Search Results

Search found 11142 results on 446 pages for 'incognito mode'.

Page 397/446 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

  • Port forwarding not working properly

    - by sudo work
    I'm trying to host a small web server from my home network; however, I have not been able to successfully port forward ports to the local server. My current network topology looks like this: Cable Modem/Router - Secondary Wireless Router - Many computers (including server) The modem/router I'm using is a Cisco (Scientific Atlantic) DPC2100, provided by my ISP. The wireless router that I'm using as the central hub to my home network is a Linksys E3000. The computer being used as a server is running Ubuntu 10.04 Server Edition. The main issue is that I can't access the server remotely, using my WAN IP address. I have port forwarded my wireless router; however, I believe that I need to somehow set my modem to bridge mode. As far as I can tell though, this isn't possible. Here are the various IP address settings: DPC2100 WAN: 69.xxx.xxx.xxx Internal IP: 192.168.100.1 Internal Network: 192.168.7.0 E3000 IP Address: 192.168.7.2 Gateway: 192.168.7.1 Internal IP: 192.168.1.1 Internal Network: 192.168.1.0 Server IP Address: 192.168.1.123 Gateway: 192.168.1.1 Now I can do an nmap at various nodes, and here are the results (from the server): nmap localhost: 22,25,53,80,110,139,143,445,631,993,995,3306,5432,8080 open nmap 192.168.7.2: 22,25,80 (filtered),110,139,445 open (ports I have forwarded in the E3000)* nmap 69.xxx.xxx.xxx: 1720 open *For some reason, I can SSH into the server at 192.168.7.2, but not view the website. Here are also some other settings: /etc/hosts/ 127.0.0.1 localhost 127.0.1.1 servername ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/apache2/sites-available/default snippet <VirtualHost *:80> DocumentRoot /srv/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> ... </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> ... </Directory> ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> ... </Directory> </VirtualHost> Let me know if you need any other information; some stuff probably slipped my mind.

    Read the article

  • Puppet and launchd services?

    - by Joel Westberg
    We have a production environment configured with Puppet, and want to be able to set up a similar environment on our development machines: a mix of Red Hats, Ubuntus and OSX. As might be expected, OSX is the odd man out here, and sadly, I'm having a lot of trouble with getting this to work. My first attempt was using macports, using the following declaration: package { 'rabbitmq-server': ensure => installed, provider => macports, } but this, sadly, generates the following error: Error: /Stage[main]/Rabbitmq/Package[rabbitmq-server]: Could not evaluate: Execution of '/opt/local/bin/port -q installed rabbitmq-server' returned 1: usage: cut -b list [-n] [file ...] cut -c list [file ...] cut -f list [-s] [-d delim] [file ...] while executing "exec dscl -q . -read /Users/$env(SUDO_USER) NFSHomeDirectory | cut -d ' ' -f 2" (procedure "mportinit" line 95) invoked from within "mportinit ui_options global_options global_variations" Next up, I figured I'd give homebrew a try. There is no package provider available by default, but puppet-homebrew seemed promising. Here, I got much farther, and actually managed to get the install to work. package { 'rabbitmq': ensure => installed, provider => brew, } file { "plist": path => "/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist", source => "/usr/local/opt/rabbitmq/homebrew.mxcl.rabbitmq.plist", ensure => present, owner => root, group => wheel, mode => 0644, } service { "homebrew.mxcl.rabbitmq": enable => true, ensure => running, provider => "launchd", require => [ File["/Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist"] ], } Here, I don't get any error. But RabbitMQ doesn't start either (as it does if I do a manual load with launchctl) [... snip ...] Debug: Executing '/bin/launchctl list' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /Library/LaunchDaemons/homebrew.mxcl.rabbitmq.plist' Debug: Executing '/usr/bin/plutil -convert xml1 -o /dev/stdout /var/db/launchd.db/com.apple.launchd/overrides.plist' Debug: /Schedule[weekly]: Skipping device resources because running on a host Debug: /Schedule[puppet]: Skipping device resources because running on a host Debug: Finishing transaction 2248294820 Debug: Storing state Debug: Stored state in 0.01 seconds Finished catalog run in 25.90 seconds What am I doing wrong?

    Read the article

  • NFS4 / ZFS: revert ACL to clean/inherited state

    - by Keiichi
    My problem is identical to this Windows question, but pertains NFS4 (Linux) and the underlying ZFS (OpenIndiana) we are using. We have this ZFS shared via NFS4 and CIFS for Linux and Windows users respectively. It would be nice for both user groups to benefit from ACLs, but the one missing puzzle piece goes thusly: Each user has a home, where he sets a top-level, inherited ACL. He can later on refine permissions for the contained files/folders iteratively. Over time, sometimes permissions need to be generalized again to avoid increasing pollution of ACL entries. You can tweak the ACL of every single file if need be to obtain the wanted permissions, but that defeats the purpose of inherited ACLs. So, how can an ACL be completely cleared like in the question linked above? I have found nothing about what a blank, inherited ACL should look like. This usecase simply does not seem to exist. In fact, the solaris chmod manpage clearly states A- Removes all ACEs for current ACL on file and replaces current ACL with new ACL that represents only the current mode of the file. I.e. we get three new ACL entries filled with stuff representing the permission bits, which is rather useless for cleaning up. If I try to manually remove every ACE, on the last one I get chmod A0- <file> chmod: ERROR: Can't remove all ACL entries from a file Which by the way makes me think: and why not? In fact, I really want the whole file-specific ACL gone. The same holds for linux, which enumerates ACEs starting with 1(!), and verbalizes its woes less diligently nfs4_setacl -x 1 <file> Failed setxattr operation: Unknown error 524 So, what is the idea behind ACLs under Solaris/NFS? Can they never be cleaned up? Why does the recursion option for the ACL setting commands pollute all children instead of setting a single ACL and making the children inherit? Is this really the intention of the designers? I can clean up the ACLs using a windows client perfectly well, but am I supposed to tell the linux users they have to switch OS just to consolidate permissions?

    Read the article

  • GPU not powering on

    - by Lerp
    So I got home from work yesterday and went to turn my computer on as per usual to be greeted by this: The screens remained black, so I rebooted; I go as far as GRUB before my screens went black again. I rebooted again, they didn't turn on. I rebooted again, I got as far as the windows login screen. This time I unplugged it, opened it up and cleaned it but to no luck. The GPU was still being tempermental. I repeated the process of turning off and on several times until one time it work as normal. I happily played games for the rest of the night (5-6 hours?) thinking everything was jolly good now. Well I get home from work today and it is doing the SAME thing. Sometimes everything displays normally for a few seconds to minutes then the screens go black; then sometimes the screens don't come on at all. Summary and additional points Screens sometimes turn on before shortly turning off, sometimes they don't; I cannot seem to determine any pattern between when they do or do not turn off. The build has been working fine for about 8 months now so I know it's not hardware incompatibility. If I plug a monitor into the on board graphics I can use the PC normally (just in low graphics mode) I have two monitors and it's a case of they both turn on or not. So I think I can rule out the monitors being dead. I have tried replacing the GPU I have tried replacing the RAM I have tried flashing the CMOS I have tried cleaning the inside The GPU is a Radeon HD 7870 My questions Is my GPU dead? It's not very old and I would rather have a method of being certain it's the GPU before I fork out some money I can't really afford. I do not have a second PC here to test it in. If my GPU is dead why does it sometimes work and sometimes not? Update Okay, it was working again.. at least I thought it was. I left it running for 10-20minutes with the screens black. Turned it off and straight back on and it worked for all of 10minutes. I was then updating the post in joy thinking I could play some games for the rest of the night when BAM it went black again. So yeah, I don't know :C

    Read the article

  • Graphics card artifacting

    - by White Phoenix
    This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

    Read the article

  • Virtualbox - routing subnet to bridge adapters

    - by user42384
    Hello, I have set up a Debian Lenny box with 3 vbox Lenny machines running eth0 of the host in bridged mode (on virtualbox 3.1.6). When testing in my local LAN, this all worked perfectly well and traffic flowed to and from the IPs of the virtual machines as it should. However, now that it's in its co-lo home, the networking setup is a bit different, and I'm unable to get traffic to flow to the vboxes properly. Specifically, the host has its own Primary IP, and I have a separate subnet of 8 (6 usable) IPs routed to the box for use by the vboxes. So, eth0 on host is: Machine IP: 2x.x.x.137 Gateway IP: 2x.x.x.138 Subnet Msk: 255.255.255.252 Subnet for vboxes is Subnet: 2x.x.x.240/29 Netmask: 255.255.255.248 vbox1 is configured to 2x.x.x.241 on eth0 as follows: auto eth0 iface eth0 inet static address 2x.x.x.241 netmask 255.255.255.248 Setting up a virtual interface (eth0:0) on the host with one of these subnet IPs allows me to ping to that address only from vbox1, and it allows me to ping vbox1 from the host. I can also ping that virtual interface perfectly well from outside, so the IPs are definitely landing at my machine. It seems I'm missing some sort of routing instruction either on the host or vbox1 to get traffic moving between the subnet and the default gateway, but I can't seem to figure out what it should be, or what glaringly obvious thing i'm missing. Most of my obvious attempts (the gw of eth0, the ip of eth0) were rejected by route command with SIOCADDRT: No such device (eg - i can't find it). I tried setting vbox1 to bridge on eth0:0, but this was not an acceptable device name and VBoxHeadless refused to start. The physical machine does have an unused physical NIC at eth1 that can be used if necessary for something or other. Host machine is running iptables configured by ferm, have experimented with it allowing forwarding for that subnet, but I wouldn't have thought this was necessary given the nature of the virtualbox devices (nor did it actually work). Clearing out all of these rules for a blank iptables set does not resolve the issue. (you can see ferm generated iptables at http://codedumper.com/ojaze) Thanks for any help you can give... Patrick

    Read the article

  • How to temporary disable a mirror video driver in windows xp registry

    - by happy clicker
    Because its a lot of text, I will ask first my question and then explain what the base problem is. Perhaps someone can give me a solution to the base problem: Is there is a way to temporary disable mirror video drivers (through registry or so), without uninstalling the corresponding software. I tested changing the enumeration in LocalMachine\Hardware\DeviceMap\Video but after reboot always the old configuration is restored. Explanation of the base problem We are working on a wpf-project for a department of a big company. There we have the problem that WPF renders only in software mode, although the hardware they have, must support hardware rendering (Tier 2). After searching for a solution to the problem, we found out that direct 3d does not work properly and we think thats why WPF can only use SW-rendering. In dxdiag.exe the direct3d-acceleration is enabled, but if we start the test-routine it always fails saying that it has not enough memory (it says memory, not video memory!). I have seen there 3 different types of pc’s (they have some hundreds of each type) and every type shows the exactly same behavior. We tried to update all the drivers, also dx (Version 9.0c) and we searched a lot in the web but could not find a solution. All the pcs have Intel Dual-Core processors or better, one type has an Intel gma 9000 graphics card the other two types have actual ATI and NVidia graphic-cards with 256MB onboard memory. Also the system memory is at least 2GB. Windows is XPSP3. The pc’s are of two different manufacturers. Because we see the exactly same behavior on every computer of this three very different computer-types, we don’t think that this is a driver or a direct x problem. What we’ve found in other newsgroups is, that direct x could be disturbed through mirror-video drivers such as NetMeeting, VNC and other remote desktop-installations. In the registry, we see under LocalMachine\Hardware\DeviceMap\Video a lot of such mirror-entries and we find also the definitions in the CurrentControlSet\Control\Video-Section (However this drivers are not shown in the hardware panel of the os). We can have admin-rights to one of these computers to test if disabling these drivers would help, but we must not change the configuration so that some software does not work after the tests. Therefore I cannot uninstall any software because I have not the mediums, licenses or knowhow to reinstall those apps. The support of this company however will only begin to work, if I can tell them what the real problem is. Thats why we search for a way to disable these mirror-drivers (or a hint to solve the dx problem if we are on a false trace)

    Read the article

  • Linux software Raid 10 no superblock

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

    Read the article

  • how to setup kismet.conf on Ubuntu

    - by Registered User
    I installed Kismet on my Ubuntu 10.04 machine as apt-get install kismet every thing seems to work fine. but when I launch it I see following error kismet Launching kismet_server: //usr/bin/kismet_server Suid priv-dropping disabled. This may not be secure. No specific sources given to be enabled, all will be enabled. Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng) Enabling channel hopping. Enabling channel splitting. NOTICE: Disabling channel hopping, no enabled sources are able to change channel. Source 0 (addme): Opening none source interface none... FATAL: Please configure at least one packet source. Kismet will not function if no packet sources are defined in kismet.conf or on the command line. Please read the README for more information about configuring Kismet. Kismet exiting. Done. I followed this guide http://www.ubuntugeek.com/kismet-an-802-11-wireless-network-detector-sniffer-and-intrusion-detection-system.html#more-1776 how ever in kismet.conf I am not clear with following line source=none,none,addme as to what should I change this to. lspci -vnn shows 0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000c] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f69fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, ssb and iwconfig shows lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"WIKUCD" Mode:Managed Frequency:2.462 GHz Access Point: <00:43:92:21:H5:09> Bit Rate=11 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Managementmode:All packets received Link Quality=1/5 Signal level=-81 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:169 Invalid misc:0 Missed beacon:0 So what should I be putting in place of source=none,none,addme with output I mentioned above ?

    Read the article

  • Why do I sometimes get 'sh: $'\302\211 ... ': command not found' in xterm/sh?

    - by amn
    Sometimes when I simply type a valid command like 'find ...', or anything really, I get back the following, which is completely unexpected and confusing (... is command name I type): sh: $'\302\211...': command not found There is some corruption going on I think. I don't use color in my prompt, I am using the Bash shell in POSIX mode as sh (chsh to /bin/sh and so on - $SHELL is sh). What is going on and why does this keep happening? Anything I can debug? I think this is more of an xterm issue than sh, or at least a combination of the two. Files, for context: My /etc/profile, as distributed with Arch Linux x86-64: # /etc/profile #Set our umask umask 022 # Set our default path PATH="/usr/local/sbin:/usr/local/bin:/usr/bin" export PATH # Load profiles from /etc/profile.d if test -d /etc/profile.d/; then for profile in /etc/profile.d/*.sh; do test -r "$profile" && . "$profile" done unset profile fi # Source global bash config if test "$PS1" && test "$BASH" && test -r /etc/bash.bashrc; then . /etc/bash.bashrc fi # Termcap is outdated, old, and crusty, kill it. unset TERMCAP # Man is much better than us at figuring this out unset MANPATH My /etc/shrc, which I created as a way to have sh parse some file on startup, when non-login shell. This is achieved using ENV variable set in /etc/environment with the line ENV=/etc/shrc: PS1='\u@\H \w \$ ' alias ls='ls -F --color' alias grep='grep -i --color' [ -f ~/.shrc ] && . ~/.shrc My ~/.profile, I am launching X when logging in through first virtual tty: [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec xinit -- -dpi 111 My ~/.xinitc, as you can see I am using the system as a Virtual Box guest: xrdb -merge ~/.Xresources VBoxClient-all awesome & exec xterm And finally, my ~/.Xresources, no fancy stuff here I guess: *faceName: Inconsolata *faceSize: 10 xterm*VT100*translations: #override <Btn1Up>: select-end(PRIMARY, CLIPBOARD, CUT_BUFFER0) xterm*colorBDMode: true xterm*colorBD: #ff8000 xterm*cursorColor: S_red Since ~/.profile references among other things /etc/bash.bashrc, here is its content: # # /etc/bash.bashrc # # If not running interactively, don't do anything [[ $- != *i* ]] && return PS1='[\u@\h \W]\$ ' PS2='> ' PS3='> ' PS4='+ ' case ${TERM} in xterm*|rxvt*|Eterm|aterm|kterm|gnome*) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;%s@%s:%s\007" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; screen) PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033_%s@%s:%s\033\\" "${USER}" "${HOSTNAME%%.*}" "${PWD/#$HOME/~}"' ;; esac [ -r /usr/share/bash-completion/bash_completion ] && . /usr/share/bash-completion/bash_completion I have no idea what that case statement does, by the way, it does look a bit suspicious though, but then again, who am I to know.

    Read the article

  • Windows Server 2003 Standard R2 CD 1 cannot boot: freeze at No Emulation

    - by TGP1994
    Hi everyone. I've been interested in the Windows Server line of OSes, so since I apply for DreamSpark, I thought I'd go download it and try it. I just so happened to have an old desktop that I was using awhile ago for Windows XP, so I imaged the drive in preparation for it to be overwritten with the new OS. (This system has an Asus A7V8X-X motherboard, an AMD Athlon XP 2800+ processor, and 1GB of RAM.) I tried burning the first disk image on my newer desktop computer, running Windows XP, although the CD burner consistently failed at a particular track area from cd to cd, so it seemed like the burner was toast there. Fortunately, I had a laptop, so I transferred the images over to that, then burned the first disc there. First time around went great, and the burning program reported no errors. I then took the CD over to the computer that I was intending to install Server onto, set the BIOS to boot from the CD drive, then I booted it up. Like normal, after the POST, it printed "Boot from ATAPI CD-Rom: No Emulation", which I was used to seeing with bootable cds. I waited for the "Press any key to continue..." message that I had become so familiar with in windows discs, although I saw none. The computer sat there for about 5 seconds with the cd spinning, then it spun down like it was done reading it. Nothing else happened. No response from the keyboard. I tried again, same result. I then downloaded IMGBurn, and I put the burned cd into the laptop that burned it originally. I also downloaded a fresh image from the dreamspark site. I ran a verify session, and everything checked out. I later tried getting various DOS startup discs, then I tried booting the winnt binary, which supposedly initiates the installation process. Either the shells reported that not enough memory was available (since they would be running in low memory mode), or FreeDOS in particular would report Illegal instructions right away. Is the image corrupt at dreamspark, or am I doing something wrong?

    Read the article

  • How to circumvent ISP Limiting "Unknown" traffic - (SSH)Proxy, VPN

    - by connery
    I am having issues with using a proxy/VPN, with my current ISP (Comenersol, Spain). From my point of view they limit traffic by protocol or by traffic they "know" and "dont know". I'll explain my findings so far below. Internet connection in Spain: ~400-420KByte/sec (speedtest.net) OpenVPN Server in Sweden(pfsense): 100/100Mbit. LZO Compression. TCP. Tun. Aes128 Squid Proxy server in Sweden (pfsense): 100/100 (same box as the vpn server). Plain, no encryption. Runs in stealth mode to hide the use of proxy. NOT running OpenVPN or Squid Proxy, this is my findings: When I download a file from my pfsense box in Sweden, I get maximum speed When I run speedtest.net and choose any european server (including Swedish), I get max speed When I download a torrent (with non default port above 10K), I get limited to ~100KByte/sec. Encryption is turned off If I download something through https, I get max speed Running either Squid Proxy or VPN, this is my findings When I download a file from my pfsense box in Sweden, I get ~100KByte/sec When I run speedtest.net and choose any european server (including Swedish and Spanish), I get ~100Kbyte/sec When I download a torrent, I get same limitation ~100KByte/sec When I download something through https, I get ~100KByte/sec I verify the speeds above with speedtest.net measure, firefox measure in addition to having bmon running in terminal in the background. This way I am certain that the speeds I get presented, are in fact correct. If I connect through a different ISP with VPN or Squid Proxy, I get better speeds (400KByte/sec ++) In short: Whenever I tunnel my traffic through Sweden, my SPanish ISP throttles the traffic. I thought tunneling it through Squid would solve the issue, since I then would no longer hide my traffic through encryption. This does not seem to be the case. Wget and fetch gives same result. I did not try 'nc', but I assume this would give the same result. Does anyone know how to circumvent this issue? I would very much like to be able to get full speed with Swedish ip, as this would make me able to stream TV at higher quality than today. 100KByte/sec just does not cut it quality wise. Thanks for reading. Looking forward for your help.

    Read the article

  • High CPU usage - symptoms moving from server to server after bouncing

    - by grt3kl
    First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

    Read the article

  • Windows 7 & Virtual PC and Internet (gateway) problems on host PC

    - by Mufasa
    I upgraded to Windows 7 on a PC that is a few years old. The CPU was one revision away from having Hyper-V on it. So, I had to install Microsoft Virtual PC 2007 (v6.0.156.0) to run full XP instances instead of the seamless XP virtualization that is advertised so much. That's fine though; the 'older' version is useful since I use it to run different versions of the whole XP/IE stack for testing. (I'm a web developer.) ...And for the one 16-bit application we still use at the office for scheduling. * sigh * The virtual instances work fine, including networking. My issue is that after a reboot or coming out of sleep mode, my host Windows 7 won't connect to the Internet. It will connect to the local network fine. If I disable the "Virtual Machine Network Services" item (I'll call "VMNS" from here on) in the LAN Connection properties box, it starts working. But than the Virtual PC instances lose their network connectivity. If I re-enable VMNS again in the same instance, everything works (Internet on host and in the virtualized instances). But after the next reboot/sleep cycle this starts over. The route table gave me a clue though. When doing a cycle w/ VMNS enabled: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 On-link 10.0.3.51 20 0.0.0.0 0.0.0.0 10.0.10.10 10.0.3.51 276 ... After VMNS is disabled, the first route goes away. I assume that is for VMNS to intercept virtualized instance's network connections and forward them correctly? Just a guess though. More info: I checked my Firewall settings and Services (because I'm sort of a control nazi and turn off a lot) but couldn't find anything that made sense and if turned on changed anything. So it might be something there I'm missing, but I don't know what. My current hacked solution: So, I figured I'd mess with the routes myself to see if that helped, it did. If I run a route delete 0.0.0.0 on the universal (0.0.0.0) gateway routes, and add back in just the 2nd line with route add 0.0.0.0 mask 0.0.0.0 10.0.10.10--the one that points to my actual gateway (10.0.10.10)--then I don't have to mess with the disable/enable cycle of VMNS, and everything works. Running those two commands is faster then bringing up connection options and disabling and re-enabling VMNS, but I still don't want to have use that hack script every boot either. (Oh, and I also tried messing with hard-coding TCP/IP settings in my network adapter, including setting high metrics, etc., but that didn't help either.) Any suggestions on the right way to fix this?

    Read the article

  • APC PHP cache size does not exceed 32MB, even though settings allow for more

    - by hardy101
    I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

    Read the article

  • Can Remote Desktop Services be deployed and administered by PowerShell alone, without a Domain in WIndows Server 2012 and 2012 R2?

    - by Warren P
    Windows Server 2008 R2 allowed deployment of Terminal Server (Remote Desktop Services) without a domain, and without any insistence on domains. This was very useful, especially for standalone virtual or cloud deployments of a server that is managed remotely for a remote client who has no need or desire for any ActiveDirectory or Domain features. This has become steadily more and more difficult as Microsoft restricts its technologies further and further in each Windows release. With Windows Server 2012, configuring licensing for Remote Desktop Services, is more difficult when not on a domain, but possible still. With Windows Server 2012 R2 (at least in the preview) the barriers are now severe: The Add/Remove Roles and Features wizard in Windows Server 2012 R2 has a special RDS deployment mode that has a rule that says if you aren't on a domain you can't deploy. It tells you to create or join a domain first. This of course comes in direct conflict with the fact that an Active Directory domain controller should not be the same machine as a terminal server machine. So Microsoft's technology is not such much a Cloud Operating System as a Cluster of Unwanted Nodes, needed to support the one machine I actually WANT to deploy. This is gross, and so I am trying to find a workaround. However if you skip that wizard and just go check the checkboxes in the main Roles/Features wizard, you can deploy the features, but the UI is not there to configure them, and when you go back to the RDS configuration page on the roles wizard, you get a message saying you can not administer your Remote Desktop Services system when you are logged in as a Local-Computer Administrator, because although you have all admin priveleges you could have (in your workgroup based system), the RDS configuration UI will not accept those credentials and let you continue. My question in brief is, can I still somehow, obtain the following end result: I need to allow 10-20 users per system to have an RDS (TS) session. I do not need any of the fancy pants RDS options, unless Microsoft somehow depends on those features being present. I believe I need the "RDS Session Host" as this is the guts of "Terminal Server". Microsoft says it is "full Windows desktop for Remote Desktop Services client. I need to configure licensing so that the Grace Period does not expire leaving my RDS non functional, so this probably means I need a way to configure TS CALs. If all of the above could technically be done with the judicious use of the PowerShell, I am prepared to even consider developing all the PowerShell scripts I would need to do the above. I'm not asking someone to write that for me. What I'm asking is, does anyone know if there is a technical impediment to what I want to do above, other than the deliberate crippling of the 2012 R2 UI for Workgroup users? Would the underlying technologies all still work if I manipulate and control them from a PowerShell script? Obviously a 1 word Yes or No answer isn't that useful to anyone, so the question is really, yes or no, and why? In the case the answer is Yes, then how.

    Read the article

  • Well....a ghost lives in my server...

    - by tsgiannis
    Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

    Read the article

  • Network switching issues with MacOS 10.7?

    - by Denis
    I'm having a wired problem and hope somebody can tip me, what way should I dig to. I'm using MacBookPro with Lion 10.7.3 both at my working place & at home. At working place, we have a domain-based network with 802.1x authorization (more than 400 computers) and to connect it I'm using Ethernet cable. IP range is 10.10.2.*. All network settings are setup automatically by DHCP. Also, in settings, I have Network Account Server setup in the User&Groups Settings for my work Domain server - and it is available only from corporate network. At home, I have an ADSL router, that shares Internet connection by WiFi in NAT mode. I'm using WiFi to connect it. Router gives out addresses from 192.168.1.* range and all settings are also set up by router's DHCP. So, my problem is the following. When I come back home from the office, I open my MacBook and AirPort automatically connects my WiFi network. After this, for about 1 minute I'm able to browse sites & ping hosts successfully. But after this minute, network connection is broken down. All pings return time-out. trace route to google.com stops on 192.168.1.1 (which is my router). This lasts for 3-4 minutes. After that network connection is automatically repaired and all pings go smoothly again. At the same time, when my MacBook return timeouts, I can successfully ping any host from my wife's MacBook - so this doesn't look like router issue. When I come to the office, I don't have any issues and Internet connection is available & stable moments after ethernet cable plugged in. Do anybody has any clues about this? What should I monitor & what settings look for resolving this issue? Please, ask, what additional information should I provide. Hoping for good advice & thanks in advance!

    Read the article

  • seaudit report detail

    - by user1014130
    I've just started using selinux in the last 6 months and am getting to grips with it. However, using sealert on a new CENTOS 6 server, Im not getting the level of detail I was with CENTOS 5. To illustrate: Running sealert -a /var/log/audit/audit.log On CENTOS 5 I get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Additional Information: Source Context root:system_r:postfix_postdrop_t Target Context system_u:object_r:httpd_log_t Target Objects /var/log/httpd/error_log [ file ] Source postdrop Source Path /usr/sbin/postdrop Port Host Source RPM Packages postfix-2.3.3-2.1.el5_2 Target RPM Packages Policy RPM selinux-policy-2.4.6-279.el5_5.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name server109-228-26-144.live-servers.net Platform Linux server109-228-26-144.live-servers.net 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:04:48 EDT 2010 x86_64 x86_64 Alert Count 1 First Seen Wed Jun 13 11:43:55 2012 Last Seen Wed Jun 13 11:43:55 2012 but on CENTOS 6 I just get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Im running exactly the same command. Does anyone have any idea why Im not getting the "Additional information" that I do with CENTOS 5? Thanks in advance Dylan

    Read the article

  • Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

    Read the article

  • Network Services disabled (not starting) on Windows XP

    - by Rickesh John
    I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

    Read the article

  • Two-Hop SSH connection with two separate public keys

    - by yigit
    We have the following ssh hop setup: localhost -> hub -> server hubuser@hub accepts the public key for localuser@localhost. serveruser@server accepts the public key for hubuser@hub. So we are issuing ssh -t hubuser@hub ssh serveruser@server for connecting to server. The problem with this setup is we can not scp directly to the server. I tried creating .ssh/config file like this: Host server user serveruser port 22 hostname server ProxyCommand ssh -q hubuser@hub 'nc %h %p' But I am not able to connect (yigit is localuser): $ ssh serveruser@server -v OpenSSH_6.1p1, OpenSSL 1.0.1c 10 May 2012 debug1: Reading configuration data /home/yigit/.ssh/config debug1: /home/yigit/.ssh/config line 19: Applying options for server debug1: Reading configuration data /etc/ssh/ssh_config debug1: Executing proxy command: exec ssh -q hubuser@hub 'nc server 22' debug1: permanently_drop_suid: 1000 debug1: identity file /home/yigit/.ssh/id_rsa type 1000 debug1: identity file /home/yigit/.ssh/id_rsa-cert type -1 debug1: identity file /home/yigit/.ssh/id_dsa type -1 debug1: identity file /home/yigit/.ssh/id_dsa-cert type -1 debug1: identity file /home/yigit/.ssh/id_ecdsa type -1 debug1: identity file /home/yigit/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH_5* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA cb:ee:1f:78:82:1e:b4:39:c6:67:6f:4d:b4:01:f2:9f debug1: Host 'server' is known and matches the ECDSA host key. debug1: Found key in /home/yigit/.ssh/known_hosts:33 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/yigit/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/yigit/.ssh/id_dsa debug1: Trying private key: /home/yigit/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). Notice that it is trying to use the public key localuser@localhost for authenticating on server and fails since it is not the right one. Is it possible to modify the ProxyCommand so that the key for hubuser@hub is used for authenticating on server?

    Read the article

  • git private server error: "Permission denied (publickey)."

    - by goddfree
    I followed the instructions here in order to set up a private git server on my Amazon EC2 instance. However, I am having problems when trying to SSH into the git account. Specifically, I get the error "Permission denied (publickey)." Here are the permissions of my files/folders on the EC2 server: drwx------ 4 git git 4096 Aug 13 19:52 /home/git/ drwx------ 2 git git 4096 Aug 13 19:52 /home/git/.ssh -rw------- 1 git git 400 Aug 13 19:51 /home/git/.ssh/authorized_keys Here are the permissions of my files/folders on my own computer: drwx------ 5 CYT staff 170 Aug 13 14:51 .ssh -rw------- 1 CYT staff 1679 Aug 13 13:53 .ssh/id_rsa -rw-r--r-- 1 CYT staff 400 Aug 13 13:53 .ssh/id_rsa.pub -rw-r--r-- 1 CYT staff 1585 Aug 13 13:53 .ssh/known_hosts When checking my logs in /var/log/secure, I used to get the following error message every time I tried to SSH: Authentication refused: bad ownership or modes for file /home/git/.ssh/authorized_keys However, after making a few permission changes, I no longer get this error message. Despite this, I am still getting the "Permission denied (publickey)." message every time I try to SSH. The command I am using to SSH is ssh -T git@my-ip. Here is the full log I get when I run ssh -vT [email protected]: OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: Connecting to my-ip [my-ip] port 22. debug1: Connection established. debug1: identity file /Users/CYT/.ssh/id_rsa type -1 debug1: identity file /Users/CYT/.ssh/id_rsa-cert type -1 debug1: identity file /Users/CYT/.ssh/id_dsa type -1 debug1: identity file /Users/CYT/.ssh/id_dsa-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.2 debug1: match: OpenSSH_6.2 pat OpenSSH* debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr [email protected] none debug1: kex: client->server aes128-ctr [email protected] none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 08:ad:8a:bc:ab:4d:5f:73:24:b2:78:69:46:1a:a5:5a debug1: Host 'my-ip' is known and matches the RSA host key. debug1: Found key in /Users/CYT/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /Users/CYT/.ssh/id_rsa debug1: Trying private key: /Users/CYT/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). I have spent a few hours going through threads on various sites, including SO and SF, looking for a solution. It seems that the permissions for my files are all okay, but I just can't figure out the problem. Any help would be greatly appreciated. Edit: EEAA: Here are the outputs you requested: $ getent passwd git git:x:503:504::/home/git:/bin/bash $ grep ssh ~git/.ssh/authorized_keys | wc -l grep: /home/git/.ssh/authorized_keys: Permission denied 0

    Read the article

  • turn off disable the performance cache

    - by jessie
    OK I run a streaming website and my CMS is giving me an error when uploading videos "Failed To Find Flength File" ok so I did some research. The answer I got from the coder was below. I did do all that, but the only thing I could not do is turn off what he refers to as performance cache, talked about in the last sentence... I am on a Cent OS Assuming the script is set up properly, you are probably dealing with some kind of write-caching. Some servers perform write-caching which prevents writing out the flength file or the entire CGITemp file during the upload. The flength file or the CGITemp file do not actually hit the disk until the upload is complete, making it worthless for reporting on progress during the upload. This may be fixed using a .htaccess file assuming your host supports them. Here is a link to an excellent tutorial on using .htaccess files. I strongly recommend giving it a quick read before attempting to install your own .htaccess file. 1. A mod_security module for Apache. To fix it just create a file called .htaccess (that's a period followed by "htaccess") and put the following lines in that file. Upload the file into the directory where the Uber-Uploader CGI ".pl" scripts resides, or in some directory above it (like your server's DOCUMENT_ROOT, i.e. the top-level of your webspace). htaccess files must be uploaded as ASCII mode, not BINARY. You may need to CHMOD the htaccess file to 644 or (RW-R--R--). # Turn off mod_security filtering. SecFilterEngine Off # The below probably isn't needed, # but better safe than sorry. SecFilterScanPOST Off If the above method does not work, try putting the following lines into the file SetEnvIfNoCase Content-Type \ "^multipart/form-data;" "MODSEC_NOPOSTBUFFERING=Do not buffer file uploads" mod_gzip_on No 2. "Performance Cache" enabled on OS X SERVER. If you're running OS X Server and the progress bar isn't working, it could be because of "performance caching." Apparently if ANY of your hosted sites are using performance caching, then by default, all sites (domains) will attempt to. The fix then is to disable the performance cache on all hosted sites.

    Read the article

  • Windows 8 disk errors

    - by wrongusername
    So yesterday, I forcibly restarted my Windows 8 PC. VMWare Workstation was having some trouble with the guest Linux Mint OS. It wasn't responding for some time, so I tried suspending it September 28th or perhaps even before. It wouldn't suspend -- I forgot what the window looked like, but all options in the power menu were disabled (i.e. "Shutdown," "Power Off," and options like that were all disabled). I eventually killed the VMWare application through Task Manager, though I was too lazy to hunt down the running virtual machine itself, and decided to kill it by just shutting down my PC entirely. The PC wouldn't shut down for quite some time after the monitor went blank, so I did a cold reset by holding the power button. I then powered it on again and Windows briefly gave me some message like "Search for KERNEL_STACK_INPAGE_ERROR." Windows then started diagnosing some problems and gave me the message, "Repairing disk errors. This might take over an hour to complete." That was yesterday night, and I went to sleep without waiting for it to finish. This morning, it said that the repair failed, and that the log was at C:\windows\system32\LogFiles\srt\srtTrail.txt (as I remember it -- I don't have the exact path I wrote down right now). It gave me some other options to troubleshoot, such as resetting Windows (files and settings still intact, but programs not installed through the app store will be erased). That didn't work (no error message given, I was just told it didn't work). I tried rebooting in safe mode, the same diagnosis process begins, except that this time it doesn't bother with the automatic repairs again. So I tried using the command prompt to try to see if my files are at least still there. I was on the X drive, and I couldn't cd to the C drive. I couldn't find my folder under Users (of course?), and couldn't find the srt folder under LogFiles either. I am not sure what to try next. I have backed up everything, but to the cloud, so if absolutely necessary I can start off with a fresh copy of Windows and restore all my data, though it would be a hassle. Any thoughts on what might be wrong or what I can try? My computer was purchased just this June, so the hard drive should still be pretty new.

    Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >