Search Results

Search found 1261 results on 51 pages for 'mask'.

Page 39/51 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Linux on Sony Vaio VPCEB1S1E

  - by Jaakko

  I bought Sony Vaio VPCEB1S1E and I was able to surf on net. Then I tried to install Ubuntu 9.04 and Linux Mint on it but neither allows me an access to the Internet. How can I configure Mint so that I can go to net and get updates via apt-get? jaakko@jaakko-laptop ~ $ ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 46:83:d4:f4:36:bc BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 78:dd:08:c5:61:88 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster0 Link encap:UNSPEC HWaddr 78-DD-08-C5-61-88-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) jaakko@jaakko-laptop ~ $ ping 8.8.8.8 connect: Network is unreachable

  Read the article

• Persistent static route stops working after VPN drops and reconnects

  - by user76157

  I've got a VPN between two networks, one home and one office (A and B). Their subnets are: (A) 192.168.1.0 and (B) 192.168.0.0 The two networks have identical ADSL routers. Unfortunately these can only do dial-out VPN. So I've got a Windows 2008 server on Network B acting as a VPN server (ServerB). Network A's router (RouterA) passes through Network B's router and connects via PPTP to ServerB. RouterA is assigned the static IP 192.168.0.40 on Network B. There's a persistent static route on ServerB telling it to use 0.40 for all requests to Network A's subnet, 192.168.1.0. (route -p add 192.168.1.0 mask 255.255.255.0 192.168.0.40). This enables ServerB to ping all machines on A (and those machines to ping ServerB). The VPN connection occasionally drops (I'm not sure why - it's set to remain always on and seems to drop randomly). This wouldn't be too much of a problem, as it reconnects automatically and quickly, except that when it does reconnect, the static route on ServerB no longer works. Route print (on ServerB) shows that the persistent static route still exists. However a tracert to a machine on Network A doesn't use the static route; it tries instead to use ServerB's default gateway (which is RouterB), and fails to find the machine. Deleting and re-adding the static route fixes the problem - a tracert uses the static route. At the moment, a batch file to delete and re-add the static route is scheduled to run every day. But this is clearly far from an ideal solution! I hope that's not too confusing. Any help would be very much appreciated.

  Read the article

• Internal but no external Citrix Access?

  - by leeand00

  We recently had to reload our configuration of Citrix on our server Server1, and since we have, we can access Citrix internally, but not externally. Normally we access Citrix from http://remote.xyz.org/Citrix/XenApp but since the configuration was reloaded we are met with a Service Unavailable message. Internally accessing the Citrix web application from http://localhost/Citrix/XenApp/ on Server1 we are able to access the web application. And also from machines on our local network using http://Server1/Citrix/XenApp/. I have gone into the Citrix Access Management Console and from the tree pane on the left clicked on Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/PNAgent Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/XenApp, which in both cases displays a screen that reads Secure client access. Here it offers me several options: Direct, Alternate, Translated, Gateway Direct, Gateway Alternate, Gateway Translated. I know that I can change the method of use by clicking Manage secure client access->Edit secure client access settings which opens a window that reads "Specify Access Methods", and below that reads "Specify details of the DMZ settings, including IP address, mask, and associated access method", I don't know what the original settings were, and I also don't know how our DMZ is configured so that I can specify the correct settings, to give access to our external users on the http://remote.xyz.org/Citrix/XenApp site. We have a vendor who setup our DMZ and does not allow us access to the gateway to see these settings. What sorts of questions should I ask them to restore remote access?

  Read the article

• InterVLAN routing on a HP V1910 series switch

  - by tintix

  Recently bought a HP V1910-16G switch (former 3com 29??) with IPv4 routing capabilities. After unpacking I did a firmware upgrade to the latest 5.20 Release 1513P06. I did set up additional VLANs (#2 and #3) and VLAN interfaces for those. The problem is that connected PCs on different VLAN's can't ping each other. Looks like VLAN routing doesn't even work. So here's my setup: VLAN ID VLAN interface 1 10.0.0.21/24 2 10.0.5.1/24 3 10.0.6.1/24 Have one PC connected to VLAN 2 (IP address 10.0.5.2, default gateway 10.0.5.1) and a second PC connected to VLAN 3 (IP address 10.0.6.2, default gateway 10.0.6.1) Routing table: Destination IP Mask Next Hop 0.0.0.0 0.0.0.0 10.0.0.1 10.0.0.0 255.255.255.0 10.0.0.21 10.0.0.21 255.255.255.255 127.0.0.1 10.0.5.0 255.255.255.0 10.0.5.1 10.0.5.1 255.255.255.255 127.0.0.1 10.0.6.0 255.255.255.0 10.0.6.1 10.0.6.1 255.255.255.255 127.0.0.1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 255.255.255.255 127.0.0.1 The first PC can't ping the second PC one and vice versa. They only can ping their own gateways and that's all. What I'm doing wrong?

  Read the article

• Weird permission issue with POSIX ACLs, NFS v3 on Linux

  - by jon

  I have two Linux systems, both running Debian Squeeze. Versions of (I think) the stuff involved are: kernel: 2.6.32-5-xen-amd64 ii nfs-kernel-server 1:1.2.2-4squeeze2 support for NFS kernel server ii libnfsidmap2 0.23-2 An nfs idmapping library ii nfs-common 1:1.2.2-4squeeze2 NFS support files common to client and server ii portmap 6.0.0-2 RPC port mapper (The client doesn't have nfs-kernel-server involved.) I have a directory with ACLs: # file: dirname # owner: jon # group: foogroup # flags: -s- user::rwx user:www-data:rwx group::r-x group:foogroup:rwx mask::rwx other::r-x default:... There are two users, neither one of which owns the directory: uid=3001(jake) gid=3001(jake) groups=3001(jake),104(wheel),3999(foogroup) uid=3005(nic) gid=3005(nic) groups=3005(nic),3999(foogroup) The jake user can create files in the directory without issues. The nic user can't. All UIDs/GIDs are the same on the client and server. I've verified (packet sniffing) that the right uids/gids get sent via AUTH_UNIX are correct-- uid=gid=3005, auxiliary gids=3005,3999-- and that the server replies with NFS3ERR_ACCESS, which the kernel on the client maps to EACCES (Permission denied). Can anyone help me here?

  Read the article

• Gentoo Linux useful utilities

  - by Alakdae

  I want to make a list of utilities that come in handy in Gentoo (general Linux tools available in all distributions also appreciated). What tools and commands do you use and consider helpful in administration of a Gentoo server? I will update the list with command from answers from time to time. eclean Utility for cleaning distfiles and binary packages. Usage example: eclean distfiles Usage example output: Cleans out the files in /usr/portage/distfiles. Pretty handy. Package: app-portage/gentoolkit eix Very useful tool for getting information about a package. Similar to "emerge -s" but much faster and more precise. Usage example: eix gentoolkit Usage example output: Show information about package such as: available versions, masked versions, installed versions and description. Package: app-portage/eix eix-test-obsolete Check system for obsolete, redundant, uninstalled entries in package.keywords, package.mask, package.unmask, package.use and package.cflags Usage example: eix-test-obsolete Usage example output: Shows non-matching entries, redundant entries, and uninstalled entries. Package: app-portage/eix equery Another very useful tool for getting information about packages (listing package files, checking which files belong to which package and much more) Usage example: equery b emerge Usage example output: Show which packages installed a file called emerge Package: app-portage/gentoolkit genlop Utility for extracting information about emerged ebuilds Usage example: genlop -l --date yesterday Usage example output: Show a list of packages that have been emerged yesterdayPackage: app-portage/genlop glsa-check Checks system if it's affected by GLSAs (security issues) Usage example: glsa-check -l affected Usage example output: List of GLSA that the system is affected by. Package: app-portage/gentoolkit rc-update Utility for managing (adding, deleting) runlevel scripts. Usage example: rc-update add syslog-ng default Usage example output: Adds syslog-ng to default runlevel. Package: sys-apps/baselayout revdep-rebuild Scans libraries and binaries for missing shared library dependencies Usage example: revdep-rebuild Usage example output: Gather binaries and libraries information, check for dependencies, rebuild packages with missing dependencies Package: app-portage/gentoolkit

  Read the article

• Samba Share - MS Excel when saved (can't access the file, there are several possible reasons)

  - by brain90

  Dear Fellow ServerFaulter, I have a weird problem in my samba share. I have one share definition for 3 client (A,B,C) This share contain some excel file which having a lot of formula and linked each other. Client A access the file with libre office (ubuntu), client B access with WinXP & MS Office 2003, The write and read process working successfuly on Both of them. The problem occur when client C accessing the same file with MS Excel 2003 (windows xp). This messagebox appear when he saving the file : Microsoft office excel cannot access the \\192.168.1.23\myshare\ There are several possible reasons: - The File ort path does not exist The file is being used by another program. - The workbook you are trying to save has the same name as a - Currently open workbooks. I was trying http://support.microsoft.com/kb/291204 but it didnt work. Below is my share definition : [brainshare] comment = brainshare path = /opt/brainshare/ valid users = @brainshare force group = brainshare read only = No create mask = 0775 veto files = /*.scr/*.eml/thumbs.com/ Help me please... Thanks in advance ! Server: Ubuntu 10.10, Samba version 3.5.4

  Read the article

• why adding router will hide all share folders

  - by user1285419

  I have several computers running winxp installed in my office, they are all connecting to the WAN providing by the building (wall socket) (DHCP, mask 255.255.252.0). I setup a shared folder in my computer so all other computer in the same group could access it. This configuration have been using for long time. Recently, I am trying to setup a router. I have the WAN port of the router go to the wall socket, connect the NIC to the LAN port of the router, setup the router in DHCP mode (192.168.0.100/255.255.255.0 to 192.168.0.110 /255.255.255.0), I turn off all the firewall (windows one and router's builtin one), the NIC has ip set as DHCP. If I ipconfig/all, I see that the NIC was assigned ip 192.168.0.100. I can access the internal, email whatever. However, the shared folder can no longer be accessed by other computers in the same group. I think it is the problem of ip. But what's really weird is if I turn off the DHCP function in the router, ipconfig/all always give 0.0.0.0/255.255.255.255 and I cannot access the internet. I have no idea what's going on. Anyone know how to fix it and allow the shared folder in application of router? Thanks.

  Read the article

• Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

  - by Starchy

  I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

  Read the article

• Windows 2008 R2 forgets static IP configuration after reboot

  - by Andrew

  I've got an issue where a Windows 2008 R2 Standard (SP1) server loses its static IP configuration upon a reboot. It's a sysprep'd image. The following steps reproduces the problem: Using the SAC, set the IP using 'i' Use the Win32 EnableStatic() method to set an IP (and then SetGateways()) through PowerShell Reboot The machine boots up with the following configuration: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : [...] Autoconfiguration IPv4 Address. . : 169.254.152.31 (incorrect) Subnet Mask . . . . . . . . . . . : 255.255.0.0 (incorrect, was set to /24) Default Gateway . . . . . . . . . : 1.1.1.1 (correct) Occasionally, the gateway is also incorrect (0.0.0.0) The images have a script that runs 'netsh int ip reset' after sysprep finishes (before the reboot), so it appears that does not solve the issue. (the problem also happens without this step) After the reboot, using 'i' on the SAC resolves the issue permanently. (But I'd like to know the root cause as having to run 'i' again isn't ideal)

  Read the article

• Which IP should I use for my nameserver

  - by Luke Bream

  Sorry to ask whats probably very obvious question. I have just got a new server that is fantastically cheap but unfortunatly doesnt come with any technical support and Im very out of my depth ! My hosting company has provided the following information... Below you will find your additional IP addresses added to the server 5.9.36.51 Please note that you can use the subnet only for this server. IP: 5.9.225.64 /27 Mask: 255.255.255.224 Broadcast: 5.9.225.95 Useable IP addresses: 5.9.225.65 to 5.9.225.94 It has cPanel with WHM and im going through the setup... I have a number of questions... my domian is purchased from godaddy and I want to use it as the name server. Question 1: Which IP or IP's do I enter into the godaddy interface for ns1.mydomian.com ns2.mydomain.com Question 2: In the WHM nameserver setup what do I enter for... Please enter an IP address for each of your nameservers. ns1.mydomain.com ?????? ns2.mydomain.com ?????? Add "A Entries" for Hostname IP for Entry: ????????? Thanks for aany help you can give Luke

  Read the article

• Having trouble setting up my router

  - by indyK1ng

  I just moved into my apartment and the Internet connection is working. It's Comcast in case that matters. Anyway, I'm having trouble setting up my wireless router (Netgear WNR2000) to work with it. Are there any settings that I could be missing? I currently have it set up to use a static IP address and I found the DNS servers I'm supposed to use and the Internet light is green, but I can't get out to the Internet. When I am trying, I'm connecting to an Ethernet port on the back of my router. Is there a setting I'm missing or a setting that I have set wrong? I used the automatic set up wizard to learn that it's a static IP address. Any help would be appreciated. I am currently only able to use my Linux machine, so please make any help in Linux commands. Yes, I can connect to the Internet if I connect to the modem directly and I've been using the web interface when I'm connected to the router, so I suppose I can ping the router. My router detected the connection as using a static IP address, so I connected to the modem directly and figured out what my IP address, gateway, and mask were as well as DNS servers.

