Search Results

Search found 33468 results on 1339 pages for 'behaviour change'.

Page 395/1339 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• Encrypted Hidden Redux : Let's Get Salty

  - by HeartattacK

  In this article, Ashic Mahtab shows an elegant, reusable and unobtrusive way in which to persist sensitive data to the browser in hidden inputs and restoring them on postback without needing to change any code in controllers or actions. The approach is an improvement of his previous article and incorporates a per session salt during encryption. Note: Cross posted from Heartysoft.com. Permalink

  Read the article

• Massive Silverlight Giveaway! DevExpress , Syncfusion, Crypto Obfuscator and SL Spy!

  - by mbcrump

  Oh my, have we grown! Maybe I should change the name to Multiple Silverlight Giveaways. So far, my Silverlight giveaways have been such a success that I’m going to be able to give away more than one Silverlight product every month. Last month, we gave away 3 great products. 1) ComponentOne Silverlight Controls 2)  ComponentOne XAP Optimizer (with obfuscation) and 3) Silverlight Spy. This month, we will give away 4 great Silverlight products and have 4 different winners. This way the Silverlight community can grow with more than just one person winning all the prizes. This month we will be giving away: DevExpress Silverlight Controls – Over 50+ Silverlight Controls Syncfusion User Interface Edition - Create stunning line of business silverlight applications with a wide range of components including a high performance grid, docking manager, chart, gauge, scheduler and much more. Crypto Obfuscator – Works for all .NET including Silverlight/Windows Phone 7. Silverlight Spy – provides a license EVERY month for this giveaway. ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of one of the products listed above! 4 winners will be announced on April 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. – Use Google Reader, email or whatever is best for you.  Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump . Register here: http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit each of the vendors sites because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- DevExpress Silverlight Controls Let’s take a quick look at some of the software that is provided in this giveaway. Before we get started with the Silverlight Controls, here is a couple of links to bookmark for the DevExpress Silverlight Controls: The Live Demos of the Silverlight Controls is located here. Great Video Tutorials of the Silverlight Controls are here. One thing that I liked about the DevExpress is how easy it was to find demos of each control. After you install the controls the following Program Group appears complete with “demos” that include full-source.   So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. The Book – Very rich animation between switching pages. Very easy to add your own images and custom text. The Menu – This is another control that just looked great. You can easily add images to the menu items with a few lines of XAML. The Window / Dialog Box – You can use this control to make a very beautiful “Wizard” to help your users navigate between pages. This is useful in setup or installation. Calculator – This would be useful for any type of Banking app. Also a first that I’ve seen from a 3rd party Control company. DatePicker – This controls feels a lot smoother than the one provided by Microsoft. It also provides the ability to “Clear” the selection. Overall the DevExpress Silverlight Controls feature a lot of quality controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. If you win the contest you can simply enter your registration key and continue using the product without reinstalling. Syncfusion User Interface Edition Before we get started with the Syncfusion User Interface Edition, here is a couple of links to bookmark. The Live Demos can be found here. You can download a demo of it now at http://www.syncfusion.com/downloads/evalstart. After you install the Syncfusion, you can view the dashboard to run locally installed samples. You may also download the documentation to your local machine if needed. Since the name of the package is “User Interface Edition”, I decided to share several samples that struck me as “awesome”. Dashboard Gauges – I was very impressed with the various gauges they have included. The digital clock also looks very impressive. Diagram – The diagrams are also very easy to build. In the sample project below you can drag/drop the shapes onto the content pane. More complex lines like the Bezier lines are also easy to create using Syncfusion. Scheduling – Another strong component was the Scheduling with built-in support for Themes. Tools – If all of that wasn’t enough, it also comes with a nice pack of essential tools. Syncfusion has a nice variety of Silverlight Controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. Crypto Obfuscator The following feature set is what is important to me in an Obfuscator since I am a Silverlight/WP7 Developer: And thankfully this is what you get in Crypto Obfuscator. You can download a trial version right now if you want to go ahead and play with it. Let’s spend a few moments taking a look at the application. After you have installed Crypto Obfuscator you will see the following screen: After you click on Assemblies you have the option to add your .XAP file in: I went ahead and loaded my .xap file from a Silverlight Application. At this point, you can simply save your project and hit “Obfuscate” and your done. You don’t have to mess with any of the other settings if you don’t want too. Of course, you can change the settings and add obfuscation rules, watermarks and signing if you wish.  After Obfuscation, it looks like this in .NET Reflector: I was trying to browse through methods and it actually crashed Reflector. This confirms the level of protection the obfuscator is providing. If this were a commercial application that my team built, I would have a huge smile on my face right now. Crypto Obfuscator is a great product and I hope you will spend the time learning more about it. Silverlight Spy Silverlight Spy is a runtime inspector tool that will tell you pretty much everything that is going on with the application. Basically, you give it a URL that contains a Silverlight application and you can explore the element tree, events, xaml and so much more. This has already been reviewed on MichaelCrump.net. _________________________________________________________________________________________ Thanks for reading and don’t forget to leave a comment below in order to win one of the four prizes available! Subscribe to my feed

  Read the article

• Visual Studio 11 Release Candidate now available

  - by TATWORTH

  Microsoft have released Visual Studio 11 RC at http://www.microsoft.com/visualstudio/11/en-us/downloads#vsThis is a free download!"The available Visual Studio 2012 RC products and localizations are pre-release versions of the next release of Visual Studio. As such, they are not final and are subject to change prior to release. Before installing this pre-release software, you should review the associated readme files for system requirements and a list of known issues: "You should read the read me for VS11 RC

  Read the article

• How can I place a ProgressBar in Android using Cocos 2d?

  - by Laxmipriya

  I want to place a horizontal progress bar in my Android application and I want to change its progress color. I used the following code, but the progress bar is not being displayed. CCProgressTimer progressBar = CCProgressTimer.progress("progressbar.png"); progressBar.setType(kCCProgressTimerTypeHorizontalBarLR); progressBar.setScale(5); progressBar.setAnchorPoint(CGPoint.ccp(0, 0)); progressBar.setPosition(CGPoint.ccp(0,0)); addChild(progressBar);

  Read the article

• Why do I get this file loading exception when trying to draw sprites with libgdx?

  - by BluFire

  I'm having trouble with the "Drawing Images" section on the libgdx tutorial. I set up the documents completely and I typed the code as follows: public class Game implements ApplicationListener { public static final String LOG = Game.class.getSimpleName(); private FPSLogger fpsLogger; private SpriteBatch batch; private Texture texture; private Sprite sprite; private TextureRegion region; //removed irrelevant code for this question... @Override public void render() { texture = new Texture(Gdx.files.internal("android.png")); region = new TextureRegion(texture, 20, 20, 50, 50); sprite = new Sprite(texture, 20, 20, 50, 50); sprite.setPosition(10, 10); sprite.setRotation(45); Gdx.gl.glClearColor(0f, 1f, 0f, 1f); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); batch.begin(); batch.draw(texture,10,10); batch.draw(region,10,10); sprite.draw(batch); batch.end(); // output the current FPS fpsLogger.log(); } } I went through the tutorial on the website but when I run the code I get errors: Exception in thread "LWJGL Application" com.badlogic.gdx.utils.GdxRuntimeException: Couldn't load file: android.png at com.badlogic.gdx.graphics.Pixmap.<init>(Pixmap.java:137) at com.badlogic.gdx.graphics.glutils.FileTextureData.prepare(FileTextureData.java:55) at com.badlogic.gdx.graphics.Texture.load(Texture.java:175) at com.badlogic.gdx.graphics.Texture.create(Texture.java:159) at com.badlogic.gdx.graphics.Texture.<init>(Texture.java:133) at com.badlogic.gdx.graphics.Texture.<init>(Texture.java:122) at com.game.Game.render(Game.java:46) at com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop (LwjglApplication.java:163) at com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run(LwjglApplication.java:113) Caused by: com.badlogic.gdx.utils.GdxRuntimeException: File not found: android.png (Internal) at com.badlogic.gdx.files.FileHandle.read(FileHandle.java:108) at com.badlogic.gdx.files.FileHandle.length(FileHandle.java:364) at com.badlogic.gdx.files.FileHandle.readBytes(FileHandle.java:156) at com.badlogic.gdx.graphics.Pixmap.<init>(Pixmap.java:134) ... 8 more I set the android.png in my assests folder in my android project linking it to the desktop one, I don't understand what I'm doing wrong. What is making these errors? FIX. Weird ending.this was the plus where the sprite is suppose to look like. The top right corner of the next image should look like, the bottom left is what turned out in the code. I'm think it was because of the texture region but I'm not 100%. Can somebody explain why it is really warped? I thought the changes I made in the coding will just change position/rotation, rather then a change in the image.

  Read the article

• How to Use the Signature Editor in Outlook 2013

  - by Lori Kaufman

  The Signature Editor in Outlook 2013 allows you to create a custom signature from text, graphics, or business cards. We will show you how to use the various features of the Signature Editor to customize your signatures. To open the Signature Editor, click the File tab and select Options on the left side of the Account Information screen. Then, click Mail on the left side of the Options dialog box and click the Signatures button. For more details, refer to one of the articles mentioned above. Changing the font for your signature is pretty self-explanatory. Select the text for which you want to change the font and select the desired font from the drop-down list. You can also set the justification (left, center, right) for each line of text separately. The drop-down list that reads Automatic by default allows you to change the color of the selected text. Click OK to accept your changes and close the Signatures and Stationery dialog box. To see your signature in an email, click Mail on the Navigation Bar. Click New Email on the Home tab. The Message window displays and your default signature is inserted into the body of the email. NOTE: You shouldn’t use fonts that are not common in your signatures. In order for the recipient to see your signature as you intended, the font you choose also needs to be installed on the recipient’s computer. If the font is not installed, the recipient would see a different font, the wrong characters, or even placeholder characters, which are empty square boxes. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You can save it as a draft if you want, but it’s not necessary. If you decide to use a font that is not common, a better way to do so would be to create a signature as an image, or logo. Create your image or logo in an image editing program making it the exact size you want to use in your signature. Save the image in a file size as small as possible. The .jpg format works well for pictures, the .png format works well for detailed graphics, and the .gif format works well for simple graphics. The .gif format generally produces the smallest files. To insert an image in your signature, open the Signatures and Stationery dialog box again. Either delete the text currently in the editor, if any, or create a new signature. Then, click the image button on the editor’s toolbar. On the Insert Picture dialog box, navigate to the location of your image, select the file, and click Insert. If you want to insert an image from the web, you must enter the full URL for the image in the File name edit box (instead of the local image filename). For example, http://www.somedomain.com/images/signaturepic.gif. If you want to link to the image at the specified URL, you must also select Link to File from the Insert drop-down list to maintain the URL reference. The image is inserted into the Edit signature box. Click OK to accept your changes and close the Signatures and Stationery dialog box. Create a new email message again. You’ll notice the image you inserted into the signature displays in the body of the message. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You may want to put a link to a webpage or an email link in your signature. To do this, open the Signatures and Stationery dialog box again. Enter the text to display for the link, highlight the text, and click the Hyperlink button on the editor’s toolbar. On the Insert Hyperlink dialog box, select the type of link from the list on the left and enter the webpage, email, or other type of address in the Address edit box. You can change the text that will display in the signature for the link in the Text to display edit box. Click OK to accept your changes and close the dialog box. The link displays in the editor with the default blue, underlined text. Click OK to accept your changes and close the Signatures and Stationery dialog box. Here’s an example of an email message with a link in the signature. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You can also insert your contact information into your signature as a Business Card. To do so, click Business Card on the editor’s toolbar. On the Insert Business Card dialog box, select the contact you want to insert as a Business Card. Select a size for the Business Card image from the Size drop-down list. Click OK. The Business Card image displays in the Signature Editor. Click OK to accept your changes and close the Signatures and Stationery dialog box. When you insert a Business Card into your signature, the Business Card image displays in the body of the email message and a .vcf file containing your contact information is attached to the email. This .vcf file can be imported into programs like Outlook that support this format. Close the Message window using the File tab or the X button in the upper, right corner of the Message window. You can also insert your Business Card into your signature without the image or without the .vcf file attached. If you want to provide recipients your contact info in a .vcf file, but don’t want to attach it to every email, you can upload the .vcf file to a location on the internet and add a link to the file, such as “Get my vCard,” in your signature. NOTE: If you want to edit your business card, such as applying a different template to it, you must select a different View other than People for your Contacts folder so you can open the full contact editing window.     

  Read the article

• SQL SERVER – Creating All New Database with Full Recovery Model

  - by pinaldave

  Sometimes, complex problems have very simple solutions. Let us see the following email which I received recently. “Hi Pinal, In our system when we create new database, by default, they are all created with the Simple Recovery Model. We have to manually change the recovery model after we create the database. We used the following simple T-SQL code: CREATE DATABASE dbname. We are very frustrated with this situation. We want all our databases to have the Full Recovery Model option by default. We are considering the following methods; please suggest the most efficient one among them. 1) Creating a Policy; when it is violated, the database model can be fixed 2) Triggers at Server Level 3) Automated Job which goes through all the databases and checks their recovery model; if the DBA has not changed the model, then the job will list the Databases and change their recovery model Also, we have a situation where we need a database in the Simple Recovery Model as well – how to white list them? Please suggest the best method.” Indeed, an interesting email! The answer to their question, i.e., which is the best method to fit their needs (white list, default, etc)? It will be NONE of the above. Here is the solution in one line and also the easiest way: Just go to your Model database: Path in SSMS >> Databases > System Databases >> model >> Right Click Properties >> Options >> Recovery Model - Select Full from dropdown. Every newly created database takes its base template from the Model Database. If you create a custom SP in the Model Database, when you create a new database, it will automatically exist in that database. Any database that was already created before making changes in the Model Database will not be affected at all. Creating Policy is also a good method, and I will blog about this in a separate blog post, but looking at current specifications of the reader, I think the Model Database should be modified to have a Full Recovery Option. While writing this blog post, I remembered my another blog post where the model database log file was growing drastically even though there were no transactions SQL SERVER – Log File Growing for Model Database – model Database Log File Grew Too Big. NOTE: Please do not touch the Model Database unnecessary. It is a strict “No.” If you want to create an object that you need in all the databases, then instead of creating it in model database, I suggest that you create a new database called maintenance and create the object there. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, Readers Question, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Common header file for C++ and JavaScipt

  - by paperjam

  I have an app that runs a C++ server backend and Javascript on the client. I would like to define certain strings once only, for both pieces of code. For example, I might have a CSS class "row-hover" - I want to define this class name in one place only in case I change it later. Is there an easy way to include, or read, some sort of common definitions file into both C++ and JavaScript? Ideally as a compile / preprocessing step but any neat approach good.

  Read the article

• The Application Architecture Domain

  - by Michael Glas

  I have been spending a lot of time thinking about Application Architecture in the context of EA. More specifically, as an Enterprise Architect, what do I need to consider when looking at/defining/designing the Application Architecture Domain?There are several definitions of Application Architecture. TOGAF says “The objective here [in Application Architecture] is to define the major kinds of application system necessary to process the data and support the business”. FEA says the Application Architecture “Defines the applications needed to manage the data and support the business functions”.I agree with these definitions. They reflect what the Application Architecture domain does. However, they need to be decomposed to be practical.I find it useful to define a set of views into the Application Architecture domain. These views reflect what an EA needs to consider when working with/in the Applications Architecture domain. These viewpoints are, at a high level:Capability View: This view reflects how applications alignment with business capabilities. It is a super set of the following views when viewed in aggregate. By looking at the Application Architecture domain in terms of the business capabilities it supports, you get a good perspective on how those applications are directly supporting the business.Technology View: The technology view reflects the underlying technology that makes up the applications. Based on the number of rationalization activities I have seen (more specifically application rationalization), the phrase “complexity equals cost” drives the importance of the technology view, especially when attempting to reduce that complexity through standardization type activities. Some of the technology components to be considered are: Software: The application itself as well as the software the application relies on to function (web servers, application servers). Infrastructure: The underlying hardware and network components required by the application and supporting application software. Development: How the application is created and maintained. This encompasses development components that are part of the application itself (i.e. customizable functions), as well as bolt on development through web services, API’s, etc. The maintenance process itself also falls under this view. Integration: The interfaces that the application provides for integration as well as the integrations to other applications and data sources the application requires to function. Type: Reflects the kind of application (mash-up, 3 tiered, etc). (Note: functional type [CRM, HCM, etc.] are reflected under the capability view). Organization View: Organizations are comprised of people and those people use applications to do their jobs. Trying to define the application architecture domain without taking the organization that will use/fund/change it into consideration is like trying to design a car without thinking about who will drive it (i.e. you may end up building a formula 1 car for a family of 5 that is really looking for a minivan). This view reflects the people aspect of the application. It includes: Ownership: Who ‘owns’ the application? This will usually reflect primary funding and utilization but not always. Funding: Who funds both the acquisition/creation as well as the on-going maintenance (funding to create/change/operate)? Change: Who can/does request changes to the application and what process to the follow? Utilization: Who uses the application, how often do they use it, and how do they use it? Support: Which organization is responsible for the on-going support of the application? Information View: Whether or not you subscribe to the view that “information drives the enterprise”, it is a fact that information is critical. The management, creation, and organization of that information are primary functions of enterprise applications. This view reflects how the applications are tied to information (or at a higher level – how the Application Architecture domain relates to the Information Architecture domain). It includes: Access: The application is the mechanism by which end users access information. This could be through a primary application (i.e. CRM application), or through an information access type application (a BI application as an example). Creation: Applications create data in order to provide information to end-users. (I.e. an application creates an order to be used by an end-user as part of the fulfillment process). Consumption: Describes the data required by applications to function (i.e. a product id is required by a purchasing application to create an order. Application Service View: Organizations today are striving to be more agile. As an EA, I need to provide an architecture that supports this agility. One of the primary ways to achieve the required agility in the application architecture domain is through the use of ‘services’ (think SOA, web services, etc.). Whether it is through building applications from the ground up utilizing services, service enabling an existing application, or buying applications that are already ‘service enabled’, compartmentalizing application functions for re-use helps enable flexibility in the use of those applications in support of the required business agility. The applications service view consists of: Services: Here, I refer to the generic definition of a service “a set of related software functionalities that can be reused for different purposes, together with the policies that should control its usage”. Functions: The activities within an application that are not available / applicable for re-use. This view is helpful when identifying duplication functions between applications that are not service enabled. Delivery Model View: It is hard to talk about EA today without hearing the terms ‘cloud’ or shared services.  Organizations are looking at the ways their applications are delivered for several reasons, to reduce cost (both CAPEX and OPEX), to improve agility (time to market as an example), etc.  From an EA perspective, where/how an application is deployed has impacts on the overall enterprise architecture. From integration concerns to SLA requirements to security and compliance issues, the Enterprise Architect needs to factor in how applications are delivered when designing the Enterprise Architecture. This view reflects how applications are delivered to end-users. The delivery model view consists of different types of delivery mechanisms/deployment options for applications: Traditional: Reflects non-cloud type delivery options. The most prevalent consists of an application running on dedicated hardware (usually specific to an environment) for a single consumer. Private Cloud: The application runs on infrastructure provisioned for exclusive use by a single organization comprising multiple consumers. Public Cloud: The application runs on infrastructure provisioned for open use by the general public. Hybrid: The application is deployed on two or more distinct cloud infrastructures (private, community, or public) that remain unique entities, but are bound together by standardized or proprietary technology that enables data and application portability. While by no means comprehensive, I find that applying these views to the application domain gives a good understanding of what an EA needs to consider when effecting changes to the Application Architecture domain.Finally, the application architecture domain is one of several architecture domains that an EA must consider when developing an overall Enterprise Architecture. The Oracle Enterprise Architecture Framework defines four Primary domains: Business Architecture, Application Architecture, Information Architecture, and Technology Architecture. Each domain links to the others either directly or indirectly at some point. Oracle links them at a high level as follows:Business Capabilities and/or Business Processes (Business Architecture), links to the Applications that enable the capability/process (Applications Architecture – COTS, Custom), links to the Information Assets managed/maintained by the Applications (Information Architecture), links to the technology infrastructure upon which all this runs (Technology Architecture - integration, security, BI/DW, DB infrastructure, deployment model). There are however, times when the EA needs to narrow focus to a particular domain for some period of time. These views help me to do just that.

  Read the article

• Brendan Gregg's "Systems Performance: Enterprise and the Cloud"

  - by user12608550

  Long ago, the prerequisite UNIX performance book was Adrian Cockcroft's 1994 classic, Sun Performance and Tuning: Sparc & Solaris, later updated in 1998 as Java and the Internet. As Solaris evolved to include the invaluable DTrace observability features, new essential performance references have been published, such as Solaris Performance and Tools: DTrace and MDB Techniques for Solaris 10 and OpenSolaris (2006)  by McDougal, Mauro, and Gregg, and DTrace: Dynamic Tracing in Oracle Solaris, Mac OS X and FreeBSD (2011), also by Mauro and Gregg. Much has occurred in Solaris Land since those books appeared, notably Oracle's acquisition of Sun Microsystems in 2010 and the demise of the OpenSolaris community. But operating system technologies have continued to improve markedly in recent years, driven by stunning advances in multicore processor architecture, virtualization, and the massive scalability requirements of cloud computing. A new performance reference was needed, and I eagerly waited for something that thoroughly covered modern, distributed computing performance issues from the ground up. Well, there's a new classic now, authored yet again by Brendan Gregg, former Solaris kernel engineer at Sun and now Lead Performance Engineer at Joyent. Systems Performance: Enterprise and the Cloud is a modern, very comprehensive guide to general system performance principles and practices, as well as a highly detailed reference for specific UNIX and Linux observability tools used to examine and diagnose operating system behaviour.  It provides thorough definitions of terms, explains performance diagnostic Best Practices and "Worst Practices" (called "anti-methods"), and covers key observability tools including DTrace, SystemTap, and all the traditional UNIX utilities like vmstat, ps, iostat, and many others. The book focuses on operating system performance principles and expands on these with respect to Linux (Ubuntu, Fedora, and CentOS are cited), and to Solaris and its derivatives [1]; it is not directed at any one OS so it is extremely useful as a broad performance reference. The author goes beyond the intricacies of performance analysis and shows how to interpret and visualize statistical information gathered from the observability tools.  It's often difficult to extract understanding from voluminous rows of text output, and techniques are provided to assist with summarizing, visualizing, and interpreting the performance data. Gregg includes myriad useful references from the system performance literature, including a "Who's Who" of contributors to this great body of diagnostic tools and methods. This outstanding book should be required reading for UNIX and Linux system administrators as well as anyone charged with diagnosing OS performance issues.  Moreover, the book can easily serve as a textbook for a graduate level course in operating systems [2]. [1] Solaris 11, of course, and Joyent's SmartOS (developed from OpenSolaris) [2] Gregg has taught system performance seminars for many years; I have also taught such courses...this book would be perfect for the OS component of an advanced CS curriculum.

  Read the article

• SQL SERVER – Data Sources and Data Sets in Reporting Services SSRS

  - by Pinal Dave

  This example is from the Beginning SSRS by Kathi Kellenberger. Supporting files are available with a free download from the www.Joes2Pros.com web site. This example is from the Beginning SSRS. Supporting files are available with a free download from the www.Joes2Pros.com web site. Connecting to Your Data? When I was a child, the telephone book was an important part of my life. Maybe I was just a nerd, but I enjoyed getting a new book every year to page through to learn about the businesses in my small town or to discover where some of my school acquaintances lived. It was also the source of maps to my town’s neighborhoods and the towns that surrounded me. To make a phone call, I would need a telephone number. In order to find a telephone number, I had to know how to use the telephone book. That seems pretty simple, but it resembles connecting to any data. You have to know where the data is and how to interact with it. A data source is the connection information that the report uses to connect to the database. You have two choices when creating a data source, whether to embed it in the report or to make it a shared resource usable by many reports. Data Sources and Data Sets A few basic terms will make the upcoming choses make more sense. What database on what server do you want to connect to? It would be better to just ask… “what is your data source?” The connection you need to make to get your reports data is called a data source. If you connected to a data source (like the JProCo database) there may be hundreds of tables. You probably only want data from just a few tables. This means you want to write a specific query against this data source. A query on a data source to get just the records you need for an SSRS report is called a Data Set. Creating a local Data Source You can connect embed a connection from your report directly to your JProCo database which (let’s say) is installed on a server named Reno. If you move JProCo to a new server named Tampa then you need to update the Data Set. If you have 10 reports in one project that were all pointing to the JProCo database on the Reno server then they would all need to be updated at once. It’s possible to make a project level Data Source and have each report use that. This means one change can fix all 10 reports at once. This would be called a Shared Data Source. Creating a Shared Data Source The best advice I can give you is to create shared data sources. The reason I recommend this is that if a database moves to a new server you will have just one place in Report Manager to make the server name change. That one change will update the connection information in all the reports that use that data source. To get started, you will start with a fresh project. Go to Start > All Programs > SQL Server 2012 > Microsoft SQL Server Data Tools to launch SSDT. Once SSDT is running, click New Project to create a new project. Once the New Project dialog box appears, fill in the form, as shown in. Be sure to select Report Server Project this time – not the wizard. Click OK to dismiss the New Project dialog box. You should now have an empty project, as shown in the Solution Explorer. A report is meant to show you data. Where is the data? The first task is to create a Shared Data Source. Right-click on the Shared Data Sources folder and choose Add New Data Source. The Shared Data Source Properties dialog box will launch where you can fill in a name for the data source. By default, it is named DataSource1. The best practice is to give the data source a more meaningful name. It is possible that you will have projects with more than one data source and, by naming them, you can tell one from another. Type the name JProCo for the data source name and click the Edit button to configure the database connection properties. If you take a look at the types of data sources you can choose, you will see that SSRS works with many data platforms including Oracle, XML, and Teradata. Make sure SQL Server is selected before continuing. For this post, I am assuming that you are using a local SQL Server and that you can use your Windows account to log in to the SQL Server. If, for some reason you must use SQL Server Authentication, choose that option and fill in your SQL Server account credentials. Otherwise, just accept Windows Authentication. If your database server was installed locally and with the default instance, just type in Localhost for the Server name. Select the JProCo database from the database list. At this point, the connection properties should look like. If you have installed a named instance of SQL Server, you will have to specify the server name like this: Localhost\InstanceName, replacing the InstanceName with whatever your instance name is. If you are not sure about the named instance, launch the SQL Server Configuration Manager found at Start > All Programs > Microsoft SQL Server 2012 > Configuration Tools. If you have a named instance, the name will be shown in parentheses. A default instance of SQL Server will display MSSQLSERVER; a named instance will display the name chosen during installation. Once you get the connection properties filled in, click OK to dismiss the Connection Properties dialog box and OK again to dismiss the Shared Data Source properties. You now have a data source in the Solution Explorer. What’s next I really need to thank Kathi Kellenberger and Rick Morelan for sharing this material for this 5 day series of posts on SSRS. To get really comfortable with SSRS you will get to know the different SSDT windows, Build reports on your own (without the wizards),  Add report headers and footers, Accept user input,  create levels, charts, or even maps for visual appeal. You might be surprise to know a small 230 page book starts from the very beginning and covers the steps to do all these items. Beginning SSRS 2012 is a small easy to follow book so you can learn SSRS for less than $20. See Joes2Pros.com for more on this and other books. If you want to learn SSRS in easy to simple words – I strongly recommend you to get Beginning SSRS book from Joes 2 Pros. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: Reporting Services, SSRS

  Read the article

• How do I get the brightness control working on a Lenovo Yoga 13?

  - by Viktor Ax

  Brightness control doesn't work by default in Ubuntu 13.04. Solution for 12.10 doesn't work, also as this Any idea how to fix it? Update: After research I found how to change brightness manually. What need to do is to type in terminal: echo 2000 | sudo tee /sys/class/backlight/intel_backlight/brightness It will reduce brightness by half, but still would be good to find solution which will allow to use keyboard for changing brightness. Update2: Found solution, see below

  Read the article

• Some problems with the keyboard layout

  - by user203053

  When I press some keys, sometimes some letters are replaced by others. For example e is replaced with "0we" and c with "x9a". Also other keys are changed. My keyboard layout is actually German. But whenever this problem occurs, it changes to English and I cannot change it back. Occasionally everything works fine. How do I find out whether the keyboard is damaged or just some settings are not right?

  Read the article

• Why Clonezilla needs to reinstall grub?

  - by Pablo

  By default CloneZilla Live will reinstall grub after restore. In my particular case I am restoring a disk image to same phisical disk without any partitioning/size change. I am expecting to have exact same state as I had right after backup. However, reinstalling grub will render my system to unbootable. If I remove that option [-g] then everything is fine. My question is in what cases and why CloneZilla ever need to re-install grub when restoring disk image?

  Read the article

• Are there advantages to using a DVCS for a solo developer?

  - by SnOrfus

  Right now, I use visual svn on my server, and have ankhsvn/tortoise on my personal machine. It works fine enough, and I don't have to change, but if I can see some benefits of using a DVCS, then I might give it a go. However, if there's no point or difference using it without other people, then I won't bother. So again, I ask, are there any benefits to using a DVCS when you're the only developer?

  Read the article

• JavaScript or PHP based WYSIWYG vector based image editor

  - by Jeroen Pluimers

  For a PHP based site of a client, I'm looking for a vector based image editor that allows: end user creation of vectored images consisting of objects supports upload of bitmap images to be used as objects inside the vector image supports adding text objects to add to the vector image, and change properties (font name, font style, font size) of the text objects preferably supports layering or grouping of objects inside the vector image integrates nicely with a PHP based site (so a PHP or JavaScript library is preferred) can store the vector image in SVG, EPS or PDF Both commercial and FOSS solutions are OK. Any idea where to find such a library? --jeroen

  Read the article

• Advice on designing a robust program to handle a large library of meta-information & programs

  - by Sam Bryant

  So this might be overly vague, but here it is anyway I'm not really looking for a specific answer, but rather general design principles or direction towards resources that deal with problems like this. It's one of my first large-scale applications, and I would like to do it right. Brief Explanation My basic problem is that I have to write an application that handles a large library of meta-data, can easily modify the meta-data on-the-fly, is robust with respect to crashing, and is very efficient. (Sorta like the design parameters of iTunes, although sometimes iTunes performs more poorly than I would like). If you don't want to read the details, you can skip the rest Long Explanation Specifically I am writing a program that creates a library of image files and meta-data about these files. There is a list of tags that may or may not apply to each image. The program needs to be able to add new images, new tags, assign tags to images, and detect duplicate images, all while operating. The program contains an image Viewer which has tagging operations. The idea is that if a given image A is viewed while the library has tags T1, T2, and T3, then that image will have boolean flags for each of those tags (depending on whether the user tagged that image while it was open in the Viewer). However, prior to being viewed in the Viewer, image A would have no value for tags T1, T2, and T3. Instead it would have a "dirty" flag indicating that it is unknown whether or not A has these tags or not. The program can introduce new tags at any time (which would automatically set all images to "dirty" with respect to this new tag) This program must be fast. It must be easily able to pull up a list of images with or without a certain tag as well as images which are "dirty" with respect to a tag. It has to be crash-safe, in that if it suddenly crashes, all of the tagging information done in that session is not lost (though perhaps it's okay to loose some of it) Finally, it has to work with a lot of images (10,000) I am a fairly experienced programmer, but I have never tried to write a program with such demanding needs and I have never worked with databases. With respect to the meta-data storage, there seem to be a few design choices: Choice 1: Invidual meta-data vs centralized meta-data Individual Meta-Data: have a separate meta-data file for each image. This way, as soon as you change the meta-data for an image, it can be written to the hard disk, without having to rewrite the information for all of the other images. Centralized Meta-Data: Have a single file to hold the meta-data for every file. This would probably require meta-data writes in intervals as opposed to after every change. The benefit here is that you could keep a centralized list of all images with a given tag, ect, making the task of pulling up all images with a given tag very efficient

  Read the article

• Case Management Patterns with Oracle Unified Business Process Management Suite

  - by Ajay Khanna

  Contributed by Heidi Buelow, Oracle Product Management Case Management was a hot topic all week at Oracle OpenWorld so I was excited to share our current features and upcoming plans at the session Thursday morning on Case Management Patterns with Oracle Unified Business Process Management Suite.  My colleague, Ravi Rangaswamy, the Case Management Development Manager, and I, Heidi Buelow, the Case Management Product Manager, discussed case management use case patterns with an interested audience.  We also talked about the current BPM Suite offering for Case Managment and showed a demo of our upcoming release where Case Management becomes a first class component in a BPM composite application. Case Management use case patterns cover a wide range of horizontal applications such as Accounts Payable, Dispute Resolution, Call Center, Employee OnBoarding, and many vertical applications in domains and industries such as Public Sector services, Insurance claims, and Healthcare.  Really, it is any use case where the resolution of a request may require a knowledge worker making decisions using experienced judgement in the current situation.  This allows for expidited care and customer satisfaction, both being highly valued for consumer loyalty, regulatory compliance, and efficient resolution. Today, BPM Suite provides the tools for creating Case Management applications using BPMN 2.0, Business Rules, and rich BAM and Case Analytics.  The Process Composer provides the agility to change rules and processes by the business users.  The case manager and case workers have the flexibilty they need.  With integrated content management and the concept of a BPM Process Spaces instance (case) space, the current release enables case management use case applications. In the next release, Case Management becomes a first class component. By this, we mean, Case is a separate component in the composite.  We are adding case attributes such as milestones, case events, case stakeholders, and more, providing a rich toolset for the use cases that require a flexible Case Management approach.  Activites become available according to the conditions that you specify and information can be protected by permissions indicated.  In BPM Studio, you design a Case and associate all of the attributes and activities that are needed, yet, at runtime you have the flexibility to add and change these as needed. We enjoyed sharing Case Management and it was well received by the audience.  The presentation is available online and we have viewlets of the demo that will be available at release time.

  Read the article

• Turn off keyboard back-light Sony (VAIO SVF1521DCXW)

  - by KasiyA

  I have a Sony laptop and I want to turn keyboard back-light off. It doesn't have a shortcut function key for doing this on the keyboard . I can turn off it with VAIO Control Center in Windows but I don't know how can I turn it off in Ubuntu 14.04. There isn't available to me: /sys/devices/platform/sony-laptop/kbd_backlight doesn't exist on my machine. I have this folder /sys/devices/platform/sony-laptop/ and there is three folder one power folder and two shortcut-ed folder driver , subsystem and five file contains battery_care_health , battery_care_limiter , modalias , touchpad and event This is the output of running sudo modinfo sony-laptop: filename: /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko version: 0.6 license: GPL description: Sony laptop extras driver (SPIC and SNC ACPI device) author: Stelian Pop, Mattia Dongili srcversion: 5C6E050349475558A231C59 alias: acpi*:SNY6001:* alias: acpi*:SNY5001:* depends: intree: Y vermagic: 3.13.0-34-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 50:0B:C5:C8:7D:4B:11:5C:F3:C1:50:4F:7A:92:E2:33:C6:14:3D:58 sig_hashalgo: sha512 parm: debug:set this to 1 (and RTFM) if you want to help the development of this driver (int) parm: no_spic:set this if you don't want to enable the SPIC device (int) parm: compat:set this if you want to enable backward compatibility mode (int) parm: mask:set this to the mask of event you want to enable (see doc) (ulong) parm: camera:set this to 1 to enable Motion Eye camera controls (only use it if you have a C1VE or C1VN model) (int) parm: minor:minor number of the misc device for the SPIC compatibility code, default is -1 (automatic) (int) parm: kbd_backlight:set this to 0 to disable keyboard backlight, 1 to enable it (default: no change from current value) (int) parm: kbd_backlight_timeout:meaningful values vary from 0 to 3 and their meaning depends on the model (default: no change from current value) (int) With the suggested command: sudo modprobe -r sony_laptop sudo modprobe -v sony_laptop kbd_backlight=0 Output was: insmod /lib/modules/3.13.0-34-generic/kernel/drivers/platform/x86/sony-laptop.ko kbd_backlight=0 It doesn't seem to affect the keyboard backlight. And also trying this command: sudo modprobe -v sony_laptop kbd_backlight_timeout=3 kbd_backlight=0 and doesn't seem to effect the keyboard backlight I also test it after restart laptop, And I didn't see any effect too. Important : By default, keyboard backlight is off; when I press a key it turns on and after 15 seconds it turns off again. It's the same result on battery and AC power I followed also http://ubuntuforums.org/showthread.php?t=2139597 and Keyboard backlighting not working on a Vaio VPCSB11FX but didn't work so.

  Read the article

• My mouse pointer disappears on "system surfaces" , like background picture, menus, background for all kind of system menus

  - by Siegfried

  I have an annoying problem with Ubuntu 11.10, my mouse pointer disappears on the Ubuntu surface ( not in programs like firefox, libre office ..) The mouse pointer is there, but its size is only one pixel and in the white background of e.g. "system" it is not seen at all, although with "ctrl" I can see where it should be. I have not found any place where I can change the size or colors of the mouse pointer. Can anybody help me?

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Schema Generation with Input Parameters

  - by Stuart Brierley

  As previsouly noted in my post on Schema Generation using the Community ODBC Adapter, I ran into a problem when trying to generate a schema to represent a MySQL stored procedure that had input parameters.  After a bit of investigation and a few deadends I managed to figure out a way around this issue - detailed below are both the problem and solution in case you ever run into this yourself. The Problem Imagine a stored procedure that is coded as follows in MySQL: StuTest(in DStr varchar(80)) BEGIN   Declare GRNID int;   Select grn_id into GRNID from grn_header where distribution_number = DStr;   Select GRNID; END This is quite a simple stored procedure but can be used to illustrate the issue with parameters quite niceley. When generating the schema using the Add Generated Items wizard, I tried selecting "Stored Procedure" and then in the Statement Information window typing the stored procedure name: StuTest Pressing generate then gives the following error: "Incorrect Number of arguments for Procedure StuTest; expected 1, got 0" If you attempt to supply a value for the parameter you end up with a schema that will only ever supply the parameter value that you specify.  For example supplying StuTest('123') will always call the procedure with a parameter value of 123. The Solution   I tried contacting Two Connect about this, but their experience of testing the adapter with MySQL was limited. After looking through the code for the ODBC adapter myself and trying a few things out, I was eventually able to use the ODBC adapter to call a test stored procedure using a two way send port. In the generate schema wizard instead of selecting Stored Procedure I had to choose SQL Script instead, detailing the following script: Call StuTest(@InputParameter) By default this would create a request schema with an attribute called InputParameter, with a SQL type of NVarChar(1).  In most cases this is not going to be correct for the stored procedure being called. To change the type from the default that is applied you need to select the "Override default query processing" check box when specifying the script in the wizard.  This then opens the BizTalk ODBC Override window which lets you change the properties of the parameters and also test out the query script.  Once I had done this I was then able to generate the correct schema, which included an attribute representing the parameter.  By deploying the schema assembly I was then able to try the ODBC adapter out on a two way send port. When supplied with an appropriate message instance (for the generated request schema) this send port successfully returned the expected response.

  Read the article

• Is having several desktop environments on one account bad?

  - by Joseph_carp

  I have gnome classic, cinnamon, unity, gnome 3, and KDE installed on my only user account because I enjoy a little change from time to time (although my favorite is gnome classic) so I installed all of these desktop environments. I heard from a friend that it could potentially cause some problems. I was also told that it would be okay if I created a separate account for each environment, but I don't want to if I don't have to. Any help is much appreciated, thank you.

  Read the article

• 13.04 Logitech bluetooth speaker adapter pairing but no mixer output

  - by user1455622

  I had to change [General] Enable = Socket in /etc/bluetooth/audio.conf to get it to pair. But now that they are I don't get an output in pavucontrol. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPAG on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPHS on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSource on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSink on adapter /org/bluez/3855/hci0. E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: Unknown Bluetooth minor device class 0 D: [pulseaudio] module-card-restore.c: Not restoring profile for card bluez_card.C8_84_47_15_B7_34, because already set. I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card bluez_card.C8_84_47_15_B7_34. I: [pulseaudio] card.c: Created 2 "bluez_card.C8_84_47_15_B7_34" W: [pulseaudio] module-bluetooth-device.c: Profile has no transport D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] card.c: Changed profile of card 2 "bluez_card.C8_84_47_15_B7_34" to off I: [pulseaudio] module.c: Loaded "module-bluetooth-device" (index: #22; argument: "address=C8:84:47:15:B7:34 profile=a2dp"). I: [alsa-source] alsa-source.c: Scheduling delay of 10,06ms, you might want to investigate this to improve latency... I: [alsa-source] ratelimit.c: 5 events suppressed I: [alsa-source] alsa-source.c: Overrun! I: [alsa-source] alsa-source.c: Increasing minimal latency to 2,00 ms D: [alsa-source] alsa-source.c: latency set to 20,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=62008 D: [alsa-source] alsa-source.c: setting avail_min=442 What can I do to get it working? Regards,

  Read the article

• SQL University: What and why of database testing

  - by Mladen Prajdic

  This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 2 – Tools of the trade With that out of the way let us sharpen our pencils and get going. Why test a database The sad state of the industry today is that there is very little emphasis on testing in general. Test driven development is still a small niche of the programming world while refactoring is even smaller. The cause of this is the inability of developers to convince themselves and their managers that writing tests is beneficial. At the moment they are mostly viewed as waste of time. This is because the average person (let’s not fool ourselves, we’re all average) is unable to think about lower future costs in relation to little more current work. It’s orders of magnitude easier to know about the current costs in relation to current amount of work. That’s why programmers convince themselves testing is a waste of time. However we have to ask ourselves what tests are really about? Maybe finding bugs? No, not really. If we introduce bugs, we’re likely to write test around those bugs too. But yes we can find some bugs with tests. The main point of tests is to have reproducible repeatability in our systems. By having a code base largely covered by tests we can know with better certainty what a small code change can break in other parts of the system. By having repeatability we can make code changes with confidence, since we know we’ll see what breaks in other tests. And here comes the inability to estimate future costs. By spending just a few more hours writing those tests we’d know instantly what broke where. Imagine we fix a reported bug. We check-in the code, deploy it and the users are happy. Until we get a call 2 weeks later about a certain monthly process has stopped working. What we don’t know is that this process was developed by a long gone coworker and for some reason it relied on that same bug we’ve happily fixed. There’s no way we could’ve known that. We say OK and go in and fix the monthly process. But what we have no clue about is that there’s this ETL job that relied on data from that monthly process. Now that we’ve fixed the process it’s giving unexpected (yet correct since we fixed it) data to the ETL job. So we have to fix that too. But there’s this part of the app we coded that relies on data from that exact ETL job. And just like that we enter the “Loop of maintenance horror”. With the loop eventually comes blame. Here’s a nice tip for all developers and DBAs out there: If you make a mistake man up and admit to it. All of the above is valid for any kind of software development. Keeping this in mind the database is nothing other than just a part of the application. But a big part! One reason why testing a database is even more important than testing an application is that one database is usually accessed from multiple applications and processes. This makes it the central and vital part of the enterprise software infrastructure. Knowing all this can we really afford not to have tests? What to test in a database Now that we’ve decided we’ll dive into this testing thing we have to ask ourselves what needs to be tested? The short answer is: everything. The long answer is: read on! There are 2 main ways of doing tests: Black box and White box testing. Black box testing means we have no idea how the system internals are built and we only have access to it’s inputs and outputs. With it we test that the internal changes to the system haven’t caused the input/output behavior of the system to change. The most important thing to test here are the edge conditions. It’s where most programs break. Having good edge condition tests we can be more confident that the systems changes won’t break. White box testing has the full knowledge of the system internals. With it we test the internal system changes, different states of the application, etc… White and Black box tests should be complementary to each other as they are very much interconnected. Testing database routines includes testing stored procedures, views, user defined functions and anything you use to access the data with. Database routines are your input/output interface to the database system. They count as black box testing. We test then for 2 things: Data and schema. When testing schema we only care about the columns and the data types they’re returning. After all the schema is the contract to the out side systems. If it changes we usually have to change the applications accessing it. One helpful T-SQL command when doing schema tests is SET FMTONLY ON. It tells the SQL Server to return only empty results sets. This speeds up tests because it doesn’t return any data to the client. After we’ve validated the schema we have to test the returned data. There no other way to do this but to have expected data known before the tests executes and comparing that data to the database routine output. Testing Authentication and Authorization helps us validate who has access to the SQL Server box (Authentication) and who has access to certain database objects (Authorization). For desktop applications and windows authentication this works well. But the biggest problem here are web apps. They usually connect to the database as a single user. Please ensure that that user is not SA or an account with admin privileges. That is just bad. Load testing ensures us that our database can handle peak loads. One often overlooked tool for load testing is Microsoft’s OSTRESS tool. It’s part of RML utilities (x86, x64) for SQL Server and can help determine if our database server can handle loads like 100 simultaneous users each doing 10 requests per second. SQL Profiler can also help us here by looking at why certain queries are slow and what to do to fix them.   One particular problem to think about is how to begin testing existing databases. First thing we have to do is to get to know those databases. We can’t test something when we don’t know how it works. To do this we have to talk to the users of the applications accessing the database, run SQL Profiler to see what queries are being run, use existing documentation to decipher all the object relationships, etc… The way to approach this is to choose one part of the database (say a logical grouping of tables that go together) and filter our traces accordingly. Once we’ve done that we move on to the next grouping and so on until we’ve covered the whole database. Then we move on to the next one. Database Testing is a topic that we can spent many hours discussing but let this be a nice intro to the world of database testing. See you in the next post.

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >