Search Results

Search found 18422 results on 737 pages for 'down town'.

Page 398/737 | < Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >

  • My CPU hits 100°C... Help me!

    - by JamesT
    The safe limit for processors is typically 50°C or so, but I have found that my CPU likes to do up to 100°C. I have got these readings from SpeedFan 4.42. I have a Intel Quad Core unclocked. I am using the standard intel fan with heatsink that came with the prossesor My case is a Cooler Master and I have two fans installed on the case. I took the side off to see if that helped. It lowered the temp be 3C. I don't really want to blow the processor and I don't know how to cool it down.

    Read the article

  • Motherboard dual gfx power question

    - by user33931
    1st, I am software guy. I do not do hardware. So I know to you hardware geeks, this is a dumb question. I just inherited a box with a ASUS P5GZ-MX mother board. I have attempted to install two nVidia PCI video cards. I put a 750w power supply in the system to be sure I have enough power. With no extra video cards, the 3.3 v shows normal. When I put one card in, the 3.3 goes to 3.5-3.6 and flashes red (over voltage) about 30% of the time. When I put the 2nd card in, it goes to 3.73 v and stays red all the time. Any Ideas why the voltage goes up when I add cards instead of going down? More Importantly, is this dangerous to the system?

    Read the article

  • Windows/global setting to allow only SSL when on public Wifi?

    - by hungry
    Rather than going through each of my apps and modifying settings, or tweaking individual browser settings (I use three different browsers) or just being careful not to type non-SSL URLs into the web address bar, is there a solution at the Windows level that will prevent anything from connecting to the web from my laptop unless it's using SSL? I also have mini apps installed like Gmail checker, etc that connect to the web of their own volition using my usernames, passwords and such, so it goes beyond just web browsers. The reason I'm asking is I want to work securely on the general Internet when on public Wifi (e.g. coffee shops) without a lot of hassle or having to remember everything that needs to be locked down. When I'm back home I want to go back to full access mode using any kind of protocol on the web. If a website doesn't support SSL when I'm out in public then I just don't surf it - that's not a worry to me.

    Read the article

  • Will an SSD help prevent laptop overheating?

    - by alex
    My laptop has a severe overheating problem, even though it's quite new (< 6 month). It's still regularly overheating to the point where it shuts down. This usually happens while playing games but sometimes while watching videos or using Skype video calls for a long time. I'm already keeping it mid-air on a cooling tray with 2 external coolers, but that doesn't seem to help. The only other thing I can think of is installing an SSD instead of the current HDD. I've read up that they generate less heat then hard drives, but can it actually make a serious difference to the heat level of the laptop? If there are any other suggestions, please feel free to comment. The laptop is a Toshiba Satellite L650D-11R.

    Read the article

  • How do I stop the natd log spam on Mac OS X with Internet Sharing?

    - by pukku
    Hi! I have InternetSharing enabled on my Mac (Leopard), so that my iPhone can get access to the internet in a wireless environment. Every second or so, I get the following error sent to system.log: 7/2/09 2:12:33 PM natd[20861] failed to write packet back (No route to host) Sometimes, the error is 7/2/09 2:12:33 PM natd[20861] failed to write packet back (Host is down) Is there some way to either fix the problem that is causing these errors (which I'm guessing is because the iPhone doesn't maintain a wireless connection when not in use) or to prevent them from being logged? Thanks, Ricky

    Read the article

  • Removing BIOS Post Messages

    - by Steve
    I am working on a project where a standard x86 desktop system will boot and run a single program until it is shut down. I would like to remove all the bios post messages so that it looks a little more "finished" and cleaner when it starts up. I was hoping that there might by a standard implementation/terms to know about so I can avoid having to dig through every manual to see if there are options, or get some advice on a standard set of tools I should be using. I was thinking about getting a board that has an image that covers up the post messages until you press a key and trying to customize it to all black, but it's not clear if this is a good direction. I started looking for OEM motherboards but my searches were filled with standard commercial stuff, or seemed to be way to big for my toy project. What is the best way to go about removing all the bios post messages and just having a blank screen or "loading" message until OS loads?

    Read the article

  • Best cloud based IT Systems management services out there?

    - by Ryk
    Our startup organisation is growing fast in 2 different office locations. That brings new challenges and headaches. Our entire company is cloud based, and I am looking for a good product to manage our remote systems. Currently we do not have on-site AD servers, we are using the Windows Azure AD services, so cannot rely on group policies at this stage. I would like to be able to achieve the following: (they are all laptops) Remote Desktop Support Patch management Lock down software on machines (restrict them) Monitor and manage systems Other benefits would be good, but if I can achieve the ones listed above, it will go a long way. We have a combination of Windows 7 pro & Windows 8 & 8.1 machines. I am currently using Windows Intune, but it is really limited. Really just a glorified patch enforcer. Thank you in advance to your help.

    Read the article

  • Log off as local "administrator" user, get blank login screen

    - by Force Flow
    I have an imaged lab environment running Windows 7 and attached to a domain. The local Administrator account is enabled for certain maintenance and prep tasks. Every time I logoff from the local Administrator account, it brings me back to the standard Ctrl+Alt+Del login screen. When I press that combination, all the user controls vanish except for the accessibility button down in the left hand corner. The only way I can seem to escape from this is to tap the power button to initiate a shutdown. Windows is up-to-date, and logging off as any other user operates normally. The "hide last user" local security policy option is enabled. Has anyone seen this phenomenon before and how can I stop this from happening?

    Read the article

  • Monitors blank after restart [closed]

    - by offler
    i need help on the following issue. We have Dell T1650 PCs with 2 nvidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

    Read the article

  • SQL Server 2005 transactional replication break before a configured number of retries

    - by ti2
    We have a SQL Server 2000 Standard database with some tables being replicated (continuous transactional replication) to dozens of SQL Server 2005 Express and MSDE computers. The step 2 of the replication agent job (Run agent) is configured by default to retry every 1 minute for 10 times if some problem ocurr. Because the client machines get shut down at night (they are POS machines), we changed the number of retries to 5760 (4 days), so replication would not be broken at night and would not need to be restarted manually. But the problem is that every other day we have at least one machine with broken replication, with this error: The process could not connect to Subscriber 'POS986'. NOTE: The step was retried the requested number of times (5760) without succeeding. The step failed. It seems that SQL Server is not respecting the number of retries or the interval between retries as we configured. PS: I have restarted the replication job after changing the number of retries from 10 to 5760.

    Read the article

  • Speeding up ping

    - by sam
    We have pretty slow internet which makes working online quite tedious some times the internet is just generally slow, 600ms ping, 0.90mb download. (we are in Londnon, can you beleive). But other times the internet download speed is ok 5-8mb but the ping in 600ms is there a way we can speed this up. Good performance would be 5-10mb 30ms ping at our location, which we sometimes get in the morning. Resetting the router always seem to solve the ping issue for about 10 minutes but then it slows down again, any idea whats governing the ping and if anything can be done to address it ?

    Read the article

  • Release Notes for 5/31/2012

    Here are the notes for this week’s release: Pull Requests We’ve moved the pull request creation UI from a modal dialog to a full page to make room for more context on what you’re sending with your pull request. In this week’s changes, you’ll see the list of commits; look for diffs to appear in the coming weeks. Corrected several issues where the line that had comments associated was not being properly differentiated in the code snippet previews on pull request discussions. Corrected an issue where pull request line comments would not appear to be associated with the proper line of code. Fixed an issue where accepting pull requests was not working properly. Bug Fixes Fixed an issue where code snippets could not be inserted using Opera. Fixed an issue where Internet Explorer displayed an error message when browsing the site using https. Fixed an issue where the CAPTCHA was not displaying properly on the Contact User page. Fixed an issue where paging was not working properly in the “Recent Release in Followed Projects” sections for logged in users. Other Updated the activity stream to no longer auto-load new items when scrolling down. Added an explicit download link at the end of the download countdown in case certain browsers/scenarios don’t automatically start downloading. Have ideas on how to improve CodePlex? Visit our ideas page! Vote for your favorite ideas or submit a new one. Got Twitter? Follow us and keep apprised of the latest releases and service status at @codeplex.

    Read the article

  • I have just upgraded to 13.10 and i can not install any programs

    - by jason malitz
    I upgraded to Ubuntu 13.10 last night and i tried to install empathy chat client and this is what I see after the failed down load installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 397719 files and directories currently installed.) Removing xserver-common-lts-raring ... Removing 'diversion of /usr/lib/xorg/protocol.txt to /usr/lib/xorg/protocol-precise.txt by xserver-common-lts-raring' dpkg-divert: error: rename involves overwriting `/usr/lib/xorg/protocol.txt' with different file `/usr/lib/xorg/protocol-precise.txt', not allowed dpkg: error processing xserver-common-lts-raring (--remove): subprocess installed post-removal script returned error exit status 2 No apport report written because MaxReports is reached already Errors were encountered while processing: xserver-common-lts-raring Error in function: So how do I fix this issue

    Read the article

  • Vmware peaks NFS load every 30 seconds

    - by gtirloni
    We were troubleshooting a performance problem on one of our storage servers and after investigating almost everything in sight we saw that every 30 seconds, Vmware would go from 10k IOPS (NFS) to 30k, 50k, 100k or whatever the server would handle. Most of it were reads. What could cause this raise in NFS operations per second every 30 seconds? The virtual machines are managed by external customers and there isn't much in common between them. While breaking utilization down by filename, we discovered 5-10 virtual machines that contributed more to those peaks but it still doesn't explain why every 30 seconds. There are no other peaks outside that 30 sec period (ie. it stays in an almost constant average). Is there an NFS tweak in Vmware to change that 30 second period? If that's really necessary, we would like to introduce some variation so all that workload isn't dropped all at once. It's causing NFS timeout on the ESX 3.5/4.0 hosts when the storage gets overloaded.

    Read the article

  • How can I convince my boss that ANSI C is inadequate for our new project?

    - by justifiably cowardly
    A few months ago, we started developing an app to control an in-house developed test equipment and record a set of measurements. It should have a simple UI, and would likely require threads due to the continuous recording that must take place. This application will be used for a few years, and shall be maintained by a number of computer science students during this period. Our boss graduated some 30 years ago (not to be taken as an offense; I have more than half that time on my back too) and has mandated that we develop this application in ANSI C. The rationale is that he is the only one that will be around the entire time, and therefore he must be able to understand what we are doing. He also ruled that we should use no abstract data types; he even gave us a list with the name of the global variables (sigh) he wants us to use. I actually tried that approach for a while, but it was really slowing me down to make sure that all pointer operations were safe and all strings had the correct size. Additionally, the number of lines of code that actually related to the problem in hand was a only small fraction of our code base. After a few days, I scrapped the entire thing and started anew using C#. Our boss has already seen the program running and he likes the way it works, but he doesn't know that it's written in another language. Next week the two of us will meet to go over the source code, so that he "will know how to maintain it". I am sort of scared, and I would like to hear from you guys what arguments I could use to support my decision. Cowardly yours,

    Read the article

  • Trouble installing from disk

    - by SuperNatural
    I'm writing this in desperation, Windows is slowly killing me and i need to change my home pc os to Ubuntu 11.04 as soon as possible. I created a USB flash drive to install ubuntu, twice, and both times they failed to begin install on restart of my pc. i read on another forum that you might have to change some boot sequence in BIOS but when pressing F2 to enter it didnt work. After a lot of cursing, I made myself an UBUNTU install cd and booted. To my excitement, it now displayed... try ubuntu and install ubuntu. i clicked install ubuntu which lead me to the preparing to install ubuntu display, i checked download updates while installing and clicked forward. The very next display is ' allocate drive space ' i assume there are meant to be options of drives provided but mine is just a blank box and underneath all the options to create a new partition table, add, change, delete and revert are all greyed out. There is a drop down menu labelled 'device for boot loader installlation' but the only option is /dev/sda. when i click install, a no root file system error comes up telling me to please correct from the partitioning menu. I am extremely frustrated. please!! can anyone help me...

    Read the article

  • Launching multiple applications with a single command/script/shortcut

    - by Bill
    I realized a few days ago that every time I sit down at work, I do a few things after unlocking my computer. First, I open up Firefox, then I open up Chrome, then I log in to Digsby. I realized I could probably save repeating this daily by writing a small batch script to open up Firefox and Chrome , but I couldn't figure out how to make it work.. and since the whole effort is to save time I don't want to bash my head around in the windows command prompt to do it. I also tired this in powershell but ran in to a bunch of security nonsense. Is there a way to do this that I am missing? Bonus points if somebody has figured out how to manipulate Digsby via COM , scripting, or python =)

    Read the article

  • upgrading servers, need to keep domain same as before. what are the best practices?

    - by nLL
    Hi, I am upgrading a domain controller/file server from win2003 standard to win2008 r2 standard. We are planing to have a file server and an AD controller. Our old hardware will be scrapped, we want to copy all AD users/computers to new machine and keep current domain name. I never done this before. What are the best practices? Is it better if we get a contractor to do it for us? I guess best way to start is to build new servers, copy data, take old server down and put new server online. My gut says we would need to re-join all computers. Is that correct? Any input appreciated.

    Read the article

  • Windows 7 very slow after restart, but fine after complete shutdown?

    - by lkm
    I have a Dell pc running Windows 7 with the Intel i3 processor. Whenever I restart the computer, the os crawls. For example, I move the mouse and then I see it move on the screen 10 seconds later... Everything runs slowly. This happens only on a restart (it's fine when I turn it on after it has been shut down). Any ideas what is causing this (I haven't installed any new software since buying it). Does it sound like a hardware or software issue?

    Read the article

  • How to progress far enough in a year [on hold]

    - by xCasper
    So I came to a realization the other day, I graduate in a year. I will have completed my four year degree in about two and a half (I went to a school that goes full time year round). Anyway, I want to get a job, as a programmer, when I graduate. The problem is, I feel like I am no where near ready. In the last year I cant say I have made any spectacular projects. I know that my advanced programming courses are coming up, but by the time I take them, I will be graduating in 6 months. Not nearly enough time to really take what I learn, apply it, and create something to show for myself. I want to push myself ahead of the game; mainly because my major is Computer Information Systems, so the focus is not programming. In fact, I only get, 4 programming classes. Before anyone says anything, CIS is the closest to a programming major at my school that I am able to do. So the questions come down to this: 1) What can I do to really step up the speed at which I progress (on my own) 2) Should I be aiming for a certain amount of projects in my "Portfolio." 2a) Should they be big projects? P.S: The language we have used in school in c++, I do take a Java class in the spring, and .net over Summer; if any of that matters for anything.

    Read the article

  • Rotate camera with mouse? [closed]

    - by ezio160324
    Once again, using tutorial 10 at NeHe. I want the code if (keys[VK_RIGHT]) // Is The Right Arrow Being Pressed? { yrot -= 1.5f; // Rotate The Scene To The Left } if (keys[VK_LEFT]) // Is The Left Arrow Being Pressed? { yrot += 1.5f; // Rotate The Scene To The Right } and if (keys[VK_PRIOR]) { lookupdown -= 1.0f; } if (keys[VK_NEXT]) { lookupdown += 1.0f; } to be done with the mouse instead of left/right arrow and Page Up/ Page Down. I tried everything I could think of. Can anyone help? EDIT: I tried using WM_MOUSEMOVE message. I just could not figure it out. EDIT2: I am using pure OpenGL to do this. No window management system or other libs such as GLUT, GLFW, SDL, SFML etc. Just OpenGL. OpenGL and GLEW. EDIT: Issue has been solved.

    Read the article

  • Can't use a network CD-ROM

    - by user53814
    Hi, there! I have a computer with Windows XP and I'm trying to use my local network to use the CD-ROM of my notebook with Windows 7. In windows XP computer with VLC I can open the menu of the DVD but after choose the option for the first chapter the movie window shuts down (but the VLC stays open). With BS-Player when trying to start the first chapter it freezes... Is this possible to fix? Thanks in advance!

    Read the article

  • Move 2TB Win7x64 to 640GB HDD

    - by reedacus25
    Basically I just got a new (refurbished) HP H8-1260t to use for Windows Media Center. The shipping drive is a 2TB Hitachi drive, but I have an older and barely used 640GB WD Caviar Blue 7200RPM drive I would like to move my Windows install to. I have about 750GB of data with over 1TB free left on the drive. Having googled my heart and fingers out, I would think that I can shrink my partition down to the size it is full at now with over 1TB free for a second partition where I can move my media files to further shrink my boot partition so that I can fit a system image smaller than 640GB on that WD drive. I want to have a separate drive for Media and TV Recordings from my boot disk. Does this sound like the easiest method for me? Or am I doing this all wrong. Help appreciated.

    Read the article

  • Attempting to install ubuntu 11.10

    - by Orin
    I installed version 9 sometime ago and since have forgotten the process for partitioning, or the layout is different. I have 5 partitions but only have windows xp installed on the pc in question with that being the one of those 5 partitions which is ntfs 34444 mb its - a 40gig hard-drive. My first question is... is there a way to get a screen shot of the partitioner when I am running the demo session straight from disc... these 5 partitions are fragmenting the other 4ish gig needed to install.. I get an error message which says go back and make sure 1 partition has at least 2.5 gig or so. But I have no idea what I am supposed to set these remaining 4 partitions to in order to proceed.. I have read up on install guides and understand that one must be "/" root and another as swap... but to no avail thus far have the correct combo. A few screen shots will no doubt help you guys answer as I'm baffled as to what specific details to give as each one has various settings on inspection, and I don't really feel like writing it all down manually then posting specs for each one

    Read the article

  • Imap subfolders not shown in list command - perhaps acls misconfiguration

    - by mschenk74
    My goal is to copy the whole folder structure with all mails from one imap account to another. The tool I am using for this is imapcopy (the java based version from code.google.com since the unix/linux tool packaged with debian doesn't support imaps). Now, there is one problem: The tool only copies the top-level folders and not the nested ones. To narrow down the problem I have downloaded the source code of imapcopy and debugged into the code. There I noticed that the folder.list() (which is mapped to the list "%" imap command) returns an empty list. But when I do a getFolder(<subfoldername>) I can access those subfolders. After reading some documentation about the features of imap I think that the problem might be some misconfigured ACLs which prohibit the listing of those folders but allow to read ad write to them. How should I check this ACLs? which tools do I need for this task?

    Read the article

< Previous Page | 394 395 396 397 398 399 400 401 402 403 404 405  | Next Page >