  Read the article

• HP Procurve 2610 intervlan routing

  - by user19039

  Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

  Read the article

• Separate computers in my apartment can't communicate to each other?

  - by Razor Storm

  In my apartment, the management provides the building with a network connection. I have my computer plugged into the ethernet coming out of the walls, and my friend who also lives in the apartment building has his computer connected to a separate ethernet jack. As far as I know our two computers are not within a LAN, and ipconfig shows that we only have external ip addresses. The problem, then, appears when we attempt make direct communication between our computers. I have some hosting server set up on my machine, and my friend is unable to connect to it via my ip address. Other people who do not live in the apartment can connect fine. Ethernet adapter Local Area Connection: IPv4 Address. . . . . . . . . . . : 204.29.113.41 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : 204.29.112.1 His ip: 204.29.113.104 Using a fulltunnel vpn doesn't help.

  Read the article

• Using "route add" to tell my computer to use a direct ethernet connexion instead of wifi ?

  - by TheSamFrom1984

  2 PCs are involved. Both are connected to the internet via Wifi on the same router. I can ping to/from each other and share folders flawlessly, but I'd like to be able to set a direct Ethernet link between them to speed up file transfers AND keep the Wifi connections (no gateway). So I plugged my RJ45 cable, and set up the connection. It works, but the PCs are only using this connection if one of them if disconnected from the Wifi. PC1 local address is 192.168.0.7 on its ethernet interface, and 192.168.1.21 on the wifi one. PC2 local address is 192.168.0.6 on its ethernet interface, and 192.168.1.22 on the wifi one. My question is : I'd like to using the route add command to tell PC1 to use the Ethernet interface when it needs to connect with PC2, by specifying "IF 2" at the end of the route add command. How can I do this ? I don't know what to put in the "gateway" parameter of the command, and everything I tried returns "the parameter is incorrect" (i don't know which one). ipconfig /all on PC1 : Windows IP Configuration Host Name . . . . . . . . . . . . : Sam-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : NETGEAR WG111v3 54Mbps Wireless USB 2.0 Adapter Physical Address. . . . . . . . . : 00-22-3F-DA-51-56 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::1d33:60b:476c:d396%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.21(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : vendredi 27 novembre 2009 15:38:48 Lease Expires . . . . . . . . . . : dimanche 29 novembre 2009 07:33:04 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 301998655 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1A-4D-59-B2-71 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f598:c3a0:df8d:706e%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234887757 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-7E-58-EA-00-1A-4D-59-B2-71 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled

  Read the article

• Basic OpenVPN setup

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You

  Read the article

• NFS high CPU usage

  - by user269836

  Hello, I have a very strange issue. I have next server: Intel(R) Xeon(TM) MP CPU 3.16GHz cat /proc/cpuinfo | grep proce | wc -l 8 free -m total used free shared buffers cached Mem: 28203 27606 596 0 10789 9714 -/+ buffers/cache: 7103 21100 Swap: 24695 0 24695 RAID card *-storage description: RAID bus controller product: MegaRAID vendor: LSI Logic / Symbios Logic physical id: 7 bus info: pci@0000:13:07.0 logical name: scsi2 version: 01 width: 32 bits clock: 66MHz capabilities: storage pm bus_master cap_list rom configuration: driver=megaraid latency=32 resources: irq:134 memory:d8ff0000-d8ffffff(prefetchable) memory:df600000-df60ffff(prefetchable) HDD: 10x148Gb SCSI U320 15k - RAID5 /dev/sdb1 807G 674G 93G 88% /storage /dev/sdb1 /storage ext4 defaults,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,noatime,nodiratime,noacl,errors=remount-ro 0 1 network cards ethtool -i eth0 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ethtool -i eth1 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ifconfig bond0 Link encap:Ethernet HWaddr 00:0f:1f:ff:d6:4d inet addr:192.168.15.71 Bcast:192.168.15.255 Mask:255.255.255.0 inet6 addr: fe80::20f:1fff:feff:d64d/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:1062818202 errors:0 dropped:3918 overruns:0 frame:0 TX packets:1041317321 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10000 RX bytes:258867684559 (241.0 GiB) TX bytes:396569192650 (369.3 GiB) this server running only nfs-kernel-server uname -a Linux nas2-backup 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux Debian 6. What do I have, once per day or two, LA goes up, it can be reached around LA: 40 but if I do: nfs-kernel-server restart. Every thing is OK. But on the next day or a little bit later, LA goes up again. Servers are connected to d-link dgs 1016d with 24 GBits ports. I have tried everything to find out what the problem is. Why it's happening, but still I can not resolve this issue. Any ideas on what is happening here?

  Read the article

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• SCM8014 to FVS338

  - by Jack

  I have a SMC8014 Router/Modem that Comcast provided me with their business class service. It was not filtering malicious traffic as aggressively as I had hoped, so I purchased a NetGear ProSafe FVS338, and put this behind the SMC8014, and all my machines behind that. After some brief configuration, all machines can see out to the internet. I also have a single web server, and I have not been able to configure things so that incoming requests can reach it. This is where I need help! I would like to have the FVS339 do NAT, so that I can assign a 192.168 address to my webserver. I've tried everything I know of, and I can't get things going. I set the SMC8014 to have a LAN facing IP of 10.0.0.1, and I assigned the FVS339 a WAN facing IP of 10.0.0.2. I would like to be able to tell the SMC8014 to just forward all traffic to 10.0.0.2, but I haven't had any success. In my (unfortunately limited) understanding, what I probably want here is a static route, but I don't know how to cofigure one, or if this is really what I want. The SMC8014 wants a Destination IP, a Subnet Mask and a Gateway IP. Any help would be appreciated.

  Read the article

• What's the state of the art in image upscaling?

  - by monov

  I like to collect cool pics and use them as wallpapers or for other things. Often, artists publish only low-res versions, probably for fear of theft. Example: Gabriel Pulecio's BIRDS Now, if I want to use that as a wallpaper, I'd have to upscale it, and obviously that'd make it look blurry because of the bicubic interpolation. I realize there's no real way to get a high-res version from a low-res pic, because the information is not simply there. That said, I'm wondering if heuristics have been developed for upscaling with less apparent loss of quality. Those would probably be optimized for specific image types. For photorealistic pictures, for cartoons with large flat areas, for pixel art... One algorithm I'm aware of is Seam Carving. It works for some kinds of pics, especially ones with a plain, undetailed or uninteresting background, and a subject that strongly stands out. But it's far from being general-purpose. Applying it to the above pic produces this. It looks quite sharp, but the proportions are horribly distorted because the algorithm is not designed for this kind of pic. Another is Pixel art scaling algorithms. Those are completely unfit for anything other than actual pixel art that's pixelized to begin with. For example, I tried the scale2x windows binary on my pic, but its output was nearly indistinguishable from nearest-neighbour scaling because the algorithm didn't detect any isolated pixely fragments to work from. Something else I tried was: I enlarged the image in Photoshop with bicubic interpolation, then I applied unsharp mask. The result looks pretty bad. The red blotch is actually resized reasonably well, but the dove is far from it. What I'm looking for is some app that makes a best-effort attempt at upscaling any input image while minimizing blurriness. If you know of any, I'll be thankful. Note that the subjective prettiness and sharpness of the result is what matters... the result doesn't need to be completely faithful to the original small image.

  Read the article

• Adding a Second Wireless Router to an Existing Wired Network

  - by KVCrawford

  I apologize ahead of time, I know this has been asked before, but I'm still having problems...maybe you guys can help. I started out with the basic instructions from the highest-voted answer at http://serverfault.com/questions/41572/adding-a-second-wireless-router-to-my-network The new Wireless router in question is a Linksys Wireless-N Gigabit Router, Model # WRT310N Here are the steps I've taken in setting it up: Plug my laptop into LAN port #2 in the new router. Nothing else is connected at this point Configure the new router to be 192.168.1.200 (the original router is 192.168.1.1, and its DHCP clients are from 192.168.1.100-x.x.x.199) Set the internet connection on the new router to "DHCP Client" Turn off the DHCP server & NAT routing on the new router Plug in a LAN cable from the original router into the LAN port #1 on the new router (NOT the WAN port, nothing is plugged in there) Reset the new router Afterwards, I try to ping 192.168.1.1 from the laptop plugged into LAN port #2 on the new router, with no response. 192.168.1.200 garners no response either. Typing "ipconfig" tells me: Autoconfiguration IP Address: 169.254.198.113 Subnet Mask: 255.255.0.0 Default Gateway: 169.254.198.113 What's going wrong? I appreciate any help!

  Read the article

• Routing for Two Hosts Behind a IPSec Tunnel

  - by Brent

  Network A 10.110.15.0/24 Firewall is .1 Host A is .2 Network B 10.110.16.0/24 Firewall is .1 Host B is .2 Two Cisco ASA's. IPSec tunnel with a crypo map that secures 10.110.15.0/24 <- 10.110.16.0/24. Let's say two hosts, 10.110.15.2 and 10.110.16.2 need to talk to each other. Normally I have to enter a persistent static route on a each host along the lines of: route add 10.110.16.0 mask 255.255.255.0 10.110.15.1 metric 1 -p (on the "A" box) I also have to enter another persistent static route on the .16 host in order for the traffic to know how to get back to the .15 network. Note that the default for each machine IS the firewall, so .1. I have no problem adding persistent routes on Windows/ESX/*nux machines but what about a smart switch in the .16 network that I want to manage from the .15 network. Do I need to run a routing protocol? Do I need to have Reverse Route Injection enabled on both ends of the IPSec tunnel? Should I add a route on the firewall? If so, how do you formulate it? Does it get a metric of 1 and my default route 0.0.0.0 get a metric of 2?

  Read the article

• Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

  - by Damainman

  I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

  Read the article

• Cisco router not receiving OSPF updates

  - by WebDevHobo

  Or at least, that's what I think is happening. There doesn't appear to be a debug command for this, or to see if something is in the routing table. I'm testing out this setup in Packet Tracer. I have 3 routers and a webserver From left to right, you have: Webserver - Router1 - Router2 - Router3 Router1 and Router2 can succesfully ping WebServer. Router3 cannot. Router2 has a default gateway set, to send all not-recognized data through its serial interface to Router1. Like this: ip route 0.0.0.0 0.0.0.0 Serial 0/0/1 Serial 0/0/1 being the connection to Router1 Router2 and Router3 have OSPF configured. From their "show run": Router2: router ospf 1 log-adjacency-changes passive-interface Serial0/0/1 network 10.1.1.0 0.0.0.3 area 0 default-information originate ! Router3: router ospf 1 log-adjacency-changes network 10.1.1.0 0.0.0.3 area 0 passive-interface FastEthernet0/0 ! I was under the assumption that setting default-information originate on Router2 would give Router3 the needed information. What's going wrong here? The interfaces are up. Ip addresses are with mask-range, clock rate is set at correct end. I don't know what else to check.

  Read the article

• NTOP gives warnings on startup

  - by FR6

  I just installed ntop 1.4.4 and when I start it, it give me infinite warnings "packet truncated": ... RRD_DEBUG: umask 0066 RRD_DEBUG: DirPerms 0700 THREADMGMT: RRD: Started thread (t2992630672) for data collection THREADMGMT[t2992630672]: RRD: Data collection thread starting [p30923] INIT: Created pid file (/var/run/ntop.pid) THREADMGMT[t3086329552]: ntop RUNSTATE: INITNONROOT(3) Now running as requested user 'nobody' (99:99) Note: Reporting device initally set to 0 [eth0] (merged) THREADMGMT[t3086329552]: ntop RUNSTATE: RUN(4) THREADMGMT[t2982140816]: NPS(1): Started thread for network packet sniffing [eth0] THREADMGMT[t2982140816]: NPS(eth0): pcapDispatch thread starting [p30923] THREADMGMT[t2982140816]: NPS(eth0): pcapDispatch thread running [p30923] THREADMGMT[t3047009168]: SIH: Idle host scan thread running [p30923] THREADMGMT[t3057499024]: SFP: Fingerprint scan thread running [p30923] **WARNING** packet truncated (8814->8232) **WARNING** packet truncated (10274->8232) **WARNING** packet truncated (8814->8232) **WARNING** packet truncated (8814->8232) ... Do I need to configure something? I tried to access the web interface (http://localhost:3000) but it does not work. Note: I'm on CentOS. EDIT: Not sure if it helps but there is my "ifconfig": eth0 Link encap:Ethernet HWaddr 00:16:76:BC:7E:77 inet addr:192.168.0.221 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::216:76ff:febc:7e77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15496640 errors:0 dropped:0 overruns:0 frame:0 TX packets:19256813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:836230629 (797.4 MiB) TX bytes:608496148 (580.3 MiB) Memory:dffe0000-e0000000

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >