Search Results

Search found 32342 results on 1294 pages for 'access insurance'.

Page 393/1294 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

• How to check use of userva boot option on Win 2K3 server

  - by Tim Sylvester

  I have some 32-bit Win2K3 servers running an application that fails now and then apparently due to heap fragmentation. (Process virtual bytes grows, private bytes does not) I do not have access to the source code or build process of this application. I have modified the boot.ini file on one of these servers to include /userva=2560, half way between the normal mode of operation and the /3GB option. Normally it takes weeks to reach the point of failure, but I'd like to see right away whether this has actually had any effect. As I understand it, this option limits the kernel to the remaining address space (1536MB instead of 2048), but does not necessarily give an application the extra address space, depending on the flags in the application's PE header. How can I determine whether the O/S is allowing a particular application, running in production, to access address space above 2GB? Additionally, what's the best way to monitor the system to ensure that the kernel is not starved for address space, and more generally how should I go about finding the optimal value for this setting?

  Read the article

• Is it possible to change error messages for users connecting to network printers?

  - by eric.s

  We are cleaning up our print server (Win XP). To test that printers are no longer really there we have set up some tests. These tests have left us with 176 questionable printers. We have now set Print access to Everyone to Deny. Testing shows this gives the user a 5 Access is denied. message. We would like to change this message for the user, so when they call our workstudy's who answer the phone do not interpret this as a computer rights management issue and can route the call properly. Is it possible? Is this error number system wide, or just for printing errors? If it's not a system wide error where might the string for this error be?

  Read the article

• Does the upload file INPUT HTML element give any personal information away?

  - by Senseful

  I'm wondering what personal information the file input (<input type="file">) element gives the website. I noticed that it does show the file name and the website does seem to have access to it. What about the file's path? If the file is located in My Documents, they could find out the user name via the path (e.g. C:\Documents and Settings\Bob\My Documents) which many times is the actual user's name that is using the website. What information do most modern browsers allow the website to access when a user uses the file input element? Could JavaScript somehow be used to gain more information? What about when plugins (such as Flash or Java) implement file uploading?

  Read the article

• Finding proof of server being compromised by Black Hole Toolkit exploit

  - by cosmicsafari

  I recently took over maintenance of a company server. (Just Host, C Panel, Linux server), theres a tonne of websites on it which i know nothing about. It had came to my attention that a client had attempted to access one of the websites hosted on this server and was met with a warning from windows defender. It had blocked access because it said the website had been compromised by the Black Hole Toolkit or something to that effect. Anyway I went in and updated various plugins and deleted some old suspect websites. I have since ran the website in question through a few online malware scanners and its comes up clean everytime. However im not convinced. Do any of you guys know extensive ways i can check that the server isn't still compromised. I have no way to install any malware scanners or anti virus programs on the server as it is horribly locked down by Just Host.

  Read the article

• Port forwarding not working?

  - by rphello101

  I'm trying to set up an Apache Server to be accessed publicly. I'm using a Netgear R4500 router hooked up to a Motorola SB6121 modem. I can access my server on my computer by typing in my IP address. After following the instructions to forward port 80 so I can access the server from other computers, it does not work (see image). I get "This webpage is not available". I am forwarding to the IP address of my computer. Using this Network Port Scanner Tool, it says "80/tcp filtered http", which, as I understand it, means forwarding did not work correctly. In my Apache httpd file, I have: ServerName 192.168.1.13:80 and Listen 192.168.1.13:80 Anyone know what's wrong or have something I can try? click to enlarge

  Read the article

• TV network capabilities.

  - by Narcolapser

  Question: Can the major TV producer's internet TV systems access network resource? Info: I'm looking for large TV's right now for my company to set up in conference rooms. We want the ability to load presentations with out having to have a computer to do so. Our hope is to put things on to network drives and access and display them from there. I've heard that LG's can do this if you convert the power point file in to a show format. that's fine. I just need to get this information to the TV with out the computer attached. Can anyone tell me if companies like LG, Vizio, Sony, Samsung, etc. have TV's that are capable of doing this? Thanks ~n

  Read the article

• Signal strength and Speed of wireless network

  - by Tim

  As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

  Read the article

• Sarg report error

  - by amyassin

  I have a proxy server that runs Ubuntu Server 11.10, Squid 2.7.STABLE9. I installed sarg (version 2.3.1 Sep-18-2010) to generate reports using the ordinary apt-get install, and added a cron job to generate a report of the day every 5 minutes (that will overwrite the 5-minutes-older one): */5 * * * * /root/proxy_report.sh And the content of /root/proxy_report.sh is: #!/bin/bash /usr/bin/sarg -nd `date +"%d/%m/%Y"` > /dev/null 2>&1 And I added another cron job to generate a full report every hour at :32 (not to collide with the 5 minutes job): */32 * * * * /root/proxy_report_full.sh And the content of /root/proxy_report_full.sh is : #!/bin/bash /usr/bin/sarg -n > /dev/null 2>&1 And I added a small script to remove the yesterday full report (the full report that ends in yesterday that won't be overwritten by the new today full report) in /etc/rc.local to run at startup: /usr/bin/rm_yesterday.sh &>> /var/log/rm_yesterday Where /usr/bin/rm_yesterday.sh: #!/bin/bash find /var/www/sarg/ | grep `date -d Apr1 +"%Y%b%d"`-* | grep -v `date +"%Y%b%d"` | xargs rm -rf * Apr1 is the starting date of the proxy... ** I've placed it in /usr/bin to be mounted early at startup... That arrangement went OK for about a month and a half, except for one time I noticed some errors and reports wasn't generated, and fixed that by making an offset (the two minutes in 32 of the second cron job). However, it then started not to generate reports anymore. By manually trying to generate it it gives the following error: root@proxy-server:~# sarg -n SARG: getword_atoll loop detected after 3 bytes. SARG: Line="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: Record="154 192.168.10.40 TCP_MISS/200 39 CONNECT www.google.com" SARG: searching for 'x2f' SARG: getword backtrace: SARG: 1:sarg() [0x8050a4a] SARG: 2:sarg() [0x8050c8b] SARG: 3:sarg() [0x804fc2e] SARG: 4:/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x129113] SARG: 5:sarg() [0x80501c9] SARG: Maybe you have a broken date in your /var/log/squid/access.log file When I looked to /var/log/squid/ folder, I noticed that it contains some rotated logs: root@proxy-server:~# ls /var/log/squid/ access.log access.log.1 cache.log cache.log.1 store.log store.log.1 So maybe sarg installed logrotate with it? Or it comes with the standard Ubuntu? I don't remember I installed it manuallly. The question is: What could've gone wrong? Does it have something to do with rotating the log? How can I trace the error and start generating reports again?

  Read the article

• Network connectivity issues with Windows Store

  - by Duy Tran

  I have my Windows 8 Pro build 9200 installed on my Dell laptop. I want to install some new apps and updates from the Store but there might be some network problem that caused the downloading gauge showing up but not really running at all. I followed some instructions that switched from local user to my Microsoft account, but this "Please wait" screen keeps showing and I don't really know why. I still have internet access and can use some apps like People, Mail, etc. with my account logged in, I can surf the net using Firefox, Chrome and Internet Explorer. I did another test using cmd with ping -t google.com and it showed that my laptop has internet access. Anybody knows a solution to make the Store working properly? Or is there any workaround to switch to the Microsoft account instead of a local user account?

  Read the article

• What's the easiest way to allow Exchange 2003 remote (no MSO client) users check their Mailbox size?

  - by Myrddin Emrys

  We are migrating from Exchange 2003 with no quota settings to Exchange 2010 with limited mailbox sizes. We are trying to get users to clean their mailboxes prior to the move to reduce the transfer load, as well as to comply with new quotas on the 2010 system. But many users access their mail through webmail only. I cannot see a way for users to access their mail store size in this manner. Has anyone else run into this problem? Is there a good way to easily let users check their own mailbox size? The only thing I've come up with as a workaround is a report that IT generates and mail-merge it out to users daily with their current mailbox size. This is cumbersome and time consuming compared to a way for them to check their own mailbox size however.

  Read the article

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Securing a persistent reverse SSH connection for management

  - by bVector

  I am deploying demo Ubuntu 10.04 LTS servers in environments I do not control and would like to have an easy and secure way to administer these machines without having to have the destination firewall forward port 22 for SSH access. I've found a few guides to do this with reverse port (e.g. howtoforge reverse ssh tunneling guide) but I'm concerned with security of the stored ssh credentials required for the tunnel to be opened automatically. If the machine is compromised (primary concern is physical access to the machine is out of my control) how can I stop someone from using the stored credentials to poke around in the reverse ssh tunnel target machine? Is it possible to secure this setup, or would you suggest an alternate method?

  Read the article

• How to configure Amazon Security Groups to achieve multi-tier architecture?

  - by ks78

  What is the preferred way to configure Amazon Security Groups to achieve a multi-tier architecture? Each of my instances has its own Security Group, which I only want to use for rules specific to an instance. I'd like to keep any rules which apply to multiple instances in a separate Security Group, which can then be assigned to instance Security Groups as necessary. As an example, I've setup a group called "admin", which allows administrative access from my IP. I added the "admin" group as the source to each of my instance security groups. However, I still can't access the instances from my IP without adding the rules directly to the instance's group. Am I missing something? Although it seems a multi-tier security architecture should be possible, it doesn't seem to be working.

  Read the article

• How do I set the UNC permissions on a SQL Server 2008 Filestream UNC?

  - by Justin Dearing

  I have a SQL Server 2008 instance. I have configured filestream access properly, and use it from one column on one table in one of my databases. However, I cannot access the UNC share for the filestream data. I have tried browsing to it as well as trying to open specific files and I get errors both ways. I am running SQL Server 2008 enterprise on a Windows 7 workstation running on the domain. I've tried running the sql server service as a local user, then as network admin. The user I am logged in as is a local admin and a sysadmin in SQL server.

  Read the article

• vsftpd with pam_winbind.so

  - by David

  I'm trying to setup vsftpd to use logins from our domain. I want the ftp users to be able to login using their active directory username/password and have be able to have full access to /media/storage/ftp/username. I setup pptp using winbind and it is working fine, so I belive the issue is with vsftpd and pam. The ftp server runs and gives 530 for the login. I turned on debug for the pam module, but I see nothing in the syslog. Vsftp only logs a wrong login in its log. /etc/pam.d/vsftpd auth required pam_winbind.so debug /etc/vsftpd.conf listen=YES listen_ipv6=NO connect_from_port_20=YES anonymous_enable=NO local_enable=YES write_enable=YES xferlog_enable=YES idle_session_timeout=600 data_connection_timeout=120 nopriv_user=ftp ftpd_banner=Welcome to Scantiva! Authorized access only! local_umask=022 local_root=/media/storage/ftp/$USER user_sub_token=$USER chroot_local_user=YES secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd guest_enable=YES guest_username=ftp ssl_enable=YES allow_anon_ssl=NO force_local_data_ssl=NO force_local_logins_ssl=NO ssl_tlsv1=YES ssl_sslv2=YES ssl_sslv3=YES rsa_cert_file=/etc/ssl/private/vsftpd.pem

  Read the article

• How to forward connection from one interface to another under linux

  - by Daniel

  Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

  Read the article

• Signal strength and Speed of wireless network

  - by Tim

  As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

  Read the article

• Compressed disk image on Linux

  - by Aaron Digulla

  I just got my new computer with a much bigger harddisk. I think I copied all important files over but just to be sure, I'd like to keep a disk image of my old disk. To save space, I'd like to compress it but I didn't find an option to mount a compressed image. My goals: Result must be easy to access No need to decompress the whole thing before I can access anything Files should be quick to locate - no TAR/CPIO archive Necessary space should be less than just copying the files over So ideally, I'm looking for a read-only, compressed file system which I can create in a file and which grows automatically.

  Read the article

• How to get Apache web server to run on other computers?

  - by Eric

  I have been using Apache Web Server for a while now and one thing I have noticed is that outside of my computer I can not access it. I use my Apache server for PHP development on my computer, but I would like to access stuff I have made outside of my computer. I am on a linksys router network. I usually run it of http://localhost/ or http://127.0.0.1/. I IPCONFIGED my computer and got 192.168.1.105 so I went there with my browser and got the page just fine. I tried doing this on another computer on the same network but it didn't work. How do I fix this? Sorry about the bad wording. I am in ah hurry Information you might need to know: Server: Apache 2.2 Operating System: Windows 7 ULTIMATE

  Read the article

• Primary/secondary ethernet interfaces via NetworkManager in Ubuntu 9.10

  - by Josh

  I have an Ubuntu 9.10 machine with three ethernet interfaces, eth0, eth1 and eth2. eth2 is connected to a private network. eth0 and eth2 are connected to two different LANs. Either one will provide access to the internet. All three networks have DHCP servers. Using Ubuntu's the default settings (And Gnome), when I boot up all the interfaces are active and my system gets three IP addresses. However any attempt to access the internet results in connection timeouts and other weirdness. I suspect that traffic is going out on one NIC (like eth0) and coming back in on another (like eth1). I'm not sure what's going on. The only way I can access the internet at the moment is to bring two of the devices down with ifdown. How can I configure eth0 as my primary interface so all trafic goes out by default on that interface, while keeping the other two active? Also, I want to make sure Avahi broadcasts properly on all three IPs so that the computers on the LAN of eth1 can still connect to myHostname.local... EDIT: Here's my routing table: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 172.16.151.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 172.16.30.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.1.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 172.16.30.2 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.1.0.1 0.0.0.0 UG 0 0 0 eth1 I want the 172.16.30.2 network to be the primary one and the 10.1.0.0 network to be the secondary one. EDIT2: My nameservers are also incorrect. It seems like Ubuntu is bringing the networks up in order, eth0, then 1, then 2, and the DHCP information from eth1 is overriding eth0, and eth2 is overriding eth1. How can I reverse this so the DHCP information from eth0 is the "master"? EDIT3: This seems to be an issue with Gnome's NetworkManager.

  Read the article

• How to connect with MySQL server if it won't connect via the socket?

  - by cwd

  I have an account on a shared server. I have jailshell access and also PhpMyAdmin. I want to run mysql commands via SSH but I'm getting an error: $ mysql -u mySqlUser -p mySqlPw Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' I can connect with PHP and phpMyAdmin, so would it be possible to call mysql from the shell and have it connect via an ip and port instead of the socket? The file /var/lib/mysql/mysql.sock does not exist - maybe that is intentional, and the only thing in /etc/my.cnf is [mysqld] skip-innodb More Info I don't have access to change system settings. I did a search in /var for mysql.sock but found nothing. However, phpMyAdmin might be connecting via a socket somehow: Really it would just be great if I could connect via IP. Also tried these two syntaxes: $ mysql -u mySqlUser -p mySqlPw -h localhost $ mysql -u mySqlUser -p mySqlPw -h localhost -P 3306 Both with the same result: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)

  Read the article

• Very slow accessing printer shared from Windows Machine

  - by Tarski

  Hello, How do I go about debugging a networking problem where the office printer is shared off a Windows XP PC and is very slow from me to access? Print/changing any settings can take several minutes and applications often display "Not Responding" in this time. My machine is a Windows Vista PC. The other PCs in the office are either Vista or XP and do not suffer from any printing problems. I am not experiencing any other network related problems, I can access the web and e-mail fine. The printer is a HP officejet Pro 8000

  Read the article

• Samba PDC plus universal folder

  - by skids89

  I know how to configure samba on my ubuntu box to become a PDC however I need some select files to be accessible to multiple users. These files are beyond their personal files. I.E. users A-C need to be able to access a schedule saved as a spreadsheet. But user D does not and users B-D need to be able to access confidential employee info but user A does not. How do I set this up on top of the PDC structure? Any video tutorials would be a plus. Im new to linux so documentation is a confusing slow slog to learn. Thanks so much in advance!

  Read the article

• Slow website load with CNAME, fast when using IP

  - by Nate Strandberg

  I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

  Read the article

• Is it safe to export a NFS-mounted directory via NFS?

  - by netvope

  Motivation: To access files on a NFS server from multiple computers without making more than one connection to the NFS server.

  Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >