Search Results

Search found 11896 results on 476 pages for 'smart pro'.

Page 39/476 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• Disable of discrete/native graphics on MacBook Retina when using apps like VMware, VLC, etc

  - by badkitteh

  I got a MacBook Pro Retina a few months ago and I'm really happy with it. However, since I do a lot of work in different environments/OSes, I make heavy use of VMware to have them with me when I'm on the road. The MBPr has a great battery life - as long as integrated graphics are being used. Unfortunately as soon as I launch VMware, the MacBook switches to discrete graphics and battery life is effectively halved. I noticed that after installing gfxCardStatus, and now I'm wondering if there is a way to force the integrated graphics being used all of the time, so I can enjoy maximum battery life. Thanks.

  Read the article

• Delete the pendrive contents and also trash in Mac OS X?

  - by Warrior

  I am using a MacBook Pro. I copied some data from my pen drive to my Mac and deleted the content by moving it to trash. After that when I see the info of pen drive it give more value than the original value. If I cleaned the content of the trash only I am able to see the correct value of pen drive and able to copy data. Has Mac been designed like that or is there some other way to delete other than using the "move to trash" option? Thanks.

  Read the article

• Second display freaks out when waking from sleep

  - by inkedmn

  I have two laptops, an older white MacBook and a brand new Macbook Pro. When either computer is on my desk, I connect it to a second, widescreen display (Acer, a couple years old, uses DVI). The Macbook connects via mini DVI and the MBP connects via mini displayport. When the Macbook is connected and everything goes to sleep, I'm able to wake the machine and both displays in the normal way and everything is fine. Sometimes, when waking the MBP, the laptop and primary display are fine, but the second display shows a bunch of static. If I restart the display, everything's fine. This probably happens 70% of the time when the MBP goes to sleep while connected to this display. Any idea what could be causing this?

  Read the article

• Why is my metro screen getting extended to half of the second screen?

  - by maximusyoda

  When I extend my desktop to the second screen, it stays fine for a few minutes, but after a while, the first metro screen stretches all the way to half of the second screen. The search bar etc stops working. The desktop itself shares fine. But the metro screen is messed up as well as the resolution. The second screen is using the recommended resolution. All I want is to have an extended screen. The problem occurs in my office Windows 8 laptop as well. Not sure what to do with it. Device: Surface Pro 2 External Monitor: Dell 2208WFP 1680 x 1050 Pixel Resoultion 22''

  Read the article

• Why ping another inet machine from MacBook get netgate's ip address?

  - by Xinwang

  I have three machine in my home network connected by a wireless router. One is server installed linux at 192.168.1.1, another is Thinkpad with MS Windows XP at 192.168.1.2, last one is MacBook Pro with Mac OS X 10.6.3 at 192.168.1.3. When I ping the Linux Server from Thinkpad (MS Windows XP) I can get the correct ip address, but when I ping it from Mac I get the global address of my router, like 61.135.181.175. Could you tell me why this happen? And how do I get same ping result on Mac and Windows. Thanks

  Read the article

• page up/down print ~ instead of history search in terminal

  - by Desmond

  I am on a Macbook Pro with mac os x 10.8.2 I have set: page up: \033[5~ page down: \033[6~ in terminal keyboard settings (pressing esc to get \033). My ~/.xinputrc is: # Be 8 bit clean. set input-meta on set output-meta on set convert-meta off # Auto completion options set show-all-if-ambiguous on set completion-ignore-case on # Keybindings "\e[1~": beginning-of-line # Home key "\e[4~": end-of-line # End key "\e[5~": history-search-backward # Page Up "\e[6~": history-search-forward # Page Down "\e[3~": delete-char # Delete key "\e[5C": forward-word # Ctrl+right "\e[5D": backward-word # Ctrl+left I am just following a guide found on internet (actually there are a lot of guide really similar): http://macimproved.wordpress.com/2010/01/04/fix-page-updown-home-end-in-terminal/ Unfortunately, the only (terrific) result is that when I press page up (fn + up arrow) just a "~" is printed in the terminal.

  Read the article

• SVN Error when connecting from MacBook

  - by user66850

  This is drying me nuts for last 5 days!!! Out of the blue 5 days ago, SVN access from my MacBook Pro failed: I cannot access any SVN (i.e. not in our University or open source projects etc). The error obtain when performing 'svn co', or any other svn commands is shown below. This is same message is obtained irrespective of the svn repository (i.e. it is something due to my Macbook) svn co http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH/ svn: OPTIONS of 'http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH': Could not read status line: connection was closed by server (http://anonsvn.internet2.edu)

  Read the article

• Delete the pendrive contents and also trash in Mac OSX?

  - by Warrior

  I am using a Macbook pro. I copied some data from my pen drive to my mac and deleted the content by moving it to trash. After that when I see the info of pen drive it give more value than the original value. If I cleaned the content of the trash only I am able to see the correct value of pen drive and able to copy data. Has Mac been designed like that or is there some other way to delete other than using the "move to trash" option? Thanks.

  Read the article

• Windows 7 on 1st Gen MacbookPro Unibody (Q4-2008) - power problems.

  - by typemismatch

  I have the first generation macbook pro, purchased Q4 2008. I've been trying to run Windows 7 and can get it all installed great with the BootCamp 3.1 64 bit drivers however ... power management isn't great. The screen and keyboard don't automatically dim - the laptop gets too hot. I noticed on some newer macbook pros that windows 7 works perfectly and the above doesn't happen. Does anyone know if there really is a hardware issue with this 1st gen or is there some firmware update I can use to fix this? Thanks!

  Read the article

• Primary monitor keeps reverting back to the laptop display

  - by Celeritas

  A Macbook Pro running VMware Fusion has a guest operating system of Windows 7. The user often connects an external monitor to the laptop through an HDMI cable. For the display settings "extend the desktop" is selected and I keep setting the primary monitor as the external one but for some annoying reason it keeps changing back. So after Windows starts the taskbar and icons are on the laptop screen which we don't want. I know how to change it but it keeps changing back (and the computer user is non-technical).

  Read the article

• Upgrading MacBookPro

  - by moray95

  I'm using a Late 2011 13" MacBook Pro with an Intel i5 @ 2.4 GHz and 4 GB 1333 MHz ram. The computer has started to get older. I was going to upgrade the ram but since Mavericks come out, the ram problem just went away and now, it started to get slower and slower. So I was thinking of upgrading my ram to at least 8GB and my CPU. I have two question about that. As I have 1333Mhz rams installed by default, the motherboard should not support 1666Mhz rams. But can I use 1666 Mhz ones and if I can will it make any difference? Also is it possible to upgrade the CPU of my computer? If yes how can I find a CPU compatible with the other components?

  Read the article

• Fix two-finger Trackpad Scrolling on a Macbook running Bootcamp

  - by roryok

  This is an issue that's annoyed me for some time. About a year ago, the two-finger scrolling in Windows 7 on my Macbook Pro stopped working. I discovered that a fix for this is to open Bootcamp from the control panel, go to the Trackpad tab, tick and untick "Tap to click" and click ok. This has to be done every time the machine is woken from sleep or rebooted. I'm now using Windows 8 and encountering the same issue. I've tried several different driver revisions, and none have helped. I'm sick of going through the motions. Has anyone got a solution for this?

  Read the article

• How do I assign a MBP's Mission Control button (F3) for use in Windows 7?

  - by Everett

  I have a recent Mac Book Pro that I triple boot (OS X, Win7, BT5). I'd like to use the Mission Control button (F3) in Windows 7 on my MBP to call Dexpot's "Windows Catalog." Does anyone know of: 1) A setting in Windows (Registry adjustment, etc) that I could assign for this to work? 2) A setting in Dexpot that would configure this? 3) A piece of software that does this? My preference for the answer is in the order above. If I get multiple answers, the one that works, that is posted first, that does what 1) states, gets selected. If 1) won't work, I'll select from answers to 2), etc...

  Read the article

• What are the current options to encrypted a partition on mac os x ?

  - by symbion

  I recently got my laptop stolen with some sensitive informations on it (personal source code, bank details in a secure file, passwords, etc) and I learnt the lesson: encrypt your sensitive data. Now, I am wondering what are the options to encrypt a partition (not an encrypt disk image) ? Aim: The aim is to prevent anyone (except me) to access those data. Requirement 0: The software must be able to encrypt non system partition. Requirement 1: Plausible deniability is required but preventing cold boot attack is however not an absolute requirement (I am not famous enough or have sensitive enough info to have this kind of requirement). Requirement 2 : Software taking advantage of AES hardware encryption are very welcome as I intent to get a Macbook Pro with i7 CPU (with AES-NI enabled instructions). I will have avirtual machine running in the encrypted partition. Requirement 3 : Free or reasonably cheap. Requirement 4 : Software must run on Mac OS X Snow Leopard or Lion. So far, TrueCrypt is the only option I have found. Regards,

  Read the article

• Since Google doesn't use nofollow anymore what is smart alternative?

  - by SharkTheDark

  Since from 2009. Google count nofollow links also as outgoing link, what are alternative to stop Google count outside links from my page? If I make links appear on my page source like this: <span hrefs="http://link" rel="nofollow" link="true">Link Name</span> and then in JavaScript replace span with a tag and replace hrefs with href for every span tag that has link="true". Will this help?

  Read the article

• How do I easily repair a single unreadable block on a Linux disk?

  - by Nelson

  My Linux system has started throwing SMART errors in the syslog. I tracked it down and believe the problem is a single block on the disk. How do I go about easily getting the disk to reallocate that one block? I'd like to know what file got destroyed in the process. (I'm aware that if one block fails on a disk others are likely to follow; I have a good ongoing backup and just want to try to keep this disk working.) Searching the web leads to the Bad block HOWTO, which describes a manual process on an unmounted disk. It seems complicated and error-prone. Is there a tool to automate this process in Linux? My only other option is the manufacturer's diagnostic tool, but I presume that'll clobber the bad block without any reporting on what got destroyed. Worst case, it might be filesystem metadata. The disk in question is the primary system partition. Using ext3fs and LVM. Here's the error log from syslog and the relevant bit from smartctl. smartd[5226]: Device: /dev/hda, 1 Currently unreadable (pending) sectors Error 1 occurred at disk power-on lifetime: 17449 hours (727 days + 1 hours) ... Error: UNC at LBA = 0x00d39eee = 13868782 There's a full smartctl dump on pastebin.

  Read the article

• How do you monitor SSD wear in Windows when the drives are presented as 'generic' devices?

  - by MikeyB

  Under Linux, we can monitor SSD wear fairly easily with smartmontools whether the drive is presented as a normal block device or a generic device (which happens when the drive has been hardware RAIDed by certain controllers such as the one on the IBM HS22). How can we do the equivalent under Windows? Does anyone actually use smartmontools? Or are there other packages out there? The problem is that SCSI Generic devices just don't show up in Windows. If the drives aren't RAIDed we can see them fine. How I'd do it in Linux: sles11-live:~ # lsscsi -g [1:0:0:0] disk SMART USB-IBM 8989 /dev/sda /dev/sg0 [2:0:0:0] disk ATA MTFDDAK256MAR-1K MA44 - /dev/sg1 [2:0:1:0] disk ATA MTFDDAK256MAR-1K MA44 - /dev/sg2 [2:1:8:0] disk LSILOGIC Logical Volume 3000 /dev/sdb /dev/sg3 sles11-live:~ # smartctl -l ssd /dev/sg1 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.49-0.3-default] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device Statistics (GP Log 0x04) Page Offset Size Value Description 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 26~ Percentage Used Endurance Indicator |_ ~ normalized value sles11-live:~ # smartctl -l ssd /dev/sg2 smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.32.49-0.3-default] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device Statistics (GP Log 0x04) Page Offset Size Value Description 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 3~ Percentage Used Endurance Indicator |_ ~ normalized value

  Read the article

• How to fix high Load_Cycle_Count laptop drive (TOSHIBA MK6006GAH in Vaio TX1XP)?

  - by Sam Brightman

  Hoping someone knows exactly what's going on here. It seems this drive has some combination of aggressive power saving settings and Ubuntu defaults that has massively increased the Load_Cycle_Count for the drive: https://wiki.ubuntu.com/DanielHahler/Bug59695 So the drive is now so slow that it cannot boot because it takes long enough to access the data that the kernel will not recognise it properly. I'm not worried about the data on the drive, but would really like to keep the laptop functioning. There is some indication that this is possible because the figure is still low 200,000s and most drives supposedly go to 600,000. Additionally, SMART tests pass and consider the drive healthy and without errors. But the really surprising thing was when I ran mhdd... Every single read came up red (slow) until I pressed 'R' for reset drive. I noticed the next read was normal speed, so held down 'R'. Magically the drive read perfectly for as long as I held the key BUT resumed slow (and noisy) seeking/reading after releasing. I don't think the source code to mhdd is available, so I'm not exactly sure what this means (besides, I don't know enough low-level HDD stuff either). It seems like the drive should be able to work, but is stuck trying to power save or something. There are no BIOS options on the laptop. Does anyone know how I can stop the drive from doing extremely slow/noisy operations like this? Or is constantly resetting the drive also damanging, and only causing it to work well by luck (i.e. not a suggestion that it's fixable)?

  Read the article

• Nest reinvents smoke detectors. Introduces smart and talking smoke detector that keeps quite when you wave

  - by Gopinath

  Nest, the leading smart thermostat maker has introduced a smart home device today- Nest Protect, a smart, talking smoke & carbon monoxide detector that can quite when you wave your hand. Less annoyances and more intelligence Smoke detectors are around for hundreds of years and playing a major role in providing safety from fire accidents at home. But the technology of these devices is stale and there is no major innovation for the past several years. With the introduction of Nest Protect, the landscape of smoke detectors is all set to change just like how Nest thermostat redefined the industry two years ago. Nest Protect is internet enabled and equipped with motion- and smoke-detection sensors so that when it starts beeping you can silence it by waving hand instead of doing circus feats to turn off the alarm. Everyone who cooks in a home equipped with smoke detector would know how annoying it is to turn off sensitive smoke detectors that goes off control quite often. Apart from addressing the annoyances of regular smoke detector, Nest Protect has talking capabilities. It can alert users with clear & actionable instructions when it detects a danger. Instead of harsh beeps it actually speak to you so you know what is happening. It will tell you what smoke it has detected and in which room it is detected. Multiple Nest Protects installed in a home can communicate with each other. Lets say that there is a smoke in bed room, the Nest Protect installed in bed room shares this information to all Nest Protects installed in the home and your kitchen device can alert you that there is a smoke in bed room. There is an App for that The internet enabled Nest Protect has an app to view its status and various alerts. When the Protect is running on low battery it alerts you to replace them soon. If there is a smoke at home and you are away, you will get message alerts. The app works on all major smartphones as well as tablets. Auto shuts down gas furnaces/heaters on smoke Apart from forming a network with other Nest Protect devices installed at home, they can also communicate with Nest Thermostat if it is installed. When carbon monoxide is detected it can shut off your gas furnace automatically. Also with the help of motion detectors it improves Nest Thermostat’s auto-away functionality. It looks elegant and costs a lot more than a regular smoke detector Just like Nest Thermostat, Nest Protect is elegant and adorable. You just fall in love with it the moment you see it. It’s another master piece from the designer of Apple’s iPod. All is good with the Nest Protect, except the price!! It costs whooping $129, which is almost 4 times more expensive than the best selling conventional thermostats available at $30. A single bed room apartment would require at least 3 detectors and it costs around $390 to install Nest Protects compared to 90$ required for conventional smoke detectors. Though Nest Thermostat is an expensive one compared to conventional thermostats, it offered great savings through its intelligent auto-away feature. Users were able to able to see returns on their investments. If Nest Protect also can provide good return on investment the it will be very successful.

  Read the article

• net.tcp Listener Adapter and net.tcp Port Sharing Service not starting on reboot

  - by Peter K.

  I am using the net.tcp protocol for various web services. When I reboot my Windows 7 Ultimate (64-bit) macbook pro, the service never restarts automatically, even though that is how they are set: The only relevant events I can see are in the System Event Log: Error 6/9/2011 19:47 Service Control Manager 7001 None The Net.Tcp Listener Adapter service depends on the Net.Tcp Port Sharing Service service which failed to start because of the following error: The service did not respond to the start or control request in a timely fashion." Error 6/9/2011 19:47 Service Control Manager 7000 None The Net.Tcp Port Sharing Service service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion." Error 6/9/2011 19:47 Service Control Manager 7009 None A timeout was reached (30000 milliseconds) while waiting for the Net.Tcp Port Sharing Service service to connect. This post suggests that it's something else blocking the port (in the post it's SCCM 2007 R3 Client which I don't use). What else could be the problem? If it's something else blocking the port, how do I figure out what? When I manually start the services, they start correctly. Dependencies are: Net.Tcp Port Sharing Service Net.Tcp Listener Adapter Still no luck, but I think the problem might be that my network connection takes too long to come up. I put in a custom view of the event log, and found these items: The first in the series says: A timeout was reached (30000 milliseconds) while waiting for the Net.Tcp Port Sharing Service service to connect.

  Read the article

• Synergy on macbook with osx mavericks wifi connection

  - by user332956

  I'm trying to set up Synergy with my macbook pro running OS X 10.9.3 as a client and my Windows 7 desktop as a server. I'm having some pretty bad connection problems though when I try to use my mac. Every couple seconds the mouse or the keyboard will stop working entirely then come back. I ran some tests and found that the ping from my desktop to my mac would be very high every third ping or so(1000+ ms) or sometimes even time out. If I ping my desktop from my mac the pings are all reasonably low. I believe that this is a power saving feature of Mavericks and I have found a way to get around it by continually pinging my router on my mac, keeping my wifi card from going to sleep. I'm using this right now to type this up with synergy and have had zero issues. Has anyone else ran into this issue and found a better solution? So far, I think my best bet would be to buy an ethernet adapter but I'd rather not have yet another cable running across my desk.

  Read the article

• USB Device Not Recognized (Mac)

  - by Nargis

  Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

  Read the article

• Win7 x64 unresponsive for a minute or so. HD failing?

  - by Gaia

  On a fully updated Win7 x64, every so often the system stalls for a minute or so. This has been going on for a couple months now. By stalling I mean the mouse responds and I can move windows around, but any window, any program, that is open becomes whiteish when I select it AND any new programs will not open. It doesn't matter what kind of program it is. When the stall stops all clicks I made (open new programs for example) take effect. Nothing shows up consistently (as in every time this happens) in the event log. Today though I was able to find something, but it doesn't reveal much other than the "system was unresponsive". It's a 7009 for "A timeout was reached (30000 milliseconds) while waiting for the Windows Error Reporting Service service to connect." It doesn't matter if I have any USB devices plug-in or not. I've ran Microsoft Security Essentials and Malwarebytes. While the machine is unresponsive, I've noticed that Drive D (the other partition on the single internal HD in this laptop) is displayed like this in explorer. This never occurs with Drive C or any other drive on the machine. . SMART report for the physical drive: Read benchmark by HD Tune 5 Pro, probably the most telling piece of the puzzle. Isn't this alone enough to see there is a problem with the drive, regardless of whether the unresponsiveness is caused by such purported problem? Here is a short hardware report: Computer: LENOVO ThinkPad T520 CPU: Intel Core i5-2520M (Sandy Bridge-MB SV, J1) 2500 MHz (25.00x100.0) @ 797 MHz (8.00x99.7) Motherboard: LENOVO 423946U Chipset: Intel QM67 (Cougar Point) [B3] Memory: 8192 MBytes @ 664 MHz, 9.0-9-9-24 - 4096 MB PC10600 DDR3 SDRAM - Samsung M471B5273CH0-CH9 - 4096 MB PC10600 DDR3 SDRAM - Patriot Memory (PDP Systems) PSD34G13332S Graphics: Intel Sandy Bridge-MB GT2+ - Integrated Graphics Controller [D2/J1/Q0] [Lenovo] Intel HD Graphics 3000 (Sandy Bridge GT2+), 3937912 KB Drive: ST320LT007, 312.6 GB, Serial ATA 3Gb/s Sound: Intel Cougar Point PCH - High Definition Audio Controller [B2] Network: Intel 82579LM (Lewisville) Gigabit Ethernet Controller Network: Intel Centrino Advanced-N 6205 AGN 2x2 HMC OS: Microsoft Windows 7 Professional (x64) Build 7601 The drive less than 1 year old. Do I have a defective drive? Seagate Tools diag says there is nothing wrong with the drive... UPDATE: I noticed that the windows error reporting service entered the running state then the stopped state and the space between the two events was exactly 2 minutes. Which error it was trying to report I don't know. I check the "Reliability Monitor" and it shows no errors to be reported. I've disabled the windows error reporting service to see if the problem stops.

  Read the article

• MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!)

  - by The Geek

  Want to rip a DVD to your hard drive, but don’t have a software package to do it? How-To Geek readers can get the normally non-free MacX DVD Ripper Pro for free, but only if you download your copy and install it before Saturday. Here’s how to get it. This time-limited offer is available to anybody for the next couple of days—just head to the download site, install the software package, and use the key provided. It’s as simple as that. Note: despite the confusion of the name, it’s available for both Mac and Windows. Latest Features How-To Geek ETC MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? Save Files Directly from Your Browser to the Cloud in Chrome and Iron The Steve Jobs Chronicles – Charlie and the Apple Factory [Video] Google Chrome Updates; Faster, Cleaner Menus, Encrypted Password Syncing, and More Glowing Chess Set Combines LEDs, Chess, and DIY Electronics Fun Peaceful Alpine River on a Sunny Day [Wallpaper] Fast Society Creates Mini and Mobile Temporary Social Networks

  Read the article

• Low hanging fruit where "a sufficiently smart compiler" is needed to get us back to Moore's Law?

  - by jamie

  Paul Graham argues that: It would be great if a startup could give us something of the old Moore's Law back, by writing software that could make a large number of CPUs look to the developer like one very fast CPU. ... The most ambitious is to try to do it automatically: to write a compiler that will parallelize our code for us. There's a name for this compiler, the sufficiently smart compiler, and it is a byword for impossibility. But is it really impossible? Can someone provide a concrete example where a paralellizing compiler would solve a pain point? Web-apps don't appear to be a problem: just run a bunch of Node processes. Real-time raytracing isn't a problem: the programmers are writing multi-threaded, SIMD assembly language quite happily (indeed, some might complain if we make it easier!). The holy grail is to be able to accelerate any program, be it MySQL, Garage Band, or Quicken. I'm looking for a middle ground: is there a real-world problem that you have experienced where a "smart-enough" compiler would have provided a real benefit, i.e that someone would pay for?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >