Search Results

Search found 1379 results on 56 pages for 'forwarding'.

Page 39/56 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• How to configure a static wildcard subdomain with dnsmasq.

  - by Prody

  I have a network behind a NAT with a few machines. The machines are: router - NAT, dnsmasq, forwarding - directly connected to the inet server - which runs ssh, www and some other stuff clients - which do stuff on server I also have mydomain.com. server.mydomain.com is pointing to my connection's IP (single IP), which is the router, which forwards ports to server. Server, has a httpd running, which serves different sites based on vhosts. So I have site1.server.mydomain.com, site2.. The problem is that all the traffic is going thru the router, and when I check logs I always see the router's IP for everything (so it's hard to see who is running the script with the while(1)). I would just ServerAlias site1.server.local, but most of the sites have a root URL saved somewhere on top of which other URLs are built, so I can't do that. The solution for me would be telling dnsmasq somehow to answer to *.mydomain.com with server's IP. Is this possible somehow?

  Read the article

• Determine $DISPLAY socket name on OS X 10.6?

  - by Nate

  I'm looking to do something that's a little odd. I'm SSH'ing from a server to a Snow Leopard client to start an X11 data display process. In other words, SSH's X11 forwarding isn't what I want. I can do: client$ echo $DISPLAY /tmp/launch-SOMETHING/org.x:0 client$ ls -l $DISPLAY srwx------ 1 myuser wheel 0 Dec 9 15:47 /tmp/launch-SOMETHING/org.x:0 And, when I do: server$ ssh myuser@client client$ export DISPLAY=/tmp/launch-SOMETHING/org.x:0 client$ xterm I happily get my xterm. What I need, then, is some way to find out the correct value for $DISPLAY in my ssh session. From what I've read, $DISPLAY is set by launchd, but I haven't found any way to see that value. If it matters, I know that when my process connects from $server to $client, $client will logged in to the terminal as the same user.

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• Hooking domain to home server with port

  - by user1071461

  Alright, I'm asking two things here. First of all, if i purchase a domain let's say myhomeserver.com, am I able to make the default port go through a different port instead of the default port 80? (that is without having to do myhomeserver.com:5000 for example). Also this should be without blocking other ports (so no stealth forwarding to myhomeserver.com:5000 i think) Secondly, How could I go about hooking a domain to a windows 2008 server? I've seen it on linux but no clue how to do it on windows if it's even possible. I know I'm asking a lot here, just some tips are appereciated. Also, yes I know, using a home server is horrible for security and preformance and whatnot, I understand this already, thanks ^^

  Read the article

• Routing between two networks on linux?

  - by gGololicic

  I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

  Read the article

• mod_proxy failing as forward proxy in simple configuration

  - by Stabledog

  (On Mac OS X 10.6, Apache 2.2.11) Following the oft-repeated googled advice, I've set up mod_proxy on my Mac to act as a forward proxy for http requests. My httpd.conf contains this: <IfModule mod_proxy> ProxyRequests On ProxyVia On <Proxy *> Allow from all </Proxy> (Yes, I realize that's not ideal, but I'm behind a firewall trying to figure out why the thing doesn't work at all) So, when I point my browser's proxy settings to the local server (ip_address:80), here's what happens: I browse to http://www.cnn.com I see via sniffer that this is sent to Apache on the Mac Apache responds with its default home page ("It works!" is all this page says) So... Apache is not doing as expected -- it is not forwarding my browser's request out onto the Internet to cnn. Nothing in the logfile indicates an error or problem, and Apache returns a 200 header to the browser. Clearly there is some very basic configuration step I'm not understanding... but what?

  Read the article

• outlook iptables configuration

  - by mediaexpert

  I've a Debian mail server, but only the outlook users can't be able to download the emails. I've seen a lot of post about some kind of forwarding port configuration, I've tried some commands, but I don't be able to solve this problem, please help me. below INPUT and FORWARD iptables: Chain INPUT (policy DROP 20 packets, 1016 bytes) pkts bytes target prot opt in out source destination 60833 16M ACCEPT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 state NEW,ESTABLISHED 18970 971K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spts:1024:65535 dpt:110 state NEW,ESTABLISHED Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT tcp -- * * 192.168.0.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 192.168.1.0/24 0.0.0.0/0 tcp dpt:110 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110

  Read the article

• Connect macbook to my LAN through a VPN - best solution? [closed]

  - by LewisMc

  So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

  Read the article

• howt setup remote access into computer behind 2 routers?

  - by Steve Wasiura

  I can setup remote access to a pc behind a single router/firewall by using NAT and Port Forwarding, simples! But there is a customer that shares an internet connection with another office, and they are behind a second router firewall. I drawed a picture with my crayons but I can't attach it because I'm a new account on SF. see it here: http://i.imgur.com/b3FDx.png So how would I setup remote access to the pc that is beind the second firewall? It must be something about static routes, i.e. if I hit the wan ip on port 4905 I want it to forward it to 10.0.0.30 by going through 192.168.1.10 so a route statement like for all requests to 10.0.0.30, use 192.168.1.10 ? and ass u me router 2 has a static gateway ip of 192.168.1.10 and need a standard NAT on router 2 to point port 4905 to 10.0.0.30 is this the right way, any tips? both routers are netgear consumer equipment. thanks

  Read the article

• How can I view my video card's temperature via SSH?

  - by NT3RP

  I've finally managed to set up my two ATI Radeon 6950 video cards in my machine, but the cards can get quite hot. Based on the arrangement of my apartment, I want to be able to SSH into the machine an execute a command to find out the temperature. What I have tried so far is this... export DISPLAY=:0.0 sudo aticonfig --adapter=0 --od-gettemperature However, when I do that via SSH, I get the following error: ERROR - X needs to be running to perform ATI Overdrive(TM) commands If I turn on X forwarding when I remote into the machine, then it just seems to affect my local machine instead of the remote machine. Am I doing this correctly? Is there a better way to monitor my video card's temperature?

  Read the article

• Is there any way to remotely configure a Microsoft Lync account?

  - by John O

  There are no perl modules for Lync. No open source clients. Windows Powershell can do some things with it, but only on the server on which the server software is installed. It would be useful to be able to forward a certain desk phone number (we use Lync for voip) to a personal cell phone. We can do this from our own desktop machines, but only using the Lync client. It would be nice to be able to have a cron script run that just did rotations, I wouldn't have to carry around the lousy on-call phone with me. communicator.exe doesn't take any useful parameters. Nor are there any obvious function names in the DLLs that would let me just use rundll32.exe to accomplish this. There is a Lync SDK, but no examples of changing phone forwarding, and my Windows 7 machine refuses to install the Silverlight SDK dependency for some reason I can't fathom. Does anyone have any other ideas how I might accomplish this?

  Read the article

• Get OpenVPN clients names to resolve through dnsmasq

  - by Fake Name

  I have a PFSense box running as an OpenVPN server. There are several remote devices that connect through the VPN (as tap devices). The VPN stuff is working, I can access the remote hardware by looking up the IP assigned to each device on the PFSense router. What I'd like is to have it so I can resolve the remote hardware addresses via DNS while on the local network. Note that this is only local-network - remote-device (they're backup boxes). I don't need to have the remote devices resolve using the local DNS forwarding agent. I have the rest of the devices on the network that need to be accessible via DNS report their name during the DHCP process. However, the IP assignment for OpenVPN tap clients, while it is dynamic (which is why I need DNS), does not seem to use the local DHCP server. How can I have my openvpn server add information for it's clients to the dnsmask resolver? Is this setup even reasonable (I'm not familiar with openVPN at all)?

  Read the article

• Redirecting HTTP traffic from a local server on the web

  - by MrJackV

  Here is the situation: I have a webserver (let's call it C1) that is running an apache/php server and it is port forwarded so that I can access it anywhere. However there is another computer within the webserver LAN that has a apache server too (let's call it C2). I cannot change the port forwarding nor I can change the apache server (a.k.a. install custom modules). My question is: is there a way to access C2 within a directory of C1? (e.g. going to www.website.org/random_dir will allow me to browse the root of C2 apache server.) I am trying to change as little as possible of the config/other (e.g. activating modules etc.) Is there a possible solution? Thanks in advance.

  Read the article

• Directing multiple domains to one server

  - by dtechie

  Hi I would like to host 5 word-press blogs on my unlimited server space i bought from a web-hosting company similar to hostgator. Now the companies say it is technically not possible to direct more than one domain to the hosting package and i would need to buy multiple hosting packages . I read about vhost (apache),domain alias,ip forwarding But not sure how ask my webhost about it when they say it is not possible here is what i want to do xhost.com/folder1 << www.x.com xhost.com/folder2 << www.y.com xhost.com/folder3 << www.z.com xhost.com/folder4 << www.aa.com the web host has a cpanel so dont know if they give/have access to vhosts if they are a reseller thank you for your help

  Read the article

• "Meet in the middle" with SSH

  - by stillinbeta

  I have an interesting question regarding SSH. I have a machine at school that I'd like to be able to access from elsewhere. It's behind a firewall/NAT, so I can't get at it directly. I have a leased web server that I can SSH into from anywhere. I was wondering if I could do some voodoo with port forwarding to get to my machine at school via the web server. I think this comes down to whether you can do SSH "backwards," which may or may not be possible. Basically: Machine A can access Machine B Machine C can also access Machine B How can Machine A access Machine C?

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Mirror network packets from WiFi to Ethernet in an ASUS Router RT N53

  - by fazineroso

  I have an ASUS RT N53 router, running the default firmware (Linux 2.6.22 with busybox and uclibc). I need to capture data packets from some Wi-Fi devices I have connected to that router (iPad and some smartphones), but the router is not forwarding any package coming from Wi-Fi devices to the Ethernet Ports. Any idea how can I proceed? Available tools in the router are iptables (no tee option, though), ebtables, brctl... Currently the ethernet and Wifi devices are forming a bridge: # brctl show bridge name bridge id STP enabled interfaces br0 8000.50465dc06be2 no vlan0 eth1 No ebtables rules: # ebtables -L Bridge table: filter Bridge chain: INPUT, entries: 0, policy: ACCEPT Bridge chain: FORWARD, entries: 0, policy: ACCEPT Bridge chain: OUTPUT, entries: 0, policy: ACCEPT

  Read the article

• Forced to use Outlook Web Access, what are my options?

  - by joon

  My company just enforced an OWA update and disabled IMAP and POP3 access. I don't want to use the webmail, do I have any options? Forwarding is also disabled. I also don't look forward to installing thunderbird or anything else, which is what colleagues are doing. I'd be interested in running some sort of automation script that either forwards the emails, or notifies me somehow that there has been some activity. Disclaimer: This does not concern any illegal activity, as I work at a school. They are not explicitly preventing me from circumventing their bogus security imposition and have given me permission to do so, 'if I can find a way'. Which of course makes me want to do it even more.

  Read the article

• Is there a way to get Postfix to both forward an e-mail *and* reject it via recipient_address_rejected

  - by Mac

  In postfix, I'd like a way to deal with e-mail accounts that are no longer active by having postfix send the standard "Recipient address rejected" type message, but still forwarding the e-mail to another user. Thus, if someone sends an e-mail to [email protected], it will bounce the message back to the sender for future reference, but the mail will still get forwarded to [email protected] to deal with. .vacation and / or .forward files let me down because they will either reply or forward, but not both. Any tips?

  Read the article

• RDC not working from outside

  - by Cotten

  I've set up Remote Connection according to : http://windows.microsoft.com/is-IS/windows7/allow-remote-desktop-connections-from-outside-your-home-network That is, Allow remote connections to the computer you want to access. Make sure Remote Desktop is able to communicate through your firewall. Find the IP address of the computer on your home network that you want to connect to. Open your router's configuration screen and forward TCP port 3389 to the destination computer's IP address. Find your router's public IP address so that Remote Desktop can find it on the Internet. When I'm inside the LAN, RDC works flawlessly. When I try to connect to the ip given by my ISP it cannot connect. I've setup port forwarding for 3389 on my netgear router. Thanks!

  Read the article

• rsync not using forwarded ssh credentials

  - by Mat

  I have a situation where I would like to rsync some files from a remote server to a server in my office. The source server requires key-based authentication and I have an appropriate key set up on my desktop machine. If I ssh into the local server and then ssh to the remote server, ssh agent forwarding works correctly. However, when I try to rsync over ssh I get permission denied. So, Desktop -- Local server -- Remote server. When ssh'd onto the local server ssh user@remote works, but rsync -avPe ssh user@remote:/src /dest does not - Permission denied (publickey).

  Read the article

• How can I ensure an ex-administrator of Exchange doesn't still have email access somewhere?

  - by Tony T

  I work for a company in which an ex-employee had administrative access to Microsoft Exchange 2007, and I understand that at some points this person had email which was sent to other employees also forwarded on to him. Upon taking over the administration of the server, of course all of his known accounts were closed, and any of those forwarding rules were removed. However, I would like to ensure that we didn't miss anything. What would be the best way to ensure that: (1) There isn't still some sort-of email being forwarded on to him somewhere? (2) That he doesn't have some sort-of other access to an inbox or another employee's email? I am less concerned about access to the box itself as I am that there is an existing email rule somewhere that is still getting run, or that there is a distribution list that we missed, etc.

  Read the article

• External drives show up in Nautilus/Computer even when they are unplugged.

  - by Testament

  I have two 1TB Seagate USB (sdc1 and sdd1) drives connected to an old PC running Fedora 11 without an X server running. Since sdc1 and sdd1 change depending on the order in which they are plugged in, I decided to mount them using their UUID instead. These are my fstab entries UUID=d1b28578-451b-4f03-af28-2e8a6d5b7efb /media/Seagate ext3 defaults,rw,auto,users UUID=36bf5df4-934e-42d4-9e25-16a13971509c /media/Projects ext3 defaults,rw,auto,users They work fine, but when I unmount them and unplug the USB drives, they still show up in Nautilus (I'm running nautilus with X11 forwarding to an Ubuntu machine, btw). Now if I remove those entries from fstab, the drives disappear from Computer. If I add the entries back, they show up as an unmounted drive even when the drive is not plugged in. How do I do this so they don't show up when they're not plugged in?

  Read the article

• External drives show up in Nautilus/Computer even when they are unplugged.

  - by Testament

  I have two 1TB Seagate USB (sdc1 and sdd1) drives connected to an old PC without an X server running. Since sdc1 and sdd1 change depending on the order in which they are plugged in, I decided to mount them using their UUID instead. These are my fstab entries UUID=d1b28578-451b-4f03-af28-2e8a6d5b7efb /media/Seagate ext3 defaults,rw,auto,users UUID=36bf5df4-934e-42d4-9e25-16a13971509c /media/Projects ext3 defaults,rw,auto,users They work fine, but when I unmount them and unplug the USB drives, they still show up in Nautilus (I'm running nautilus with X11 forwarding onto another Ubuntu machine, btw). Now if I remove those entries from fstab, the drives disappear from Computer. If I add the entries back, they show up as an unmounted drive even when the drive is not plugged in. How do I do this so they don't show up when they're not plugged in?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >