Search Results

Search found 1729 results on 70 pages for 'identifier'.

Page 39/70 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • Is browser and bot whitelisting a practical approach?

    - by Sn3akyP3t3
    With blacklisting it takes plenty of time to monitor events to uncover undesirable behavior and then taking corrective action. I would like to avoid that daily drudgery if possible. I'm thinking whitelisting would be the answer, but I'm unsure if that is a wise approach due to the nature of deny all, allow only a few. Eventually someone out there will be blocked unintentionally is my fear. Even so, whitelisting would also block plenty of undesired traffic to pay per use items such as the Google Custom Search API as well as preserve bandwidth and my sanity. I'm not running Apache, but the idea would be the same I'm assuming. I would essentially be depending on the User Agent identifier to determine who is allowed to visit. I've tried to take into account for accessibility because some web browsers are more geared for those with disabilities although I'm not aware of any specific ones at the moment. The need to not depend on whitelisting alone to keep the site away from harm is fully understood. Other means to protect the site still need to be in place. I intend to have a honeypot, checkbox CAPTCHA, use of OWASP ESAPI, and blacklisting previous known bad IP addresses.

    Read the article

  • Cryptswap not mounted?

    - by woody
    I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 The file /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla already exists and its contents are: [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Is my swap not setup correctly or is it not mounting?

    Read the article

  • Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

  • Am I missing something about these considerations about Leaderboard's database's schema?

    - by misiMe
    I just finished to develop a mobile game, now I want to implement an online leaerboard using mysql. I'm wondering about the database's schema, I thought about some possibilities: (I didn't got in detail with syntax because my question is just about the logic of it) Name: string; Score: integer I thought to ask the name just the first time. If, in the future, you will modify that, it will call just an update to the name associated with your id. Leaderboard(ID, Name, Score) ID: integer autoincrement, PrimaryKey With this kind of idea maybe the db will grow fast because if you choose everytime a different name for the score, it will add a new entry. Leaderboard(PhoneId, Name, Score) Here PhoneId will be the unique identifier of the phone, PrimaryKey. A con of this choice is that if you want to play with your friends' phone, you can't put a different name for the score. Leaderboard(Name, Score) Here Name is PrimaryKey. With that, if you enter a name that already exists, you will be prompted to choose another one. Do you agree with this considerations? What will you do? Am I missing something?

    Read the article

  • The latest version of the EJB 3.2 spec available on java.net project

    - by Marina Vatkina
    If you are not following us on the users alias, here is a quick update. Just before JavaOne, I uploaded the latest version of the EJB 3.2 Core document to the ejb-spec.java.net downloads. If you want to see the detailed changes, download it If you are interested in the high-level list, or would like to know what to look for, this is the list of changes since the previous version (found on the same download page): Specified that the SessionContext object in a the singleton session bean is thread-safe Clarified that the EJB timers distribution and failover rules apply only to persistent timers Clarified that non-persistent timers returned by getTimers and getAllTimers methods are from the same JVM as the caller Fixed section numbering (left over after moving it to its own chapter) in Ch 17 Noted that only 3.0 and 3.1 deployment descriptors are required to be supported in EJB 3.2 Lite for prior versions of the applications Fixes for EJB_SPEC-61 (Ambiguity in EJB lite local view support) and EJB_SPEC-59 (Improve references to the component-defining annotations) JMS/MDB changes: added new standard activation properties and the unique identifier, and rearranged sections for easier navigation Fixed unresolved cross-refs Updated the rule: only local asynchronous session bean invocations are supported in EJB 3.2 Lite Synchronized permissions in the Table with the permissions listed for the EJB Components in the Java EE Platform Specification Table EE.6-2 Specified that during processing of the close() method, the embeddable container cancels all pending asynchronous invocations and non-persistent timers Updated most of the referenced documents to their latest versions Happy reading!

    Read the article

  • How to automount NTFS usb sticks on Xubuntu 12.10?

    - by netimen
    I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

    Read the article

  • Installing ubuntu 12.04 on macbook pro9,2

    - by stariz77
    I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

    Read the article

  • External Full HD monitor and Virtual Desktop Size

    - by Stefan
    I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

    Read the article

  • Ubuntu 14.04: Fine tuning Touchpad for ThinkPad S431

    - by ramgorur
    I am using Ubuntu 14.04 on Lenovo ThinkPad S431. The touchpad is very bumpy, tricky to use. Slides down with a small touch, sometimes jerks erratically. I have tried to modify the settings in /usr/share/X11/xorg.conf.d/50-synaptics.conf file as below -- Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" MatchDevicePath "/dev/input/event*" Option "JumpyCursorThreshold" "250" Option "VertResolution" "100" # Option "HorizResolution" "65" # Option "MinSpeed" "1" # Option "MaxSpeed" "1" # Option "AccelerationProfile" "1" # Option "AdaptiveDeceleration" "8" # Option "ConstantDeceleration" "1" # Option "VelocityScale" "128" Option "HorizHysteresis" "150" Option "VertHysteresis" "150" EndSection There are lots of options here, does anyone know how to get a fine-tuned values for the above options (for ThinkPad S431)? The Hysteresis values seems to alleviate the problem a little bit, but failed to get a perfect result. EDIT: According to this bug report for ThinkPad X230 (+X230t), I set these values and quite good for now -- Option "VertResolution" "100" Option "HorizResolution" "65" Option "MinSpeed" "1" Option "MaxSpeed" "1" Option "AccelerationProfile" "2" Option "AdaptiveDeceleration" "16" Option "ConstantDeceleration" "16" Option "VelocityScale" "32" Option "HorizHysteresis" "50" Option "VertHysteresis" "50" and then you need to increase the cursor speed manually from the Unity mouse settings. But I am still looking for a fully functional (possibly with all the gestures) and a fine-tuned touchpad settings for S431. Further help is appreciated.

    Read the article

  • Connecting two monitors at the corners

    - by fastmultiplication
    I am using two separate X screens on two monitors and I would like them to be connected at the lower right corner. That is, if you move to the lower right corner of screen0 the mouse should appear at the upper left of screen1. I do not want an entire edge of each monitor to be permeable to the mouse. I modified the xorg.conf file like so: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Relative "Screen0" 1200 1000 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection (screen 0's resolution is 1280x1024) so there is a bit of overlap. However whenever I move the mouse to the bottom of screen0, the pointer appears at the upper left of screen1. And, the entire top of screen1 is permeable to the mouse and brings it to the lower left corner of screen0. I have tried various numbers in following the "relative" statement - if I put 1280 1024 the mouse does not cross over at all. If I use 1280 1023 the entire right side of screen0 is permeable. I haven't been able to find any documentation about how to explicitly tell the mouse where to crossover - is there some? It seems that xorg is being really aggressive in guessing where the mouse crossover should take place. Does anyone know how to do this? Thanks!

    Read the article

  • How do I configure an Intel HD Graphics 4000?

    - by derabbink
    First off, please note that last night I already posted this question to a launchpad mailing list, so this could be considered a cross post. However, I think this is a better place to ask the same question The question: How can I configure my Ubuntu 12.04, with upgraded kernel (3.6), to use the Intel HD Graphics 4000 adapter? (Intel HD 4000 is the standard of 3rd gen Intel Core i7 (Ivy Bridge) graphics adapter) Some output: $ glxinfo name of display: :0 X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 154 (GLX) Minor opcode of failed request: 19 (X_GLXQueryServerString) Serial number of failed request: 12 Current serial number in output stream: 12 $ cat /etc/X11/xorg.conf this is probably the farthest from what it should be Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Module" Load "glx" EndSection $ lspci I only listed the line I think are relevant. If you want more info in order to help me, please comment :) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 16:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 16:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Turks HDMI Audio [Radeon HD 6000 Series]

    Read the article

  • My new hard drive won't automount on boot

    - by user518
    I installed a new hard drive right before installing the new Ubuntu 11.10 by reformatting, not upgrading. I was able to mount my drive, and partition it. It's a 1TB, and I was able to transfer all of my music, and videos to it. For some reason, it won't mount on boot, and I can't figure out how to manually mount it afterwards either. Here's my current /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=e0fbdf09-f9a0-4336-bac3-ba4dc6cfbcc0 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=adf15180-c84c-4309-bc9f-085fd7464f89 none swap sw 0 0 /dev/sdc1 /media/sdc1 ext4 defaults 0 0 The last line is what I added for my hard drive. Here's the output from sudo lshw -C disk: % sudo lshw -C disk ~ *-disk:0 description: ATA Disk product: ST3250310AS vendor: Seagate physical id: 0 bus info: scsi@2:0.0.0 logical name: /dev/sda version: 3.AD serial: 6RYBF2QE size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000da204 *-cdrom description: DVD-RAM writer product: DVD+-RW DH-16A6S vendor: PLDS physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: YD11 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

    Read the article

  • Approach to Authenticate Clients to TCP Server

    - by dab
    I'm writing a Server/Client application where clients will connect to the server. What I want to do, is make sure that the client connecting to the server is actually using my protocol and I can "trust" the data being sent from the client to the server. What I thought about doing is creating a sort of hash on the client's machine that follows a particular algorithm. What I did in a previous version was took their IP address, the client version, and a few other attributes of the client and sent it as a calculated hash to the server, who then took their IP, and the version of the protocol the client claimed to be using, and calculated that number to see if they matched. This works ok until you get clients that connect from within a router environment where their internal IP is different from their external IP. My fix for this was to pass the client's internal IP used to calculate this hash with the authentication protocol. My fear is this approach is not secure enough. Since I'm passing the data used to create the "auth hash". Here's an example of what I'm talking about: Client IP: 192.168.1.10, Version: 2.4.5.2 hash = 2*4*5*1 * (1+9+2) * (1+6+8) * (1) * (1+0) Client Connects to Server client sends: auth hash ip version Server calculates that info, and accepts or denies the hash. Before I go and come up with another algorithm to prove a client can provide data a server (or use this existing algorithm), I was wondering if there are any existing, proven, and secure systems out there for generating a hash that both sides can generate with general knowledge. The server won't know about the client until the very first connection is established. The protocol's intent is to manage a network of clients who will be contributing data to the server periodically. New clients will be added simply by connecting the client to the server and "registering" with the server. So a client connects to the server for the first time, and registers their info (mac address or some other kind of unique computer identifier), then when they connect again, the server will recognize that client as a previous person and associate them with their data in the database.

    Read the article

  • File Adapter FileName Macros

    - by IntegrationOverload
    I can never find these when I need them...   Macro name Substitute value %datetime% Coordinated Universal Time (UTC) date time in the format YYYY-MM-DDThhmmss (for example, 1997-07-12T103508). %datetime_bts2000% UTC date time in the format YYYYMMDDhhmmsss, where sss means seconds and milliseconds (for example, 199707121035234 means 1997/07/12, 10:35:23 and 400 milliseconds). %datetime.tz% Local date time plus time zone from GMT in the format YYYY-MM-DDThhmmssTZD, (for example, 1997-07-12T103508+800). %DestinationParty% Name of the destination party. The value comes from the message context property BTS.DestinationParty. %DestinationPartyQualifier% Qualifier of the destination party. The value comes from the message context property BTS.DestinationPartyQualifier. %MessageID% Globally unique identifier (GUID) of the message in BizTalk Server. The value comes directly from the message context property BTS.MessageID. %SourceFileName% Name of the file from where the File adapter read the message. The file name includes the extension and excludes the file path, for example, Sample.xml. When substituting this property, the File adapter extracts the file name from the absolute file path stored in the FILE.ReceivedFileName context property. If the context property does not have a value, for example, if a message was received on an adapter other than the File adapter, the macro will not be substituted and will remain in the file name as is (for example, C:\Drop\%SourceFileName%). %SourceParty% Name of the source party from which the File adapter received the message. %SourcePartyQualifier% Qualifier of the source party from which the File adapter received the message. %time% UTC time in the format hhmmss. %time.tz% Local time plus time zone from GMT in the format hhmmssTZD (for example, 124525+530).

    Read the article

  • Partitions mixing up

    - by anon
    I am trying to install ubuntu alongside my windows 7. The problem is that ubuntu is not detecting all of my partitions and basically clubs together many of them. The same thing is done by using GParted. However this problem does not arise while I am using Windows - 7. I cant paste the image of GParted since I dont have the required reputation... I think this could be due to stray GPT data but am not sure how to take care of it. Can someone help me figure this out ? The output of fdisk -l is as follows Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20000000 Device Boot Start End Blocks Id System /dev/sda1 63 2047 992+ 42 SFS /dev/sda2 * 2048 206847 102400 42 SFS /dev/sda3 206848 146802687 73297920 42 SFS /dev/sda4 146802688 625140399 239168856 42 SFS However actually I have 4 partitions along with 25 gb unallocated space that I had thought to use for Ubuntu installation.

    Read the article

  • Is it justified to use project-wide unique function and variable names to help future refactoring?

    - by kahoon
    Refactoring tools (like ReSharper) often can't be sure whether to rename a given identifier when, for example refactoring a JavaScript function. I guess this is a consequence of JavaScript's dynamic nature. ReSharper solves this problem by offering to rename reasonable lexical matches too. The developer can opt out of renaming certain functions, if he finds that the lexical match is purely accidental. This means that the developer has to approve every instance that will be affected by the renaming. For example let's consider we have two Backbone classes which are used completely independently from each other in our application: var Header = Backbone.View.extend({ close: function() {...} }) var Dialog = Backbone.View.extend({ close: function() {...} }) If you try to rename Dialog's close method to for example closeAndNotify, then ReSharper will offer to rename all occurences of Header's close method just because they are the same lexically prior to the renaming. To avoid this problem, please consider this: var Header = Backbone.View.extend({ closeHeader: function() {...} }) var Dialog = Backbone.View.extend({ closeDialog: function() {...} }) Now you can rename closeDialog unambiguously - given that you have no other classes having a method with the same name. Is it worth it to name my functions this way to help future refactoring?

    Read the article

  • How do I get my internal HDD to mount at startup?

    - by el_gallo_azul
    It's either not intuitive or not working in Ubuntu 14.04. I want to mount my internal HDD at at startup (I boot from an SSD). I attempt to set this, following this procedure: Open Disks utility Select the disk Below the disk's Volumes, click on the More actions button Select Edit Mount Options... Select Automatic Mount Options "Off" Under Mount Options, ensure that Mount at startup is selected Click OK Enter password into Authenticate dialog box Restart but this procedure doesn't work. Upon rebooting, and after Grub attempts to start Ubuntu, I receive the error message "An error occurred while mounting /mnt/4f721fc0-8072-453f-b48f-ca686bd89549. Press S to skip mounting or M for manual recovery". That identifier "4f721fc0-8072-453f-b48f-ca686bd89549" was automatically assigned by Ubuntu. I press S and the boot process continues OK. If I try to mount the disk immediately after booting, I receive the error message "Unable to access "Storage"" (I named the volume Storage). So then I start the Disks utility and set it to Automatic Mount Options "On" and reboot. To me, it seems like this should work, but it doesn't. Here are a number of photos of the process (Alt+PrtScn doesn't work after selecting More actions).

    Read the article

  • Help with Boost Grammar

    - by Decmanc04
    I have been using the following win32 console code to try to parse a B Machine Grammar embedded within C++ using Boost Spirit grammar template. I am a relatively new Boost user. The code compiles, but when I run the .exe file produced by VC++2008, the program partially parses the input file. I believe the problem is with my grammar definition or the functions attached as semantic atctions. The code is given below: // BIFAnalyser.cpp : Defines the entry point for the console application. // // /*============================================================================= Copyright (c) Temitope Jos Onunkun 2010 http://www.dcs.kcl.ac.uk/pg/onun/ Use, modification and distribution is subject to the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) =============================================================================*/ //////////////////////////////////////////////////////////////////////////// // // // B Machine parser using the Boost "Grammar" and "Semantic Actions". // // // //////////////////////////////////////////////////////////////////////////// #include <boost/spirit/core.hpp> #include <boost/tokenizer.hpp> #include <iostream> #include <string> #include <fstream> #include <vector> #include <utility> /////////////////////////////////////////////////////////////////////////////////////////// using namespace std; using namespace boost::spirit; /////////////////////////////////////////////////////////////////////////////////////////// // // Semantic actions // //////////////////////////////////////////////////////////////////////////// vector<string> strVect; namespace { //semantic action function on individual lexeme void do_noint(char const* str, char const* end) { string s(str, end); if(atoi(str)) { ; } else { strVect.push_back(s); cout << "PUSH(" << s << ')' << endl; } } //semantic action function on addition of lexemes void do_add(char const*, char const*) { cout << "ADD" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; } //semantic action function on subtraction of lexemes void do_subt(char const*, char const*) { cout << "SUBTRACT" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; } //semantic action function on multiplication of lexemes void do_mult(char const*, char const*) { cout << "\nMULTIPLY" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; cout << "\n"; } //semantic action function on division of lexemes void do_div(char const*, char const*) { cout << "\nDIVIDE" << endl; for(vector<string>::iterator vi = strVect.begin(); vi < strVect.end(); ++vi) cout << *vi << " "; } //semantic action function on simple substitution void do_sSubst(char const* str, char const* end) { string s(str, end); //use boost tokenizer to break down tokens typedef boost::tokenizer<boost::char_separator<char> > Tokenizer; boost::char_separator<char> sep("-+/*:=()"); // default char separator Tokenizer tok(s, sep); Tokenizer::iterator tok_iter = tok.begin(); pair<string, string > dependency; //create a pair object for dependencies //save first variable token in simple substitution dependency.first = *tok.begin(); //create a vector object to store all tokens vector<string> dx; // for( ; tok_iter != tok.end(); ++tok_iter) //save all tokens in vector { dx.push_back(*tok_iter ); } vector<string> d_hat; //stores set of dependency pairs string dep; //pairs variables as string object for(int unsigned i=1; i < dx.size()-1; i++) { dependency.second = dx.at(i); dep = dependency.first + "|->" + dependency.second + " "; d_hat.push_back(dep); } cout << "PUSH(" << s << ')' << endl; for(int unsigned i=0; i < d_hat.size(); i++) cout <<"\n...\n" << d_hat.at(i) << " "; cout << "\nSIMPLE SUBSTITUTION\n"; } //semantic action function on multiple substitution void do_mSubst(char const* str, char const* end) { string s(str, end); //use boost tokenizer to break down tokens typedef boost::tokenizer<boost::char_separator<char> > Tok; boost::char_separator<char> sep("-+/*:=()"); // default char separator Tok tok(s, sep); Tok::iterator tok_iter = tok.begin(); // string start = *tok.begin(); vector<string> mx; for( ; tok_iter != tok.end(); ++tok_iter) //save all tokens in vector { mx.push_back(*tok_iter ); } mx.push_back("END\n"); //add a marker "end" for(unsigned int i=0; i<mx.size(); i++) { // if(mx.at(i) == "END" || mx.at(i) == "||" ) // break; // else if( mx.at(i) == "||") // do_sSubst(str, end); // else // { // do_sSubst(str, end); // } cout << "\nTokens ... " << mx.at(i) << " "; } cout << "PUSH(" << s << ')' << endl; cout << "MULTIPLE SUBSTITUTION\n"; } } //////////////////////////////////////////////////////////////////////////// // // Simple Substitution Grammar // //////////////////////////////////////////////////////////////////////////// // Simple substitution grammar parser with integer values removed struct Substitution : public grammar<Substitution> { template <typename ScannerT> struct definition { definition(Substitution const& ) { multi_subst = (simple_subst [&do_mSubst] >> +( str_p("||") >> simple_subst [&do_mSubst]) ) ; simple_subst = (Identifier >> str_p(":=") >> expression)[&do_sSubst] ; Identifier = alpha_p >> +alnum_p//[do_noint] ; expression = term >> *( ('+' >> term)[&do_add] | ('-' >> term)[&do_subt] ) ; term = factor >> *( ('*' >> factor)[&do_mult] | ('/' >> factor)[&do_div] ) ; factor = lexeme_d[( (alpha_p >> +alnum_p) | +digit_p)[&do_noint]] | '(' >> expression >> ')' | ('+' >> factor) ; } rule<ScannerT> expression, term, factor, Identifier, simple_subst, multi_subst ; rule<ScannerT> const& start() const { return multi_subst; } }; }; //////////////////////////////////////////////////////////////////////////// // // Main program // //////////////////////////////////////////////////////////////////////////// int main() { cout << "************************************************************\n\n"; cout << "\t\t...Machine Parser...\n\n"; cout << "************************************************************\n\n"; // cout << "Type an expression...or [q or Q] to quit\n\n"; //prompt for file name to be input cout << "Please enter a filename...or [q or Q] to quit:\n\n "; char strFilename[256]; //file name store as a string object cin >> strFilename; ifstream inFile(strFilename); // opens file object for reading //output file for truncated machine (operations only) Substitution elementary_subst; // Simple substitution parser object string str, next; // inFile.open(strFilename); while (inFile >> str) { getline(cin, next); str += next; if (str.empty() || str[0] == 'q' || str[0] == 'Q') break; parse_info<> info = parse(str.c_str(), elementary_subst, space_p); if (info.full) { cout << "\n-------------------------\n"; cout << "Parsing succeeded\n"; cout << "\n-------------------------\n"; } else { cout << "\n-------------------------\n"; cout << "Parsing failed\n"; cout << "stopped at: \": " << info.stop << "\"\n"; cout << "\n-------------------------\n"; } } cout << "Please enter a filename...or [q or Q] to quit\n"; cin >> strFilename; return 0; } The contents of the file I tried to parse, which I named "mf7.txt" is given below: debt:=(LoanRequest+outstandingLoan1)*20 || newDebt := loanammount-paidammount The output when I execute the program is: ************************************************************ ...Machine Parser... ************************************************************ Please enter a filename...or [q or Q] to quit: c:\tplat\mf7.txt PUSH(LoanRequest) PUSH(outstandingLoan1) ADD LoanRequest outstandingLoan1 MULTIPLY LoanRequest outstandingLoan1 PUSH(debt:=(LoanRequest+outstandingLoan1)*20) ... debt|->LoanRequest ... debt|->outstandingLoan1 SIMPLE SUBSTITUTION Tokens ... debt Tokens ... LoanRequest Tokens ... outstandingLoan1 Tokens ... 20 Tokens ... END PUSH(debt:=(LoanRequest+outstandingLoan1)*20) MULTIPLE SUBSTITUTION ------------------------- Parsing failedstopped at: ": " ------------------------- My intention is to capture only the variables in the file, which I managed to do up to the "||" string. Clearly, the program is not parsing beyond the "||" string in the input file. I will appreciate assistance to fix the grammar. SOS, please.

    Read the article

  • When I shutdown the computer, it restarts

    - by Prabu
    I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

    Read the article

  • CodePlex Daily Summary for Sunday, November 21, 2010

    CodePlex Daily Summary for Sunday, November 21, 2010Popular ReleasesMDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;Smith Html Editor: Smith Html Editor V0.75: The first public release.MiniTwitter: 1.59: MiniTwitter 1.59 ???? ?? User Streams ????????????????? ?? ?????????????? ???????? ?????????????.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Code Sample from Microsoft: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesAutoLoL: AutoLoL v1.4.2: Added support for more clients (French and Russian) Settings are now stored sepperatly for each user on a computer Auto Login is much faster now Auto Login detects and handles caps lock state properly nowTailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.9: Contains a number of bug fixes and additional tutorial steps as well as complete database implementation details.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3 and demos: It contains a rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6 new stuff in 1.3 Autocomplete helper Autocomplete and AjaxDropdown can have parentId and be filled with data depending on the value of the parent PopupForm besides Content("ok") on success can also return J...Nearforums - ASP.NET MVC forum engine: Nearforums v4.1: Version 4.1 of the ASP.NET MVC forum engine, with great improvements: TinyMCE added as visual editor for messages (removed CKEditor). Integrated AntiSamy for cleaner html user post and add more prevention to potential injections. Admin status page: a page for the site admin to check the current status of the configuration / db / etc. View Roadmap for more details.UltimateJB: UltimateJB 2.01 PL3 KakaRoto + PSNYes by EvilSperm: Voici une version attendu avec impatience pour beaucoup : - La Version PSNYes pour pouvoir jouer sur le PSN avec une PS3 Jailbreaker. - Pour l'instant le PSNYes n'est disponible qu'avec les PS3 en firmwares 3.41 !!! - La version PL3 KAKAROTO intégre ses dernières modification et prépare a l'intégration du Firmware 3.30 !!! Conclusion : - UltimateJB PSNYes => Valide l'utilisation du PSN : Uniquement compatible avec les 3.41 - ultimateJB DEFAULT => Pas de PSN mais disponible pour les PS3 sui...New Projects1600hours: 1600hours project made in C++.aoleDownload: Aole Series DownloadBills and Cash Flow: Bills and Cash Flow is a simple multi-tenant application to track bills and view cash flowCUDAagrep: CUDAagrep, a fast CUDA implementation of agrep algorithm for approximate DNA/RNA sequence matching.DNN5 Simple Ticketing Module: This is a simple DNN module that accepts trouble tickets and creates a knowledge base for a company.EntityOH: Dynamic Entities ORMFxcop ASP.NET Security Rules: Fxcop ASP.NET security rules This is a set of code analysis rules aiming at analyzing ASP.NET and ASP.NET MVC security against best practices. The rules can be used by Visual Studio 10 Ultimate or FxCop v10 standalone.Head First Design Patterns - Code Examples in C#: This project consists of ported code examples from the book Head First Design Patterns by Eric and Elizabeth Freeman into C#.HTML5 Media Player (Video / Audio): A .NET implementation of the VideoJS and AudioJS open source projects with video and audio support for HTML5. Excellent for use with iPod, iPad, iPhone, etc.Keyword Auction Simulator: This is the project for simulating the keyword auction like Adwords.mAdcOW Office Add-Ins: A collection of handy Office 2010 add-ins.Manga to Epub: Manga to Epub allow you to convert a bunch of images to a single "epub" file, readable on your reader. It handles most of the image types as well as several archives. You have multiple customization options, such as trimming the images in order to remove white borders.Mapua Career Ramp Up: A joint endeavor with the Philippine IT industry leaders and with Mapua School of Information Technology to build an online collaborative database system to Ramp-Up graduating students on their career as future IT Professionals. minami: Minami is a Project what focuse the work on Stability and Features. Is Development in C++minami-dev: Comes later the Description.Mobile RPG: Mobile RPG is five ATtiny85 microcontrollers playing their own RPG characters with a primary MCU acting as GM. Its a fun exercise in autonomous role playing.NetSnoop: Netsnoop allows everyone to get a quick overview over alle the current connections on their workstation.nGso: GSO algorithm implementation based on http://www.springerlink.com/content/y065470472612847/fulltext.pdf Glowworm swarm optimization for simultaneous capture of multiple local optima of multimodal functions K.N. Krishnanand · D. GhoseOpenID Starter Kit for ASP.NET MVC: OpenID Starter Kit for ASP.NET MVC is used to jump start building your web application with ASP.NET MVC with OpenID login system. It is also a good education resource if you want to learn how to implement OpenID into a ASP.NET MVC.Orchard Contact Us Module: Add a contact us page to your Orchard site using this module.Persian Scheduler and Calendar Control: This is a Jalali (Persian or shamsi) calendar and scheduler control in silverlight. Choosing the name 'Jalali' is in honor of 'Hakim omar khayyam' the founder of Jalali calendar. This is under the lisence of 'Barid New Systems' company.Popfly Metadata Generator: Creates Metadata for New project.PurpleStoat: A modular, extensible Silverlight application shell using Prism, Unity and the Enterprise Library, and written in C#. It includes a WCF service which provides AuthZ and logging services to the shell, which are also available to the modules.QL Config Compare Tool: The QL Config Compare Tool enables you to compare two QuakeLive configs. It creates a detailed overview of the differences and is able to save statistics.SQL PHI Identifier: SQL PHI Identifier is an auditing tool for DBA's in a healthcare environment to be able to help identify which databases/tables might hold protected health information (PHI). Using this information a DBA can then take the necessary steps to secure that data adequately.Sqlite ORM: Sqlite ORM is at present a simple Class to Table mapper for Sqlite databases. Tables are created on demand, and designed to future proof for Sharding. Code has 100% unit test coverage.Test shop: Test shopVarMerger - ??????? ????????? ??? ???????? ????????????.: VarMerger - ?????????? (Add-In) ??? MS Word 2007, ??????? ????????? ??????????? ???????? ???????? ??????? ?? ??????, ?????????? ????????? ?????? ? ??????. Visual Studio Add-In For creating Vista Gadget: The absence of tools in Visual Studio that can help developers to create Vista gadgets is strange and disappointing, in my opinion., I want to show you some tools that can help you to develop Vista gadgets using only Visual Studio 2008 or 2010 IDE.Vocal Remover - VST Plugin: VST Plugin Removes vocal form songs using M/S system trick with EQ on mid signal. source in C++ IDE: Visual Studio 2010 Express Edition LIB: Steinberg VST SDK 2.4Windows Phone 7 To Go: A project with demos for Windows Phone 7 FeaturesWinware: Winware is not only an Entity Framework, but beyond.XTengine: Xtengine makes it easier for XNA developers to develop in a compositional manner. You'll no longer have to write specific game classes with deep hierarchies or hardcode to load levels. It's developed in C# with XNA 4.0, with WP7 in mind.

    Read the article

  • Building a &ldquo;real&rdquo; extension for Expression Blend

    - by Timmy Kokke
    .Last time I showed you how to get started building extensions for Expression Blend. Lets build a useful extension this time and go a bit deeper into Blend. Source of project  => here Compiled dll => here (extract into /extensions folder of Expression Blend)   The Extension When working on large Xaml files in Blend it’s often hard to find a specific control in the "Objects and Timeline Pane”. An extension that searches the active document and presents all elements that satisfy the query would be helpful. When the user starts typing a search query a search will be performed and the results are shown in the list. After the user selects an item in the results list, the control in the "Objects and Timeline Pane” will be selected. Below is a sketch of what it is going to look like. The Solution Create a new WPF User Control project as shown in the earlier tutorial in the Configuring the extension project section, but name it AdvancedSearch this time. Delete the default UserControl1.Xaml to clear the solution (a new user control will be added later thought, but adding a user control is easier then renaming one). Create the main entry point of the addin by adding a new class to the solution and naming this  AdvancedSearchPackage. Add a reference to Microsoft.Expression.Extensibility and to System.ComponentModel.Composition . Implement the IPackage interface and add the Export attribute from the MEF to the definition. While you’re at it. Add references to Microsoft.Expression.DesignSurface, Microsoft.Expression.FrameWork and Microsoft.Expression.Markup. These will be used later. The Load method from the IPackage interface is going to create a ViewModel to bind to from the UI. Add another class to the solution and name this AdvancedSearchViewModel. This class needs to implement the INotifyPropertyChanged interface to enable notifications to the view.  Add a constructor to the class that takes an IServices interface as a parameter. Create a new instance of the AdvancedSearchViewModel in the load method in the AdvanceSearchPackage class. The AdvancedSearchPackage class should looks like this now:   using System.ComponentModel.Composition; using Microsoft.Expression.Extensibility;   namespace AdvancedSearch { [Export(typeof(IPackage))] public class AdvancedSearchPackage:IPackage {   public void Load(IServices services) { new AdvancedSearchViewModel(services); }   public void Unload() { } } }   Add a new UserControl to the project and name this AdvancedSearchView. The View will be created by the ViewModel, which will pass itself to the constructor of the view. Change the constructor of the View to take a AdvancedSearchViewModel object as a parameter. Add a private field to store the ViewModel and set this field in the constructor. Point the DataContext of the view to the ViewModel. The View will look something like this now:   namespace AdvancedSearch { public partial class AdvancedSearchView:UserControl { private readonly AdvancedSearchViewModel _advancedSearchViewModel;   public AdvancedSearchView(AdvancedSearchViewModel advancedSearchViewModel) { _advancedSearchViewModel = advancedSearchViewModel; InitializeComponent(); this.DataContext = _advancedSearchViewModel; } } }   The View is going to be created in the constructor of the ViewModel and stored in a read only property.   public FrameworkElement View { get; private set; }   public AdvancedSearchViewModel(IServices services) { _services = services; View = new AdvancedSearchView(this); } The last thing the solution needs before we’ll wire things up is a new class, PossibleNode. This class will be used later to store the search results. The solution should look like this now:   Adding UI to the UI The extension should build and run now, although nothing is showing up in Blend yet. To enable the user to perform a search query add a TextBox and a ListBox to the AdvancedSearchView.xaml file. I’ve set the rows of the grid too to make them look a little better. Add the TextChanged event to the TextBox and the SelectionChanged event to the ListBox, we’ll need those later on. <Grid> <Grid.RowDefinitions> <RowDefinition Height="32" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <TextBox TextChanged="SearchQueryTextChanged" HorizontalAlignment="Stretch" Margin="4" Name="SearchQuery" VerticalAlignment="Stretch" /> <ListBox SelectionChanged="SearchResultSelectionChanged" HorizontalAlignment="Stretch" Margin="4" Name="SearchResult" VerticalAlignment="Stretch" Grid.Row="1" /> </Grid>   This will create a user interface like: To make the View show up in Blend it has to be registered with the WindowService. The GetService<T> method is used to get services from Blend, which are your entry points into Blend.When writing extensions you will encounter this method very often. In this case we’re asking for an IWindowService interface. The IWindowService interface serves events for changing windows and themes, is used for adding or removing resources and is used for registering and unregistering Palettes. All panes in Blend are palettes and are registered thru the RegisterPalette method. The first parameter passed to this method is a string containing a unique ID for the palette. This ID can be used to get access to the palette later. The second parameter is the View. The third parameter is a title for the pane. This title is shown when the pane is visible. It is also shown in the window menu of Blend. The last parameter is a KeyBinding. I have chosen Ctrl+Shift+F to call the Advanced Search pane. This value is also shown in the window menu of Blend.   services.GetService<IWindowService>().RegisterPalette( "AdvancedSearch", viewModel.View, "Advanced Search", new KeyBinding { Key = Key.F, Modifiers = ModifierKeys.Control | ModifierKeys.Shift } );   You can compiler and run now. After Blend starts you can hit Ctrl+Shift+F or go the windows menu to call the advanced search extension. Searching for controls The search has to be cleared on every change of the active document. The DocumentServices fires an event every time a new document is opened, a document is closed or another document view is selected. Add the following line to the constructor of the ViewModel to handle the ActiveDocumentChanged event:   _services.GetService<IDocumentService>().ActiveDocumentChanged += ActiveDocumentChanged;   And implement the ActiveDocumentChanged method:   private void ActiveDocumentChanged(object sender, DocumentChangedEventArgs e) { }   To get to the contents of the document we first need to get access to the “Objects and Timeline” pane. This pane is registered in the PaletteRegistry in the same way as this extension has registered itself. The palettes are accessible thru an associative array. All you need to provide is the Identifier of the palette you want. The Id of the “Objects and Timeline” pane is “Designer_TimelinePane”. I’ve included a list of the other default panes at the bottom of this article. Each palette has a Content property which can be cast to the type of the pane.   var timelinePane = (TimelinePane)_services.GetService<IWindowService>() .PaletteRegistry["Designer_TimelinePane"] .Content;   Add a private field to the top of the AdvancedSearchViewModel class to store the active SceneViewModel. The SceneViewModel is needed to set the current selection and to get the little icons for the type of control.   private SceneViewModel _activeSceneViewModel;   When the active SceneViewModel changes, the ActiveSceneViewModel is stored in this field. The list of possible nodes is cleared and an PropertyChanged event is fired for this list to notify the UI to clear the list. This will make the eventhandler look like this: private void ActiveDocumentChanged(object sender, DocumentChangedEventArgs e) { var timelinePane = (TimelinePane)_services.GetService<IWindowService>() .PaletteRegistry["Designer_TimelinePane"].Content;   _activeSceneViewModel = timelinePane.ActiveSceneViewModel; PossibleNodes = new List<PossibleNode>(); InvokePropertyChanged("PossibleNodes"); } The PossibleNode class used to store information about the controls found by the search. It’s a dumb data class with only 3 properties, the name of the control, the SceneNode and a brush used for the little icon. The SceneNode is the base class for every possible object you can create in Blend, like Brushes, Controls, Annotations, ResourceDictionaries and VisualStates. The entire PossibleNode class looks like this:   using System.Windows.Media; using Microsoft.Expression.DesignSurface.ViewModel;   namespace AdvancedSearch { public class PossibleNode { public string Name { get; set; } public SceneNode SceneNode { get; set; } public DrawingBrush IconBrush { get; set; } } }   Add these two methods to the AdvancedSearchViewModel class:   public void Search(string searchText) { } public void SelectElement(PossibleNode node){ }   Both these methods are going to be called from the view. The Search method performs the search and updates the PossibleNodes list.  The controls in the active document can be accessed thru TimeLineItemsManager class. This class contains a read only collection of TimeLineItems. By using a Linq query the possible nodes are selected and placed in the PossibleNodes list.   var timelineItemManager = new TimelineItemManager(_activeSceneViewModel); PossibleNodes = new List<PossibleNode>( (from d in timelineItemManager.ItemList where d.DisplayName.ToLowerInvariant().StartsWith( searchText.ToLowerInvariant()) select new PossibleNode() { IconBrush = d.IconBrush, SceneNode = d.SceneNode, Name = d.DisplayName }).ToList() ); InvokePropertyChanged(InternalConst.PossibleNodes);   The Select method is pretty straight forward. It contains two lines.The first to clear the selection. Otherwise the selected element would be added to the current selection. The second line selects the nodes. It is given a new array with the node to be selected.   _activeSceneViewModel.ClearSelections(); _activeSceneViewModel.SelectNodes(new[] { node.SceneNode });   The last thing that needs to be done is to wire the whole thing to the View. The two event handlers just call the Search and SelectElement methods on the ViewModel.   private void SearchQueryTextChanged(object sender, TextChangedEventArgs e) { _advancedSearchViewModel.Search(SearchQuery.Text); }   private void SearchResultSelectionChanged(object sender, SelectionChangedEventArgs e) { if(e.AddedItems.Count>0) { _advancedSearchViewModel.SelectElement(e.AddedItems[0] as PossibleNode); } }   The Listbox has to be bound to the PossibleNodes list and a simple DataTemplate is added to show the selection. The IconWithOverlay control can be found in the Microsoft.Expression.DesignSurface.UserInterface.Timeline.UI namespace in the Microsoft.Expression.DesignSurface assembly. The ListBox should look something like:   <ListBox SelectionChanged="SearchResultSelectionChanged" HorizontalAlignment="Stretch" Margin="4" Name="SearchResult" VerticalAlignment="Stretch" Grid.Row="1" ItemsSource="{Binding PossibleNodes}"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <tlui:IconWithOverlay Margin="2,0,10,0" Width="12" Height="12" SourceBrush="{Binding Path=IconBrush, Mode=OneWay}" /> <TextBlock Text="{Binding Name}"/> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox>   Compile and run. Inside Blend the extension could look something like below. What’s Next When you’ve got the extension running. Try placing breakpoints in the code and see what else is in there. There’s a lot to explore and build extension on. I personally would love an extension to search for resources. Last but not least, you can download the source of project here.  If you have any questions let me know. If you just want to use this extension, you can download the compiled dll here. Just extract the . zip into the /extensions folder of Expression Blend. Notes Target framework I ran into some issues when using the .NET Framework 4 Client Profile as a target framework. I got some strange error saying certain obvious namespaces could not be found, Microsoft.Expression in my case. If you run into something like this, try setting the target framework to .NET Framework 4 instead of the client version.   Identifiers of default panes Identifier Type Title Designer_TimelinePane TimelinePane Objects and Timeline Designer_ToolPane ToolPane Tools Designer_ProjectPane ProjectPane Projects Designer_DataPane DataPane Data Designer_ResourcePane ResourcePane Resources Designer_PropertyInspector PropertyInspector Properties Designer_TriggersPane TriggersPane Triggers Interaction_Skin SkinView States Designer_AssetPane AssetPane Assets Interaction_Parts PartsPane Parts Designer_ResultsPane ResultsPane Results

    Read the article

  • Application tried to present modally an active controller ios

    - by Matthew
    I was trying to set the ViewController with a parent view controller before it shows show that it can provide call backs, I done this using PrepareForSegue - (void) prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender { if ([segue.identifier isEqualToString:@"newQuarter"]) { [segue.destinationViewController setParentViewController:self]; } } It crashed giving me the error message: Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Application tried to present modally an active controller. So I tried using another method and set up a new view controller on the button touches up, - (IBAction) buttonClicked { NewViewController *newController = [[NewViewController alloc] init]; [newController setParentViewController:self]; [self presentViewController:newController animated:YES completion:nil]; } but with no luck it is still giving me the same error message, can anyone please advice? Thanks!

    Read the article

  • Play Framework: Error getting sequence nextval using H2 in-memory database

    - by alexhanschke
    As the title suggests, I get an error running Play 2.0.1 Tests using a FakeApplication w/ H2 in memory. I set up a basic unit test: public class ModelTest { @Test public void checkThatIndustriesExist() { running(fakeApplication(inMemoryDatabase()), new Runnable() { public void run() { Industry industry = new Industry(); industry.name = "Some name"; industry.shortname = "some-name"; industry.save(); assertThat(Industry.find.all()).hasSize(1); } }); } Which yields the following exception: [info] test.ModelTest [error] Test test.ModelTest.checkThatIndustriesExist failed: Error getting sequence nextval [error] at com.avaje.ebean.config.dbplatform.SequenceIdGenerator.getMoreIds(SequenceIdGenerator.java:213) [error] at com.avaje.ebean.config.dbplatform.SequenceIdGenerator.loadMoreIds(SequenceIdGenerator.java:163) [error] at com.avaje.ebean.config.dbplatform.SequenceIdGenerator.nextId(SequenceIdGenerator.java:118) [error] at com.avaje.ebeaninternal.server.deploy.BeanDescriptor.nextId(BeanDescriptor.java:1218) [error] at com.avaje.ebeaninternal.server.persist.DefaultPersister.setIdGenValue(DefaultPersister.java:1304) [error] at com.avaje.ebeaninternal.server.persist.DefaultPersister.insert(DefaultPersister.java:403) [error] at com.avaje.ebeaninternal.server.persist.DefaultPersister.saveEnhanced(DefaultPersister.java:345) [error] at com.avaje.ebeaninternal.server.persist.DefaultPersister.saveRecurse(DefaultPersister.java:315) [error] at com.avaje.ebeaninternal.server.persist.DefaultPersister.save(DefaultPersister.java:282) [error] at com.avaje.ebeaninternal.server.core.DefaultServer.save(DefaultServer.java:1577) [error] at com.avaje.ebeaninternal.server.core.DefaultServer.save(DefaultServer.java:1567) [error] at com.avaje.ebean.Ebean.save(Ebean.java:538) [error] at play.db.ebean.Model.save(Model.java:76) [error] at test.ModelTest$1.run(ModelTest.java:24) [error] at play.test.Helpers.running(Helpers.java:277) [error] at test.ModelTest.checkThatIndustriesExist(ModelTest.java:21) [error] ... [error] Caused by: org.h2.jdbc.JdbcSQLException: Syntax Fehler in SQL Befehl "SELECT INDUSTRY_SEQ.NEXTVAL UNION[*] SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL "; erwartet "identifier" [error] Syntax error in SQL statement "SELECT INDUSTRY_SEQ.NEXTVAL UNION[*] SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL UNION SELECT INDUSTRY_SEQ.NEXTVAL "; expected "identifier"; SQL statement: [error] select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval union select industry_seq.nextval [42001-158] [error] at org.h2.message.DbException.getJdbcSQLException(DbException.java:329) [error] at org.h2.message.DbException.get(DbException.java:169) [error] at org.h2.message.DbException.getSyntaxError(DbException.java:194) [error] at org.h2.command.Parser.readColumnIdentifier(Parser.java:2777) [error] at org.h2.command.Parser.readTermObjectDot(Parser.java:2336) [error] at org.h2.command.Parser.readTerm(Parser.java:2453) [error] at org.h2.command.Parser.readFactor(Parser.java:2035) [error] at org.h2.command.Parser.readSum(Parser.java:2022) [error] at org.h2.command.Parser.readConcat(Parser.java:1995) [error] at org.h2.command.Parser.readCondition(Parser.java:1860) [error] at org.h2.command.Parser.readAnd(Parser.java:1841) [error] at org.h2.command.Parser.readExpression(Parser.java:1833) [error] at org.h2.command.Parser.parseSelectSimpleSelectPart(Parser.java:1746) [error] at org.h2.command.Parser.parseSelectSimple(Parser.java:1778) [error] at org.h2.command.Parser.parseSelectSub(Parser.java:1673) [error] at org.h2.command.Parser.parseSelectUnion(Parser.java:1518) [error] at org.h2.command.Parser.parseSelect(Parser.java:1506) [error] at org.h2.command.Parser.parsePrepared(Parser.java:405) [error] at org.h2.command.Parser.parse(Parser.java:279) [error] at org.h2.command.Parser.parse(Parser.java:251) [error] at org.h2.command.Parser.prepareCommand(Parser.java:217) [error] at org.h2.engine.Session.prepareLocal(Session.java:415) [error] at org.h2.engine.Session.prepareCommand(Session.java:364) [error] at org.h2.jdbc.JdbcConnection.prepareCommand(JdbcConnection.java:1119) [error] at org.h2.jdbc.JdbcPreparedStatement.<init>(JdbcPreparedStatement.java:71) [error] at org.h2.jdbc.JdbcConnection.prepareStatement(JdbcConnection.java:267) [error] at com.jolbox.bonecp.ConnectionHandle.prepareStatement(ConnectionHandle.java:820) [error] at com.avaje.ebean.config.dbplatform.SequenceIdGenerator.getMoreIds(SequenceIdGenerator.java:193) [error] ... 80 more My model looks like this: @Entity @Table(name = "industry") public class Industry extends Model { @Id public Long id; public String name; public String shortname; // called in the view to trigger lazy-loading public String getName() { return name; } public static Finder<Long, Industry> find = new Finder<Long, Industry>(Long.class, Industry.class); } ... and finally the relevant part from my initial evolution: create table industry ( id bigint not null, name varchar(255), shortname varchar(255), constraint pk_industry primary key (id) } create sequence industry_seq start with 1000; Everything works fine running on my PostgreSQL DB, and from my point of view the code is not any different from the Play2.0 Computer Database Sample. I am happy for any help - thanks! Regards, Alex

    Read the article

  • dojox.grid.DataGrid can't display repeat rows?

    - by Robert
    We have a situation where we need to display data from a database in a grid which has repeat rows, but it seems at least the basic examples fail when the cell data is identical with Sorry, an error occurred. An example follows: <script dojo.require("dojo.data.ItemFileWriteStore"); dojo.require("dojox.grid.DataGrid"); var historyData = { 'identifier': 'time', 'label': 'time', 'items': [ { 'message': 'Please turn in your TPS reports immediately', 'time': 'March 3 2010 7:20 AM', 'sentBy':'Bill Lumbergh' }, { 'message': 'Please turn in your TPS reports immediately', 'time': 'March 3 2010 7:20 AM', 'sentBy':'Bill Lumbergh' }] }; var historyGridLayout = [ [{ field: "message", name: "Message" }, { field: "time", name: "Display Date & Time" }, { field: "sentBy", name: "Sent By" }]]; </script <body class="tundra " <div dojoType="dojo.data.ItemFileWriteStore" data="historyData" jsId="historyStore" </div <div id="grid" dojoType="dojox.grid.DataGrid" store="historyStore" structure="historyGridLayout" </div </body Help!

    Read the article

  • Custom HTML attributes on SelectListItems in MVC2?

    - by blesh
    I have a need to add custom HTML attributes, specifically classes or styles to option tags in the selects generated by Html.DropDownFor(). I've been playing with it, and for the life of me I can't figure out what I need to do to get what I need working. Assuming I have a list of colors that I'm generating the dropdown for, where the option value is the color's identifier, and the text is the name... here's what I'd like to be able to see as output: <select name="Color"> <option value="1" style="background:#ff0000">Red</option> <option value="2" style="background:#00ff00">Green</option> <option value="3" style="background:#0000ff">Blue</option> <!-- more here --> <option value="25" style="background:#f00f00">Foo Foo</option> </select

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >