Search Results

Search found 11991 results on 480 pages for 'cedric copy'.

Page 390/480 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• Why does the .NET tab in the 'Add Reference' dialog in Visual Studio not list the contents of the GA

  - by abroun

  Duplicate of: Getting assemblies to show in the .NET tab of Add Reference So, I'm using Visual C# 2008 Express Edition and I've just been on a bit of a detour as I found out that my assumption that the .NET tab of the 'Add Reference' dialog lists the contents of the GAC was incorrect. This was a bit of a problem for me as the assembly that I wanted to reference from my project was only available in the GAC. (It was Microsoft.XNA.Framework v2.0 obtained from the XNA 2.0 redistributalbe and as far as I could see it installed only into the GAC). I worked round the problem by setting the reference to Microsoft.XNA.Framework manually in the .csproj file and then getting a copy of the dll out of the cache. I was then able to create a directory for the DLL, add it to Visual Studio's list of assembly directories in the registry and then voila! I could see it in the .NET tab. This all seems like a bit of a faff to me and I don't think that my initial assumption (that the .NET tab shows the contents of the GAC) was that unreasonable or would be that uncommon. Can someone who knows more than me tell me why the contents of the GAC aren't shown? The documentation just says that they are not, but is there a good reason? is there actually a way to get the entire contents of the GAC to be listed? A tick box I've missed somewhere? Any info much appreciated.

  Read the article

• gdb reverse debugging error

  - by Werner

  Hi, i started to try reverse debugging with gdb 7, followin the tutorial: http://www.sourceware.org/gdb/wiki/ProcessRecord/Tutorial and I thought, great! Then I started to debug a real program which gives an error at the end. So I run it with gdb, and I put a breakpoint just before the place I think the error appears. Then I type "record" in order to start to recrd actions for future reverse-debugging. But after some steps I get Process record doesn't support instruction 0xf0d at address 0x2aaaab4c4b4e. Process record: failed to record execution log. Program received signal SIGTRAP, Trace/breakpoint trap. 0x00002aaaab4c4b4e in memcpy () from /lib64/libc.so.6 (gdb) n Single stepping until exit from function memcpy, which has no line number information. Process record doesn't support instruction 0xf0d at address 0x2aaaab4c4b4e. Process record: failed to record execution log. Program received signal SIGABRT, Aborted. 0x00002aaaab4c4b4e in memcpy () from /lib64/libc.so.6 Before I look at in in detail, I wonder if this feature is still buggy, or if I should start to record from the beginning. Where this "record" error happens, just an object is created as a copy of other: Thanks

  Read the article

• Splitting MS Access Database - Front End Part Location

  - by kristof

  One of the best practices as specified by Microsoft for Access Development is splitting Access application into 2 parts; Front End that hold all the object except tables and the Back End that holds the tables. The msdn page links there to the article Splitting Microsoft Access Databases to Improve Performance and Simplify Maintainability that describes the process in details. It is recommended that in multi user environment the Back End is stored on the server/shared folder while the Front End is distributed to each user. That implies that each time there are any changes made to the front end they need to be deployed to every user machine. My question is: Assuming that the users themselves do not have rights to modify the Front End part of the application what would be the drawbacks/dangers of leaving this on the server as well next to the Back End copy? I can see the performance issues here, but are there any dangers here like possible corruptions etc? Thank you EDIT Just to clarify, the scenario specified in question assumes one Front End stored on the server and shared by users. I understand that the recommendation is to have FE deployed to each user machine, but my question is more about what are the dangers if that is not done. E.g. when you are given an existing solution that uses the approach of both FE and BE on the server. Assuming the the performance is acceptable and the customer is reluctant to change the approach would you still push the change? And why exactly? For example the danger of possible data corruption would definitely be the strong enough argument, but is that the case? It is a part of follow up of my previous question From SQL Server to MS Access 2007

  Read the article

• Can I perform some processing on the POST data before ASP.NET MVC UpdateModel happens?

  - by Domenic

  I would like to strip out non-numeric elements from the POST data before using UpdateModel to update the copy in the database. Is there a way to do this? // TODO: it appears I don't even use the parameter given at all, and all the magic // happens via UpdateModel and the "controller's current value provider"? [HttpPost] public ActionResult Index([Bind(Include="X1, X2")] Team model) // TODO: stupid magic strings { if (this.ModelState.IsValid) { TeamContainer context = new TeamContainer(); Team thisTeam = context.Teams.Single(t => t.TeamId == this.CurrentTeamId); // TODO HERE: apply StripWhitespace() to the data before using UpdateModel. // The data is currently somewhere in the "current value provider"? this.UpdateModel(thisTeam); context.SaveChanges(); this.RedirectToAction(c => c.Index()); } else { this.ModelState.AddModelError("", "Please enter two valid Xs."); } // If we got this far, something failed; redisplay the form. return this.View(model); } Sorry for the terseness, up all night working on this; hopefully my question is clear enough? Also sorry since this is kind of a newbie question that I might be able to get with a few hours of documentation-trawling, but I'm time-pressured... bleh.

  Read the article

• plupload with webpy.

  - by markus

  Hi, i have a problem. I want to upload a file with plupload with the HML5 runtime. This is my html/js code : jQuery(function(){ jQuery("#uploader").pluploadQueue({ // General settings runtimes : 'html5', name : 'file', url : 'http://server.name/addContent', max_file_size : '${maxSize}$_("GB")', }); jQuery('#form_upload_file').submit(function(e) { var uploader = jQuery('#uploader').pluploadQueue(); // Validate number of uploaded files if (uploader.total.uploaded == 0) { // Files in queue upload them first if (uploader.files.length > 0) { // When all files are uploaded submit form uploader.bind('UploadProgress', function() { if (uploader.total.uploaded == uploader.files.length) jQuery('#form_upload_file').submit(); }); uploader.start(); } else alert('You must at least upload one file.'); e.preventDefault(); } }); }); <form id="form_upload_file" action="#" method="POST"> <div id="uploader"></div> <input type="hidden" name="token" value="token" /> <input type="hidden" name="idUser" value="$idUser" /> </form> So, when i click in the button to upload(the submit() method is not called), it does an OPTIONS HTTP request to my server so i don't know what i must do to save the file? this is my webpy code : def OPTIONS(self): web.header('Content-type', 'text/plain: charset=utf-8') web.header('Cache-Control', 'no-store, no-cache, must-revalidate') web.header('Cache-Control', 'post-check=0, pre-check=0', False) web.header('Pragma', 'no-cache') def POST(self): input = web.input(_unicode=False, file={})#on récupère les input self.copy(input.file.file) etc. any idea ? thanks.

  Read the article

• Extension Method for copying properties form object to another, with first attempt

  - by James

  Hi All, Im trying to write an extension method that I can use to copy values from one object property to another object of a different type, as long as the property names and types match exactly. This is what I have: public static T CopyFrom<T>(this T toObject, object fromObject) { var fromObjectType = fromObject.GetType(); var fromProperties = fromObjectType.GetProperties(); foreach (PropertyInfo toProperty in toObject.GetType().GetProperties()) { PropertyInfo fromProperty = fromObjectType.GetProperty(toProperty.Name); if (fromProperty != null) // match found { // check types var fromType = fromProperty.PropertyType.UnderlyingSystemType; var toType = toProperty.PropertyType.UnderlyingSystemType; if (toType.IsAssignableFrom(fromType)) { toProperty.SetValue(toObject, fromProperty.GetValue(fromObject, null), null); } } } return toObject; } This is working great for non boxed types, but Nullable<T> returns false when I call toType.IsAssignableFrom(fromType) because its type is Nullable<T> and is not the underlying type T. I read here that GetType() should unbox the Nullable<T> so it returns T but if I call that on PropertyInfo.PropertyType I get ReflectedMemberInfo and not the type T im looking for. I think im missing something obvious here, so I thought I would throw it open to SO to get some advice. Anyone have any ideas? Thanks, Jamee

  Read the article

• Convert float to decimal in Informix

  - by prabhu

  I have a table with a column of type decimal. There is a ESQL/C structure that represents the table. It has a member of type decimal. I also have a normal C structure for equivalent for the same table. The type of the above mentioned field is a float. Since we use memcpy to copy data to and from ESQL/C structure to C structure, there is an issue with decimal to float conversion. When I searched the Informix ESQL/C Programmer's manual, I couldn't find any function that can do this. Google search led me to the deccvflt() function. This function converts from a float to a decimal type. Though I couldn't find this function listed in the manual, I see the declarations in decimal.h. Are these functions still recommended to be used? Alternatively, I was also thinking about using the decimal type in the C structure also, as it happens to be a C structure. This way, I can still use the memcpy right? Please share your thoughts. IBM Informix Dynamic Server Version 11.50.FC3 Thanks, prabhu

  Read the article

• Connection reset when calling disconnect() using enterprisedt's ftp java framework

  - by Frederik Wordenskjold

  I'm having trouble disconnecting from a ftp-server, using the enterprisedt java ftp framework. I can simply not call disconnect() on a FileTransferClient object without getting an error. I do not do anything, besides connecting to the server, and then disconnecting: // create client log.info("Creating FTP client"); ftp = new FileTransferClient(); // set remote host log.info("Setting remote host"); ftp.setRemoteHost(host); ftp.setUserName(username); ftp.setPassword(password); // connect to the server log.info("Connecting to server " + host); ftp.connect(); log.info("Connected and logged in to server " + host); // Shut down client log.info("Quitting client"); ftp.disconnect(); log.info("Example complete"); When running this, the log reads: INFO [test] 28 maj 2010 16:57:20.216 : Creating FTP client INFO [test] 28 maj 2010 16:57:20.263 : Setting remote host INFO [test] 28 maj 2010 16:57:20.263 : Connecting to server x INFO [test] 28 maj 2010 16:57:20.979 : Connected and logged in to server x INFO [test] 28 maj 2010 16:57:20.979 : Quitting client ERROR [FTPControlSocket] 28 maj 2010 16:57:21.026 : Read failed ('' read so far) And the stacktrace: com.enterprisedt.net.ftp.ControlChannelIOException: Connection reset at com.enterprisedt.net.ftp.FTPControlSocket.readLine(FTPControlSocket.java:1029) at com.enterprisedt.net.ftp.FTPControlSocket.readReply(FTPControlSocket.java:1089) at com.enterprisedt.net.ftp.FTPControlSocket.sendCommand(FTPControlSocket.java:988) at com.enterprisedt.net.ftp.FTPClient.quit(FTPClient.java:4044) at com.enterprisedt.net.ftp.FileTransferClient.disconnect(FileTransferClient.java:1034) at test.main(test.java:46) It should be noted, that I without problems can connect, and do stuff with the server, like getting a list of files in the current working directory. But I cant, for some reason, disconnect! I've tried using both active and passive mode. The above example is by the way copy/pasted from their own example. I cannot fint ANYTHING related to this by doing a Google-search, so I was hoping you have any suggestions, or experience with this issue.

  Read the article

• Python: OSX Library for fast full screen jpg/png display

  - by Parand

  Frustrated by lack of a simple ACDSee equivalent for OS X, I'm looking to hack one up for myself. I'm looking for a gui library that accommodates: Full screen image display High quality image fit-to-screen (for display) Low memory usage Fast display Reasonable learning curve (the simpler the better) Looks like there are several choices, so which is the best? Here are some I've run across: PyOpenGL PyGame PyQT wxpython I don't have any particular experience with any of these, nor any strong desire to become an expert - I'm looking for the simplest solution. What do you recommend? [Update] For those not familiar with ACDSee, here's what it does that I care about: Simple list/thubmnail display of images in a directory Sort by name/size/type Ability to view images full screen Single-key delete while viewing full screen Move to next/previous image while viewing full screen Ability to select a group of images for: move to / copy to directory delete resize ACDSee has a bunch of niceties as well, such as remembering directories you've moved images to in the past, remembering your resize settings, displaying the total size of the images you've selected, etc. I've tried most of the options I could find (including Xee) and none of them quite get there. Please keep in mind that this is a programming/library question, not a criticism of any of the existing tools.

  Read the article

• Creating a content management system for dedicated use

  - by whitstone86

  I've been trying to create a specialised CMS, as none of the current open-source ones fit my needs for this project. I did my research on Google, tried multiple times but haven't got very far with this project. I'm trying to create a CMS for a TV/episode guide which is similar to this: (for some that don't have the :// just copy-and-paste and add it after http in the URL) http library.digiguide.com/lib/programmenextshowing/Police%2C+Camera%2C+Action!-12578 (one such example) - where records expire and delete from the database after expiration. This is the design I'm trying to emulate: http library.digiguide.com/lib/programme/24-84241/Drama/ - the programme http://library.digiguide.com/lib/episode/Under+Surveillance-714873 - a typical episode, could use .htaccess to remove php from name http library.digiguide.com/lib/programmenextshowing/24-84241 - paginated episode display (using script that I found in search here possibly) I don't have access to cron job as it's on Windows/Apache, so that's out the question for this one. I'm not sure how to go about this successfully, anyone got any advice? (Note:Although the linked site runs in ASP.NET, it's the design and feel of it I'm trying to emulate, except in PHP. I've managed to emulate that site's design, but with my own tweaks to it.)

  Read the article

• Svn repository split problem

  - by Tuminoid

  I want to split a directory from a large Subversion repository to a repository of its own, and keep the history of the files in that directory. I tried the regular way of doing it first svnadmin dump /path/to/repo > largerepo.dump cat largerepo.dump | svndumpfilter include my/directory >mydir.dump but that does not work, since the directory has been moved and copied over the years and files have been moved into and out of it to other parts of the repository. The result is a lot of these: svndumpfilter: Invalid copy source path '/some/old/path' Next thing I tried is to include those /some/old/path as they appear and after a long, long list of files and directories included, the svndumpfilter completes, BUT importing the resulting dump isn't producing the same files as the current directory has. So, how do I properly split the directory from that repository while keeping the history? EDIT: I specifically want trunk/myproj to be the trunk in a new repository PLUS have the new repository include none of the other old stuff, ie. there should not be possibility for anyone to update to old revision before the split and get/see the files. The svndumpfilter solution I tried would achieve exactly that, sadly its not doable since the path/files have been moved around. The solution by ng isn't accetable since its basically a clone+removal of extras which keeps ALL the history, not just relevant myproj history. BUMP C'moon, there must be someone who definitely knows if this is doable or not, and how!

  Read the article

• How to use boost::bind with non-copyable params, for example boost::promise ?

  - by zhengxi

  Some C++ objects have no copy constructor, but have move constructor. For example, boost::promise. How can I bind those objects using their move constructors ? #include <boost/thread.hpp> void fullfil_1(boost::promise<int>& prom, int x) { prom.set_value(x); } boost::function<void()> get_functor() { // boost::promise is not copyable, but movable boost::promise<int> pi; // compilation error boost::function<void()> f_set_one = boost::bind(&fullfil_1, pi, 1); // compilation error as well boost::function<void()> f_set_one = boost::bind(&fullfil_1, std::move(pi), 1); // PS. I know, it is possible to bind a pointer to the object instead of // the object itself. But it is weird solution, in this case I will have // to take cake about lifetime of the object instead of delegating that to // boost::bind (by moving object into boost::function object) // // weird: pi will be destroyed on leaving the scope boost::function<void()> f_set_one = boost::bind(&fullfil_1, boost::ref(pi), 1); return f_set_one; }

  Read the article

• Installing ImageMagick extension with php/windows

  - by Jason

  Running PHP Version 5.2.5 on Windows Server 2003 with IIS. Have virtually an identical server where we were able to install ImageMagick with no issues. It's running exactly the same version of php. Used the following steps to install, but it just won't seem to work on this server. ImageMagick itself is installed but php won't load the extension. We've spent hours trying to get the extension installed. It just won't show up in phpinfo(). INSTALL STEPS TAKEN* To install IMagick on windows xp (php 5.2.x) 1.) download and install ImageMagick-6.5.8-7 Q16-windows-dll.exe http://www.imagemagick.org/download/binaries/ ImageMagick-6.5.8-7-Q16-windows-dll.exe 2.) download php_imagick_dyn-Q16.dll from: http://valokuva.org/outside-blog-content/ imagick-windows-builds/080709/ copy dll to [PHP]/extension dir and rename it to php_imagick.dll 3.) You have to edit your php.ini file and add new extension "extension=php_imagick.dll" 4.) Save ini file and restart apache server. (If necessary, restart your windows) 5.) phpinfo() should show imagick enabled.

  Read the article

• Use external datasource with NUnit's TestCaseAttribute

  - by Hamman359

  Is it possible to get the values for a TestCaseAttribute from an external data source such as an Excel Spreadsheet, CSV file or Database? i.e. Have a .csv file with 1 row of data per test case and pass that data to NUnit one at a time. Here's the specific situation that I'd like to use this for. I'm currently merging some features from one system into another. This is pretty much just a copy and paste process from the old system into the new one. Unfortunately, the code being moved not only does not have any tests, but is not written in a testable manner (i.e. tightly coupled with the database and other code.) Taking the time to make the code testable isn't really possible since its a big mess, i'm on a tight schedule and the entire feature is scheduled to be re-written from the ground up in the next 6-9 months. However, since I don't like the idea of not having any tests around the code, I'm going to create some simple Selenium tests using WebDriver to test the page through the UI. While this is not ideal, it's better than nothing. The page in question has about 10 input values and about 20 values that I need to assert against after the calculations are completed, with about 30 valid combinations of values that I'd like to test. I already have the data in a spreadsheet so it'd be nice to simply be able to pull that out rather than having to re-type it all in Visual Studio.

  Read the article

• Maven String Replace of Text Web Resources

  - by Jaco van Niekerk

  I have a Maven web application with text files in src/main/webapp/textfilesdir As I understand it, during the package phase this textfilesdir directory will be copied into the target/project-1.0-SNAPSHOT directory, which is then zipped up into a target/project-1.0-SNAPSHOT.war Problem Now, I need to do a string replacement on the contents of the text files in target/project-1.0-SNAPSHOT/textfilesdir. This must then be done after the textfilesdir is copied into target/project-1.0-SNAPSHOT, but prior to the target/project-1.0-SNAPSHOT.war file being created. I believe this is all done during the package phase. How can a plugin (potentially maven-antrun-plugin), plug into the package phase to do this. The text files don't contain properties, like ${property-name} to filter on. String replacement is likely the only option. Options Modify the text files after the copy into target/project-1.0-SNAPSHOT directory, yet prior to the WAR creation. After packaging, extract the text files from WAR, modify them, and add them back into the WAR. I'm thinking there is another option here I'm missing. Thoughts anyone?

  Read the article

• exec problem in sql 2005

  - by IordanTanev

  Hi, i have the situation where i have two databases whith same structure. The first have some data in its datatables. I need to create a script that will transfer the data from the first database to the second. I have created this script. DECLARE @table_name nvarchar(MAX), @query nvarchar(MAX) DECLARE @table_cursor CURSOR SET @table_cursor = CURSOR FAST_FORWARD FOR Select TABLE_NAME FROM INFORMATION_SCHEMA.TABLES OPEN @table_cursor FETCH NEXT FROM @table_cursor INTO @table_name WHILE @@FETCH_STATUS = 0 BEGIN SET @query = 'INSERT INTO ' + @table_name + ' SELECT * FROM MyDataBase.dbo.' + @table_name print @query exec @query FETCH NEXT FROM @table_cursor INTO @table_name END CLOSE @table_cursor DEALLOCATE @table_cursor The problem is that when i run th script the "print @query" statement prints statement like this INSERT INTO table SELECT * FROM MyDataBase.dbo.table When i copy this and run it from Management studio it works fine. But when the script trys to run it with exec i get this error Msg 911, Level 16, State 1, Line 21 Could not locate entry in sysdatabases for database 'INSERT INTO table SELECT * FROM MPDEV090314'. No entry found with that name. Make sure that the name is entered correctly. Hope someone can tell me whot is wront with this. Best Regards, Iordan Tanev

  Read the article

• Does somebody know something about Flash-CS5' "multiple copies" bug?

  - by Slav

  I'm, generally, complaining, not asking, but if somebody will be able (Adobe isn't) to help - it will be perfect. I use Flash-CS5 IDE to compose .swc files to import it, then, into FlashDevelop. Evetyrhing works fine until SOMETIMES. About each 10th "Ctrl+S" (save) click Flash-CS5 duplicates ALL images (loaded .bmp, .jpg, .png... files) and names them like "Copy ..." where "..." is incrementing number. Furhtermore, Flash-CS5 creates duplications of some layers - other layers have duplications of items which put on them. Restoring project's state to previous (not copied) state - is the hell. This bug is not reproducible but it happens each 2 hours or so - both right after project's opening and after several hours of work. It happens on different machines - I know at least 5 people which told me that they also run into this issue and do not know how to escape it. Did somebody experienced it? Does somebody know how to handle it?

  Read the article

• LINQ to SQL and DataPager

  - by Jonathan S.

  I'm using LINQ to SQL to search a fairly large database and am unsure of the best approach to perform paging with a DataPager. I am aware of the Skip() and Take() methods and have those working properly. However, I'm unable to use the count of the results for the datapager, as they will always be the page size as determined in the Take() method. For example: var result = (from c in db.Customers where c.FirstName == "JimBob" select c).Skip(0).Take(10); This query will always return 10 or fewer results, even if there are 1000 JimBobs. As a result, the DataPager will always think there's a single page, and users aren't able to navigate across the entire result set. I've seen one online article where the author just wrote another query to get the total count and called that. Something like: int resultCount = (from c in db.Customers where c.FirstName == "JimBob" select c).Count(); and used that value for the DataPager. But I'd really rather not have to copy and paste every query into a separate call where I want to page the results for obvious reasons. Is there an easier way to do this that can be reused across multiple queries? Thanks.

  Read the article

• csc.exe not found error

  - by pokrate

  I have installed a fresh copy of windows xp 2002 with SP2, and then VS.net 2008 enterprise edition. I am trying to build a simplest possible web application, and its not compiling giving error csc.exe not found. I googled a lot, and spot the problem in the following section in web.config : <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" warningLevel="4" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> But if i remove the csharp compiler section , and then compile, it compiles fine with vb compiler section. And if I change the value from v3.5 to v2.0 in the of csharp section, then also it compiles fine. But then all my Linq Queries are not recognized by the compiler. But System.Linq and all classes present in it are accessible in the code. Please help in this weird behavior.

  Read the article

• Newbie T-SQL dynamic stored procedure -- how can I improve it?

  - by Andy Jones

  I'm new to T-SQL; all my experience is in a completely different database environment (Openedge). I've learned enough to write the procedure below -- but also enough to know that I don't know enough! This routine will have to go into a live environment soon, and it works, but I'm quite certain there are a number of c**k-ups and gotchas in it that I know nothing about. The routine copies data from table A to table B, replacing the data in table B. The tables could be in any database. I plan to call this routine multiple times from another stored procedure. Permissions aren't a problem: the routine will be run by the dba as a timed job. Could I have your suggestions as to how to make it fit best-practice? To bullet-proof it? ALTER PROCEDURE [dbo].[copyTable2Table] @sdb varchar(30), @stable varchar(30), @tdb varchar(30), @ttable varchar(30), @raiseerror bit = 1, @debug bit = 0 as begin set nocount on declare @source varchar(65) declare @target varchar(65) declare @dropstmt varchar(100) declare @insstmt varchar(100) declare @ErrMsg nvarchar(4000) declare @ErrSeverity int set @source = '[' + @sdb + '].[dbo].[' + @stable + ']' set @target = '[' + @tdb + '].[dbo].[' + @ttable + ']' set @dropStmt = 'drop table ' + @target set @insStmt = 'select * into ' + @target + ' from ' + @source set @errMsg = '' set @errSeverity = 0 if @debug = 1 print('Drop:' + @dropStmt + ' Insert:' + @insStmt) -- drop the target table, copy the source table to the target begin try begin transaction exec(@dropStmt) exec(@insStmt) commit end try begin catch if @@trancount > 0 rollback select @errMsg = error_message(), @errSeverity = error_severity() end catch -- update the log table insert into HHG_system.dbo.copyaudit (copytime, copyuser, source, target, errmsg, errseverity) values( getdate(), user_name(user_id()), @source, @target, @errMsg, @errSeverity) if @debug = 1 print ( 'Message:' + @errMsg + ' Severity:' + convert(Char, @errSeverity) ) -- handle errors, return value if @errMsg <> '' begin if @raiseError = 1 raiserror(@errMsg, @errSeverity, 1) return 1 end return 0 END Thanks!

  Read the article

• How to I display results of phpcs in VIM?

  - by Matt

  I am presently trying to use PHP Codesniffer (PEAR) in vim for PHP Files. I have found 2 sites that give code to add into the $HOME/.vim/plugin/phpcs.vim file. I have added the code and I "think" it is working, but I cannot see the results, I only see one line at the very bottom of vim that says (1 of 32) but I cannot see any of the 32 errors. Here is my .vimrc file " Backup Options -> Some People may not want this... it generates extra files set backup " Enable Backups set backupext=.bak " Add .bak extention to modified files set patchmode=.orig " Copy original file to with .orig extention Before saving. " Set Tabs and spacing for PHP as recomended by PEAR and Zend set expandtab set shiftwidth=4 set softtabstop=4 set tabstop=4 " Set Auto-indent options set cindent set smartindent set autoindent " Show lines that exceed 80 characters match ErrorMsg '\%80v.\+' " Set Colors set background=dark " Show a status bar set ruler set laststatus=2 " Set Search options highlight, and wrap search set hls is set wrapscan " File Type detection filetype on filetype plugin on " Enable Spell Checking set spell " Enable Code Folding set foldenable set foldmethod=syntax " PHP Specific options let php_sql_query=1 " Highlight sql in php strings let php_htmlInStrings=1 " Highlight HTML in php strings let php_noShortTags=1 " Disable PHP Short Tags let php_folding=1 " Enable Ability to FOLD html Code I have tried 2 different versions of phpcs.vim, and I get the same results for both: Version 1 (found at: VIM an a PHP IDE) function! RunPhpcs() let l:filename=@% let l:phpcs_output=system('phpcs --report=csv --standard=YMC '.l:filename) " echo l:phpcs_output let l:phpcs_list=split(l:phpcs_output, "\n") unlet l:phpcs_list[0] cexpr l:phpcs_list cwindow endfunction set errorformat+=\"%f\"\\,%l\\,%c\\,%t%*[a-zA-Z]\\,\"%m\" command! Phpcs execute RunPhpcs() Version 2: (found at Integrated PHP Codesniffer in VIM ) function! RunPhpcs() let l:filename=@% let l:phpcs_output=system('phpcs --report=csv --standard=YMC '.l:filename) let l:phpcs_list=split(l:phpcs_output, "\n") unlet l:phpcs_list[0] cexpr l:phpcs_list cwindow endfunction set errorformat+="%f"\\,%l\\,%c\\,%t%*[a-zA-Z]\\,"%m" command! Phpcs execute RunPhpcs() Both of these produce identical results. phpcs is installed on my system, and I am able to generate results outside of vim. Any help would be appreciated I am just learning more about vim...

  Read the article

• HttpUtility.HtmlDecode driving me crazy!!!!

  - by Savvas Sopiadis

  Hi everybody! This situation is driving me crazy!!: the following snippet does not work (as i should) ... string preResult = doc.DocumentNode.SelectSingleNode("//textarea[@name='utrans']").InnerText return HttpUtility.HtmlDecode(preResult); ... The first line assigns a value (e.g.) "&lt;b&gt; Dummy value: &lt;/ b&gt; into preResult (that's expected). BUT the next line gives AGAIN the same value!!! But it should return "<b> Dummy value: </ b>". Debugging these lines i thought to copy and paste the value directly into HttpUtility.HtmlDecode() and guess what...it worked!!! I got the expected value! Of course this is useless, but it proves something weird is going on...what?!! Has anybody faced the same situation again? (dev.env. VS2008,.NET3.5SP1) Thanks in advance

  Read the article

• How can I sync files in two different git repositories (not clones) and maintain history?

  - by brian d foy

  I maintain two different git repos that need to share some files, and I'd like the commits in one repo to show up in the other. What's a good way to do that for ongoing maintenance? I've been one of the maintainers of the perlfaq (Github), and recently I fell into the role of maintaining the Perl core documentation, which is also in git. Long before I started maintaining the perlfaq, it lived in a separate source control repository. I recently converted that to git. Periodically, one of the perl5-porters would sync the shared files in the perlfaq repo and the perl repo. Since we've switched to git, we'e been a bit lazy converting the tools, and I'm now the one who does that. For the time being, the two repos are going to stay separate. Currently, to sync the FAQ for a new (monthly) release of perl, I'm almost ashamed to say that I merely copy the perlfaq*.pod files in the perlfaq repo and overlay them in the perl repo. That loses history, etc. Additionally, sometimes someone makes a change to those files in the perl repo and I end up overwriting it (yes, check git diff you idiot!). The files do not have the same paths in the repo, but that's something that I could change, I think. What I'd like to do, in the magical universe of rainbows and ponies, is pull the objects from the perlfaq repo and apply them in the perl repo, and vice-versa, so the history and commit ids correspond in each. Creating patches works, but it's also a lot work to manage it Git submodules seem to only work to pull in the entire external repo I haven't found something like svn's file externals, but that would work in both directions anyway I'd love to just fetch objects from one and cherry-pick them in the other What's a good way to manage this?

  Read the article

• jquery question for events

  - by OM The Eternity

  I have to copy the text from one text box to another using checkbox through jquery I have applied jquery event in my code, it works partially correct.. code is as follows: <html> <head> <script src="js/jquery.js" ></script> </head> <body> <form> <input type="text" name="startdate" id="startdate" value=""/> <input type="text" name="enddate" id="enddate" value=""/> <input type="checkbox" name="checker" id="checker" /> </form> <script> $(document).ready(function(){ $("#startdate").change(function(o){ if($("#checker").is(":checked")){ $("#enddate").val($("#startdate").val()); } }); }); </script> </body> </html> this code works as follows, I always have checkbox checked by default hence whenever i insert the start date and then tab, the start date gets copied to enddate. My Problem but now if uncheck the checkbox and change the start date and then recheck the check box, the start date is not copied, Now what should be done in this situation.. please help me....

  Read the article

• Flex 3 - Saving an image of a component

  - by Emma

  Im currently trying to work the imageSnapshot function in flex. Ive been looking hard but I cant seem to find a solution to my problem. I wish to take a screenshot of one of my components, to capture the final output of my program, since a plain "printscreen" cuts off some of the output due to it scrolling. My current code looks like - <mx:ApplicationControlBar dock="true"> <mx:Button label="Take snapshot of Profile" click="takeSnapshot();" /> </mx:ApplicationControlBar> Which when called does - private function takeSnapshot(even:Event=null):void { var imageSnap:ImageSnapshot = ImageSnapshot.captureImage(viewstack1); Now i think this is taking the image of the viewstack which I want... But Im stumped on what to do from here! Is it not possible to now just copy the image to the clipboard, or produce a new window in my browser with the entire image inside? If anyone has any other way to do this, suggestions would be wonderful. Thank you for your time.

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >