Search Results

Search found 11003 results on 441 pages for 'usb storage'.

Page 395/441 | < Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• Choice of filesystem for GNU/Linux on an SD card

  - by gspr

  Hi. I have am embedded ARM-based system running on an SD card. It's currently Debian GNU/Linux using ext3 as filesystem. As I'm about to reinstall the system, I started wondering about changing to a more flash-friendly filesystem. I've heard about JFFS2, YAFFS2 and LogFS, and they all seem suited to the job. Which one would you recommend? Also, I've heard there have been a lot of ext4 improvements to better suit SSD disks; am I to interpret that as running ext4 should be just fine? What do I need to think especially about in that case? I guess the usage of the system is important. But for the sake of generality, imagine it'll do standard desktop stuff (even though it is infact a small ARM-based system). Thanks for any replies. Edit: Wikipedia tells me (in a "citation needed" statement) that Removable flash memory cards and USB flash drives have built-in controllers to perform wear leveling and error correction so use of a specific flash file system does not add any benefit. Thus, I'm leaning towards sticking with an ext filesystem.

  Read the article

• How to repair a corrupted Excel file

  - by SjoerdV

  I'm trying to restore some files for a friend who messed up a USB stick by pulling it out of the computer too soon. By searching invisible partitions I was able to restore the files. All files are intact, except 1 excel file that seems to be corrupted. I've googled about ways to repair an Excel file, because the default repair options in Excel 2003-2010 do not work for this file. I've came across a numerous third-party apps, of which the one seemes to be able to do the job: Recovery Toolbox for Excel. Of-course, this and all other apps I found require a purchase to actually repair the file. It seems a bit silly to pay 30 dollars for a one time thing, and something that is not for myself. So, I would like to keep that as a last-resort option. Is there anything I can try to fix this? I've attached a screenshot of how the file looks when I open it on my OSX when converted to a HTML file (to view the code), for the option that it could be a character set problem.

  Read the article

• SSD as primary or secondary drive on a small Linux server?

  - by Alex Martelli

  I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters). I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often). So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make). However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser... thanks in advance for advice about this choice!

  Read the article

• How to safely move where itunes saves music/iphone apps/and meta data to another internal Drive?

  - by GingerLee

  In the past, when I have moved my itunes data from one computer to another, I usually just follow these steps: Copy the contents of two folders: %USERPROFILE%\Music\iTunes %USERPROFILE%\AppData\Roaming\Apple Computer 1) Install iTunes on the new computer, start it and close it (don't let it search for music). 2) Copy all the files in the above folders from old PC to new PC. 3) Start iTunes and authorize the new computer (and deauthorize old one). 4) Before syncing, update all iphone apps to current versions on both my iphone and in itunes. 5) The Sync. The above steps always work for me, and basically Itunes on my new PC works exactly as it did on the old PC. My Question: In the hopes of bybassing the above steps in the future, I would like to just have Itunes use another internal Drive that I use for file storage (e.g. D:/) as the path for the above two directory? Then if I move to new PC again, I could just setup itunes to use the correct path. Is that possible yet with minimal implications? If so how?

  Read the article

• Unable to ssh in Beagle Bone Black

  - by SamuraiT

  I wanted to install pip onto beagle bone black,and I tried this: /usr/bin/ntpdate -b -s -u pool.ntp.org opkg update && opkg install python-pip python-setuptools then, it threw errors,but Unfortunately, I didn't log that errors. it was occurred a week ago and was't solved yet. I wanted to solve it now and I tried connect by ssh,but I failed. When I ping to beagle bone, it responds, and Cloud9 IDE is working too but not ssh. I don't think this is serious problem since I can connect to beagle bone by other methods: Cloud9 or so. However, to use python on beagle bone, I need to connect by ssh. Before trying to update and install python-pip, I could connect by ssh. Do you have any ideas to solve this connection problem? note I use default OS: Angstrom I don't use SD card. HOST PC is mac, OS.X 10.9 connect by USB serial I checked this but this wasn't helpful http://stackoverflow.com/questions/19233516/cannot-connect-to-beagle-bone-black I could connect by GateOne SSH client, but still unable to connect from terminal.

  Read the article

• No audio with streaming video

  - by Chris Barnhill

  I am having trouble with audio when playing streaming videos. My sound card is fine. I know this because if I play sounds from my local machine, there's no problem. It's only when I try to play sounds from the internet that I lose audio. This only started happening recently when I did 2 things: I connected a USB headphone/microphone set to record screencasts I began recording/publishing screencasts from screenr.com. I have tried playing video both with the headset connected and without it connected: it makes no difference. If I record a screencast on screenr.com and preview it, I hear the audio. But once I publish is and play it, there is no audio. I also hear no audio with YouTube videos. I really hope someone can help. Thanks. The latest is that the problem went away after I powered my system off and on. A reboot didn't do it, I had to actually shut down the power.

  Read the article

• "Dictionary problem." Error with VMPlayer

  - by George Mauer

  I'm pretty new to using vmware virtualization (been a virtualbox user) so I'm hoping you guys can help me out. I recently got an external usb disk containing a vm for a client, downloaded vmplayer, set it up with "Open a Virtual Machine", ran it, easy as pie. After working with it a bit this morning, I shut the VM down and now trying to start it back up again I get this: I tried removing the vm from my library, now it happens whenever I try to add it back in. In the meantime, I can still access other virtual machines so it seems like the problem might be with the virtual disk. So two questions: This is obviously not a very helpful error message. Where can I go to get more information? My Application EventLog doesn't contain anything from VMWare. What steps can I take to fix the problem? Edit: A couple more pieces of information. I did not take any snapshots. I don't think VM Player even has that ability. I have a zip file of (what I assume) is the state of the VM when it was sent to me. I cannot unzip it as it is huge and simply requires more HD space than I have available but I did extract the vmx file and examine it. Other than the UUIDs and the fact that mine reads cleanShutdown = "FALSE" they are identical. The log contains the following lines Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead: Unable to load dict from 'E:....\MachineName.vmsd'. Jun 23 10:11:18.080: vmx| SNAPSHOT: SnapshotConfigInfoRead failed for file 'E:....\MachineName.vmx': Dictionary problem (6) Jun 23 10:11:18.082: vmx| SNAPSHOT: Snapshot_TimeStampTiers failed: Dictionary problem (6)

  Read the article

• Postfix auto create Maildir

  - by Eugene

  I've been beating my head against a wall for a while now on this one. Basically, here is the rundown: Our MX record points to a frontend SMTP server, which contains aliases for actually routing the mail. No alias, no access to the backend storage server, which is what our clients connect to. I'm upgrading the backend email server. Currently, a user is created for every email user on the server, which creates the mailbox. On the new server, everything autheticates through PAM to an LDAP server (all of which is working properly). My goal is to get Postfix to create the Maildir directory for the user automatically. This works fine when I have the /home directory with 777 permissions, but for obvious reasons, this should be avoided. I would like to do this with 775 permissions on /home with a group owner of whatever user Postfix is running as, but I can't seem to figure out what user to use. With the 777 permissions, the /home/$user/Maildir directory is created on message delivery. Does anybody know how I can do this without 777 permissions? The system I am working on is a 64-bit Debian Lenny 5.07 install. Any advice would be appreciated.

  Read the article

• what type of laptop do I need to run a amd64 or i386 VM?

  - by Frank Schwieterman

  I was running an amd64 build of Ubuntu on a VM on a Windows host which was also amd64. Later I found I could not run the same amd64 iso on my laptop, which is intel without hyper-V. I was confused I thought chipset mattered, but maybe it does not. When buying a PC or Apple, is there anything to check about the chipset to make sure it can run different types of VMs? In my case, I was trying to run ubuntu on a Thinkpad T520. Per answer below, I did need to enable some bios settings. I'm still having some issues. Running ubuntu on virtual box, when I try to use ubuntu-12.10-server-amd64.iso for the CD/DVD device to start a new VM, virtualbox complains "Failed to open the CD/DVD image . Could not get the storage format of the medium (VERR_NOT_SUPPORTED). When I try to use ubuntu-12.10-server-i386.iso the ISO is accepted, but then the VM complains "FATAL: No bootable medium found! System halted." I had been using an amd64 iso on my home PC which is amd64 and it works fine, which is why I suspected CPU mismatch was the problem at first. But it seems like I'm having issues, and maybe this superuser thread can be used to verify the cpu is irrelevant in this case.

  Read the article

• How can I make a copy of a printer in Win7?

  - by hawbsl

  Has anyone been able to copy an existing printer in Win7? I know that we were able to do this in XP (not as a direct copy/paste, but by installing the printer twice) but in Win7 it doesn't seem to be possible. Googling the answer is hopeless because searching for "copy printer" or "duplicate printer" you get a bunch of posts about "printer copiers" or people complaining about duplicate printers getting created in the background (precisely what I'd like to be able to do) It'd be good to know how to do it in general, but if it depends on the printer type, then in our case we are trying to make a copy of an HP Laserjet. Tried installing from the CD - but the CD is too old for Win7 Tried installing via Add Printer and that seems to install the printer but it's marked with an error. Tried installing via the .exe installer from the HP site and that does result in a successful printer being installed, but it won't let you install the same printer twice (stalls on the "insert USB cable now" step - simply won't enable the greyed out "Next" button). The reason this is required is so that we can print to one to the feeder and to the tray separately.

  Read the article

• "Ethernet" doesn't have a valid IP configuration

  - by Xuzuno

  I'm using an ethernet cord to connect to my internet and it has been working well until Thursday morning when I turned on my laptop (Windows 8) to see a yellow triangle sign in the bottom right hand corner, in front of the ethernet connected symbol. Since then I haven't been able been able to access the internet from my computer. When I hover over it, it says that it is an "Unidentified network" and there is "No internet access". I've run the Windows 8 troubleshooting and it says that the problem found was ""Ethernet" doesn't have a valid IP configuration", but I'm unsure how to fix it. I'm thinking that the problem is to do with my computer rather than my network, because I've tried another laptop (Windows 7) through the same ethernet cable and connection and the internet works fine on the other laptop. I've tried so many fixes that I've found online, with none of them actually working. Yesterday I even tried a full system reset, where I re-installed Windows 8, re-partitioned and wiped everything off the hard drive, but it still appears have the exact same problem. Today I also purchased and tried a new ethernet cable which didn't work, so I then purchased a USB to Ethernet adapter, to make sure that it wasn't my ethernet port on my laptop that was faulty. That didn't work either, and the same problem still remains. I feel like I've tried everything, so can someone please help me?

  Read the article

• Long 'pause' after copying large files on windows 2008

  - by Ian

  I have a mystery regarding pauses after file copies on windows server 2088 (and other releases) When copying large files, like vhds, to locally attached USB disks I often see a long pause after the copy has completed 100%. As an example: robocopying vhd files. The bytes read/written count matches the vhd file size and robocopy shows 100% but it pauses for several minutes. If I do nothing it will continue, but I will have to wait for quite some time - about the same amount of time as it took to get to 100%. The bytes read/bytes written counters for robocopy do not change. My first thought was that the AV had to scan it, but I'm looking at a machine right now which doesn't have an AV installed and this is occurring, so impossible. No other processes are showing read/write byte counts as going up. The behavior is the same if I use the copy command or xcopy. I've seen this on other systems but have never worked out what the cause is. Anyone got any suggestions as to what might be going on?

  Read the article

• Disable internal display on Macbook Pro without closed lid mode?

  - by jslaker

  I have an early 2007 Macbook Pro running 10.5 that I've recently set up on a KVM with my primary desktop system. The problem I've run into is that I have a 20" 1680x1050 LCD, and OS X only provides options to mirror at the resolution of the built-in display or to span. Since the built-in display runs at 1440x900, this leads to running my LCD at non-native res and a fuzzy picture. There isn't any option that I can find to simply disable the built-in display entirely and run the external LCD at its native resolution. I am aware of closed lid mode, but the MBP was disassembled while in storage for about 6 months (took it apart to pull the HDD) and the cable to the touchpad, which controls the sleep sensor was damaged, meaning closed lid mode won't work. I've looked into replacing the cable, but the cheapest I've been able to find it is $75-100, and I'm trying not to invest any more money into this computer as it also has a completely dead battery and a few other minor problems. I've found the app SwitchResX which appears to allow you to do what I need, but it has a lot of functionality I don't need and a ~$20 registration charge attached to it. An odd set of circumstances, I'm aware, but I was hoping somebody might know of an OS hack that would let me just disable the internal display and be done with it. :)

  Read the article

• Computer won't start up. Stuck on Lenovo splash screen. Help Diagnose

  - by Ace Legend

  I have some (I'm not sure exactly what model) Lenovo 21" IdeaCentre. Honestly, the computer works off and on. I have had problems with it not being able to shutdown, which I fixed. The fan seems to be constantly running, a few other problems as well. Anyway, nobody was using it when all of a sudden it switched to a blue screen. I was in the kitchen, but when I got over to the computer I read the message. It said something about bad drivers, but that is all I saw and then it restarted. However, when it got to the Lenovo Splash screen, nothing happened. I waited there for over 10 minutes, but still nothing. I tried to turn of the computer, but the only way to do it was to pull out the power cable. I then removed all USB devices and tried again. Still nothing. It also won't respond to keyboard input when I try to use enter to interrupt normal startup. My guess is some piece of hardware is damaged inside the machine. However, I have no idea what piece it is. Does anybody have any idea what could be wrong with it? Thanks.

  Read the article

• Software raid 0 with six disks performance

  - by user134880

  I have some problems with disk performance. I have 6 x WD 500Gb RE4 disks. Each disk gives 135Mb/sec throughput. All measurements are made with hdparm with options "-tT" (I know that it is just synthetic test, but I need some start point to make measurements). I have controller with Sil3124 x 4 ports PCI Express 1x So... RAID0 on controller with 2 disks gives 200Mb/s - ok, pcie limit. RAID0 on motherboard with 2 disks gives 270Mb/s - niceeee :) RAID0 on contorller with 4 disks gives 200Mb/s - ok, pcie limit. RAID0 on controller with 4 disks + 1 disks on motherboard = 340Mb/s ... :( RAID0 on controller with 4 disks + 2 disks on motherboard = 300Mb/s .... why? Any ideas? Maybe need more cpu power? Now there is Pentium D Dual core 2.8Ghz, 4Gb RAM. It is dedicated box for storage.. no other activity.

  Read the article

• External Dell Display doesn't work with MacBook Pro (2011) after Thunderbolt Firmware Update (1.0 and 1.2)

  - by tom

  Today two Thunderbolt Firmware Updates (1.0 and 1.2) became available for my MacBook Pro (Early 2011). After installing both, my external monitor, a Dell U2713HM, does no longer work. The system detects the display, but the display shows only black. An Apple Thunderbolt display works fine and a MacBook Air can use the Dell monitor without problems. My MacBook Pro can use the Dell monitor just fine when I boot from a USB stick. Therefore, clearly the Thunderbolt Firmware Update seems to be the problem. Does anyone have the same problem? Any solutions or workarounds? I guess there is no way to remove a Thunderbolt Firmware Update once it's installed, right? Update 24.10.2013: Is there no one else with this problem? In the meantime I tried three different cables – none worked. My colleague with the same generation MacBook Pro also can't use my display after installing the firmware update. All colleagues with MacBook Airs and newer MacBook Pros (all didn't receive the firmware update) can use the display. Update 29.10.2013: Wow, ok today my new MacBook Pro Retina 13' (Late 2013) arrived. Guess what, I cannot use the display with it. Only HDMI works – not with the full resolution.

  Read the article

• Half of installed RAM is hardware reserved

  - by user968270

  After a rather arduous and convoluted series of problems that left me without a desktop for ~80 days, I've finally got the thing up and running, having replaced the power supply, motherboard, graphics card and CPU. Now, however, I'm experiencing the 'hardware reserved RAM' issue. Perhaps this is the exhaustion talking, but looking at the question that tends to get pointed to when this kind of topic gets locked as a duplicate hasn't helped. I have 16 GB of RAM installed in an MSi 970A-G46, which is spec'd for up to 32 GB of RAM. The BIOS recognizes that I have 16 GB installed, and the resource monitor also shows the whole 16 GB, only it shows 8 GB as hardware reserved. I've seen suggestions that it's an OS issue, but the particular installation of Windows 7 (64-bit) which I'm running on my boot drive is the same as the one that could actually access the 16 GB in my previous motherboard (MSi 870A-G54). I've updated my BIOS using the MSi Live Update tool and restarted the machine with no effect, and I cannot seem to locate any 'Memory Remapping' option as I've seen mentioned. I've physically swapped the RAM between the slots to no effect. I've unchecked the Maximum Memory box in the msconfig Boot tab's advanced options, also to no effect. These are my system's basic specifications OS: Windows 7 Home Premium (64-Bit) Motherboard: MSi 970A-G46 CPU: AMD FX-8150 Graphics Card: XFX Radeon HD 6870 Boot Drive: OCZ Agility 3 Storage Drive: Samsung Spinpoint F3 ST1000DM005/HD103SJ 1TB PSU: Thermaltake TR-2 TR600 600W ATX12V v2.3

  Read the article

• What hardware would I need (approx) to run ESXi server?

  - by mr.b

  Hi, I am considering to purchase off-the-shelf commodity hardware in order to build server that will host virtual machines using ESXi server. Intended purpose for this server is NOT mission critical tasks. It will have to run perhaps 20-50 Windows XP/Vista/7 virtual machines (in total, but closer to 20 figure). Each guest would have to have 1-2 GB of ram, and probably two-three times more disk space than guest OS needs with clean install and all updates applied (that would be around 6-8 GB for XP, and i believe closer to 10-15 for win7). Those guests will act as a test ground for a new product that is network management software, thus guests will idle most of their time once initially loaded, but if I give them some task to complete, they should be able to perform reasonably well. Now, from what I have learned... CPU is usually not much of an issue (6 cores would do it), memory should not be lacking, but doesn't have to be sum of all guests, because of overcommitment... That leads me to IO, which is, as it seems, the bottleneck. Since I have very little experience with ESXi (and ESX, too) server, I'd like to ask: How much memory could I save by overcommitment, and how does it affect performance? Is 6-core cpu enough to run above described system? Would it be possible to run entire server off two (or even one) SSD drives (to host system virtual disks, with few additional HDDs (2-3) in RAID 0 to be used as secondary storage? I read somewhere that ESXi allows having something like "master image", essentially virtual machine that is "deployed" many times, so that disk space can be saved by having only differences stored by specific guests, instead of copying around whole virtual disks. Is this true, and how can this help me? Are there any other things I need to take into consideration when building this off-the-shelf solution? I should probably mention here that I'm fully aware of issues like SPOF regarding power supply, raid 0, etc, but since it's only a testing ground and not a production system, it's not so important for me. Thanks, B.

  Read the article

• Ubuntu+Win7--disk error press any key to restart

  - by Siddharth

  Apparently,none of the solutions in any other posts and forums worked for me For some reasons I decided to remove ubuntu from my hard disk drive. My partition table(presently): (/dev/sda1) (fat32) 900 MiB ---(MBR,I suppose) (/dev/sda2) (ntfs) 70 GiB -----(Windows 7) (/dev/sda3) (ntfs) 314.88 GiB --(Personal File storage) (/dev/sda4) (ext4) 80 GiB -----(Ubuntu 13.04) (unallocated) -----1.31 MiB So,after moving(cut-paste) everything(for backup) from the fat32 partition using win7..I booted into Ubuntu and copied the remaining 3 files(hidden in Win7 file explorer) --bootmgr,bootsect.bak,and one more which I do not remember.TERRIBLE MISTAKE After this I again booted into Windows and deleted ext4 partition..formatted it to ntfs..and shut down the pc.Then,I put in a Win7 bootable USB..using command prompt I entered bootrec /fixmbr,and bootrec /fixboot.. Restarting showed me the GRUB..choosing windows 7 showed me "Disk Error. Press any key to restart." I also installed a fresh Win7 installation on the 80 GiB partition expecting a Windows Legacy Bootloader with two win7 options..but did not work. Then..I used a Ubuntu LiveUSB to put it back to the present configuration(above) since all methods to restore the MBR failed.. I copied back the fat32 partitions backup files but couldn't copy those 3 files.Somehow ,they had been recreated and were non-replaceable. I do not want to format the win7 partition for a fresh one. I have used boot-repair..Restore MBR option brings back to "Disk error...." without even going through grub..so I reinstalled grub and I'm able to boot into Ubuntu. grub menu shows the win7 option as "Windows 7 (loader) (on /dev/sda1)". paste.ubuntu.com/5753710 paste.ubuntu.com/5775999

  Read the article

• HP/IBM alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/IBM? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• What diagnostics are safe to run on an SSD drive?

  - by Peter Mounce

  I have a MacBook Pro (late 2010) with a Crucial RealSSD 256Gb in it; 60Gb is given to the Windows 7 x64 BootCamp partition. I have a USB-attached 500Gb drive for (most) data. In the last day or so, I've had a BSOD and several OS freezes (both Mac OSX 10.6.6 and Win7). The system in both cases will boot fine (at the moment!) and then run things fine, then some time later a program will stop responding, followed shortly thereafter by the system as a whole, forcing a reboot. This smacks to me of a storage problem. Given that I have an SSD and not a regular magnetic HDD, what are my next steps, in both OS'? I haven't seen anything pertinent in Windows' event-log. I'm not sure of the equivalent place to look in OSX; it's never given me issue to find out. What are my options for attempting to save my data from the SSD to another drive, given that after some small amount of time (eg half an hour), the OS stops responding? What are the recommended next steps?

  Read the article

• Windows Server 2012 Can't Print

  - by Chris

  I know this may sound incredibly stupid and there is probably an easy solution but I can't seem to find it. Friends of mine recently upgraded their server for their small business from the POS old one. New hardware and a change from Windows Server 2003 to Windows Server 2012. I've got everything they need transfered over and running except for printing. They need to be able to print to printers in the vans their technicians use from the server via remote desktop. In other words the use a laptop to remote desktop into the server and need to print invoices out from the remote server to printers attached locally via usb. On the old server they just installed the identical driver and that was it, they could print as needed. On this server no matter what we seem to do we can't get it to print remotely, and in the process we also discovered that the server can't even print to the network printer. It sees the printer on it's network and it sees (through redirect) the printers in the vans but when you hit print it claims it did and nothing happens. There isn't an issue with the printers themselves as every other device we have can print to them without issues. Is there some setting that is inhibiting the server from printing? Is there something I need to install (print server?) to add the functionality? Thanks in advance for helping me out here

  Read the article

• How to optimize a postgreSQL server for a "write once, read many"-type infrastructure ?

  - by mhu

  Greetings, I am working on a piece of software that logs entries (and related tagging) in a PostgreSQL database for storage and retrieval. We never update any data once it has been inserted; we might remove it when the entry gets too old, but this is done at most once a day. Stored entries can be retrieved by users. The insertion of new entries can happen rather fast and regularly, thus the database will commonly hold several millions elements. The tables used are pretty simple : one table for ids, raw content and insertion date; and one table storing tags and their values associated to an id. User search mostly concern tags values, so SELECTs usually consist of JOIN queries on ids on the two tables. To sum it up : 2 tables Lots of INSERT no UPDATE some DELETE, once a day at most some user-generated SELECT with JOIN huge data set What would an optimal server configuration (software and hardware, I assume for example that RAID10 could help) be for my PostgreSQL server, given these requirements ? By optimal, I mean one that allows SELECT queries taking a reasonably little amount of time. I can provide more information about the current setup (like tables, indexes ...) if needed.

  Read the article

• Magical moving desktop icons

  - by Nathan Taylor

  I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

  Read the article

< Previous Page | 391 392 393 394 395 396 397 398 399 400 401 402  | Next Page >