Search Results

Search found 2728 results on 110 pages for 'volume'.

Page 39/110 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• SQL Server plus small files

  - by user1467163

  I have a MSSQL server, 3 volumes, that runs some processes that seem to take way too long. One of these processes reads in a zip file, then writes to a database based on what's in the zip file.... for each record. I have 2 volumes in use and am creating the third- so I am trying to plan how to do this. OS has to remain on vol. 1. The TLogs should probably go on the new volume and the mdf's on the existing vol.2.. Do I put the file store on the volume with the MDF's so they don't interfere with the TLog writes, or with the TLogs so they don't interfere with the TLog flush to the MDFs? I know it's best to have more servers / volumes but I have to make do with whats on hand for now. I appreciate any suggestions.

  Read the article

• MPlayer refuses to generate mono wav file

  - by JCCyC

  I want to downsample an existing audio file to 8KHz mono. This command line downsamples it to stereo: mplayer -quiet -vo null -vc dummy -af volume=0,resample=8000:0:1 -ao pcm:waveheader:file="/tmp/blah1.wav" ~/from_my_cellphone.3ga It generates a file that the file utility identifies as stereo: $ file /tmp/blah1.wav /tmp/blah1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 8000 Hz Now, if I read the documentation correctly, I should add pan=1:0.5:0.5 so I get a file that's half the size: mplayer -quiet -vo null -vc dummy -af volume=0,resample=8000:0:1:pan=1:0.5:0.5 -ao pcm:waveheader:file="/tmp/blah2.wav" ~/from_my_cellphone.3ga But it doesn't! blah2.wav is identical to blah1.wav! What am I doing wrong?

  Read the article

• From which plex am I booted from on raid?

  - by rumburak

  I have a server with mirrored boot volume. It is software raid 1 in Windows Server 2008 R2. I do not have physical access to the server. I am looking for a way to check which disk is a boot drive. I need a way to check it from os. How can I do that ? EDIT: I know how to do that, but I dont think its proper way. From diskpart I can break mirror: select volume 0 break disk=0 And Windows will only allow me to do that on not current boot disk. I want to check which one is boot without breaking mirroring.

  Read the article

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• Should I run my own MTA?

  - by Mascarpone

  I need to send a large volume of emails, roughly 60.000 per week. At the moment we outsource this service to a third party, and we expect to double our volume within the next 6 months. Since the service is starting to be too expensive, I was thinking about setting up our own MTA. Our own SysAdmin told us it is not difficult at all to have our own MTA, but I'm afraid he might have oversimplified this. Is it difficult to handle a MTA? Should I be afraid that my MTA will lose the company mails? Should I stay with a third party service? p.s: The emails have been collected respecting the local legislation on privacy, so no spam.

  Read the article

• Force ID of user created by apt-get

  - by Bart van Heukelom

  Context: I'm automatically installing postgresql-9.1 on an Ubuntu server with apt-get. This creates the required postgres user. The Postgres data is on an external volume that survives reinstalls. This data is obviously owned by the postgres user. The problem I'm having is that the ownership is not recorded under the name postgres, but under the UID that postgres had at creation time. When the server is reinstalled, postgres sometimes gets a different UID, and no longer owns the data directory, and thus does not work. Question: Can I force the UID of the user postgres created by apt-get to something fixed? Or is there another way to solve my problem? (As you may have deduced, this is on Amazon EC2 with the data on an EBS volume)

  Read the article

• How to permanently disable Firefox Flash plugin sound in Win 7 now that plugin-container.exe is here

  - by Subuser

  I want Flash to play without sound on my machine, and I want that preference to stick so that new sessions don't surprise me with sound. Using FlashBlock while trying to remember to disable sound every time a flash window is started doesn't do the trick for me -- it's too difficult to remember to check the mute status before and after playing videos. Previously, using Win 7 and Firefox, one could selectively disable sound from Flash plugins using the method described in this question. Older methods of disabling it included the plugin called FlashMute. FlashMute fails me even when this trick has been employed, and the volume method described in the previous question only works for the currently live session, resetting sound to maximum volume whenever the plugin container is restarted. What is the best way to disable Flash sound?

  Read the article

• Looking for a way execute a task on all files in a directory (recursively) on Windows

  - by stzzz1

  I have a huge number of mp4 video files that needs to have a volume boost. I need a way to execute a ffmpeg audio filter on all files in a specified base directory (and in subdirectories as well). My problem is that I'm working on a Windows computer and I have no knowledge of its shell syntax. I would like to do the equivalent of what this bash script does : TARGET_FILES=$(find /path/to/dir -type f -name *.mp4) for f in $TARGET_FILES do ffmpeg -i $f -af 'volume=4.0' output.$f done I spent quite some time this afternoon looking for a solution but the recursive nature of what I need (that is so simple with find!) isn't too clear. Any help would be greatly appreciated!

  Read the article

• What happens when I delete the first of several AWS EBS snapshots?

  - by Jepper

  On http://aws.amazon.com/ebs/pricing/ it says: "EBS Snapshots [...] For the first snapshot of a volume, Amazon EBS saves a full copy of your data to Amazon S3. For each incremental snapshot, only the changed part of your Amazon EBS volume is saved." I intend to snapshot some of my instances daily and keep snapshots for 7 days after which the snapshots are destroyed. What happens when, eventually, I destroy the first snapshot? Will the subsequent snapshots be worthless given the first is no longer available?

  Read the article

• Dry length of buoy in OrcaFlex

  - by KAE

  I use a software package called OrcaFlex to model the behavior of a buoy in ocean waves. I would like to share OrcaFlex questions in this forum - hope some users are out there! Here is a starter question: For a 6D buoy, I extracted the 'Dry Length' after the simulation completed. The value of the Dry Length sometimes slightly exceeds the actual height of the buoy, even though this would not seem to be possible given the formula from the manual, Dry Length = (cylinder length) × (cylinder volume above surface) / (cylinder total volume). Any insights?

  Read the article

• Decrypting a TrueCrypt drive pulled from another machine

  - by Blakeg08

  I work in a corporate environment and we are now required to encrypt laptops. I have already encrypted about 5 or 6 out of 40. I still have a few questions before we go all out with TrueCrypt. Can I decrypt a hard drive by plugging it into my desktop using a data transfer kit? I tried this and the hard drive showed up asking me to format before using the volume. If I have the TRD from each laptop backed up do I still need to backup the volume headers? What else do I need to back up? Thanks.

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• Do you lose everything when you have a hard disk failure in a multi-hard disk LVM that does NOT use RAID?

  - by user72630

  I'm debating about using LVM for a media/file server because I would like to combine multiple physical hard disks into one volume. I do not wish to use any RAID in my LVM so my question is: If one of the multiple hard disks in my volume were to go down would I lose all my data or would I just lose the data that was stored on that individual disk? Also, if I were to just lose the data on the individual disk, would it be as simple as replacing that disk and restoring what was on it from a backup to recover? Thanks everyone.

  Read the article

• How to recover data from Dell dimension 9150 RAID 0 on another system?

  - by Adam

  I have a Dell Dimension 9150 which has failed. I'm trying to recover the data. It had two SATA 250GB drives in RAID 0 configuration. I'm trying to use a shuttle PC running Windows7 to recover the data from the drives which contained an XP boot volume. I just want the data, it doesn't have to boot. What program would I need to rebuild / interrogate the drives (one of them is failing the onboard hardware test)? What drivers would I need to install? Windows7 sees the drive as one partition but doesn't see volume information. Ubuntu can see the drive as one partition and also can tell what the drive is called, but can't access the data Any help appreciated!! :)

  Read the article

• Windows Explorer - How can an large file have a zero "Size on disk" value? What does it mean

  - by Jaans

  I would expect some discrepancy between "Size" and "Size on disk" in Windows Explorer due to file system allocations etc. Below is a screenshot of an example file on a Windows 2012 R2 file server that has a 81.4 MB "Size" but for the "Size on disk" it's 0 bytes. What gives? I have other files doing the same, but yet another set of files and folders behaving as expected showing the size on disk relatively close to the actual file size. The volume is a basic disk, formatted with NTFS and the default 4K allocation units. No compression is set for any file or folder on the volume. (For those more paranoid, I did a malware scan, and also confirmed there is not ADS streams associated with the file in question). The user account running Windows Explorer is the domain administrator, and the file owner is also the domain administrator. Thanks for reading!

  Read the article

• Linux/OS X dualboot on a Macbook Pro with RAID

  - by GaretJax

  I'd like to install Gentoo Linux on my Macbook Pro by keeping my current OS X installation. I currently have OS X installed on a RAID 0 on two 160GB Intel SSDs and I'd like to create a new partition for Gentoo alongside OS X without losing the RAID setup but, from what I read on the net, Apple's software RAID is poorly (read "not at all") supported: BootCamp refuses to create a windows partition on a RAID volume rEFIt is not able to boot an OS from a software RAID even Apple's recovery partition for Lion can't be created on a RAID volume Is there a way to dual boot my Macbook while keeping the RAID solution?

  Read the article

• Losing file permissions after rebooting Windows 7

  - by SMTF

  I have a User directory full of files that are not accessible permission wise for the user who's home directory it is. Said user can't run Explorer. For example, it provides an error complaining that permission is not available for required files. I tried various ways to give said user permission of his home directory and things are fine until after rebooting the machine; the permissions reset to the previous state and the problem persists. I followed the solution outlined here. And again things worked until I reboot the machine. I'm in this mess because I replaced a corrupted user profile as outlined here. The original user and the new replacement on are/where both admin accounts. In case it is relevant I will mention that the Users directory is not on the C volume but a D volume on the same machine. Any insight is appreciated.

  Read the article

• Sharing a symlinked (`mklink /d`) directory via SMB?

  - by Alois Mahdal

  I have a Windows 7 amd64 box where one directory is shared: local path is d:\drop\ remote path is \\aloism\drop from SMB point of view, Everyone has Read and Write permission ACLs for the folder are set so that all authenticated users have read and write permissions:NT AUTHORITY\Authenticated Users:(OI)(CI)C (which is inherited to all levels below) Now I create a symbolic link within the structure of the directory: D:\drop>mklink /d tools2 tools symbolic link created for tools2 <<===>> tools The problem is that I can't access this new directory from any of the remote machines (a Windows 7 box and a Windows XP box—both behave the same way): C:\>dir \\aloism\drop\tools2\ Volume in drive \\aloism\drop is droot Volume Serial Number is FA73-1897 Directory of \\aloism\drop\tools2 File Not Found How can I make it work? Possibly also for files?

  Read the article

• How can I run fsck on a disk image via Mac Terminal?

  - by mvizual

  I want to run fsck on a disk image before I use it to restore (replace) a corrupted volume. Using Terminal, what would be the proper command, syntax, and options for this operation? I've just recently become acquainted with Terminal and line commands, so syntax and specific options aren't part of my computing vocabulary. I'm using Terminal 2.1.2, bash, OS 10.6.8. Ultimately, I'm trying to restore an image to a secondary startup volume (external drive). The image is mounted on my desktop and I want to check it for errors before I use it. Disk Utility runs "repair disk" successfully but the integrity of the image is suspect.

  Read the article

• How to un-partition a drive on windows 7

  - by Michael Rentmeister

  I bought this laptop used from a friend. The laptop has 500gb of storage; however, the drive is partioned. The C: drive has an allocated space of 50gb whereas the partition has 396gb allocated to it. How do i either take some of the space from the partition and move it to the C: drive, or get rid of the partition? I've done some searching and people say I'm supposed to be able to use "Disc Management" to "delete volume," but when i right click on the partition the "delete volume" is not enabled. Here is a picture:

  Read the article

• Mount drive at /Volumes/NAME/ or similar in Cygwin

  - by Adam

  Hi.. I'm using Cygwin on Windows 7. When I plug in an USB stick, the drive automatically gets mounted to /cygdrive/x . This is good and really easy to use. My problem is that the drive letter changes sometimes, and when I've got remotes set up in git - I've got one called usb at /cygdrive/h/ - this sometimes doesn't work and I have to change the remote URL. That's just an example, there are other scenarios where I wouldn't want it to change. I like what the Mac does, and puts mounts a volume at /Volumes/STICK (STICK is the Volume name of my usb stick). Is there any way I can do this, or something similar under Cygwin. Thanks

  Read the article

• how to recover data from my disk - I accidentally copied with dd an iso on it

  - by sijoune

  I wanted to create a bootable usb from an iso image and i accidentally put as the output of the dd, instead of my usb drive, one of my hard disks. The iso was 3,3 GB and my disk is 1TB! And it was almost full. Can i at least restore the data that has not been overwritten? Right now i can't even mount it. I get this error: Error mounting /dev/sdd1 at /media/main/UDF Volume: Command-line `mount -t "udf" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,umask=0077" "/dev/sdd1" "/media/main/UDF Volume"' exited with non-zero exit status 32: mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Also since i know which filesystem my disk used if i reformat it to this filesystem is there any chance i can mount it and retrieve the rest of the files?

  Read the article

• How to fix a Corrupted USB

  - by Help

  My USB stick has suddenly stopped working. It's a Busbi 4GB. My USB used to be G:/ but as soon as I plugged it in, I used to get a pop up box showing that it was plugged in. Now, when I plug this in, it shows as I:/ and no pop up box appears. It shows in my computer as I:/ and when I click to open it says I:/ is not accessible the disk structure is corrupted and unreadable. I have tried to change the file name back to G:/ but nothing happened (this was under disk management). On disk management, it shows Volume as I:/ Layout simple Type Basic File system RAW status Healthy (Active,Primary partition) Capacity 3.42GB. I've tried right clicking properties then the tab tools and click error checking (this option will check the volume for errors). When I click "check now" it comes up with the disk check could not be performed because Windows cannot access the disk.

  Read the article

• Google tweets – Now search twitter archives using Google

  - by samsudeen

  Google has launched a Twitter archive service which allows you to  search tweets in real time as well as on its huge public archive (remember Twitter crossed 10 billionth tweet last month). The search results are displayed as tweets with twitter logo. To explore the twitter search go to Google.com homepage  and select   “Show options” on the search results page, then select “Updates.”.  The search is similar to the Google search with options to dig through the tweets by timeframe. You can explore results by zooming through a particular time range  or date. In addition to the time chart, it also displays the relative volume of an activity on Twitter about the topic. as you can see there is a spike about GSLV launch after 3 PM today.There is also a short cut link “Now” on the left corner which displays the latest results on the topics searched.The tweets also gets refreshed automatically.   Considering the huge volume of activity (50 million messages per day) on twitter, the archive is going to more and bigger. By providing such feature Google has once again proved it is way ahead of others in search Related Posts:None FoundJoin us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Google tweets – Now search twitter archives using Google

  - by samsudeen

  Google has launched a Twitter archive service which allows you to  search tweets in real time as well as on its huge public archive (remember Twitter crossed 10 billionth tweet last month). The search results are displayed as tweets with twitter logo. To explore the twitter search go to Google.com homepage  and select   “Show options” on the search results page, then select “Updates.”.  The search is similar to the Google search with options to dig through the tweets by timeframe. You can explore results by zooming through a particular time range  or date. In addition to the time chart, it also displays the relative volume of an activity on Twitter about the topic. as you can see there is a spike about GSLV launch after 3 PM today.There is also a short cut link “Now” on the left corner which displays the latest results on the topics searched.The tweets also gets refreshed automatically.   Considering the huge volume of activity (50 million messages per day) on twitter, the archive is going to more and bigger. By providing such feature Google has once again proved it is way ahead of others in search Related Posts:None FoundJoin us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >