Search Results

Search found 1575 results on 63 pages for 'lts'.

Page 39/63 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• How to define default gateway with multiple DHCP interfaces?

  - by DrumEater

  How does ifconfig determine which network interface to use as the default when DHCP assigns a default route for each NIC? It seems like it's in a race-condition and I need to have a more reliable solution. Is there a setting in /etc/network/interfaces that could define the preferred gateway? I read about "metric" but that did not seem to function. 10.04 LTS Server with two NICs on a managed network. IP addresses are assigned via DHCP which I do not manage. eth0 is assigned a private NAT address; eth1 is assigned a public IP.

  Read the article

• Binding hotkey for toggling wireless card state - System76 Bonp3

  - by user109076

  Recently, my wireless card shut off on my laptop (System76 Bonp3 running Ubuntu 12.04 LTS). Awhile back, my keyboard had a meeting with a cup of coffee, and my F11 key no longer works. The key binding for turning my card back on happens to be Fn + F11, so I cannot turn my wifi on. The only solution I can think of is to somehow change this to be bound to another key. I'm looking for the script that handles this particular hardware switch so I can bind it elsewhere.

  Read the article

• Multiple network installs with cached downloads

  - by popey

  I tend to do lots of Ubuntu installs, and I'd like them to be up to date from the moment I do them, and not have to install a bazillion updates as soon as the install finishes. I'd also like to cache those packages somewhere on a machine on my LAN, so I don't re-download all the packages every time. How easy is this to achieve? Is there a guide somewhere to making this happen? Bonus points if I don't have to burn any CDs or use USB sticks! Edit: I have noticed a lot of guides for PXE booting and would be tempted to set this up but every time I find one they seem to be old/outdated and broken. My home server runs 10.04 LTS.

  Read the article

• Nvidia Powermizer Performance Levels

  - by jeffrey

  Is there anyway to configure Nvidia Powerimizer performance levels? My current setup has 3 power levels with the lowest one being 50mhz. The problem with this it that it lags compiz when it goes to the lowest performance level 0. Minimizing, maximizing, dragging windows, etc. are all sluggish when it's at the lowest level. Once powermizer leaves level 0 everything is very smooth and runs great. Is there anyway for me to remove level 0 and just run Level the two higher levels 1/2? I don't want to complete disable powermizer, but I can't stand the lagging once powermizer goes into performance level 0. Setting the option "prefer maximum performance" fixes the problem as it disables powermizer, but the GPU is overkill at stock speeds for most desktop use @ 850mhz. intel i5 2500k asus gene-z z68 evga 560ti fpb (driver 295.40) ubuntu 12.04 LTS x64

  Read the article

• Clicking on application launcher starts another window. What should I do?

  - by MMA

  If I remember correctly, clicking on the application in launcher started the application if it was not already open and focused on the application if it was already open. Previously, I had to middle click to start another instance. But, recently, whenever I click in the launcher, a new application window is started, irrespective of whether one is already open or not. What should I do? A bug? Or a new feature? I am using 12.04 LTS and 12.10 in two machines. Both fully updated. Both are showing the same behaviour.

  Read the article

• Why does Ubuntu Freezes on ASUS K42DY laptop with RADEON HD6470M Graphics Card?

  - by ix3

  Hi,I have an ASUS K42DY laptop with AMD Phenom II x2, 8 GB Ram , 500 GB Hard Drive and has a didicated ATI RADEON HD 6470M Graphics Card and I'm running Ubuntu 12.04 LTS 64bit on it. I have installed GNOME 3 and also followed this Make Ubuntu look like Mac OS X. I have also installed apps from the software center, getdeb & playdeb all of which worked fine. However, I noticed that Ubuntu freezes after inactivity let's say 1-3hrs. I have already set power setting to never standby or hibernate. This is completely annoying because all I can do is log-out via ctrl+alt+del or manually shut down and reboot my laptop. What should I do? By the way, this happens on all shells Unity, Gnome (even with the basic) and Cairo Dock.I set Swap Space at 8GB during installation. Any help will be appreciated. Thanks!

