Search Results

Search found 13011 results on 521 pages for 'catch block'.

Page 393/521 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

  • Exiting from the Middle of an Expression Without Using Exceptions

    - by Jon Purdy
    Is there a way to emulate the use of flow-control constructs in the middle of an expression? Is it possible, in a comma-delimited expression x, y, for y to cause a return? Edit: I'm working on a compiler for something rather similar to a functional language, and the target language is C++. Everything is an expression in the source language, and the sanest, simplest translation to the destination language leaves as many things expressions as possible. Basically, semicolons in the target language become C++ commas. In-language flow-control constructs have presented no problems thus far; it's only return. I just need a way to prematurely exit a comma-delimited expression, and I'd prefer not to use exceptions unless someone can show me that they don't have excessive overhead in this situation. The problem of course is that most flow-control constructs are not legal expressions in C++. The only solution I've found so far is something like this: try { return x(), // x(); (1 ? throw Return(0) : 0); // return 0; } catch (Return& ret) { return ref.value; } The return statement is always there (in the event that a Return construct is not reached), and as such the throw has to be wrapped in ?: to get the compiler to shut up about its void result being used in an expression. I would really like to avoid using exceptions for flow control, unless in this case it can be shown that no particular overhead is incurred; does throwing an exception cause unwinding or anything here? This code needs to run with reasonable efficiency. I just need a function-level equivalent of exit().

    Read the article

  • show() progressdialog in asynctask inside fragment

    - by just_user
    I'm trying to display a progressDialog while getting an image from a url to a imageview. When trying to show the progressDialog the parent activity has leaked window... Strange thing is that I have two fragments in the this activity, in the first fragment this exact same way of calling the progressdialog works but when the fragment is replaced and i try to make it again it crashes. This is the asynctask I'm using inside the second fragment with the crash: class SkinPreviewImage extends AsyncTask<Void, Void, Void> { private ProgressDialog progressDialog; @Override protected void onPreExecute() { progressDialog = new ProgressDialog(getActivity()); progressDialog.setMessage("Loading preview..."); if(progressDialog != null) progressDialog.show(); progressDialog.setOnCancelListener(new OnCancelListener() { public void onCancel(DialogInterface arg0) { SkinPreviewImage.this.cancel(true); } }); } @Override protected Void doInBackground(Void... params) { try { URL newurl = new URL(url); Bitmap mIcon_val = BitmapFactory.decodeStream(newurl.openConnection().getInputStream()); skinPreview.setImageBitmap(mIcon_val); } catch (IOException e) { Log.e("SkinStoreDetail", e.getMessage()); } return null; } @Override protected void onPostExecute(Void v) { if(progressDialog != null) progressDialog.dismiss(); } } I've seen a few similar questions but the one closest to solve my problem used a groupactivity for the parent which I'm not using. Any suggestions?

    Read the article

  • Is it necessary to "escape" character "<" and ">" for javascript string?

    - by Morgan Cheng
    Sometimes, server side will generate strings to be embedded in inline JavaScript code. For example, if "UserName" should be generated by ASP.NET. Then it looks like. <script> var username = "<%UserName%>"; </script> This is not safe, because a user can have his/her name to be </script><script>alert('bug')</script></script> It is XSS vulnerability. So, basically, the code should be: <script> var username = "<% JavascriptEncode(UserName)%>"; </script> What JavascriptEncode does is to add charater "\" before "/" and "'" and """. So, the output html is like. var username = "<\/scriptalert(\'bug\')<\/script<\/script"; Browser will not interpret "<\/script" as end of script block. So, XSS in avoided. However, there are still "<" and "" there. It is suggested to escape these two characters as well. First of all, I don't believe it is a good idea to change "<" to "&lt;" and "" to "&gt;" here. And, I'm not sure changing "<" to "\<" and "" to "\" is recognizable to all browsers. It seems it is not necessary to do further encoding for "<" and "". Is there any suggestion on this? Thanks.

    Read the article

  • Turning a JSON list into a POJO

    - by Josh L
    I'm having trouble getting this bit of JSON into a POJO. I'm using Jackson configured like this: protected ThreadLocal<ObjectMapper> jparser = new ThreadLocal<ObjectMapper>(); public void receive(Object object) { try { if (object instanceof String && ((String)object).length() != 0) { ObjectDefinition t = null ; if (parserChoice==0) { if (jparser.get()==null) { jparser.set(new ObjectMapper()); } t = jparser.get().readValue((String)object, ObjectDefinition.class); } Object key = t.getKey(); if (key == null) return; transaction.put(key,t); } } catch (Exception e) { e.printStackTrace(); } } Here's the JSON that needs to be turned into a POJO: { "id":"exampleID1", "entities":{ "tags":[ { "text":"textexample1", "indices":[ 2, 14 ] }, { "text":"textexample2", "indices":[ 31, 36 ] }, { "text":"textexample3", "indices":[ 37, 43 ] } ] } And lastly, here's what I currently have for the java class: protected Entities entities; @JsonIgnoreProperties(ignoreUnknown = true) protected class Entities { public Entities() {} protected Tags tags; @JsonIgnoreProperties(ignoreUnknown = true) protected class Tags { public Tags() {} protected String text; public String getText() { return text; } public void setText(String text) { this.text = text; } }; public Tags getTags() { return tags; } public void setTags(Tags tags) { this.tags = tags; } }; //Getters & Setters ... I've been able to translate the more simple objects into a POJO, but the list has me stumped. Any help is appreciated. Thanks!

    Read the article

  • Understanding Java Wait and Notify methods

    - by Maddy
    Hello all: I have a following program: import java.util.concurrent.ExecutorService; import java.util.concurrent.Executors; public class SimpleWaitNotify implements Runnable { final static Object obj = new Object(); static boolean value = true; public synchronized void flag() { System.out.println("Before Wait"); try { obj.wait(); } catch (InterruptedException e) { System.out.println("Thread interrupted"); } System.out.println("After Being Notified"); } public synchronized void unflag() { System.out.println("Before Notify All"); obj.notifyAll(); System.out.println("After Notify All Method Call"); } public void run() { if (value) { flag(); } else { unflag(); } } public static void main(String[] args) throws InterruptedException { ExecutorService pool = Executors.newFixedThreadPool(4); SimpleWaitNotify sWait = new SimpleWaitNotify(); pool.execute(sWait); SimpleWaitNotify.value = false; SimpleWaitNotify sNotify = new SimpleWaitNotify(); pool.execute(sNotify); pool.shutdown(); } } When I wait on obj, I get the following exception Exception in thread "pool-1-thread-1" java.lang.IllegalMonitorStateException: current thread not owner for each of the two threads. But if I use SimpleWaitNotify's monitor then the program execution is suspended. In other words, I think it suspends current execution thread and in turn the executor. Any help towards understanding what's going on would be duly appreciated. This is an area1 where the theory and javadoc seem straightforward, and since there aren't many examples, conceptually left a big gap in me.

    Read the article

  • How to make a thread that runs at x:00 x:15 x:30 and x:45 do something different at 2:00.

    - by rmarimon
    I have a timer thread that needs to run at a particular moments of the day to do an incremental replication with a database. Right now it runs at the hour, 15 minutes past the hour, 30 minutes past the hour and 45 minutes past the hour. This is the code I have which is working ok: public class TimerRunner implements Runnable { private static final Semaphore lock = new Semaphore(1); private static final ScheduledExecutorService executor = Executors.newSingleThreadScheduledExecutor(); public static void initialize() { long delay = getDelay(); executor.schedule(new TimerRunner(), delay, TimeUnit.SECONDS); } public static void destroy() { executor.shutdownNow(); } private static long getDelay() { Calendar now = Calendar.getInstance(); long p = 15 * 60; // run at 00, 15, 30 and 45 minutes past the hour long second = now.get(Calendar.MINUTE) * 60 + now.get(Calendar.SECOND); return p - (second % p); } public static void replicate() { if (lock.tryAcquire()) { try { Thread t = new Thread(new Runnable() { public void run() { try { // here is where the magic happens } finally { lock.release(); } } }); t.start(); } catch (Exception e) { lock.release(); } } else { throw new IllegalStateException("already running a replicator"); } } public void run() { try { TimerRunner.replicate(); } finally { long delay = getDelay(); executor.schedule(new TimerRunner(), delay, TimeUnit.SECONDS); } } } This process is started by calling TimerRunner.initialize() when a server starts and calling TimerRunner.destroy(). I have created a full replication process (as opposed to incremental) that I would like to run at a certain moment of the day, say 2:00am. How would change the above code to do this? I think that it should be very simple something like if it is now around 2:00am and it's been a long time since I did the full replication then do it now, but I can't get the if right. Beware that sometimes the replicate process takes way longer to complete. Sometimes beyond the 15 minutes, posing a problem in running at around 2:00am.

    Read the article

  • Facebook Application with PHP running loosing session

    - by ArneRie
    Iam trying to build an Facebook Application based on PHP. The Application is running under php on my own Webhost inside an Canvas as iFrame. I have included the newest Client Library for PHP from Facebook: facebook-php-sdk-94fcb13 To Authorize the user inside my application iam trying to use Facebook Connect, like the example shipped with the Client. Everything works fine the 1st Login, but when i hit the F5 Key to reload the page, the session is lost and i have to login again. When i call my application outside of the Facebook Canvas everything is fine. Iam not sure, but i think my Browser (Chrome/FireFox - Ubuntu) is not allowing to store an cookie inside an iFrame. Does someone knows an solution for this Problem? Here are some Parts of the Sourcecode: $facebook = new Facebook(array( 'appId' => 'x', 'secret' => 'x', 'cookie' => 'true', )); $session = $facebook->getSession(); $facebook->setSession($session); $me = null; // Session based API call. if ($session) { try { $uid = $facebook->getUser(); $me = $facebook->api('/me'); } catch (FacebookApiException $e) { error_log($e); } } // login or logout url will be needed depending on current user state. if ($me) { $logoutUrl = $facebook->getLogoutUrl(); } else { $loginUrl = $facebook->getLoginUrl(); }

    Read the article

  • .Net Entity objectcontext thread error

    - by Chris Klepeis
    I have an n-layered asp.net application which returns an object from my DAL to the BAL like so: public IEnumerable<SourceKey> Get(SourceKey sk) { var query = from SourceKey in _dataContext.SourceKeys select SourceKey; if (sk.sourceKey1 != null) { query = from SourceKey in query where SourceKey.sourceKey1 == sk.sourceKey1 select SourceKey; } return query.AsEnumerable(); } This result passes through my business layer and hits the UI layer to display to the end users. I do not lazy load to prevent query execution in other layers of my application. I created another function in my DAL to delete objects: public void Delete(SourceKey sk) { try { _dataContext.DeleteObject(sk); _dataContext.SaveChanges(); } catch (Exception ex) { Debug.WriteLine(ex.Message + " " + ex.StackTrace + " " + ex.InnerException); } } When I try to call "Delete" after calling the "Get" function, I receive this error: New transaction is not allowed because there are other threads running in the session This is an ASP.Net app. My DAL contains an entity data model. The class in which I have the above functions share the same _dataContext, which is instantiated in my constructor. My guess is that the reader is still open from the "Get" function and was not closed. How can I close it?

    Read the article

  • Listen to double click not click

    - by Mohsen
    I'm just wondering why click event happening when I dbclick an element? I have this code:(JSBIN) HTML <p id="hello">Hello World</p> JavaScript document.getElementById('hello').addEventListener('click', function(e){ e.preventDefault(); this.style.background = 'red'; }, false); document.getElementById('hello').addEventListener('dbclick', function(){ this.style.background = 'yellow'; }, false); It should do different things for click and double click, but it seems when you double click on the p it catch click event in advance and ignore double click. I tried preventDefault the click event too. How can I listen to just dbclick? UPDATE I had a typo in my code. dbclick is wrong. It's dblclick. Anyway the problem still exist. When user double clicks the click event happens. This is updated code that prove it:(JSBin) document.getElementById('hello').addEventListener('click', function(e){ e.preventDefault(); this.style.background = 'red'; this.innerText = "Hello World clicked"; }, false); document.getElementById('hello').addEventListener('dblclick', function(){ this.style.background = 'green'; }, false);

    Read the article

  • Thread to receive the messages from serial port is not working using c#

    - by karthik
    I am using Serial port to receive the messages. The below function is running in a thread. When i debug i find that the thread is running properly. But "if (sp.IsOpen)" is always false, due to which the code is not executing inside the IF condition at all. It says the Port is closed. I will be having multiple serial ports in my system and i will not know, which port will receive the message. So i need to listen to all the ports in one Thread. How can i solve my problem here ? private void ListenerPorts() { log.Info("Listening Thread Started"); while (true) { //foreach (SerialPort sp in storeport) foreach (SerialPort sp in comPortsList) { if (sp.IsOpen) { sp.ReadTimeout = readTimeoutInMs; sp.WriteTimeout = writeTimeoutInMs; try { string msg = sp.ReadLine(); this.GetMessageRichTextBox("Message : " + msg + "\n"); sp.WriteLine(sp.PortName); if (msg.Contains("COM")) { // is AutoScan receiverPortName = sp.ReadLine(); this.updateLblStatusRichTextBox(sp.PortName + " is connected to " + msg + "\n"); } else { //standalone is uppercase ReceiverPortName = sp.ReadLine(); this.updateLblStatusRichTextBox(sp.PortName + " is connected to " + ReceiverPortName + "\n"); } } catch (Exception ex) { // no data System.Diagnostics.Debug.WriteLine(sp.PortName + " : " + ex.Message); } } } } }

    Read the article

  • Winsock tcp/ip Socket listening but connection refused, race condition?

    - by Wayne
    Hello folks. This involves two automated unit tests which each start up a tcp/ip server that creates a non-blocking socket then bind()s and listen()s in a loop on select() for a client that connects and downloads some data. The catch is that they work perfectly when run separately but when run as a test suite, the second test client will fail to connect with WSACONNREFUSED... UNLESS there is a Thread.Sleep() of several seconds between them??!!! Interestingly, there is retry loop every 1 second for connecting after any failure. So the second test loops for a while until timeout after 10 minutes. During that time, netstat -na shows the correct port number is in the LISTEN state for the server socket. So if it is in the listen state? Why won't it accept the connection? In the code, there are log messages that show the select NEVER even gets a socket ready to read (which means ready to accept a connection when it applies to a listening socket). Obviously the problem must be related to some race condition between finishing one test which means close() and shutdown() on each end of the socket, and the start up of the next. This wouldn't be so bad if the retry logic allowed it to connect eventually after a couple of seconds. However it seems to get "gummed up" and won't even retry. However, for some strange reason the listening socket SAYS it's in the LISTEN state even through keeps refusing connections. So that means it's the Windoze O/S which is actually catching the SYN packet and returning a RST packet (which means "Connection Refused"). The only other time I ever saw this error was when the code had a problem that caused hundreds of sockets to get stuck in TIME_WAIT state. But that's not the case here. netstat shows only about a dozen sockets with only 1 or 2 in TIME_WAIT at any given moment. Please help.

    Read the article

  • XMLHttpRequest open() returning access denied

    - by rjovic
    Hi! I have problem with xhr open() method. My code follows : var xmlhttp=false; if(!xmlhttp) try { xmlhttp=new XMLHttpRequest(); } catch(e) { xmlhttp=false; } function returnPage(url) { if(!xmlhttp) return alert("Your browser doesn't seem to support XMLHttpRequests."); xmlhttp.open("GET",url,true); xmlhttp.onreadystatechange=function() { if(xmlhttp.readyState!=4) return; if(!xmlhttp.status||xmlhttp.status==200) alert(xmlhttp.responseText); else alert("Request failed!"); }; //onreadystatechange xmlhttp.send(null); } Call : <a href='#' onclick="returnPage('http://www.something.com'); return false;">Link 1</a></p> I'm using IE8 (because I'm building web slice) and I received error "Access denied". I found on the Internet that problem is that XHR isn't working across different domains, but I used code from Firefox Add-on which is working OK. And that add-on and "my" code (which are the same) are calling the same page. How that add-on have access and my code not?

    Read the article

  • django hidden field error

    - by dana
    hi, there, i'm building a message system for a virtual community, but i can't take the userprofile id i have in views.py def save_message(request): if request.method == 'POST': form = MessageForm(request.POST) if form.is_valid(): new_obj = form.save(commit=False) new_obj.sender = request.user u = UserProfile.objects.get(request.POST['userprofile_id']) new_obj.owner = u new_obj.save() return HttpResponseRedirect('.') else: form = MessageForm() return render_to_response('messages/messages.html', { 'form': form, }, context_instance=RequestContext(request)) and the template: {% block primary %} <form action="." method="post"> {{ form.as_p }} <p><input type="hidden" value="{{ userprofile.id }}" name = "owner" /></p> <p><input type="submit" value="Send Message!" /></p> </form> {% endblock %} forms.py: class MessageForm(ModelForm): class Meta: model = Messages fields = ['message'] models.py: class Messages(models.Model): message = models.CharField(max_length = 300) read = models.BooleanField(default=False) owner = models.ForeignKey(UserProfile) sender = models.ForeignKey(User) I don't figure out why i get this error,since i'm just trying to get the profileId of a user, using a hiddeen field. the error is: Key 'UserProfile_id' not found in <QueryDict: {u'owner': [u''], u'message': [u'fdghjkl']}> and i'm getting it after i fill out the message text field. Thanks!

    Read the article

  • Displaying emails in a JTable (Java Swing)

    - by Paul
    Hi I'm new to all this. I have been trying to display fetched emails in a JTable using the JavaMail add-on. However when I ask the program to set the value it never does. I have been working in NetBeans if that is any help? the fetchMail class finds all may on a server. The gui class is used to display all emails in a table as well as creating mail. You will probably think that I have tried it like a bull in a china shop, I am new to Java and trying to give myself a challenge. Any help/advice would be greatly appreciated fetchMail: package mail; import java.util.; import java.io.; import java.text.DateFormat; import java.text.SimpleDateFormat; import javax.mail.; import javax.mail.internet.; import javax.mail.search.; import javax.activation.; public class fetchMail { public void fetch(String username, String pass, String search){ MessagesTableModel tableModel = new MessagesTableModel(); String complete; DateFormat df = new SimpleDateFormat("dd/MM/yyyy"); gui gui = new gui(); // SUBSTITUTE YOUR ISP's POP3 SERVER HERE!!! String host = "imap.gmail.com"; // SUBSTITUTE YOUR USERNAME AND PASSWORD TO ACCESS E-MAIL HERE!!! String user = username; String password = pass; // SUBSTITUTE YOUR SUBJECT SUBSTRING TO SEARCH HERE!!! String subjectSubstringToSearch = search; // Get a session. Use a blank Properties object. Session session = Session.getInstance(new Properties()); Properties props = System.getProperties(); props.setProperty("mail.store.protocol", "imaps"); props.setProperty("mail.imap.socketFactory.class", "javax.net.ssl.SSLSocketFactory"); props.setProperty("mail.imap.socketFactory.fallback", "false"); try { // Get a Store object Store store = session.getStore("imaps"); store.connect(host, user, password); // Get "INBOX" Folder fldr = store.getFolder("INBOX"); fldr.open(Folder.READ_WRITE); int count = fldr.getMessageCount(); System.out.println(count + " total messages"); // Message numebers start at 1 for(int i = 1; i <= count; i++) { // Get a message by its sequence number Message m = fldr.getMessage(i); // Get some headers Date date = m.getSentDate(); int pos = i - 1; String d = df.format(date); Address [] from = m.getFrom(); String subj = m.getSubject(); String mimeType = m.getContentType(); complete = date + "\t" + from[0] + "\t" + subj + "\t" + mimeType; //tableModel.setMessages(m); gui.setDate(d, pos); // System.out.println(d + " " + i); } // Search for e-mails by some subject substring String pattern = subjectSubstringToSearch; SubjectTerm st = new SubjectTerm(pattern); // Get some message references Message [] found = fldr.search(st); System.out.println(found.length + " messages matched Subject pattern \"" + pattern + "\""); for (int i = 0; i < found.length; i++) { Message m = found[i]; // Get some headers Date date = m.getSentDate(); Address [] from = m.getFrom(); String subj = m.getSubject(); String mimeType = m.getContentType(); //System.out.println(date + "\t" + from[0] + "\t" + // subj + "\t" + mimeType); Object o = m.getContent(); if (o instanceof String) { // System.out.println("**This is a String Message**"); // System.out.println((String)o); } else if (o instanceof Multipart) { // System.out.print("**This is a Multipart Message. "); Multipart mp = (Multipart)o; int count3 = mp.getCount(); // System.out.println("It has " + count3 + // " BodyParts in it**"); for (int j = 0; j < count3; j++) { // Part are numbered starting at 0 BodyPart b = mp.getBodyPart(j); String mimeType2 = b.getContentType(); // System.out.println( "BodyPart " + (j + 1) + // " is of MimeType " + mimeType); Object o2 = b.getContent(); if (o2 instanceof String) { // System.out.println("**This is a String BodyPart**"); // System.out.println((String)o2); } else if (o2 instanceof Multipart) { // System.out.print( // "**This BodyPart is a nested Multipart. "); Multipart mp2 = (Multipart)o2; int count2 = mp2.getCount(); // System.out.println("It has " + count2 + // "further BodyParts in it**"); } else if (o2 instanceof InputStream) { // System.out.println( // "**This is an InputStream BodyPart**"); } } //End of for } else if (o instanceof InputStream) { // System.out.println("**This is an InputStream message**"); InputStream is = (InputStream)o; // Assumes character content (not binary images) int c; while ((c = is.read()) != -1) { // System.out.write(c); } } // Uncomment to set "delete" flag on the message //m.setFlag(Flags.Flag.DELETED,true); } //End of for // "true" actually deletes flagged messages from folder fldr.close(true); store.close(); } catch (MessagingException mex) { // Prints all nested (chained) exceptions as well mex.printStackTrace(); } catch (IOException ioex) { ioex.printStackTrace(); } } } gui: /* * gui.java * * Created on 13-May-2010, 18:29:30 */ package mail; import java.text.DateFormat; import java.text.FieldPosition; import java.text.ParsePosition; import java.text.SimpleDateFormat; import java.util.Date; import java.util.Vector; import javax.mail.Address; import javax.swing.JScrollPane; import javax.swing.JTable; import javax.swing.ListSelectionModel; import javax.swing.event.ListSelectionEvent; import javax.swing.event.ListSelectionListener; import javax.swing.event.TableModelListener; import javax.swing.table.DefaultTableModel; import javax.swing.table.TableModel; public class gui extends javax.swing.JFrame { private MessagesTableModel tableModel; // Table listing messages. private JTable table; String date; /** Creates new form gui */ public gui() { initComponents(); } @SuppressWarnings("unchecked") private void initComponents() { recieve = new javax.swing.JButton(); jButton1 = new javax.swing.JButton(); jScrollPane1 = new javax.swing.JScrollPane(); inboxTable = new javax.swing.JTable(); setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE); recieve.setText("Receve"); recieve.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { recieveActionPerformed(evt); } }); jButton1.setText("new"); jButton1.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { jButton1ActionPerformed(evt); } }); inboxTable.setModel(new javax.swing.table.DefaultTableModel( new Object [][] { {null, null, null}, {null, null, null}, {null, null, null}, {null, null, null} }, new String [] { "Date", "subject", "sender" } ) { Class[] types = new Class [] { java.lang.String.class, java.lang.String.class, java.lang.String.class }; public Class getColumnClass(int columnIndex) { return types [columnIndex]; } }); jScrollPane1.setViewportView(inboxTable); inboxTable.getColumnModel().getColumn(0).setResizable(false); inboxTable.getColumnModel().getColumn(1).setResizable(false); inboxTable.getColumnModel().getColumn(2).setResizable(false); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane()); getContentPane().setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(39, 39, 39) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 558, javax.swing.GroupLayout.PREFERRED_SIZE) .addGroup(layout.createSequentialGroup() .addComponent(recieve) .addGap(18, 18, 18) .addComponent(jButton1, javax.swing.GroupLayout.PREFERRED_SIZE, 75, javax.swing.GroupLayout.PREFERRED_SIZE))) .addGap(73, 73, 73)) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(31, 31, 31) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(recieve) .addComponent(jButton1)) .addGap(18, 18, 18) .addComponent(jScrollPane1, javax.swing.GroupLayout.PREFERRED_SIZE, 258, javax.swing.GroupLayout.PREFERRED_SIZE) .addContainerGap(179, Short.MAX_VALUE)) ); pack(); }// </editor-fold> private void recieveActionPerformed(java.awt.event.ActionEvent evt) { fetchMail fetch = new fetchMail(); fetch.fetch(email goes here, password goes here, search goes here); } private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) { createMail create = new createMail(); centerW center = new centerW(); //create.attVis(); center.center(create); create.setVisible(true); } public void setDate(String Date, int pos){ //pos = pos + 1; String [] s = new String [5]; s[pos] = Date; inboxTable.setValueAt(Date, pos, 0); } public String getDate(){ return date; } /** * @param args the command line arguments */ public static void main(String args[]) { java.awt.EventQueue.invokeLater(new Runnable() { public void run() { new gui().setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JTable inboxTable; private javax.swing.JButton jButton1; private javax.swing.JScrollPane jScrollPane1; private javax.swing.JButton recieve; // End of variables declaration }

    Read the article

  • C# webservice async callback not getting called on HTTP 407 error.

    - by Ben
    Hi, I am trying to test the use-case of a customer having a proxy with login credentials, trying to use our webservice from our client. If the request is synchronous, my job is easy. Catch the WebException, check for the 407 code, and prompt the user for the login credentials. However, for async requests, I seem to be running into a problem: the callback is never getting called! I ran a wireshark trace and did indeed see that the HTTP 407 error was being passed back, so I am bewildered as to what to do. Here is the code that sets up the callback and starts the request: TravelService.TravelServiceImplService svc = new TravelService.TravelServiceImplService(); svc.Url = svcUrl; svc.CreateEventCompleted += CbkCreateEventCompleted; svc.CreateEventAsync(crReq, req); And the code that was generated when I consumed the WSDL: public void CreateEventAsync(TravelServiceCreateEventRequest CreateEventRequest, object userState) { if ((this.CreateEventOperationCompleted == null)) { this.CreateEventOperationCompleted = new System.Threading.SendOrPostCallback(this.OnCreateEventOperationCompleted); } this.InvokeAsync("CreateEvent", new object[] { CreateEventRequest}, this.CreateEventOperationCompleted, userState); } private void OnCreateEventOperationCompleted(object arg) { if ((this.CreateEventCompleted != null)) { System.Web.Services.Protocols.InvokeCompletedEventArgs invokeArgs = ((System.Web.Services.Protocols.InvokeCompletedEventArgs)(arg)); this.CreateEventCompleted(this, new CreateEventCompletedEventArgs(invokeArgs.Results, invokeArgs.Error, invokeArgs.Cancelled, invokeArgs.UserState)); } } Debugging the WS code, I found that even the SoapHttpClientProtocol.InvokeAsync method was not calling its callback as well. Am I missing some sort of configuration?

    Read the article

  • how can exec change the behavior of exec'ed program

    - by R Samuel Klatchko
    I am trying to track down a very odd crash. What is so odd about it is a workaround that someone discovered and which I cannot explain. The workaround is this small program which I'll refer to as 'runner': #include <stdio.h> #include <unistd.h> #include <string.h> #include <errno.h> int main(int argc, char *argv[]) { if (argc == 1) { fprintf(stderr, "Usage: %s prog [args ...]\n", argv[0]); return 1; } execvp(argv[1], argv + 1); fprintf(stderr, "execv failed: %s\n", strerror(errno)); // If exec returns because the program is not found or we // don't have the appropriate permission return 255; } As you can see, all this program does is use execvp to replace itself with a different program. The program crashes when it is directly invoked from the command line: /path/to/prog args # this crashes but works fine when it is indirectly invoked via my runner shim: /path/to/runner /path/to/prog args # works successfully For the life of me, I can figure out how having an extra exec can change the behavior of the program being run (as you can see the program does not change the environment). Some background on the crash. The crash itself is happening in the C++ runtime. Specifically, when the program does a throw, the crashing version incorrectly thinks there is no matching catch (although there is) and calls terminate. When I invoke the program via runner, the exception is properly caught. My question is any idea why the extra exec changes the behavior of the exec'ed program?

    Read the article

  • Destructors not called when native (C++) exception propagates to CLR component

    - by Phil Nash
    We have a large body of native C++ code, compliled into DLLs. Then we have a couple of dlls containing C++/CLI proxy code to wrap the C++ interfaces. On top of that we have C# code calling into the C++/CLI wrappers. Standard stuff, so far. But we have a lot of cases where native C++ exceptions are allowed to propagate to the .Net world and we rely on .Net's ability to wrap these as System.Exception objects and for the most part this works fine. However we have been finding that destructors of objects in scope at the point of the throw are not being invoked when the exception propagates! After some research we found that this is a fairly well known issue. However the solutions/ workarounds seem less consistent. We did find that if the native code is compiled with /EHa instead of /EHsc the issue disappears (at least in our test case it did). However we would much prefer to use /EHsc as we translate SEH exceptions to C++ exceptions ourselves and we would rather allow the compiler more scope for optimisation. Are there any other workarounds for this issue - other than wrapping every call across the native-managed boundary in a (native) try-catch-throw (in addition to the C++/CLI layer)?

    Read the article

  • Closing Connections on asynchronous messaging in JMS

    - by The Elite Gentleman
    Hi Everyone! I have created a JMS wrapper (similar to Springs JmsTemplate since I'm not using Springs) and I was wondering: If I setup asynchronous messaging, when is a good time to close connections and JMS relates resources (so that the Connection Factory in the Resource Pool can be available)? Thanks Here's the source code for receiving JMS messages public Message receive() throws JMSException { QueueConnection connection = null; QueueSession session = null; QueueReceiver consumer = null; try { // TODO Auto-generated method stub connection = factory.createQueueConnection(); if (connection != null && getExceptionListener() != null) { connection.setExceptionListener(getExceptionListener()); } session = connection.createQueueSession(isSessionTransacted(), getAcknowledgeMode()); consumer = session.createReceiver(queue); if (getMessageListener() != null) { consumer.setMessageListener(getMessageListener()); } //Begin connection.start(); if (getMessageListener() == null) { return null; } return receive(session, consumer); } catch (JMSException e) { // TODO: handle exception logger.error(e.getLocalizedMessage(), e); throw e; } finally { JMSUtil.closeMessageConsumer(consumer); JMSUtil.closeSession(session, false); //false = don't commit. JMSUtil.closeConnection(connection, true); //true = stop before close. } As you can see, if getMessageListener() != null then apply it to the MessageConsumer. Am I doing this correctly? The same approach has also been taken for JMS Topic.

    Read the article

  • c#: how do i search for a string with quotes

    - by every_answer_gets_a_point
    i am searching for this string: <!--m--><li class="g w0"><h3 class=r> within the html source of this link: "http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=Santarus Inc?" this is how i am searching for it: d=html.IndexOf(@"<!--m--><li class=""g w0""><h3 class=r><a href=""",1); for some reason it is finding an occurence of it that is incorrect. (it says that it is at position 45 (another words d=45) but this incorrect here are the first couple hundred characters of the string html: <!doctype html><head><title>Santarus Inc&#8206; - Google Search</title><script>window.google={kEI:\"b6jES5nPD4rysQOokrGDDQ\",kEXPI:\"23729,24229,24249,24260,24414,24457\",kCSI:{e:\"23729,24229,24249,24260,24414,24457\",ei:\"b6jES5nPD4rysQOokrGDDQ\",expi:\"23729,24229,24249,24260,24414,24457\"},ml:function(){},kHL:\"en\",time:function(){return(new Date).getTime()},log:function(b,d,c){var a=new Image,e=google,g=e.lc,f=e.li;a.onerror=(a.onload=(a.onabort=function(){delete g[f]}));g[f]=a;c=c||\"/gen_204?atyp=i&ct=\"+b+\"&cad=\"+d+\"&zx=\"+google.time();a.src=c;e.li=f+1},lc:[],li:0,Toolbelt:{}};\nwindow.google.sn=\"web\";window.google.timers={load:{t:{start:(new Date).getTime()}}};try{}catch(u){}window.google.jsrt_kill=1;\n</script><style>body{background:#fff;color:#000;margin:3px 8px}#gbar,#guser{font-size:13px;padding-top:1px !important}#gbar{float:left;height:22px}#guser{padding-bottom:7px !important;text-align:right}.gbh,.gbd{border-top:1px solid #c9d7f1;font-size:1px}.gbh

    Read the article

  • a:hover background-postition problem

    - by Ryan
    For some reason, I am not entirely sure why, but the following is not working. The background position simply stays the same on hover. I cannot figure out why. I could do it another way, but I would like to try and get to the bottom of why it does not work. #nav a:link, #nav a:visited { background:url(../img/nav-sprite.png) no-repeat; display:block; float:left; height:200px; padding:10px; text-indent:-9999px; border:solid 1px red; } #nav a#home { background-position:-10px 0px; width:30px; } #nav a#about-us { background-position:-85px 0px; width:45px; } #nav a:hover { background-position:1px -15px; } Does anybody know what could be causing this? Thanks in advance! Ryan

    Read the article

  • CSS being ignored in IE & FFox but not Chrome

    - by Grant
    Hi, i am styling a navigation menu using the following css. I have found that it works perfectly in chrome but absolutely none of the css is beign applied in firefox or IE. Is there something obvious that i havent done or have done here? <style type="text/css"> #ddm { margin: 0; padding: 0; } #ddm li { float: left; list-style: none; font: 8pt Tahoma, Geneva, sans-serif; } #ddm li a { display: block; padding: 5px 12px; text-decoration: none; border-right: 1px solid white; width: 70px; white-space: nowrap; color:Red; border: none; } #ddm li a:hover { color:White; background-color:#444444; } #ddm li ul { margin: 0; padding: 0; position: absolute; visibility: hidden; } #ddm li ul li { float: none; display: inline } #ddm li ul li a { width: auto; } #ddm li ul li a:hover { } </style> <ul id="ddm"> <li> <ul> <li><a href="#">test 1</a></li> <li><a href="#">test 2</a></li> </ul> </li> </ul>

    Read the article

  • Better way of looping to detect change.

    - by Dremation
    As of now I'm using a while(true) method to detect changes in memory. The problem with this is it's kill the applications performance. I have a list of 30 pointers that need checked as rapidly as possible for changes, without sacrificing a huge performance loss. Anyone have ideas on this? memScan = new Thread(ScanMem); public static void ScanMem() { int i = addy.Length; while (true) { Thread.Sleep(30000); //I do this to cut down on cpu usage for (int j = 0; j < i; j++) { string[] values = addy[j].Split(new char[] { Convert.ToChar(",") }); //MessageBox.Show(values[2]); try { if (Memory.Scanner.getIntFromMem(hwnd, (IntPtr)Convert.ToInt32(values[0], 16), 32).ToString() != values[1].ToString()) { //Ok, it changed lets do our work //work if (Globals.Working) return; SomeFunction("Results: " + values[2].ToString(), "Memory"); Globals.Working = true; }//end if }//end try catch { } }//end for }//end while }//end void

    Read the article

  • inserting selected page from one word document in another word document with c#

    - by daemonkid
    I have a requirement to move selected pages from word DocumentA into another word DocumentB. So in the end DocumentB should have its own contents plus selected pages from DocumentA inserted at selected pages in DocumentB. The page number in DocumentB I will set thru properties. This is the code I am using to just append contents of DocumentA to DocumentB. object missing = System.Reflection.Missing.Value; Word._Application wordApp = new Word.Application(); Word._Document aDoc = new Word.Document(); try { wordApp.Visible = false; object readOnly = false; object isVisible = false; aDoc = wordApp.Documents.Open(ref fPath1, ref missing, ref readOnly, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref isVisible, ref missing, ref missing, ref missing, ref missing); Word.Selection selection = wordApp.Selection; selection.InsertFile(fPath2, ref missing, ref missing, ref missing, ref missing); aDoc.Save(); wordApp.Quit(ref missing, ref missing, ref missing); } catch(Exception ex) { throw new Exception(ex.Message); } finally { wordApp = null; aDoc = null; } However, I keep getting this exception 'object reference not set to instance of object' at the line 'selection.InsertFile...' What is going wrong here? And how do I insert contents of page 2 from DocumentA into page 3 of DocumentB? Thanks for your time.

    Read the article

  • How can I write an XSLT that will recursively include other files?

    - by Eric
    Let's say I have a series of xml files in this format: A.xml: <page> <header>Page A</header> <content>blAh blAh blAh</content> </page> B.xml: <page also-include="A.xml"> <header>Page B</header> <content>Blah Blah Blah</content> </page> Using this XSLT: <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/page"> <h1> <xsl:value-of select="header" /> </h1> <p> <xsl:value-of select="content" /> </p> </xsl:template> </xsl:stylesheet> I can turn A.xml into this: <h1> Page A </h1> <p> blAh blAh blAh </p> But how would I make it also turn B.xml into this? <h1> Page B </h1> <p> Blah Blah Blah </p> <p> blAh blAh blAh </p> I know that I need to use document(concat(@also-include,'.xml')) somewhere, but I'm not sure where. Oh, and the catch is, I need this to still work if B were to be included in a third file, C.xml. Any idea as to how to do this?

    Read the article

  • Convert asp.net webforms logic to asp.net MVC

    - by gmcalab
    I had this code in an old asp.net webforms app to take a MemoryStream and pass it as the Response showing a PDF as the response. I am now working with an asp.net MVC application and looking to do this this same thing, but how should I go about showing the MemoryStream as PDF using MVC? Here's my asp.net webforms code: private void ShowPDF(MemoryStream ms) { try { //get byte array of pdf in memory byte[] fileArray = ms.ToArray(); //send file to the user Page.Response.Cache.SetCacheability(HttpCacheability.NoCache); Page.Response.Buffer = true; Response.Clear(); Response.ClearContent(); Response.ClearHeaders(); Response.Charset = string.Empty; Response.ContentType = "application/pdf"; Response.AddHeader("content-length", fileArray.Length.ToString()); Response.AddHeader("Content-Disposition", "attachment;filename=TID.pdf;"); Response.BinaryWrite(fileArray); Response.Flush(); Response.Close(); } catch { // and boom goes the dynamite... } }

    Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >