Search Results

Search found 10782 results on 432 pages for 'rails models'.

Page 397/432 | < Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >

• Wake on LAN Problem

  - by Caley Woods

  I'm working to get wake on lan (wol) working so that we can do some power management at my workplace. I've enabled WOL on a test laptop running Win 7 x64 and put it to sleep and hibernate both with no luck. I'm using a 3rd party utility and I've ran wireshark on the test laptop with it booted up and I can see the WOL packets coming in and the machine refuses to wake from sleep or hibernate. I thought maybe it was the computer I was using so I had another Win 7 x64 laptop nearby and I tried it, same scenario. We're in a cisco environment and I believe I gotten all the pieces in place since I'm seeing the WOL packets come through. I've tested two machines on the same subnet to eliminate the possibility of a misconfiguration on the switch, this also has the same behavior. The laptop models are a Compaq 6510b and 6730b. Is there something I'm missing? I'm trying this across UDP port 50200 since that's the port the actual management system will use after I get it working.

  Read the article

• Debian Bluetooth headphones not working

  - by cYrus

  Hardware Headphones Bluetooth dongle Maybe not exactly these models. Setup I tried to follow some guides, here's what I've done so far: Install software: sudo apt-get install bluez-utils bluez-alsa Reboot (just to be sure): $ dmesg | grep -i bluetooth [ 20.268212] Bluetooth: Core ver 2.16 [ 20.268230] Bluetooth: HCI device and connection manager initialized [ 20.268233] Bluetooth: HCI socket layer initialized [ 20.268235] Bluetooth: L2CAP socket layer initialized [ 20.268239] Bluetooth: SCO socket layer initialized [ 20.284685] Bluetooth: RFCOMM TTY layer initialized [ 20.284692] Bluetooth: RFCOMM socket layer initialized [ 20.284693] Bluetooth: RFCOMM ver 1.11 [ 20.335375] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.335378] Bluetooth: BNEP filters: protocol multicast The deamon is running: $ /etc/init.d/bluetooth status [ ok ] bluetooth is running. Plug the dongle: $ dmesg | tail [...] [23108.352034] usb 5-2: new full-speed USB device number 2 using ohci_hcd [23108.571131] usb 5-2: New USB device found, idVendor=0a12, idProduct=0001 [23108.571136] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [23108.629042] usbcore: registered new interface driver btusb Put the headphones in pairing mode, and try scanning: $ hcitool scan Scanning ... Found nothing. What's next? What should I try? I'll update this answer as soon as you provide me hints.

  Read the article

• Windows 7 starts getting sluggish over a few days

  - by munrobasher

  Myself and the other developer are running Windows 7 Enterprise 64 bit with 8GB RAM on different Gigabyte motherboards with Quad core Intel CPUs. Most of the time, it runs like a dream. We use VMware workstation a lot (hence the 8GB) and that works well. Except... now and then, after the PCs have been on for a few days, the whole system starts getting really sluggish doing certain tasks. The other's developer's system is far worse than mine with it taking up to a minute to launch IE. Today, mine has gone sluggish but nowhere near as bad. For example, normally when I click on a new tab in IE, it's instant. Today, there's an obvious delay. Right-clicking in this window to trigger iSpell is normally instant, right now it takes about five seconds. I've got resource monitor open on my second monitor and when I did that right-click, there was no obvious peak in CPU, disk or memory. A reboot does fix it so it does sound like a resource issue but haven't a clue what might be to blame. The two computers have similarities (same spec) but also differences (like motherboard, RAM & CPU models). So I guess the question is, any pointers on diagnosing why a PC is sluggish? What could cause such a right-click slow down in IE for example? It sounds like such a simple operation. NOTE: whilst typing this message alone, it was fine performance wise. I can click around the page no problem but right-click still is noticeable slow. Will reboot over lunch... Cheers, Rob.

  Read the article

• Burners freezing the PC when starting lead write in

  - by steve

  hi guys ,am having trouble with new pioneer dvdr-219l dual layer burners ,have replaced old burners with these dual layer ones . they are sata attached ,have tried img burn, xbox360 cookie burner, dvd decrypter, dvd flick , the burners seem ok burning cd and normal dvds but when trying to burn an iso to dual layer they will both freeze at the lead in write , the pc freezes including alt/delete mouse etc so have to re-boot,have tried uninstalling all burning programs that i have to eliminate conflicts and re-installing 1 at a time to see if that was the problem , still no solution am starting to think that maybe i have a bad sata cable the pc and burners dont seem to talk to each other when trying to burn dual layer ,any suggestions ???? this problem is giving me the shits ,ran microsofts fix it program and it said i had no burners installed that were capable of burning , i have had a look at device manager and the burners are there and when trouble shooted it says they are working ok , have noticed in device manager that the driver for these burners is from B.H.A.corporation file version 8.0.0.5. copyright 2000-2006 and they are not digitally sighned these burners are the latest models so how com the drivers are so old ...help please . steve

  Read the article

• What is the best cloud technology to use for MongoDB/GridFS database servers

  - by Nerian

  We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. GridFS is a module for MongoDB that allows to store large files in de database. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities? Edit: Added meaning of GridFS

  Read the article

• Nginx map module 301 redirecting

  - by Reinier Korth

  I've rebuild my website in Ruby on Rails and now I want to 301 redirect a lot of old urls using Nginx's http://wiki.nginx.org/HttpMapModule For some reason I can't get it to work. It works fine without the rewrite ^ $new permanent; line. Does anyone see what I'm missing? This my nginx.conf: server { server_name example.com; return 301 $scheme://www.example.com$request_uri; } # 301 redirect list map $uri $new { /test123 http://www.example.com/test123; /bla http://www.example.com/bladiebla; } server { server_name www.example.com; rewrite ^ $new permanent; root example/public; location ^~ /assets/ { gzip_static on; expires max; add_header Cache-Control public; } try_files $uri/index.html $uri @unicorn; location @unicorn { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://unicorn-<%= application %>; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }

  Read the article

• Xbox Music ignores Asus FN media keys in Desktop Mode

  - by Ruud Lenders

  I have an Asus PRO64JQ laptop, and I recently upgraded to Windows 8. The FN keys stopped working, so I tried to install default drivers using the CD that came with my laptop. Unfortunately, the CD does not support Windows 8. Asus Support does not help me either. It seems that Asus does not support Windows 8 on my model, since I can't find it in their list of Windows 8 upgradable models. Also, the support page of my laptop does not allow me to select Windows 8 as OS. That's why I'm asking my question here. I fixed (most of) the FN keys by installing the ATKPackage, and I was happy to find out that the media keys (play/pauze, next, previous) works with the Xbox Music app. But the keys only work in the Metro UI. In Desktop Mode, pressing FN+? (play/pause) starts up Windows Media Player. Disabling Windows Media Player through the control panel stops it from popping up, but Xbox Music still only responds to them in the Metro UI. I remember that I had similar problems when I tried to make these media keys to work with iTunes on Windows 7. The fix there was a small iTunes plug-in. So tell me, do you know how to fix my problem? Thanks.

  Read the article

• i7 Windows 7 laptop or Macbook Pro 15" (For making 3D model and Animation)

  - by sppdhs

  Hi everyone, I'm thinking of buying a new laptop as my current one will be 5 years old next year and it currently gives me a blue screen everytime I run a heavy software to make 3D models and animation. Question is: Should I buy Macbook Pro or a Windows 7 laptop? I tried to research and some say that Windows would be better, especially because you can buy a very high spec laptop with cheaper price. While some other say Macbook Pro is the better choice as it can run bootcamp with windows 7 100% performance on every software even though it's a mac. Is this true? Which one is actually better? Btw, the software that I usually use is 3Ds Max, Maya, and ZBrush. To note as well, I have never used a Mac before. I've checked around some stores and budget wise, I'll need around AU$3000+ to buy a Macbook pro, and AU$2000+ to buy a windows laptop. Quite a big difference in price range. Thanks in advance for your help.

  Read the article

• Unable to connect to server after a certain amount of time

  - by Troy

  I am a business FIOS subscriber with 5 static IPs. I have the following network setup: Verizon provided ONT Dlink switch Dell server running Ubuntu 12.04 with iptables enabled and a static IP address. The makes/models of hardware are: FIOS ONT Alcatel-Lucent I-211M-H ONT D-Link D-Link Web Smart Switch DES-1228P Server Dell Optiplex 755 (Ubuntu 12.04 Server) I have iptables running on the server with http, https and ssh ports open. I can connect to a website on the server from an external computer, but after a certain amount of time (mins to hours), I can no longer connect. All I have to do to re-enable connectivity is connect to the server via SSH from a computer INSIDE the network. I don't have to actually login, I just have to establish a connection. I can then access the website externally again. I did some googling and it seems some of verizon's equipment had an ARP bug where the ARP entries would expire after a certain time period, but those issues all seem to be from back in 2009 - 2010. I know the switch has an 'auto learning Mac address' feature, but I'm not sure if that could be the problem or not. Does anyone have any ideas or advice on how I can troubleshoot this? Thanks!

  Read the article

• Is reliability reputation of mechanical keyboards overblown?

  - by Rarst

  A while back I worked up to finally buying mechanical keyboard (~$100 range, "black" switches) and was initially quite content with purchase. However just outside first year (read it - as soon as warranty expired) it started to develop repeat issues (press once, get chain of letter repeated) on multiple keys. It doesn't react to generic cleaning (up to compressed air) and searching Internet shows noticeable amount of people with similar-to-identical issues, spanning years. This makes me severely hesitant to buy another mechanical keyboard, considering: every other keyboard I ever owned, including ultra-cheap crap managed to last longer than that typing experience is nice, but not lifechanging-fan-forever nice for me my choice of mechanical keyboards is severely limited not many brands represented in local market and primarily crazy looking gamer models russian (not to mention russian and ukrainian if possible) layout excludes international ordering price tag for a meek year of use I got our of it is plain demoralizing It is obvious mechanical keyboards have their fans, but shopping around for "best fit" or getting into multiple hundreds price tags is probably not something I am highly interested in. Considering my constraints and bad experience with reliability, is it practical for me to sink more money into buying mechanical keyboard(s) again? In other words - manufacturers are beaming about how crazy reliable mechanical keyboards are. Are active long time users of such keyboards confidently of same opinion?

  Read the article

• _default_ VirtualHost overlap on port 443, the first has precedence

  - by Mohit Jain

  I have two ruby on rails 3 applications running on same server, (ubuntu 10.04), both with SSL. Here is my apache config file: <VirtualHost *:80> ServerName example1.com DocumentRoot /home/me/example1/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example1.com DocumentRoot /home/me/example1/production/current/public SSLEngine on SSLCertificateFile /home/me/example1/production/shared/example1.crt SSLCertificateKeyFile /home/me/example1/production/shared/example1.key SSLCertificateChainFile /home/me/example1/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> <VirtualHost *:80> ServerName example2.com DocumentRoot /home/me/example2/production/current/public </VirtualHost> <VirtualHost *:443> ServerName example2.com DocumentRoot /home/me/example2/production/current/public SSLEngine on SSLCertificateFile /home/me/example2/production/shared/iwanto.crt SSLCertificateKeyFile /home/me/example2/production/shared/iwanto.key SSLCertificateChainFile /home/me/example2/production/shared/gd_bundle.crt SSLProtocol -all +TLSv1 +SSLv3 SSLCipherSuite HIGH:MEDIUM:!aNULL:+SHA1:+MD5:+HIGH:+MEDIUM </VirtualHost> Whats the issue: On restarting my server it gives me some output like this: * Restarting web server apache2 [Sun Jun 17 17:57:49 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence ... waiting [Sun Jun 17 17:57:50 2012] [warn] _default_ VirtualHost overlap on port 443, the first has precedence On googling why this issue is coming I got something like this: You cannot use name based virtual hosts with SSL because the SSL handshake (when the browser accepts the secure Web server's certificate) occurs before the HTTP request, which identifies the appropriate name based virtual host. If you plan to use name-based virtual hosts, remember that they only work with your non-secure Web server. But not able to figure out how to run two ssl application on same server. Can any one help me?

  Read the article

• Wireless keeps shutting off in Windows 7

  - by Nathan Adams

  I have Windows 7 Ultimate 32bit installed on a Dell Latitude XT Tablet and for the life of me I can't figure out this really weird problem. The symptom is that the Wireless will disconnect from the AP and if I tell it to scan again, it says there are no APs in the area. I do have another wireless card in the laptop and if I disable the first one and enable the second, I am able to get onto the wireless however if I want to use the first card again I have to restart. I tried enabling/disabling the device, nothing will kick start the wireless again in the first card without a restart. I even tried different drivers. So, it seems it is random but it does occur more often when there is increased network activity (ie downloading a large file). The laptop doesn't seem to be overheating. I have tried the following: Under "Change Advanced Power Settings" for the current power profile, I set the "Wireless Adapter settings" to "Maximum Performance". Under device manger, I went to the card in question, and went to the advanced tab and set the "Power Saving mode" to "MAX_PSP" Both cards I have seem to exhibit the behavior after awhile. Both models of those cards are: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card Gigabyte GN-WS30N 802.11n mini WLAN Card Has anyone have any ideas or ran into this before?

  Read the article

• How do I determine how future-proof and stable a router is?

  - by Aarthi

  I mentioned in my last question that my wireless router had a bad habit of crashing. After consulting with the Super User chatroom, as well as my sysadmin, I've decided I may as well purchase a new router. However, I'm unsure how to evaluate all these tech specs that get touted about. The two things that seem to be the most important to me are: (1) keeping my router future-proof (as standards evolve and change), and (2) ensuring its stability. Unfortunately, I'm not sure what, exactly, I should be looking for in the tech specs or the item description that can give me a good idea of how stable or future-proof my decide will be. What should I look for? Can I determine stability without having to try the device out myself? Please note: I'm not a battle-hardened power user by any means, so I'll likely be reliant on the given firmware for my router. My last router lasted me like four years, so I mostly just want something that'll cover a 500 sqft apartment in New York with minimal crashing, so that I can watch Hulu in peace. And make Skype calls. If it helps, the router models that I'm currently decided between are this ASUS one and this LinkSys one.

  Read the article

• Nginx/puma rhel unix socket permission error?

  - by Kevin Brown

  When I try to start my puma server, I get the error: /.rvm/gems/ruby-2.1.1/gems/puma-2.9.0/lib/puma/binder.rb:275:in `initialize': Permission denied - connect(2) for "/var/run/nvhbase.sock" (Errno::EACCES) My sites-available/nvhbase.conf file: upstream nvhbase { server unix:/var/run/nvhbase.sock; } server { listen 80 default_server; server_name 207.131.132.219; root /home/vf032500/dev/nvh/public; location / { proxy_pass http://unix:/var/run/nvhbase.sock; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } I don't know a lot about unix sockets and everything works fine using tcp/puma default. My rails app is in my user directory. Is that the problem?? socket is starting in /var/run--I can start in /tmp, but I've heard that's bad practice? Provided I start the server in /tmp, I then can't access it via the server's ip--then what? I'm happy to provide any needed info, I just don't know a whole lot about server/nginx/puma.

  Read the article

• Sending email with exim and external sender address

  - by Tronic

  hi. i have following problem: i want to send emails with an rails webapp. i set up an exim server and when looking into the logs, the sending works, but the emails aren't sent really. i had the same problem with another isp. the sender address is hosted on another mailserver, other isp. i think the problem is, that sending doesn't work because the sener address isn't hosted on the same server. do you have any advice on this? the logs (exim) tell me the following: 2011-01-01 14:38:06 1PZ1eo-0000Ga-38 <= <> R=1PZ1eo-0000GY-1p U=Debian-exim P=local S=1778 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 => [email protected] R=dnslookup T=remote_smtp H=mx1.emailsrvr.com [98.129.184.131] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,O=mx1.emailsrvr.com,OU=GT21850092,OU=See www.geotrust.com/resources/cps (c)08,OU=Domain Control Validated - QuickSSL(R),CN=mx1.emailsrvr.com" 2011-01-01 14:38:08 1PZ1eo-0000Ga-38 Completed [email protected] is the external sender-address! thank you!

  Read the article

• Recommended Smartphone for Reading PDFs [closed]

  - by mika

  This is as much a software than a hardware question. I use a lot of public transport and perhaps the best way to spend your time there is to read while listening to music. Currently I use Nokia E90 and Adobe Reader LE 2.5 (full version). I was wondering if there are any better alternatives? Requirements: at least 640px wide screen, preferably 800px physical size of the LCD display matters, it should be large, but the phone itself should be as small as possible. This favors touchscreen models PDF reader should be of high quality. It should render most PDFs correctly. Other important features include: full screen mode, keyboard controls for Page Down and page change, multiple zoom levels to adjust to the screen, opening recent documents at the last page read Downsides of E90 + Adobe Reader LE Phone is large compared to the display It is hard to read the display at sunlight Adobe Reader crashes the phone regularly, zoom could have more levels, doesn't remember last page EDIT: Switched to iPhone and GoodReader. Smaller physical screen width compared to E90 is a disimprovement, but other than that I'm happy. GoodReader is the highest quality smartphone PDF reader I've seen so far.

  Read the article

• Protect all XML-RPC calls with HTTP basic auth but one

  - by bodom_lx

  I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

  Read the article

• Protect all XML-RPC calls with HTTP basic auth but one

  - by bodom_lx

  I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

  Read the article

• Choosing gateway router/firewall for small datacenter network [closed]

  - by rvs

  I'm choosing a gateway router/firewall for small internal network for medium-sized web service. Currently there are 5 servers in internal network, up to 50 http(s) requests/second, up to 1000 simultaneous connections, uplink is 100 Mbit. So, network is relatively small and not very busy and we don't like to buy some pricey monster like cisco or jupiper for this site. Instead we'd like to buy two affordable devices (one for spare), which can handle our workload now and some time in future (it might be up to 2x more in 1 year). I had some experience with Sonicwall NSA, but it seems to be too complex for this site (we don't need most of its features) and even too pricey when buying two of them. So, after some research I've come up with following options: Netgear Prosecure UTM Series (probably UTM25) Zyxel ZyWall Series (USG100 or USG200) Sonicwall TZ 210 Is this a good idea? All of the above seems to be more office products, not datacenter ones. Or we should stick with Sonicwall NSA? Does anyone have any hands-on experience with this models? Maybe some other advices? Thanks.

  Read the article

• Is there an objective way to measure slowness of PC/WINDOWS?

  - by ekms

  We've a lot of users that usually complain about that his PC is "slow". (we use win XP). We usually check startup programs, virus, fragmentation, disk health and common problems that causes slowness (Symantec AV drops disk to 1mb/s , or a seagate HD firmware error in certain models), but in those cases the slowness is pretty evident. In other hand, the most common is the user complaining about his pc but for us looks OK, even in 6 years old desktops. People sometimes even complains about his new quad core desktops speed!!! So, we are asking if there's a way to OBJECTIVELY check that a computer didn't dropped its performance, compared with similar ones o previous measures, specially for work use (I don't think that 3dmark benchmark o similar may help). The only thing that I found that was useful is HDTune, but it only check hard disk performance. Basically, what we want is something that enable us to say to our users "see? your PC is as slow as was three years ago! stop complaining! Is all in your head!"

  Read the article

• Fixed ruby/mysql connection with new libmysql.dll, and broke Apache in the process

  - by jmtoporek

  Ok so bit of background - all my development has been on a local Windows 7 machine. I had Apache with PHP/MySQL running with no issues. Been using ruby (1.9.3 and latest rails release 3.2.9) with built in webrick server, but had a devil of a time connecting to mysql. Did some research, updated my libmysql.dll file in c:/ruby/bin and it worked! Very happy... except now Apache stopped working. In my attempt to resolve the issue I found an older copy of libmysql.dll, renamed the new file, copied the old file back to c:ruby/bin and apache works, ruby does not. So I can take this ass backwards approach but obviously this seems pretty stupid. I was surprised that Apache was using the dll file in ruby/bin folder. I presume this is related to path variables perhaps? I guess I was hoping someone could direct me as to how I can use one dll file for apache and another for ruby. Or if you have some other smarter approach - I've smart enough to follow directions to install apache from scratch and enable php on windows as well as ubuntu, but I'm not much of a sys admin, just a semi competent web developer.

  Read the article

• Ubuntu 10.04 on virtualbox gives error: Target filesystem doesn't have /sbin/init \ No init found. Try passing init= bootarg

  - by Philip

  I'm a linux newbie and the only reason I have it installed is so I can stop having Windows incompatibility issues with Ruby on Rails. Having said that, it sure has been nice, and much faster, and I don't think I'll be doing any Winrails stuff anytime soon. So I created a virtualmachine using virtualbox and have had ubuntu on it for the last 3 weeks. Recently ubuntu asked if it could update a few things, I clicked 'ok'. Now it won't boot and I get this error: *mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory ... Target filesystem doesn't have /sbin/init. No init found. Try passing init= bootarg BusyBox v1.13.3... (initramfs) _ * So I cruised the forums and there are a variety of solutions, but they all have to do with booting from the live cd. (which I assume is the ISO image I used to install ubuntu in the first place). But when I boot from that CD, it just hangs on the ubuntu screen, and the little dots keep cycling white to red, but it hung there for an hour so I think it was stuck. Not sure what I can do; can I do anything from the busybox shell (or whatever that is) to fix things? The thing is, it took about 10 hours to get everything the way I needed with all the gems and whatnot. And I didn't really write down what I tweaked, and I'm middle aged, so all that information has leaked out by now and I don't want to do it again. I'd really like to repair my existing install. One question you might have is, is there something wrong with the ISO? I don't think so, because I made a new virtual machine and used that same iso file to install a fresh ubuntu. Any help much appreciated. Phil

  Read the article

• 'Future-proof' Live Audio Capture & Broadcast [migrated]

  - by maxpowers

  I'm looking to implement some live audio broadcasting functionality within a Ruby on Rails site for a client and was hoping I could get some input from people who have tackled this type of thing before. Essentially what I need to do is capture and record a user's audio (via microhpone, line in, etc), then stream that to 1,000+ listeners with very little latency, like sub 2 second if possible. So it looks like we've got 3 parts: Web-based audio capture (likely with Flash or JS) Server to accept audio feed and stream to listeners (likely Icecast or Wowza) Actual audio player (maybe HTML5 w/ Flash as a fallback? Maybe this jPlayer fork) Does RTMP makes sense here? Or maybe HTTP? What's the most 'future-proof' way to make this happen? Building with mobile in mind, but still want to be able stream to anyone. I've found lots of potentially helpful threads and software but I'm struggling to get an idea of how it all fits together. I'm a front end guy and way out of my comfort zone so if anyone has insights to offer, I'd love to hear them.

  Read the article

• i7-980X at 70% speed

  - by Buxley

  Hi we bought a nice computer to use to solve optimization problems. Intel i7-980X@3,33 GHz with 12 GB of Team Group 1600 MHz DDR3 RAM. When we use Gurobi the computer uses all 12 cores at maximum in the beginning of the solve. However after a while (about 8 hrs) it all cores jump between 65 and 85% When I solve the same models on an i7 930 all cores are at a near 100% level even after longer solution times. We first thought that the Hard disk was the bottleneck since Gurobi writes out nodefiles after the memorylimit is used. However since the new computer have 12 GB of RAM we put the memorylimit to 7 GB so the solver only used the RAM and still with the same performance in the processor. Any ideas about the bottleneck? As I said earlier it works at 100% for the first hours or so . Thanks very much for any answers! Our plan was to overclock it but we can't even get it to work at normal speed yet!

  Read the article

• MongoDB and GrifFS. What are the best storage options in the range of 1 TB?

  - by Nerian

  We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities?

  Read the article

< Previous Page | 393 394 395 396 397 398 399 400 401 402 403 404  | Next Page >