Search Results

Search found 11938 results on 478 pages for 'secure boot'.

Page 39/478 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• booting FreeBSD 9 from USB stick: boot error

  - by ssc

  I am trying to boot FreeBSD 9 from a USB stick that I created following the official guidelines: dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/da0 bs=64k Booting fails with a simple 'boot error'. I have used this USB stick for quite a while for the very purpose of booting / installing new OSs, but I tried a different one anyway - same problem. I have also reproduced the issue on a different machine. I've acquired to image file over torrent which AFAIK has an md5 check built in, but I downloaded it again anyway directly from a FreeBSD mirror. Same result. Does anyone have any success with this ? I did not find anything related online which seems to suggest this is not a well-known problem. Does anyone have a thought where else to search for the cause of the problem ?

  Read the article

• Windows XP not able to boot after loading isapnp.sys driver

  - by pragadheesh

  Hi When i power on my DELL Latitude E6400 laptop running on Windows XP SP3, i get a black screen and hangs after that. So I tried to boot through safe mode which hangs after loading the driver isapnp.sys. Doing a bit of googling i found out Windows XP not booting up including safe mode So I loaded my XP boot cd and tried Recovery Console. In the Recovery console, doing "dir" gives the error "an error occurred during directory enumeration". Then i tried chkdsk /p /r which gave "the volume appears to contain one or more unrecoverable problems" How can i fix these please. Thanks in advance.

  Read the article

• IBM x3620 Server takes a long time to boot past UEFI to OS

  - by Joel Coel

  I have a pair of IBM System x3620 servers. These servers do fine once they finally reach the point where the operating system takes over, but it takes them forever to get past the new-fangled UEFI boot system... a good five minutes or so; maybe longer. I haven't timed it, but it's the kind of thing where you go get a cup of coffee while you wait and it's still going when you come back. Normally the only time I shut these down is for a monthly maintenance cycle (usually just windows updates), and so it's not a big deal. But in the case where I might have an outage I'd sure like to get that 5 minutes back. Is there anything I can do to tell them to just go ahead and boot already?

  Read the article

• Debian boot disc with a gnu zebra

  - by user30597

  Hello How can i build a debian boot disc with GNU Zebra installed on it? Thanks.

  Read the article

• Debian boot disc with a gnu zebra

  - by user23413

  Hello How can i build a debian boot disc with GNU Zebra installed on it? Thanks.

  Read the article

• Linux Defualt Startup Display PCI to fix black boot screen

  - by Jonathan

  You heard it all before black screen on boot after perfectly fine install of most linux ubnuntu mint etc distributions (the netbook works fine) It has an Intel N10 integrated graphics chipset. I have actually found that if I plug in an external display then remove it the default screen turns on and my laptop works fine drivers all great - I have tried the screen cycle button fn f7 but doesn't work when no display is plugged in. It also works out all the correct resolutions and no modification of the grub bootloader or creating any xorg configs. So I think my monitor is forcing to a display that doesn't exist. Do you know if there is anyway I can force it to choose a different screen at boot so I can get a login screen? I can use nomodeset on grub but xrandr cant add the damned 1024 600 60 resolution that I need! Ideas guys?

  Read the article

• Can't boot into Linux partition after installation

  - by Otto

  I just installed Ubuntu. I created a partition in MacOSx using Disk utility, then deleted the partition and installed Ubuntu on the free space created. After the installation, Ubuntu said it would reboot. I hang on shutdown (which is normal, as google told me), so I used the power button to turn the MacBook off. Now I want to boot into Ubuntu. Pressing option/alt on startup only shows me the MacOSx and Windows partition. Also, the Linux partition isn't showing up on my MacOSx desktop. And in Disk Utility, I can see 3 grayed out partitions: "disk0s4", "disk0s5" and "Linux Swap". What can I do to boot into Ubuntu without losing my other partitions? Thank you for your help.

  Read the article

• Trouble with external monitor under Windows 7 on MacBook Pro Boot Camp

  - by Colm

  I'm running Windows 7 32-bit on a mid-2010 15" MacBook Pro Intel Core i5 under Boot Camp. I've had trouble getting it to work with my second display and searching Google for an appropriate answer has failed me. I'm on the latest version of Boot Camp - 3.2 - and have updated the drivers for the NVIDIA GeForce GT 330M. The monitor is connected via a VGA cable, and is a Dell ST2410. The monitor is recognised by Windows, which knows it's a Dell and its resolution. The desktop should be extended onto the second monitor - however nothing is showing. It remains black, though it doesn't show a lack of signal coming through which I would have expected. Any ideas what's wrong?

  Read the article

• Can Windows 8 boot from FireWire?

  - by Holli

  I read many times Windows 7 is unable to boot from an external FireWire drive but I wonder if Windows 8 is able to do so. I need to run Windows on my Mac but only very few times so my idea was to move it all to an external drive. I have one of the first Intel Macs so running Windows in a virtual machine is not really fun. The performance is just too poor. Adding a Boot Camp partition to my internal drive is also not possible at the moment.

  Read the article

• Toshiba Equium A110-252 laptop won't boot Windows.

  - by Drew Gibson

  I have a Toshiba Equium A110-252 laptop (XP Pro) which stopped booting a couple of weeks ago. The symptoms are that the laptop would display its DOS Toshiba splash screen, then the Windows (XP) boot screen would display, then a very brief blue screen flash, then back to the boot options screen (offering safe mode, safe mode with networking etc, last known good config, etc... none of these work). I assumed a duff HD, and swapped it for a new one and reinstalled from a TrueImage backup. This worked until I installed windows updates I think (the backup was a few months old), and now the PC is doing the same thing. I have installed a third, old HD (60GB) with Ubuntu 11.04 on it, and everything is fine. PC boots and runs Ubuntu beautifully. I need Windows running on it though ! Given these symptoms, could it a windows update issue ? Or might I have a hardware fault still ?

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• Computer has power but won't boot

  - by John Isaacks

  When I power on my computer it will not boot. It will not even go into bios or anything. It is as if it is not powering on at all, however the decorative casing lights turn on and the PC is making noise (like from the fans). I am reluctant to think it is the power supply since some part are getting power. I do not know what it is though? For the couple days leading up to this, the computer would make a loud noise and the screen would stop displaying anything. I had to reboot to get it to work again. Now nothing happens when I boot, except the case lights come on and it sounds like some fans are coming on. Any ideas?

  Read the article

• Issue using a "used" SSD as a Windows 8.1 Boot Drive

  - by EpiGrad

  So, I'm something of a Mac person, but decided to take a stab at this whole "build yourself a PC" thing - right now, the thing is assembled, posts just fine, and can get to the BIOS. The problem is the drive I want to use - I intended to use a 80 GB Corsair SSD I've had sitting around as the boot drive, and a new Samsung SSD for games and the like. So I boot using a Windows 8.1 install USB stick, and if the Samsung drive is plugged in, it happily offers to install Windows on it. The Corsair drive though, it's flipped out - I reformatted it as a blank NTFS drive (it was HFS for Mac purposes) and the BIOS can't see it, nor can the Windows installer. What's wrong, and how do I fix it? The tools at my disposal are: The current ASUS BIOS that came with my motherboard (a Z87I-Deluxe), a Mac running the latest OS X which can also boot to Windows 7 if needed via either Parallels or Bootcamp. Update 1: Update: Based on a friend's suggestion to switch SATA ports, Windows 8.1's installer can now see the drive as Drive 0, Partition 1, a 83.8 GB "Primary" partition. But when I click it and hit "Next", I get the following error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files" - not that it gives any clue how to access those. Update 2: Following a trail of Google suggestions, I ended up going into advanced tools and just reformatting the drive as follows: Start DISKPART. Type LIST DISK and identify your SSD disk number (from 0 to n disks). Type SELECT DISK <n> where <n> is your SSD disk number. Type CLEAN Type CREATE PARTITION PRIMARY Type ACTIVE Type FORMAT FS=NTFS QUICK Type ASSIGN Type EXIT twice (one to get out of DiskPart, the other to exit the command line tool) Per these instructions. This goes well enough, but now I can select the disk for installation, and I get a new error: "Windows 8 cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GP disks." So, Googling that, I do the following: select disk 0 clean convert gpt exit ...and we might have fixed it. Windows is at least trying to install now.

  Read the article

• Enabled boot logging option in Win XP doesn't produce ntbtlog.txt file

  - by Xolstice

  I have tried enabling the boot logging option for Windows XP Pro using the F8 and also boot.ini method, but it does not seem to be creating the expected ntbtlog.txt file. I'm doing this to help me solve a problem where the Avast antivirus service is not starting up - it keeps complaining with the message: "Error 1068: The dependency service or group failed to start". I seem to notice that the file is produced on a system where the Avast antivirus is starting up without any problems. Can anybody suggest why the ntbtlog.txt file is not being created?

  Read the article

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• Windows 8.1 will not boot after upgrading from Windows 8 on my PC

  - by user266969

  I have not found a fix. After running the Windows 8.1 Update from the store my computer will not boot unless In insert my recovery USB drive and try to repair. (The repair fails.) However after I power of the PC and remove the USB drive. The PC will boot correctly once. I would leave the PC on but it shuts it self off at night. (And yes I have checked my power profile, it is set to never.) The only thing I have found online is a possibly corrupt video driver. I uninstalled the video driver reboot and it did not fix the issue. Anybody have any suggestions? The PC is a HP EliteBook 8730w laptop. I had no issues with Windows 8 or the Windows 8.1 preview.

  Read the article

• Is it possible to boot from internet?

  - by Calmarius

  Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

  Read the article

• Sony Vaio laptop hangs up on boot

  - by Kole

  When I power on the laptop it displays the "Vaio" logo and the screen after show, but after that the screen is completely blank but the backlight is lit. Nothing progresses from here. When trying to press f8 to boot into safe mode, nothing happens, black screen again. I created a windows 7 32bit install disk (I had the same OS on it before) to repair or even format my pc. I boot from the disk and it loads all the files and gets to the "Windows is starting" screen but after that it always hangs up on a blank screen with a mouse cursor. Is there any fix to this whatsoever?

  Read the article

• How to edit the Boot Graphics Resource Table / Edit windows 8 BOOT LOGO?

  - by user144773

  I want to edit the screen which is displayed when windows 8 (starts) loads (/loading). As for now it has the Toshiba logo, I want my custom logo or the windows default logo. I have found that UEFI has something called "Boot Graphics Resource Table" and that it overides the default logo if there is a image present (source) How can I edit the logo stored in UEFI firmware or Boot Graphics Resource Table? if it's in the "bootres.dll", which does UEFI use? My disk (spread across a few system/usefi/windows/etc partitions) has around twenty bootres.dlls. The bootres.dll is signed by Microsoft, but I don't have to worry because I can sign the file I edit myself with my own certificate.

  Read the article

• Virtual Box start from dual boot systme

  - by Richard

  So for a long time now, I've been running Linux on a dual boot system with Windows 7. I don't run Windows very often, however it happens enough now that I started looking at alternatives to reboots. A friend showed me Parallels on his Mac, and I fell in love with the concept of Virtual machines. Since Sun has been in the Unix space since the beginning of time, they likely have the best solution for Linux (big assumption I know). Anyway, to avoid re-installing windows, as I have it set up the way I like it now, I was wondering if there was a way to point to the existing install and boot from that point. Linux is installed on /dev/sda Windows is on /dev/sdb Having never done this before a little handholding would be great as to what step I should take. Thanks for any help in advance!

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

  Read the article

• How to fix windows 7 boot process

  - by MasterCorban

  Ok so i used xp for years before i was able to get my hands on the Windows7 RC which i bought a new HDD for, and then followed the process to dual-boot. About a month ago xp started acting funny and i thought the disk might be dying. So i started using Windows7 all the time. Today i start the computer and it cant find the disk which xp was on anymore. I guess its dead. So i remove the xp HD and my computer cant start...insert bootable disk or something similar So how can i remove the primary(dead) xp disk and boot straight to Windows 7?

  Read the article

• Dual-boot more than two operating systems

  - by aldorado

  I currently run Windows 7 and Ubuntu 12.04 as a dual-boot system. I need Linux, but Ubuntu freezes at least once a day. So I want to replace it with another distribution like Debian or LMDE. On the other hand I am a little concerned that I'll have troubles working with a less user friendly operating system than Ubuntu. So would it be possible to just scale down the Windows partition and install the next Linux as a third system? Thus, with a "triple-boot system" I could keep Ubuntu until I feel familiar with the new system. Afterwards, I guess, it should be possible to replace the Ubuntu partition by expanding the new system?

  Read the article

• Ubuntu 12.04 (dual boot with Windows 7), doesn't boot after I deleted some files from Windows. What can I do?

  - by sacha

  The Ubuntu 12.04 I have installed (in Dual-Boot with Windows 7) using WUBI worked perfectly for over a month. Then it informed me that I ran out of space on the hard drive and I assumed it was because my hard drive on Windows was full. I logged into Windows and deleted the whole New Volume D. But now the problem is that it is not possible to log into Ubuntu but in Windows it's possible. I really paid attention about not deleting important files in Windows. When i try to log into Ubuntu : _either it does not go far and i have to restart the computer _or it goes until the loading time and a message says something like "[...] Graphics could not be detected [...]" and they ask to choose between 4 options including "Start with poor Graphics", "Reconfigure Graphics", "Troubleshoot" and "Restart the computer". But none of the options run and i also have to restart the computer manually from that point I have plenty of useful files in Ubuntu so i want to find another way to solve the problem instead of Uninstall/Reinstall Ubuntu. I want to know what happened ? And how to make it work ?

  Read the article

• How to I make my bootcamp partition bootable again?

  - by KJFMusic

  I'm having a similar problem as everyone else in this posting. I have 5 partitions. 3 of which I created for my Mac OS Lion installation, Windows 7 installation and a 3rd for storage. Everything was running fine for quite sometime until recently. My Windows 7 installation has suddenly stopped booting. Instead of a start up screen I get: Windows failed to start. A recent hardware or software change might be the cause. File: \BOOT\BCD Status: 0xc000000d Info: An error occurred while attempting to read the boot configuration data Mac OS Lion starts up fine. I'm unable to mount my "Bootcamp" partition nor the "Storage" partition. On top of that "Storage" has been renamed to "disk0s5". When I installed Windows 7 it didn't recognize the "Storage" partition that was created in Lion so it merged what it thought was free diskspace (I'm assuming the same space that Mac OS recognized as Storage) to the Root Drive of Windows 7 (Bootcamp). Are you able to assist?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >