Search Results

Search found 12912 results on 517 pages for 'auto suggest'.

Page 397/517 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

• SQL SERVER – BACKUPIO, BACKUPBUFFER – Wait Type – Day 14 of 28

  - by pinaldave

  Backup is the most important task for any database admin. Your data is at risk if you are not performing database backup. Honestly, I have seen many DBAs who know how to take backups but do not know how to restore it. (Sigh!) In this blog post we are going to discuss about one of my real experiences with one of my clients – BACKUPIO. When I started to deal with it, I really had no idea how to fix the issue. However, after fixing it at two places, I think I know why this is happening but at the same time, I am not sure the fix is the best solution. The reality is that the fix is not a solution but a workaround (which is not optimal, but get your things done). From Book On-Line: BACKUPIO Occurs when a backup task is waiting for data, or is waiting for a buffer in which to store data. This type is not typical, except when a task is waiting for a tape mount. BACKUPBUFFER Occurs when a backup task is waiting for data, or is waiting for a buffer in which to store data. This type is not typical, except when a task is waiting for a tape mount. BACKUPIO and BACKUPBUFFER Explanation: This wait stats will occur when you are taking the backup on the tape or any other extremely slow backup system. Reducing BACKUPIO and BACKUPBUFFER wait: In my recent consultancy, backup on tape was very slow probably because the tape system was very old. During the time when I explained this wait type reason in the consultancy, the owners immediately decided to replace the tape drive with an alternate system. They had a small SAN enclosure not being used on side, which they decided to re-purpose. After a week, I had received an email from their DBA, saying that the wait stats have reduced drastically. At another location, my client was using a third party tool (please don’t ask me the name of the tool) to take backup. This tool was compressing the backup along with taking backup. I have had a very good experience with this tool almost all the time except this one sparse experience. When I tried to take backup using the native SQL Server compressed backup, there was a very small value on this wait type and the backup was much faster. However, when I attempted with the third party backup tool, this value was very high again and was taking much more time. The third party tool had many other features but the client was not using these features. We end up using the native SQL Server Compressed backup and it worked very well. If I get to see this higher in my future consultancy, I will try to understand this wait type much more in detail and so probably I would able to come to some solid solution. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

  Read the article

• SQL SERVER – Partition Parallelism Support in expressor 3.6

  - by pinaldave

  I am very excited to learn that there is a new version of expressor’s data integration platform coming out in March of this year.  It will be version 3.6, and I look forward to using it and telling everyone about it.  Let me describe a little bit more about what will be so great in expressor 3.6: Greatly enhanced user interface Parallel Processing Bulk Artifact Upgrading The User Interface First let me cover the most obvious enhancements. The expressor Studio user interface (UI) has had some significant work done. Kudos to the expressor Engineering team; the entire UI is a visual masterpiece that is very responsive and intuitive. The improvements are more than just eye candy; they provide significant productivity gains when developing expressor Dataflows. Operator shape icons now include a description that identifies the function of each operator, instead of having to guess at the function by the icon. Operator shapes and highlighting depict the current function and status: Disabled, enabled, complete, incomplete, and error. Each status displays an appropriate message in the message panel with correction suggestions. Floating or docking property panels provide descriptive tool tips for each property as well as auto resize when adjusting the canvas, without having to search Help or the need to scroll around to get access to the property. Progress and status indicators let you know when an operation is working. “No limit” canvas with snap-to-grid allows automatic sizing and accurate positioning when you have numerous operators in the Dataflow. The inline tool bar offers quick access to pan, zoom, fit and overview functions. Selecting multiple artifacts with a right click context allows you to easily manage your workspace more efficiently. Partitioning and Parallel Processing Partitioning allows each operator to process multiple subsets of records in parallel as opposed to processing all records that flow through that operator in a single sequential set. This capability allows the user to configure the expressor Dataflow to run in a way that most efficiently utilizes the resources of the hardware where the Dataflow is running. Partitions can exist in most individual operators. Using partitions increases the speed of an expressor data integration application, therefore improving performance and load times. With the expressor 3.6 Enterprise Edition, expressor simplifies enabling parallel processing by adding intuitive partition settings that are easy to configure. Bulk Artifact Upgrading Bulk Artifact Upgrading sounds a bit intimidating, but it actually is not and it is a welcome addition to expressor Studio. In past releases, users were prompted to confirm that they wanted to upgrade their individual artifacts only when opened. This was a cumbersome and repetitive process. Now with bulk artifact upgrading, a user can easily select what artifact or group of artifacts to upgrade all at once. As you can see, there are many new features and upgrade options that will prove to make expressor Studio quicker and more efficient.  I hope I’m not the only one who is excited about all these new upgrades, and that I you try expressor and share your experience with me. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Windows Phone 7 Series - Tools and Resources

  - by TechTwaddle

  Unless you've been living in the caves of Lascaux for the past couple of days, you probably know what's happening in the world of Windows Phone. Microsoft unveiled the developer tools required to develop applications and games for Windows Phone 7 at MIX10 a couple of days back. Silverlight and XNA being the major frameworks, no big surprise there. And the best news of all is that all the development tools are free! So if you are planning to develop apps for Windows Phone 7, read on. The first place, or more appropriately hub, for you is the Windows Phone Developer Portal. It has most of the information you need to get you started. Now there is a ton of information available at other places too. In this post, I take time to put all the information that I found useful at one place, and I'll keep updating this as and when I find new stuff.   Setting up the development environment 1. Install Windows Phone Developer Tools CTP (Community Technology Preview) This will install Visual Studio 2010 Express, Silverlight, XNA framework and emulator for Windows Phone 7. It also installs a few support tools. 2. Expression Blend 4 for Windows Phone:     - Install Expression Blend 4 beta     - Install Expression Blend Add-in Preview for Windows Phone     - Install Expression Blend SDK Preview for Windows Phone Installing the above tools should set your machine up for development. I installed the tools on my Windows Vista SP1 machine and the process went smoothly without running into any major hitch. Note that the tools won't install on Windows XP, read the release notes of the CTP. Resources and Documentation 1. Microsoft Windows Phone 7 Series Developer Training Kit 2. Programming Windows Phone 7 Series by Charles Petzold. Contains few chapters only. Gives a good preview. 3. MSDN documentation for Windows Phone 7 Development 4. A sample chapter from Learning Windows Phone Programming [PDF] by Yochay Kiriaty and Jaime Rodriguez. Complete book will be available at a later time. 5. Windows Phone 7 Developer Forum - where you can ask questions and problems you run into and the experts are there to help you. 6. For Silverlight visit silverlight.net and for XNA game development, the XNA Creators Club is the place to go, also make sure you follow Michael Klutcher's and Shawn Hargreaves' blog. 7. And finally the MIX'10 website. Most of the sessions will be available for download later (some are already available). Click on the Windows Phone tag to get all the session details and downloads.   If you are completely new to Silverlight and XNA (like me), and C# makes some sense to you then I suggest you go through the Developer Training Kit. It gives a good start and ramps you up pretty quickly.

  Read the article

• Automated SSRS deployment with the RS utility

  - by Stacy Vicknair

  If you’re familiar with SSRS and development you are probably aware of the SSRS web services. The RS utility is a tool that comes with SSRS that allows for scripts to be executed against against the SSRS web service without needing to create an application to consume the service. One of the better benefits of using this format rather than writing an application is that the script can be modified by others who might be involved in the creation and addition of scripts or management of the SSRS environment.   Reporting Services Scripter Jasper Smith from http://www.sqldbatips.com created Reporting Services Scripter to assist with the created of a batch process to deploy an entire SSRS environment. The helper scripts below were created through the modification of his generated scripts. Why not just use this tool? You certainly can. For me, the volume of scripts generated seems less maintainable than just using some common methods extracted from these scripts and creating a deployment in a single script file. I would, however, recommend this as a product if you do not think that your environment will change drastically or if you do not need to deploy with a higher level of control over the deployment. If you just need to replicate, this tool works great. Executing with RS.exe Executing a script against rs.exe is fairly simple. The Script Half the battle is having a starting point. For the scripting I needed to do the below is the starter script. A few notes: This script assumes integrated security. This script assumes your reports have one data source each. Both of the above are just what made sense for my scenario and are definitely modifiable to accommodate your needs. If you are unsure how to change the scripts to your needs, I recommend Reporting Services Scripter to help you understand how the differences. The script has three main methods: CreateFolder, CreateDataSource and CreateReport. Scripting the server deployment is just a process of recreating all of the elements that you need through calls to these methods. If there are additional elements that you need to deploy that aren’t covered by these methods, again I suggest using Reporting Services Scripter to get the code you would need, convert it to a repeatable method and add it to this script! Public Sub Main() CreateFolder("/", "Data Sources") CreateFolder("/", "My Reports") CreateDataSource("/Data Sources", "myDataSource", _ "Data Source=server\instance;Initial Catalog=myDatabase") CreateReport("/My Reports", _ "MyReport", _ "C:\myreport.rdl", _ True, _ "/Data Sources", _ "myDataSource") End Sub   Public Sub CreateFolder(parent As String, name As String) Dim fullpath As String = GetFullPath(parent, name) Try RS.CreateFolder(name, parent, GetCommonProperties()) Console.WriteLine("Folder created: {0}", name) Catch e As SoapException If e.Detail.Item("ErrorCode").InnerText = "rsItemAlreadyExists" Then Console.WriteLine("Folder {0} already exists and cannot be overwritten", fullpath) Else Console.WriteLine("Error : " + e.Detail.Item("ErrorCode").InnerText + " (" + e.Detail.Item("Message").InnerText + ")") End If End Try End Sub   Public Sub CreateDataSource(parent As String, name As String, connectionString As String) Try RS.CreateDataSource(name, parent,False, GetDataSourceDefinition(connectionString), GetCommonProperties()) Console.WriteLine("DataSource {0} created successfully", name) Catch e As SoapException Console.WriteLine("Error : " + e.Detail.Item("ErrorCode").InnerText + " (" + e.Detail.Item("Message").InnerText + ")") End Try End Sub   Public Sub CreateReport(parent As String, name As String, location As String, overwrite As Boolean, dataSourcePath As String, dataSourceName As String) Dim reportContents As Byte() = Nothing Dim warnings As Warning() = Nothing Dim fullpath As String = GetFullPath(parent, name)   'Read RDL definition from disk Try Dim stream As FileStream = File.OpenRead(location) reportContents = New [Byte](stream.Length-1) {} stream.Read(reportContents, 0, CInt(stream.Length)) stream.Close()   warnings = RS.CreateReport(name, parent, overwrite, reportContents, GetCommonProperties())   If Not (warnings Is Nothing) Then Dim warning As Warning For Each warning In warnings Console.WriteLine(Warning.Message) Next warning Else Console.WriteLine("Report: {0} published successfully with no warnings", name) End If   'Set report DataSource references Dim dataSources(0) As DataSource   Dim dsr0 As New DataSourceReference dsr0.Reference = dataSourcePath Dim ds0 As New DataSource ds0.Item = CType(dsr0, DataSourceDefinitionOrReference) ds0.Name=dataSourceName dataSources(0) = ds0     RS.SetItemDataSources(fullpath, dataSources)   Console.Writeline("Report DataSources set successfully")       Catch e As IOException Console.WriteLine(e.Message) Catch e As SoapException Console.WriteLine("Error : " + e.Detail.Item("ErrorCode").InnerText + " (" + e.Detail.Item("Message").InnerText + ")") End Try End Sub     Public Function GetCommonProperties() As [Property]() 'Common CatalogItem properties Dim descprop As New [Property] descprop.Name = "Description" descprop.Value = "" Dim hiddenprop As New [Property] hiddenprop.Name = "Hidden" hiddenprop.Value = "False"   Dim props(1) As [Property] props(0) = descprop props(1) = hiddenprop Return props End Function   Public Function GetDataSourceDefinition(connectionString as String) Dim definition As New DataSourceDefinition definition.CredentialRetrieval = CredentialRetrievalEnum.Integrated definition.ConnectString = connectionString definition.Enabled = True definition.EnabledSpecified = True definition.Extension = "SQL" definition.ImpersonateUser = False definition.ImpersonateUserSpecified = True definition.Prompt = "Enter a user name and password to access the data source:" definition.WindowsCredentials = False definition.OriginalConnectStringExpressionBased = False definition.UseOriginalConnectString = False Return definition End Function   Private Function GetFullPath(parent As String, name As String) As String If parent = "/" Then Return parent + name Else Return parent + "/" + name End If End Function

  Read the article

• Strange Happenings

  - by MOSSLover

  There are weeks we go about our life thinking nothing is going to change nothing will happen.  Then there are other weeks a billion things happen at once.  Friday started off very weird for me.  I flew into Atlanta and I met some cool people for another SharePoint event.  I had some good conversations.  Saturday then hit me and my virtual machine bombed in my presentation after the auto updater ran.  I was writing code on the board and describing everything in notepad.  I would say as presentations go it was the best and the worst presentation all wrapped into one.  The next day I was in Baltimore and I hung out with my aunt which was relatively uneventful and great.  Then Monday hit and half my presentations failed or succeeded and my screen freezes so I start describing the code.  I was on top of my game until Monday night.  On top of the world.  I'm exhausted I get into Raleigh and one of the craziest stories of my life happens.  So my boss has been renting cars through Priceline this week I got a different company than the other weeks. The company gives me a Ford Focus and I plug in the coordinates on my IPhone where I want go.  I head out and then I get to the destination hotel (or I thought I did). I go inside it's the wrong hotel the other one is a few miles away.  I walk outside hop into the car and it sounds like a gunshot.  Nothing is starting...Am I doing something wrong?  No I'm not the car is completely dead in the water.  I call the rental car facility and they tell me to call roadside they are closing for the night.  Roadside says they can't give me a new car but they can get me a jump then I have to take it up with the facility.  They send me a tow truck to give me a jump the guy can't jump the car.  He tells me this vehicle was towed about an hour ago.  He shows me a copy of a slip from when he towed it.  We also notice the rental car company left one of there price scanning guns in the vehicle.  I call up roadside and now they are interested in getting me a car because I need to be onsite tomorrow.  They get the manager of the facility on the phone he apologizes profusely and he says he'll be there in 10 minutes.  About 30 minutes pass and him plus another dude show up with a Ford Escape leather interior.  At this point I hand him the gun tell him someone left it in the vehicle and that I'm not so happy with them.  I ask them to comp my rental they can't due to Priceline, however if I call him again this week he can get me a voucher.  It's about 2 am and I'm ready to get to the hotel I don't make it in the next morning until 10 am.  I would say this was a crazy week all forms of technology are trying to tell me something.  What I have no idea, but we'll see the outcome soon.  I feel so weird tons of change is about to happen.  I don't know if it's good or bad.  I think this week is some form of omen.

  Read the article

• javascript complex recurrsion [on hold]

  - by Achilles

  Given Below is my data in data array. What i am doing in code below is that from that given data i have to construct json in a special format which i also gave below. //code start here var hierarchy={}; hierarchy.name="Hierarchy"; hierarchy.children=[{"name":"","children":[{"name":"","children":[]}]}]; var countryindex; var flagExist=false; var data = [ {country :"America", city:"Kansas", employe:'Jacob'}, {country :"Pakistan", city:"Lahore", employe:'tahir'}, {country :"Pakistan", city:"Islamabad", employe:'fakhar'} , {country :"Pakistan", city:"Lahore", employe:'bilal'}, {country :"India", city:"d", employe:'ali'} , {country :"Pakistan", city:"Karachi", employe:'eden'}, {country :"America", city:"Kansas", employe:'Jeen'} , {country :"India", city:"Banglore", employe:'PP'} , {country :"India", city:"Banglore", employe:'JJ'} , ]; for(var i=0;i<data.length;i++) { for(var j=0;j<hierarchy.children.length;j++) { //for checking country match if(hierarchy.children[j].name==data[i].country) { countryindex=j; flagExist=true; break; } } if(flagExist)//country match now no need to add new country just add city in it { var cityindex; var cityflag=false; //hierarchy.children[countryindex].children.push({"name":data[i].city,"children":[]}) //if(hierarchy.children[index].children!=undefined) for(var k=0;k< hierarchy.children[countryindex].children.length;k++) { //for checking city match if(hierarchy.children[countryindex].children[k].name==data[i].city) { // hierarchy.children[countryindex].children[k].children.push({"name":data[i].employe}) cityflag=true; cityindex=k; break; } } if(cityflag)//city match now add just empolye at that city index { hierarchy.children[countryindex].children[cityindex].children.push({"name":data[i].employe}); cityflag=false; } else//no city match so add new with employe also as this is new city so its emplye will be 1st { hierarchy.children[countryindex].children.push({"name":data[i].city,children:[{"name":data[i].employe}]}); //same as above //hierarchy.children[countryindex].children[length-1].children.push({"name":data[i].employe}); } flagExist=false; } else{ //no country match adding new country //with city also as this is new city of new country console.log("sparta"); hierarchy.children.push({"name":data[i].country,"children":[{"name":data[i].city,"children":[{"name":data[i].employe}]}]}); // hierarchy.children.children.push({"name":data[i].city,"children":[]}); } //console.log(hierarchy); } hierarchy.children.shift(); var j=JSON.stringify(hierarchy); //code ends here //here is the json which i seccessfully formed from the code { "name":"Hierarchy", "children":[ { "name":"America", "children":[ { "name":"Kansas", "children":[{"name":"Jacob"},{"name":"Jeen"}]}]}, { "name":"Pakistan", "children":[ { "name":"Lahore", "children": [ {"name":"tahir"},{"name":"bilal"}]}, { "name":"Islamabad", "children":[{"name":"fakhar"}]}, { "name":"Karachi", "children":[{"name":"eden"}]}]}, { "name":"India", "children": [ { "name":"d", "children": [ {"name":"ali"}]}, { "name":"Banglore", "children":[{"name":"PP"},{"name":"JJ"}]}]}]} Now the orignal problem is that currently i am solving this problem for data of array of three keys and i have to go for 3 nested loops now i want to optimize this solution so that if data array of object has more than 3 key say 5 {country :"America", state:"NewYork",city:"newYOrk",street:"elm", employe:'Jacob'}, or more than my solution will not work and i cannot decide before how many keys will come so i thought recursion may suit best here. But i am horrible in writing recurrsion and the case is also complex. Can some awesome programmer help me writing recurrsion or suggest some other solution.

  Read the article

• 5.1 surround sound on Acer Aspire 5738ZG with Ubuntu 11.10

  - by kbargais_LV

  I got a problem with sound. I tried everything but no results. :( I got 3 sound ports. my daemon: # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0

  Read the article

• SQL SERVER – A Puzzle Part 4 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value

  - by pinaldave

  It seems like every weekend I get a new puzzle in my mind. Before continuing I suggest you read my previous posts here where I have shared earlier puzzles. A Puzzle – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value  A Puzzle Part 2 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value A Puzzle Part 3 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value After reading above three posts, I am very confident that you all will be ready for the next set of puzzles now. First execute the script which I have written here. Now guess what will be the next value as requested in the query. USE TempDB GO -- Create sequence CREATE SEQUENCE dbo.SequenceID AS DECIMAL(3,0) START WITH 1 INCREMENT BY -1 MINVALUE 1 MAXVALUE 3 CYCLE NO CACHE; GO SELECT next value FOR dbo.SequenceID; -- Guess the number SELECT next value FOR dbo.SequenceID; -- Clean up DROP SEQUENCE dbo.SequenceID; GO Please note that Starting value is 1, Increment value is the negative value of -1 and Minimum value is 3. Now let us first assume how this will work out. In our example of the sequence starting value is equal to 1 and decrement value is -1, this means the value should decrement from 1 to 0. However, the minimum value is 1. This means the value cannot further decrement at all. What will happen here? The natural assumption is that it should throw an error. How many of you are assuming about query will throw an ERROR? Well, you are WRONG! Do not blame yourself, it is my fault as I have told you only half of the story. Now if you have voted for error, let us continue running above code in SQL Server Management Studio. The above script will give the following output: Isn’t it interesting that instead of error out it is giving us result value 3. To understand the answer about the same, carefully observe the original syntax of creating SEQUENCE – there is a keyword CYCLE. This keyword cycles the values between the minimum and maximum value and when one of the range is exhausted it cycles the values from the other end of the cycle. As we have negative incremental value when query reaches to the minimum value or lower end it will cycle it from the maximum value. Here the maximum value is 3 so the next logical value is 3. If your business requirement is such that if sequence reaches the maximum or minimum value, it should throw an error, you should not use the keyword cycle, and it will behave as discussed. I hope, you are enjoying the puzzles as much as I am enjoying it. If you have any interesting puzzle to share, please do share with me and I will share this on blog with due credit to you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Conference networking for the socially awkward

  - by Melanie Townsend

  Do you approach a room full of strangers with excitement at all the new people you’re going to chat to over coffee and a muffin as you swap tales of how you convinced your manager to give you the day “off”? Or, do you find rooms full of strangers intimidating and begin by scouting out a place you can stand quietly and not be in someone’s way until the next session begins? If you’re on the train to extrovert city, that’s great, well done, move along. If, on the other hand, a room full of strangers who all seem to inexplicably know each other already is more challenge than opportunity, then making those connections with other professionals can be more difficult. So, here’s some advice, some gleaned from other things I’ve read online when trying to overcome my own discomfort in large groups (hopefully minus the infuriating condescension), others are just things I’ve found helpful over the years. Start small Smaller groups are less intimidating, and, now that you’ve taken the plunge to show up, it’s harder to remain inconspicuous. I find it’s easier to speak to new people once the option NOT to has been taken away. You’re there now, smile through the awkward and you’ll be forever grateful when the three people you’ve met and gotten to know here are also at that gigantic conference later on (ideally, introducing you to other people). Smile, or at the very least, stop scowling You probably don’t even know you’re doing it. If your resting face doesn’t come across as manically happy, tinge that with some social anxiety and you become one great ball of unapproachable. Normally, I wouldn’t suggest this as a problem that needs fixing, I have personally honed this face to use while travelling alone all the time. However, if you are indeed hoping to meet some useful people and get the most out of this conference, you may need to remind yourself to smile. Prepare some ice breakers This is going to sound stupid, like “no one does this right?” stupid, but, just, trust me a minute. It’s okay to prepare. You don’t need to write word-for-word questions to ask people and practice them in a mirror – that would be strange. I’m suggesting to just have an arsenal of questions to ask people if you get stuck, what session has been your favorite, which ones are you most looking forward to, have you heard X presenter speak before, what did you think of them? Even just thinking about these things in advance can help, and, as a bonus, while the other person is answering it gives you a moment to tamp down that panic, I mean breathe, I mean get to know them. You’re not alone (in the least creepy way possible) See that person in the corner clutching their phone with a mild deer in the headlights look?  That is potentially your new conference buddy. Starting with something along the lines of: I don’t know about you, the sessions here are great but I find the crowds a little tough to deal with. Mind if I park here for a second? is a decent opener. Just walking around and looking at exhibitors (if applicable) is fine, but it’s a little too easy to wander about and not actually speak to anyone if that’s all you’re doing. If joining a group of people talking is too much to start with, one-on-one can be easier. Have goals Are there people in particular you wanted to speak to? Did you have a personal goal of speaking to at least “x” new people? Are you trying to get a contact in a specific company because you want to work with them on something? Does the business have vague goals as well that you may or may not be judged on later? Making specific goals you can accomplish lets you know whether you’ve actually succeeded in your “networking pursuits” or what you need to work on more for next time. Everyone’s got their own coping technique. Some people are able to remind themselves that “humans are fundamentally social creatures” and somehow that helps them, others drink which is not really something I recommend for professional conferences but to each their own, and some focus on the fact that networking can play a big role in their career path. Just do what works for you, and if there’re any tricks you’ve found helpful over the years, please share em.

  Read the article

• Why you shouldn't add methods to interfaces in APIs

  - by Simon Cooper

  It is an oft-repeated maxim that you shouldn't add methods to a publically-released interface in an API. Recently, I was hit hard when this wasn't followed. As part of the work on ApplicationMetrics, I've been implementing auto-reporting of MVC action methods; whenever an action was called on a controller, ApplicationMetrics would automatically report it without the developer needing to add manual ReportEvent calls. Fortunately, MVC provides easy hook when a controller is created, letting me log when it happens - the IControllerFactory interface. Now, the dll we provide to instrument an MVC webapp has to be compiled against .NET 3.5 and MVC 1, as the lowest common denominator. This MVC 1 dll will still work when used in an MVC 2, 3 or 4 webapp because all MVC 2+ webapps have a binding redirect redirecting all references to previous versions of System.Web.Mvc to the correct version, and type forwards taking care of any moved types in the new assemblies. Or at least, it should. IControllerFactory In MVC 1 and 2, IControllerFactory was defined as follows: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } So, to implement the logging controller factory, we simply wrap the existing controller factory: internal sealed class LoggingControllerFactory : IControllerFactory { private readonly IControllerFactory m_CurrentController; public LoggingControllerFactory(IControllerFactory currentController) { m_CurrentController = currentController; } public IController CreateController( RequestContext requestContext, string controllerName) { // log the controller being used FeatureSessionData.ReportEvent("Controller used:", controllerName); return m_CurrentController.CreateController(requestContext, controllerName); } public void ReleaseController(IController controller) { m_CurrentController.ReleaseController(controller); } } Easy. This works as expected in MVC 1 and 2. However, in MVC 3 this type was throwing a TypeLoadException, saying a method wasn't implemented. It turns out that, in MVC 3, the definition of IControllerFactory was changed to this: public interface IControllerFactory { IController CreateController(RequestContext requestContext, string controllerName); SessionStateBehavior GetControllerSessionBehavior( RequestContext requestContext, string controllerName); void ReleaseController(IController controller); } There's a new method in the interface. So when our MVC 1 dll was redirected to reference System.Web.Mvc v3, LoggingControllerFactory tried to implement version 3 of IControllerFactory, was missing the GetControllerSessionBehaviour method, and so couldn't be loaded by the CLR. Implementing the new method Fortunately, there was a workaround. Because interface methods are normally implemented implicitly in the CLR, if we simply declare a virtual method matching the signature of the new method in MVC 3, then it will be ignored in MVC 1 and 2 and implement the extra method in MVC 3: internal sealed class LoggingControllerFactory : IControllerFactory { ... public virtual SessionStateBehaviour GetControllerSessionBehaviour( RequestContext requestContext, string controllerName) {} ... } However, this also has problems - the SessionStateBehaviour type only exists in .NET 4, and we're limited to .NET 3.5 by support for MVC 1 and 2. This means that the only solutions to support all MVC versions are: Construct the LoggingControllerFactory type at runtime using reflection Produce entirely separate dlls for MVC 1&2 and MVC 3. Ugh. And all because of that blasted extra method! Another solution? Fortunately, in this case, there is a third option - System.Web.Mvc also provides a DefaultControllerFactory type that can provide the implementation of GetControllerSessionBehaviour for us in MVC 3, while still allowing us to override CreateController and ReleaseController. However, this does mean that LoggingControllerFactory won't be able to wrap any calls to GetControllerSessionBehaviour. This is an acceptable bug, given the other options, as very few developers will be overriding GetControllerSessionBehaviour in their own custom controller factory. So, if you're providing an interface as part of an API, then please please please don't add methods to it. Especially if you don't provide a 'default' implementing type. Any code compiled against the previous version that can't be updated will have some very tough decisions to make to support both versions.

  Read the article

• Slow Ubuntu 10.04 after long time unused

  - by Winston Ewert

  I'm at spring break so I'm back at my parent's house. I've turned my computer on which has been off since January and its unusably slow. This was not the case when I last used the computer in January. It is running 10.04, Memory: 875.5 MB CPU: AMD Athlon 64 X2 Dual Core Processor 4400+ Available Disk Space: 330.8 GB I'm not seeing a large usage of either memory or Disk I/O. If I look at my list of processes there is only a very small amount of CPU usage. However, if I hover over the CPU usage graph that I've on the top bar, I sometimes get really high readings like 100%. It took a long time to boot, to open firefox, to open a link in firefox. As far as I can tell everything that the computer tries to do is just massively slow. Right now, I'm apt-get dist-upgrading to install any updates that I will have missed since last time this computer was on. Any ideas as to what is going on here? UPDATE: I thought to check dmesg and it has a lot of entries like this: [ 1870.142201] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1870.142206] ata3.00: irq_stat 0x40000008 [ 1870.142210] ata3.00: failed command: READ FPDMA QUEUED [ 1870.142217] ata3.00: cmd 60/08:10:c0:4a:65/00:00:03:00:00/40 tag 2 ncq 4096 in [ 1870.142218] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1870.142221] ata3.00: status: { DRDY ERR } [ 1870.142223] ata3.00: error: { UNC } [ 1870.143981] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1870.146758] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1870.146761] ata3.00: configured for UDMA/133 [ 1870.146777] ata3: EH complete [ 1872.092269] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1872.092274] ata3.00: irq_stat 0x40000008 [ 1872.092278] ata3.00: failed command: READ FPDMA QUEUED [ 1872.092285] ata3.00: cmd 60/08:00:c0:4a:65/00:00:03:00:00/40 tag 0 ncq 4096 in [ 1872.092287] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1872.092289] ata3.00: status: { DRDY ERR } [ 1872.092292] ata3.00: error: { UNC } [ 1872.094050] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1872.096795] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1872.096798] ata3.00: configured for UDMA/133 [ 1872.096814] ata3: EH complete [ 1874.042279] ata3.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x0 [ 1874.042285] ata3.00: irq_stat 0x40000008 [ 1874.042289] ata3.00: failed command: READ FPDMA QUEUED [ 1874.042296] ata3.00: cmd 60/08:10:c0:4a:65/00:00:03:00:00/40 tag 2 ncq 4096 in [ 1874.042297] res 41/40:00:c5:4a:65/00:00:03:00:00/40 Emask 0x409 (media error) <F> [ 1874.042300] ata3.00: status: { DRDY ERR } [ 1874.042302] ata3.00: error: { UNC } [ 1874.044048] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1874.046837] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1874.046840] ata3.00: configured for UDMA/133 [ 1874.046861] sd 2:0:0:0: [sda] Unhandled sense code [ 1874.046863] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1874.046867] sd 2:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1874.046872] Descriptor sense data with sense descriptors (in hex): [ 1874.046874] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1874.046883] 03 65 4a c5 [ 1874.046886] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1874.046892] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 03 65 4a c0 00 00 08 00 [ 1874.046900] end_request: I/O error, dev sda, sector 56969925 [ 1874.046920] ata3: EH complete I'm not certain, but that looks like my problem may be a failing hard drive. But the drive is less then a year old, it really shouldn't be failing now...

  Read the article

• SOA Community Newsletter May 2014

  - by JuergenKress

  Registration for the Fusion Middleware Summer Camps 2014 is open – Register asap for one of our bootcamps August 4th – 8th 2014 in Lisbon. Please read details and pre-requisitions careful before you register. We expect that like in the past, the conference will be booked out soon! If you can’t make it to Lisbon attend our SOA Suite 11c free on-demand Bootcamp or  Managing the Complexity of IoT online trainings. With more than 5000 customers, SOA Suite Achieves Significant Customer Adoption and Industry Recognition.Thanks to all our SOA Specialized partners for making our joins SOA customers successful! As a summary of the Industrial SOA series we published the Podcast Show Notes: SOA and Cloud - Where's This Relationship Going? Make sure you use the Oracle Demo Systems for your customer presentations. The demo systems are hosted by Oracle and include complete scenarios based on the latest Middleware version like the new B2B SOA Suite Demo System! For local presentations without fast internet use the SOA/BPM 11.1.1.7.1 Virtual Machine and Case Management Sample. At our SOA Community Workspace (SOA Community membership required) you can get new IoT presentations for Location Based Offers for Banking & Whitepaper and online Webcast & Utility presentation. In this newsletter you will find many articles about OSB: OSB 11g – A Hands-on Tutorial & Using Split-Joins in OSB Services for parallel processing of messages & OSB, Service Callouts and OQL & Working with Oracle Security Token Service. Thanks for sharing all the additional SOA articles within the community: How to configure Oracle SOA/BPM task auto release & Controlling BPEL process flow at runtime & Upgrading to Oracle SOA Suite 11g PS6 (11.1.1.7)? Do this. & BPEL and BPM's performance monitoring using DMS & SOA 11g - Create RESTful Service In Oracle SOA & Wrong timezone causes TopLink warning in SOA suite. Highlight of the BPM and ACM section is the IDC BPM vendor report. The new bundle Patch including the ACM UI is now available. If you want to learn more about ACM, get the ACM training material at our SOA Community Workspace (SOA Community membership required). A great demo for your next BPM presentation is the BPM iPad app. It’s simpleMobile BPM is Not An Option. It’s a Necessity. Thanks for sharing all the additional BPM articles within the community: BPM update adds Case Management Web Interface and REST APIs & Implementing deadline functionality with Oracle Adaptive Case Management & BPM 11g Timeout Heuristics & Humantask Assignment: Names and Expressions Assignment via Rules. In our last section Architecture, it is all about design. Usability is a key factor for customer satisfaction, worth to spend some time and read the Simplified User Experience Design Patterns eBook. Great blueprint for your project! See you in Lisbon! To read the newsletter please visit www.tinyurl.com/soaNewsMay2014 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: newsletter,SOA Community newsletter,SOA Community,Oracle,OPN,Jürgen Kress

  Read the article

• How can I draw an arrow at the edge of the screen pointing to an object that is off screen?

  - by Adam Henderson

  I am wishing to do what is described in this topic: http://www.allegro.cc/forums/print-thread/283220 I have attempted a variety of the methods mentioned here. First I tried to use the method described by Carrus85: Just take the ratio of the two triangle hypontenuses (doesn't matter which triagle you use for the other, I suggest point 1 and point 2 as the distance you calculate). This will give you the aspect ratio percentage of the triangle in the corner from the larger triangle. Then you simply multiply deltax by that value to get the x-coordinate offset, and deltay by that value to get the y-coordinate offset. But I could not find a way to calculate how far the object is away from the edge of the screen. I then tried using ray casting (which I have never done before) suggested by 23yrold3yrold: Fire a ray from the center of the screen to the offscreen object. Calculate where on the rectangle the ray intersects. There's your coordinates. I first calculated the hypotenuse of the triangle formed by the difference in x and y positions of the two points. I used this to create a unit vector along that line. I looped through that vector until either the x coordinate or the y coordinate was off the screen. The two current x and y values then form the x and y of the arrow. Here is the code for my ray casting method (written in C++ and Allegro 5) void renderArrows(Object* i) { float x1 = i->getX() + (i->getWidth() / 2); float y1 = i->getY() + (i->getHeight() / 2); float x2 = screenCentreX; float y2 = ScreenCentreY; float dx = x2 - x1; float dy = y2 - y1; float hypotSquared = (dx * dx) + (dy * dy); float hypot = sqrt(hypotSquared); float unitX = dx / hypot; float unitY = dy / hypot; float rayX = x2 - view->getViewportX(); float rayY = y2 - view->getViewportY(); float arrowX = 0; float arrowY = 0; bool posFound = false; while(posFound == false) { rayX += unitX; rayY += unitY; if(rayX <= 0 || rayX >= screenWidth || rayY <= 0 || rayY >= screenHeight) { arrowX = rayX; arrowY = rayY; posFound = true; } } al_draw_bitmap(sprite, arrowX - spriteWidth, arrowY - spriteHeight, 0); } This was relatively successful. Arrows are displayed in the bottom right section of the screen when objects are located above and left of the screen as if the locations of the where the arrows are drawn have been rotated 180 degrees around the center of the screen. I assumed this was due to the fact that when I was calculating the hypotenuse of the triangle, it would always be positive regardless of whether or not the difference in x or difference in y is negative. Thinking about it, ray casting does not seem like a good way of solving the problem (due to the fact that it involves using sqrt() and a large for loop). Any help finding a suitable solution would be greatly appreciated, Thanks Adam

  Read the article

• Launching Ops Center 12c

  - by user12601629

  Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo.  I thought that sounded like a fine idea!  You see, I have always loved Japan.  I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year.  It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming.  If you've never been in Japan for cherry blossom season, it's a must see!  Here are a couple of pics for you. Here is a picture from Roppongi, near the conference.  Here's a picture near the Imperial Palace.  A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address.  It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products.  It was a packed house for the keynote.  Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean?  It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86.  Now you can build clouds of Solaris Zones with ease!  Second, we've much more deeply integrated high-end storage and network management into the cloud layers.  These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11.  That would have been easy, but also boring! We support S11 deeply.  Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework.  If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems.  These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage.  We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components.  The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner.  It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas.  Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

  Read the article

• Flow-Design Cheat Sheet &ndash; Part II, Translation

  - by Ralf Westphal

  In my previous post I summarized the notation for Flow-Design (FD) diagrams. Now is the time to show you how to translate those diagrams into code. Hopefully you feel how different this is from UML. UML leaves you alone with your sequence diagram or component diagram or activity diagram. They leave it to you how to translate your elaborate design into code. Or maybe UML thinks it´s so easy no further explanations are needed? I don´t know. I just know that, as soon as people stop designing with UML and start coding, things end up to be very different from the design. And that´s bad. That degrades graphical designs to just time waste on paper (or some designer). I even believe that´s the reason why most programmers view textual source code as the only and single source of truth. Design and code usually do not match. FD is trying to change that. It wants to make true design a first class method in every developers toolchest. For that the first prerequisite is to be able to easily translate any design into code. Mechanically, without thinking. Even a compiler could do it :-) (More of that in some other article.) Translating to Methods The first translation I want to show you is for small designs. When you start using FD you should translate your diagrams like this. Functional units become methods. That´s it. An input-pin becomes a method parameter, an output-pin becomes a return value: The above is a part. But a board can be translated likewise and calls the nested FUs in order: In any case be sure to keep the board method clear of any and all business logic. It should not contain any control structures like if, switch, or a loop. Boards do just one thing: calling nested functional units in proper sequence. What about multiple input-pins? Try to avoid them. Replace them with a join returning a tuple: What about multiple output-pins? Try to avoid them. Or return a tuple. Or use out-parameters: But as I said, this simple translation is for simple designs only. Splits and joins are easily done with method translation: All pretty straightforward, isn´t it. But what about wires, named pins, entry points, explicit dependencies? I suggest you don´t use this kind of translation when your designs need these features. Translating to methods is for small scale designs like you might do once you´re working on the implementation of a part of a larger design. Or maybe for a code kata you´re doing in your local coding dojo. Instead of doing TDD try doing FD and translate your design into methods. You´ll see that way it´s much easier to work collaboratively on designs, remember them more easily, keep them clean, and lessen the need for refactoring. Translating to Events [coming soon]

  Read the article

• Ragdoll continuous movement

  - by Siddharth

  I have created a ragdoll for my game but the problem I found was that the ragdoll joints are not perfectly implemented so they are continuously moving. Ragdoll does not stand at fix place. I here paste my work for that and suggest some guidance about that so that it can stand on fix place. chest = new Chest(pX, pY, gameObject.getmChestTextureRegion(), gameObject); head = new Head(pX, pY - 16, gameObject.getmHeadTextureRegion(), gameObject); leftHand = new Hand(pX - 6, pY + 6, gameObject.getmHandTextureRegion() .clone(), gameObject); rightHand = new Hand(pX + 12, pY + 6, gameObject .getmHandTextureRegion().clone(), gameObject); rightHand.setFlippedHorizontal(true); leftLeg = new Leg(pX, pY + 18, gameObject.getmLegTextureRegion() .clone(), gameObject); rightLeg = new Leg(pX + 7, pY + 18, gameObject.getmLegTextureRegion() .clone(), gameObject); rightLeg.setFlippedHorizontal(true); gameObject.getmScene().registerTouchArea(chest); gameObject.getmScene().attachChild(chest); gameObject.getmScene().registerTouchArea(head); gameObject.getmScene().attachChild(head); gameObject.getmScene().registerTouchArea(leftHand); gameObject.getmScene().attachChild(leftHand); gameObject.getmScene().registerTouchArea(rightHand); gameObject.getmScene().attachChild(rightHand); gameObject.getmScene().registerTouchArea(leftLeg); gameObject.getmScene().attachChild(leftLeg); gameObject.getmScene().registerTouchArea(rightLeg); gameObject.getmScene().attachChild(rightLeg); // head revolute joint revoluteJointDef = new RevoluteJointDef(); revoluteJointDef.enableLimit = true; revoluteJointDef.initialize(head.getHeadBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(0f, -0.5f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); headRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // // left leg revolute joint revoluteJointDef.initialize(leftLeg.getLegBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(-0.15f, 0.75f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); leftLegRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // right leg revolute joint revoluteJointDef.initialize(rightLeg.getLegBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(0.15f, 0.75f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); rightLegRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // left hand revolute joint revoluteJointDef.initialize(leftHand.getHandBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(-0.25f, 0.1f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); leftHandRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef); // right hand revolute joint revoluteJointDef.initialize(rightHand.getHandBody(), chest.getChestBody(), chest.getChestBody().getWorldCenter()); revoluteJointDef.localAnchorA.set(0f, 0f); revoluteJointDef.localAnchorB.set(0.25f, 0.1f); revoluteJointDef.lowerAngle = (float) (0f / (180 / Math.PI)); revoluteJointDef.upperAngle = (float) (0f / (180 / Math.PI)); rightHandRevoluteJoint = (RevoluteJoint) gameObject.getmPhysicsWorld() .createJoint(revoluteJointDef);

  Read the article

• Remote Desktop (Vino-Server) connects but display doesn't work?

  - by kmassada

  Ubuntu comes default with vino-server, I can remote into my machine, and connect to it, however, the display inside my remote client, is a mirror of my own desktop. I tried using one monitor, thinking that's what is the issue but still won't work. (vino-server:3608): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed 25/07/2012 12:23:58 PM Autoprobing TCP port in (all) network interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Autoprobing selected port 5900 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'No Authentication' (1) 25/07/2012 12:23:58 PM Re-binding socket to listen for VNC connections on TCP port 5900 in (all) interface 25/07/2012 12:23:58 PM Listening IPv6://[::]:5900 25/07/2012 12:23:58 PM Listening IPv4://0.0.0.0:5900 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Clearing authTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'VNC Authentication' (2) 25/07/2012 12:23:58 PM Clearing securityTypes 25/07/2012 12:23:58 PM Clearing authTypes 25/07/2012 12:23:58 PM Advertising security type: 'TLS' (18) 25/07/2012 12:23:58 PM Advertising authentication type: 'VNC Authentication' (2) 25/07/2012 12:23:58 PM Advertising security type: 'VNC Authentication' (2) (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:24:16 PM [IPv4] Got connection from client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:24:16 PM other clients: 25/07/2012 12:24:29 PM Client Protocol Version 3.7 25/07/2012 12:24:29 PM Advertising security type 18 25/07/2012 12:24:29 PM Advertising security type 2 25/07/2012 12:24:30 PM Client returned security type 18 25/07/2012 12:24:30 PM Advertising authentication type 2 25/07/2012 12:24:30 PM Client returned authentication type 2 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -258 25/07/2012 12:24:37 PM Enabling NewFBSize protocol extension for client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type 1464686185 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -259 25/07/2012 12:24:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -257 (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:24:55 PM Client static-XXXX.bltmmd.fios.verizon.net gone 25/07/2012 12:24:55 PM Statistics: 25/07/2012 12:24:55 PM key events received 0, pointer events 80 25/07/2012 12:24:55 PM framebuffer updates 43, rectangles 152, bytes 292401 25/07/2012 12:24:55 PM tight rectangles 152, bytes 292401 25/07/2012 12:24:55 PM raw bytes equivalent 11621332, compression ratio 39.744502 25/07/2012 12:25:21 PM [IPv4] Got connection from client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:25:21 PM other clients: 25/07/2012 12:25:28 PM Client Protocol Version 3.7 25/07/2012 12:25:28 PM Advertising security type 18 25/07/2012 12:25:28 PM Advertising security type 2 25/07/2012 12:25:28 PM Client returned security type 18 25/07/2012 12:25:29 PM Advertising authentication type 2 25/07/2012 12:25:29 PM Client returned authentication type 2 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -258 25/07/2012 12:25:37 PM Enabling NewFBSize protocol extension for client static-XXXX.bltmmd.fios.verizon.net 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type 1464686185 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -259 25/07/2012 12:25:37 PM rfbProcessClientNormalMessage: ignoring unknown encoding type -257 (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. 25/07/2012 12:25:47 PM Client static-XXXX.bltmmd.fios.verizon.net gone 25/07/2012 12:25:47 PM Statistics: 25/07/2012 12:25:47 PM key events received 0, pointer events 7283 25/07/2012 12:25:47 PM framebuffer updates 27, rectangles 82, bytes 113354 25/07/2012 12:25:47 PM tight rectangles 82, bytes 113354 25/07/2012 12:25:47 PM raw bytes equivalent 5831432, compression ratio 51.444431 couple of things I notice, the following error occurs over and over again. the menu error seems to be caused by ubuntu, similar problems occur http://trac.wxwidgets.org/ticket/14292, (vino-server:3608): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent. the second one also seem to be a display related issue, can't seem to figure out a solution. I really rather try to fix this issue than have to use the other vnc clients most suggest. (vino-server:3608): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion `global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed

  Read the article

• Is Oracle Policy Automation a Fit for My Agency? I'll bet it is.

  - by jeffrey.waterman

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Recently, I stumbled upon a new(-ish) whitepaper now posted on the Oracle Technology Network around Oracle Policy Automation (OPA). This paper is certain to become a must read for any customer interested in rules automation. What is OPA?  If you are not sitting in your favorite Greek restaurant waiting for that order of Saganaki to appear, OPA is Oracle’s solution for automated streamlining, standardizing, and the maintenance of policy. It is a specialized rules platform that simplifies the automation of rules and policies, putting the analysis in the hands of the analysts, not the IT organization. In other words, OPA allows the organization to be more efficient by eliminating (or at a minimum, reducing the engagement of) the middle man from the process. The whitepaper I mention above is titled, “Is Oracle Policy Automation a Good Fit for My Business?”. This short document walks the reader through use cases and advice for the reader to consider when deciding if OPA is right for their agency. The paper outlines many different scenarios, different uses of OPA in production today and, where OPA may not be a good fit. Many of the use case examples revolve around end user questionnaires or analyst research. What is often overlooked is OPA’s ability to act as a rules engine behind the scenes. That is, take inputs from one source (e.g., personnel data), process that data in OPA and send the output (e.g., pay data with benefits deductions) to a second source. The rules have been automated, no necessary human intervention to perform analysis. A few of my customers have used the embedded OPA solution to improve transaction processing and reduce the time spent analyzing exceptions. I suggest any reader whose organization is reliant on or deals with high complexity, volume or volatility in rules that are based on documentation – or which need to be documented – take a look at Oracle Policy Automation. You can find the white paper on Oracle Technology Network. You can find the white paper in the Oracle Policy Automation of the OTN. You can find more information around OPA on oracle.com. Finally, you can send me a question any time at [email protected] Thank you for reading. If you have any topics around Oracle Applications in the Federal or Public Sector industries you would like to see addressed in this blog, please leave suggestions in the comments section and I will do my best to address in a future post.

  Read the article

• Silverlight Cream for January 15, 2011 -- #1028

  - by Dave Campbell

  Note to #1024 Swag Winners: I'm sending emails to the vendors Sunday night, thanks for your patience (a few of you have not contacted me yet) In this Issue: Ezequiel Jadib, Daniel Egan(-2-), Page Brooks, Jason Zander, Andrej Tozon, Marlon Grech, Jonathan van de Veen, Walt Ritscher, Jesse Liberty, Jeremy Likness, Sacha Barber, William E. Burrows, and WindowsPhoneGeek. Above the Fold: Silverlight: "Building a Radar Control in Silverlight - Part 1" Page Brooks WP7: "Tutorial: Dynamic Tile Push Notification for Windows Phone 7" Jason Zander Training: "WP7 Unleashed Session I–Hands on Labs" Daniel Egan From SilverlightCream.com: Silverlight Rough Cut Editor SP1 Released Ezequiel Jadib has an announcement about the Rough Cut Editor SP1 release, and he walks you through the content, installation and a bit of the initial use. WP7 Unleashed Session I–Hands on Labs Daniel Egan posted Part 1 of 3 of a new WP7 HOL ... video online and material to download... get 'em while they're hot! WP7 Saving to Media Library Daniel Egan has another post up as well on saving an image to the media library... not the update from Tim Heuer... all good info Building a Radar Control in Silverlight - Part 1 This freakin' cool post from Page Brooks is the first one of a series on building a 'Radar Control' in Silverlight ... seriously, go to the bottom and run the demo... I pretty much guarantee you'll take the next link which is download the code... don't forget to read the article too! Tutorial: Dynamic Tile Push Notification for Windows Phone 7 Jason Zander has a nice-looking tutorial up on dynamic tile notifications... good diagrams and discussion and plenty of code. Reactive.buffering.from event. Andrej Tozon is continuing his Reactive Extensions posts with this one on buffering: BufferWithTime and BufferWIthCount ... good stuff, good write-up, and the start of a WP7 game? MEFedMVVM with PRISM 4 Marlon Grech combines his MEFedMVVM with Prism 4, and says it was easy... check out the post and the code. Adventures while building a Silverlight Enterprise application part #40 Jonathan van de Veen has a discussion up about things you need to pay attention to as your project gets close to first deployment... lots of good information to think about Silverlight or not. Customize Windows 7 Preview pane for XAML files Walt Ritscher has a (very easy) XAML extension for Windows 7 that allows previewing of XAML files in an explorer window... as our UK friends say "Brilliant!" Entity Framework Code-First, oData & Windows Phone Client From the never-ending stream of posts that is Jesse Liberty comes this one on EF Code-First... so Jesse's describing Code-First and OData all wrapped up about a WP7 app Sterling Silverlight and Windows Phone 7 Database Triggers and Auto-Identity Sterling and Database Triggers sitting in a tree... woot for WP7 from Jeremy Likness... provides database solutions including Validation, Data-specific concerns such as 'last modified', and post-save processing ... all good, Jeremy! A Look At Fluent APIs Sacha Barber has a great post up that isn't necessarily Silverlight, but is it? ... we've been hearing a lot about Fluent APIs... read on to see what the buzz is. Windows Phone 7 - Part 3 - Final Application William E. Burrows has Part 3 of his WP7 tutorial series up... this one completing the Golf Handicap app by giving the user the ability to manage scores. User Control vs Custom Control in Silverlight for WP7 WindowsPhoneGeek has a great diagram and description-filled post up on User Controls and Custom Controls in WP7... good external links too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Algorithm for tracking progress of controller method running in background

  - by SilentAssassin

  I am using Codeigniter framework for PHP on Windows platform. My problem is I am trying to track progress of a controller method running in background. The controller extracts data from the database(MySQL) then does some processing and then stores the results again in the database. The complete aforesaid process can be considered as a single task. A new task can be assigned while another task is running. The newly assigned task will be added in a queue. So if I can track progress of the controller, I can show status for each of these tasks. Like I can show "Pending" status for tasks in the queue, "In Progress" for tasks running and "Done" for tasks that are completed. Main Issue: Now first thing I need to find is an algorithm to track the progress of how much amount of execution the controller method has completed and that means tracking how much amount of method has completed execution. For instance, this PHP script tracks progress of array being counted. Here the current state and state after total execution are known so it is possible to track its progress. But I am not able to devise anything analogous to it in my case. Maybe what I am trying to achieve is programmtically not possible. If its not possible then suggest me a workaround or a completely new approach. If some details are pending you can mention them. Sorry for my ignorance this is my first post here. I welcome you to point out my mistakes. EDIT: Database outline: The URL(s) and keyword(s) are first entered by user which are stored in a database table called link_master and keyword_master respectively. Then keywords are extracted from all the links present in this table and compared with keywords entered by user and their frequency is calculated which is the final result. And the results are stored in another table called link_result. Now sub-links are extracted from the domain links and stored in a table called sub_link_master. Now again the keywords are extracted from these sub-links and the corresponding results are stored in a table called sub_link_result. The number of records cannot be defined beforehand as the number of links on any web page can be different. Only the cardinality of *link_result* table can be known which will be equal to multiplication of number of keyword(s) and URL(s) . I insert multiple records at a time using this resource. Controller outline: The controller extracts keywords from a web page and also extracts keywords from all the links present on that page. There is a method called crawlLink. I used Rolling Curl to extract keywords and web page content. It has callback function which I used for extracting keywords alongwith generating results and extracting valid sub-links. There is a insertResult method which stores results for links and sub-links in the respective tables. Yes, the processing depends on the number of records. The more the number of records, the more time it takes to execute: Consider this scenario: Number of Domain Links = 1 Number of Keywords = 3 Number of Domain Links Result generated = 3 (3 x 1 as described in the question) Number of Sub Links generated = 41 Number of Sub Links Result = 117 (41 x 3 = 123 but some links are not valid or searchable) Approximate time taken for above process to complete = 55 seconds. The above result is for a single link. I want to track the progress of the above results getting stored in database. When all results are stored, the task is complete. If results are getting stored, the task is In Progress. I am not clear how can I track this progress.

  Read the article

• NetworkManager Applet shows no networks

  - by Kkelk

  I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

  Read the article

• Why I Love the Social Management Platform I Use

  - by Mike Stiles

  Not long ago, I asked the product heads for the various components of the Oracle Social Cloud’s SRM to say what they thought was coolest about their component. And while they did a fine job, it was recently pointed out to me that no one around here uses the platform in a real-world setting more than I do, as I not only blog and podcast my brains out, I also run Oracle Social’s own social properties. Of course I’m pro-Oracle Social’s product. Duh. But if you can get around immediately writing this off as a puff piece, there are real reasons beyond my employment that the Oracle SRM works for me as a community manager. If it didn’t, I could have simply written about something else, like how people love smartphones or something genius like that. Post Grid I like seeing what I want to see. I’m difficult that way. Post grid lets me see all posts for all channels, with custom columns showing me how posts are doing. I can filter the grid by social channel, published, scheduled, draft, suggested, etc. Then there’s a pullout side panel that shows me post details, including engagement analytics. From the pullout, I can preview the post, do a quick edit, a full edit, or (my favorite) copy a post so I can edit it and schedule it for other times so I don’t have to repeat from scratch. I’m not lazy, just time conscious. The Post Creation Environment Given our post volume, I need this to be as easy as it can be. I can highlight which streams I want the post to go out on, edit for the individual streams, maintain a media library that’s easy to upload to and attach from, tag posts, insert links that auto-shorten to an orac.le shortlink, schedule with a nice calendar visual, geo-target, drop photos inline into Twitter, and review each post. Watching My Channels The Engage component of the Oracle SRM brings in and drops into a grid the activity that’s happening on all my channels. I keep this open round-the-clock. Again, I get to see only what I want; social network, stream, unread messages, engagement by how I labeled them, and date range. I can bring up a post with a click, reply, label it, retweet it, assign it, delete it, archive it, etc. So don’t bother trying to be a troll on my channels. Analytics Social publishing and engaging 24/7 would be pretty unrewarding if I couldn’t see how our audience was responding. Frankly, I get more analytics than I know what to do with (I’m a content creator, not a data analyst). But I do know what numbers I care about, and they’re available by channel, date range, and campaigns. I’m seeing fan count, sources and demographics. I’m seeing engagement, what kinds of posts are getting engagement, and top engagers. I’m seeing my reach, both organic and paid. I’m seeing how individual posts performed in terms of engagement and virality, and posting time/date insight. Have I covered all the value propositions? I’ve covered pathetically few of them. It would be impossible in blog length to give shout-outs to the vast number of features and functionalities. From organizing teams and managing permissions with Workflow to the powerful ability to monitor topics (and your competition) across the web in Listen, it’s a major, and increasingly necessary, weapon in your social marketing arsenal. The life of a Community Manager is not for everybody. So if the Oracle SRM can actually make a Community Manager’s life easier, what’s not to love? I invite you to take a look at and participate in our Oracle Social Cloud social channels! Facebook Twitter YouTube Google Plus LinkedIn Daily Podcast on iHeartRadio @mikestiles @oraclesocial Photo: freeimages.com

  Read the article

• Enable grub boot menu on new system

  - by Remus Rigo

  I have installed Ubuntu 11.04 and I would like to see the boot menu when the system starts (by default it is hidden or the timeout=0) # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 insmod jpeg if background_image /boot/grub/boot.jpg; then true else set menu_color_normal=white/black set menu_color_highlight=black/light-gray fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic } menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 echo 'Loading Linux 2.6.38-8-generic ...' linux /boot/vmlinuz-2.6.38-8-generic root=UUID=44f311b4-0b40-4d10-b004-78108539fc39 ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 44f311b4-0b40-4d10-b004-78108539fc39 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• Keeping an Eye on Your Storage

  - by Fatherjack

  There are plenty of resources that advise you about looking for signs that your storage hardware is having problems. SQL Server Alerts for 823, 824 and 825 are covered here by Paul Randall of SQL Skills: http://www.sqlskills.com/blogs/paul/a-little-known-sign-of-impending-doom-error-825/ and here by me: https://www.simple-talk.com/blogs/2011/06/27/alerts-are-good-arent-they/. Now until very recently I wasn’t aware that there was a different way to track the 823 + 824 errors. It was by complete chance that I happened to be searching about in the msdb database when I found the suspect_pages table. Running a query against it I got zero rows. This, as it turns out is a good thing. Highlighting the table name and pressing F1 got me nowhere – Is it just me or does Books Online fail to load properly for no obvious reason sometimes? So I typed the table name into the search bar and got my local version of http://msdn.microsoft.com/en-us/library/ms174425.aspx. From that we get the following description: Contains one row per page that failed with a minor 823 error or an 824 error. Pages are listed in this table because they are suspected of being bad, but they might actually be fine. When a suspect page is repaired, its status is updated in the event_type column. So, in the table we would, on healthy hardware, expect to see zero rows but on disks that are having problems the event_type column would show us what is going on. Where there are suspect pages on the disk the rows would have an event_type value of 1, 2 or 3, where those suspect pages have been restored, repaired or deallocated by DBCC then the value would be 4, 5 or 7. Having this table means that we can set up SQL Monitor to check the status of our hardware as we can create a custom metric based on the query below: USE [msdb] go SELECT COUNT(*) FROM [dbo].[suspect_pages] AS sp All we need to do is set the metric to collect this value and set an alert to email when the value is not 1 and we are then able to let SQL Monitor take care of our storage. Note that the suspect_pages table does not have any updates concerning Error 825 which the links at the top of the page cover in more detail. I would suggest that you set SQL Monitor to alert on the suspect_pages table in addition to other taking other measures to look after your storage hardware and not have it as your only precaution. Microsoft actually pass ownership and administration of the suspect_pages table over to the database administrator (Manage the suspect_pages Table (SQL Server)) and in a surprising move (to me at least) advise DBAs to actively update and archive data in it. The table will only ever contain a maximum of 1000 rows and once full, new rows will not be added. Keeping an eye on this table is pretty important, although In my opinion, if you get to 1000 rows in this table and are not already waiting for new disks to be added to your server you are doing something wrong but if you have 1000 rows in there then you need to move data out quickly because you may be missing some important events on your server.

  Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >