Search Results

Search found 1050 results on 42 pages for 'evaluate'.

Page 39/42 | < Previous Page | 35 36 37 38 39 40 41 42  | Next Page >

• Waterfall Model (SDLC) vs. Prototyping Model

  The characters in the fable of the Tortoise and the Hare can easily be used to demonstrate the similarities and differences between the Waterfall and Prototyping software development models. This children fable is about a race between a consistently slow moving but steadfast turtle and an extremely fast but unreliable rabbit. After closely comparing each character’s attributes in correlation with both software development models, a trend seems to appear in that the Waterfall closely resembles the Tortoise in that Waterfall Model is typically a slow moving process that is broken up in to multiple sequential steps that must be executed in a standard linear pattern. The Tortoise can be quoted several times in the story saying “Slow and steady wins the race.” This is the perfect mantra for the Waterfall Model in that this model is seen as a cumbersome and slow moving. Waterfall Model Phases Requirement Analysis & Definition This phase focuses on defining requirements for a project that is to be developed and determining if the project is even feasible. Requirements are collected by analyzing existing systems and functionality in correlation with the needs of the business and the desires of the end users. The desired output for this phase is a list of specific requirements from the business that are to be designed and implemented in the subsequent steps. In addition this phase is used to determine if any value will be gained by completing the project. System Design This phase focuses primarily on the actual architectural design of a system, and how it will interact within itself and with other existing applications. Projects at this level should be viewed at a high level so that actual implementation details are decided in the implementation phase. However major environmental decision like hardware and platform decision are typically decided in this phase. Furthermore the basic goal of this phase is to design an application at the system level in those classes, interfaces, and interactions are defined. Additionally decisions about scalability, distribution and reliability should also be considered for all decisions. The desired output for this phase is a functional  design document that states all of the architectural decisions that have been made in regards to the project as well as a diagrams like a sequence and class diagrams. Software Design This phase focuses primarily on the refining of the decisions found in the functional design document. Classes and interfaces are further broken down in to logical modules based on the interfaces and interactions previously indicated. The output of this phase is a formal design document. Implementation / Coding This phase focuses primarily on implementing the previously defined modules in to units of code. These units are developed independently are intergraded as the system is put together as part of a whole system. Software Integration & Verification This phase primarily focuses on testing each of the units of code developed as well as testing the system as a whole. There are basic types of testing at this phase and they include: Unit Test and Integration Test. Unit Test are built to test the functionality of a code unit to ensure that it preforms its desired task. Integration testing test the system as a whole because it focuses on results of combining specific units of code and validating it against expected results. The output of this phase is a test plan that includes test with expected results and actual results. System Verification This phase primarily focuses on testing the system as a whole in regards to the list of project requirements and desired operating environment. Operation & Maintenance his phase primarily focuses on handing off the competed project over to the customer so that they can verify that all of their requirements have been met based on their original requirements. This phase will also validate the correctness of their requirements and if any changed need to be made. In addition, any problems not resolved in the previous phase will be handled in this section. The Waterfall Model’s linear and sequential methodology does offer a project certain advantages and disadvantages. Advantages of the Waterfall Model Simplistic to implement and execute for projects and/or company wide Limited demand on resources Large emphasis on documentation Disadvantages of the Waterfall Model Completed phases cannot be revisited regardless if issues arise within a project Accurate requirement are never gather prior to the completion of the requirement phase due to the lack of clarification in regards to client’s desires. Small changes or errors that arise in applications may cause additional problems The client cannot change any requirements once the requirements phase has been completed leaving them no options for changes as they see their requirements changes as the customers desires change. Excess documentation Phases are cumbersome and slow moving Learn more about the Major Process in the Sofware Development Life Cycle and Waterfall Model. Conversely, the Hare shares similar traits with the prototyping software development model in that ideas are rapidly converted to basic working examples and subsequent changes are made to quickly align the project with customers desires as they are formulated and as software strays from the customers vision. The basic concept of prototyping is to eliminate the use of well-defined project requirements. Projects are allowed to grow as the customer needs and request grow. Projects are initially designed according to basic requirements and are refined as requirement become more refined. This process allows customer to feel their way around the application to ensure that they are developing exactly what they want in the application This model also works well for determining the feasibility of certain approaches in regards to an application. Prototypes allow for quickly developing examples of implementing specific functionality based on certain techniques. Advantages of Prototyping Active participation from users and customers Allows customers to change their mind in specifying requirements Customers get a better understanding of the system as it is developed Earlier bug/error detection Promotes communication with customers Prototype could be used as final production Reduced time needed to develop applications compared to the Waterfall method Disadvantages of Prototyping Promotes constantly redefining project requirements that cause major system rewrites Potential for increased complexity of a system as scope of the system expands Customer could believe the prototype as the working version. Implementation compromises could increase the complexity when applying updates and or application fixes When companies trying to decide between the Waterfall model and Prototype model they need to evaluate the benefits and disadvantages for both models. Typically smaller companies or projects that have major time constraints typically head for more of a Prototype model approach because it can reduce the time needed to complete the project because there is more of a focus on building a project and less on defining requirements and scope prior to the start of a project. On the other hand, Companies with well-defined requirements and time allowed to generate proper documentation should steer towards more of a waterfall model because they are in a position to obtain clarified requirements and have to design and optimal solution prior to the start of coding on a project.

  Read the article

• Varnish VCL - Regular Expression Evaluation

  - by Hugues ALARY

  I have been struggling for the past few days with this problem: Basically, I want to send to a client browser a cookie of the form foo[sha1oftheurl]=[randomvalue] if and only if the cookie has not already been set. e.g. If a client browser requests "/page.html", the HTTP response will be like: resp.http.Set-Cookie = "foo4c9ae249e9e061dd6e30893e03dc10a58cc40ee6=ABCD;" then, if the same client request "/index.html", the HTTP response will contain a header: resp.http.Set-Cookie = "foo14fe4559026d4c5b5eb530ee70300c52d99e70d7=QWERTY;" In the end, the client browser will have 2 cookies: foo4c9ae249e9e061dd6e30893e03dc10a58cc40ee6=ABCD foo14fe4559026d4c5b5eb530ee70300c52d99e70d7=QWERTY Now, that, is not complicated in itself. The following code does it: import digest; import random; ##This vmod does not exist, it's just for the example. sub vcl_recv() { ## We compute the sha1 of the requested URL and store it in req.http.Url-Sha1 set req.http.Url-Sha1 = digest.hash_sha1(req.url); set req.http.random-value = random.get_rand(); } sub vcl_deliver() { ## We create a cookie on the client browser by creating a "Set-Cookie" header ## In our case the cookie we create is of the form foo[sha1]=[randomvalue] ## e.g for a URL "/page.html" the cookie will be foo4c9ae249e9e061dd6e30893e03dc10a58cc40ee6=[randomvalue] set resp.http.Set-Cookie = {""} + resp.http.Set-Cookie + "foo"+req.http.Url-Sha1+"="+req.http.random-value; } However, this code does not take into account the case where the Cookie already exists. I need to check that the Cookie does not exists before generating a random value. So I thought about this code: import digest; import random; sub vcl_recv() { ## We compute the sha1 of the requested URL and store it in req.http.Url-Sha1 set req.http.Url-Sha1 = digest.hash_sha1(req.url); set req.http.random-value = random.get_rand(); set req.http.regex = "abtest"+req.http.Url-Sha1; if(!req.http.Cookie ~ req.http.regex) { set req.http.random-value = random.get_rand(); } } The problem is that Varnish does not compute Regular expression at run time. Which leads to this error when I try to compile: Message from VCC-compiler: Expected CSTR got 'req.http.regex' (program line 940), at ('input' Line 42 Pos 31) if(req.http.Cookie !~ req.http.regex) { ------------------------------##############--- Running VCC-compiler failed, exit 1 VCL compilation failed One could propose to solve my problem by matching on the "abtest" part of the cookie or even "abtest[a-fA-F0-9]{40}": if(!req.http.Cookie ~ "abtest[a-fA-F0-9]{40}") { set req.http.random-value = random.get_rand(); } But this code matches any cookie starting by 'abtest' and containing an hexadecimal string of 40 characters. Which means that if a client requests "/page.html" first, then "/index.html", the condition will evaluate to true even if the cookie for the "/index.html" has not been set. I found in bug report phk or someone else stating that computing regular expressions was extremely expensive which is why they are evaluated during compilation. Considering this, I believe that there is no way of achieving what I want the way I've been trying to. Is there any way of solving this problem, other than writting a vmod? Thanks for your help! -Hugues

  Read the article

• C#/.NET Little Wonders: Comparer&lt;T&gt;.Default

  - by James Michael Hare

  I’ve been working with a wonderful team on a major release where I work, which has had the side-effect of occupying most of my spare time preparing, testing, and monitoring.  However, I do have this Little Wonder tidbit to offer today. Introduction The IComparable<T> interface is great for implementing a natural order for a data type.  It’s a very simple interface with a single method: 1: public interface IComparer<in T> 2: { 3: // Compare two instances of same type. 4: int Compare(T x, T y); 5: }  So what do we expect for the integer return value?  It’s a pseudo-relative measure of the ordering of x and y, which returns an integer value in much the same way C++ returns an integer result from the strcmp() c-style string comparison function: If x == y, returns 0. If x > y, returns > 0 (often +1, but not guaranteed) If x < y, returns < 0 (often –1, but not guaranteed) Notice that the comparison operator used to evaluate against zero should be the same comparison operator you’d use as the comparison operator between x and y.  That is, if you want to see if x > y you’d see if the result > 0. The Problem: Comparing With null Can Be Messy This gets tricky though when you have null arguments.  According to the MSDN, a null value should be considered equal to a null value, and a null value should be less than a non-null value.  So taking this into account we’d expect this instead: If x == y (or both null), return 0. If x > y (or y only is null), return > 0. If x < y (or x only is null), return < 0. But here’s the problem – if x is null, what happens when we attempt to call CompareTo() off of x? 1: // what happens if x is null? 2: x.CompareTo(y); It’s pretty obvious we’ll get a NullReferenceException here.  Now, we could guard against this before calling CompareTo(): 1: int result; 2:  3: // first check to see if lhs is null. 4: if (x == null) 5: { 6: // if lhs null, check rhs to decide on return value. 7: if (y == null) 8: { 9: result = 0; 10: } 11: else 12: { 13: result = -1; 14: } 15: } 16: else 17: { 18: // CompareTo() should handle a null y correctly and return > 0 if so. 19: result = x.CompareTo(y); 20: } Of course, we could shorten this with the ternary operator (?:), but even then it’s ugly repetitive code: 1: int result = (x == null) 2: ? ((y == null) ? 0 : -1) 3: : x.CompareTo(y); Fortunately, the null issues can be cleaned up by drafting in an external Comparer.  The Soltuion: Comparer<T>.Default You can always develop your own instance of IComparer<T> for the job of comparing two items of the same type.  The nice thing about a IComparer is its is independent of the things you are comparing, so this makes it great for comparing in an alternative order to the natural order of items, or when one or both of the items may be null. 1: public class NullableIntComparer : IComparer<int?> 2: { 3: public int Compare(int? x, int? y) 4: { 5: return (x == null) 6: ? ((y == null) ? 0 : -1) 7: : x.Value.CompareTo(y); 8: } 9: }  Now, if you want a custom sort -- especially on large-grained objects with different possible sort fields -- this is the best option you have.  But if you just want to take advantage of the natural ordering of the type, there is an easier way.  If the type you want to compare already implements IComparable<T> or if the type is System.Nullable<T> where T implements IComparable, there is a class in the System.Collections.Generic namespace called Comparer<T> which exposes a property called Default that will create a singleton that represents the default comparer for items of that type.  For example: 1: // compares integers 2: var intComparer = Comparer<int>.Default; 3:  4: // compares DateTime values 5: var dateTimeComparer = Comparer<DateTime>.Default; 6:  7: // compares nullable doubles using the null rules! 8: var nullableDoubleComparer = Comparer<double?>.Default;  This helps you avoid having to remember the messy null logic and makes it to compare objects where you don’t know if one or more of the values is null. This works especially well when creating say an IComparer<T> implementation for a large-grained class that may or may not contain a field.  For example, let’s say you want to create a sorting comparer for a stock open price, but if the market the stock is trading in hasn’t opened yet, the open price will be null.  We could handle this (assuming a reasonable Quote definition) like: 1: public class Quote 2: { 3: // the opening price of the symbol quoted 4: public double? Open { get; set; } 5:  6: // ticker symbol 7: public string Symbol { get; set; } 8:  9: // etc. 10: } 11:  12: public class OpenPriceQuoteComparer : IComparer<Quote> 13: { 14: // Compares two quotes by opening price 15: public int Compare(Quote x, Quote y) 16: { 17: return Comparer<double?>.Default.Compare(x.Open, y.Open); 18: } 19: } Summary Defining a custom comparer is often needed for non-natural ordering or defining alternative orderings, but when you just want to compare two items that are IComparable<T> and account for null behavior, you can use the Comparer<T>.Default comparer generator and you’ll never have to worry about correct null value sorting again.     Technorati Tags: C#,.NET,Little Wonders,BlackRabbitCoder,IComparable,Comparer

  Read the article

• Benchmarking MySQL Replication with Multi-Threaded Slaves

  - by Mat Keep

  0 0 1 1145 6530 Homework 54 15 7660 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} The objective of this benchmark is to measure the performance improvement achieved when enabling the Multi-Threaded Slave enhancement delivered as a part MySQL 5.6. As the results demonstrate, Multi-Threaded Slaves delivers 5x higher replication performance based on a configuration with 10 databases/schemas. For real-world deployments, higher replication performance directly translates to: · Improved consistency of reads from slaves (i.e. reduced risk of reading "stale" data) · Reduced risk of data loss should the master fail before replicating all events in its binary log (binlog) The multi-threaded slave splits processing between worker threads based on schema, allowing updates to be applied in parallel, rather than sequentially. This delivers benefits to those workloads that isolate application data using databases - e.g. multi-tenant systems deployed in cloud environments. Multi-Threaded Slaves are just one of many enhancements to replication previewed as part of the MySQL 5.6 Development Release, which include: · Global Transaction Identifiers coupled with MySQL utilities for automatic failover / switchover and slave promotion · Crash Safe Slaves and Binlog · Optimized Row Based Replication · Replication Event Checksums · Time Delayed Replication These and many more are discussed in the “MySQL 5.6 Replication: Enabling the Next Generation of Web & Cloud Services” Developer Zone article  Back to the benchmark - details are as follows. Environment The test environment consisted of two Linux servers: · one running the replication master · one running the replication slave. Only the slave was involved in the actual measurements, and was based on the following configuration: - Hardware: Oracle Sun Fire X4170 M2 Server - CPU: 2 sockets, 6 cores with hyper-threading, 2930 MHz. - OS: 64-bit Oracle Enterprise Linux 6.1 - Memory: 48 GB Test Procedure Initial Setup: Two MySQL servers were started on two different hosts, configured as replication master and slave. 10 sysbench schemas were created, each with a single table: CREATE TABLE `sbtest` (    `id` int(10) unsigned NOT NULL AUTO_INCREMENT,    `k` int(10) unsigned NOT NULL DEFAULT '0',    `c` char(120) NOT NULL DEFAULT '',    `pad` char(60) NOT NULL DEFAULT '',    PRIMARY KEY (`id`),    KEY `k` (`k`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 10,000 rows were inserted in each of the 10 tables, for a total of 100,000 rows. When the inserts had replicated to the slave, the slave threads were stopped. The slave data directory was copied to a backup location and the slave threads position in the master binlog noted. 10 sysbench clients, each configured with 10 threads, were spawned at the same time to generate a random schema load against each of the 10 schemas on the master. Each sysbench client executed 10,000 "update key" statements: UPDATE sbtest set k=k+1 WHERE id = <random row> In total, this generated 100,000 update statements to later replicate during the test itself. Test Methodology: The number of slave workers to test with was configured using: SET GLOBAL slave_parallel_workers=<workers> Then the slave IO thread was started and the test waited for all the update queries to be copied over to the relay log on the slave. The benchmark clock was started and then the slave SQL thread was started. The test waited for the slave SQL thread to finish executing the 100k update queries, doing "select master_pos_wait()". When master_pos_wait() returned, the benchmark clock was stopped and the duration calculated. The calculated duration from the benchmark clock should be close to the time it took for the SQL thread to execute the 100,000 update queries. The 100k queries divided by this duration gave the benchmark metric, reported as Queries Per Second (QPS). Test Reset: The test-reset cycle was implemented as follows: · the slave was stopped · the slave data directory replaced with the previous backup · the slave restarted with the slave threads replication pointer repositioned to the point before the update queries in the binlog. The test could then be repeated with identical set of queries but a different number of slave worker threads, enabling a fair comparison. The Test-Reset cycle was repeated 3 times for 0-24 number of workers and the QPS metric calculated and averaged for each worker count. MySQL Configuration The relevant configuration settings used for MySQL are as follows: binlog-format=STATEMENT relay-log-info-repository=TABLE master-info-repository=TABLE As described in the test procedure, the slave_parallel_workers setting was modified as part of the test logic. The consequence of changing this setting is: 0 worker threads:    - current (i.e. single threaded) sequential mode    - 1 x IO thread and 1 x SQL thread    - SQL thread both reads and executes the events 1 worker thread:    - sequential mode    - 1 x IO thread, 1 x Coordinator SQL thread and 1 x Worker thread    - coordinator reads the event and hands it to the worker who executes 2+ worker threads:    - parallel execution    - 1 x IO thread, 1 x Coordinator SQL thread and 2+ Worker threads    - coordinator reads events and hands them to the workers who execute them Results Figure 1 below shows that Multi-Threaded Slaves deliver ~5x higher replication performance when configured with 10 worker threads, with the load evenly distributed across our 10 x schemas. This result is compared to the current replication implementation which is based on a single SQL thread only (i.e. zero worker threads). Figure 1: 5x Higher Performance with Multi-Threaded Slaves The following figure shows more detailed results, with QPS sampled and reported as the worker threads are incremented. The raw numbers behind this graph are reported in the Appendix section of this post. Figure 2: Detailed Results As the results above show, the configuration does not scale noticably from 5 to 9 worker threads. When configured with 10 worker threads however, scalability increases significantly. The conclusion therefore is that it is desirable to configure the same number of worker threads as schemas. Other conclusions from the results: · Running with 1 worker compared to zero workers just introduces overhead without the benefit of parallel execution. · As expected, having more workers than schemas adds no visible benefit. Aside from what is shown in the results above, testing also demonstrated that the following settings had a very positive effect on slave performance: relay-log-info-repository=TABLE master-info-repository=TABLE For 5+ workers, it was up to 2.3 times as fast to run with TABLE compared to FILE. Conclusion As the results demonstrate, Multi-Threaded Slaves deliver significant performance increases to MySQL replication when handling multiple schemas. This, and the other replication enhancements introduced in MySQL 5.6 are fully available for you to download and evaluate now from the MySQL Developer site (select Development Release tab). You can learn more about MySQL 5.6 from the documentation  Please don’t hesitate to comment on this or other replication blogs with feedback and questions. Appendix – Detailed Results

  Read the article

• first install for windows eight.....da beta

  - by raysmithequip

  The W8 preview is now installed and I am enjoying it.  I remember the learning curve of my first unix machine back in the eighties, this ain't that.It is normal for me to do the first os install with a keyboard and low end monitor...you never know what you'll encounter out in the field.  The OS took like a fish to water.  I used a low end INTEL motherboard dp55w I gathered on the cheap, an 1157 i5 from the used bin a pair of 6 gig ddr3 sticks, a rosewell 550 watt power supply a cheap used twenty buck sub 200g wd sata drive, a half working dvd burner and an asus fanless nvidia vid card, not a great one but Sub 50.00 on newey eggey...I did have to hunt the ms forums for a key and of course to activate the thing, if dos would of needed this outmoded ritual, we would still be on cpm and osborne would be a household name, of course little do people know that this ritual was common as far back as the seventies on att unix installs....not, but it was possible, I used to joke about when I ran a bbs, what hell would of been wrought had dos 3.2 machines been required to dial into my bbs to send fido mail to ms and wait for an acknowledgement.  All in all the thing was pushing a seven on the ms richter scale, not including the vid card, sadly it came in at just a tad over three....I wanted to evaluate it for a possible replacement on critical machines that in the past went down due to a vid card fan failure....you have no idea what a customer thinks when you show them a failed vid card fan..."you mean that little plastic piece of junk caused all this!!??!!!"...yea man.  Some production machines don't need any sort of vid, I will at least keep it on the maybe list for those, MTBF is a very important factor, some big box stores should put percentage of failure rate within 24 month estimates on the outside of the carton for sure.  And a warning that the power supplies are already at their limit.  Let's face it, today even 550w can be iffy.A few neat eye candy improvements over the earlier windows is nice, the metro screen is nice, anyone who has used a newer phone recently will intuitively drag their fingers across the screen....lot of good that was with no mouse or touch screen though.  Lucky me, I have been using windows since day one, I still have a copy of win 2.0 (and every other version) for no good reason.  Still the old ix collection of disks is much larger, recompiling any kernal is another silly ritual, same machine, different day, same recompile...argh. Rh is my all time fav, mandrake was always missing something, like it rewrote the init file or something, novell is ok as long as you stay on the beaten path and of course ubuntu normally recompiles with the same errors consistantly....makes life easy that way....no errors on windows eight, just a screen that did not match the installed hardware, natuarally I alt tabbed right out of it, then hit the flag key to find the start menu....no start button. I miss the start button already. Keyboard cowboy funnin and I was browsing the harddrive, nothing stunning there, I like that, means I can find stuff. Only I can't find what I want, the start button....the start menu is that first screen for touch tablets. No biggie for useruser, that is where they will want to be, I can see that. Admins won't want to be there, it is easy enough to get the control panel a bazzilion other ways though, just not the start button. (see a pattern here?). Personally, from the keyboard I find it fun to hit the carets along the location bar at the top of the explorer screen with tabs and arrows and choose SHOW ALL CONTROL PANEL ITEMS, or thereabouts. Bottom line, I love seven and I'll love eight even more!...very happy I did not have to follow the normal rule of thumb (a customer watching me build a system and asking questions said "oh I get it, so every piece you put in there is basically a hundred bucks, right?)...ok, sure, pretty much, more or less, well, ya dude.  It will be WAY past october till I get a real touch screen but I did pick up a pair of cheap tatungs so I can try the NEW main start screen, I parse a lot of folders and have a vision of how a pair of touch screens will be easier than landing a rover on mars.  Ok.  fine, they are way smallish, and I don't expect multitouch to work but we are talking a few percent of a new 21 inch viewsonic touch screen.  Will this OS be a game changer?  I don't know.  Bottom line with all the pads and droids in the world, it is more of a catch up move at first glance.  Not something ms is used to.  An app store?  I can see ms's motivation, the others have it.  I gather there will not be gadgets there, go ahead and see what ms did  to the once populated gadget page...go ahead, google gadgets and take a gander, used to hundreds of gadgets, they are already gone.  They replaced gadgets?  sort of, I'll drop that, it's a bit of a sore point for me.  More of interest was what happened when I downloaded stuff off codeplex and some other normal programs that I like, like orbitron, top o' my list!!...cardware it is...anyways, click on the exe, get a screen, normal for windows, this one indicated that I was not running a normal windows program and had a button for  exit the install, naw, I hit details, a hidden run program anyways came into view....great, my path to the normal windows has detected a program tha.....yea ok, acl is on, fine, moving along I got orbitron installed in record time and was tracking the iss on the newest Microsoft OS, beta of course, felt like the first time I setup bsd all those year ago...FUN!!...I suppose I gotta start to think about budgeting for the real os when it comes out in october, by then I should have a rasberry pi and be done with fedora remixed.  Of course that sounds like fun too!!  I would use this OS on a tablet or phone.  I don't like the idea of being hearded to an app store, don't like that on anything, we are americans and want real choices not marketed hype, lest you are younger with opm (other peoples money).   This os would be neat on a zune, but I suspect the zune is a gonner, I am rooting for microsoft, after all their default password is not admin anymore, nor alpine,  it's blank. Others force a password, my first fawn password was so long I could not even log into it with the password in front of me, who the heck uses %$# anyways, and if I was writing a brute force attack what the heck kinda impasse is that anyways at .00001 microseconds of a code execution cycle (just a non qualified number, not a real clock speed)....AI is where it will be before too long, MS is on that path, perhaps soon someone will sit down and write an app for the kinect that watches your eyes while you scan the new main start screen, clicking on the big E icon when you blink.....boy is that going to be fun!!!! sure. Blink,dammit,blink,dammit...... OPM no doubt.I like windows eight, we are moving forwards, better keep a close eye on ubuntu.  The real clinch comes when open source becomes paid source......don't blink, I already see plenty of very expensive 'ix apps, some even in app stores already.  more to come.......

  Read the article

• Possible SWITCH Optimization in DAX – #powerpivot #dax #tabular

  - by Marco Russo (SQLBI)

  In one of the Advanced DAX Workshop I taught this year, I had an interesting discussion about how to optimize a SWITCH statement (which could be frequently used checking a slicer, like in the Parameter Table pattern). Let’s start with the problem. What happen when you have such a statement? Sales :=     SWITCH (         VALUES ( Period[Period] ),         "Current", [Internet Total Sales],         "MTD", [MTD Sales],         "QTD", [QTD Sales],         "YTD", [YTD Sales],          BLANK ()     ) The SWITCH statement is in reality just syntax sugar for a nested IF statement. When you place such a measure in a pivot table, for every cell of the pivot table the IF options are evaluated. In order to optimize performance, the DAX engine usually does not compute cell-by-cell, but tries to compute the values in bulk-mode. However, if a measure contains an IF statement, every cell might have a different execution path, so the current implementation might evaluate all the possible IF branches in bulk-mode, so that for every cell the result from one of the branches will be already available in a pre-calculated dataset. The price for that could be high. If you consider the previous Sales measure, the YTD Sales measure could be evaluated for all the cells where it’s not required, and also when YTD is not selected at all in a Pivot Table. The actual optimization made by the DAX engine could be different in every build, and I expect newer builds of Tabular and Power Pivot to be better than older ones. However, we still don’t live in an ideal world, so it could be better trying to help the engine finding a better execution plan. One student (Niek de Wit) proposed this approach: Selection := IF (     HASONEVALUE ( Period[Period] ),     VALUES ( Period[Period] ) ) Sales := CALCULATE (     [Internet Total Sales],     FILTER (         VALUES ( 'Internet Sales'[Order Quantity] ),         'Internet Sales'[Order Quantity]             = IF (                 [Selection] = "Current",                 'Internet Sales'[Order Quantity],                 -1             )     ) )     + CALCULATE (         [MTD Sales],         FILTER (             VALUES ( 'Internet Sales'[Order Quantity] ),             'Internet Sales'[Order Quantity]                 = IF (                     [Selection] = "MTD",                     'Internet Sales'[Order Quantity],                     -1                 )         )     )     + CALCULATE (         [QTD Sales],         FILTER (             VALUES ( 'Internet Sales'[Order Quantity] ),             'Internet Sales'[Order Quantity]                 = IF (                     [Selection] = "QTD",                     'Internet Sales'[Order Quantity],                     -1                 )         )     )     + CALCULATE (         [YTD Sales],         FILTER (             VALUES ( 'Internet Sales'[Order Quantity] ),             'Internet Sales'[Order Quantity]                 = IF (                     [Selection] = "YTD",                     'Internet Sales'[Order Quantity],                     -1                 )         )     ) At first sight, you might think it’s impossible that this approach could be faster. However, if you examine with the profiler what happens, there is a different story. Every original IF’s execution branch is now a separate CALCULATE statement, which applies a filter that does not execute the required measure calculation if the result of the FILTER is empty. I used the ‘Internet Sales’[Order Quantity] column in this example just because in Adventure Works it has only one value (every row has 1): in the real world, you should use a column that has a very low number of distinct values, or use a column that has always the same value for every row (so it will be compressed very well!). Because the value –1 is never used in this column, the IF comparison in the filter discharge all the values iterated in the filter if the selection does not match with the desired value. I hope to have time in the future to write a longer article about this optimization technique, but in the meantime I’ve seen this optimization has been useful in many other implementations. Please write your feedback if you find scenarios (in both Power Pivot and Tabular) where you obtain performance improvements using this technique!

  Read the article

• How I Work: Staying Productive Whilst Traveling

  - by BuckWoody

  I travel a lot. Not like some folks that are gone every week, mind you, although in the last month I’ve been to: Cambridge, UK; Anchorage, AK; San Jose, CA; Copenhagen, DK, Boston, MA; and I’m currently en-route to Anaheim, CA.  While this many places in a month is a bit unusual for me, I would say I travel frequently. I’ve travelled most of my 28+ years in IT, and at one time was a consultant traveling weekly.   With that much time away from my primary work location, I have to find ways to stay productive. Some might say “just rest – take a nap!” – but I’m not able to do that. For one thing, I’m a very light sleeper and I’ve never slept on a plane - even a 30+ hour trip to New Zealand in Business Class - so that just isn’t option. I also am not always in the plane, of course. There’s the hotel, the taxi/bus/train, the airport and then all that over again when I arrive. Since my regular jobs have many demands, I have to get work done.   Note: No, I’m not always focused on work. I need downtime just like everyone else. Sometimes I just think, watch a movie or listen to tunes – and I give myself permission to do that anytime – sometimes the whole trip. I have too fewheartbeats left in life to only focus on work – it’s just not that important, and neither am I. Some of these tasks are letters to friends and family, or other personal things. What I’m talking about here is a plan, not some task list I have to follow. When I get to the location I’m traveling to, I always build in as much time as I can to ensure I enjoy those sights and the people I’m with. I would find traveling to be a waste if not for that.   The Unrealistic Expectation As I would evaluate the trip I was taking – say a 6-8 hour flight – I would expect to get 10-12 hours of work done. After all, there’s the time at the airport, the taxi and so on, and then of course the time in the air with all of the room, power, internet and everything else I needed to get my work done. I would pile up tasks at home, pack my bags, and head happily to the magical land of the TSA.   Right. On return from the trip, I had accomplished little, had more e-mails and other work that had piled up, and I was tired, hungry, and unorganized. This had to change. So, I decided to do three things: Segment my work Set realistic expectations Plan accordingly  Segmenting By Available Resources The first task was to decide what kind of work I could do in each location – if any. I found that I was dependent on a few things to get work done, such as power, the Internet, and a place to sit down. Before I fly, I take some time at home to get all of the work I’d like to accomplish while away segmented into these areas, and print that out on paper, which goes in my suit-coat pocket along with a mechanical pencil. I print my tickets, and I’m all set for the adventure ahead. Then I simply do each kind of work whenever I’m in that situation. No power There are certain times when I don’t have power available. But not only that, I might not even be able to use most of my electronics. So I now schedule as many phone calls as I can for the taxi/bus/train ride and the airports as I can. I have a paper notebook (Moleskine, of course) and a pencil and I print out any notes or numbers I need prior to the trip. Once I’m airborne or at the airport, I work on my laptop. I check and respond to e-mails, create slides, write code, do architecture, whatever I can.  If I can’t use any electronics, or once the power runs out, I schedule time for reading. I can read at the airport or anywhere, actually, even in-flight or any other transport. I “read with a pencil”, meaning I take a lot of notes, which I liketo put in OneNote, but since in most cases I don’t have power, I use the Moleskine to do that. Speaking of which, sometimes as I’m thinking I come up with new topics, ideas, blog posts, or things to teach in my classes. Once again I take out the notebook and write it down. All of these notes get a check-mark when I get back to the office and transfer the writing to OneNote. I’ve tried those “smart pens” and so on to automate this, but it just never works out. Pencil and paper are just fine. As I mentioned, sometime I just need to think. I’ll do nothing, and let my mind wander, thinking of nothing in particular, or some math problem or science question I’m interested in. My only issue with this is that I communicate tothink, and I don’t want to drive people crazy by being that guy that won’t shut up, so I think in a different way. Power, but no Internet or Phone If I have power but no Internet or phone, I focus on the laptop and the tablet as before, and I also recharge my other gadgets. Power, Internet, Phone and a Place to Work At first I thought that when I arrived at the hotel or event I could get the same amount of work done that I do at the office. Not so. There’s simply too many distractions, things you need, or other issues that allow this. Of course, Ican work on any device, read, think, write or whatever, but I am simply not as productive as I am in my home office. So I plan for about 25-50% as much work getting done in this environment as I think I could really do. I’ve done some measurements, and this holds out to be true almost every time. The key is that I re-set my expectations (and my co-worker’s expectations as well) that this is the case. I use the Out-Of-Office notices to let people know that I’m just not going to be 100% at this time – it’s hard for everyone, but it’s more honest and realistic, and I’d rather they know that – and that I realize that – than to let them think I’m totally available. Because I’m not – I’m traveling. I don’t tend to put too much detail, because after all I don’t necessarily want to let people know when I’m not home :) but I do think it’s important to let people that depend on my know that I’ll get back with them later. I hope this helps you think through your own methodology of staying productive when you travel. Or perhaps you just go offline, and don’t worry about any of this – good for you! That’s completely valid as well.   (Oh, and yes, I wrote this at 35K feet, on Alaska Airlines on a trip. :)  Practice what you preach, Buck.)

  Read the article

• Best Practices - which domain types should be used to run applications

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) One question that frequently comes up is "which types of domain should I use to run applications?" There used to be a simple answer in most cases: "only run applications in guest domains", but enhancements to T-series servers, Oracle VM Server for SPARC and the advent of SPARC SuperCluster have made this question more interesting and worth qualifying differently. This article reviews the relevant concepts and provides suggestions on where to deploy applications in a logical domains environment. Review: division of labor and types of domain Oracle VM Server for SPARC offloads many functions from the hypervisor to domains (also called virtual machines). This is a modern alternative to using a "thick" hypervisor that provides all virtualization functions, as in traditional VM designs, This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, which further improves reliability and security. In this architecture, management and I/O functionality are provided within domains. Oracle VM Server for SPARC does this by defining the following types of domain, each with their own roles: Control domain - management control point for the server, used to configure domains and manage resources. It is the first domain to boot on a power-up, is an I/O domain, and is usually a service domain as well. I/O domain - has been assigned physical I/O devices: a PCIe root complex, a PCI device, or a SR-IOV (single-root I/O Virtualization) function. It has native performance and functionality for the devices it owns, unmediated by any virtualization layer. Service domain - provides virtual network and disk devices to guest domains. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI busses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain, which is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure: guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device doesn't result in an application outage. This is also used for "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O busses, so there is more I/O capacity that can be used for applications. Increased T-series server capacity made it attractive to run more vertical applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the SPARC SuperCluster engineered system, announced a year ago at Oracle OpenWorld. In SPARC SuperCluster, I/O domains are used for high performance applications, with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is the introduction of Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. A domain with either a DIO or SR-IOV device is an I/O domain. In summary: not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O go guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm has to be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. I/O domains can be used for applications with high performance requirements. This is used to great effect in SPARC SuperCluster and in general T4 deployments. Direct I/O (DIO) and Single Root I/O Virtualization (SR-IOV) make this more attractive by giving direct I/O access to more domains. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect other domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so an interruption of service in the service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. SPARC SuperCluster use the control domain for applications, but it is an exception: it's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity T-series servers have made it more attractive to use them for applications with high resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide higher performance for critical applications.

  Read the article

• Effectiveness and Efficiency

  - by Daniel Moth

  In the professional environment, i.e. at work, I am always seeking personal growth and to be challenged. The result is that my assignments, my work list, my tasks, my goals, my commitments, my [insert whatever word resonates with you] keep growing (in scope and desired impact). Which in turn means I have to keep finding new ways to deliver more value, while not falling into the trap of working more hours. To do that I continuously evaluate both my effectiveness and my efficiency. EFFECTIVENESS The first thing I check is my effectiveness: Am I doing the right things? Am I focusing too much on unimportant things? Am I spending more time doing stuff that is important to my team/org/division/business/company, or am I spending it on stuff that is important to me and that I enjoy doing? Am I valuing activities that maybe I have outgrown and should be delegated to others who are at a stage I have surpassed (in Microsoft speak: is the work I am doing level appropriate or am I still operating at the previous level)? Notice how the answers to those questions change over time and due to certain events, so I have to remind myself to revisit them frequently. Events that force me to re-examine them are: change of role, change of team/org/etc, change of direction of team/org/etc, re-org, new hires on the team that take on some of the work I did, personal promotion, change of manager... and if none of those events has occurred since the last annual review, I ask myself those at each annual review anyway. If you think you are not being effective at work, make a list of the stuff that you do and start tracking where your time goes. In parallel, have a discussion with your manager about where they think your time should go. Ultimately your time is finite and hence it is your most precious investment, don't waste it. If your management doesn't value as highly what you spend your time on, then either convince your management, or stop spending your time on it, or find different management: Lead, Follow, or get out of the way! That's my view on effectiveness. You have to fix that before moving to being efficient, or you may end up being very efficient at stuff that nobody wants you to be doing in the first place. For example, you may be spending your time writing blog posts and becoming better and faster at it all the time. If your manager thinks that is not even part of your job description, you are wasting your time to satisfy your inner desires. Nobody can help you with your effectiveness other than your management chain and your management peers - they are the judges of it. EFFICIENCY The second thing I check is my efficiency: Am I doing things right? For me, doing things right means that I deliver the same quality of work faster [than what I used to, and than my peers, and than expected of me]. The result is that I can achieve more [than what I used to, and than my peers, and than expected of me]. Notice how the efficiency goal is a more portable one. If, by whatever criteria, you think you are the best at [insert your own skill here], this can change at two events: because you have new colleagues (who are potentially better than your older ones), and it can change with a change of manager (who has potentially higher expectations). That's about it. Once you are efficient at something, you carry that with you... All you need to really be doing here is, when taking on new kinds of work that you haven't done before, try a few approaches and devise a system so that you can become efficient at this new activity too... Just keep "collecting" stuff that you are efficient at. If you think you are not being efficient at something, break it down: What are the steps you take to complete that task? How long do you spend on each step? Talk to others about what steps they take, to see if you can optimize some steps away or trade them for better steps, or just learn how to complete a step faster. Have a system for every task you take so that you can have repeatable success. That's my view on efficiency. You have to fix it so that you can free up time to do more. When you plan a route from A to B - all else being equal - you try to get there as fast as possible so why would you not want to do that with your everyday work? For example, imagine you are inefficient at processing email: You spend more time than necessary dealing with email, and you still end up with dropped email threads and with slower response times than others. How can you improve? Talk to someone that you think is good at this, understand their system (e.g. here is my email processing system) and come up with one that works for you. Parting Thoughts Are you considered, by your colleagues and manager, an effective and efficient person at your workplace? If you are, what would you change if you were asked by your management to do the job of two people? Seriously, think about that! Your immediate reaction may be "that is not possible", but it actually is. You just have to re-assess what things that were previously important will now stop being important, by discussing them with your management and reaching agreement on relative priorities. For example, stuff that was previously on your plate may now have to be delegated or dropped. Where you thought you were efficient, maybe now you have to find an even faster path to completion, perhaps keeping in mind that Perfect is the Enemy of “Good Enough”. My personal experience (from both observing others and from my own reflection) is that when folks are struggling to keep up at work it is because of two reasons: They are investing energy in stuff that they enjoy doing which the business regards as having a lower priority than a lot of other things on their plate. They are completing tasks to a level of higher quality than what is required (due to personal pride) missing the big picture which almost always mandates completing three tasks at good enough quality than knocking only one of them out of the park while the other two come in late or not at all. There is a lot of content on the web, so I strongly encourage you to use your favorite search engine to read other views on effectiveness and efficiency (Bing, Google). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• Oracle Certification and virtualization Solutions.

  - by scoter

  As stated in official MOS ( My Oracle Support ) document 249212.1 support for Oracle products on non-Oracle VM platforms follow exactly the same stance as support for VMware and, so, the only x86 virtualization software solution certified for any Oracle product is "Oracle VM". Based on the fact that: Oracle VM is totally free ( you have the option to buy Oracle-Support ) Certified is pretty different from supported ( OracleVM is certified, others could be supported ) With Oracle VM you may not require to reproduce your issue(s) on physical server Oracle VM is the only x86 software solution that allows hard-partitioning *** *** see details to these Oracle public links: http://www.oracle.com/technetwork/server-storage/vm/ovm-hardpart-168217.pdf http://www.oracle.com/us/corporate/pricing/partitioning-070609.pdf people started asking to migrate from third party virtualization software (ex. RH KVM, VMWare) to Oracle VM. Migrating RH KVM guest to Oracle VM. OracleVM has a built-in P2V utility ( Official Documentation ) but in some cases we can't use it, due to : network inaccessibility between hypervisors ( KVM and OVM ) network slowness between hypervisors (KVM and OVM) size of the guest virtual-disks Here you'll find a step-by-step guide to "manually" migrate a guest machine from KVM to OVM. 1. Verify source guest characteristics. Using KVM web console you can verify characteristics of the guest you need to migrate, such as: CPU Cores details Defined Memory ( RAM ) Name of your guest Guest operating system Disks details ( number and size ) Network details ( number of NICs and network configuration ) 2. Export your guest in OVF / OVA format.  The export from Redhat KVM ( kernel virtual machine ) will create a structured export of your guest: [root@ovmserver1 mnt]# lltotal 12drwxrwx--- 5 36 36 4096 Oct 19 2012 b8296fca-13c4-4841-a50f-773b5139fcee b8296fca-13c4-4841-a50f-773b5139fcee is the ID of the guest exported from RH-KVM [root@ovmserver1 mnt]# cd b8296fca-13c4-4841-a50f-773b5139fcee/[root@ovmserver1 b8296fca-13c4-4841-a50f-773b5139fcee]# ls -ltrtotal 12drwxr-x--- 4 36 36 4096 Oct 19  2012 masterdrwxrwx--- 2 36 36 4096 Oct 29  2012 dom_mddrwxrwx--- 4 36 36 4096 Oct 31  2012 images images contains your virtual-disks exported [root@ovmserver1 b8296fca-13c4-4841-a50f-773b5139fcee]# cd images/[root@ovmserver1 images]# ls -ltratotal 16drwxrwx--- 5 36 36 4096 Oct 19  2012 ..drwxrwx--- 2 36 36 4096 Oct 31  2012 d4ef928d-6dc6-4743-b20d-568b424728a5drwxrwx--- 2 36 36 4096 Oct 31  2012 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1drwxrwx--- 4 36 36 4096 Oct 31  2012 .[root@ovmserver1 images]# cd d4ef928d-6dc6-4743-b20d-568b424728a5/[root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# ls -ltotal 5169092-rwxr----- 1 36 36 187904819200 Oct 31  2012 4c03b1cf-67cc-4af0-ad1e-529fd665dac1-rw-rw---- 1 36 36          341 Oct 31  2012 4c03b1cf-67cc-4af0-ad1e-529fd665dac1.meta[root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# file 4c03b1cf-67cc-4af0-ad1e-529fd665dac14c03b1cf-67cc-4af0-ad1e-529fd665dac1: LVM2 (Linux Logical Volume Manager) , UUID: sZL1Ttpy0vNqykaPahEo3hK3lGhwspv 4c03b1cf-67cc-4af0-ad1e-529fd665dac1 is the first exported disk ( physical volume ) [root@ovmserver1 d4ef928d-6dc6-4743-b20d-568b424728a5]# cd ../4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/[root@ovmserver1 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1]# ls -ltotal 5568076-rwxr----- 1 36 36 107374182400 Oct 31  2012 9020f2e1-7b8a-4641-8f80-749768cc237a-rw-rw---- 1 36 36          341 Oct 31  2012 9020f2e1-7b8a-4641-8f80-749768cc237a.meta[root@ovmserver1 4b241ea0-43aa-4f3b-ab7d-2fc633b491a1]# file 9020f2e1-7b8a-4641-8f80-749768cc237a9020f2e1-7b8a-4641-8f80-749768cc237a: x86 boot sector; partition 1: ID=0x83, active, starthead 1, startsector 63, 401562 sectors; partition 2: ID=0x82, starthead 0, startsector 401625, 65529135 sectors; startsector 63, 401562 sectors; partition 2: ID=0x82, starthead 0, startsector 401625, 65529135 sectors; partition 3: ID=0x83, starthead 254, startsector 65930760, 8385930 sectors; partition 4: ID=0x5, starthead 254, startsector 74316690, 135395820 sectors, code offset 0x48 9020f2e1-7b8a-4641-8f80-749768cc237a is the second exported disk, with partition 1 bootable 3. Prepare the new guest on Oracle VM. By Ovm-Manager we can prepare the guest where we will move the exported virtual-disks; under the Tab "Servers and VMs": click on  and create your guest with parameters collected before (point 1): - add NICs on different networks: - add virtual-disks; in this case we add two disks of 1.0 GB each one; we will extend the virtual disk copying the source KVM virtual-disk ( see next steps ) - verify virtual-disks created ( under Repositories tab ) 4. Verify OVM virtual-disks names. [root@ovmserver1 VirtualMachines]# grep -r hyptest_rdbms * 0004fb0000060000a906b423f44da98e/vm.cfg:OVM_simple_name = 'hyptest_rdbms' [root@ovmserver1 VirtualMachines]# cd 0004fb0000060000a906b423f44da98e [root@ovmserver1 0004fb0000060000a906b423f44da98e]# more vm.cfgvif = ['mac=00:21:f6:0f:3f:85,bridge=0004fb001089128', 'mac=00:21:f6:0f:3f:8e,bridge=0004fb00101971d'] OVM_simple_name = 'hyptest_rdbms' vnclisten = '127.0.0.1' disk = ['file:/OVS/Repositories/0004fb00000300004f17b7368139eb41/ VirtualDisks/0004fb000012000097c1bfea9834b17d.img,xvda,w', 'file:/OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img,xvdb,w'] vncunused = '1' uuid = '0004fb00-0006-0000-a906-b423f44da98e' on_reboot = 'restart' cpu_weight = 27500 memory = 32768 cpu_cap = 0 maxvcpus = 8 OVM_high_availability = True maxmem = 32768 vnc = '1' OVM_description = '' on_poweroff = 'destroy' on_crash = 'restart' name = '0004fb0000060000a906b423f44da98e' guest_os_type = 'linux' builder = 'hvm' vcpus = 8 keymap = 'en-us' OVM_os_type = 'Oracle Linux 5' OVM_cpu_compat_group = '' OVM_domain_type = 'xen_hvm' disk2 ovm ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img disk1 ovm ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb000012000097c1bfea9834b17d.img Summarizing disk1 --source ==> /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/9020f2e1-7b8a-4641-8f80-749768cc237a disk1 --dest ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb000012000097c1bfea9834b17d.img disk2 --source ==> /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/d4ef928d-6dc6-4743-b20d-568b424728a5/4c03b1cf-67cc-4af0-ad1e-529fd665dac1 disk2 --dest ==> /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/ 0004fb0000120000cde6a11c3cb1d0be.img 5. Copy KVM exported virtual-disks to OVM virtual-disks. Keeping your Oracle VM guest stopped you can copy KVM exported virtual-disks to OVM virtual-disks; what I did is only to locally mount the filesystem containing the exported virtual-disk ( by an usb device ) on my OVS; the copy automatically resize OVM virtual-disks ( previously created with a size of 1GB ) . nohup cp /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/4b241ea0-43aa-4f3b-ab7d-2fc633b491a1/9020f2e1-7b8a-4641-8f80-749768cc237a /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/0004fb000012000097c1bfea9834b17d.img & nohup cp /mnt/b8296fca-13c4-4841-a50f-773b5139fcee/images/d4ef928d-6dc6-4743-b20d-568b424728a5/4c03b1cf-67cc-4af0-ad1e-529fd665dac1 /OVS/Repositories/0004fb00000300004f17b7368139eb41/VirtualDisks/0004fb0000120000cde6a11c3cb1d0be.img & 7. When copy completed refresh repository to aknowledge the new-disks size. 7. After "refresh repository" is completed, start guest machine by Oracle VM manager. After the first start of your guest: - verify that you can see all disks and partitions - verify that your guest is network reachable ( MAC Address of your NICs changed ) Eventually you can also evaluate to convert your guest to PVM ( Paravirtualized virtual Machine ) following official Oracle documentation. Ciao Simon COTER ps: next-time I'd like to post an article reporting how to manually migrate Virtual-Iron guests to OracleVM.  Comments and corrections are welcome. 

  Read the article

• Delight and Excite

  - by Applications User Experience

  Mick McGee, CEO & President, EchoUser Editor’s Note: EchoUser is a User Experience design firm in San Francisco and a member of the Oracle Usability Advisory Board. Mick and his staff regularly consult on Oracle Applications UX projects. Being part of a user experience design firm, we have the luxury of working with a lot of great people across many great companies. We get to help people solve their problems.  At least we used to. The basic design challenge is still the same; however, the goal is not necessarily to solve “problems” anymore; it is, “I want our products to delight and excite!” The question for us as UX professionals is how to design to those goals, and then how to assess them from a usability perspective. I’m not sure where I first heard “delight and excite” (A book? blog post? Facebook  status? Steve Jobs quote?), but now I hear these listed as user experience goals all the time. In particular, somewhat paradoxically, I routinely hear them in enterprise software conversations. And when asking these same enterprise companies what will make the project successful, we very often hear, “Make it like Apple.” In past days, it was “make it like Yahoo (or Amazon or Google“) but now Apple is the common benchmark. Steve Jobs and Apple were not secrets, but with Jobs’ passing and Apple becoming the world’s most valuable company in the last year, the impact of great design and experience is suddenly very widespread. In particular, users’ expectations have gone way up. Being an enterprise company is no shield to the general expectations that users now have, for all products. Designing a “Minimum Viable Product” The user experience challenge has historically been, to echo the words of Eric Ries (author of Lean Startup) , to create a “minimum viable product”: the proverbial, “make it good enough”. But, in our profession, the “minimum viable” part of that phrase has oftentimes, unfortunately, referred to the design and user experience. Technology typically dominated the focus of the biggest, most successful companies. Few have had the laser focus of Apple to also create and sell design and user experience alongside great technology. But now that Apple is the most valuable company in the world, copying their success is a common undertaking. Great design is now a premium offering that everyone wants, from the one-person startup to the largest companies, consumer and enterprise. This emerging business paradigm will have significant impact across the user experience design process and profession. One area that particularly interests me is, how are we going to evaluate these new emerging “delight and excite” experiences, which are further customized to each particular domain? How to Measure “Delight and Excite” Traditional usability measures of task completion rate, assists, time, and errors are still extremely useful in many situations; however, they are too blunt to offer much insight into emerging experiences “Satisfaction” is usually assessed in user testing, in roughly equivalent importance to the above objective metrics. Various surveys and scales have provided ways to measure satisfying UX, with whatever questions they include. However, to meet the demands of new business goals and keep users at the center of design and development processes, we have to explore new methods to better capture custom-experience goals and emotion-driven user responses. We have had success assessing custom experiences, including “delight and excite”, by employing a variety of user testing methods that tend to combine formative and summative techniques (formative being focused more on identifying usability issues and ways to improve design, and summative focused more on metrics). Our most successful tool has been one we’ve been using for a long time, Magnitude Estimation Technique (MET). But it’s not necessarily about MET as a measure, rather how it is created. Caption: For one client, EchoUser did two rounds of testing.  Each test was a mix of performing representative tasks and gathering qualitative impressions. Each user participated in an in-person moderated 1-on-1 session for 1 hour, using a testing set-up where they held the phone. The primary goal was to identify usability issues and recommend design improvements. MET is based on a definition of the desired experience, which users will then use to rate items of interest (usually tasks in a usability test). In other words, a custom experience definition needs to be created. This can then be used to measure satisfaction in accomplishing tasks; “delight and excite”; or anything else from strategic goals, user demands, or elsewhere. For reference, our standard MET definition in usability testing is: “User experience is your perception of how easy to use, well designed and productive an interface is to complete tasks.” Articulating the User Experience We’ve helped construct experience definitions for several clients to better match their business goals. One example is a modification of the above that was needed for a company that makes medical-related products: “User experience is your perception of how easy to use, well-designed, productive and safe an interface is for conducting tasks. ‘Safe’ is how free an environment (including devices, software, facilities, people, etc.) is from danger, risk, and injury.” Another example is from a company that is pushing hard to incorporate “delight” into their enterprise business line: “User experience is your perception of a product’s ease of use and learning, satisfaction and delight in design, and ability to accomplish objectives.” I find the last one particularly compelling in that there is little that identifies the experience as being for a highly technical enterprise application. That definition could easily be applied to any number of consumer products. We have gone further than the above, including “sexy” and “cool” where decision-makers insisted they were part of the desired experience. We also applied it to completely different experiences where the “interface” was, for example, riding public transit, the “tasks” were train rides, and we followed the participants through the train-riding journey and rated various aspects accordingly: “A good public transportation experience is a cost-effective way of reliably, conveniently, and safely getting me to my intended destination on time.” To construct these definitions, we’ve employed both bottom-up and top-down approaches, depending on circumstances. For bottom-up, user inputs help dictate the terms that best fit the desired experience (usually by way of cluster and factor analysis). Top-down depends on strategic, visionary goals expressed by upper management that we then attempt to integrate into product development (e.g., “delight and excite”). We like a combination of both approaches to push the innovation envelope, but still be mindful of current user concerns. Hopefully the idea of crafting your own custom experience, and a way to measure it, can provide you with some ideas how you can adapt your user experience needs to whatever company you are in. Whether product-development or service-oriented, nearly every company is ultimately providing a user experience. The Bottom Line Creating great experiences may have been popularized by Steve Jobs and Apple, but I’ll be honest, it’s a good feeling to be moving from “good enough” to “delight and excite,” despite the challenge that entails. In fact, it’s because of that challenge that we will expand what we do as UX professionals to help deliver and assess those experiences. I’m excited to see how we, Oracle, and the rest of the industry will live up to that challenge.

  Read the article

• Clouds Everywhere But not a Drop of Rain – Part 3

  - by sxkumar

  I was sharing with you how a broad-based transformation such as cloud will increase agility and efficiency of an organization if process re-engineering is part of the plan.  I have also stressed on the key enterprise requirements such as “broad and deep solutions, “running your mission critical applications” and “automated and integrated set of capabilities”. Let me walk you through some key cloud attributes such as “elasticity” and “self-service” and what they mean for an enterprise class cloud. I will also talk about how we at Oracle have taken a very enterprise centric view to developing cloud solutions and how our products have been specifically engineered to address enterprise cloud needs. Cloud Elasticity and Enterprise Applications Requirements Easy and quick scalability for a short-period of time is the signature of cloud based solutions. It is this elasticity that allows you to dynamically redistribute your resources according to business priorities, helps increase your overall resource utilization, and reduces operational costs by allowing you to get the most out of your existing investment. Most public clouds are offering a instant provisioning mechanism of compute power (CPU, RAM, Disk), customer pay for the instance-hours(and bandwidth) they use, adding computing resources at peak times and removing them when they are no longer needed. This type of “just-in-time” serving of compute resources is well known for mid-tiers “state less” servers such as web application servers and web servers that just need another machine to start and run on it but what does it really mean for an enterprise application and its underlying data? Most enterprise applications are not as quite as “state less” and justifiably so. As such, how do you take advantage of cloud elasticity and make it relevant for your enterprise apps? This is where Cloud meets Grid Computing. At Oracle, we have invested enormous amount of time, energy and resources in creating enterprise grid solutions. All our technology products offer built-in elasticity via clustering and dynamic scaling. With products like Real Application Clusters (RAC), Automatic Storage Management, WebLogic Clustering, and Coherence In-Memory Grid, we allow all your enterprise applications to benefit from Cloud elasticity –both vertically and horizontally - without requiring any application changes. A number of technology vendors take a rather simplistic route of starting up additional or removing unneeded VM as the "Cloud Scale-Out" solution. While this may work for stateless mid-tier servers where load balancers can handle the addition and remove of instances transparently but following a similar approach for the database tier - often called as "database sharding" - requires significant application modification and typically does not work with off the shelf packaged applications. Technologies like Oracle Database Real Application Clusters, Automatic Storage Management, etc. on the other hand bring the benefits of incremental scalability and on-demand elasticity to ANY application by providing a simplified abstraction layers where the application does not need deal with data spread over multiple database instances. Rather they just talk to a single database and the database software takes care of aggregating resources across multiple hardware components. It is the technologies like these that truly make a cloud solution relevant for enterprises.  For customers who are looking for a next generation hardware consolidation platform, our engineered systems (e.g. Exadata, Exalogic) not only provide incredible amount of performance and capacity, they also reduce the data center complexity and simplify operations. Assemble, Deploy and Manage Enterprise Applications for Cloud Products like Oracle Virtual assembly builder (OVAB) resolve the complex problem of bringing the cloud speed to complex multi-tier applications. With assemblies, you can not only provision all components of a multi-tier application and wire them together by push of a button, other aspects of application lifecycle, such as real-time application testing, scale-up/scale-down, performance and availability monitoring, etc., are also automated using Oracle Enterprise Manager.  An essential criteria for an enterprise cloud to succeed is the ability to ensure business service levels especially when business users have either full visibility on the usage cost with a “show back” or a “charge back”. With Oracle Enterprise Manager 12c, we have created the most comprehensive cloud management solution in the industry that is capable of managing business service levels “applications-to-disk” in a enterprise private cloud – all from a single console. It is the only cloud management platform in the industry that allows you to deliver infrastructure, platform and application cloud services out of the box. Moreover, it offers integrated and complete lifecycle management of the cloud - including planning and set up, service delivery, operations management, metering and chargeback, etc .  Sounds unbelievable? Well, just watch this space for more details on how Oracle Enterprise Manager 12c is the nerve center of Oracle Cloud! Our cloud solution portfolio is also the broadest and most deep in the industry  - covering public, private, hybrid, Infrastructure, platform and applications clouds. It is no coincidence therefore that the Oracle Cloud today offers the most comprehensive set of public cloud services in the industry.  And to a large part, this has been made possible thanks to our years on investment in creating cloud enabling technologies.  Summary  But the intent of this blog post isn't to dwell on how great our solutions are (these are just some examples to illustrate how we at Oracle have approached this problem space). Rather it is to help you ask the right questions before you embark on your cloud journey.  So to summarize, here are the key takeaways.       It is critical that you are clear on why you are building the cloud. Successful organizations keep business benefits as the first and foremost cloud objective. On the other hand, those who approach this purely as a technology project are more likely to fail. Think about where you want to be in 3-5 years before you get started. Your long terms objectives should determine what your first step ought to be. As obvious as it may seem, more people than not make the first move without knowing where they are headed.  Don’t make the mistake of equating cloud to virtualization and Infrastructure-as-a-Service (IaaS). Spinning a VM on-demand will give some short term relief to your IT staff but is unlikely to solve your larger business problems. As such, even if IaaS is your first step towards a more comprehensive cloud, plan the roadmap around those higher level services before you begin. And ask your vendors on how they are going to be your partners in this journey. Capabilities like self-service access and chargeback/showback are absolutely critical if you really expect your cloud to be transformational. Your business won't see the full benefits of the cloud until it empowers them with same kind of control and transparency that they are used to while using a public cloud service.  Evaluate the benefits of integration, as opposed to blindly following the best-of-breed strategy. Integration is a huge challenge and more so in a cloud environment. There are enormous costs associated with stitching a solution out of disparate components and even more in maintaining it. Hope you found these ideas helpful. Looking forward to hearing your thoughts and experiences.

  Read the article

• SOA Implementation Challenges

  Why do companies think that if they put up a web service that they are doing Service-Oriented Architecture (SOA)? Unfortunately, the IT and business world love to run on the latest hype or buzz words of which very few even understand the meaning. One of the largest issues companies have today as they consider going down the path of SOA, is the lack of knowledge regarding the architectural style and the over usage of the term SOA. So how do we solve this issue?I am sure most of you are thinking by now that you know what SOA is because you developed a few web services.  Isn’t that SOA, right? No, that is not SOA, but instead Just Another Web Service (JAWS). For us to better understand what SOA is let’s look at a few definitions.Douglas K. Bary defines service-oriented architecture as a collection of services. These services are enabled to communicate with each other in order to pass data or coordinating some activity with other services.If you look at this definition closely you will notice that Bary states that services communicate with each other. Let us compare this statement with my first statement regarding companies that claim to be doing SOA when they have just a collection of web services. In order for these web services to for an SOA application they need to be interdependent on one another forming some sort of architectural hierarchy. Just because a company has a few web services does not mean that they are all interconnected.SearchSOA from TechTarget.com states that SOA defines how two computing entities work collectively to enable one entity to perform a unit of work on behalf of another. Once again, just because a company has a few web services does not guarantee that they are even working together let alone if they are performing work for each other.SearchSOA also points out service interactions should be self-contained and loosely-coupled so that all interactions operate independent of each other.Of all the definitions regarding SOA Thomas Erl’s seems to shed the most light on this concept. He states that “SOA establishes an architectural model that aims to enhance the efficiency, agility, and productivity of an enterprise by positioning services as the primary means through which solution logic is represented in support of the realization of the strategic goals associated with service-oriented computing.” (Erl, 2011) Once again this definition proves that a collection of web services does not mean that a company is doing SOA. However, it does mean that a company has a collection of web services, and that is it.In order for a company to start to go down the path of SOA, they must take  a hard look at their existing business process while abstracting away any technology so that they can define what is they really want to accomplish. Once a company has done this, they can begin to factor out common sub business process like credit card process, user authentication or system notifications in to small components that can be built independent of each other and then reassembled to form new and dynamic services that are loosely coupled and agile in that they can change as a business grows.Another key pitfall of companies doing SOA is the fact that they let vendors drive their architecture. Why do companies do this? Vendors’ do not hold your company’s success as their top priority; in fact they hold their own success as their top priority by selling you as much stuff as you are willing to buy. In my experience companies tend to strive for the maximum amount of benefits with a minimal amount of cost. Does anyone else see any conflicts between this and the driving force behind vendors.Mike Kavis recommends in an article written in CIO.com that companies need to figure out what they need before they talk to a vendor or at least have some idea of what they need. It is important to thoroughly evaluate each vendor and watch them perform a live demo of their system so that you as the company fully understand what kind of product or service the vendor is actually offering. In addition, do research on each vendor that you are considering, check out blog posts, online reviews, and any information you can find on the vendor through various search engines.Finally he recommends companies to verify any recommendations supplied by a vendor. From personal experience this is very important. I can remember when the company I worked for purchased a $200,000 add-on to their phone system that never actually worked as it was intended. In fact, just after my departure from the company started the process of attempting to get their money back from the vendor. This potentially could have been avoided if the company had done the research before selecting this vendor to ensure that their product and vendor would live up to their claims. I know that some SOA vendor offer free training regarding SOA because they know that there are a lot of misconceptions about the topic. Superficially this is a great thing for companies to take part in especially if the company is starting to implement SOA architecture and are still unsure about some topics or are looking for some guidance regarding the topic. However beware that some companies will focus on their product line only regarding the training. As an example, InfoWorld.com claims that companies providing deep seminars disguised as training, focusing more about ESBs and SOA governance technology, and less on how to approach and solve the architectural issues of the attendees.In short, it is important to remember that we as software professionals are responsible for guiding a business’s technology sections should be well informed and fully understand any new concepts that may be considered for implementation. As I have demonstrated already a company that has a few web services does not mean that they are doing SOA.  Additionally, we must not let the new buzz word of the day drive our technology, but instead our technology decisions should be driven from research and proven experience. Finally, it is important to rely on vendors when necessary, however, always take what they say with a grain of salt while cross checking any claims that they may make because we have to live with the aftermath of a system after the vendors are gone.   References: Barry, D. K. (2011). Service-oriented architecture (SOA) definition. Retrieved 12 12, 2011, from Service-Architecture.com: http://www.service-architecture.com/web-services/articles/service-oriented_architecture_soa_definition.html Connell, B. (2003, 9). service-oriented architecture (SOA). Retrieved 12 12, 2011, from SearchSOA: http://searchsoa.techtarget.com/definition/service-oriented-architecture Erl, T. (2011, 12 12). Service-Oriented Architecture. Retrieved 12 12, 2011, from WhatIsSOA: http://www.whatissoa.com/p10.php InfoWorld. (2008, 6 1). Should you get your SOA knowledge from SOA vendors? . Retrieved 12 12, 2011, from InfoWorld.com: http://www.infoworld.com/d/architecture/should-you-get-your-soa-knowledge-soa-vendors-453 Kavis, M. (2008, 6 18). Top 10 Reasons Why People are Making SOA Fail. Retrieved 12 13, 2011, from CIO.com: http://www.cio.com/article/438413/Top_10_Reasons_Why_People_are_Making_SOA_Fail?page=5&taxonomyId=3016  

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

• Windows 8, NVIDIA graphics recognition fails

  - by Roy Grubb

  I just installed Windows 8 Pro OEM 64-bit (clean install) and it won't properly recognize my graphics adapter. When I installed Win8, it automatically installed the BasicDisplay.sys driver dated 6/21/2006. 6.2.9200.16384 (win8_rtm.120725-1247). Hardware - Mobo:MSi G41M-P33 Combo CPU:Intel CoreDuo 6600 Graphics:NVIDIA GeForce 9400GT *OS* - Windows 8 Pro 64-bit OEM The graphics adapter worked fine in Windows XP. The PC is a generic box, bought locally and its mobo failed recently, so I replaced it with the G41M. Microsoft wouldn't let me re-activate Windows XP with a different mobo, so I installed Win8, which appears to work except as described next. Win8 only partially recognizes the graphics adapter and won't allow NVIDIA latest driver installer to see that it's an NVIDIA card. As a result, OpenGL doesn't work, and this is needed by the software I most use. Other than that the graphics look OK. When I say 'partially recognizes', I mean that via the Control Panel, I can see that the adapter is described as NVIDIA, but the driver remains stuck at Microsoft Basic Display Adapter no matter what I try, including "Update driver..." in adapter properties. Display Screen Resolution Advanced Settings Adapter shows: Adapter Type: Microsoft Basic Display Adapter Chip Type: NVIDIA DAC Type: NVIDIA Corporation Bios Information: G27 Board - p381n17 Don't know what this means ... no mention of 9400GT Total Available Graphics Memory: 256 MB Dedicated Video Memory: 0 MB In fact the adapter has 512MB on-board video memory. System Video Memory: 0 MB Shared System Memory: 256 MB And Control Panel Device Manager Display adapters just shows Microsoft Basic Display Adapter. No other graphics adapter, and no unknown device or yellow question mark. What I have tried so far: 1. Cleared CMOS and reset. Updated BIOS and all mobo drivers as follows: 1st I used Driver Reviver to see if any driver updates were required. It found some but I didn't use that to get the drivers. Then I switched to MSi's own mobo driver utility Live Update 5. This also showed the board needed to update several so I used it to fetch the new drivers. After that it showed that everything was up to date and I checked with Driver Reviver again, which also reported no drivers now needed updating. Rebooted. Went to the NVIDIA site to get the latest graphics adapter driver. Their auto-detect "Option 2: Automatically find drivers for my NVIDIA products" said "The NVIDIA Smart Scan was unable to evaluate your system hardware. Please use Option 1 to manually find drivers for your NVIDIA products." So I downloaded 310.70-desktop-win8-win7-winvista-64bit-international-whql.exe, which lists 9400 GT under supported products, but when I run it, it says: "NVIDIA Installer cannot continue This graphics driver could not find compatible graphics hardware." Connected the display to the on-board Intel graphics (G41 Intel Express), removed the NVIDIA card and rebooted, changed to internal graphics in CMOS. Again it installs the MS Basic Display Adapter, and can't properly run my s/w that needs OpenGL. It runs on other machines with Intel Express graphics (WinXP and 7) Shut down and pulled out the power cord. Held start button to discharge all capacitors. Removed and re-inserted NVIDIA adapter in PCI-E slot and made sure properly seated. Connected the monitor to the card, screwed plug to socket. Reconnected power cord. Started and checked in BIOS that Primary Graphics Adapter was set to PCI-E. Started Windows. Uninstalled MS Basic Display Adapter in Device Manager. Screen blanks briefly, reappears. No Graphics adapter entry was then visible in Device Manager. Restarted PC. MS Basic Display Adapter Visible again in Device Manager. Clicked in Device Manager View Show hidden devices. No other graphics adapter appears, no unknown devices. Rebooted. Tried Scan for Hardware changes. None detected. Tried right-click on MS Basic Display Adapter Properties Driver Update Driver... Search automatically. It replied that it had determined driver was up to date. I checked that there were no graphic driver-related entries in Programs and Features that I could delete (none). Searched for any other drivers with nvidia in their name and deleted them, just keeping the 306.97 installer exe file. Did a Windows Update. Ran GPU-Z which shows (main items): Microsoft Basic Display Adapter GPU G72 BIOS 5.72.22.76.88 Device ID 10DE - 01D5 DDR2 Bus Width 32 Bit Memory size 64MB Driver Version nvlddmkm 6.2.9200.16384 (ForceWare 0.00) / Win8 64 NVIDIA SLI Unknown in the drop-down at the foot, "Microsoft Basic Display Adapter" is the only option If I swap hard disks in that machine to one with a Ubuntu 10.4 installation (originally installed on the same PC), lspci shows "VGA compatible controller as NVIDIA Corporation Device 01d5 (rev a1) (prog-if 00 [VGA controller])" and "kernel driver in use: nvidia" I'm out of ideas for new things to try and would be really grateful of suggestions. Thanks!

  Read the article

• Integrating WIF with WCF Data Services

  - by cibrax

  A time ago I discussed how a custom REST Starter kit interceptor could be used to parse a SAML token in the Http Authorization header and wrap that into a ClaimsPrincipal that the WCF services could use. The thing is that code was initially created for Geneva framework, so it got deprecated quickly. I recently needed that piece of code for one of projects where I am currently working on so I decided to update it for WIF. As this interceptor can be injected in any host for WCF REST services, also represents an excellent solution for integrating claim-based security into WCF Data Services (previously known as ADO.NET Data Services). The interceptor basically expects a SAML token in the Authorization header. If a token is found, it is parsed and a new ClaimsPrincipal is initialized and injected in the WCF authorization context. public class SamlAuthenticationInterceptor : RequestInterceptor {   SecurityTokenHandlerCollection handlers;   public SamlAuthenticationInterceptor()     : base(false)   {     this.handlers = FederatedAuthentication.ServiceConfiguration.SecurityTokenHandlers;   }   public override void ProcessRequest(ref RequestContext requestContext)   {     SecurityToken token = ExtractCredentials(requestContext.RequestMessage);     if (token != null)     {       ClaimsIdentityCollection claims = handlers.ValidateToken(token);       var principal = new ClaimsPrincipal(claims);       InitializeSecurityContext(requestContext.RequestMessage, principal);     }     else     {       DenyAccess(ref requestContext);     }   }   private void DenyAccess(ref RequestContext requestContext)   {     Message reply = Message.CreateMessage(MessageVersion.None, null);     HttpResponseMessageProperty responseProperty = new HttpResponseMessageProperty() { StatusCode = HttpStatusCode.Unauthorized };     responseProperty.Headers.Add("WWW-Authenticate",           String.Format("Basic realm=\"{0}\"", ""));     reply.Properties[HttpResponseMessageProperty.Name] = responseProperty;     requestContext.Reply(reply);     requestContext = null;   }   private SecurityToken ExtractCredentials(Message requestMessage)   {     HttpRequestMessageProperty request = (HttpRequestMessageProperty)  requestMessage.Properties[HttpRequestMessageProperty.Name];     string authHeader = request.Headers["Authorization"];     if (authHeader != null && authHeader.Contains("<saml"))     {       XmlTextReader xmlReader = new XmlTextReader(new StringReader(authHeader));       var col = SecurityTokenHandlerCollection.CreateDefaultSecurityTokenHandlerCollection();       SecurityToken token = col.ReadToken(xmlReader);                                        return token;     }     return null;   }   private void InitializeSecurityContext(Message request, IPrincipal principal)   {     List<IAuthorizationPolicy> policies = new List<IAuthorizationPolicy>();     policies.Add(new PrincipalAuthorizationPolicy(principal));     ServiceSecurityContext securityContext = new ServiceSecurityContext(policies.AsReadOnly());     if (request.Properties.Security != null)     {       request.Properties.Security.ServiceSecurityContext = securityContext;     }     else     {       request.Properties.Security = new SecurityMessageProperty() { ServiceSecurityContext = securityContext };      }    }    class PrincipalAuthorizationPolicy : IAuthorizationPolicy    {      string id = Guid.NewGuid().ToString();      IPrincipal user;      public PrincipalAuthorizationPolicy(IPrincipal user)      {        this.user = user;      }      public ClaimSet Issuer      {        get { return ClaimSet.System; }      }      public string Id      {        get { return this.id; }      }      public bool Evaluate(EvaluationContext evaluationContext, ref object state)      {        evaluationContext.AddClaimSet(this, new DefaultClaimSet(System.IdentityModel.Claims.Claim.CreateNameClaim(user.Identity.Name)));        evaluationContext.Properties["Identities"] = new List<IIdentity>(new IIdentity[] { user.Identity });        evaluationContext.Properties["Principal"] = user;        return true;      }    } A WCF Data Service, as any other WCF Service, contains a service host where this interceptor can be injected. The following code illustrates how that can be done in the “svc” file. <%@ ServiceHost Language="C#" Debug="true" Service="ContactsDataService"                 Factory="AppServiceHostFactory" %> using System; using System.ServiceModel; using System.ServiceModel.Activation; using Microsoft.ServiceModel.Web; class AppServiceHostFactory : ServiceHostFactory {    protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses)   {     WebServiceHost2 result = new WebServiceHost2(serviceType, true, baseAddresses);     result.Interceptors.Add(new SamlAuthenticationInterceptor());                 return result;   } } WCF Data Services includes an specific WCF host of out the box (DataServiceHost). However, the service is not affected at all if you replace it with a custom one as I am doing in the code above (WebServiceHost2 is part of the REST Starter kit). Finally, the client application needs to pass the SAML token somehow to the data service. In case you are using any Http client library for consuming the data service, that’s easy to do, you only need to include the SAML token as part of the “Authorization” header. If you are using the auto-generated data service proxy, a little piece of code is needed to inject a SAML token into the DataServiceContext instance. That class provides an event “SendingRequest” that any client application can leverage to include custom code that modified the Http request before it is sent to the service. So, you can easily create an extension method for the DataServiceContext that negotiates the SAML token with an existing STS, and adds that token as part of the “Authorization” header. public static class DataServiceContextExtensions {        public static void ConfigureFederatedCredentials(this DataServiceContext context, string baseStsAddress, string realm)   {     string address = string.Format(STSAddressFormat, baseStsAddress, realm);                  string token = NegotiateSecurityToken(address);     context.SendingRequest += (source, args) =>     {       args.RequestHeaders.Add("Authorization", token);     };   } private string NegotiateSecurityToken(string address) { } } I left the NegociateSecurityToken method empty for this extension as it depends pretty much on how you are negotiating tokens from an existing STS. In case you want to end-to-end REST solution that involves an Http endpoint for the STS, you should definitely take a look at the Thinktecture starter STS project in codeplex.

  Read the article

• Apache DS fails to list users

  - by CuriousMind

  Apache ds fails to list the users INFO | jvm 1 | 2012/03/28 15:54:04 | java.lang.Error: ERR_546 CRITICAL: page header magic for block 59 not OK 0 INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageHeader.(PageHeader.java:95) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageHeader.getView(PageHeader.java:124) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageManager.getNext(PageManager.java:234) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PageCursor.next(PageCursor.java:104) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.PhysicalRowIdManager.fetch(PhysicalRowIdManager.java:158) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.BaseRecordManager.fetch(BaseRecordManager.java:324) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.recman.CacheRecordManager.fetch(CacheRecordManager.java:262) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.loadBPage(BPage.java:899) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.childBPage(BPage.java:890) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.find(BPage.java:284) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BPage.find(BPage.java:285) INFO | jvm 1 | 2012/03/28 15:54:04 | at jdbm.btree.BTree.find(BTree.java:408) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmTable.get(JdbmTable.java:395) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmMasterTable.get(JdbmMasterTable.java:155) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmStore.lookup(JdbmStore.java:1332) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.jdbm.JdbmStore.lookup(JdbmStore.java:70) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.EqualityEvaluator.evaluate(EqualityEvaluator.java:126) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.AndCursor.matches(AndCursor.java:234) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.AndCursor.next(AndCursor.java:143) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.xdbm.search.impl.AndCursor.next(AndCursor.java:139) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.partition.impl.btree.ServerEntryCursorAdaptor.next(ServerEntryCursorAdaptor.java:178) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.core.filtering.BaseEntryFilteringCursor.next(BaseEntryFilteringCursor.java:499) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.readResults(SearchHandler.java:314) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.doSimpleSearch(SearchHandler.java:749) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.handleIgnoringReferrals(SearchHandler.java:978) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.SearchHandler.handleIgnoringReferrals(SearchHandler.java:78) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.ReferralAwareRequestHandler.handle(ReferralAwareRequestHandler.java:83) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.ReferralAwareRequestHandler.handle(ReferralAwareRequestHandler.java:57) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.LdapRequestHandler.handleMessage(LdapRequestHandler.java:208) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.handlers.LdapRequestHandler.handleMessage(LdapRequestHandler.java:58) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.handler.demux.DemuxingIoHandler.messageReceived(DemuxingIoHandler.java:232) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.directory.server.ldap.LdapProtocolHandler.messageReceived(LdapProtocolHandler.java:193) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain$TailFilter.messageReceived(DefaultIoFilterChain.java:713) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain.callNextMessageReceived(DefaultIoFilterChain.java:434) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain.access$1200(DefaultIoFilterChain.java:46) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.DefaultIoFilterChain$EntryImpl$1.messageReceived(DefaultIoFilterChain.java:793) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.filterchain.IoFilterEvent.fire(IoFilterEvent.java:71) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.core.session.IoEvent.run(IoEvent.java:63) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.filter.executor.UnorderedThreadPoolExecutor$Worker.runTask(UnorderedThreadPoolExecutor.java:480) INFO | jvm 1 | 2012/03/28 15:54:04 | at org.apache.mina.filter.executor.UnorderedThreadPoolExecutor$Worker.run(UnorderedThreadPoolExecutor.java:434) INFO | jvm 1 | 2012/03/28 15:54:04 | at java.lang.Thread.run(Thread.java:619) INFO | jvm 1 | 2012/03/28 15:54:04 | [15:54:04] WARN [org.apache.directory.server.ldap.LdapProtocolHandler] - Null LdapSession given to cleanUpSession. INFO | jvm 1 | 2012/03/28 15:55:20 | [15:55:20] WARN [org.apache.directory.server.ldap.LdapProtocolHandler] - Unexpected exception forcing session to close: sending disconnect notice to client.

  Read the article

• SQL SERVER – Guest Posts – Feodor Georgiev – The Context of Our Database Environment – Going Beyond the Internal SQL Server Waits – Wait Type – Day 21 of 28

  - by pinaldave

  This guest post is submitted by Feodor. Feodor Georgiev is a SQL Server database specialist with extensive experience of thinking both within and outside the box. He has wide experience of different systems and solutions in the fields of architecture, scalability, performance, etc. Feodor has experience with SQL Server 2000 and later versions, and is certified in SQL Server 2008. In this article Feodor explains the server-client-server process, and concentrated on the mutual waits between client and SQL Server. This is essential in grasping the concept of waits in a ‘global’ application plan. Recently I was asked to write a blog post about the wait statistics in SQL Server and since I had been thinking about writing it for quite some time now, here it is. It is a wide-spread idea that the wait statistics in SQL Server will tell you everything about your performance. Well, almost. Or should I say – barely. The reason for this is that SQL Server is always a part of a bigger system – there are always other players in the game: whether it is a client application, web service, any other kind of data import/export process and so on. In short, the SQL Server surroundings look like this: This means that SQL Server, aside from its internal waits, also depends on external waits and settings. As we can see in the picture above, SQL Server needs to have an interface in order to communicate with the surrounding clients over the network. For this communication, SQL Server uses protocol interfaces. I will not go into detail about which protocols are best, but you can read this article. Also, review the information about the TDS (Tabular data stream). As we all know, our system is only as fast as its slowest component. This means that when we look at our environment as a whole, the SQL Server might be a victim of external pressure, no matter how well we have tuned our database server performance. Let’s dive into an example: let’s say that we have a web server, hosting a web application which is using data from our SQL Server, hosted on another server. The network card of the web server for some reason is malfunctioning (think of a hardware failure, driver failure, or just improper setup) and does not send/receive data faster than 10Mbs. On the other end, our SQL Server will not be able to send/receive data at a faster rate either. This means that the application users will notify the support team and will say: “My data is coming very slow.” Now, let’s move on to a bit more exciting example: imagine that there is a similar setup as the example above – one web server and one database server, and the application is not using any stored procedure calls, but instead for every user request the application is sending 80kb query over the network to the SQL Server. (I really thought this does not happen in real life until I saw it one day.) So, what happens in this case? To make things worse, let’s say that the 80kb query text is submitted from the application to the SQL Server at least 100 times per minute, and as often as 300 times per minute in peak times. Here is what happens: in order for this query to reach the SQL Server, it will have to be broken into a of number network packets (according to the packet size settings) – and will travel over the network. On the other side, our SQL Server network card will receive the packets, will pass them to our network layer, the packets will get assembled, and eventually SQL Server will start processing the query – parsing, allegorizing, generating the query execution plan and so on. So far, we have already had a serious network overhead by waiting for the packets to reach our Database Engine. There will certainly be some processing overhead – until the database engine deals with the 80kb query and its 20 subqueries. The waits you see in the DMVs are actually collected from the point the query reaches the SQL Server and the packets are assembled. Let’s say that our query is processed and it finally returns 15000 rows. These rows have a certain size as well, depending on the data types returned. This means that the data will have converted to packages (depending on the network size package settings) and will have to reach the application server. There will also be waits, however, this time you will be able to see a wait type in the DMVs called ASYNC_NETWORK_IO. What this wait type indicates is that the client is not consuming the data fast enough and the network buffers are filling up. Recently Pinal Dave posted a blog on Client Statistics. What Client Statistics does is captures the physical flow characteristics of the query between the client(Management Studio, in this case) and the server and back to the client. As you see in the image, there are three categories: Query Profile Statistics, Network Statistics and Time Statistics. Number of server roundtrips–a roundtrip consists of a request sent to the server and a reply from the server to the client. For example, if your query has three select statements, and they are separated by ‘GO’ command, then there will be three different roundtrips. TDS Packets sent from the client – TDS (tabular data stream) is the language which SQL Server speaks, and in order for applications to communicate with SQL Server, they need to pack the requests in TDS packets. TDS Packets sent from the client is the number of packets sent from the client; in case the request is large, then it may need more buffers, and eventually might even need more server roundtrips. TDS packets received from server –is the TDS packets sent by the server to the client during the query execution. Bytes sent from client – is the volume of the data set to our SQL Server, measured in bytes; i.e. how big of a query we have sent to the SQL Server. This is why it is best to use stored procedures, since the reusable code (which already exists as an object in the SQL Server) will only be called as a name of procedure + parameters, and this will minimize the network pressure. Bytes received from server – is the amount of data the SQL Server has sent to the client, measured in bytes. Depending on the number of rows and the datatypes involved, this number will vary. But still, think about the network load when you request data from SQL Server. Client processing time – is the amount of time spent in milliseconds between the first received response packet and the last received response packet by the client. Wait time on server replies – is the time in milliseconds between the last request packet which left the client and the first response packet which came back from the server to the client. Total execution time – is the sum of client processing time and wait time on server replies (the SQL Server internal processing time) Here is an illustration of the Client-server communication model which should help you understand the mutual waits in a client-server environment. Keep in mind that a query with a large ‘wait time on server replies’ means the server took a long time to produce the very first row. This is usual on queries that have operators that need the entire sub-query to evaluate before they proceed (for example, sort and top operators). However, a query with a very short ‘wait time on server replies’ means that the query was able to return the first row fast. However a long ‘client processing time’ does not necessarily imply the client spent a lot of time processing and the server was blocked waiting on the client. It can simply mean that the server continued to return rows from the result and this is how long it took until the very last row was returned. The bottom line is that developers and DBAs should work together and think carefully of the resource utilization in the client-server environment. From experience I can say that so far I have seen only cases when the application developers and the Database developers are on their own and do not ask questions about the other party’s world. I would recommend using the Client Statistics tool during new development to track the performance of the queries, and also to find a synchronous way of utilizing resources between the client – server – client. Here is another example: think about similar setup as above, but add another server to the game. Let’s say that we keep our media on a separate server, and together with the data from our SQL Server we need to display some images on the webpage requested by our user. No matter how simple or complicated the logic to get the images is, if the images are 500kb each our users will get the page slowly and they will still think that there is something wrong with our data. Anyway, I don’t mean to get carried away too far from SQL Server. Instead, what I would like to say is that DBAs should also be aware of ‘the big picture’. I wrote a blog post a while back on this topic, and if you are interested, you can read it here about the big picture. And finally, here are some guidelines for monitoring the network performance and improving it: Run a trace and outline all queries that return more than 1000 rows (in Profiler you can actually filter and sort the captured trace by number of returned rows). This is not a set number; it is more of a guideline. The general thought is that no application user can consume that many rows at once. Ask yourself and your fellow-developers: ‘why?’. Monitor your network counters in Perfmon: Network Interface:Output queue length, Redirector:Network errors/sec, TCPv4: Segments retransmitted/sec and so on. Make sure to establish a good friendship with your network administrator (buy them coffee, for example J ) and get into a conversation about the network settings. Have them explain to you how the network cards are setup – are they standalone, are they ‘teamed’, what are the settings – full duplex and so on. Find some time to read a bit about networking. In this short blog post I hope I have turned your attention to ‘the big picture’ and the fact that there are other factors affecting our SQL Server, aside from its internal workings. As a further reading I would still highly recommend the Wait Stats series on this blog, also I would recommend you have the coffee break conversation with your network admin as soon as possible. This guest post is written by Feodor Georgiev. Read all the post in the Wait Types and Queue series. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL

  Read the article

• Adventures in MVVM &ndash; My ViewModel Base

  - by Brian Genisio's House Of Bilz

  More Adventures in MVVM First, I’d like to say: THIS IS NOT A NEW MVVM FRAMEWORK. I tend to believe that MVVM support code should be specific to the system you are building and the developers working on it.  I have yet to find an MVVM framework that does everything I want it to without doing too much.  Don’t get me wrong… there are some good frameworks out there.  I just like to pick and choose things that make sense for me.  I’d also like to add that some of these features only work in WPF.  As of Silveright 4, they don’t support binding to dynamic properties, so some of the capabilities are lost. That being said, I want to share my ViewModel base class with the world.  I have had several conversations with people about the problems I have solved using this ViewModel base.  A while back, I posted an article about some experiments with a “Rails Inspired ViewModel”.  What followed from those ideas was a ViewModel base class that I take with me and use in my projects.  It has a lot of features, all designed to reduce the friction in writing view models. I have put the code out on Codeplex under the project: ViewModelSupport. Finally, this article focuses on the ViewModel and only glosses over the View and the Model.  Without all three, you don’t have MVVM.  But this base class is for the ViewModel, so that is what I am focusing on. Features: Automatic Command Plumbing Property Change Notification Strongly Typed Property Getter/Setters Dynamic Properties Default Property values Derived Properties Automatic Method Execution Command CanExecute Change Notification Design-Time Detection What about Silverlight? Automatic Command Plumbing This feature takes the plumbing out of creating commands.  The common pattern for commands in a ViewModel is to have an Execute method as well as an optional CanExecute method.  To plumb that together, you create an ICommand Property, and set it in the constructor like so: Before public class AutomaticCommandViewModel { public AutomaticCommandViewModel() { MyCommand = new DelegateCommand(Execute_MyCommand, CanExecute_MyCommand); } public void Execute_MyCommand() { // Do something } public bool CanExecute_MyCommand() { // Are we in a state to do something? return true; } public DelegateCommand MyCommand { get; private set; } } With the base class, this plumbing is automatic and the property (MyCommand of type ICommand) is created for you.  The base class uses the convention that methods be prefixed with Execute_ and CanExecute_ in order to be plumbed into commands with the property name after the prefix.  You are left to be expressive with your behavior without the plumbing.  If you are wondering how CanExecuteChanged is raised, see the later section “Command CanExecute Change Notification”. After public class AutomaticCommandViewModel : ViewModelBase { public void Execute_MyCommand() { // Do something } public bool CanExecute_MyCommand() { // Are we in a state to do something? return true; } }   Property Change Notification One thing that always kills me when implementing ViewModels is how to make properties that notify when they change (via the INotifyPropertyChanged interface).  There have been many attempts to make this more automatic.  My base class includes one option.  There are others, but I feel like this works best for me. The common pattern (without my base class) is to create a private backing store for the variable and specify a getter that returns the private field.  The setter will set the private field and fire an event that notifies the change, only if the value has changed. Before public class PropertyHelpersViewModel : INotifyPropertyChanged { private string text; public string Text { get { return text; } set { if(text != value) { text = value; RaisePropertyChanged("Text"); } } } protected void RaisePropertyChanged(string propertyName) { var handlers = PropertyChanged; if(handlers != null) handlers(this, new PropertyChangedEventArgs(propertyName)); } public event PropertyChangedEventHandler PropertyChanged; } This way of defining properties is error-prone and tedious.  Too much plumbing.  My base class eliminates much of that plumbing with the same functionality: After public class PropertyHelpersViewModel : ViewModelBase { public string Text { get { return Get<string>("Text"); } set { Set("Text", value);} } }   Strongly Typed Property Getters/Setters It turns out that we can do better than that.  We are using a strongly typed language where the use of “Magic Strings” is often frowned upon.  Lets make the names in the getters and setters strongly typed: A refinement public class PropertyHelpersViewModel : ViewModelBase { public string Text { get { return Get(() => Text); } set { Set(() => Text, value); } } }   Dynamic Properties In C# 4.0, we have the ability to program statically OR dynamically.  This base class lets us leverage the powerful dynamic capabilities in our ecosystem. (This is how the automatic commands are implemented, BTW)  By calling Set(“Foo”, 1), you have now created a dynamic property called Foo.  It can be bound against like any static property.  The opportunities are endless.  One great way to exploit this behavior is if you have a customizable view engine with templates that bind to properties defined by the user.  The base class just needs to create the dynamic properties at runtime from information in the model, and the custom template can bind even though the static properties do not exist. All dynamic properties still benefit from the notifiable capabilities that static properties do. For any nay-sayers out there that don’t like using the dynamic features of C#, just remember this: the act of binding the View to a ViewModel is dynamic already.  Why not exploit it?  Get over it :) Just declare the property dynamically public class DynamicPropertyViewModel : ViewModelBase { public DynamicPropertyViewModel() { Set("Foo", "Bar"); } } Then reference it normally <TextBlock Text="{Binding Foo}" />   Default Property Values The Get() method also allows for default properties to be set.  Don’t set them in the constructor.  Set them in the property and keep the related code together: public string Text { get { return Get(() => Text, "This is the default value"); } set { Set(() => Text, value);} }   Derived Properties This is something I blogged about a while back in more detail.  This feature came from the chaining of property notifications when one property affects the results of another, like this: Before public class DependantPropertiesViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); RaisePropertyChanged("Percentage"); RaisePropertyChanged("Output"); } } public int Percentage { get { return (int)(100 * Score); } } public string Output { get { return "You scored " + Percentage + "%."; } } } The problem is: The setter for Score has to be responsible for notifying the world that Percentage and Output have also changed.  This, to me, is backwards.    It certainly violates the “Single Responsibility Principle.” I have been bitten in the rear more than once by problems created from code like this.  What we really want to do is invert the dependency.  Let the Percentage property declare that it changes when the Score Property changes. After public class DependantPropertiesViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); } } [DependsUpon("Score")] public int Percentage { get { return (int)(100 * Score); } } [DependsUpon("Percentage")] public string Output { get { return "You scored " + Percentage + "%."; } } }   Automatic Method Execution This one is extremely similar to the previous, but it deals with method execution as opposed to property.  When you want to execute a method triggered by property changes, let the method declare the dependency instead of the other way around. Before public class DependantMethodsViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); WhenScoreChanges(); } } public void WhenScoreChanges() { // Handle this case } } After public class DependantMethodsViewModel : ViewModelBase { public double Score { get { return Get(() => Score); } set { Set(() => Score, value); } } [DependsUpon("Score")] public void WhenScoreChanges() { // Handle this case } }   Command CanExecute Change Notification Back to Commands.  One of the responsibilities of commands that implement ICommand – it must fire an event declaring that CanExecute() needs to be re-evaluated.  I wanted to wait until we got past a few concepts before explaining this behavior.  You can use the same mechanism here to fire off the change.  In the CanExecute_ method, declare the property that it depends upon.  When that property changes, the command will fire a CanExecuteChanged event, telling the View to re-evaluate the state of the command.  The View will make appropriate adjustments, like disabling the button. DependsUpon works on CanExecute methods as well public class CanExecuteViewModel : ViewModelBase { public void Execute_MakeLower() { Output = Input.ToLower(); } [DependsUpon("Input")] public bool CanExecute_MakeLower() { return !string.IsNullOrWhiteSpace(Input); } public string Input { get { return Get(() => Input); } set { Set(() => Input, value);} } public string Output { get { return Get(() => Output); } set { Set(() => Output, value); } } }   Design-Time Detection If you want to add design-time data to your ViewModel, the base class has a property that lets you ask if you are in the designer.  You can then set some default values that let your designer see what things might look like in runtime. Use the IsInDesignMode property public DependantPropertiesViewModel() { if(IsInDesignMode) { Score = .5; } }   What About Silverlight? Some of the features in this base class only work in WPF.  As of version 4, Silverlight does not support binding to dynamic properties.  This, in my opinion, is a HUGE limitation.  Not only does it keep you from using many of the features in this ViewModel, it also keeps you from binding to ViewModels designed in IronRuby.  Does this mean that the base class will not work in Silverlight?  No.  Many of the features outlined in this article WILL work.  All of the property abstractions are functional, as long as you refer to them statically in the View.  This, of course, means that the automatic command hook-up doesn’t work in Silverlight.  You need to plumb it to a static property in order for the Silverlight View to bind to it.  Can I has a dynamic property in SL5?     Good to go? So, that concludes the feature explanation of my ViewModel base class.  Feel free to take it, fork it, whatever.  It is hosted on CodePlex.  When I find other useful additions, I will add them to the public repository.  I use this base class every day.  It is mature, and well tested.  If, however, you find any problems with it, please let me know!  Also, feel free to suggest patches to me via the CodePlex site.  :)

  Read the article

• Migrating from SQL Trace to Extended Events

  - by extended_events

  In SQL Server codenamed “Denali” we are moving our diagnostic tracing capabilities forward by building a system on top of Extended Events. With every new system you face the specter of migration which is always a bit of a hassle. I’m obviously motivated to see everyone move their diagnostic tracing systems over to the new extended events based system, so I wanted to make sure we lowered the bar for the migration process to help ease your trials. In my initial post on Denali CTP 1 I described a couple tables that we created that will help map the existing SQL Trace Event Classes to the equivalent Extended Events events. In this post I’ll describe the tables in a bit more details, explain the relationship between the SQL Trace objects (Event Class & Column) and Extended Event objects (Events & Actions) and at the end provide some sample code for a managed stored procedure that will take an existing SQL Trace session (eg. a trace that you can see in sys.Traces) and converts it into event session DDL. Can you relate? In some ways, SQL Trace and Extended Events is kind of like the Standard and Metric measuring systems in the United States. If you spend too much time trying to figure out how to convert between the two it will probably make your head hurt. It’s often better to just use the new system without trying to translate between the two. That said, people like to relate new things to the things they’re comfortable with, so, with some trepidation, I will now explain how these two systems are related to each other. First, some terms… SQL Trace is made up of Event Classes and Columns. The Event Class occurs as the result of some activity in the database engine, for example, SQL:Batch Completed fires when a batch has completed executing on the server. Each Event Class can have any number of Columns associated with it and those Columns contain the data that is interesting about the Event Class, such as the duration or database name. In Extended Events we have objects named Events, EventData field and Actions. The Event (some people call this an xEvent but I’ll stick with Event) is equivalent to the Event Class in SQL Trace since it is the thing that occurs as the result of some activity taking place in the server. An  EventData field (from now on I’ll just refer to these as fields) is a piece of information that is highly correlated with the event and is always included as part of the schema of an Event. An Action is something that can be associated with any Event and it will cause some additional “action” to occur when ever the parent Event occurs. Actions can do a number of different things for example, there are Actions that collect additional data and, take memory dumps. When mapping SQL Trace onto Extended Events, Columns are covered by a combination of both fields and Actions. Knowing exactly where a Column is covered by a field and where it is covered by an Action is a bit of an art, so we created the mapping tables to make you an Artist without the years of practice. Let me draw you a map. Event Mapping The table dbo.trace_xe_event_map exists in the master database with the following structure: Column_name Type trace_event_id smallint package_name nvarchar xe_event_name nvarchar By joining this table sys.trace_events using trace_event_id and to the sys.dm_xe_objects using xe_event_name you can get a fair amount of information about how Event Classes are related to Events. The most basic query this lends itself to is to match an Event Class with the corresponding Event. SELECT     t.trace_event_id,     t.name [event_class],     e.package_name,     e.xe_event_name FROM sys.trace_events t INNER JOIN dbo.trace_xe_event_map e     ON t.trace_event_id = e.trace_event_id There are a couple things you’ll notice as you peruse the output of this query: For the most part, the names of Events are fairly close to the original Event Class; eg. SP:CacheMiss == sp_cache_miss, and so on. We’ve mostly stuck to a one to one mapping between Event Classes and Events, but there are a few cases where we have combined when it made sense. For example, Data File Auto Grow, Log File Auto Grow, Data File Auto Shrink & Log File Auto Shrink are now all covered by a single event named database_file_size_change. This just seemed like a “smarter” implementation for this type of event, you can get all the same information from this single event (grow/shrink, Data/Log, Auto/Manual growth) without having multiple different events. You can use Predicates if you want to limit the output to just one of the original Event Class measures. There are some Event Classes that did not make the cut and were not migrated. These fall into two categories; there were a few Event Classes that had been deprecated, or that just did not make sense, so we didn’t migrate them. (You won’t find an Event related to mounting a tape – sorry.) The second class is bigger; with rare exception, we did not migrate any of the Event Classes that were related to Security Auditing using SQL Trace. We introduced the SQL Audit feature in SQL Server 2008 and that will be the compliance and auditing feature going forward. Doing this is a very deliberate decision to support separation of duties for DBAs. There are separate permissions required for SQL Audit and Extended Events tracing so you can assign these tasks to different people if you choose. (If you’re wondering, the permission for Extended Events is ALTER ANY EVENT SESSION, which is covered by CONTROL SERVER.) Action Mapping The table dbo.trace_xe_action_map exists in the master database with the following structure: Column_name Type trace_column_id smallint package_name nvarchar xe_action_name nvarchar You can find more details by joining this to sys.trace_columns on the trace_column_id field. SELECT     c.trace_column_id,     c.name [column_name],     a.package_name,     a.xe_action_name FROM sys.trace_columns c INNER JOIN    dbo.trace_xe_action_map a     ON c.trace_column_id = a.trace_column_id If you examine this list, you’ll notice that there are relatively few Actions that map to SQL Trace Columns given the number of Columns that exist. This is not because we forgot to migrate all the Columns, but because much of the data for individual Event Classes is included as part of the EventData fields of the equivalent Events so there is no need to specify them as Actions. Putting it all together If you’ve spent a bunch of time figuring out the inner workings of SQL Trace, and who hasn’t, then you probably know that the typically set of Columns you find associated with any given Event Class in SQL Profiler is not fix, but is determine by the contents of the table sys.trace_event_bindings. We’ve used this table along with the mapping tables to produce a list of Event + Action combinations that duplicate the SQL Profiler Event Class definitions using the following query, which you can also find in the Books Online topic How To: View the Extended Events Equivalents to SQL Trace Event Classes. USE MASTER; GO SELECT DISTINCT    tb.trace_event_id,    te.name AS 'Event Class',    em.package_name AS 'Package',    em.xe_event_name AS 'XEvent Name',    tb.trace_column_id,    tc.name AS 'SQL Trace Column',    am.xe_action_name as 'Extended Events action' FROM (sys.trace_events te LEFT OUTER JOIN dbo.trace_xe_event_map em    ON te.trace_event_id = em.trace_event_id) LEFT OUTER JOIN sys.trace_event_bindings tb    ON em.trace_event_id = tb.trace_event_id LEFT OUTER JOIN sys.trace_columns tc    ON tb.trace_column_id = tc.trace_column_id LEFT OUTER JOIN dbo.trace_xe_action_map am    ON tc.trace_column_id = am.trace_column_id ORDER BY te.name, tc.name As you might imagine, it’s also possible to map an existing trace definition to the equivalent event session by judicious use of fn_trace_geteventinfo joined with the two mapping tables. This query extracts the list of Events and Actions equivalent to the trace with ID = 1, which is most likely the Default Trace. You can find this query, along with a set of other queries and steps required to migrate your existing traces over to Extended Events in the Books Online topic How to: Convert an Existing SQL Trace Script to an Extended Events Session. USE MASTER; GO DECLARE @trace_id int SET @trace_id = 1 SELECT DISTINCT el.eventid, em.package_name, em.xe_event_name AS 'event'    , el.columnid, ec.xe_action_name AS 'action' FROM (sys.fn_trace_geteventinfo(@trace_id) AS el    LEFT OUTER JOIN dbo.trace_xe_event_map AS em       ON el.eventid = em.trace_event_id) LEFT OUTER JOIN dbo.trace_xe_action_map AS ec    ON el.columnid = ec.trace_column_id WHERE em.xe_event_name IS NOT NULL AND ec.xe_action_name IS NOT NULL You’ll notice in the output that the list doesn’t include any of the security audit Event Classes, as I wrote earlier, those were not migrated. But wait…there’s more! If this were an infomercial there’d by some obnoxious guy next to me blogging “Well Mike…that’s pretty neat, but I’m sure you can do more. Can’t you make it even easier to migrate from SQL Trace?”  Needless to say, I’d blog back, in an overly excited way, “You bet I can' obnoxious blogger side-kick!” What I’ve got for you here is a Extended Events Team Blog only special – this tool will not be sold in any store; it’s a special offer for those of you reading the blog. I’ve wrapped all the logic of pulling the configuration information out of an existing trace and and building the Extended Events DDL statement into a handy, dandy CLR stored procedure. Once you load the assembly and register the procedure you just supply the trace id (from sys.traces) and provide a name for the event session. Run the procedure and out pops the DDL required to create an equivalent session. Any aspects of the trace that could not be duplicated are included in comments within the DDL output. This procedure does not actually create the event session – you need to copy the DDL out of the message tab and put it into a new query window to do that. It also requires an existing trace (but it doesn’t have to be running) to evaluate; there is no functionality to parse t-sql scripts. I’m not going to spend a bunch of time explaining the code here – the code is pretty well commented and hopefully easy to follow. If not, you can always post comments or hit the feedback button to send us some mail. Sample code: TraceToExtendedEventDDL   Installing the procedure Just in case you’re not familiar with installing CLR procedures…once you’ve compile the assembly you can load it using a script like this: -- Context to master USE master GO -- Create the assembly from a shared location. CREATE ASSEMBLY TraceToXESessionConverter FROM 'C:\Temp\TraceToXEventSessionConverter.dll' WITH PERMISSION_SET = SAFE GO -- Create a stored procedure from the assembly. CREATE PROCEDURE CreateEventSessionFromTrace @trace_id int, @session_name nvarchar(max) AS EXTERNAL NAME TraceToXESessionConverter.StoredProcedures.ConvertTraceToExtendedEvent GO Enjoy! -Mike

  Read the article

• Best Practices - updated: which domain types should be used to run applications

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains). This is an updated and enlarged version of the post on this topic originally posted October 2012. One frequent question "what type of domain should I use to run applications?" There used to be a simple answer: "run applications in guest domains in almost all cases", but now there are more things to consider. Enhancements to Oracle VM Server for SPARC and introduction of systems like the current SPARC servers including the T4 and T5 systems, the Oracle SuperCluster T5-8 and Oracle SuperCluster M6-32 provide scale and performance much higher than the original servers that ran domains. Single-CPU performance, I/O capacity, memory sizes, are much larger now, and far more demanding applications are now being hosted in logical domains. The general advice continues to be "use guest domains in almost all cases", meaning, "use virtual I/O rather than physical I/O", unless there is a specific reason to use the other domain types. The sections below will discuss the criteria for choosing between domain types. Review: division of labor and types of domain Oracle VM Server for SPARC offloads management and I/O functionality from the hypervisor to domains (also called virtual machines), providing a modern alternative to older VM architectures that use a "thick", monolithic hypervisor. This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, further improving reliability and security. Oracle VM Server for SPARC defines the following types of domain, each with their own roles: Control domain - management control point for the server, runs the logical domain daemon and constraints engine, and is used to configure domains and manage resources. The control domain is the first domain to boot on a power-up, is always an I/O domain, and is usually a service domain as well. It doesn't have to be, but there's no reason to not leverage it for virtual I/O services. There is one control domain per T-series system, and one per Physical Domain (PDom) on an M5-32 or M6-32 system. M5 and M6 systems can be physically domained, with logical domains within the physical ones. I/O domain - a domain that has been assigned physical I/O devices. The devices may be one more more PCIe root complexes (in which case the domain is also called a root complex domain). The domain has native access to all the devices on the assigned PCIe buses. The devices can be any device type supported by Solaris on the hardware platform. a SR-IOV (Single-Root I/O Virtualization) function. SR-IOV lets a physical device (also called a physical function) or PF) be subdivided into multiple virtual functions (VFs) which can be individually assigned directly to domains. SR-IOV devices currently can be Ethernet or InfiniBand devices. direct I/O ownership of one or more PCI devices residing in a PCIe bus slot. The domain has direct access to the individual devices An I/O domain has native performance and functionality for the devices it owns, unmediated by any virtualization layer. It may also have virtual devices. Service domain - a domain that provides virtual network and disk devices to guest domains. The services are defined by commands that are run in the control domain. It usually is an I/O domain as well, in order for it to have devices to virtualize and serve out. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Device considerations Consider the following when choosing between virtual devices and physical devices: Virtual devices provide the best flexibility - they can be dynamically added to and removed from a running domain, and you can have a large number of them up to a per-domain device limit. Virtual devices are compatible with live migration - domains that exclusively have virtual devices can be live migrated between servers supporting domains. On the other hand: Physical devices provide the best performance - in fact, native "bare metal" performance. Virtual devices approach physical device throughput and latency, especially with virtual network devices that can now saturate 10GbE links, but physical devices are still faster. Physical I/O devices do not add load to service domains - all the I/O goes directly from the I/O domain to the device, while virtual I/O goes through service domains, which must be provided sufficient CPU and memory capacity. Physical I/O devices can be other than network and disk - we virtualize network, disk, and serial console, but physical devices can be the wide range of attachable certified devices, including things like tape and CDROM/DVD devices. In some cases the lines are now blurred: virtual devices have better performance than previously: starting with Oracle VM Server for SPARC 3.1 there is near-native virtual network performance. There is more flexibility with physical devices than before: SR-IOV devices can now be dynamically reconfigured on domains. Tradeoffs one used to have to make are now relaxed: you can often have the flexibility of virtual I/O with performance that previously required physical I/O. You can have the performance and isolation of SR-IOV with the ability to dynamically reconfigure it, just like with virtual devices. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI buses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain that is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure, as described in Availability Best Practices - Avoiding Single Points of Failure . Guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device does not result in an application outage. This also permits "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O buses, so there is more I/O capacity that can be used for applications. Increased server capacity made it attractive to run more vertically-scaled applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the Oracle SuperCluster engineered systems mentioned previously. In those engineered systems, I/O domains are used for high performance applications with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. Not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O to guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm command must be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. For reference, an excellent guide to secure deployment of domains by Stefan Hinker is at Secure Deployment of Oracle VM Server for SPARC. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. They should be considered the default domain type to use unless there is a specific requirement that mandates an I/O domain. I/O domains can be used for applications with the highest performance requirements. Single Root I/O Virtualization (SR-IOV) makes this more attractive by giving direct I/O access to more domains, and by permitting dynamic reconfiguration of SR-IOV devices. Today's larger systems provide multiple PCIe buses - for example, 16 buses on the T5-8 - making it possible to configure multiple I/O domains each owning their own bus. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so interruption of service in one service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. Oracle SuperCluster uses the control domain for applications, but it is an exception. It's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity servers that run Oracle VM Server for SPARC are attractive for applications with the most demanding resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide peak performance for critical applications. That said, the improved virtual device performance in Oracle VM Server means that the default choice should still be guest domains with virtual I/O.

  Read the article

• CodePlex Daily Summary for Saturday, May 29, 2010

  CodePlex Daily Summary for Saturday, May 29, 2010New ProjectsASP.NET MVC Time Planner: ASP.NET MVC based time planner is example solution that introduces ASP.NET MVC, MSSQL AJAX and jQuery development.Blit Scripting Engine: Blit Scripting Engine provides developers using Microsofts XNA Framework the ability to implement a scripting solution to their games and other pro...Expression Evaluator: This is an article on how to build a basic expression evaluator. It can evaluate any numerical expression combined with trigonometric functions for...Log Analyzer: This project has the aim to help developers to see live log/trace from their application applying visual styles to the grabbed text.LParse: LParse is a monadic parser combinator library, similar to Haskell’s Parsec. It allows you create parsers on C# language. All parsers are first-clas...NeatHtml: NeatHtml™ is a highly-portable open source website component that displays untrusted content securely, efficiently, and accessibly. Untrusted conte...NeatUpload: The NeatUpload ™ ASP.NET component allows developers to stream uploaded files to storage (filesystem or database) and allows users to monitor uplo...NSoup: NSoup is a .NET port of the jsoup (http://jsoup.org) HTML parser and sanitizer originally written in Java. jsoup originally written by Jonathan He...Ordering: c# farm softwarephone7: Project for Windows Phone 7RestCall: A very simple library to make a simple REST call and deserialize to an object. It uses WCF REST Starter Kit and the .net serializer in: System.Runt...SCSM CSV Connector: CSV Connector allows you to specify a data file and mapping location and a scheuled interval in minutes. At each scheduled interval Service Manage...Silverlight Adorner Control: An Adorner is a custom FrameworkElement that is bound to a FrameworkElement and displays information about that element 'above' the element without...Simple Stupid Tools: Simple Stupid ToolsSQScriptRunner: Simple Quick Script Runner allows an administrator to run T-SQL Scripts against one or more servers with common characteristics. For example, an m...ssisassembly: ssisassemblySSRS Report RoboCopy: a tools used to pass a report from a server to anotherTeam Foundation Server Explorer: A standalone Team Foundation Server explorer that can be used to view and manage source files.New Releases(SocketCoder) Full Silverlight Web Video/Voice Conferencing: SocketCoderWebConferencingSystem_Compiled: Installing The Server: 1- before you start you should allow the SocketCoderWCService.MainService.exe service to use the TCP ports from 4528 to 4532...ASP.NET MVC Time Planner: MVC Time Planner - v0.0.1.0: First public alpha of MVC Time Planner is now available. I got a lot of letters from my ASP.NET blog readers who are interested in this example sol...AvalonDock: AvalonDock 1.3.3384: Welcome to AvalonDock 1.3 This is the new version of AvalonDock targetting .NET 4 These are the main features that are included: - Target Microso...Blit Scripting Engine: Blit Scripting Engine 1.0: This marks the initial release of the Blit Scripting Engine. It provides the ability to compile scripts to an assembly, load pre-compiled assemblie...Community Forums NNTP bridge: Community Forums NNTP Bridge V12: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V13: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...CSharp Intellisense: V2.4: bug fix: Pascal Casing, Single Selection and other selection errorsExpression Evaluator: Expression Evaluator - Visual Studio 2010: Visual Studio 2010 VersionFacebook Graph Toolkit: Preview 2: Preview 2 updates the source to be much more like the Facebook PHP-SDK. Additionally, the code has been updated to follow StyleCop framework rules....Facebook Graph Toolkit: Preview 3: Rest API now working although not fully tested. Removed JsonObject and JsonArray custom dynamic objects in favor of standard ExpandoObject and List...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.1 beta Released: Hi, Today we are releasing the two most awaited features i.e, Logarithmic axis and auto update of y-axis while Scrolling and Zooming. * Logar...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.4 beta Released: Hi, Today we are releasing the two most awaited features i.e, Logarithmic axis and auto update of y-axis while Scrolling and Zooming. Logarithmic...Fulcrum: Fulcrum 1.0: Initial release.Git Source Control Provider: V 0.3: V 0.3 Add automatic status refresh when files in solution folder changedIBCSharp: IBCSharp 1.04: What IBCSharp 1.04.zip unzips to: http://i50.tinypic.com/205qofl.png IBCSharp Change Log 1.04 - 5/28/2010 Updated IBClient.dll to IB API version...MapWindow6: MapWindow 6.0 May 28 2010: This shifts the projection library to System.Spatial.Projections instead of MWProj4. This also fixes a meter/feet conversion error.Microsoft Health Common User Interface: Release 8.2.51.000: This is version 8.2 of the Microsoft® Health Common User Interface Control Toolkit. This release includes code updates to controls as listed below....NeatHtml: NeatHtml-trunk.221: Adds support for Internet Explorer Mobile 6.NeatUpload: NeatUpload-1.3.25: Fixes the following bugs: SWFUpload.swf could not be served by a CDN because it was embedded without setting allowScriptAccess="always". NeatUpl...NSoup: NSoup 0.1: Initial port release. Corresponds to jsoup version 0.3.1.Numina Application/Security Framework: Numina.Framework Core 53265: Visit http://framework.numina.net to help get you started.Nuntio Content: Nuntio Content 4.2.0: This upgrades MagicContent instances to the latest version that is now called NuntioContent. While this release is quite stable it is still marked ...patterns & practices: Composite WPF and Silverlight: ProjectLinker Source for VS2010 - May 2010: The ProjectLinker helps keep the source for two projects in sync by automatically creating a linked file in one project as files are added in anoth...phone7: Prism for WP7: This the first version of prism for wp7SCSM CSV Connector: SCSM CSV Connector Version 0.1: Release Notes This is the first release of the SCSM CSV Connector solution. It is an 'alpha' release and has only been tested by the developers on ...Silverlight Adorner Control: 1.0: Initial releaseSilverlight Web Comic: Comic 1.1.1: Comic Beta with functionality to button newSilverlight Web Comic: Web Comic 1.1: This version has a little implementation no visible about the future versions, options to new, save, and load. The next version has a better review...Simple.NET: Simple.Mocking 1.0.0.6: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...Sonic.Net: Sonic.Net v1.0.1 For Unity 2.0: This Version is a port to VS2010 of the codebase with support for unity 2.0. note: currently follows the xsd schema of the previous unity Configur...Squiggle - A Free open source Lan Messenger: Squiggle 1.0.2: v1.0 Release.Team Foundation Server Explorer: Beta 1: The first public beta release of the TFS Explorer.thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.8): Bug fix release with the following fix: When an XmlArrayAttribute decorated member has IsNullable=false, and the List<T> or Collection option is s...VCC: Latest build, v2.1.30528.0: Automatic drop of latest buildVisual Studio 2010 AutoScroller Extension: AutoScroller v0.4: A Visual studio 2010 auto-scroller extension. Simply hold down your middle mouse button and drag the mouse in the direction you wish to scroll, fu...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.10.03: !!Whats New Added CKEditor 3.3 Revision 5542 changes Options: Default Toolbar Set to Full for Administrators Browser Window: Increased Size of ...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsAStar.netpatterns & practices – Enterprise LibraryBlogEngine.NETGMap.NET - Great Maps for Windows Forms & PresentationCommunity Forums NNTP bridgeRawrSqlServerExtensionsCustomer Portal Accelerator for Microsoft Dynamics CRMPAPpatterns & practices: Windows Azure Security Guidance

  Read the article

• CodePlex Daily Summary for Saturday, October 13, 2012

  CodePlex Daily Summary for Saturday, October 13, 2012Popular ReleasesArduino Installer For Atmel Studio 6: Arduino Installer - Version 1.01 Beta2: Bug Fixes - Handling spaces in avrdude path - Handling spaces in avrdude config path - Handling spaces in project names - Handling spaces in project path - hard coded directories pointing to my space has been removed New Features - Total of 7 project templates included - C program - C library - C++ program - C++ library - Arduino Unit Tests - Arduino library - Arduino program (sketch) - Group all supporting scripts under a script directory in the solution - Support for calling multiple pre-...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:GoogleMap ID="GoogleMap1" runat="server" MapType="HY...mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...OstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...The GLMET Project: Shutdown Manager: Shutdown, Log off and Restart Timer Set time for shutdown, log off and restartClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.New ProjectsAaron.Core: It's a special core be used to help your project become standardization. It provides the standard platform, including core systems, data flows,...AFSSignarlRServer: Server ready tryAgileFramework: Agile Framework in order to build easily application based on WCF, NHibernate , WPF, and multithreadingala, A Programming Language: ala, A Programming LanguageBaseSRS (Basic Service Request System): BaseSRS is a basic "Service Request System" or "SRS" which can be adapted and used by anyone. ContainerVariations: ContainerVariations is a collection of similar unit tests projects, each applied to a different Inversion of Control container. If successful, it will provide a consistent and comprehensive set of examples for popular .NET IoC containers. It is developed in C#.COST Policies - ART Work: COST Policies: ART Work ? ??????? ?????? ?? ??????? ?? ??????????: -baceCP -guideCPCS Script Runner: Provide users an easy way of executing C# programs (scripts) that are compiled on the fly.DbUtility: DbUtility is a free utility to display databases info like, size, backup date, instance name, database name, last backup log date, with export to excel feature.EchoLink Monitor: EchoLink Monitor is a management tool for EchoLink sysops maintaining remote EchoLink nodes.NextUI: We are on the way...Notas Alexandre: Apenas teste ainda...será modificado depois...Orchard CMS Amba.HtmlBlocks: Amba.HtmlBlocks module for Orchard CMS 1.5.1Portable Basemap Server: multiple map data source<--PBS-->multiple map apiRonYee: ??????????????。 ????（viewer）???????????????????，???????????????。 ????（customer）?????????????????，???????，?????????????????。 ??????（user）??????????????????。ShangWu: ????，???StoreIpAddress: Examine different means to store IP addressesSummon for Umbraco: Summon for Umbraco is a .NET solution for Summon API, provided by Serials Solutions.teasingg: this is for testing code plexWeb Scripting and Content Creation assignment: A stub project.WriteableBitmapEx for Windows Embedded: WriteableBitmapEx for Windows Embedded Compact 7 and Silverlight for Windows Embedded. Requires XAML In The Hand for managed code development.X.Web.Sitemap: X.Web.Sitemap is a part of X-Framework library. X.Web.Sitemap allows quickly and easily generate a Google-compatible filesZeropaste: A pastebin with minimal features.??: ?????EPUB????。

  Read the article

• A Closable jQuery Plug-in

  - by Rick Strahl

  In my client side development I deal a lot with content that pops over the main page. Be it data entry ‘windows’ or dialogs or simple pop up notes. In most cases this behavior goes with draggable windows, but sometimes it’s also useful to have closable behavior on static page content that the user can choose to hide or otherwise make invisible or fade out. Here’s a small jQuery plug-in that provides .closable() behavior to most elements by using either an image that is provided or – more appropriately by using a CSS class to define the picture box layout. /* * * Closable * * Makes selected DOM elements closable by making them * invisible when close icon is clicked * * Version 1.01 * @requires jQuery v1.3 or later * * Copyright (c) 2007-2010 Rick Strahl * http://www.west-wind.com/ * * Licensed under the MIT license: * http://www.opensource.org/licenses/mit-license.php Support CSS: .closebox { position: absolute; right: 4px; top: 4px; background-image: url(images/close.gif); background-repeat: no-repeat; width: 14px; height: 14px; cursor: pointer; opacity: 0.60; filter: alpha(opacity="80"); } .closebox:hover { opacity: 0.95; filter: alpha(opacity="100"); } Options: * handle Element to place closebox into (like say a header). Use if main element and closebox container are two different elements. * closeHandler Function called when the close box is clicked. Return true to close the box return false to keep it visible. * cssClass The CSS class to apply to the close box DIV or IMG tag. * imageUrl Allows you to specify an explicit IMG url that displays the close icon. If used bypasses CSS image styling. * fadeOut Optional provide fadeOut speed. Default no fade out occurs */ (function ($) { $.fn.closable = function (options) { var opt = { handle: null, closeHandler: null, cssClass: "closebox", imageUrl: null, fadeOut: null }; $.extend(opt, options); return this.each(function (i) { var el = $(this); var pos = el.css("position"); if (!pos || pos == "static") el.css("position", "relative"); var h = opt.handle ? $(opt.handle).css({ position: "relative" }) : el; var div = opt.imageUrl ? $("<img>").attr("src", opt.imageUrl).css("cursor", "pointer") : $("<div>"); div.addClass(opt.cssClass) .click(function (e) { if (opt.closeHandler) if (!opt.closeHandler.call(this, e)) return; if (opt.fadeOut) $(el).fadeOut(opt.fadeOut); else $(el).hide(); }); if (opt.imageUrl) div.css("background-image", "none"); h.append(div); }); } })(jQuery); The plugin can be applied against any selector that is a container (typically a div tag). The close image or close box is provided typically by way of a CssClass - .closebox by default – which supplies the image as part of the CSS styling. The default styling for the box looks something like this: .closebox { position: absolute; right: 4px; top: 4px; background-image: url(images/close.gif); background-repeat: no-repeat; width: 14px; height: 14px; cursor: pointer; opacity: 0.60; filter: alpha(opacity="80"); } .closebox:hover { opacity: 0.95; filter: alpha(opacity="100"); } Alternately you can also supply an image URL which overrides the background image in the style sheet. I use this plug-in mostly on pop up windows that can be closed, but it’s also quite handy for remove/delete behavior in list displays like this: you can find this sample here to look to play along: http://www.west-wind.com/WestwindWebToolkit/Samples/Ajax/AmazonBooks/BooksAdmin.aspx For closable windows it’s nice to have something reusable because in my client framework there are lots of different kinds of windows that can be created: Draggables, Modal Dialogs, HoverPanels etc. and they all use the client .closable plug-in to provide the closable operation in the same way with a few options. Plug-ins are great for this sort of thing because they can also be aggregated and so different components can pick and choose the behavior they want. The window here is a draggable, that’s closable and has shadow behavior and the server control can simply generate the appropriate plug-ins to apply to the main <div> tag: $().ready(function() { $('#ctl00_MainContent_panEditBook') .closable({ handle: $('#divEditBook_Header') }) .draggable({ dragDelay: 100, handle: '#divEditBook_Header' }) .shadow({ opacity: 0.25, offset: 6 }); }) The window is using the default .closebox style and has its handle set to the header bar (Book Information). The window is just closable to go away so no event handler is applied. Actually I cheated – the actual page’s .closable is a bit more ugly in the sample as it uses an image from a resources file: .closable({ imageUrl: '/WestWindWebToolkit/Samples/WebResource.axd?d=TooLongAndNastyToPrint', handle: $('#divEditBook_Header')}) so you can see how to apply a custom image, which in this case is generated by the server control wrapping the client DragPanel. More interesting maybe is to apply the .closable behavior to list scenarios. For example, each of the individual items in the list display also are .closable using this plug-in. Rather than having to define each item with Html for an image, event handler and link, when the client template is rendered the closable behavior is attached to the list. Here I’m using client-templating and the code that this is done with looks like this: function loadBooks() { showProgress(); // Clear the content $("#divBookListWrapper").empty(); var filter = $("#" + scriptVars.lstFiltersId).val(); Proxy.GetBooks(filter, function(books) { $(books).each(function(i) { updateBook(this); showProgress(true); }); }, onPageError); } function updateBook(book,highlight) { // try to retrieve the single item in the list by tag attribute id var item = $(".bookitem[tag=" +book.Pk +"]"); // grab and evaluate the template var html = parseTemplate(template, book); var newItem = $(html) .attr("tag", book.Pk.toString()) .click(function() { var pk = $(this).attr("tag"); editBook(this, parseInt(pk)); }) .closable({ closeHandler: function(e) { removeBook(this, e); }, imageUrl: "../../images/remove.gif" }); if (item.length > 0) item.after(newItem).remove(); else newItem.appendTo($("#divBookListWrapper")); if (highlight) { newItem .addClass("pulse") .effect("bounce", { distance: 15, times: 3 }, 400); setTimeout(function() { newItem.removeClass("pulse"); }, 1200); } } Here the closable behavior is applied to each of the items along with an event handler, which is nice and easy compared to having to embed the right HTML and click handling into each item in the list individually via markup. Ideally though (and these posts make me realize this often a little late) I probably should set up a custom cssClass to handle the rendering – maybe a CSS class called .removebox that only changes the image from the default box image. This example also hooks up an event handler that is fired in response to the close. In the list I need to know when the remove button is clicked so I can fire of a service call to the server to actually remove the item from the database. The handler code can also return false; to indicate that the window should not be closed optionally. Returning true will close the window. You can find more information about the .closable class behavior and options here: .closable Documentation Plug-ins make Server Control JavaScript much easier I find this plug-in immensely useful especial as part of server control code, because it simplifies the code that has to be generated server side tremendously. This is true of plug-ins in general which make it so much easier to create simple server code that only generates plug-in options, rather than full blocks of JavaScript code.  For example, here’s the relevant code from the DragPanel server control which generates the .closable() behavior: if (this.Closable && !string.IsNullOrEmpty(DragHandleID) ) { string imageUrl = this.CloseBoxImage; if (imageUrl == "WebResource" ) imageUrl = ScriptProxy.GetWebResourceUrl(this, this.GetType(), ControlResources.CLOSE_ICON_RESOURCE); StringBuilder closableOptions = new StringBuilder("imageUrl: '" + imageUrl + "'"); if (!string.IsNullOrEmpty(this.DragHandleID)) closableOptions.Append(",handle: $('#" + this.DragHandleID + "')"); if (!string.IsNullOrEmpty(this.ClientDialogHandler)) closableOptions.Append(",handler: " + this.ClientDialogHandler); if (this.FadeOnClose) closableOptions.Append(",fadeOut: 'slow'"); startupScript.Append(@" .closable({ " + closableOptions + "})"); } The same sort of block is then used for .draggable and .shadow which simply sets options. Compared to the code I used to have in pre-jQuery versions of my JavaScript toolkit this is a walk in the park. In those days there was a bunch of JS generation which was ugly to say the least. I know a lot of folks frown on using server controls, especially the UI is client centric as the example is. However, I do feel that server controls can greatly simplify the process of getting the right behavior attached more easily and with the help of IntelliSense. Often the script markup is easier is especially if you are dealing with complex, multiple plug-in associations that often express more easily with property values on a control. Regardless of whether server controls are your thing or not this plug-in can be useful in many scenarios. Even in simple client-only scenarios using a plug-in with a few simple parameters is nicer and more consistent than creating the HTML markup over and over again. I hope some of you find this even a small bit as useful as I have. Related Links Download jquery.closable West Wind Web Toolkit jQuery Plug-ins © Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery   ASP.NET  JavaScript  

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #003

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 This was the first year of my blogging and lots of new things I was learning as I go. I was indeed an infant in blogging a few years ago. However, as time passed by I have learned a lot. This year was year of experiments and new learning. 2007 Working as a full time DBA I often encoutered various errors and I started to learn how to avoid those error and document the same. ERROR Msg 5174 Each file size must be greater than or equal to 512 KB Whenever I see this error I wonder why someone is trying to attempt a database which is extremely small. Anyway, it does not matter what I think I keep on seeing this error often in industries. Anyway the solution of the error is equally interesting – just created larger database. Dilbert Humor This was very first encounter with database humor and I started to love it. It does not matter how many time we read this cartoon it does not get old. Generate Script with Data from Database – Database Publishing Wizard Generating schema script with data is one of the most frequently performed tasks among SQL Server Data Professionals. There are many ways to do the same. In the above article I demonstrated that how we can use the Database Publishing Wizard to accomplish the same. It was new to me at that time but I have not seen much of the adoption of the same still in the industry. Here is one of my videos where I demonstrate how we can generate data with schema. 2008 Delete Backup History – Cleanup Backup History Deleting backup history is important too but should be done carefully. If this is not carried out at regular interval there is good chance that MSDB will be filled up with all the old history. Every organization is different. Some would like to keep the history for 30 days and some for a year but there should be some limit. One should regularly archive the database backup history. South Asia MVP Open Days 2008 This was my very first year Microsoft MVP. I had Indeed big blast at the event and the fun was incredible. After this event I have attended many different MVP events but the fun and learning this particular event presented was amazing and just like me many others are not able to forget the same. Here are other links related to the event: South Asia MVP Open Day 2008 – Goa South Asia MVP Open Day 2008 – Goa – Day 1 South Asia MVP Open Day 2008 – Goa – Day 2 South Asia MVP Open Day 2008 – Goa – Day 3 2009 Enable or Disable Constraint  This is very simple script but I personally keep on forgetting it so I had blogged it. Till today, I keep on referencing this again and again as sometime a very little thing is hard to remember. Policy Based Management – Create, Evaluate and Fix Policies This article will cover the most spectacular feature of SQL 2008 – Policy-based management and how the configuration of SQL Server with policy-based management architecture can make a powerful difference. Policy based management is loaded with several advantages. It can help you implement various policies for reliable configuration of the system. It also provides additional administrative assistance to DBAs and helps them effortlessly manage various tasks of SQL Server across the enterprise. SQLPASS 2009 – My Very First SQPASS Experience Just Brilliant! I never had an experience such a thing in my life. SQL SQL and SQL – all around SQL! I am listing my own reasons here in order of importance to me. Networking with SQL fellows and experts Putting face to the name or avatar Learning and improving my SQL skills Understanding the structure of the largest SQL Server Professional Association Attending my favorite training sessions Since last time I have never missed a single time this event. This event is my favorite event and something keeps me going. Here are additional post related SQLPASS 2009. SQL PASS Summit, Seattle 2009 – Day 1 SQL PASS Summit, Seattle 2009 – Day 2 SQL PASS Summit, Seattle 2009 – Day 3 SQL PASS Summit, Seattle 2009 – Day 4 2010 Get All the Information of Database using sys.databases Even though we believe that we know everything about our database, we do not know a lot of things about our database. This little script enables us to know so many details about databases which we may not be familiar with. Run this on your server today and see how much you know your database. Reducing CXPACKET Wait Stats for High Transactional Database While engaging in a performance tuning consultation for a client, a situation occurred where they were facing a lot of CXPACKET Waits Stats. The client asked me if I could help them reduce this huge number of wait stats. I usually receive this kind of request from other client as well, but the important thing to understand is whether this question has any merits or benefits, or not. I discusses the same in this article – a bit long but insightful for sure. Error related to Database in Use There are so many database management operations in SQL Server which requires exclusive access to the database and it is not always possible to get it. When any database is online in SQL Server it either applications or system thread often accesses them. This means database can’t have exclusive access and the operations which required this access throws an error. There is very easy method to overcome this minor issue – a single line script can give you exclusive access to the database. Difference between DATETIME and DATETIME2 Developers have found the root reason of the problem when dealing with Date Functions – when data time values are converted (implicit or explicit) between different data types, which would lose some precision, so the result cannot match each other as expected. In this blog post I go over very interesting details and difference between DATETIME and DATETIME2 History of SQL Server Database Encryption I recently met Michael Coles and Rodeney Landrum the author of one of the kind book Expert SQL Server 2008 Encryption at SQLPASS in Seattle. During the conversation we ended up how Microsoft is evolving encryption technology. The same discussion lead to talking about history of encryption tools in SQL Server. Michale pointed me to page 18 of his book of encryption. He explicitly gave me permission to re-produce relevant part of history from his book. 2011 Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY Some time an interesting feature and smart audience make a total difference in places. From last two days, I have been writing on SQL Server 2012 feature FIRST_VALUE and LAST_VALUE. I created a puzzle which was very interesting and got many people attempt to resolve it. It was based on following two articles: Introduction to FIRST_VALUE and LAST_VALUE Introduction to FIRST_VALUE and LAST_VALUE with OVER clause I even provided the hint about how one can solve this problem. The best part was many people solved the problem without using hints! Try your luck!  A Real Story of Book Getting ‘Out of Stock’ to A 25% Discount Story Available This is a great problem and everybody would love to have it. We had it and we loved it. Our book got out of stock in 48 hours of releasing and stocks were empty. We faced many issues and learned many valuable lessons. Some we were able to avoid in the future and some we are still facing it as those problems have no solutions. However, since that day – our books never gone out of stock. This inspiring learning story for us and I am confident that you will love to read it as well. Introduction to LEAD and LAG – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical function LEAD() and LAG(). This function accesses data from a subsequent row (for lead) and previous row (for lag) in the same result set without the use of a self-join . It will be very difficult to explain this in words so I will attempt small example to explain you this function. I had a fantastic time writing this blog post and I am very confident when you read it, you will like the same. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42  | Next Page >