(new InputStreamReader(p1.getInputStream())); String line = is.readLine(); System.out.println("Service - " + line); System.out.println("Running? ", (line==null?"No":"Yes"); gives: Service - Running? No even when I get lines in the output at the command line!

  Read the article

• Ibator didn't generate Oracle varchar2 field

  - by bugbug

  I have table APP_REQ_APPROVE_COMPARE with following fields: "ID" NUMBER NOT NULL ENABLE, "TRACK_NO" VARCHAR2(20 BYTE) NOT NULL ENABLE, "REQ_DATE" DATE NOT NULL ENABLE, "OFFCODE" CHAR(6 BYTE) NOT NULL ENABLE, "COMPARE_CASE_ID" NUMBER NOT NULL ENABLE, "VEHICLE_NAME" VARCHAR2(100 BYTE), "ENGINE_NO" VARCHAR2(100 BYTE), "BODY_NO" VARCHAR2(100 BYTE), "HOLD_SHIP" NUMBER, "OWNERSHIP" VARCHAR2(200 BYTE), "RENT_NAME" VARCHAR2(200 BYTE), "CONTRACT" VARCHAR2(100 BYTE), "CONTRACT_NO" VARCHAR2(100 BYTE), "CONTRACT_DATE" DATE, "ISLAWBREAKERRENT" CHAR(1 BYTE) NOT NULL ENABLE, "MISTAKE_DETAIL" VARCHAR2(4000 BYTE), "COMPARE_REASON" VARCHAR2(4000 BYTE), "CREATE_BY" NUMBER NOT NULL ENABLE, "CREATE_ON" DATE DEFAULT SYSDATE NOT NULL ENABLE, "UPDATE_BY" NUMBER, "UPDATE_ON" DATE, When I generate a java bean using Ibator , I didn't find trackNo, VehicalName, ... (all fields defined as varchar2). What is the problem in my case? Here is my Ibator configuration file: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE ibatorConfiguration PUBLIC "-//Apache Software Foundation//DTD Apache iBATIS Ibator Configuration 1.0//EN" "http://ibatis.apache.org/dtd/ibator-config_1_0.dtd"> <ibatorConfiguration> <classPathEntry location="/dos/connector/oracle_jdbc.jar"/> <ibatorContext id="autoPerson" defaultModelType="flat" targetRuntime="Ibatis2Java2"> <jdbcConnection connectionURL="jdbc:oracle:thin:@192.168.42.144:1521:orcl" driverClass="oracle.jdbc.driver.OracleDriver" userId="user" password="password"/> <javaModelGenerator targetPackage="com.ko.model" targetProject="FormConfig"> <property name="enableSubPackages" value="true"/> <property name="trimStrings" value="true"/> </javaModelGenerator> <sqlMapGenerator targetPackage="com.ko.map" targetProject="FormConfig"> <property name="enableSubPackages" value="true"/> </sqlMapGenerator> <daoGenerator targetPackage="com.ko.model.dao" type="SPRING" targetProject="FormConfig" implementationPackage="com.ko.model.dao.impl" > <property name="enableSubPackges" value="true"/> <property name="methodNameCalculator" value="extended"/> </daoGenerator> <table tableName="APP_REQ_APPROVE_COMPARE" domainObjectName="AppReqApproveCompare"/> <ibatorConfiguration>

  Read the article

• Munging non-printable characters to dots using string.translate()

  - by Jim Dennis

  So I've done this before and it's a surprising ugly bit of code for such a seemingly simple task. The goal is to translate any non-printable character into a . (dot). For my purposes "printable" does exclude the last few characters from string.printable (new-lines, tabs, and so on). This is for printing things like the old MS-DOS debug "hex dump" format ... or anything similar to that (where additional whitespace will mangle the intended dump layout). I know I can use string.translate() and, to use that, I need a translation table. So I use string.maketrans() for that. Here's the best I could come up with: filter = string.maketrans( string.translate(string.maketrans('',''), string.maketrans('',''),string.printable[:-5]), '.'*len(string.translate(string.maketrans('',''), string.maketrans('',''),string.printable[:-5]))) ... which is an unreadable mess (though it does work). From there you can call use something like: for each_line in sometext: print string.translate(each_line, filter) ... and be happy. (So long as you don't look under the hood). Now it is more readable if I break that horrid expression into separate statements: ascii = string.maketrans('','') # The whole ASCII character set nonprintable = string.translate(ascii, ascii, string.printable[:-5]) # Optional delchars argument filter = string.maketrans(nonprintable, '.' * len(nonprintable)) And it's tempting to do that just for legibility. However, I keep thinking there has to be a more elegant way to express this!

  Read the article

• Hiding Command Prompt with CodeDomProvider

  - by j-t-s

  Hi All I've just got my own little custom c# compiler made, using the article from MSDN. But, when I create a new Windows Forms application using my sample compiler, the MSDOS window also appears, and if I close the DOS window, my WinForms app closes too. How can I tell the Compiler? not to show the MSDOS window at all? Thank you :) Here's my code: using System; namespace JTS { public class CSCompiler { protected string ot, rt, ss, es; protected bool rg, cg; public string Compile(String se, String fe, String[] rdas, String[] fs, Boolean rn) { System.CodeDom.Compiler.CodeDomProvider CODEPROV = System.CodeDom.Compiler.CodeDomProvider.CreateProvider("CSharp"); ot = fe; System.CodeDom.Compiler.CompilerParameters PARAMS = new System.CodeDom.Compiler.CompilerParameters(); // Ensure the compiler generates an EXE file, not a DLL. PARAMS.GenerateExecutable = true; PARAMS.OutputAssembly = ot; PARAMS.CompilerOptions = "/target:winexe"; PARAMS.ReferencedAssemblies.Add(typeof(System.Xml.Linq.Extensions).Assembly.Location); PARAMS.LinkedResources.Add("this.ico"); foreach (String ay in rdas) { if (ay.Contains(".dll")) PARAMS.ReferencedAssemblies.Add(ay); else { string refd = ay; refd = refd + ".dll"; PARAMS.ReferencedAssemblies.Add(refd); } } System.CodeDom.Compiler.CompilerResults rs = CODEPROV.CompileAssemblyFromFile(PARAMS, fs); if (rs.Errors.Count > 0) { foreach (System.CodeDom.Compiler.CompilerError COMERR in rs.Errors) { es = es + "Line number: " + COMERR.Line + ", Error number: " + COMERR.ErrorNumber + ", '" + COMERR.ErrorText + ";" + Environment.NewLine + Environment.NewLine; } } else { // Compilation succeeded. es = "Compilation Succeeded."; if (rn) System.Diagnostics.Process.Start(ot); } return es; } } }

  Read the article

• Hiding Command Prompt with CodeDomProvider

  - by j-t-s

  Hi All I've just got my own little custom c# compiler made, using the article from MSDN. But, when I create a new Windows Forms application using my sample compiler, the MSDOS window also appears, and if I close the DOS window, my WinForms app closes too. How can I tell the Compiler? not to show the MSDOS window at all? Thank you :) Here's my code: using System; namespace JTS { public class CSCompiler { protected string ot, rt, ss, es; protected bool rg, cg; public string Compile(String se, String fe, String[] rdas, String[] fs, Boolean rn) { System.CodeDom.Compiler.CodeDomProvider CODEPROV = System.CodeDom.Compiler.CodeDomProvider.CreateProvider("CSharp"); ot = fe; System.CodeDom.Compiler.CompilerParameters PARAMS = new System.CodeDom.Compiler.CompilerParameters(); // Ensure the compiler generates an EXE file, not a DLL. PARAMS.GenerateExecutable = true; PARAMS.OutputAssembly = ot; PARAMS.CompilerOptions = "/target:winexe"; PARAMS.ReferencedAssemblies.Add(typeof(System.Xml.Linq.Extensions).Assembly.Location); PARAMS.LinkedResources.Add("this.ico"); foreach (String ay in rdas) { if (ay.Contains(".dll")) PARAMS.ReferencedAssemblies.Add(ay); else { string refd = ay; refd = refd + ".dll"; PARAMS.ReferencedAssemblies.Add(refd); } } System.CodeDom.Compiler.CompilerResults rs = CODEPROV.CompileAssemblyFromFile(PARAMS, fs); if (rs.Errors.Count > 0) { foreach (System.CodeDom.Compiler.CompilerError COMERR in rs.Errors) { es = es + "Line number: " + COMERR.Line + ", Error number: " + COMERR.ErrorNumber + ", '" + COMERR.ErrorText + ";" + Environment.NewLine + Environment.NewLine; } } else { // Compilation succeeded. es = "Compilation Succeeded."; if (rn) System.Diagnostics.Process.Start(ot); } return es; } } }

  Read the article

• Windows Batch file to echo a specific line number

  - by Lee

  So for the second part of my current dilemma, I have a list of folders in c:\file_list.txt. I need to be able to extract them (well, echo them with some mods) based on the line number because this batch script is being called by an iterative macro process. I'm passing the line number as a parameter. @echo off setlocal enabledelayedexpansion set /a counter=0 set /a %%a = "" for /f "usebackq delims=" %%a in (c:\file_list.txt) do ( if "!counter!"=="%1" goto :printme & set /a counter+=1 ) :printme echo %%a which gives me an output of %a. Doh! So, I've tried echoing !a! (result: ECHO is off.); I've tried echoing %a (result: a) I figured the easy thing to do would be to modify the head.bat code found here: http://stackoverflow.com/questions/130116/dos-batch-commands-to-read-first-line-from-text-file except rather than echoing every line - I'd just echo the last line found. Not as simple as one might think. I've noticed that my counter is staying at zero for some reason; I'm wondering if the set /a counter+=1 is doing what I think it's doing.

  Read the article

• Why is there unreachable code here?

  - by Richard

  I am writing a c# app and want to output error messages to either the console or a messagebox (Depending on the app type: enum AppTypeChoice { Console, Windows } ), and also control wether the app keeps running or not ( bool StopOnError ). I came up with this method that will check all the criteria, but I'm getting an "unreachable code detected" warning. I can't see why! Here is the whole method (Brace yourselves for some hobbyist code!) public void OutputError(string message) { string standardMessage = "Something went WRONG!. [ But I'm not telling you what! ]"; string defaultMsgBoxTitle = "Aaaaarrrggggggggggg!!!!!"; string dosBoxOutput = "\n\n*** " + defaultMsgBoxTitle + " *** \n\n Message was: '" + message + "'\n\n"; AppTypeChoice appType = DataDefs.AppType; DebugLevelChoice level = DataDefs.DebugLevel; // Decide how much info we should give out here... if (level != DebugLevelChoice.None) { // Give some info.... if (appType == AppTypeChoice.Windows) MessageBox.Show(message, defaultMsgBoxTitle, MessageBoxButtons.OK, MessageBoxIcon.Error); else Console.WriteLine(dosBoxOutput); } else { // Be very secretive... if (appType == AppTypeChoice.Windows) MessageBox.Show(standardMessage, defaultMsgBoxTitle, MessageBoxButtons.OK, MessageBoxIcon.Error); else Console.WriteLine(standardMessage); } // Decide if app falls over or not.. if (DataDefs.StopOnError == true) Environment.Exit(0); // UNREACHABLE CODE HERE } Also, while I have your attention, to get the app type, I'm just using a constant at the top of the file (ie. AppTypeChoice.Console in a Console app etc) - is there a better way of doing this (i mean finding out in code if it is a DOS or Windows app)? Also, I noticed that I can use a messagebox with a fully-qualified path in a Console app...How bad is is to do that ( I mean, will I get tarred and feathered when other developers see it?!) Thanks for your help

  Read the article

• Help, my CentOS servers keep going down , No route to host after a random uptime [closed]

  - by user249071

  Hello , I have a couple of Centos linux servers, that have a very simple task, they run nginx + fastcgi for php , and some NFS mounts between them, readonly They have some RPC commands to start some downloading processes with wget, nothing fancy , from a main server, but their behavior is very unstable, they simply go down, we tried to monitor ram , processor usage, even network connections, they don't load up so much, max network connections up to... 250 max, 15% processor usage and memory , well, doesn't even fill up, 2.5GB from 8GB max , I have no ideea why can a linux server go down like that, they aren't even public servers, no domain names installed no public serving, for sites. The only thing that I've discovered was that if i didn't restart the network service every couple of hours or so... the servers were becoming very slow, starting apps very slow, but not repoting a high usage of resources...Maybe Centos doesn't free the timeout connections, or something like that...It's based on Red Hat right? I'm not a linux expert , but I'm sure that there are a few guys out there that can easily have an answer to this , or even have some leads to what i can do ... I haven't installed snort, or other things to view if we have some DOS attacks, still the scheduled script that restarts the network each hour should put the system back online, and it doesn't.... Thank you in advance

  Read the article

• How to make a small engine like Wolfram|Alpha?

  - by Koning WWWWWWWWWWWWWWWWWWWWWWW

  Lets say I have three models/tables: operating_systems, words, and programming_languages: # operating_systems name:string created_by:string family:string Windows Microsoft MS-DOS Mac OS X Apple UNIX Linux Linus Torvalds UNIX UNIX AT&T UNIX # words word:string defenitions:string window (serialized hash of defenitions) hello (serialized hash of defenitions) UNIX (serialized hash of defenitions) # programming_languages name:string created_by:string example_code:text C++ Bjarne Stroustrup #include <iostream> etc... HelloWorld Jeff Skeet h AnotherOne Jon Atwood imports 'SORULEZ.cs' etc... When a user searches hello, the system shows the defenitions of 'hello'. This is relatively easy to implement. However, when a user searches UNIX, the engine must choose: word or operating_system. Also, when a user searches windows (small letter 'w'), the engine chooses word, but should also show Assuming 'windows' is a word. Use as an <a href="etc..">operating system</a> instead. Can anyone point me in the right direction with parsing and choosing the topic of the search query? Thanks. Note: it doesn't need to be able to perform calculations as WA can do.

  Read the article

• Best terminal environment for Cygwin/Windows?

  - by Anders Sandvig

  Today I run Cygwin with rxvt using the following startup line: rxvt -bg black -sl 8192 -fg white -sr -g 150x56 -fn "Fixedsys" -e /usr/bin/bash --login -i This gives me a resizeable native Windows window which is much better than the standard "DOS box" the default cygwin.bat provides. However, the current configuration does have a couple of issues: I am not able to enter non-ASCII characters into the terminal window (i.e. æ, ø, å and Æ, Ø, Å, which I use semi-frequently. In fact, the terminal will not even accept them when I paste them into the window. If I paste a string like "bølle" (Norwegian for "bulley"), all I get is "blle". I am not able to render UTF-8 character, they only show as ?, even if they are supported by the font (i.e. when rendering the same characters in ISO-8859-1 they show just fine.). I am running English Windows Vista with locale and keyboard layout set to Norwegian (ISO-8859-1 character set?), but I've had the exact same issue on Windows 2000 and XP. Anyone knows how to fix this (i.e. a better way to configure rxvt)? Apart from the issues mentioned above, I'm very happy with rxvt, so if I find a way to resolve them I'd like to continue using it. However, if the issues are not (easily) solvable, are the any other good terminal solutions for Cygwin? Update The solution provided by Andy and Mattias (editing the .inputrc file) did solve the input problem, but output rendering is still an issue. Output is fine when I render in ISO-8859-1, but when using UTF-8 I only get ? for non-ASCII characters. This behavior is consistent between rxvt, urxvt (under Cygwin XFree X Server), mintty and PuttyCyg. Is there a similar configuration file where output encoding can be set (i.e. the equivalent of setting output locale on a Linux system)?

  Read the article

• Can't get syntax on to work in my gvim.

  - by user198553

  (I'm new to Linux and Vim, and I'm trying to learn Vim but I'm having some issues with it that I can't seen do fix) I'm in a Linux installation (Ubuntu 8.04) that I can't update, using Vim 7.1.138. My vim installation is in /usr/share/vim/vim71/. /home/user/ My .vimrc file is in /home/user/.vimrc, as follows: fun! MySys() return "linux" endfun set runtimepath=~/.vim,$VIMRUTNTIME source ~/.vim/.vimrc And then, in my /home/user/.vim/.vimrc: " =============== GENERAL CONFIG ============== set nocompatible syntax on " =============== ENCODING AND FILE TYPES ===== set encoding=utf8 set ffs=unix,dos,mac " =============== INDENTING =================== set ai " Automatically set the indent of a new line (local to buffer) set si " smartindent (local to buffer) " =============== FONT ======================== " Set font according to system if MySys() == "mac" set gfn=Bitstream\ Vera\ Sans\ Mono:h13 set shell=/bin/bash elseif MySys() == "windows" set gfn=Bitstream\ Vera\ Sans\ Mono:h10 elseif MySys() == "linux" set gfn=Inconsolata\ 14 set shell=/bin/bash endif " =============== COLORS ====================== colorscheme molokai " ============== PLUGINS ====================== " -------------- NERDTree --------------------- :noremap ,n :NERDTreeToggle<CR> " =============== DIRECTORIES ================= set backupdir=~/.backup/vim set directory=~/.swap/vim ...fact is the command syntax on is not working, neither in vim or gvim. And the strange thing is: If I try to set the syntax using the gvim toolbat, it works. Then, in normal mode in gvim, after activating using the toolbar, using the code :syntax off, it works, and just after doing this trying to do :syntax on doesn't work!! What's going on? Am I missing something?

  Read the article

• Load Spikes on a Apache MySQL Server with Wordpress MU

  - by Vikram Goyal

  Hi there, I am trying to investigate the reasons for some mysterious load spikes on a Linux Apache server (2.2.14) running PHP 5.2.9 on a dedicated server with enough processing power and memory. My primary web application is a Wordpress MU (2.9.2) installation. I have investigated and ruled out DOS attack, MySQL or Apache configuration issues. The log files don't give me anything of interest, except to tell me that there is severe load. The load (which can go up to 100) just seems to come and go. It helps that I have a script that checks every 3 minutes for the load, and restarts Apache. Restarting it helps, and the server comes back, till it happens again. There seems to be no set time frame, or visitor numbers on the site that can trigger this. Even a low number of concurrent visitors (20) can trigger it. I am almost convinced that there is a rewrite loop somewhere that is causing Apache to go mad. Apache is trying to serve something that is causing it to spawn more and more processes till it keels over. My question is: Given that I am convinced that this is a rewrite issue or something similar, how can I try and figure out what the issue is? What should I monitor? Apache logs are voluminous, and not very helpful. Of course, if this is not the issue, then at least knowing what to look for will help me eliminate this as an issue and look for something else. Thanks! Vikram

  Read the article

• What are the worst examples of moral failure in the history of software engineering?

  - by Amanda S

  Many computer science curricula include a class or at least a lecture on disasters caused by software bugs, such as the Therac-25 incidents or Ariane 5 Flight 501. Indeed, Wikipedia has a list of software bugs with serious consequences, and a question on StackOverflow addresses some of them too. We study the failures of the past so that we don't repeat them, and I believe that rather than ignoring them or excusing them, it's important to look at these failures squarely and remind ourselves exactly how the mistakes made by people in our profession cost real money and real lives. By studying failures caused by uncaught bugs and bad process, we learn certain lessons about rigorous testing and accountability, and we make sure that our innocent mistakes are caught before they cause major problems. There are kinds of less innocent failure in software engineering, however, and I think it's just as important to study the serious consequences caused by programmers motivated by malice, greed, or just plain amorality. Thus we can learn about the ethical questions that arise in our profession, and how to respond when we are faced with them ourselves. Unfortunately, it's much harder to find lists of these failures--the only one I can come up with is that apocryphal "DOS ain't done 'til Lotus won't run" story. What are the worst examples of moral failure in the history of software engineering?

  Read the article

• Android ADB has moved and Eclipse is looking in the old place

  - by Peter Nelson

  I did an SDK update last night and it moved adb.exe. In its place it left a file called "adb_has_moved.txt" saying The adb tool has moved to platform-tools/ If you don't see this directory in your SDK, launch the SDK and AVD Manager (execute the android tool) and install "Android SDK Platform-tools" Please also update your PATH environment variable to include the platform-tools/ directory, so you can execute adb from any location. So I did all that, including the PATH and now I can start adb.exe from any DOS prompt. But I still can't start it from Eclipse (Galileo 3.52). When I try it says Location of the Android SDK has not been set up in the preferences ... which is not true. The SDK IS set up in Preferences. The real problem is at the top of the Preferences window where it says "Could not find C:\SDK\android-sdk-windows\ tools \adb.exe!" ...No kidding - the update moved it to C:\SDK\android-sdk-windows\ platform-tools. Because it's specifying a specific (wrong) path Eclipse is bypassing the PATH variable. So how do I get Eclipse to look in the right place?

  Read the article

• .NET assembly not loading from NTVDM

  - by John Reid

  I have a VDD dll that's loaded by a DOS program running inside the NTVDM. This dll uses C++/CLI and references a .NET assembly. All in all, the loading process is something like this: NTVDM runs: prntsr.com which uses VDD RegisterModule to load: prnvdd.dll which references .NET assembly: prnlib.dll The prntsr.com, prnvdd.dll and prnlib.dll files are all in the same folder. However, when loading it, I get the following exception: Unhandled Exception: System.IO.FileNotFoundException: Could not load file or assembly 'PRNLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ecf23cee305e91b7' or one of its dependencies. The system cannot find the file specified. File name: 'PRNLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ecf23cee305e91b7' at VDD_Initialise() === Pre-bind state information === LOG: User = DOMAIN\user LOG: DisplayName = PRNLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ecf2 3cee305e91b7 (Fully-specified) LOG: Appbase = file:///C:/WINDOWS/system32/ LOG: Initial PrivatePath = NULL Calling assembly : (Unknown). === LOG: This bind starts in default load context. LOG: No application configuration file found. LOG: Using machine configuration file from C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\config\machine.config. LOG: Post-policy reference: PRNLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=ecf23cee305e91b7 LOG: Attempting download of new URL file:///C:/WINDOWS/system32/PRNLib.DLL. LOG: Attempting download of new URL file:///C:/WINDOWS/system32/PRNLib/PRNLib.DLL. LOG: Attempting download of new URL file:///C:/WINDOWS/system32/PRNLib.EXE. LOG: Attempting download of new URL file:///C:/WINDOWS/system32/PRNLib/PRNLib.EXE. It only searches C:\WINDOWS\system32\ for the assembly, which I guess this is due to NTVDM.EXE - as this is the actual process that the assembly is being loaded into, it takes its location as the AppBase. Any ideas how to change the AppBase or otherwise work around this problem?

  Read the article

• Extracting shell script from parameterised Hudson job

  - by Jonik

  I have a parameterised Hudson job, used for some AWS deployment stuff, which in one build step runs certain shell commands. However, that script has become sufficiently complicated that I want to "extract" it from Hudson to a separate script file, so that it can easily be versioned properly. The Hudson job would then simply update from VCS and execute the external script file. My main question is about passing parameters to the script. I have a Hudson parameter named AMI_ID and a few others. The script references those params as if they were environment variables: echo "Using AMI $AMI_ID and type $TYPE" Now, this works fine inside Hudson, but not if Hudson calls an external script. Could I somehow make Hudson set the params as environment variables so that I don't need to change the script? Or is my best option to alter the script to take command line parameters (and possibly assign those to named variables for readability: ami_id=$1; type=$2; ... )? I tried something like this but the script doesn't get correctly replaced values: export AMI_ID=$AMI_ID export TYPE=$TYPE external-script.sh # this tries to use e.g. $AMI_ID Bonus question: when the script is inside Hudson, the "console output" will contain both the executed commands and their output. This is extremely useful for debugging when something goes wrong with a build! For example, here the line starting with "+" is part of the script and the following line its output: + ec2-associate-address -K pk.pem -C cert.pem 77.125.116.139 -i i-aa3487fd ADDRESS 77.125.116.139 i-aa3487fd When calling an external script, Hudson output will only contain the latter line, making debugging harder. I could cat the script file to stdout before running it, but that's not optimal either. In effect, I'd like a kind of DOS-style "echo on" for the script which I'm calling from Hudson - anyone know a trick to achieve this?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45  | Next Page >