Search Results

Search found 12251 results on 491 pages for 'intel wireless card'.

Page 39/491 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

  • Configuring WPA WiFi in Ubuntu 10.10

    - by sma
    I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

    Read the article

  • Can't find PC on network

    - by Simon Verbeke
    I just got myself a new laptop, and set it up. It is connected to the wireless internet in my home. I then wanted to create a homegroup between the laptop and my desktop, but they can't find each other. Probably because the desktop has a wired connection to the router and the laptop is connected to a wireless access point. The router and the AP are connected to a switch in the middle by cable. A sketch of the network: Laptop - - - Wireless Access Point ----- Switch ----- Router ----- Desktop ^ ^ ^ ^ Wireless Wired Wired Wired They both point to the same gateway and DHCP-server (on 192.168.0.1). And I can ping to that address from both PCs. When I try to ping either of the PCs the pings time out. The subnets are also the same (255.255.255.0) and the IPs are in the same range (192.168.0.114 laptop, 192.168.0.205 desktop). So I don't really understand what I need to do to be able to access either computer from the other. The weird thing is that Synergy (to use mouse and keyboard over the network) works, just by using the IPs assigned to both PCs. The acces point is a linksys WAP54g, but I'm unsure of the Router, it has a custom casing from our ISP and hides any clues for identifying the product. I'm going to google a bit so I can add that info later. Both PC's are Windows 7 64 bit. The desktop is Ultimate, the laptop Professional.

    Read the article

  • Configuring WPA WiFi in Ubuntu 10.10

    - by sma
    Hello, I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

    Read the article

  • GPU hung when switching graphic card

    - by Lie Ryan
    I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

    Read the article

  • Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

    - by Matthew Carroll
    I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

    Read the article

  • Is the wireless driver from Live USB different from the standard install?

    - by Rafael Magalhães
    Linux newbie here. I've been trying to use Ubuntu (x64) as my main OS since 11.10, but my wireless connection on it has been very unstable, droping every other 5-10 mins. For this reason I see myself forced to use Windows 7 (dual booting), where connection works flawlessly -- which really bothers me. My card is an Atheros 9k, which claims a reasonable amount of wireless complaints on Ubuntu forums. I've tried every suggestion given on past questions to this site but to no avail. However, while running Ubuntu Live USB for some of the tests, I noticed that my wireless connection never failed on it and wondered if its network configuration differs from the one on the default Ubuntu install. If this is the case, how could I reproduce the Live USB network environment on my hard drive install?

    Read the article

  • My wireless/WiFi connection does not work. What can I do?

    - by Wild Man
    Your situation You have successfully installed Ubuntu. You have just downloaded and booted Ubuntu live media. The latest LTS (see also HWE) or latest non-LTS release are preferred. See the list of Ubuntu releases that are currently supported.) You upgraded your Ubuntu installation to the latest release that the software updater offered you. WiFi worked before, but not now on the new release. You migrated your existing Ubuntu installation to new hardware. Your problem The wireless of your laptop or dekstop is not working. You tried switching the wireless switch off and on and you tried rebooting several times, but you don't see any WiFi access points. You can see your wireless access point, but you cannot establish a connection. You want to analyze the problem, but you don't know where to start or what information you can provide. Related questions I have a hardware detection problem, what logs do I need to look into?

    Read the article

  • What software is responsible for connecting to the wireless net specified in /etc/network/interfaces?

    - by zuba
    I'm curious what software (package, utility in bin's) handle interface parameters in /etc/network/interfaces and decides to connect to the specified wireless net. I use wifi usb stick dlink DWL-110 attached to wlan0 with ndiswrapper driver. Sometimes wlan0 sees my wifi net - iwlist wlan0 scan shows it, but does not connect to it - iwconfig shows AP Not-Associated, until I replug the stick. Neither reinserting module with ndiswrapper, not ifdown/ifup or restarting networking helps. That is why I need to know what OS entity handles connection/reconnection to wireless net. EDIT: shame on me, I use wireless-tool package with wep encryption

    Read the article

  • A Single wireless network is not showing up in Ubuntu that used too, and other devices have no issue finding or connecting to it

    - by Kit Sunde
    Up until about a week ago I could connect to my wireless, but now I suddenly can't. Every other wireless in the area show up in the network manager. My kindle can connect to it, my friend can connect to it (in windows) without having connected to it before. My other netbook (Samsung NC10) can connect to it, but my other Samsung N150 now cannot even see it. I have tried deleting the old auto entry for it in the network manager Tried disabling and enabling both the networking and the wireless through the network indicator. Disabled the networking through the hardware shortkut key thing [fn] + [F9] Attempting to connect to it as if it was a hidden network. I'm at a loss, how would I go about debugging and unborking my computer?

    Read the article

  • 12.04: I need a new network card - and I think this one may work?

    - by Jason Malone
    I found this list of compatible USB wireless network adaptors: http://www.cyberciti.biz/tips/linux-usb-wireless-compatibility-adapter-list.html Listed here is the Belkin F5D8053. I'm looking for a store to buy a suitable adaptor in locally and I can't find that particular adaptor - but I can see a Belkin F7D4101az. I think this is simply a newer model - but a Google search for "ubuntu belkin f7d4101az" brings no results - not even people trying to get it to work. Nothing. So I didn't want to purchase it without being sure. There's really only one PC shop that sells this sort of stuff around here - so here's a list of all my available options: http://www.pcworld.co.uk/gbuk/wireless-cards-adapters/xx_7088_70095_xx_xx/xx-criteria.html I'd really like to get one today, because I have a lot of work to do and don't really want to have to wait a week for a new adaptor - I spent 6 or 7 hours last night trying to get my Dell 1450 to work with no luck. Any help would be much appreciated.

    Read the article

  • Script to connect to hidden wireless network with static IP?

    - by nLinked
    Would like a script, when run, it should connect to a hidden wireless network with these details: SSID is "Wireless" Network is not broadcasting its SSID above (is hidden) WPA2-PSK, AES, password is "password" Static IP: 192.168.1.1 Def. gateway: 192.168.1.254 DNS: 192.168.1.254 No idea how to do this. But I do know the wireless interface is called wlan0 and I'm on Ubuntu 10.10. I don't want to use the built in Network Manager as it never auto-connects on startup. WICD doesn't work either. Any ideas most welcome.

    Read the article

  • How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

    - by YumYumYum
    I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

    Read the article

  • Intel Core i7 clockspeeds

    - by skiwi
    I've got an Intel i7 3770 CPU and am generally quite happy about it. However when I am just browsing around without programs running in background it seems to underclock itself quite a lot. This is not a real issue, however there seems to be a small hiccup (0.1s maybe) when it clocks itself higher again. Does anyone have a similar issue? Can I change the thresholds that are being used to change the clocks? I absolutely like that it underclocks the CPU whenever I am not around, but it shouldn't start to annoy me. It might also be related to Windows 8.1, but I am not sure about that, just saying that it's a possibility. I ran LatencyMon as suggested and got this (worrying?) result:

    Read the article

  • No sound on Debian unstable Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller

    - by Dave Roger
    I have no sound on my Debian unstable. # cat /etc/issue Debian GNU/Linux squeeze/sid # lspci |grep -i audio 00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02) # lsmod | grep -i snd snd_hda_codec_realtek 235506 1 snd_hda_intel 19907 0 snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_pcm_oss 32591 0 snd_mixer_oss 12606 1 snd_pcm_oss snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_midi 4400 0 snd_rawmidi 15515 1 snd_seq_midi snd_seq_midi_event 4628 1 snd_seq_midi snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_timer 15582 2 snd_pcm,snd_seq snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq snd 46446 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm # cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.21. # uname -r 2.6.32-5-amd64

    Read the article

  • Programmatically get the WLAN config of a machine and use netsh to setup new profile

    - by Maestro1024
    How can I programmatically get the wireless LAN configuration of a machine and use netsh to setup new profile? I am having trouble getting the netsh command to set the ssid of a new card. I installed the drivers and plugged it in. I see in ipconfig it says the "media is disconnected" (fair enough). I then send the following command netsh wlan connect name=profile1 ssid=myNetwork interface="Wireless Network Connection 2" problem is I get an error "There is no profile "profile1" assigned to the specified interface. What is a profile for a wireless card? What should I set it to? How can I get my SSID set and connected for the card?

    Read the article

  • DHCP over WiFi on CentOS 6 [closed]

    - by dongle26
    Using CentOS 6 I cannot get my WiFi interface to configure over DHCP. Here is my ifcfg-wlan0: This does not work (although it is correct): DEVICE=wlan0 BOOTPROTO=dhcp ONBOOT=yes HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless This works: DEVICE=wlan0 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.253 NETMASK=255.255.255.0 DNS1=192.168.0.99 GATEWAY=192.168.0.99 HWADDR=xx:xx:xx:xx:xx:xx TYPE=Wireless I don't want a static IP address, I want a DHCP assigned address. Update: Both of the above configs are correct. Please don't downvote, this really didn't work for me. It must be a bug in CentOS or my wireless driver. See my answer for details.

    Read the article

  • IPs on home network

    - by windchime
    I have a Linksys router and a Belkin wireless router at home. The Linksys router is connected to cable modem and two computers, as well as to the Belkin wireless router. A 3rd computer is connected to the Belkin router through Wifi. The IP addresses of the computers connected to Linksys are 192.168.1.101 and 192.168.1.102. The IP address of the Linksys router on LAN is 192.168.1.1. The IP address of the Belkin wireless router is 192.168.2.1(based on the 3rd computer's routing table) and the IP address of the 3rd computer is 192.168.2.5. If I ping 192.168.1.101 from 192.168.2.5, all are well. However, if I ping 192.168.2.5 from 192.168.1.101, Destination Host Unreachable. Why?

    Read the article

  • My Intel Core i3 frequently shuts down due to "Processor Thermal Trip error"

    - by explorest
    My Desktop PC running Windows 7 on Intel Core i3 dual processor machine started shutting down during the boot process a couple of days ago. I left it alone for about 48 hours and tried again. The boot process informed me about Processor Thermal Trip as being the cause of boot failures and suggested a Windows recovery process. I went through the recovery process which completed without problems. The PC booted normally and Windows 7 worked as expected but after 10 minutes it again tripped and now whenever I start it, it shuts down during the boot process. What should I do next?... is there a boot menu / setup settings that needs to be adjusted to avoid it... Or is there a hardware problem (which seems unlikely as the machine occasionally boots perfectly )?

    Read the article

  • Intel turbo boost - in reality

    - by gisek
    I have an Intel i7-3630QM processor in my laptop. Its speed is supposed to be from 2.4 to 3.4 GHz in turbo boost mode. In reality, will it ever run all cores on full speed (3.4GHz mentioned above) at the same time? I heard somewhere that this additional 1GHz is shared between all cores in laptops. If the boost is 1GHz per core it's pretty impressive (over 40% speed up). What does it really look like? How long can a processor run in turbo mode?

    Read the article

  • Intel Rapid Storage Technology service always crashes

    - by Massimo
    I'm running Windows 7 x64 on a system based on an Asus Z87-Deluxe motherboard; the storage is configured for RAID mode; there is a single SSD drive for the O.S. and two 4-TB disks in a RAID 1 setup for the data. I've installed the latest version of Intel's Rapid Storage Technology drivers, 12.8.0.1016. The program complains about its service not being running, and the service is actually stopped; if I try to start it, it crashes. I've already tried reinstalling the package, but nothing changed. All the disks work correctly, but the RST program is unusable. How can I fix this?

    Read the article

  • Problem with bios update on Intel S3420GP

    - by wurlog
    I am using the Intel Develepment Assistant CD, but after choosing the newest update I can see a red text but just for a second. Afterwards it tells me to reboot, but it is still the same bios version as before. I can't find access the error message. The whole software seams to be a linux. Maybe I can access a console and look into the log files?? Or are there other solutions to update the bios? EDIT: I tried to download the bios/firmware update packages (using it via network share, because the usb stick wouldn't work), but the software wont use it.

    Read the article

  • Cannot increase my screen resolution

    - by Patrick Beardmore
    I am trying to install my new monitor but my Graphics Adapter (Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family) does not offer a resolution of 1920x1080 in the [Display Properties Settings] window. It only offers up to 1360x768. Can anyone explain to me how I can increase this number to the correct resolution. The monitor does show my the windows desktop, albeit at a lower resolution which is being stretched to fill the screen, making it look very blurry. I have installed the "Monitor Drivers" I found on the disk supplied with new monitor, but these do not appear to have made any difference. The Intel software that comes with the graphics card has an information window containing lots of info about the card and the monitor itself. I have placed this on a webpage so you can examine it if helpful. Many thanks with your help in getting my Christmas present to work! Patrick P.S.: Before I got this screen I checked to see if my graphics card could cope with such a large screen.

    Read the article

  • Intel VTune Performance Analyser 9.1 not working on Win 7 64

    - by ian
    Got the 32bit and 64 bit versions of the Intel VTune Performance Analyser. I installed the 64bit version (I think the installed was the "EMT" one) and when I go to create a new project, upon clicking the button to select an executable to profile, no file dialog popup shows. I got an old laptop and installed the 32bit on to Windows XP and it works fine. Regarding the 64 bit version, I did try changing the compatability to XP SP3 but it still didnt work. Does anyone know how to fix this?

    Read the article

  • Need a solution to stop students from rotating screen on laptops with intel graphics

    - by testguy
    We have some students who have figured out how to rotate the screen using either the hotkey combination or right click context menu. It's easy to fix but it's time consuming because no matter how many times I tell people how to fix it there's always someone that will come up to me. Now I need two things. First, is there a way to disable screen rotation? Second, I need a script to reset the screen resolution to normal on logon and logoff. The solutions need to be able to be deployed from a Win2003 server to WinXP clients. I have way too many computers to go through by hand to uncheck enable hot keys on the intel control panel.

    Read the article

  • INtel SSD RAID Trim

    - by Mike Pateras
    I just found this article, that says that Intel now supports Trim for SSD RAIDs. It links to this download page. I'm pretty excited about that, but I'm a little confused. There seem to be two sets of drivers, an executable and something that's bootable. I ran the executable. Is that just to apply the drivers to my system now, and are the bootable drivers so that if I re-format, I won't have to re-run everything? Do I need to do both? And is there a way to check if it worked? I'm running an i7 in Windows 7 (ASUS P6T Deluxe Motherboard), if that's significant.

    Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >