Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 394/609 | < Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• In mysql I want to set lower_case_table_names=1 on existing databases to avoid cases-sensitivity issues accross multiple platforms

  - by sakhunzai

  In mysql I want to set lower_case_table_names=1 on existing databases to avoid cases-sensitivity issues accross multiple platforms. A) What are the risks ?( besides show table issue) B) After setting lower_case_table_names=1, will I be in position to query databases across multiple platforms consistantly ? select * from USERS == select * from users; C) How the triggers + stored procedure + functions + views + events will be affected in this regards. I know lower_case_table_names is only for "TABLE" names but how about triggers other database objects . Will they remain case-insensitive How about views ? D) Do I need to rename all tables before/after this configuration setting or this will do the miracle in one step (i.e lower_case_table_names=1 neutralize table names) ? E) What will be the exact steps WRT:mysqd / my.ini ?

  Read the article

• How can I set `less` or `more` max lines (scrollable height) limit/boundary in linux?

  - by Rudie

  (Sorry for the title. Any suggestions?) I've set my commandline PS1 to cover 3 lines: white space user, server and pwd $ or # to input I think less (or more?) is configured to break after window's height - 1, because when I do a $ git log, the first two lines are invisible at the top of the window and the rest is scrollable. I'm not sure who handles this scrolling and its configuration, but I assume GIT uses less/more. Where can I configure that my scrollable window is window height - 3 lines and not window height - 1? More info: If I cat lines.txt | less with a 23 line file, it shows the entire file and no scrolling. If I do the same with a 24 line file, it doesn't show line 1 (and no scrolling). With 25 lines: doesn't show lines 1 and 2 (and no scrolling). With 26 lines: shows line 1 and scrolling! The less breakpoint is at the wrong height...

  Read the article

• Debian SMB share having permission issues in windows 7

  - by xxpor

  Hi Everyone, I setup a Debian squeeze server with samba. I then shared my /media directory with the following configuration: [media] comment=Hard Drives read only = no locking = no path = /media guest ok = yes browsable = yes directory mask = 0777 When the drives are mapped in Windows 7, the user can write to all of the subdirectories of media (sdb1, sdc1, etc), but cannot write to any folders that they create themselves in the subdirectories of media. For example, if the user mapped /media/sdb1 to Z:, and then creates a folder Z:\test, the folder is created successfully, but no files can be written to Z:\test. If the user ssh's into the server, they have no problems writing to these directories. I have included the screenshots, in order, of what happens on Windows. This samba share is mounted with ntfs-3g, if it makes a difference. Screenshots are here

  Read the article

• what may cause unexpected log outs?

  - by lalebarde

  Sometimes, my Linux PC unexpectedly closes my session (log out) while I am working, and puts me back the login window. If I have terminal 1 logged with root and 2 logged with another user (without X), these ones are not logged out. For example, for the last three hours, it has happened five times. Other times, it leads to a reboot. So I have investigated: the UPS, but the behaviour is unchanged without it). the temperatures, but everything is fine (cpu, disks, video card). I have started to investigate also: the memory (partially tested - I have to run a full testyt next night). EDIT: totally tested and passed. My configuration is: Linux 2.6.37-tuxonice x86_64 Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz. Any idea please?

  Read the article

• Program for managing multiple monitors to keep from rearranging Windows

  - by Rumel

  I have a setup in use where I use up to four monitors. The problem is I generally switch around what I'm using and that messes up where all of my windows are. I'm on Windows 8 and have two graphics cards. My setup is as follows: Monitor 1: Card 1 Monitor 2: Card 1 Monitor 3: Card 2 TV 1: Card 2 I almost always have all the monitors turned on and in use. When I turn on the TV though, all of my windows get reconfigured and moved to different monitors. I don't know how to stop this. Another configuration I use is where I have Monitors 1 and 2 plus TV in use, and I have my Xbox in use on Monitor 3. When I get done with the Xbox and switch Monitor 3 over to the PC, everything is reconfigured. So is there a program out there that can help with this? I have the free version of Display Fusion in use but haven't seen settings to save monitor configurations.

  Read the article

• Kvpn on ubuntu 11.10 is stuck on 'Connecting'

  - by xupv5

  I recently installed open-vpn and it's gui, Kvpn, on my ubuntu system but after I load the configuration file and click 'Connect' it just runs through and gets stuck on 'Connecting', never actually getting connected. How do i get around this or what might i be doing wrong? The profile was set up using a .conf file and the network i'm trying to connect to needs only a username and password. I'm on a wi-fi connection, with one network card(also behind a university firewall, i suppose). Any help regarding connecting to a vpn on ubuntu would be much appreciated. Thanks!

  Read the article

• Where are iSCSI and volume information location on ESX 4.0?

  - by sec_goat

  Let me start by saying I am somewhat of a Vmware novice, I know just enought to manage and create servers at a basic level from the vSphere client. I have a VMWare server, ESX 4.0 connected over iSCSI to a SAN. The SAN is being used as storage for both RDMs and VMFS volumes. The SAN has died and I ordered a new one. Where can I see the settings related to the iSCSI and volume configuration so that I can try and replicate them on the new SAN when it arrives?

  Read the article

• Unistalled C++ Redistributables on Windows Vista

  - by VusP

  Windows Vista Service Pack2 32 bit I uninstalled C++ re-distrubutables (was not aware they are necessary for some applications to run) and I am facing error Cannot start application because the side-by-side configuration is not correct when i start applications like Avast, Revo Uninstaller etc. I came across this page. But the downloaded vcredist_86.exe doesn't seem to do much. It extracts itself and that's it nothing after that. No error nothing. I just finished installing 300+ MB updates on my system, so i don't want to use the System Restore option [And, I don't know which Restore Point to revert to]. Any other way to get this done?

  Read the article

• How I can be alerted if an application is not running in Windows 2008 R2?

  - by Magnetic_dud

  I have a critical application that I need to have it running on my server. Unfortunately it's poorly coded and it keeps crashing. If it's not running it's a big problem, but I can't use a simple application monitor like this because if the app crashes I need to input the configuration again - so I can't just run it again, I have to RDP into the server and manually start it again. So I need a monitor that sends me an email if the process has been stopped. Anyone knows a program that can do that job? I couldn't find it

  Read the article

• Problem installing Ubuntu 14.04 into a laptop using Windows 8.1

  - by AlexanderFreud

  I have used Ubuntu on my LG laptop for several years. I lately bought an Acer Aspire V5 laptop which included Windows 8.1. I don't have any data on it; I would like to just remove it completely (that horrible Windows 8.1) and install Ubuntu. I tried using a USB device with Ubuntu 14.04 (64bit version) saved on it. I changed the BIOS configuration, putting USB device first on boot order, Windows Boot Manager last. When I try to run with USB device it doesn't work. Messages like these show up: System doesn't have any USB boot option. Please select other boot option in Boot Manager Menu. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. insert your windows installation disc and restart your computer 2. choose your language settings, and then click "next" 3. click "repair your computer" If you do not have this disk, contact your system administrator manufacturer for assistance File \ubuntu\winboot\wubildr.mbr Status: 0xc000007b Info: the application or operating system couldn't be load...[?] required file is missing or contains errors. Could someone please write step-by-step procedures to install Ubuntu 14.04 after removing Windows 8.1 ? I already have done a second partition on the hard disk just in case.

  Read the article

• Adding expire headers to content served from CDN?

  - by mdolon

  I'm using MaxCDN to serve content to my blog using W3 Total Cache. The problem I'm running into when evaluating my site using Google Page Speed and YSlow! is that expire headers are not being sent on content delivered from the CDN, nor are they coming from a cookieless domain. Is this something that is completely in the hands of my CDN or is it something I can fix using my server configuration? Some info about my setup: nginx with php-fastcgi wordpress 3.0 w3 total cache 0.9a (dev release) MaxCDN the site: http://devgrow.com/

  Read the article

• If an entity is composed, is it still a god object?

  - by Telastyn

  I am working on a system to configure hardware. Unfortunately, there is tons of variety in the hardware, which means there's a wide variety of capabilities and configurations depending on what specific hardware the software connects to. To deal with this, we're using a Component Based Entity design where the "hardware" class itself is a very thin container for components that are composed at runtime based on what capabilities/configuration are available. This works great, and the design itself has worked well elsewhere (particularly in games). The problem is that all this software does is configure the hardware. As such, almost all of the code is a component of the hardware instance. While the consumer only ever works against the strongly typed interfaces for the components, it could be argued that the class that represents an instance of the hardware is a God Object. If you want to do anything to/with the hardware, you query an interface and work with it. So, even if the components of an object are modular and decoupled well, is their container a God Object and the downsides associated with the anti-pattern?

  Read the article

• Is it possible to boot already installed version of Ubuntu from within Win7, e.g. with a vm?

  - by Fizzik

  I have both Ubuntu 12.10 and Win7 installed. I use the former mostly for scientific simulations and the latter for applications. The problem I came across with this configuration is that the simulations take quite a while, and I'm not satisfied enough with solutions like Wine to run the Windows apps while the simulation runs. I would rather not install the simulation programs again, since it took quite an effort. So, is it possible to boot the already installed version of Ubuntu from within Windows 7 via VirtualBox or or something else?

  Read the article

• Apache RewriteRule ignoring RewriteCond?

  - by winsmith

  So I have an Apache running on OSX Server 10.4 (don't ask) with multiple sites. In 0002_[example.com].conf, I have this bit of code: <Directory "/Library/WebServer/Documents/secret/"> RewriteEngine On RewriteCond %{REMOTE_ADDR} !^137\.250\. RewriteRule .* /messages/secret.html </Directory> However, in this configuration, the RewriteCond always seems to evaluate to false, since the secret directory gets shown even if the client's address does not begin with 137.250. If I change the config to this <Directory "/Library/WebServer/Documents/secret/"> RewriteEngine On RewriteRule .* /messages/secret.html RewriteCond %{REMOTE_ADDR} !^137\.250\. </Directory> the condition either does not get evaluated at all or always evaluates to true. Either way, all clients get blocked. What am I doing wrong?

  Read the article

• Allowing ssh in iptables

  - by sat

  I am doing iptables firewall configuration. Actually, I need to allow ssh connection only from particular IP. But, It is blocking the ssh connection. I used the below commands. sat:~# iptables -F sat:~# iptables -A INPUT -p tcp -s src_ip_address -d my_ip_address --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT sat:~# iptables -A INPUT -j DROP sat:~# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- src_ip_address my_ip_address tcp dpt:22 state NEW,ESTABLISHED DROP all -- 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination If I try to connect from src_ip_address to my_ip_address, it is blocking the connection. Even, It is blocking from my_ip_address to src_ip_address . I haven't put any rules for OUTPUT chain. What is wrong with my commands? How to allow ssh in iptables?

  Read the article

• Alternatives to PHP [closed]

  - by kaz

  We are starting a project, which goal is to create new frontend interface to our product. Old version was created in PHP, very poorly written. We are choosing the language and frameworks that we want to use in new version. Requirements: New interface will be communicating with API. Application will not have it's own database. We don't have a big team, 3 max programmers for entire project. The main programmers are PHP veterans and knows some other technologies (Rails, C, C++, some Java) but not in professional level. But overall they are good and experienced programmers. So: We want to find a good alternative to PHP. I like Rails very much, but whole ActiveRecord model will be useless, when using application API. Java needs a lot of configuration and someone who is expert in Java to properly run this project. Also, in Java there are a lot of big and complicated enterprise frameworks - not very good for 2-3 programmers team. Python - I don't know Python and don't know good and experienced programmers who knows PY - but it's not so complicated and big as Java and maybe in long period it's good alternative for PHP. What are your thoughts?

  Read the article

• Is this a b43 driver problem?

  - by Nullet

  I have 13.04 on a Dell Inspiron 1564 with Broadcom 4312 WiFi card. The wl drivers cause kernel panic on linux-3.8 so I succesfully installed the b43 driver a couple of months ago. Now I have changed ISP and got a new router, and the connection drop when downloading software from internet to a 2008r2 using Remmina Client, and apt-get install on virtual machines in virtualbox. I have no idea why this suddenly became a problem.. My phone does not loose the connection, just Ubuntu. Output from /var/log/syslog after lost connection rfkill list(after disconnecting): 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes I can use NetworkManager to disable wireless and then enable wireless to connect again. rfkill ublock all/wifi/0 removes only Soft blocked. lshw -C network *-network description: Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4:00:78:d2:05 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.8.0-32-generic firmware=478.104 ip=10.0.0.3 link=yes multicast=yes wireless=IEEE lspci 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) After waking from suspend and when booting, it takes about 40 sec to get network connection. This has been a problem all along AND a different question, but I mention it anyway.. cus it's annoying! Please take a look and hopefully someone spot a problem! Thanks!

  Read the article

• Why my Firefox displays XML files as blank pages?

  - by n1313

  Every time I open an XML file, all I get is blank page instead of tag tree. The file itself is correct and loads okay, I can see it via View Source or in the Firebug. I've tried turning off all my addons, but the problem was not solved. All other browsers (Chrome, Opera) render the same file as an XML tree. I'm guessing that I've messed up my configuration somehow and Firefox now tries to render XML files as HTML ones. I've tried googling, but with no success. Help, please?

  Read the article

• Slow Gmail Attachment Download over HTTPS [closed]

  - by Todd

  It only affects Gmail. I have tested other HTTP, FTP and HTTPS websites and downloading is fine, at the exact same time the problem is affecting a Gmail attachment download. The symptoms include both: High waiting time, before the download starts (in the order of 30 seconds); AND Very slow download transfer speeds ( in the order of 1kbps) It's a very strange problem, and I didn't find any recent issues relating to Google Australia. The account works fine at another site with a different ISP, so it's either a computer configuration or ISP - I lean to the latter.

  Read the article

• ipv6 ssh tunnel service for testing?

  - by Geuis

  I need to do some testing on a service that I run to make sure that it can handle ipv6 addresses. Basically, I need to connect to it from an ipv6 address. I've created a tunnel via tunnelbroker.net, but I'm finding the steps required to get a tunnel configured on my machine and router to be a lot of trouble. Given that I'm not a networking specialist and that I haven't had to dig into routing configuration in years, I'd like to know if there's an existing service that I can just ssh into and use it as my ipv6 endpoint. Simply being able to curl or wget from such an endpoint to my service would be more than enough to test what I need. Thanks!

  Read the article

• Gui for viewing Apache headers

  - by user49249

  Is there any GUI for viewing Apache headers which are being served by a chain of Reverse Proxy Servers. I have a cloud which uses a few Proxy Servers in between the client and actual server which has to serve the original request. All servers are Unix Servers. And if there is a problem which I do not get a clue to then to be able to post them here downloading and doing an ftp of those headers with all the logs , loging in each time to each proxy server and Opening the browser and exporting the X display to some remote server each time from the chain and then observing HTTP_RESPONSES and checking the request from each of those servers and then posting log with configuration and response takes at least 2-3 hours to type an email. Is there a shorter way to do so?

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• how to trace an outlook mail not arriving to its destination when is sent to another domain?

  - by Alex. S.

  Hi, I have an domain account configured with Ipower.com. If I use an email client such as Evolution, the mails arrive as expected. However if I use Outlook 2007 (as everybody in this company) the mails only arrive if the destination belongs to the same domain. That means when the destination is a gmail address, for example, the test email falls into a sort of black hole... This is just a simple ipower setup, nothing of Exchange or something like that. What else can I do to isolate and fix this issue? This is driving me nuts because in other email client with the same exact configuration in the same machine, everything works well and I need to fix the thing in Outlook.

  Read the article

< Previous Page | 390 391 392 393 394 395 396 397 398 399 400 401  | Next Page >