Search Results

Search found 13145 results on 526 pages for 'print drivers'.

Page 39/526 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Misbehaving Network Printers - options?

  - by Dan Kelly

  We are having some issue with printers on our network. We have 3 floors, 2 printers per floor (A3 & A4) all connected to the same Print Server. The issue is that the same printer may not behave the same on two different, seemingly identical desktops. The commonest place this is seen on our bulk print script in AutoCAD - occasionally drawings may print Landscape on Portrait paper, despite drawings always being Landscape... Does any one have any suggestions on what we can check / try? The current line of attack is to setup a new Print Server, with the HP universal print driver rather than the device specific drivers, and replace printers using exactly the same method on all desktops. Sound good?

  Read the article

• Why can I not print from Google Chrome?

  - by David Faux

  When I try to print any page from Chrome on my Windows 7 machine, I get the following message. click to enlarge By the way, the gray text in the middle reads Google Chrome cannot show the print preview when the built-in PDF viewer is disabled. In order to see the preview please visit chrome//plugins/, enable the Chrome PDF Viewer, and try again. When I check my plugins, I find that Chrome PDF Viewer is already enabled. Why can't I print?

  Read the article

• Cannot print to XPS Document Writer

  - by slolife

  I have windows 7 and I was trying to print a webpage to the "Microsoft XPS document writer", but it keeps says "An error occurred try to print the document". I've looked in the event viewer and don't see any errors. What can I do to get it to print or figure out what is wrong?

  Read the article

• Print Wirelessly from the iPhone [migrated]

  - by Lynda

  I am looking to purchase a printer and before anyone votes to close I am not asking for recommendations. Here is my question I would like to have a printer that I can print to directly from my iPhone. When I google "air print" (based off of what the iPhone says) I see HP Wireless Printers. That leads me to the question can I use the iPhone to print on any printer with wireless capabilities or does it have to be one of these HP Printers with "ePrint"?

  Read the article

• Print Managment

  - by nardone25

  Hello everyone, I am having a ID10T error LOL,. First I am using window server 2003 r2 edition. I installed on a domian controller print managment. So this is where all 48 printers I have are installed. I just got a new printer. I gave it an IP for the machine and when I head into the server room i tried to add it to the server. I can print a test page, when I am logged on to the print server, but on my client computer when he goes to add a printer in window xp pro the printer isn't listed in add print for network. What did I do wrong?

  Read the article

• Acrobat Reader, and indeed all Adobe products are freezing and crashing on print

  - by 5tratus

  Everything was working fine, right up till I had to do some driver work to get my scanner to work - now I can't seem to print from any Adobe product. I click print and the program freezes, it stops responding, and in the case of Acrobat Reader, it crashes. In the case of In-design CS4, I have to stop the process in task manager, in the case of Fireworks CS3 - I think it just crashes. Printing a PDF hangs and crashes inside of Firefox and IE browsers too. My printer works and I can print from MS Word, Excel and directly by right clicking on a non-Adobe file and choosing print. But when I try it in an Adobe product. I'm running Windows 7 64-bit, my version of Adobe Reader is: 10.1.11, Windows is updated, and I don't have any unusual extensions.

  Read the article

• Web to Print system - which client side technology should I use

  - by mr null

  I'm getting started to develop Web to Print system. My main concern is which client-side techology should I use: jQuery/CSS Flex/ActionScript or something else? For now, idea is that user/customer choose Product eg: Business card Attributes: Dimensions,Paper type, ... etc Template or blank Adjust product (editor) Preview & order Output should be PDF 300dpi. My main issue is: adding/adjusting text in editor. (font size, font family...). Because application should be cross browser. And I think that 10px Arial can't be the same in Firefox 5 and IE 8. It must be pixel perfect in every browser. If somebody order $100 of business cards, and text is different that he/she saw when ordering - that is a big problem. So, Flash platform should be the answer. But, as I see it's dying technology, 2012 is here - HTML5 is replacing Flash rapidly. I hope that you understand me, so every guideline or few smart words would be very appreciating.

  Read the article

• SQL SERVER – Puzzle to Win Print Book and Free 30 Days Online Training Material

  - by pinaldave

  Yesterday I had asked a simple question SQL SERVER – Puzzle to Win Print Book – Write T-SQL Self Join Without Using LEAD and LAG with keeping two simple intention. We can all learn about new feature of SQL Server 2012 We can learn new feature of SQL Server 2012 while practicing on earlier version of SQL Server. While I was creating question due to copy-paste error the question was not correctly created. In simple word – I made a mistake. This created some confusion and I feel bad about this. Here is what we will do. Please read the question again and attempt to answer the question which I have asked in the blog post. Yesterday the give away was my SQL Server Interview Questions and Answers book. As the question was corrected after a while, the give away are now got sweeter. SQL Server Interview Questions and Answers book – 2 Copy 30 Days Online Training Material of Pluralsight. They have excellent learning resources – I have written my 6 hour learning experience over Learning SSAS (SQL Server Analysis Services) Online in 6 Hours. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLServer, T SQL, Technology

  Read the article

• Canon MG6100 series USB printer receives job but doesn't physically print

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• SQL SERVER – Puzzle to Win Print Book – Explain Value of PERCENTILE_CONT() Using Simple Example

  - by pinaldave

  From last several days I am working on various Denali Analytical functions and it is indeed really fun to refresh the concept which I studied in the school. Earlier I wrote article where I explained how we can use PERCENTILE_CONT() to find median over here SQL SERVER – Introduction to PERCENTILE_CONT() – Analytic Functions Introduced in SQL Server 2012. Today I am going to ask question based on the same blog post. Again just like last time the intention of this puzzle is as following: Learn new concept of SQL Server 2012 Learn new concept of SQL Server 2012 even if you are on earlier version of SQL Server. On another note, SQL Server 2012 RC0 has been announced and available to download SQL SERVER – 2012 RC0 Various Resources and Downloads. Now let’s have fun following query: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, PERCENTILE_CONT(0.5) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS MedianCont FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO The above query will give us the following result: The reason we get median is because we are passing value .05 to PERCENTILE_COUNT() function. Now run read the puzzle. Puzzle: Run following T-SQL code: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, PERCENTILE_CONT(0.9) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS MedianCont FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO Observe the result and you will notice that MidianCont has different value than before, the reason is PERCENTILE_CONT function has 0.9 value passed. For first four value the value is 775.1. Now run following T-SQL code: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, PERCENTILE_CONT(0.1) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS MedianCont FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO Observe the result and you will notice that MidianCont has different value than before, the reason is PERCENTILE_CONT function has 0.1 value passed. For first four value the value is 709.3. Now in my example I have explained how the median is found using this function. You have to explain using mathematics and explain (in easy words) why the value in last columns are 709.3 and 775.1 Hint: SQL SERVER – Introduction to PERCENTILE_CONT() – Analytic Functions Introduced in SQL Server 2012 Rules Leave a comment with your detailed answer by Nov 25's blog post. Open world-wide (where Amazon ships books) If you blog about puzzle’s solution and if you win, you win additional surprise gift as well. Prizes Print copy of my new book SQL Server Interview Questions Amazon|Flipkart If you already have this book, you can opt for any of my other books SQL Wait Stats [Amazon|Flipkart|Kindle] and SQL Programming [Amazon|Flipkart|Kindle]. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Generate MERGE statements from a table

  - by Bill Graziano

  We have a requirement to build a test environment where certain tables get reset from production every night.  These are mainly lookup tables.  I played around with all kinds of fancy solutions and finally settled on a series of MERGE statements.  And being lazy I didn’t want to write them myself.  The stored procedure below will generate a MERGE statement for the table you pass it.  If you have identity values it populates those properly.  You need to have primary keys on the table for the joins to be generated properly.  The only thing hard coded is the source database.  You’ll need to update that for your environment.  We actually used a linked server in our situation. CREATE PROC dba_GenerateMergeStatement (@table NVARCHAR(128) )ASset nocount on; declare @return int;PRINT '-- ' + @table + ' -------------------------------------------------------------'--PRINT 'SET NOCOUNT ON;--'-- Set the identity insert on for tables with identitiesselect @return = objectproperty(object_id(@table), 'TableHasIdentity')if @return = 1 PRINT 'SET IDENTITY_INSERT [dbo].[' + @table + '] ON; 'declare @sql varchar(max) = ''declare @list varchar(max) = '';SELECT @list = @list + [name] +', 'from sys.columnswhere object_id = object_id(@table)SELECT @list = @list + [name] +', 'from sys.columnswhere object_id = object_id(@table)SELECT @list = @list + 's.' + [name] +', 'from sys.columnswhere object_id = object_id(@table)-- --------------------------------------------------------------------------------PRINT 'MERGE [dbo].[' + @table + '] AS t'PRINT 'USING (SELECT * FROM [source_database].[dbo].[' + @table + ']) as s'-- Get the join columns ----------------------------------------------------------SET @list = ''select @list = @list + 't.[' + c.COLUMN_NAME + '] = s.[' + c.COLUMN_NAME + '] AND 'from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk , INFORMATION_SCHEMA.KEY_COLUMN_USAGE cwhere pk.TABLE_NAME = @tableand CONSTRAINT_TYPE = 'PRIMARY KEY'and c.TABLE_NAME = pk.TABLE_NAMEand c.CONSTRAINT_NAME = pk.CONSTRAINT_NAMESELECT @list = LEFT(@list, LEN(@list) -3)PRINT 'ON ( ' + @list + ')'-- WHEN MATCHED ------------------------------------------------------------------PRINT 'WHEN MATCHED THEN UPDATE SET'SELECT @list = '';SELECT @list = @list + ' [' + [name] + '] = s.[' + [name] +'],'from sys.columnswhere object_id = object_id(@table)-- don't update primary keysand [name] NOT IN (SELECT [column_name] from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk , INFORMATION_SCHEMA.KEY_COLUMN_USAGE c where pk.TABLE_NAME = @table and CONSTRAINT_TYPE = 'PRIMARY KEY' and c.TABLE_NAME = pk.TABLE_NAME and c.CONSTRAINT_NAME = pk.CONSTRAINT_NAME)-- and don't update identity columnsand columnproperty(object_id(@table), [name], 'IsIdentity ') = 0 --print @list PRINT left(@list, len(@list) -3 )-- WHEN NOT MATCHED BY TARGET ------------------------------------------------PRINT ' WHEN NOT MATCHED BY TARGET THEN';-- Get the insert listSET @list = ''SELECT @list = @list + '[' + [name] +'], 'from sys.columnswhere object_id = object_id(@table)SELECT @list = LEFT(@list, LEN(@list) - 1)PRINT ' INSERT(' + @list + ')'-- get the values listSET @list = ''SELECT @list = @list + 's.[' +[name] +'], 'from sys.columnswhere object_id = object_id(@table)SELECT @list = LEFT(@list, LEN(@list) - 1)PRINT ' VALUES(' + @list + ')'-- WHEN NOT MATCHED BY SOURCEprint 'WHEN NOT MATCHED BY SOURCE THEN DELETE; 'PRINT ''PRINT 'PRINT ''' + @table + ': '' + CAST(@@ROWCOUNT AS VARCHAR(100));';PRINT ''-- Set the identity insert OFF for tables with identitiesselect @return = objectproperty(object_id(@table), 'TableHasIdentity')if @return = 1 PRINT 'SET IDENTITY_INSERT [dbo].[' + @table + '] OFF; 'PRINT ''PRINT 'GO'PRINT '';

  Read the article

• How do I "print" to a PostScript file from LibreOffice Write?

  - by user69245

  Using OpenOffice with 10.04 I was able to print to a Postscript file, but I find I can't do this with LibreOffice and 12.04 - print-to-file goes to PDF. I want this feature so that I can use a FinePrint-like tool called fprint to print .PS files in booklet form. When I print from other applications I'm offered the usual choice of printers, including print to .PS, but LibreOffice restricts my choice.

  Read the article

• Sony Ericsson Windows driver problem

  - by alex

  I've installed Update Service and MediaGo for my Sony Ericsson phone but one of the drivers that was installed along with the software is causing problems in Windows 7 x64. Looking in the Event Log I see the following warning: Detected unrecognized USB driver (\Driver\seehcri) This is the driver corresponding to the Sony Ericsson seehcri Control Device. The failure to recognize the USB driver is causing problems with other services, namely the VMware USB Arbitration Service. It should normally start automatically but, due to the failure to recognize the seehcri USB driver, it fails with the following error: Error 31: A device attached to the system is not functioning. Disabling the driver has not helped at all. The VMWare service still refuses to start and I keep getting both warnings in the Event Log. I would like to remove the Sony Ericsson driver but unfortunately, that's not possible. Uninstalling the Sony Ericsson seehcri Control Device from Device Manager causes Windows to almost completely freeze up while trying to look for drivers for unrecognized hardware. Windows tries over and over again to locate and install drivers for an Unknown device, failing every time. Looking in Device Manager, it simply fills up with hundreds of unknown devices, also using up the CPU to almost 85% in the process. What should I do? How can I safely remove the driver without causing Windows to look for a new driver?

  Read the article

• SD Card reader not working on Sony Vaio

  - by TessellatingHeckler

  This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

  Read the article

• How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

  - by Burnzy

  I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

  Read the article

• 1 document pending in printer queue in System Tray that won't go away

  - by White Phoenix

  Edit: I didn't want to do it, but I restarted my computer - cleared the problem right away. Though if I were running a Windows 2003/2008 server, I would hate to have to restart the domain controller just to get rid of this irritating problem. If I run into this problem again, I'm going to try that remove printer/reinstall printer thing. Thanks for your help @Psychogeek. Points for your attempt. Running Windows 7, 32-bit Professional. My printer is an HP OfficeJet Wireless 8500. It's connected to my network wirelessly through TCP/IP as a standalone device. I was having some print problems awhile back and had to do some print spooler stuff as part of my troubleshooting (stopping the Print Spooler service, clearing the print spooler files from C:\Windows\System32\spool\PRINTERS and then restarting the service). I've finally narrowed it down to it being application specific, so that's that. However, as a leftover from all that troubleshooting, my printer icon is stuck in the tray - when I mouseover the icon, Windows says that there is 1 document(s) pending for my username. However, when I open up that printer's queue, there's nothing in there. I restarted the Printer Spooler service and also checked C:\Windows\System32\spool\PRINTERS if there's anything in there - nothing. I did a quick Google search and an answer from one of those "reps" at the Microsoft Socialnet site says for me to uninstall and reinstall the printer. The funny thing is, when I send print jobs, they print just fine - that 1 mystery document stuck in queue isn't stopping anything from happening. Short of having to do that, are there any other quick troubleshooting steps I may be missing?

  Read the article

• Driver issue for 7850 HD Diamond Windows 7

  - by Mr.Student

  I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

  Read the article

• After update to Windows 8.1 brigthness isn't working (changing)

  - by Bibo

  I just update my Windows 8 to Windows 8.1 by Windows Store and I have some problems. My notebook is Acer Aspire Timelinex 3820TG and I know it's little old for Windows 8 but I install them and works fine (I updated my HDD to SSD). Now I just updated Windows and I have problem with changing brightness on my dedicated graphic card (Ati HD 5650). First I can changing brigthness with fn + keys but It just changing level in OS. No change in real. I tried reinstall drivers, install drivers for my card from Acer with compatibility to Windows 7 and without change. When I switch to integrated card changing brightness works. I think the problem is with drivers but I don't know how to get it working. Thanks for help Bonus question: I have another problem (but this one is not so important). Does anyone knows what msietxghh.exe is doing? Everytime when my system runs (after update) I get message that this program stops working but I just cancel and looks everything works fine.

  Read the article

• LG W3000H-BN monitor cannot go above 1280x800

  - by Jo Profit

  I noticed that there are many people complaining about this issue with the W3000H but I have yet to find a solution that works for me. I am using Windows 7 Professional and and using a nVidia Quadro NVS 240 video card with a 4 monitor splitter cable. The cable from the monitor and the splitter are rated DVI-D Dual Link and the video card itself is rated for 2560x1600. I have installed the latest drivers for the video card and just grabbed the .inf, icm and cat file from the LG website and manually installed the monitor drivers. Does anyone have problems with the same setup? I have 3 other monitors (2 at 1920x1080 and 1 at 1280x1024). I really would like to be able to display the full resolution or else the large screen is useless. (I triple checked that the monitor itself supports this resolution). So monitor, cable, splitter and card supposedly support 2560x1600. Drivers are up to date but I cannot select that resolution when in the "Screen Resolution" menu, nor through the nVidia control panel. Please save me from madness :)

  Read the article

• No sound through headset - only mic is working

  - by Kristis

  I noticed that no sound is being played to my headphones. The laptop has a conexant sound card together with the sounds apps provided. But the thing is that I also noticed that now instead of one playback device - 2 are presented: speakers and headphones. And while speakers do play sound nicely - even test sound are not played through headphone output. Also, headphone output does not have a jack assigned to it, while speakers have L R Rear panel Analog Jack(my laptop does not have a jack on the back - only on the right). Also - my headphones have a mic as well - and when I plug it in - the mic is working(using top panel digital jack),but the headphones themselves are not. And laptop is recognizing when audio device is plugged in. And I checked the headset on other devices - the headphones are working. I have tried updating drivers, rolling back drivers and completely uninstalling drivers and then restarting - nothing helped. I imagine that I somehow need to reconfigure the jack configuration just have no idea how and where. Any suggestions? Thanks

  Read the article

• Web-To-Print - What technology should I explore? Web-Content -> drag & drop to Templates -> PDF

  - by hamlin11

  I'm discussing some software design issues with a potential client and the idea of Web-to-Print technology has come up. We need users to be able to drag images from an image library to various regions defined by a template. Example: Images may go in box A, B, or C and text may go in boxes D or E. These templates would be setup Boxes A through E would be defined inside a template by administrators using some sort of editor. These templates would serve as a mapping from web-content to a PDF. Once users drag images and insert text in the appropriate regions of the template, the result will be converted into a PDF. Is this feasible these days with jquery & asp.net? That would be nice. If not, what would be the ideal solution?

  Read the article

• how can I get jquery.sIFR plugin to display sIFR-alternate text for print?

  - by apeBoy

  I'm struggling with this. I've used the jquery sIFR plugin as opposed to sIFR it prevented conflicts with other jquery I am using on my pages. It works fine in its prime function: replacing html text with Flash. However, the .sIFR-alternate class is given an inline style of 'opacity: 0' which persists when flashblock is on. So alternate text does not appear. Neither does it appear when printng the page (yes I have included styles for sIFR-print). I've tried replacing the opacity:0 inline style with display: none but this causes height issues with the output flash. Any one else had this or have any ideas?

  Read the article

• Print number series in java

  - by user1898282

  I have to print the series shown below in java: ***1*** **2*2** *3*3*3* 4*4*4*4 My current implementation is: public static void printSeries(int number,int numberOfCharsinEachLine){ String s="*"; for(int i=1;i<=number;i++){ int countOfs=(numberOfCharsinEachLine-(i)-(i-1))/2; if(countOfs<0){ System.out.println("Can't be done"); break; } for(int j=0;j<countOfs;j++){ System.out.print(s); } System.out.print(i); for(int k=1;k<i;k++){ System.out.print(s); System.out.print(i); } for(int j=0;j<countOfs;j++){ System.out.print(s); } System.out.println(); } } But there are lot of for loops, so I'm wondering whether this can be done in a better way or not?

  Read the article

• Printer Management in AD Domain

  - by Untalented

  Hello, I normally push out all my printers via group policy preferences. However, the new copy machines I have are using some stranger drivers and I can not install x64/x86 drivers on the same machine for my clients to pull drivers from. So now I have two machines setup with the printer so they can pull drivers. Ontop of this there is specific driver configuration settings such as requiring the user to enter an access code to print set. Once the printer is installed via GPP, it puts everything to the default such as color mode, and other custom settings we like. I considered just using a Windows Print Server for this, but I do not know a way to push/delete these from clients like I can with GPP. Does anyone know how I can have a GPP copy the custom configuration I have set in the driver or have any recommendations?

  Read the article

• Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

  - by Filip Ekberg

  I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >