Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 399/1029 | < Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >

• How do I delete hardlinks, symbolic links, junction points, etc please?

  - by jonny

  I could be wrong, but I'm yet to hear a valid argument for the exploitability that these things deliver...outweighing their very dubious / debatable functionality. They seem to me to be marginally handy, but I don't think I have any need for them. I do have a need for security, however. How can I delete their entire functionality permanently from my hard drive, please? Microsoft only has pages on how to create them; which seems almost peculiar to the point of being dubious (at least, to me...) And just a dumb command line question, am I correct in assuming fsutil hardlink list c: will enumerate every single hardlink on that drive? C:\Windows\system32>fsutil hardlink list c: \Windows\System32 Also, how do I delete symbolic links please ;) But I'd just rather have all symbolic linking and recursion-creating stuff removed, if that's possible? C:\Windows\system32>fsutil behavior query symlinkevaluation Local to local symbolic links are enabled. Local to remote symbolic links are enabled. Remote to local symbolic links are disabled. Remote to remote symbolic links are disabled.

  Read the article

• Disaster recovery backup of files/photos for personal use

  - by Renesis

  I'm looking for the best method to store a backup of important files and 5+ years of digital photos that is safe from some type of fire/flood disaster in my home. I'm looking for: Affordable: Less than $100/yr or first-time cost. Reliable: At least a smaller chance of failing than there is of fire or flood Easy for initial backup and to add to, and at least semi-easy to recover. I recently purchased a small home safe for physical vitals. It was inexpensive, solid, and is fire/water safe. If I had a physical copy of the digital files, the safe would work fine for this, but I don't know what to store in it that adequately meets the requirements above. Hard drive - I read that the danger of it not spinning up makes a hard drive a bad choice for this type of storage, although it was my first thought and would definitely be the simplest choice - very easy to take out once a month and add files to. DVDs - Way too much of a hassle for both backup and restore. Tape - No idea on the affordability of this option Online - Given that I have at least 300GB already and ever-increasing megapixels means ever-bigger files, and my ISP upload is about 2Mb at the best, this just doesn't sound like a good option for me, but I could be convinced. Other - Have I missed something? Also, I'm already covered both for sync between computers (Dropbox) and a nightly backup of these files (External HDD). The problem with the nightly backup is obviously that it's always with the computer and in a disaster would be destroyed along with it. Is anyone else doing something similar? Is the HDD as poor of a choice as I read, or is it a feasible option? Maybe two to reduce the likelihood of failure?

  Read the article

• Wildcard SSL and Apache configuration

  - by Nitai

  Hi all, I'm pulling my hard on this configuration, which probably is simply. I have a wildcard ssl certificate which is working. I have the website setup to run on domain.com under SSL. Now, I'm in need to run many subdomains (*.domain.com) on the same server with the same SSL certificate. Shouldn't be that hard, right? Well, I can't get it going. Point is, that the first config is another Tomcat server that serves another site and listens to domain.com and www.domain.com. The other config listens to *.domain.com and pulls the content from another Tomcat server. I already tried this whole setup with mod_rewrite, but simply don't see what I'm doing wrong. Any help very much appreciated. Here is my conf in Apache 2.2: <VirtualHost *:443> SSLEngine on SSLCertificateFile ... SSLCertificateKeyFile ... SSLCertificateChainFile ... ServerName domain.com ServerAlias www.domain.com ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On ProxyPass / ajp://localhost:8010/ ProxyPassReverse / ajp://localhost:8010/ </VirtualHost> <VirtualHost *:443> SSLEngine on SSLCertificateFile ... SSLCertificateKeyFile ... SSLCertificateChainFile ... ServerName domain.com ServerAlias *.domain.com ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPreserveHost On ProxyPass / ajp://localhost:8009/ ProxyPassReverse / ajp://localhost:8009/ </VirtualHost> Thanks.

  Read the article

• Is UPS worthwhile for home equipment?

  - by Jon Skeet

  Over the years, I've had to throw away a quite a few bits of computing equipment (and the like): Several ADSL routers with odd symptoms (losing wireless connections, losing wired connections, DHCP failures, DNS symptoms etc) Two PVRs spontaneously rebooting and corrupting themselves (despite the best efforts of the community to diagnose and help) One external hard disk still claiming to function, but corrupting data One hard disk as part of a NAS raid array "going bad" (as far as the NAS was concerned) (This is in addition to various laptops and printers dying in ways unrelated to this question.) Obviously it'll be impossible to tell for sure from such a small amount of information, but might these be related to power issues? I don't currently have a UPS for any of this equipment. Everything on surge-protected gang sockets, but there's nothing to smooth a power cut. Is home UPS really viable and useful? I know there are some reasonably cheap UPSes on the market, but I don't know how useful they really are. I'm not interested in keeping my home network actually running during a power cut, but I'd like it to power down a bit more gracefully if the current situation is putting my hardware in jeopardy.

  Read the article

• Why Does DreamWeaver CS5 Discriminate between File Extensions, Even After Modding Mime Types!?

  - by Sam

  Hi folks, Even After I forced DreamWeaver CS5 to allow opening of .ast extensions as a MIME type of php5, which DreamWeaver now opens and colors correctly as described here, I still have trouble figuring out why it still discriminates between the two file extensions! Symptoms: External Files & Design View I have a file foo.php which php includes other files (e.g. the php-combined css.php and js.php). Now, when opening foo.php all functions work perfectly: the external (included) php files are all recognised correctly. However, when I change foo.php foo.ast, and open it again, It does not recognise the files extensions anymore in the top bar. Also, I lose the Design / Live View functionality.** When I change foo.ast to foo.php, all works again! Anyone any clues of why there remains a a difference between one and other extension? Note1: I have added the .ast extension to these four files, next to .php: 1 C:\Users\Sam\AppData\Local\VirtualStore\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml 2 C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\DocumentTypes\MMDocumentTypes.xml 3 C:\Users\Sam\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configuration\Extensions.txt 4 C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS5\configuration\Extensions.txt Note2: sometimes, even .php files do not want to show in design view or live view. Could this be caused by a corrupted installation?

  Read the article

• Migrating away from LVM

  - by Kye

  I have an Ubuntu home media server setup with 4.5TB split across a few hard-drives (1x3TB, 2x1TB) and I'm using LVM2 to manage the volumes. I have recently added a 60GB SSD to my server, and I wish to use it to house the 'root' partition of my server (which is currently under the LVM group). I don't want to simply add it to the LVM volume group, because (afaik) there's no way to ensure that the SSD will be used for the root filesystem. If I just throw it at the VG, it may be used to house my media, which would defeat the purpose of having the SSD in the first place. I feel that my only solution is to somehow remove my root partition from the LVM setup and copy it across to the SSD. My boot partition is, of course, not part of the LVM group. My disk setup is as follows: 60GB SSD: EMPTY. 1TB HDD: /boot, LVM space. 1TB HDD: LVM space. 3TB HHD: LVM space. I have a few logical volumes. my root (/), a 'media' volume for my media collection, a backup one for my network backups.etc. Does anyone have any advice as to how to go about this? My end goal is to have the 60GB SSD used for my boot and root partitions, with everything else on the 3TB/1TB/1TB hard-drives.

  Read the article

• Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

  - by Laurence Gonsalves

  I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• Playing iPad to iPad Wifi games over PPTP VPN

  - by Pez Cuckow

  I'm trying to use a VPN to play iPad to iPad Wifi (Local) games over the internet. Normally you open the game on both iPad's, connect to the same Wifi point and they can "see" and speak to each other. I figure using a VPN I can put them both on the same network (either both on the VPN or one on the "real" network and one on the VPN). On my router I've set up PPTP VPN with the ip range 192.168.1.2-50, where the PC's on the real local network are assigned 192.168.1.100+ When I connect one of the iPads to the VPN, using an external WiFi network (BT Openzone) I can ping it as expected (from any machine on the local network). However the iPad's cannot "see" each other and none of the Wifi-Wifi games work. I've also tried connecting both iPad's to the same VPN, with the result the same. All machines on the local network (and those on the VPN) can ping the iPad's but none of the Wifi to Wifi games work. I've set both iPads to send all trafic over the VPN and if I check their external IP's they match that of the real network. Does anyone know how to fix this? And/or what is causing it? Or what further debug information I can provide? Note: I don't feel this is iPad specific so would prefer if this isn't moved to a Apple SuperUser equivalent

  Read the article

• How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

  - by Chadddada

  I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

  Read the article

• Are These Parts compatible?

  - by ell

  I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

  Read the article

• IP-dependent local port-forwarding on Linux

  - by chronos

  I have configured my server's sshd to listen on a non-standard port 42. However, at work I am behind a firewall/proxy, which only allow outgoing connections to ports 21, 22, 80 and 443. Consequently, I cannot ssh to my server from work, which is bad. I do not want to return sshd to port 22. The idea is this: on my server, locally forward port 22 to port 42 if source IP is matching the external IP of my work's network. For clarity, let us assume that my server's IP is 169.1.1.1 (on eth1), and my work external IP is 169.250.250.250. For all IPs different from 169.250.250.250, my server should respond with an expected 'connection refused', as it does for a non-listening port. I'm very new to iptables. I have briefly looked through the long iptables manual and these related / relevant questions: http://serverfault.com/questions/57872/iptables-question-forwarding-port-x-to-an-ssh-port-of-different-machine-on-the-n http://serverfault.com/questions/140622/how-can-i-port-forward-with-iptables However, those questions deal with more complicated several-host scenarios, and it is not clear to me which tables and chains I should use for local port-forwarding, and if I should have 2 rules (for "question" and "answer" packets), or only 1 rule for "question" packets. So far I have only enabled forwarding via sysctl. I will start testing solutions tomorrow, and will appreciate pointers or maybe case-specific examples for implementing my simple scenario. Is the draft solution below correct? iptables -A INPUT [-m state] [-i eth1] --source 169.250.250.250 -p tcp --destination 169.1.1.1:42 --dport 22 --state NEW,ESTABLISHED,RELATED -j ACCEPT Should I use the mangle table instead of filter? And/or FORWARD chain instead of INPUT?

  Read the article

• DAS vs SAN storage for serving 2 to 4 nodes

  - by Luke404

  We currently have 4 Linux nodes with local storage, arranged in two active/passive pairs with storage mirrored using DRBD, running virtual machines (actually using Xen Hypervisor) for typical hosting workloads (mail, web, a couple VPS, etc.). We're approaching the (presumed) maximum IOPS of those servers, and we're planning to migrate to an external storage solution with two active nodes, with capacity for up to four active nodes. Since we're an all-Dell shop I've done some research and found the MD3200 / MD3200i products should be the ones we're looking for. We are pretty sure we won't be attaching more than 4 hosts on a single storage and I'm wondering if there is any clear advantage for one or the other. In theory I should be able to attach 4 SAS hosts to a single MD3200 (single links on a single controller MD3200, or dual redundant SAS links from each host to a dual-controller MD3200), or 4 iSCSI hosts to a single MD3200i (directly on its 4 GigE ports without any switch, again with dual links for the dual controller option). Both setups should let us implement live VM migration since all hosts can access all the LUNs at the same time, and also some shared filesystem like GFS2 or OCFS2. Also, both setups should allow full redundancy of the whole system (assuming dual controllers in the storage). One difference I can see is that the DAS solution is actually limited to 4 hosts while the iSCSI one should be able to grow to more hosts (adding two GigE switches to the mix). One point for the iSCSI solution is that it would allow us to start out with our current nodes and upgrade them at a later time (we can't add other SAS controllers, but they already have 4 GigE ports each). With the right (iSCSI|SAS) controllers I should be able to connect diskless nodes and boot them off the external storage which I think is a good thing (get rid of any local storage). On the other hand, I would have thought the SAS one to be cheaper but it seems like an MD3200 actually costs a little less than an MD3200i (?) (please note: I've used Dell gear in my examples since that's what we're looking for but I assume the same goes with other vendors) I would like to know if my assumptions above are correct, and if I'm missing any important difference between the two setups.

  Read the article

• Windows, why 8 GB of RAM feel like a few MB?

  - by Desmond Hume

  I'm on Windows 7 x64 with 4-core Intel i7 and 8 GB of RAM, but lately it feels like my computer's "RAM" is located solely on the hard drive. Here is what the task manager shows: The total amount of memory used by the processes in the list is just about 1 GB. And what is happening on my computer for a few days now is that one program (Cataloger.exe) is continually processing large quantities of (rather big) files, repeatedly opening and reading them for the purposes of cataloging. But it doesn't grow too much in memory and stays about that size, about 90 MB. However, the amount of data it processes in, say, 30 minutes can be measured in gigabytes. So my guess was that Windows file caching has something to do with it. And after some research on the topic, I came across this program, called RamMap, that displays detailed info on a computer's RAM. Here is the screenshot: So to me it looks like Windows keeps in RAM huge amounts of data that is no longer needed, redirecting any RAM allocation requests to the pagefile on the hard drive. Even when I close Cataloger.exe, the RamMap reports the size of the mapped file as about the same for a long time on. And it's not just this particular program. Earlier I noticed that similar slowdown occurred after some massive file operations with other programs. So it's really not an exception. Whatever it is, it slows down the computer by like 50 times. Opening a new tab in Chrome takes 20-30 seconds, opening a new program can take up to a minute. Due to the slowdown, some programs even crash. So what do you think, is the problem hiding in file caching or somewhere else? How do I solve it?

  Read the article

• Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

  - by Frederic

  I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

  Read the article

• APC (php accelerator). What situations should I use this?

  - by matthewsteiner

  So I've just got a small vps. I've installed apc, which sped up normal pages by 20% - 30%. I was reading about memcached and came to the conclusion that I can use apc for the same thing (caching objects from database results) if I'm not distributing over other servers. Since I only have the one server, apc will be just as beneficial for caching things in memory. I'm still in development mode, and I'm sure it's hard to tell what would be best for production mode. The thing is, my database queries seem pretty fast (between .0008 and .02). None of my pages are way database intensive. Would it be beneficial to me to cache results in memory? If the database is running well right now, is it going to be having a hard time later? Also, is connecting to the database at all something that costs speed (even if I cache most of my queries, every page has to have a little database interaction for session data). So, basically if I have a limited ram, and one machine, will using apc rather than just letting the database be uncached be much faster? Ideas?

  Read the article

• How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

  - by sauparna

  I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

  Read the article

• Hugepages not utilized by MySQL 5.0, CentOS 5

  - by TechZilla

  I've set up Hugepages, but i'm not seeing any of them reserved. Have I missed a step, or for some particular reason, is MySQL is unable to utilize the Hugepages? I have not created a mount of hugetlbfs, although from what I read, MySQL would not call pages in such a manner. If I'm wrong, please let me know, as that would be a trivial solution. Almost all my MySQL tables are using InnoDB. NOTE: I created a hugetlbfs, no change as expected. Is it possible that rebooting would rectify this situation? I would not want to go through the procedure, as this is high availability, but would do so if necessary. This is the configurations, which I believe are relevant. /etc/sysctl.conf ... ## Huge Pages vm.nr_hugepages = 4096 vm.hugetlb_shm_group = 27 ## SHM kernel.shmmax = 34359738368 kernel.shmall = 8589934592 ... /etc/security/limits.conf ... mysql soft nofile 12888 mysql hard nofile 51552 @mysql soft memlock unlimited @mysql hard memlock unlimited /etc/my.cnf [mysqld] large-pages ... grep Huge /proc/meminfo HugePages_Total: 4096 HugePages_Free: 4096 HugePages_Rsvd: 0 Hugepagesize: 2048 kB id mysql uid=27(mysql) gid=27(mysql) groups=27(mysql) context=root:system_r:unconfined_t:SystemLow-SystemHigh tail -6 /var/log/mysqld.log InnoDB: HugeTLB: Warning: Failed to allocate 1342193664 bytes. errno 12 InnoDB HugeTLB: Warning: Using conventional memory pool 120808 15:49:25 InnoDB: Started; log sequence number 0 1729804158 120808 15:49:25 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.95' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution I would really appreciate any help, I'm completely out of ideas. If I missed any more relevant configs, or diagnostics, please comment and I'll add it to the question.

  Read the article

• HD video editing system with Truecrypt

  - by Rob

  I'm looking to do hi-def video editing and transcoding on an unencrypted standard partition, with Truecrypt on the system partition for sensitive data. I'm aiming to keep certain data private but still have performance where needed. Goals: Maximum, unimpacted, performance possible for hi-def video editing, encryption of video not required Encrypt system partition, using Truecrypt, for web/email privacy, etc. in the event of loss In other words I want to selectively encrypt the hard drive - i.e. make the system partition encrypted but not impact the original maximum performance that would be available to me for hi-def/HD video editing. The thinking is to use an unencrypted partition for the video and set up video applications to point at that. Assuming that they would use that partition only for their workspace and not the encrypted system partition, then I should expect to not get any performance hit. Would I be correct? I guess it might depend on the application, if that app is hard-wired to use the system partition always for temporary storage during editing and transcoding, or if it has to be installed on the C: system partition always. So some real data on how various apps behave in the respect would be useful, e.g. Adobe, Cyberlink, Nero etc. etc. I have a Intel i7 Quad-core (8 threads) 1.6Ghz (up to 2.8Ghz turbo-boost) 4Gb, 7200rpm SATA, nvidia HP laptop. I've read the excellent posting about the general performance impact of truecrypt but the benchmarks weren't specific enough for my needs where I'm dealing with HD-video and using a non-encrypted partition to maintain max performance.

  Read the article

• PC only boots from Linux-based media and won't boot from DOS-based media

  - by Xolstice

  I have this problem where the PC only seems to boot from a floppy disk or CD if it was created as a Linux-based bootable media. If it was created as a DOS-based bootable media the system just freezes at the starting point of the boot process. I originally asked this under question 139515 for CD booting only, and based on the given answers, I was under the impression the problem was with the CD-ROM drive; however, I have since installed a newly purchased CD-ROM drive and the same freezing occurs. This then made me try the DOS bootable floppy disk approach and I was quite surprised that it exhibited the same freezing problem. I then tried try a Linux bootable floppy and everything booted from it without any issues. As I mentioned in my original question, the PC was booting just fine from the DOS-based bootable CD, and then it suddenly decides to pull this freezing stunt. I can't remember if I changed anything in the BIOS settings that may I have caused the problem, but I am wondering if that could be the case - it is currently using the Award Module BIOS v4.60PGMA. Can anyone help?

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by Bluebill

  I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: fsck from util-linux-ng 2.16 There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots?

  Read the article

• WebDav System Error 67 in Windows XP

  - by Nixphoe

  Issue: I'm having issues getting WebDav to work in the command line on Windows XP, both Service Pack 2 and Service Pack 3. C:\>net use z: https://mywebsite.com/software/ System error 67 has occurred. The network name cannot be found. I have tested this with two webdav server. Both Ubuntu Apache and I Windows Server 2003 IIS. Both get the same result. Things That Haven't Worked: I've installed the following Microsoft KB on my XP machines with no avail. I've also found the following reg key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WebClient\Parameters UseBasicAuth REG_DWORD 1 I try the following when trying to use a few work around I've dug up on the web, all producing the same result. net use z: https://mywebsite.com/software net use z: https://mywebsite.com/software# net use z: https://mywebsite.com/software/ net use z: https://mywebsite.com/software/# I've also tried all the above combinations adding a user into it /user:user and /user:user@domain. I've also tried using http:// rather than https://. I've tried "\\server.com@ssl:443\folder" I've gone over networking related issues as @WesleyDavid had pointed out. Things that do work: I can connect to the webdav folder via the URL and with mapping in Network Place, with XP. But the command line doesn't work (I need a drive letter). Windows 7 works perfectly with the same command. My Delemma: I need this to work with a drive letter. What else can I try to get this working?

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• Maintaining "Portability" Between Linux and Windows 7

  - by lokheart

  I am using the following ways in my office's Windows 7 machine to maintain my "portabilibity" when disaster strikes and I need to switch computer while I have no luxury of time for reinstalling all my program to the new PC. a majority of programs I used are portable, mostly from portableapp.com, like notepad+, GIMP, even R, I extract them and store them in a folder in My document, in a structure similar to the default portableapp installation when they are installed to a thumbdrive only a few software that portable version is not available and I will install them as usual all of my working files are stored in a folder in My document I regularly backup them all using syncback, because this program can keep versioning of my backup, and the backup is stored in a portable drive. One day I need to switch my computer and the operation is relative simple for me: I just move the two folders mentioned above into the my document folder of the new PC, install those few "non-portable" program in it, and this is almost done, some minor hiccups can be solved by reinstalling the portableapp into the drive. Overall speaking it is a smooth process. I would like to maintain the same degree of "portability" in my home Linux desktop (Ubuntu or Mint, I'm still deciding), that is, if my Linux crash and I need to reinstall it again. All I need to do is the move the two folder back to the new Linux, and most of my work will be almost ready to be worked on again. But I don't know how to find a Linux-alternative of portableapps. Being a newer to Linux, can anyone tell me whether this is possible in Linux?

  Read the article

• What precautions should I take once defective RAM has been replaced?

  - by DustByte

  I recently discovered that my RAM is faulty (MemTest86+). I am waiting for new RAM to be sent to me.  It was through sheer luck that I discovered something was wrong. I was copying a large amount of big files and decided to verify the copies by their checksums. I discovered strange discrepancies, and noticed that checksum computation for the same file was not consistent. Now, this is the only problem I have encountered; no BSOD, no crashes, no errors. In a sense this makes me more worried than if I would have had massive crashes. I have no idea for how long the RAM has been faulty, and I have no idea if corrupt bits have been saved into files on my hard drives. I do know the RAM was fine two months ago (tested it back then). I am a user of Adobe's Lightroom and I am worried that photos or the catalog itself could carry corrupt data. Question: what should I do once new healthy RAM has been installed? Reinstall Windows (I'm using Windows 7, 64 bit)? Is there a risk that I will be presented with nasty surprises in the future if I don't? What about personal files? I have backups of some of the files but for newer files I'm not sure I can even trust the backups. It's going to take me many hard hours to manually replace files with older versions, or compare checksums.

  Read the article

< Previous Page | 395 396 397 398 399 400 401 402 403 404 405 406  | Next Page >