  Read the article

• Missing Firefox app icon

  - by frozenkoi

  I'm using Ubuntu 11.04 (upgraded from LTS 10.04) and Firefox (version 11) doesn't show it's icon in the Window List panel, in the Firefox window top left corner (system menu) nor when using ALT+TAB to switch applications. I'm using unity 2D since I'm running ubuntu as a guest in a VMWare virtual machine (Host is windows 7) Instead of the Firefox icon I get what appears to be a generic icon that looks like an app window in the window list and a black rectangle with a curl in the bottom right corner in the ALT+TAB window. How do I fix this so that the proper Firefox icon gets displayed? EDIT: Depending on the icon set chosen in the Appearence settings window sometimes I get the icon, sometimes I don't. When using Ubuntu classic none of the icon sets provide the icon for Firefox.

  Read the article

• Software install failure

  - by ilandroffshore

  I am getting a "Package Operations Failed" message at the 95% mark of each download. Details show "Reading database" for each 5 percentage segment until Reading database ... 95%dpkg: unrecoverable fatal error aborting: failed in buffer_read(fd): files list for package `gstreamer0.10-plugins-ugly' I have tried to download a number of piece of software (most recently PDF Editor) and am getting the same message at the same point in the download. Is there something wrong with my Ubuntu version, a virus or is it the software being downloaded? Using 10.04 LTS. P.S. Same problem when trying to download updates.

  Read the article

• Ubuntu won't boot on windows starter

  - by First timer

  I installed Ubuntu 12.04 LTS yesterday from a usb, but it only boots into Windows unless the usb is in, then it boots into the Ubuntu loader where I can choose Ubuntu vs. Windows. What's the problem? I run windows starter on a netbook with 1 gb ram and intel atom processor. I tried to install boot-repair but it won't work either. I follow the instructions for the Terminal and it seems to go right until I try launching it - then it says that it does not know the command boot-repair. I really like Ubuntu, it lets this netbook run smoothly and better than ever before but I don't think I want to boot from a usb every time.

  Read the article

• Couldnt find a way to open blender software

  - by sapphirebox001

  I am new to Ubuntu. I downloaded the latest version of Blender (2.70a) from official blender.org site as an tar.bz2 file. My Ubuntu OS is 14.04 LTS amd64 bit os, and I am sure that I have downloaded the correct version of blender. I have read that for security reasons, Ubuntu does not allow executing exe files. Since the downloaded package contains blender as an executable/x-executable type, it is not able to execute. I do not have an internet connection in that computer too. Also the "Allow executing file as program" checkbox is checked by default. Still double clicking it does not execute the file. Can anyone say how to open this file? P.S: Wine also checked but requires active internet connection, which I dont have.

  Read the article

• mysql questions for beginners

  - by ankhseeker

  ok, I have a few questions regarding mysql. I am currently running ubuntu 12.04.4 LTS command line version. I am looking for a database that I can use. I am confused at this point because I am uninformed. mysql is just one database that is on the server? or can it contain several or many databases What programs do I use to access it on the server or is it a vt-100 type access? I understand that mysql comes with lamp? or ubuntu. I am thinking that it is already installed but not sure how to access it, but that is another question for later. Outside of the man pages and the ubuntu manual, is there a site for its setup and use? Thanks!

  Read the article

• Unity does not load after update

  - by Kenpachi

  There is no unity dash or nothing after I updated my system last night. System Information : Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty Kernel Version : 3.13.0-27-generic And I have NVIDIA drivers 331.67 installed. I have also tried to fix this by following the advice from this post : Unity doesn't load, no Launcher, no Dash appears But no luck. In the CompizConfig Settings Manager, Ubuntu Unity Plugins is enabled, but no unity, even after a reboot. If there is a way to retrieve the list of packages which got updated the last time, please tell me so that I can post them here.

  Read the article

• get_hosts script being ignored in LTSP setup on Ubuntu 12.04

  - by Shwetav

  We had a home-grown LTSP load-balancer based on LDM_SERVER and get_hosts in Ubuntu 10.04. After upgrading to Ubuntu 12.04, everything worked fine except that get_hosts is being ignored completely. If we put space delimited list of servers as LDM_SERVER in lts.conf, users can choose a server during login and things work fine. Tried both locations below without any luck so far: 1. /var/lib/tftpboot/ltsp/i386/get_hosts 2. /opt/ltsp/i386/etc/get_hosts Any pointers would be greatly appreciated.

  Read the article

• GUI is not displayed anymore

  - by mdobrinin

  I am running 12.04 LTS on a VM. I encountered a problem with the screen being black and the familiar orange background showing for a fraction of a second when clicking or resizing the screen. I had to shutdown the machine and now I have no GUI. I only get a black command-line interface. As some other posts suggest, I attempted: sudo service lightdm restart This doesn't work for me because it gets stuck at this point: Skipping profile in /etc/apparmor.d/disable: user.bin.firefox Skipping profile in /etc/apparmor.d/disable: user.sbin.rsyslogd * Starting AppArmor profiles [ OK ] Any ideas?

  Read the article

• iptables rule problem

  - by thakrage

  I've been searching around for some time now, but nothing solves my problem. I'm setting up a mail server, but when writing to the iptables, I get an error: iptables-restore: line 2 failed. I'm tryig to use the following /etc/iptables.test.rules: # Allows SMTP access -A INPUT -p tcp --dport 25 -j ACCEPT # Allows pop and pops connections -A INPUT -p tcp --dport 110 -j ACCEPT -A INPUT -p tcp --dport 995 -j ACCEPT # Allows imap and imaps connections -A INPUT -p tcp --dport 143 -j ACCEPT -A INPUT -p tcp --dport 993 -j ACCEPT After this, I'm issuing the following command: sudo iptables-restore < /etc/iptables.test.rules However I get returned this: iptables-restore: line 2 failed. I don't know what the problem is. Can anyone clarify? btw. I'm using Ubuntu 10.10 LTS

  Read the article

• Sound issues in 14.4

  - by RMartinezG

  God Day. This is my first day with you people so please acept my apologies whether something is not good enough or my english is no that good. To the point ------------------------------------------ After upgrading from 13.10 to 14.4 my sound was lost. Even I've tryied several sugestions from you (and other helpers) I've got nothing. My dual (UBUNTU/WINDOWS) Desktop sound works fine in windows!!!(damm!!) my DELL Inspiration laptop sound works fine in UBUNTU 14.4 LTS. ¿?¿? Do anybody knows Which is actually the origin of the problem? Is there any solution diferent to assay-error metodology? Is'nt every newer version of UBUNTU enough double checked before releasing it? Thanks for youo help sudo apt-get install -a indulgence_with_me

  Read the article

• Xubuntu - Apps Become Unresponsive Intermittently

  - by Levinaris

  Possibly Relevant Information: XUbuntu 12.04 LTS (precise) XFCE 4.8 AMD Graphics (Kernel driver in use: fglrx_pci, Kernel modules: fglrx, radeon) The primary symptom of this issue has been my active rdesktop session to stop responding while everything else appears to work normally. I have been killing rdesktop and re-launching it, with it freezing after a seemingly random time period. The fastest was within seconds. The longest was a couple hours, although it's usually within a few minutes. That being said, I have occasionally seen the terminal and web browsers also become unresponsive to keyboard input. They respond to clicks and will accept middle clicks (to paste text) without issue while remaining unresponsive to the keyboard input. I have been able to restore all functionality, including rdesktop, by switching workspaces and typing on the other workspace, then returning to the original workspace. What is being reset when I do this? What does this work-around/solution indicate may be the problem?

  Read the article

• How can I paste text by pressing the left and right mouse buttons at the same time?

  - by Badministrator

  I am coming from Ubuntu 10. I just recently upgraded to 12.04 LTS. In 10, I use to be able to cut and paste from Terminal by selecting text, and just pressing my two mouse buttons. In 12.04, I can't seem to do this. I have to highlight text, then right click to copy, then right click to paste. Or, I can do ctrl-shift-c and ctrl-shift-v. Both are okay methods, but not as fast as before. How do I configure Ubuntu to preserve 'old-school' cut and paste?

  Read the article

• Torchlight is missing some textures

  - by AKAGoodGravy

  I am using a Radon HD6850 and just bought the indi bundle. Torchlight is missing all face textures (and face textures only). I have had problems with shaders before (graphic would be displayed as black), but what I am seeing now is a simple removal of the texture, I can see through the head. The fps is fine on full graphics so it doesn't seem to be too much of a driver issue (I am using the drivers that came with ubuntu). I downloaded the game through the USC. Has anyone had this issue and managed to fix it? Running Ubuntu 12.04 LTS

  Read the article

• USB audio device not detected [solved]

  - by user199052

  I've been having problems with USB sound for some time (it used to work about 6 months ago). I find that any USB sound device that I connect is not recognised, and is not listed by aplay -l I've tried disabling pulseaudio. I've tried purging and re-installing alsa-base, pulseaudio, and pavucontrol. To no avail. I'm using 12.04 LTS. I found the solution: 12.04 does not have the needed kernel module snd-usb-hiface this is introduced in the 3.11.1 kernel and installing that on 12.04 gives USB sound for my equipment. How to install the 3.11.1 kernel is given here:- installing 3.11.1 kernel

  Read the article

• Which version of Ubuntu is recommended for Samsung N270 notebook?

  - by Patu

  I have just installed 12.04 LTS 32bit because it was recommended but it seems slow, slightly slower than the EX family edition windows which came with the notebook and I used for 3 years.... so it makes me wonder if this is the correct version of Ubuntu for me. (or.. maybe I need to install the driver for my built in graphic card? or anything else.) specs: Samsung N270 notebook. Intel Atom cpu N270 @ 1.6GH X 2. 1GB RAM I am not sure the type of graphic card I just know that it is built in of Intel. Thank you guys for the help. Patu.

  Read the article

• Terminal echo issue

  - by user107602

  I've been using Ubuntu 10.04 LTS for a while, am quite new, using the terminal, made a script to open a project of mine containing multiple files with gedit - after execution of the respective script - gedit [filename1] [filename2] ... , terminal executes it successfully, gedit opens passed files and terminal is ready for another line. Well, today I came across a strange issue - after the execution of the above mentioned script, gedit initiates successfully, but terminal denies execution of commands and echoes all keyboard events, even specific ctrl+... functions - all until gedit is closed. I can't figure what caused this as my recent activity was focused around a C project, not regarding the terminal in any way. I recall being able to execute another line after initiating e.g. open gedit and compile a project within a single tab and session of a terminal window. Any help would be appreciated! Regards!

  Read the article

• Can't Reboot into Windows 8.1 from Ubuntu

  - by Extended Range

  I am newb in Ubuntu. Currently I am using an Acer V11 laptop with a pre-intalled Windows 8.1. I follow some guideline (http://www.everydaylinuxuser.com/2014/05/install-ubuntu-1404-alongside-windows.html) which successfully install Ubuntu 14.04 LTS alongside Windows 8.1 with UEFI enabled all the way throughout the installation and my current usage and a GRUB. But I got into some problem. The dual boot mostly works fine as I am able to successfully boot into either one of the Windows 8.1 or Ubuntu when stating my laptop. However it ran into issue after I start the device and use Ubuntu for a while (2 hour for instance) and then restart it: If I press the restart from Ubuntu, the grub still shows and I am still able to choose the Windows Boot Manager. But the Windows loading process was stuck at the Acer Loading Screen and I am not able to see the standard circular Win8 loading progress bar. Does someone know why would this happens?

  Read the article

• Wine doesn't work (Problem with the mount manager)

  - by audrianore

  I didn't know exactly when the problem occurred. My Wine worked well a couple days ago. Then, I was just about to install some Windows programs hours ago but I got nothing. No installer window showed up, and no error report. It just won't work. And now I just found where the problem is (screenshot below), but I don't know how to fix it. Any idea? Any help would be appreciated. Thanks in advance. Details: Wine 1.4 Ubuntu 12.04 LTS I tried: Autoremove in Terminal Delete the software configuration

  Read the article

• Ubuntu will not install on my Dell Inspiron 580

  - by AndrewC

  I'm trying to install ubuntu on my Inspiron 580 (Intel Core i3 4Gb Ram Intel HD Graphics) but am having no success installing from CD or Windows installer all result in a purple rapidly flashing screen with the Ubuntu with 5 dots below it splash which doesn't change. I have tried releases 12.04.1 LTS (CD and windows installer), 11.10 (CD after reading it was certified for the 580) and today 12.10 (CD) all produce the same install failure. My Dell 1704PT monitor is connected to the intel HD board using an HDMI to DVI adaptor though I have tried a VGA cable and still got the same flashing screen. Any help gratefully received as i want to get away from Windows 7 Home Premium.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >