Search Results

Search found 21640 results on 866 pages for 'local storage'.

Page 390/866 | < Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >

• Move /var directories to to /mnt on an EC2 instance

  - by Geoff Lanotte

  I am trying to work on a standard configuration for a set of EC2 instances running ubuntu 12.04. These servers are going to be primarily web servers for a Ruby on Rails application. When you configure a new large instance, you are given a primary of 8GB and then ephemeral storage of 400 GB that is mounted to /mnt. It seems logical to me to move some directories that have a potential for growth off to the /mnt directory, I was specifically thinking of /var/www and /var/log. My question is two-fold: Is this a good idea or are there pitfalls that I cannot see? If this is a good idea, how should I go about configuring this. I do have the ability to configure new instances and down our old instances. My concern is over long term, doing this in such a way that it prevents downtime. I am a developer with some experience in devops, but mounting drives is something I have not faced before, so explicit directions would be greatly appreciated.

  Read the article

• Server 2003 slow share.

  - by G V

  I am running an 03 box with shares active. When uploading to the share, the speed is average. About 15-20 mbps.. But when you think about it, it is bad because it is a direct connection to a couple machines. When uploading to another server the connection speed is twice that of the direct storage. When uploading s massive folder, 250 GB, the upload will start as normal, but as it progresses it drops in speed. Now it is sitting at around 2-7 Mbps. Any ideas on how i can boost the transfer rate? On a side note, the download speed is great. It is a speed that you would expect from this setup, the main problem is uploading and what is causing the extreme slowness in speeds. Any help would be great.

  Read the article

• Chef command to create new ec2 instance with second ebs volume attached and mounted instead of the default ephemeral volume?

  - by runamok

  We currently use this command to create a new ec2 instance with chef: knife ec2 server create --node-name=prod-apache-1 --availability-zone us-east-1c --image ami-3d4ff254 --distro ubuntu12.04-gems --groups "default" --ssh-key foo --identity-file ~/.ssh/id_rsa --ssh-user ubuntu --flavor m1.small After this command we then run further chef commands to finish provisioning the server. I was wondering if it would be possible while first setting up the instance I wanted a 100 gb volume created and mounted at /mnt and to have the ephemeral storage mounted at /tmp or /mnt-ephemeral instead. If not what further commands in chef would you advise running? I know how to do this via the aws console and can probably figure out how to do it via the ec2 command line tools but I am knew to chef and a bit overwhelmed.

  Read the article

• How to find an XPath query to Element/Element without namespaces (XmlSerializer, fragment)?

  - by Veksi

  Assume this simple XML fragment in which there may or may not be the xml declaration and has exactly one NodeElement as a root node, followed by exactly one other NodeElement, which may contain an assortment of various number of different kinds of elements. <?xml version="1.0"> <NodeElement xmlns="xyz"> <NodeElement xmlns=""> <SomeElement></SomeElement> </NodeElement> </NodeElement> How could I go about selecting the inner NodeElement and its contents without the namespace? For instance, "//*[local-name()='NodeElement/NodeElement[1]']" (and other variations I've tried) doesn't seem to yield results. As for in general the thing that I'm really trying to accomplish is to Deserialize a fragment of a larger XML document contained in a XmlDocument. Something like the following var doc = new XmlDocument(); doc.LoadXml(File.ReadAllText(@"trickynodefile.xml")); //ReadAllText to avoid Unicode trouble. var n = doc.SelectSingleNode("//*[local-name()='NodeElement/NodeElement[1]']"); using(var reader = XmlReader.Create(new StringReader(n.OuterXml))) { var obj = new XmlSerializer(typeof(NodeElementNodeElement)).Deserialize(reader); I believe I'm missing just the right XPath expression, which seem to be rather elusive. Any help much appreciated!

  Read the article

• Resized NTFS partition, now it wont mount.

  - by H4Z3Y

  I have had a 1.5TB drive used as an external for 6 months or so, then I decided to put it in my linux server for network storage. ntfs was being crazy inefficient so I wanted to change the filesystem to ext4. I used the ntfsresize command to reduce the partition to 650GB and that took abour 2 hours, then I deleted all of the entries in fstab like a guide told me too and created a new one the size of the ntfs partition, or, 650GB. after I modified fstab the ntfs partition would no longer mount and when plugging it in to windows it says "This Hard Drive needs to be formatted". any ideas on how I can recover the data off of the drive? I have 600GB of free space on a different drive so I just need some way of copying them off.

  Read the article

• Can a RAID 0 disk be rebuilt

  - by Rogue

  Recently one of the hard drives of one of my RAID 0 configuration gave an error. What do I do now I'm hoping that I can replace that faulty disk with a new hard drive and that the RAID can rebuild itself. (using Intel Matrix Storage Console) Is this possible? Though I doubt it. Is there anyway that I can rebuild the RAID? or have I lost all the matter on it. TECH INFO: I have a software raid on an Intel DG965WH motherboard and the current operating system is Windows

  Read the article

• Using custom detectors with FindBugs Maven plugin

  - by Lóránt Pintér

  I have a nice JAR of some custom FindBugs detectors I'd like to use with the FindBugs Maven plugin. There is a way to do this with the plugin via the <pluginList> configuration parameter, but that only accepts local files, URLs, or resources. The only way I found for doing so is to somehow copy my JAR to a local file (maybe via the Dependency plugin) and then configure the FindBugs plugin something like this: <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>findbugs-maven-plugin</artifactId> <version>2.3.1</version> <configuration> <pluginList>${project.build.directory}/my-detectors.jar</pluginList> </configuration> </plugin> But this is not very flexible. Is there a way to use Maven's dependency management features together with FindBugs' plugins? I'd like to use something like this: <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>findbugs-maven-plugin</artifactId> <dependencies> <dependency> <groupId>com.lptr.findbugs</groupId> <artifactId>my-detectors</artifactId> <version>1.0</version> </dependency> </dependencies> </plugin> ...but this simply overrides the core FindBugs detectors.

  Read the article

• Can a S3 mount be used as the document root for Apache?

  - by Hesse

  Has anyone been successful in having their DocumentRoot reside on an S3 mount (using s3fs)? I currently have a mounted bucket at /mnt/s3. I can read and write files to it no problem. In my httpd.conf I have DocumentRoot "/mnt/s3". When I restart Apache I get the error "DocumentRoot must be a directory". Has anyone tried something similar. My goal is to have a shared storage space so my nodes can scale easily and access the same document root. Thanks

  Read the article

• Making an SSD drive the primary boot/system drive

  - by David Ebbo

  [Not much of a hardware guy, so please excuse my ignorance :)] I just ordered an HP Pavilion Elite HPE-450t (desktop), which came with Win7 installed on the hard drive, using two partitions (C: and D:). Separately, I bought a 128GB SSD that I intend to use as my system drive. I got it in there and connected it, and right now, it's the J: drive (which was the first letter available in disk manager). My goal is for the SSD to get a clean OS install be the C: drive, and to clean out the other hard drive and make it D: (for misc data storage) Question #1: the motherboard has two SATA plugs. Does it matter which one I use for which drive? Question #2: what's the right way to install Win7 on the SSD in a way that it ends up being the C: drive? Do I need to switch some things around in the current Win7 that came with it, are can I do all that while installing Win7 on the SSD?

  Read the article

• Two "Calendar" entries listed on iPad - can't write to calendar using EventKit

  - by Neal

  My iOS app integrates with the device's calendar. On my iPad when I view the calendar app and tap the Calendars button on the top left to choose which calendars to show I see one entry named "Calendar". In my app when I loop through available calendars per the code below "Calendar" is listed twice. One is CalDAV for the type, the other is Local. I'm unable to create calendar entries in one of them, I believe the "Local" one, not sure why. Why do I see "Calendar" listed twice when I do NOT see it listed twice in the iCal app? public static List<string> Calendars { get { var calendars = new List<string>(); var ekCalendars = EventStore.Calendars; if (ekCalendars != null && ekCalendars.Length > 0) { foreach (EKCalendar cal in ekCalendars) { if (cal.AllowsContentModifications) calendars.Add(cal.Title); } calendars.Sort(); } return calendars; } }

  Read the article

• USB Format Error

  - by Dan Finan

  I'm having a real headache trying to reformat a USB drive. Initially it had a 200mb EFI partition and it caused the drive to disappear altogether. Since then I ran the CMD and wiped the disk using 'diskpart'. It took a few attempts but it finally cleaned the drive. Since then it has reappeared under (:E) however I am unable to access the drive and Windows is preventing me from reformatting it. I am just presented with 'Windows was unable to complete the format'. It's now acting like a CD drive instead of removable storage. I've tried going through Disk Management and I'm presented with the same error. I've removed the USB controllers from Device Manager - when the drive is connected again it re-installs the drivers and acts the same way. Any help given will be greatly appreciated, thank you. (Windows 7 machine)

  Read the article

• Develop multiple very similar projects at once

  - by Raveren

  I am developing a semi-complicated site that is available in several countries at once. Much effort has been put in to make the code bases as similar as possible to one another and ultimately only the config file and some representational data will differ between them. Each project has its own SVN repository which maps directly to a live test site. That part is handled by the IDE we use to work. Now I am in need to create a some sort of system to keep all these projects in sync. The best theoretical solution so far is to create a local hook script that would fire on committing and Merge the committed files from the project that is being committed to all other projects Optionally upload them to the live site, replacing previous files The first problem is that I don't know how I would do the merging - I guess it would be like applying a SVN patch or something. The second is if I do not want to upload the changes to the live server, how would I go about synching the live and local code bases (replace older files?). I am posting this question, not going through the potentially huge trouble of solving the aforementioned problems myself is that I believe this is a pretty common situation and someone would already have a solution and others may benefit from the answers in the future. Lastly, I'm on windows7, develop PHP and use tortoiseSVN.

  Read the article

• Git rebase and semi-tracked per-developer config files.

  - by dougkiwi

  This is my first SO question and I'm new-ish to Git as well. Background: I am supposed to be the version control guru for Git in my group of about 8 developers. As I don't have a lot of Git experience, this is exciting. I decided we need a shared repository that would be the authoritative master for the production code and the main meeting-point for the development code. As we work for a corporation, we really do need to show an authoritive source for the production code at least. I have instructed the developers to pull-rebase when pulling from the shared repository, then push the commits that they want to share. We have been running into problems with a particular type of file. One of these files, which I currently assume is typical of the problem, is called web.config. We want a version-controlled master web.config for devs to clone, but each dev may make minor edits to this file that they wish to locally save but not share. The problem is this: how do I tell git not to consider local changes or commits to this file to be relevent for rebasing and pushing? Gitignore does not seem to solve the problem, but maybe that's because I put web.config into .gitignore too late? In some simple situations we have stacked local changes, rebased, pushed, and popped the stack, but that doesn't seem to work all of the time. I haven't picked up the pattern quite yet. The published documentation on pull --rebase tends to deal with simplier situations. Or do I have the wrong idea entirely? Are we misusing Git? Dougkiwi

  Read the article

• Error in FireFox Loading Images

  - by Brian

  Hello, Details of the app are: ASP.NET project, local web server, hosted in IIS locally, using latest FireFox, uses forms authentication. I'm getting a logon user name/pwd box when trying to access my local web server. Using the net panel in firebug, I see the issue is with an animated GIF, showing up as 401 unauthorized. I check the details and this is what I see for this URL: http://localhost/<virtual>/Images/loading.gif I'm getting the following: Response Headers: Server Microsoft-IIS/5.1 Date Thu, 17 Jun 2010 19:02:58 GMT WWW-Authenticate Negotiate NTLM Connection close Content-Length 4046 Content-Type text/html Request headers: Host localhost User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729; .NET4.0E) Accept image/png,image/*;q=0.8,*/*;q=0.5 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 115 Connection keep-alive Referer <correct referer> Cookie ASP.NET_SessionId=ux4bt345qjz4p3u1wm1zgmez; .ASPXFormsAuth=33F12B444040827B8ABF154EE4EDE43B6CA532432EB846987B355097E00256DF0955C76A37BC593EAA961747BF1CC1D8949FF63C6F2CA69D77213EB15B4EDFAF57A83D9E1F88AB8D821C3A09C07EA2EE; .ASPROLES=qTFrGteJydYAE3118WGXbhJthTDdjdtuQ06t4bYVrM1BwIfcEHU1HhnEcs7TqSOaV-fIN5MH3uO57oNVWXDvrhkZ8gQuURuUk_K0TpoR-DEFXuF953Gl9aIilKAdV211jutMNQmhkt2rdPE2tEhHs3pz953fADxjAOyZl7K-AqNvMk3yqJshhKHhJIf-ALMhWIYlrrKy0WsYznUwh3WCtPfzEBD5XzmXU8HVMJ2-ArLjBISuegvSmxvK1PuXBPhoMRMi9Ynaw6xi9ypGk-R6uN0ljOMCGkB2-20WUlFuP0xWTfac_zCTDT00pbpnyjtygnM-LShOXTrZ_mhoRuXfKYEYSodNihwD6SRr19Nm-8uZ5BQ-W81svM17S2C0vc0FaxtiuAcN_vHcsN1OEJeCuVfRjeqzo9xWEViupP3Vh6aOcCm6yrftgw5x94piuCJO7tCfXjJAw5RVUWDBBWv5gmid171F0k-_XZ0CSv7Gm2Eai1BRfogAqQ_MV3tyPv7XVEyJXRXqYGlf1JpkfTW8S8On4E05v9gx9RcdnKHZebiOZwbP1_ho9nG7pMwXysbhjxtxwZ-zLx-v11_rhZw_i5m7iNcLtt4BbFU-sb_crzMpCKGywHIc452Zp1E0kx1Rfx-2eUnaiLiCfGed-QqelO88NYTpJHttGKEfhFrDgmaIXZPJRtuZ-GrS6t3Vla-8qDAVb1p6ovPwoVT4z4BhQyFsk542gDx-uQDw6D0B6zo7lXfcOjtolUxDcLbETsNlYsexZaxFpRSbw7M1ldwL_k92P9wLPlv9mw4NtyhXKJesMu7GjquZuoBN3hO00AqJEe1tKFFtfrvbE5ZH7uNu7myNdtlxRPe3WZe7qukbqHo1 Pragma no-cache Cache-Control no-cache Any ideas? Thanks.

  Read the article

• df-h command in ubuntu

  - by Esha Sharma

  I am a new user of Ubuntu. When I type df -h in terminal , it gives me list of all storage devices and space usage. In my system I get this. Filesystem Size Used Avail Use% Mounted on /cow 934M 173M 761M 19% / udev 925M 4.0K 925M 1% /dev tmpfs 374M 856K 373M 1% /run /dev/sdb1 7.5G 2.8G 4.8G 37% /cdrom /dev/loop0 1.5G 1.5G 0 100% /rofs tmpfs 934M 16K 934M 1% /tmp none 5.0M 0 5.0M 0% /run/lock none 934M 76K 934M 1% /run/shm /dev/sda 299G 74M 299G 1% /media/q I understand that /dev/sda is my hard drive which is 320 gb(in gib it is 299 and hopefully that is what is being displayed) and /dev/sdb1 is pendrive of 8gb from which I am running the live cd. My question is what are the other folders and what is the physical location of these folders if complete memory is taken by the device dev/sda?

  Read the article

• Routing traffic to a specific NIC in Windows

  - by Stoicpoet

  I added a 10GB NIC to a SQL server which is connected over to a backend storage using ISCSI. I would like to force traffic going to a certain IP address/host to use the 10gb NIC, while all other traffic should continue to use the 1GB NIC. The 10gb nic is configured using a private network. So far I have added a entry in the host file to the host I want to go over the private network and when I ping the host, it does return the private IP, but I'm still finding traffic going to the 1gb pipe. How can I force all traffic to this host to use the 10gb interface? Would the best approach be a static route? 160.205.2.3 is the IP to the 1gb host, I actually want to the traffic to route over an interface assigned 172.31.3.2, which is also defined as Interface 22. That said, would this work? route add 160.205.2.3 mask 255.255.255.255 172.31.3.2 if 22

  Read the article

• Existing tables with binaries to use filestream

  - by user1098487

  I've got a few tables for which I want to use filestream storage. These tables already contain binary data and have rowguids. However at the time they were were created, the tables were not added to a filestream enabled filegroup. What is the best way to have these tables use filestream at this point? Do I need to drop + recreate the tables and migrate the data? Is there an easier way? The database already has filestream enabled and there are other tables which are using them.

  Read the article

• Automatically make or update a copy real-time on another hard drive volume whenever files are saved to a particular folder

  - by mrblint

  Whenever I save or update a file to a particular designated folder on my C:\drive I would like to make or update a copy on my network-attached storage device, ideally saving the copy to the NAS as a version rather than overwriting a copy there, if possible. I have Windows 7 x64 Ultimate. Is there any feature built-in that can accomplish this? It has to be a real copy, not merely a pointer. I'm trying to achieve some redundancy for especially critical documents (in a variety of formats) that change frequently throughout the day. P.S. I am looking for folder-level granularity; I wouldn't want this to happen for every file on the C: volume.

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

• Failed at linking C++ [undefined reference boost::filesystem3 ... ]

  - by Pphax

  i'm having some troubles compiling my work, i'm using ubuntu with g++! i get a lot of these messages: undefined reference to `boost::filesystem3::directory_entry::m_get_status(boost::system::error_code*) const' undefined reference to `boost::filesystem3::path::extension() const' undefined reference to `boost::filesystem3::path::filename() const' undefined reference to `boost::filesystem3::path::filename() const' (etc...) I've searched and found maaany answers but none of those work for me. [...] -lboost_system (/usr/lib/gcc/i686-linux-gnu/4.4.5/../../../../lib/libboost_system.so) -lboost_filesystem (/usr/lib/gcc/i686-linux-gnu/4.4.5/../../../../lib/libboost_filesystem.so) [...] (when linking it shows those two libraries, i'm guessing the error is related to the second one. hax@lap:~$ locate libboost_filesystem.so /home/hax/boost_1_47_0/bin.v2/libs/filesystem/build/gcc-4.4.5/release/threading-multi/libboost_filesystem.so.1.47.0 /home/hax/boost_1_47_0/stage/lib/libboost_filesystem.so /home/hax/boost_1_47_0/stage/lib/libboost_filesystem.so.1.47.0 /usr/lib/libboost_filesystem.so /usr/lib/libboost_filesystem.so.1.42.0 /usr/local/lib/libboost_filesystem.so /usr/local/lib/libboost_filesystem.so.1.47.0 this is the related line on my makefile: -L. -L../bncsutil/src/bncsutil/ -L../StormLib/stormlib/ -L../boost/lib/ -lbncsutil -lpthread -ldl -lz -lStorm -lmysqlclient_r -lboost_date_time -lboost_thread -lboost_system -lboost_filesystem -Wl -t I tried pointing with -L several different places where i saw filesystem.so was located but it didn't work! Can anyone see the problem in those lines? if you need me to put some extra data i'll do it, i'm not seeing the problem :( Thanks :)

  Read the article

• building a home server with a nas appliance [closed]

  - by user51666

  Possible Duplicate: Best way to build home NAS with redundancy I was hoping to get some ideas from folks here. I'm interested in building a home web server with a nas appliance. It would be primarily used for storing pictures, video. I want a networked storage device so I can have multiple devices access it wirelessly as needed from within our home and also I want the option to access from outside the house using a login/pw access. I'm also interested in customizing, building my own web pages as well. Preferably apache. Any preferences? Does anyone have an interesting, neat set up they can share? Thanks!

  Read the article

• Additional Hard Drives for Servers

  - by Abs

  Hello all, I am developing a web app where I will have to save lots of files and I am just trying to work out the directory structure and where things should be saved to. I have had a look at the dedicated server I want to buy and for storage it shows this: 2x 1TB SATA in RAID1 The space is enough but I am guessing this will not be on one hard drive? I will have to save files on one hard drive and when that fills up, I have to use the other? For the Fedora distro - what is the path for the second drive? Is there a primary drive where I will be able to setup my webroot? I am sorry, this is all new to me. It would be great to links and advice on how things actually work when it comes to additional hard drives etc. Thanks all

  Read the article

• Drobo Pro or SAN for backups

  - by PHLiGHT

  I have multiple offices and was thinking of using two Drobo Pros as a storage location for my backups, with one at each site being synced. It seems like on the surface its a cheap alternative to a SAN. Because it will just be used for storing backups I don't think that performance is as big of an issue. Related question. How do you sync your backups from your main location to a remote site. I am using Backup Exec and wondered if I should use a feature in the program or use something like Delta Copy.

  Read the article

• How to configure in crontab with condition statement for checks

  - by chz

  We like to monitor the NAS storage mounted on a linux box. We only like to be notified via mail when the usage exceeds a certain number say 80. We have only seen in linux books where most of them are calling shell scripts at certain times. How do we write inside crontab to only mail us if it exceeds 80 ? Usual eg 2 2 * * * /home/someUser/script.sh 2&1 | mail [email protected] Looking for solution like below 2 2 * * * if [ someNumber "80" ] ; then /home/someUser/script.sh | mail [email protected] Sincerely

  Read the article

• Does the Dell Inspiron 1501 handle more than 4 Gb of RAM?

  - by zillion

  After the following comment on my last question, I'm thinking about upgrading my RAM: I got a 160 GB Scorpio Blue a couple months ago for my 1501. It's nice. That + 2 GB Crucial RAM have rather revived my notebook (meaning a very nice speed and storage boost). I was outgrowing it... – Nathaniel What would be the best choice to add more RAM? I've already got 2 GB, but I'm not sure what their speed is. What are the size, type and speed limitations for RAM on my particular laptop?

  Read the article

< Previous Page | 386 387 388 389 390 391 392 393 394 395 396 397  | Next Page >