Search Results

Search found 9557 results on 383 pages for 'x86 64'.

Page 39/383 | < Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >

• windows 7 frequently crashes when running 64 bit debian on virtualbox

  - by erin c

  I've been having some hard times with Virtualbox. I use it to run 64-bit Debian guest on a Windows 7 host to be able to code for linux systems. It generally crashes when I build my code in eclipse cdt, or if I am doing some intensive operations. Should I lower the memory and core usage? Is this some sort of virtualbox problem? I upgraded to virtualbox v4.1.8 and the problem still occurs. My virtual machine instance uses 1736MB out of 4GB of ram, and I use 2 out of 8 processor cores. But still, the whole thing crashes 1 or 2 times every single day.

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Diagnose remote desktop freezes in Windows 7 when no BSOD?

  - by Paul Smith

  Okay, I'm getting no joy from Asus or Microsoft on this, so hoping for some clues on how to narrow down the cause. I have very frequent OS freezes, always & only when running Remote Destkop Client (mstsc) in Windows 7 x64. I never have a bluescreen, and there is never a minidump. The display & input just freezes -- no keyboard, no mouse, and sound will just continue the last wavelength if any. So far, I can't find a way to trap the hang given that there's no bluescreen; advanced startup & recovery settings for system failure are "Write an event" checked, "Automatically restart" checked, and "Kernel memory dump". I've updated to the lasted BIOS, and tried a few different graphics drivers, both generic & ATI. I've also tried disabling Aero, and everything about the remote desktop experience (incrementally unchecked every box in the mstsc - options - experience tab), even disabled/unplugged external monitor to make sure it wasn't a dual-monitor issue. My specs are: Asus G73jh notebook 8GB RAM ATI Mobility Radeon HD 5800 Series graphics (recently tried driver versions 8.791.0.0, 8.801.0.0) American Megatrends G73jh.211 BIOS (7/27/2010) Windows 7 Home Premium x64 Windows Memory Diagnostic passed all of the following at least 3 times with no errors: MATS+ INVC LRAND Stride6 WMATS+ WINVC This notebook is better than most at removing heat (laudable vent design), so I'm not inclined to suspect thermal causes (especially since running 1080p video for hours has never caused a freeze, but mstsc does, reliably, within 5 minutes to an hour). This did seem to start happening after a Windows Update, but I've since reverted every patch applied since a week before the first occurrence, with no joy. (And I'd only had the PC for a couple weeks before that, so it could have been chance + less actual time spent remoting at the beginning.) I'm at my wits end, and I bought this laptop primarily as a remote terminal client (go figure, right?) Any ideas on how to identify the cause of this? Thanks!

  Read the article

• Windows 2008 Server SP2 64bit - TCP Connections never releasing after TIME_WAIT

  - by Peco

  Hello fellow admins :) We have an issue with Windows 2008 Datacenter edition SP2 64bit. We have a process that is polling very frequently and establishing new TCP connections. The system gets in a state where we end up with over 16k connections in TIME_WAIT state. The default OS timeout is 120 seconds after which these connections should go away, but that never happens. These connections persist and never get cleaned up even after the originating process has long terminated (we are still at 16k connections two days after the process was killed). The OS is supposed to time them out but it doesn't. Has anyone else seen this behavior and if so what was done to resolve it. We are aware of how to tune the tcp stack to make the timeout shorter or allow more connections but this is not the issue here. Thanks!

  Read the article

• Auto-connect Bluetooth headphones in Windows 7 64bit

  - by CptSkippy

  I have a pair of bluetooth headphones that I've successfully paired with my Windows 7 64bit machine and audio plays through them without a hitch. On the Device Stage under the properties of the headphones in troubleshooting it shows "last connected" as "currently connected" even if I power cycle the headphones or after a reboot of my computer. So the Windows bluetooth stack has no trouble finding them. The problem I have is that whenever the headphones reconnect to my pc they show up as disconnected in the Sound Settings and no sound is routed to them until I manually connect them. I have to go into Sound Settings, then from the Playback tab right click on the headphones and choose the Connect option. Is there a way to make the Sound Settings connect automatically whenever the headphones are available to Windows?

  Read the article

• importing old .eml files int outlook 2010

  - by Duncan Kenworthy

  I was having so many problems with my laptop & Windows vista that I have updated to Windows 7 64bit. Because I was having so may problems I wanted a 'clean' upgrade so didn't want to carry over any programs or settings. Prior to changing over I saved all the folders I wanted from MS mail to a separate drive and then updated to Win 7 and Office 2010. To my horror I don't seem to be able to import my .eml messages into Outlook which means all my mail is in limbo. Please can anyone help me to simply import my old inbox messages into my new inbox as I have given up trying using the import/export menu as there doesn't seem to be a choice that works. Help!! Not too good a nerd!

  Read the article

• 64bit guest OS on 32bit host OS => useable RAM?

  - by Milde

  Hi, I've read that you can run a 64bit guest OS on a 32bit host OS through virtualisation (if the CPU/BIOS supports it etc...). Now I ask myself: How many RAM can the guest OS use/allocate? (assuming 4GB+ RAM) Thanks in advance.

  Read the article

• Some Apps don't start on Windows 8 Release Preview

  - by Exa

  I recently installed the Release Preview of Windows 8 in a virtual machine. Some apps do not work. When I open them (by clicking on their tile in the start screen) I see a splash screen and nothing else happens. Sometimes the app crashes after 30 seconds, sometimes it just keeps on loading. A good example is the "Map"-App from Windows 8 or the app "Cookbook" by Bewise. I installed Cookbook and when I had a look at the task manager I saw that it was the 32bit version running, but I have an x64 Windows 8... Could this be a problem? Shouldn't the Windows Store download the correct version? This is the setup of my virtual machine: Windows 8 Release Preview x64 Oracle VirtualBox 4 of 8 cores from host system 8 of 16 GB RAM from the host system 256 MB graphics memory guest additions installed resolution 1920 x 1080 Do you need further information? Unfortunately there is no error message... I just see the start screen of the app with its logo and it keeps loading, but nothing happens. Other Apps (like Mail, Video, Social, etc.) work fine.

  Read the article

• Dosbox USB print Windows 8.1 64Bit

  - by eCronik

  Worked fine until I've upgraded to Windows 8.1 as well as made the mail programm working (had to get a windows live ID and have to type in a password now, when starting Windows). I did set the USB printer to lpt1 on the local Windows 8 computer and another XP computer via LAN to lpt2 the same way with the same printer on the Windows 8 computer. But now it doesn't work anymore from the Win8 one (where the printer is plugged via USB). Tried already deleting lpt2: on the XP one, as well as lpt1 on the Windows 8, resetted it. Not working... :-( I tried also net use lpt1: \server\printer password "\user:Ute Berger" /persistent:yes of course with the correct server and shared printer name as well as net use \server\printer "\user:Ute Berger" password /persistent:yes . This is the name displayed as a user now. But in C:\users it is named Benutzer1. Tried this one also. Nothing worked. What could be the problem here? What's strange is that when I type "net use lpt1:" on the XP, I get another error (67 - The networkname wasn't found) than trying something I didn't set up like lpt2 (2 - The system can't find the file). Could this be a possible problem as even if deleted something is left blocking on the Windows 8 computer? Please help me - I tried for hours today but all I've got was frustration... Regards Tim

  Read the article

• TCP > COM1 for receiving messages and displaying on POS display pole

  - by JakeTheSnake

  I currently have a Java Applet running on my web page that communicates to a display pole via COM1. However since the Java update I can no longer run self-signed Java Applets and I figure it would just be easier to send an AJAX request back to the server and have the server send a response to a TCP port on the computer...the computer would need a TCP COM virtual adapter. How do I install a virtual adapter to go from a TCP port to COM1? I've looked into com0com and that is just confusing as hell to me, and I don't see how to connect any ports to COM1. I've tried tcp2com but it doesn't seem to install the service in Windows 7 x64. I've tried com2tcp and the interface seems like it WOULD work (I haven't tested), but I don't want an app running on the desktop...it needs to be a service that runs in the background. So to summarize how it would work: Web page on comp1 sends AJAX request to server Server sends text response to comp1 on port 999 comp1 has virtual COM port listening on port 999, sends data to COM1 pole displays data

  Read the article

• Pinnacle Studio 14 Importer crashes on Windows 7 x64

  - by Tuminoid

  Pinnacle Studio 14 Importer crashes on Windows 7 x64, thus I'm unable to import videos from my camcorder. I've Googled around and it seems to be a problem with x64 support in the program, but there is no info if it can somehow be remedied with Compatibility settings, XP mode. Further Googling got me this link, and none of the tips in site it links help. I've got no idea what ObjectDoct Plus 2 is (no a program or service installed by that name) which he claims causes the problem. Is that ObjectDoct critical to Pinnacle Studio and how to get rid of it (or any other advice how to make Studio 14 work on x64). UPDATE: 1) XP mode doesn't help as it doesn't handle Firewire, which is how my Canon HV20 must be connected to transfer HDV from tape. 2) I don't have that ObjectDock installed. 3) I don't wanna re-buy PS15 just to get this solved as PS14 should be able to do it.

  Read the article

• Why am I missing 4GB of RAM on Windows Server 2008 R2 64bit?

  - by Nick G

  I noticed today that a server was very low on memory. It physically has 8GB installed and runs Windows 2008 R2 Standard 64bit. It also hosts 2 virtual machines using HyperV. Server is Dell Poweredge R510. However the host OS reports in task manager that it only has 4GB of RAM, despite actually having 8GB and it being a 64bit OS. Computer properties shows Installed memory: 8.00GB (3.99GB usuable). Why would "usable" be half the real RAM installed under a 64bit OS? Additionally nearly all of the 4GB of visible RAM on the host OS is being used by something without anything showing up in task manager (presumably HyperV as it's allocated 3.6GB to the virtual machines its hosting). However that doesn't explain where the other 4GB has gone which Windows can't even see. Where is my missing 4GB of RAM? Update: Dell OpenManage says this: Total Installed Capacity 8192 MB Total Installed Capacity Available to the OS 4096 MB So looks like Nathan's suggestion of memory mirroring might be correct. I'll have to reboot to check this (I think?) Update 2 OK. So I reboot and I get a message saying "the amount of system memory has changed" (despite not having touched the hardware in a year). Once Windows has booted, all 8GB is visible again. Looks like I probably have a hardware RAM issue (I'll perhaps try reseating it whenever I can chuck everyone off the server next). Thanks for your answers and comments. I was hoping it was going to be the mirrored-RAM option but it seems not - that's not even mentioned in the BIOS.

  Read the article

• Slow upload, fast download on Windows 7 64bit system

  - by Malik

  I've got a weird problem in the download speeds on my desktop PC (Windows 7 Home Premium 64bit) are consistently fast (approx. 400kB/s) but uploads are very slow (around 6-10kB/s). This has been going on for the last 3 weeks or so. I am a very competent user and troubleshooter, and have searched online for 2 weeks for a solution, to no avail. Part of the problem is that internet is provided by WiFi by my landlord and I have no access to the router (BT Home Hub router) although I know for sure he wouldn't have the first idea on how to restrict my usage :) (rules that out) Anyway, I've tried: - various drivers (my Wifi 'card' is TP-link TL-WN851N, and I've tried TP-link + Atheros + Qualcomm Atheross drivers, suggested by Microsoft) - various tweaks to network parameters (e.g. as suggested by SpeedOptimser) - various tweaks to Windows 7 services (e.g. disabling/manual-ing unecessary services) - raising and lowering head onto a reasonably firm surface at moderate frequency (jk :D) None of the above have helped, and I'm officialy asking for help now!! Thanks for your time and effort in advance!

  Read the article

• Different PATH environment variable for 32bit and 64bit Windows - is it possible?

  - by Piotr Dobrogost

  Is it possible to have whole or part of PATH environment variable specific to the type of running process's image (32bit/64bit)? When I run some app from within 64bit cmd.exe I would like to have it pick the 64bit version of OpenSSL library whereas when I run some app from within 32bit cmd.exe I would like to have it pick the 32bit version of OpenSSL library. FOLLOW UP where.exe does not find OpenSSL libs when %ProgramFiles% variable is used in the PATH environment variable

  Read the article

• Ubuntu 9.10 Nvidia GTX 260 x64 installation

  - by klapi

  I think I tried everything I could but I still can't get my Nvidia GTX 260 to run on the newest ubuntu 9.10 x64. Update: I was able to stop the gdm with sudo service gdm stop However, after downloading the latest driver from nvdia - I am told that my video card is not supported.

  Read the article

• Why wouldn't I want to run Windows Server 2008 R2 Enterprise x64 instead of Windows 7 Ultimate x64?

  - by Hafthor

  I'm currently running Windows 7 RC and I'm ready to pave and reinstall on my laptop. Are there features in Windows 7 I won't have access to if I install Server 2008 R2? Are there applications or drivers that won't work? I'm primarily interested in running a Server OS to support SharePoint development. (Yes, I am aware of the hackaround to install it on Win7.)

  Read the article

• Running a program causes everything afterwards to minimize

  - by Xitcod13

  I just installed LoL (league of legends) on my computer. The problem is that almost every time after I play the game, it minimizes all my windows which is really annoying. What is worse however is that afterwards other programs do this as well. Is there any way to fix this? What can cause such a strange behavior?? I recently installed the internet driver. Hopefully that is not the problem because this is the third internet card for this computer. I have noticed that my internet is messing up as well.

  Read the article

• Win 7 firewall won't turn on, nor the McAfee firewall. Hit by "Win 7 Anti-virus 2012" trojan. Removed, but a downed firewall is a lasting legacy

  - by PhxTitan

  I caught the Trojan right away, I think, but both my McAfee & Win 7 (x64) firewalls are not able to be engaged/turned on now. MS Error Code 0x80070424 when attempting to turn on Win 7 firewall. No viruses. Swept it with McAfee AV, Malwarebytes Anti-Malware, Microsoft malware removal tools. Followed Microsoft's three courses of alternative actions they posted for instructions for getting the Win 7 firewall back up and on. Nothing. Same error code. The post just said see MS support if those fixes failed. So I removed McAfee altogether. Still Win 7 (professional version) firewall won't come on; and clean of detectable bugs. And I'm fully updated with MS Windows 7 updates as well, which is no longer automatic, that too a legacy of the trojan bug I think. Any thoughts on how to get the Win 7 firewall operational??? And auto updating reengaged?

  Read the article

• Could 0x800CCC0E in Outlook be caused by bad wireless connection?

  - by AndrejaKo

  I have a computer connected to a WiFi access point/router/modem. Sometimes, I get page not found errors and similar when opening a browser window, sometimes pings fail and it looks like the router's signal isn't very good. On the other hand, I get around 4 bars of signal strength in windows and graph looks good in Inssider. I also never get dropped connection to the router. My main problem is that I often get errors (such as 0x800CCC0E) in Outlook 2010 that after some searching appear to be connected to bad server connection. I'm using GMail over IMAP and all settings are correct. I didn't have similar errors on my previous router, but I'm not 100% sure that they appeared after switching to current one. It may have worked for some time without errors. There are also around 3000 messages on the server and the size of mailbox is around 12 GiB, which may contribute to the problems. On the other hand, there are at least 24 other networks in the 2.4 GHz range which I'm using and the number may have increased since I switched routers. Should I try solving this by getting a router with stronger signal?

  Read the article

• RAR Command Line Maximum Compression

  - by Steve Robathan

  I am writing a batch file to compress a folder using various archiving applications. Currently I also use Winrar (X64) but manually set up the parameters I would like to add rar to my batch The folder concerned has many sub folders and I need to take this into account What is the command line for the following keeping folder structure?: Solid Archive, Archive Format=RAR5, Compression Method=Best, Dictionary Size=1024MB Many thanks

  Read the article

• This operation has been cancelled due to restrictions in effect on this computer

  - by Dan

  I have this HUGELY irritating problem on Windows 7 (x64). Whenever I click on ANY link (that exists on a Word document, Excel or Outlook), I get an alert box with the message: This operation has been canceled due to restrictions in effect on this computer I have been scouring my settings and the Internet for a solution, but to no avail. What is the reason for this problem? It even happens when I click anchors in word document. That is, I can't even click on an entry in a Table of Contents to go to the appropriate page - I get this same error then. Is this a Windows 7 thing? Is there any way to turn this off?

  Read the article

• Windows 7 Taskbar doesn't remember configuration

  - by eidylon

  Hi all... I have my taskbar on Win7 all customized. I have it at the top of the screen, and i have the address bar, desktop toolbar, and a custom folder toolbar all turned on. I have it set to two rows, and have the taskbar and desktop on one row and the address bar and custom folder on the second row. When i shutdown then restart my computer it remembers that i have the taskbar at the top of the screen, but it does not remember the way i had the various bars organized, and it just makes it a single row with the bars all mushed together on one row. Anyone else had this/know how to fix it? Running Win7 Ultimate x64.

  Read the article

• How can old DOS utilities be incompatible with x64?

  - by Dims

  I found that ARJ.EXE archiver does not run under Windows 7 x64. Bot how can it be? The task of the achiver is to do some very basic file IO. How can it be so? Also I found that apparently no any old command line utility does not run under Windows 7 x64. Also I found that there is no any compatibility option for this case. Is this a very great Microsoft sabotage? Are there any ways to overcome this? Thanks

  Read the article

• Windows 7 x64 support for Intel GMA 3650 (or GMA 3600)

  - by Loom

  I recently purchased an Intel D2700 MUD motherboard and I cannot find drivers for the Win7 x64 integrated graphics (Intel GMA 3650 aka PowerVR sgs545). The accompanying CD contains Win7 x32 version only. When I run it I got an error: This computer does not meet the minimum requirements for installing the software. I tried to use online utility Intel Driver Update Utility Graphics. I used Chrome, Firefox, Internet Explorer without success. First, UAC prompt appear, and then endlessly spinning progress-bar with text "Analyzing computer...". The text in UAC prompt is: Program file name: System Requirements Lab Verified publisher: Husdawg, LLC I downloaded this utility (intel_srldetect_4.5.5.0) and started it from my hard disk. I got an error: A network error occured while attempting to read from the file: C:\Users\Loom\Downloads\SystemRequirementsLab_intel_4.5.5.0.msi Standard VGA driver works for this video card but without hardware acceleration: Hardware acceleration is either disabled or not supported by your video card driver, which could slow game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on. Where I can get appropriate driver?

  Read the article

• Looking for command line interface for setting Index properties for many files

  - by Sherryl

  I'm looking for a way to set a group of File Types to "Index Properties and File Contents" (Control Panel, Indexing Options, Advanced Options, File Types). Basically I'd like to write a batch file that switches that setting for a large group of file types and be able to share it with my entire team. Clicking in the UI is time consuming for everyone. This is a great solution for bringing up the GUI, but I'd like to create a batch file What is the command line for Indexing Options?

  Read the article

< Previous Page | 35 36 37 38 39 40 41 42 43 44 45 46  | Next Page >