Search Results

Search found 2437 results on 98 pages for 'exam 70 547'.

Page 39/98 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• SOHO NETGEAR wireless router disconnects when downloading torrents

  - by Lirik

  I have a NETGEAR WGT624 wireless router at home which dies when there is a heavy torrent load. I open up my torrent client and it downloads for about 5 to 10 minutes and it continues to increase the number of seeds (goes up to 70-80 seeds), but after that the router simply fails and I have to restart it in order to get an internet connection again. When I connect directly via an ethernet cable the router and open up the torrent client, then it seems to be doing fine, but when I go wireless then the router stops working properly (although all the lights are still blinking as normal). Is there any way that I can fix this? New router firmware? Change some router options? Feed it a cookie? Anything?

  Read the article

• Replacing a W2K3 Domain Controller - what do I need to know?

  - by Marko Carter

  I have a network of around 70 machines, currently with two DCs both running Windows Server 2003 (DC0 & DC1). DC0 is a five year old Poweredge 1850 and has recently become increasingly flakey, and in the past fortnight has fallen over twice. I want to replace this machine, but I'm cautious as there is huge scope for this sort of thing to go wrong. The way I imagine doing this is building a new machine then doing a DCPROMO and running three domain controllers for a month or so until I'm happy that everything is working as it should be before retiring the old machine. Particular areas of concern are the replication of roles from the current controllers (GP settings for instance) and the ramifications of switching off the machine that has, up until now, been the 'primary'. If there are compelling reasons to use Server 2008 I'm willing to do so, however I don't know if this would cause problems with my exisiting 2003 machines. Any advice on best practice or previous experiences would be most welcome.

  Read the article

• Flash player, HD videos and games are choppy

  - by Aimad Majdou

  I have a problem with flash player. HD videos from Youtube or Vimeo and flash games do not play smoothly. I'm using Flash player 11, Windows 7 Sp1, and my graphic card is Intel GMA 4500. Device Manager shows me that all drivers are installed on my computer, so i don't have any problems with drivers. When I run Google chrome, Resource Monitor shows me 15% ~ 40 % of CPU Usage and 40% used Physical Memory, but when I watch a video on Youtube or play a Flash game, the Resource Monitor shows 70% - 90% CPU Usage. Also, when I run some HD Video (Frame width : 1920, Frame height : 1080) on my computer, Device Manager shows me 80% ~ 100% of CPU Usage. before I Reinstall Windows 7, HD Videos and flash games were play smoothly I hadn't any problem with them !! I hope all these informations are enough to answer my question.

  Read the article

• Where is all the memory being consumed?

  - by Mark L

  Hello, I have a Dell R300 Ubuntu 9.10 box with 4GB of memory. All I'm running on there is haproxy, nagios and postfix yet there is ~2.7GB of memory being consumed. I've run ps and I can't get the sums to add up. Could anyone shed any light on where all the memory is being used? Cheers, Mark $ sudo free -m total used free shared buffers cached Mem: 3957 2746 1211 0 169 2320 -/+ buffers/cache: 256 3701 Swap: 6212 0 6212 Sorry for pasting all of ps' output but I'm keen to get to the bottom of this. $ sudo ps aux [sudo] password for mark: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 19320 1656 ? Ss May20 0:05 /sbin/init root 2 0.0 0.0 0 0 ? S< May20 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< May20 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S< May20 0:16 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S< May20 0:03 [migration/1] root 7 0.0 0.0 0 0 ? S< May20 3:10 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S< May20 0:00 [migration/2] root 10 0.0 0.0 0 0 ? S< May20 0:19 [ksoftirqd/2] root 11 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/2] root 12 0.0 0.0 0 0 ? S< May20 0:01 [migration/3] root 13 0.0 0.0 0 0 ? S< May20 0:41 [ksoftirqd/3] root 14 0.0 0.0 0 0 ? S< May20 0:00 [watchdog/3] root 15 0.0 0.0 0 0 ? S< May20 0:03 [events/0] root 16 0.0 0.0 0 0 ? S< May20 0:10 [events/1] root 17 0.0 0.0 0 0 ? S< May20 0:08 [events/2] root 18 0.0 0.0 0 0 ? S< May20 0:08 [events/3] root 19 0.0 0.0 0 0 ? S< May20 0:00 [cpuset] root 20 0.0 0.0 0 0 ? S< May20 0:00 [khelper] root 21 0.0 0.0 0 0 ? S< May20 0:00 [netns] root 22 0.0 0.0 0 0 ? S< May20 0:00 [async/mgr] root 23 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/0] root 24 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/1] root 25 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/2] root 26 0.0 0.0 0 0 ? S< May20 0:00 [kintegrityd/3] root 27 0.0 0.0 0 0 ? S< May20 0:00 [kblockd/0] root 28 0.0 0.0 0 0 ? S< May20 0:01 [kblockd/1] root 29 0.0 0.0 0 0 ? S< May20 0:04 [kblockd/2] root 30 0.0 0.0 0 0 ? S< May20 0:02 [kblockd/3] root 31 0.0 0.0 0 0 ? S< May20 0:00 [kacpid] root 32 0.0 0.0 0 0 ? S< May20 0:00 [kacpi_notify] root 33 0.0 0.0 0 0 ? S< May20 0:00 [kacpi_hotplug] root 34 0.0 0.0 0 0 ? S< May20 0:00 [ata/0] root 35 0.0 0.0 0 0 ? S< May20 0:00 [ata/1] root 36 0.0 0.0 0 0 ? S< May20 0:00 [ata/2] root 37 0.0 0.0 0 0 ? S< May20 0:00 [ata/3] root 38 0.0 0.0 0 0 ? S< May20 0:00 [ata_aux] root 39 0.0 0.0 0 0 ? S< May20 0:00 [ksuspend_usbd] root 40 0.0 0.0 0 0 ? S< May20 0:00 [khubd] root 41 0.0 0.0 0 0 ? S< May20 0:00 [kseriod] root 42 0.0 0.0 0 0 ? S< May20 0:00 [kmmcd] root 43 0.0 0.0 0 0 ? S< May20 0:00 [bluetooth] root 44 0.0 0.0 0 0 ? S May20 0:00 [khungtaskd] root 45 0.0 0.0 0 0 ? S May20 0:00 [pdflush] root 46 0.0 0.0 0 0 ? S May20 0:09 [pdflush] root 47 0.0 0.0 0 0 ? S< May20 0:00 [kswapd0] root 48 0.0 0.0 0 0 ? S< May20 0:00 [aio/0] root 49 0.0 0.0 0 0 ? S< May20 0:00 [aio/1] root 50 0.0 0.0 0 0 ? S< May20 0:00 [aio/2] root 51 0.0 0.0 0 0 ? S< May20 0:00 [aio/3] root 52 0.0 0.0 0 0 ? S< May20 0:00 [ecryptfs-kthrea] root 53 0.0 0.0 0 0 ? S< May20 0:00 [crypto/0] root 54 0.0 0.0 0 0 ? S< May20 0:00 [crypto/1] root 55 0.0 0.0 0 0 ? S< May20 0:00 [crypto/2] root 56 0.0 0.0 0 0 ? S< May20 0:00 [crypto/3] root 70 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_0] root 71 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_1] root 74 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_2] root 75 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_3] root 82 0.0 0.0 0 0 ? S< May20 0:00 [kstriped] root 83 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/0] root 84 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/1] root 85 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/2] root 86 0.0 0.0 0 0 ? S< May20 0:00 [kmpathd/3] root 87 0.0 0.0 0 0 ? S< May20 0:00 [kmpath_handlerd] root 88 0.0 0.0 0 0 ? S< May20 0:00 [ksnapd] root 89 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/0] root 90 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/1] root 91 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/2] root 92 0.0 0.0 0 0 ? S< May20 0:00 [kondemand/3] root 93 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/0] root 94 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/1] root 95 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/2] root 96 0.0 0.0 0 0 ? S< May20 0:00 [kconservative/3] root 97 0.0 0.0 0 0 ? S< May20 0:00 [krfcommd] root 315 0.0 0.0 0 0 ? S< May20 0:09 [mpt_poll_0] root 317 0.0 0.0 0 0 ? S< May20 0:00 [mpt/0] root 547 0.0 0.0 0 0 ? S< May20 0:00 [scsi_eh_4] root 587 0.0 0.0 0 0 ? S< May20 0:11 [kjournald2] root 636 0.0 0.0 12748 860 ? S May20 0:00 upstart-udev-bridge --daemon root 657 0.0 0.0 17064 924 ? S<s May20 0:00 udevd --daemon root 666 0.0 0.0 8192 612 ? Ss May20 0:00 dd bs=1 if=/proc/kmsg of=/var/run/rsyslog/kmsg root 774 0.0 0.0 17060 888 ? S< May20 0:00 udevd --daemon root 775 0.0 0.0 17060 888 ? S< May20 0:00 udevd --daemon syslog 825 0.0 0.0 191696 1988 ? Sl May20 0:31 rsyslogd -c4 root 839 0.0 0.0 0 0 ? S< May20 0:00 [edac-poller] root 870 0.0 0.0 0 0 ? S< May20 0:00 [kpsmoused] root 1006 0.0 0.0 5988 604 tty4 Ss+ May20 0:00 /sbin/getty -8 38400 tty4 root 1008 0.0 0.0 5988 604 tty5 Ss+ May20 0:00 /sbin/getty -8 38400 tty5 root 1015 0.0 0.0 5988 604 tty2 Ss+ May20 0:00 /sbin/getty -8 38400 tty2 root 1016 0.0 0.0 5988 608 tty3 Ss+ May20 0:00 /sbin/getty -8 38400 tty3 root 1018 0.0 0.0 5988 604 tty6 Ss+ May20 0:00 /sbin/getty -8 38400 tty6 daemon 1025 0.0 0.0 16512 472 ? Ss May20 0:00 atd root 1026 0.0 0.0 18708 1000 ? Ss May20 0:03 cron root 1052 0.0 0.0 49072 1252 ? Ss May20 0:25 /usr/sbin/sshd root 1084 0.0 0.0 5988 604 tty1 Ss+ May20 0:00 /sbin/getty -8 38400 tty1 root 6320 0.0 0.0 19440 956 ? Ss May21 0:00 /usr/sbin/xinetd -pidfile /var/run/xinetd.pid -stayalive -inetd_compat -inetd_ipv6 nagios 8197 0.0 0.0 27452 1696 ? SNs May21 2:57 /usr/sbin/nagios3 -d /etc/nagios3/nagios.cfg root 10882 0.1 0.0 70280 3104 ? Ss 10:30 0:00 sshd: mark [priv] mark 10934 0.0 0.0 70432 1776 ? S 10:30 0:00 sshd: mark@pts/0 mark 10935 1.4 0.1 21572 4336 pts/0 Ss 10:30 0:00 -bash root 10953 1.0 0.0 15164 1136 pts/0 R+ 10:30 0:00 ps aux haproxy 12738 0.0 0.0 17208 992 ? Ss Jun08 0:49 /usr/sbin/haproxy -f /etc/haproxy/haproxy.cfg root 23953 0.0 0.0 37012 2192 ? Ss Jun04 0:03 /usr/lib/postfix/master postfix 23955 0.0 0.0 39232 2356 ? S Jun04 0:00 qmgr -l -t fifo -u postfix 32603 0.0 0.0 39072 2132 ? S 09:05 0:00 pickup -l -t fifo -u -c Here's meminfo: $ cat /proc/meminfo MemTotal: 4052852 kB MemFree: 1240488 kB Buffers: 173172 kB Cached: 2376420 kB SwapCached: 0 kB Active: 1479288 kB Inactive: 1081876 kB Active(anon): 11792 kB Inactive(anon): 0 kB Active(file): 1467496 kB Inactive(file): 1081876 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 6361700 kB SwapFree: 6361700 kB Dirty: 44 kB Writeback: 0 kB AnonPages: 11568 kB Mapped: 5844 kB Slab: 155032 kB SReclaimable: 145804 kB SUnreclaim: 9228 kB PageTables: 1592 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 8388124 kB Committed_AS: 51732 kB VmallocTotal: 34359738367 kB VmallocUsed: 282604 kB VmallocChunk: 34359453499 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 6784 kB DirectMap2M: 4182016 kB Here's slabinfo: $ cat /proc/slabinfo slabinfo - version: 2.1 # name <active_objs> <num_objs> <objsize> <objperslab> <pagesperslab> : tunables <limit> <batchcount> <sharedfactor> : slabdata <active_slabs> <num_slabs> <sharedavail> ip6_dst_cache 50 50 320 25 2 : tunables 0 0 0 : slabdata 2 2 0 UDPLITEv6 0 0 960 17 4 : tunables 0 0 0 : slabdata 0 0 0 UDPv6 68 68 960 17 4 : tunables 0 0 0 : slabdata 4 4 0 tw_sock_TCPv6 0 0 320 25 2 : tunables 0 0 0 : slabdata 0 0 0 TCPv6 72 72 1792 18 8 : tunables 0 0 0 : slabdata 4 4 0 dm_raid1_read_record 0 0 1064 30 8 : tunables 0 0 0 : slabdata 0 0 0 kcopyd_job 0 0 368 22 2 : tunables 0 0 0 : slabdata 0 0 0 dm_uevent 0 0 2608 12 8 : tunables 0 0 0 : slabdata 0 0 0 dm_rq_target_io 0 0 376 21 2 : tunables 0 0 0 : slabdata 0 0 0 uhci_urb_priv 0 0 56 73 1 : tunables 0 0 0 : slabdata 0 0 0 cfq_queue 0 0 168 24 1 : tunables 0 0 0 : slabdata 0 0 0 mqueue_inode_cache 18 18 896 18 4 : tunables 0 0 0 : slabdata 1 1 0 fuse_request 0 0 632 25 4 : tunables 0 0 0 : slabdata 0 0 0 fuse_inode 0 0 768 21 4 : tunables 0 0 0 : slabdata 0 0 0 ecryptfs_inode_cache 0 0 1024 16 4 : tunables 0 0 0 : slabdata 0 0 0 hugetlbfs_inode_cache 26 26 608 26 4 : tunables 0 0 0 : slabdata 1 1 0 journal_handle 680 680 24 170 1 : tunables 0 0 0 : slabdata 4 4 0 journal_head 144 144 112 36 1 : tunables 0 0 0 : slabdata 4 4 0 revoke_table 256 256 16 256 1 : tunables 0 0 0 : slabdata 1 1 0 revoke_record 512 512 32 128 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_inode_cache 53306 53424 888 18 4 : tunables 0 0 0 : slabdata 2968 2968 0 ext4_free_block_extents 292 292 56 73 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_alloc_context 112 112 144 28 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_prealloc_space 156 156 104 39 1 : tunables 0 0 0 : slabdata 4 4 0 ext4_system_zone 0 0 40 102 1 : tunables 0 0 0 : slabdata 0 0 0 ext2_inode_cache 0 0 776 21 4 : tunables 0 0 0 : slabdata 0 0 0 ext3_inode_cache 0 0 784 20 4 : tunables 0 0 0 : slabdata 0 0 0 ext3_xattr 0 0 88 46 1 : tunables 0 0 0 : slabdata 0 0 0 dquot 0 0 256 16 1 : tunables 0 0 0 : slabdata 0 0 0 shmem_inode_cache 606 620 800 20 4 : tunables 0 0 0 : slabdata 31 31 0 pid_namespace 0 0 2112 15 8 : tunables 0 0 0 : slabdata 0 0 0 UDP-Lite 0 0 832 19 4 : tunables 0 0 0 : slabdata 0 0 0 RAW 183 210 768 21 4 : tunables 0 0 0 : slabdata 10 10 0 UDP 76 76 832 19 4 : tunables 0 0 0 : slabdata 4 4 0 tw_sock_TCP 80 80 256 16 1 : tunables 0 0 0 : slabdata 5 5 0 TCP 81 114 1664 19 8 : tunables 0 0 0 : slabdata 6 6 0 blkdev_integrity 144 144 112 36 1 : tunables 0 0 0 : slabdata 4 4 0 blkdev_queue 64 64 2024 16 8 : tunables 0 0 0 : slabdata 4 4 0 blkdev_requests 120 120 336 24 2 : tunables 0 0 0 : slabdata 5 5 0 fsnotify_event 156 156 104 39 1 : tunables 0 0 0 : slabdata 4 4 0 bip-256 7 7 4224 7 8 : tunables 0 0 0 : slabdata 1 1 0 bip-128 0 0 2176 15 8 : tunables 0 0 0 : slabdata 0 0 0 bip-64 0 0 1152 28 8 : tunables 0 0 0 : slabdata 0 0 0 bip-16 84 84 384 21 2 : tunables 0 0 0 : slabdata 4 4 0 sock_inode_cache 224 276 704 23 4 : tunables 0 0 0 : slabdata 12 12 0 file_lock_cache 88 88 184 22 1 : tunables 0 0 0 : slabdata 4 4 0 net_namespace 0 0 1920 17 8 : tunables 0 0 0 : slabdata 0 0 0 Acpi-ParseExt 640 672 72 56 1 : tunables 0 0 0 : slabdata 12 12 0 taskstats 48 48 328 24 2 : tunables 0 0 0 : slabdata 2 2 0 proc_inode_cache 1613 1750 640 25 4 : tunables 0 0 0 : slabdata 70 70 0 sigqueue 100 100 160 25 1 : tunables 0 0 0 : slabdata 4 4 0 radix_tree_node 22443 22475 560 29 4 : tunables 0 0 0 : slabdata 775 775 0 bdev_cache 72 72 896 18 4 : tunables 0 0 0 : slabdata 4 4 0 sysfs_dir_cache 9866 9894 80 51 1 : tunables 0 0 0 : slabdata 194 194 0 inode_cache 2268 2268 592 27 4 : tunables 0 0 0 : slabdata 84 84 0 dentry 285907 286062 192 21 1 : tunables 0 0 0 : slabdata 13622 13622 0 buffer_head 256447 257472 112 36 1 : tunables 0 0 0 : slabdata 7152 7152 0 vm_area_struct 1469 1541 176 23 1 : tunables 0 0 0 : slabdata 67 67 0 mm_struct 82 95 832 19 4 : tunables 0 0 0 : slabdata 5 5 0 files_cache 104 161 704 23 4 : tunables 0 0 0 : slabdata 7 7 0 signal_cache 163 187 960 17 4 : tunables 0 0 0 : slabdata 11 11 0 sighand_cache 145 165 2112 15 8 : tunables 0 0 0 : slabdata 11 11 0 task_xstate 118 140 576 28 4 : tunables 0 0 0 : slabdata 5 5 0 task_struct 128 165 5808 5 8 : tunables 0 0 0 : slabdata 33 33 0 anon_vma 731 896 32 128 1 : tunables 0 0 0 : slabdata 7 7 0 shared_policy_node 85 85 48 85 1 : tunables 0 0 0 : slabdata 1 1 0 numa_policy 170 170 24 170 1 : tunables 0 0 0 : slabdata 1 1 0 idr_layer_cache 240 240 544 30 4 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-8192 27 32 8192 4 8 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-4096 291 344 4096 8 8 : tunables 0 0 0 : slabdata 43 43 0 kmalloc-2048 225 240 2048 16 8 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-1024 366 432 1024 16 4 : tunables 0 0 0 : slabdata 27 27 0 kmalloc-512 536 544 512 16 2 : tunables 0 0 0 : slabdata 34 34 0 kmalloc-256 406 528 256 16 1 : tunables 0 0 0 : slabdata 33 33 0 kmalloc-128 503 576 128 32 1 : tunables 0 0 0 : slabdata 18 18 0 kmalloc-64 3467 3712 64 64 1 : tunables 0 0 0 : slabdata 58 58 0 kmalloc-32 1520 1920 32 128 1 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-16 3547 3840 16 256 1 : tunables 0 0 0 : slabdata 15 15 0 kmalloc-8 4607 4608 8 512 1 : tunables 0 0 0 : slabdata 9 9 0 kmalloc-192 4620 5313 192 21 1 : tunables 0 0 0 : slabdata 253 253 0 kmalloc-96 1780 1848 96 42 1 : tunables 0 0 0 : slabdata 44 44 0 kmem_cache_node 0 0 64 64 1 : tunables 0 0 0 : slabdata 0 0 0

  Read the article

• Losing windows XP files. How to retrieve them?

  - by ravi

  I have a portable 500 GB HDD.Since last few days, all files of some folder are getting kinda corrupted.I can't access/delete them. Here is the example. If I try to access these files/folders, I get following error. This thing is kinda spreading in my HDD.Till now it has affected two folders worth 70 GB.In which one folder is backup folder where all my important data resides.So I am really in loss if I loose this data. How can I retrieve this data? Please help.

  Read the article

• aligning truecrypt partition on 1.5TB 4kB sector drive

  - by pQd

  hi, aligning partitions to start at real physical sector of ssds / stripped raids / 4kB drives is a 'good thing to do'. but i've run into a problems when trying to do it for a truecrypt partition that will contain ext3 on it. or so it seems. when drive is question is partitioned properly and formatted with ext3 i get very reasonable write speeds around 70-80MB/s, but when i put truecrypt and ext3 on the top of it write performance becomes very unstable and goes between 1-25MB/s with very high io-wait. on the same server i dont have any performance issues with ext3 on the top of truecrypt on regular 512B-sector 500GB sata disks. so my best guess is that iowaits are caused by misalignment but i cannot really find reliable information on how to calculate optimal partition beginning. i've tried to start it at 128 logical sector, i've also tried 8132 sector as suggested here but both gave me very bad and unstable performance. do you have any experience with similar setup? thanks!

  Read the article

• How can I set the fan speed to 100% on a laptop?

  - by Codemonkey

  I recently purchased a HP Pavilion dv7-4031. When it's cool, it works smoothly and efficiently. However when CPU and GUP temperatures reach 60c and above, the PC starts freezing up and stuttering. I can hear that the fan speeds steadily increase all the way up to 70-80c. This is what pisses me off: I want the fan speeds to run 100% all the time, perhaps preventing the high temperatures in the first place. The way it is now, fan speeds only increase to keep internal temperatures at above 60c. I've searched all over for any sort of speed control, finding nothing. Any help appreciated. I have tried Speedfan. In "Fans" there is nothing listed. I took that as a bad sign. The BIOS is pathetic, and only has 4 or 5 changeable settings, including "Quickstart" and "Boot order"

  Read the article

• High Load - Low IO - Low CPU usage

  - by devup

  I have a system whose load is rather high. As you can see from the top output below, CPU usage and I/O is negligible: top - 17:31:59 up 4 days, 2:34, 2 users, load average: 1.00, 0.99, 1.00 Tasks: 71 total, 1 running, 70 sleeping, 0 stopped, 0 zombie Cpu(s): 2.0%us, 2.0%sy, 0.0%ni, 95.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 960720k total, 707288k used, 253432k free, 67328k buffers Swap: 2811896k total, 2644k used, 2809252k free, 528928k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15310 root 20 0 2512 1128 888 R 2.1 0.1 0:00.05 top I would appreciate any assistance with isolating the cause(s) of high load for when I/O and CPU are not factors.

  Read the article

• Route traffic on vpn to another interface on an ASA 5510

  - by Dave

  I have a ASA 5510 that has about 60-70 vpn tunnels. I have four interfaces on the device: 1)External, 2)192.168.1.0, 3)192.168.2.0, 4) 192.168.3.0 A VPN tunnel is configured from the remote site (192.168.200.0) to the 192.168.2.0 subnet on the ASA. I have remote applications I would like the users at the remote site to be able to access which are hosted on the 192.168.3.0 subnet. I can route traffic between the subnets that are located on the ASA. Any way I can route traffic from the remote site to the 192.168.3.0?

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• Why does 1GBit card have output limited to 80 MiB ?

  - by Gallus

  I'm trying to utilize maximal bandwidth provided by my 1GiB network card, but it's always limited to 80MiB (real megabytes). What can be the reason? Card description (lshw output): description: Ethernet interface product: DGE-530T Gigabit Ethernet Adapter (rev 11) vendor: D-Link System Inc physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 11 serial: 00:22:b0:68:70:41 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation The card is placed in following PCI slot: *-pci:2 description: PCI bridge product: 82801 PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 92 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list The PCI isn't any PCI Express right? It's a legacy PCI slot? So maybe this is the reason? OS is a linux.

  Read the article

• Need to hookup HP dv7-3085dx with Nvidia GeForce GT 230M to my Dell 30 inch LCD 3007WFP at max resol

  - by user14660

  I recently bought an HP laptop (dv7-3085dx) (http://reviews.cnet.com/laptops/hp-pavilion-dv7-3085dx/4505-3121_7-33776108.html) which is supposed to have a pretty good video card (NVIDIA GeForce GT 230M). The card is supposed to output a max resolution of 2560x1600 which is also the max resolution of my monitor (http://www.ubergizmo.com/15/archives/2006/02/dell_3007wfp_on_dell_2001fp_action_8_megapixel_desktop.html). Now I bought an HDMI to dual link dvi (http://www.amazon.com/gp/product/B002KKLYDK/ref=oss_product) cable...this is after Best Buy's 70 dollar hdmi to dvi (perhaps it was 'single' link?) didn't give me the best resolution. In windows 7, when I try to set the max resolution for my 30 in monitor, I only get 1280x800...which is absurd. The monitor is great, I love the laptop and the video card supposedly supports such resolutions. So I can't figure out why I'm not getting better resolution (by the way, when i "detect" my monitor in windows 7, it is shown correctly as DELL 3007WFP!).

  Read the article

• How to close the logon process named NtLmSsp ?

  - by Aristos

  I have a windows 2003 server and time to time I am getting many login failures like this one. Logon Failure: Reason: Unknown user name or bad password User Name: administrator Domain: xx.xx.xx.xx Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: XLHOST Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 173.45.70.100 <- hacker Source Port: 4722 AND Logon attempt by: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Logon account: user Source Workstation: XLHOST Error Code: 0xC0000064 The question is, how can I close this process of login ?, what I have left open and some one can try to login ? Some notes: I login to the server using tunneling, nothing is open except dns, email, and web ports, not even ftp, and all default ports are change and hidden. I also monitor port scan and capture any one that try to find the hidden ports. Probably it is something open... Thank you in advanced.

  Read the article

• What is the most relevant statistic information from Google Analytics for website optimalisation? [c

  - by Paulo

  I was wondering, what is considered the best statistic information from Google Analytics for website optimalisation? Example 1: Alot of visitors leave the website on a specific page, this could be because there aren't enough forwards / links on that page so that the visitors don't see a reason to continue their travel on the website. Example 2: Your traffic sources are 70% direct visits, 28% redirects from other websites and 2% by search engine. You could say that your website is not easily findable in search engines which could be interpreted as a sign that your keywords and/or meta description aren't good enough to be found. I'd like to hear some from other people!

  Read the article

• MySQL Windows vs. Linux: performance, caveats, pros and cons?

  - by gravyface

  Looking for (preferrably) some hard data or at least some experienced anecdotal responses with regards to hosting a MySQL database (roughly 5k transactions a day, 60-70% more reads than writes, < 100k of data per transaction i.e. no large binary objects like images, etc.) on Windows 2003/2008 vs. a Debian-based derivative (Ubuntu/Debian, etc.). This server will function only as a database server with a separate Web server on another physical box; this server will require remote access for management (SSH for Linux, RDP for Windows). I suspect that the Linux kernel/OS will compete less than the Windows Server for resources, but for this I can't be certain. There's also security footprint: even with Windows 2008, I'm thinking that the Linux box can be locked down more easily than the Windows Server. Anyone have any experience with both configurations?

  Read the article

• Limit of dvd rom

  - by user23950

  I have lite on dvd rom. And I'm going to copy lots of files from maybe 40-70 dvd's. And I'm using this dvd rom for about 4-7 months now. And I have also burned lots of dvd's. and I've copied the 2nd dvd. But the rom is making sound. A sound that I do not hear frequently. Does it depend on the dvd's that I'm reading or my dvd rom is getting old. How many dvd's do you think the rom can copy without threatening its health

  Read the article

• Graphic driver for Targa Now NT9231

  - by Lumio

  I thought of installing Xubuntu on my elder Targa Now nettop and didn't think about the driver option. So now I'm here with a fresh Xubuntu installation and looking for graphic drivers. I found someone who might have had a "good" result with SiS - and the package is already installed, but I can't get my xorg.conf right. This is how my xorg.conf looks like right now: Section "Device" Identifier "Configured Video Device" Driver "sis" EndSection Section "Monitor" Identifier "Screen 0" Modeline "1024x768_60.00" 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync #HorizSync 30.0-62.0 #VertRefresh 50.0-70.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1024x768" "800x600" EndSubSection EndSection Thanks for every help given!

  Read the article

• Second display freaks out when waking from sleep

  - by inkedmn

  I have two laptops, an older white MacBook and a brand new Macbook Pro. When either computer is on my desk, I connect it to a second, widescreen display (Acer, a couple years old, uses DVI). The Macbook connects via mini DVI and the MBP connects via mini displayport. When the Macbook is connected and everything goes to sleep, I'm able to wake the machine and both displays in the normal way and everything is fine. Sometimes, when waking the MBP, the laptop and primary display are fine, but the second display shows a bunch of static. If I restart the display, everything's fine. This probably happens 70% of the time when the MBP goes to sleep while connected to this display. Any idea what could be causing this?

  Read the article

• Isopropyl okay to use on MacBook screen?

  - by Archagon

  I've always used a mixture of isopropyl alcohol and distilled water to clean my computer screens (50% water and 50% * 70% isopropyl). From what I understand, these are exactly the same ingredients used in most commercial screen cleaners, perhaps even more diluted. I recently used this solution to wipe off my 2010 MacBook Pro screen, and there don't seem to be any problems, but this support page explicitly says not to use isopropyl. Now I'm worried that I might have inadvertently damaged something. I'm also concerned because I once managed to dissolve the surface rubber lining of one of my mice with the isopropyl solution, and the MacBook Pro display has a thin rubber bezel keeping the glass in place. Why would Apple single out isopropyl on their support page? Should I be concerned?

  Read the article

• What settings to use for fastest reloading of a MySQL backup?

  - by Alex R

  I have a MySQL database which dumps to a 3.5 GB backup (mysqldump) in about 10 minutes. But reloading this backup on a standby / test server takes upwards of 12 hours. What are some settings that would maximize reloading performance? The most promising appear to be innodb_buffer_pool_size, innodb_additional_mem_pool_size, and innodb_log_buffer_size... but I'm reaching the limits of my trial-and-error approach. Which of these settings "should" be the most important? Through trial-and-error I was not able to get more than 70% CPU utilization and 63% memory utilization. I'd like both at 100% during a reload. All tables are InnoDB.

  Read the article

• PHP/mail : server sends email originating from wrong domain

  - by Niro

  I have a Mediatemple dv (Plesk) server with two domains, each has static IP. I had domain1 as main domain and domain2 as secondary. When A PHP script from domain2 sends email the headers show the IP address of domain1 as the origin. Received: from domain2.com (domain1.com [70.ipof domain1]). I want only domain2 to be mentioned so I did the following: Changed server name to domain2.com made domain2.com the primary domain (about 30 hours ago) made fixed IP address of domain2.com the default address for the server. Still when the script sends emails I see the same info as above in the header. What do I need to do to make the email origin domain2.com?

  Read the article

• RAID 1 not performing as expected

  - by Faken

  I recently bought a new 320Gb hard drive for my computer to set up RAID 1 on it for some added security. Installation went as smooth as could possibly be (plug in power, plug in data cable, start up computer, Intel software recognized new drive, right click create RAID 1, done!). However, for some inexplicable reason, I seem to have strange test results when using BENCH32. On my old configuration, a single 7200 rpm drive, I achieved about 60 MB/s write and 70 MB/s read. With a new RAID 1 configuration, I would expect the write to be slightly diminished but read to be significantly improved (though not exactly double speed). However, with the new configuration, I am getting 90 MB/s write and only about 80 MB/s read. I should NOT be getting improved write performance, especially NOT better than read! What's going on? My system setup is: q6600 2.4ghz CPU 4Gb DDR2 667mhz RAM on board Intel ICH9R "RAID chip" 2x Seagate 7200 RPM 320GB drives in RAID 1 Widows 7 home premium 64-bit

  Read the article

• Monitoring server room temperature

  - by user640

  I have a small server room with its own AC unit. Recently, the AC died, and the temperature increased from 70 F to 90 F. We rarely go in this room, so I was lucky that someone happened to notice that the fans were running a lot louder than normal as they walked past the door. It looks like I need a way to be notified when the temperature in that room gets too hot. What tools are you using to monitor the temperature in your server room? How does this tool notify you of a problem (email, SNMP, etc). Note: I've read this question on server temperature, but I'm interested in the whole room, not just the inside of a server case. Edit: Thanks for all the great responses so far! Many of these products measure much more than just temperature. What else should I be looking at and why?

  Read the article

• how to change interface ip in ifconfig with /etc/network/interfaces

  - by user2478348

  Hi everybody when modifiying /etc/network/interfaces, saving it and then executing ifconfig i can't see the modification i made..for example here is part of my /etc/network/interfaces: auto wlan1 iface wlan1 inet static address 192.168.0.60 netmask 255.255.255.0 gateway 192.168.0.61 you can see that the IP address of my wlan1 is 192.168.0.60 but when typing ifconfig i have this: wlan1 Link encap:Ethernet HWaddr 00:19:70:0f:c2:9c inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::219:70ff:fe0f:c29c/64 Scope:Lien UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Packets reçus:758 erreurs:0 :0 overruns:0 frame:0 TX packets:610 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 Octets reçus:73490 (73.4 KB) Octets transmis:127883 (127.8 KB) (the inet adr:192.168.0.1 and not 198.168.0.60)..if someone can help me I'll be very thankful :)

  Read the article

• How can I open a console application with a given window size?

  - by Oliver Salzburg

  The application I want to start is MongoDB. If I would start it normally, it looks like this: I don't like the amount of line breaks and I have a lot of screen space, so I would like to utilize said space to get rid of the line breaks. I can change the size of the console window with MODE, so I wrote a batch file like this: @ECHO OFF MODE con:cols=140 lines=70 %~dp0mongodb\bin\mongod --dbpath %~dp0data --rest So far, so good. When I start this batch file, I get a larger window, as desired. But when I now press Ctrl+C to exit MongoDB, I get the annoying prompt: Terminate batch job (Y/N)? Which is useless, because the command I just exited out of was the last command in the batch job anyway and no matter what I answer, the result is the same. So, how can I get a larger console window for the application without having that prompt when I hit Ctrl+C?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >