shift company - Page 399

Cache Simulator in C

- by DuffDuff

Ok this is only my second question, and it's quite a doozy. It's for a school assignment, but no one (including the TAs) seems to be able to help me. It's kind of a tall order but I'm not sure where else to turn. Essentially the assignment was to make a cache simulator. This version is direct mapping and is actually only a small portion of the whole project, but if I can't even get this down I have no chance with other associativities. I'm posting my whole code because I don't want to make any assumptions about where the problem is. This is the test case: http://www.mediafire.com/?ty5dnihydnw And you run the following command: ./sims 512 direct 32 fifo wt pinatrace.out You're supposed to get: hits: 604037 misses 138349 writes: 239269 reads: 138349 But I get: Hits: 587148 Misses: 155222 Writes: 239261 Reads: 155222 If anyone could at least point me in the right direction it would be greatly appreciated. I've been stuck on this for about 12 hours. #include <stdio.h> #include <stdlib.h> #include <string.h> #include <math.h> struct myCache { int valid; char *tag; char *block; }; /* sim [-h] <cache size> <associativity> <block size> <replace alg> <write policy> <trace file> */ //God willing I come up with a better Hex to Bin convertion that maintains the beginning 0s... void hex2bin(char input[], char output[]) { int i; int a = 0; int b = 1; int c = 2; int d = 3; int x = 4; int size; size = strlen(input); for (i = 0; i < size; i++) { if (input[i] =='0') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='1') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='2') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='3') { output[i*x +a] = '0'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='x') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='5') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='6') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='7') { output[i*x +a] = '0'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='8') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='9') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='a') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='b') { output[i*x +a] = '1'; output[i*x +b] = '0'; output[i*x +c] = '1'; output[i*x +d] = '1'; } else if (input[i] =='c') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '0'; } else if (input[i] =='d') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '0'; output[i*x +d] = '1'; } else if (input[i] =='e') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '0'; } else if (input[i] =='f') { output[i*x +a] = '1'; output[i*x +b] = '1'; output[i*x +c] = '1'; output[i*x +d] = '1'; } } output[32] = '\0'; } int main(int argc, char* argv[]) { FILE *tracefile; char readwrite; int trash; int cachesize; int blocksize; int setnumber; int blockbytes; int setbits; int blockbits; int tagsize; int m; int count = 0; int count2 = 0; int count3 = 0; int i; int j; int xindex; int jindex; int kindex; int lindex; int setadd; int totalset; int writeMiss = 0; int writeHit = 0; int cacheMiss = 0; int cacheHit = 0; int read = 0; int write = 0; int size; int extra; char bbits[100]; char sbits[100]; char tbits[100]; char output[100]; char input[100]; char origtag[100]; if (argc != 7) { if (strcmp(argv[0], "-h")) { printf("./sim2 <cache size> <associativity> <block size> <replace alg> <write policy> <trace file>\n"); return 0; } else { fprintf(stderr, "Error: wrong number of parameters.\n"); return -1; } } tracefile = fopen(argv[6], "r"); if(tracefile == NULL) { fprintf(stderr, "Error: File is NULL.\n"); return -1; } //Determining size of sbits, bbits, and tag cachesize = atoi(argv[1]); blocksize = atoi(argv[3]); setnumber = (cachesize/blocksize); printf("setnumber: %d\n", setnumber); setbits = (round((log(setnumber))/(log(2)))); printf("sbits: %d\n", setbits); blockbits = log(blocksize)/log(2); printf("bbits: %d\n", blockbits); tagsize = 32 - (blockbits + setbits); printf("t: %d\n", tagsize); struct myCache newCache[setnumber]; //Allocating Space for Tag Bits, initiating tag and valid to 0s for(i=0;i<setnumber;i++) { newCache[i].tag = (char *)malloc(sizeof(char)*(tagsize+1)); for(j=0;j<tagsize;j++) { newCache[i].tag[j] = '0'; } newCache[i].valid = 0; } while(fgetc(tracefile)!='#') { setadd = 0; totalset = 0; //read in file fseek(tracefile,-1,SEEK_CUR); fscanf(tracefile, "%x: %c %s\n", &trash, &readwrite, origtag); //shift input Hex size = strlen(origtag); extra = (10 - size); for(i=0; i<extra; i++) input[i] = '0'; for(i=extra, j=0; i<(size-(2-extra)); j++, i++) input[i]=origtag[j+2]; input[8] = '\0'; // Convert Hex to Binary hex2bin(input, output); //Resolving the Address into tbits, sbits, bbits for (xindex=0, jindex=(32-blockbits); jindex<32; jindex++, xindex++) { bbits[xindex] = output[jindex]; } bbits[xindex]='\0'; for (xindex=0, kindex=(32-(blockbits+setbits)); kindex<32-(blockbits); kindex++, xindex++){ sbits[xindex] = output[kindex]; } sbits[xindex]='\0'; for (xindex=0, lindex=0; lindex<(32-(blockbits+setbits)); lindex++, xindex++){ tbits[xindex] = output[lindex]; } tbits[xindex]='\0'; //Convert set bits from char array into ints for(xindex = 0, kindex = (setbits -1); xindex < setbits; xindex ++, kindex--) { if (sbits[xindex] == '1') setadd = 1; if (sbits[xindex] == '0') setadd = 0; setadd = setadd * pow(2, kindex); totalset += setadd; } //Calculating Hits and Misses if (newCache[totalset].valid == 0) { newCache[totalset].valid = 1; strcpy(newCache[totalset].tag, tbits); } else if (newCache[totalset].valid == 1) { if(strcmp(newCache[totalset].tag, tbits) == 0) { if (readwrite == 'W') { cacheHit++; write++; } if (readwrite == 'R') cacheHit++; } else { if (readwrite == 'R') { cacheMiss++; read++; } if (readwrite == 'W') { cacheMiss++; read++; write++; } strcpy(newCache[totalset].tag, tbits); } } } printf("Hits: %d\n", cacheHit); printf("Misses: %d\n", cacheMiss); printf("Writes: %d\n", write); printf("Reads: %d\n", read); }

Read the article

Weird Excel Formatting

- by Gage

Recently a new co-op was hired at our company and has been tasked to run a report. The report queries the database and returns a resultset and from there procedes to create the spreadsheets. Depending on the number of days selected a different number of reports are generated but I do not believe that is relavent to the question. Basically it runs the reports and loops through the resultset but at some point continues to loop through until tow 65536 at which it stops. For Example if the resultset contained 74 records then the first 74 rows would appear normally (formatted yellow) while everything after that would also be formatted yellow although it should be left alone. I am inheriting this code as I to am a new co-op. Apparently this only happens when a "change of guards" happens (New co-op has to run the report).` DoCmd.SetWarnings False DoCmd.OpenQuery ("DailySummaryQueryMain") strSQL = "SELECT * FROM DailySummaryMain" Set rs = CurrentDb.OpenRecordset(strSQL) DoCmd.Echo True, "Running first Report" If Not rs.EOF Then rs.MoveFirst Do While Not rs.EOF And Not rs.BOF xlapp.Range("A" & i).Value = rs.Fields(0).Value xlapp.Range("B" & i).Value = rs.Fields(1).Value xlapp.Range("C" & i).Value = rs.Fields(2).Value Set rs2 = CurrentDb.OpenRecordset("SELECT dbo_StatusType.StatusTypeID, dbo_StatusType.Name FROM dbo_StatusType WHERE (((dbo_StatusType.StatusTypeID)=" & rs.Fields(3) & "))") rs2.MoveFirst xlapp.Range("D" & i).Value = rs2.Fields(1).Value xlapp.Range("E" & i).Value = rs.Fields(4).Value xlapp.Range("F" & i).Value = rs.Fields(5).Value xlapp.Range("G" & i).Value = rs.Fields(6).Value 'count number of outages that start and end on same day If Format(xlapp.Range("F" & i).Value, "mm/dd/yyyy") = Format(xlapp.Range("G" & i).Value, "mm/dd/yyyy") Then dayCount = dayCount + 1 End If xlapp.Range("H" & i).Value = rs.Fields(7).Value xlapp.Range("I" & i).Value = rs.Fields(8).Value xlapp.Range("J" & i).Value = rs.Fields(9).Value xlapp.Range("K" & i).Value = rs.Fields(10).Value xlapp.Range("L" & i).Value = rs.Fields(11).Value xlapp.Range("M" & i).Value = rs.Fields(12).Value xlapp.Range("N" & i).Value = rs.Fields(13).Value 'highlite recently modified rows If rs.Fields(14).Value = "Yes" Then xlapp.Range("A" & i & ":N" & i).Select With xlapp.Selection.Interior .ColorIndex = 36 .Pattern = xlSolid End With End If 'break apart by sector If CInt(rs.Fields(2).Value) = 1 Then row = row1 ElseIf CInt(rs.Fields(2).Value) = 2 Then row = row2 ElseIf CInt(rs.Fields(2).Value) = 3 Then row = row3 Else row = row4 End If xlapp.Worksheets(CInt(rs.Fields(2).Value) + 1).Activate xlapp.Range("A" & row).Value = rs.Fields(0).Value xlapp.Range("B" & row).Value = rs.Fields(1).Value xlapp.Range("C" & row).Value = rs.Fields(13).Value xlapp.Range("D" & row).Value = rs.Fields(4).Value xlapp.Range("E" & row).Value = rs.Fields(5).Value xlapp.Range("F" & row).Value = rs.Fields(6).Value xlapp.Range("G" & row).Value = rs.Fields(7).Value xlapp.Range("H" & row).Value = rs.Fields(8).Value xlapp.Range("I" & row).Value = rs.Fields(9).Value xlapp.Range("J" & row).Value = rs.Fields(10).Value xlapp.Range("K" & row).Value = "" xlapp.Range("L" & row).Value = rs.Fields(11).Value xlapp.Range("M" & row).Value = rs.Fields(13).Value If CInt(rs.Fields(2).Value) = 1 Then row1 = row1 + 1 ElseIf CInt(rs.Fields(2).Value) = 2 Then row2 = row2 + 1 ElseIf CInt(rs.Fields(2).Value) = 3 Then row3 = row3 + 1 Else row4 = row4 + 1 End If 'activate main summary sheet for next outage xlapp.Worksheets(1).Activate i = i + 1 rs.MoveNext Loop` Also I should note that this is all happening within an access database which has its tables linked from SQL. The query is extremely slow to run from which I believe is the use of views but thats neither here nor there. All you have to know is attempting to debug takes an enormous amount of time due to having to wait for the recordset to return. My guess is that its not checking to see if the resultset is empty correctly. Is there a way I could check to see if theres a value is rs.Fields(0) and base it off that maybe? That is the ID column and there should always be a value. I am wondering why rs.EOF isn't catching this though.

Read the article

JAVA image transfer problem

- by user579098

Hi, I have a school assignment, to send a jpg image,split it into groups of 100 bytes, corrupt it, use a CRC check to locate the errors and re-transmit until it eventually is built back into its original form. It's practically ready, however when I check out the new images, they appear with errors.. I would really appreciate if someone could look at my code below and maybe locate this logical mistake as I can't understand what the problem is because everything looks ok :S For the file with all the data needed including photos and error patterns one could download it from this link:http://rapidshare.com/#!download|932tl2|443122762|Data.zip|739 Thanks in advance, Stefan p.s dont forget to change the paths in the code for the image and error files package networks; import java.io.*; // for file reader import java.util.zip.CRC32; // CRC32 IEEE (Ethernet) public class Main { /** * Reads a whole file into an array of bytes. * @param file The file in question. * @return Array of bytes containing file data. * @throws IOException Message contains why it failed. */ public static byte[] readFileArray(File file) throws IOException { InputStream is = new FileInputStream(file); byte[] data=new byte[(int)file.length()]; is.read(data); is.close(); return data; } /** * Writes (or overwrites if exists) a file with data from an array of bytes. * @param file The file in question. * @param data Array of bytes containing the new file data. * @throws IOException Message contains why it failed. */ public static void writeFileArray(File file, byte[] data) throws IOException { OutputStream os = new FileOutputStream(file,false); os.write(data); os.close(); } /** * Converts a long value to an array of bytes. * @param data The target variable. * @return Byte array conversion of data. * @see http://www.daniweb.com/code/snippet216874.html */ public static byte[] toByta(long data) { return new byte[] { (byte)((data >> 56) & 0xff), (byte)((data >> 48) & 0xff), (byte)((data >> 40) & 0xff), (byte)((data >> 32) & 0xff), (byte)((data >> 24) & 0xff), (byte)((data >> 16) & 0xff), (byte)((data >> 8) & 0xff), (byte)((data >> 0) & 0xff), }; } /** * Converts a an array of bytes to long value. * @param data The target variable. * @return Long value conversion of data. * @see http://www.daniweb.com/code/snippet216874.html */ public static long toLong(byte[] data) { if (data == null || data.length != 8) return 0x0; return (long)( // (Below) convert to longs before shift because digits // are lost with ints beyond the 32-bit limit (long)(0xff & data[0]) << 56 | (long)(0xff & data[1]) << 48 | (long)(0xff & data[2]) << 40 | (long)(0xff & data[3]) << 32 | (long)(0xff & data[4]) << 24 | (long)(0xff & data[5]) << 16 | (long)(0xff & data[6]) << 8 | (long)(0xff & data[7]) << 0 ); } public static byte[] nextNoise(){ byte[] result=new byte[100]; // copy a frame's worth of data (or remaining data if it is less than frame length) int read=Math.min(err_data.length-err_pstn, 100); System.arraycopy(err_data, err_pstn, result, 0, read); // if read data is less than frame length, reset position and add remaining data if(read<100){ err_pstn=100-read; System.arraycopy(err_data, 0, result, read, err_pstn); }else // otherwise, increase position err_pstn+=100; // return noise segment return result; } /** * Given some original data, it is purposefully corrupted according to a * second data array (which is read from a file). In pseudocode: * corrupt = original xor corruptor * @param data The original data. * @return The new (corrupted) data. */ public static byte[] corruptData(byte[] data){ // get the next noise sequence byte[] noise = nextNoise(); // finally, xor data with noise and return result for(int i=0; i<100; i++)data[i]^=noise[i]; return data; } /** * Given an array of data, a packet is created. In pseudocode: * frame = corrupt(data) + crc(data) * @param data The original frame data. * @return The resulting frame data. */ public static byte[] buildFrame(byte[] data){ // pack = [data]+crc32([data]) byte[] hash = new byte[8]; // calculate crc32 of data and copy it to byte array CRC32 crc = new CRC32(); crc.update(data); hash=toByta(crc.getValue()); // create a byte array holding the final packet byte[] pack = new byte[data.length+hash.length]; // create the corrupted data byte[] crpt = new byte[data.length]; crpt = corruptData(data); // copy corrupted data into pack System.arraycopy(crpt, 0, pack, 0, crpt.length); // copy hash into pack System.arraycopy(hash, 0, pack, data.length, hash.length); // return pack return pack; } /** * Verifies frame contents. * @param frame The frame data (data+crc32). * @return True if frame is valid, false otherwise. */ public static boolean verifyFrame(byte[] frame){ // allocate hash and data variables byte[] hash=new byte[8]; byte[] data=new byte[frame.length-hash.length]; // read frame into hash and data variables System.arraycopy(frame, frame.length-hash.length, hash, 0, hash.length); System.arraycopy(frame, 0, data, 0, frame.length-hash.length); // get crc32 of data CRC32 crc = new CRC32(); crc.update(data); // compare crc32 of data with crc32 of frame return crc.getValue()==toLong(hash); } /** * Transfers a file through a channel in frames and reconstructs it into a new file. * @param jpg_file File name of target file to transfer. * @param err_file The channel noise file used to simulate corruption. * @param out_file The name of the newly-created file. * @throws IOException */ public static void transferFile(String jpg_file, String err_file, String out_file) throws IOException { // read file data into global variables jpg_data = readFileArray(new File(jpg_file)); err_data = readFileArray(new File(err_file)); err_pstn = 0; // variable that will hold the final (transfered) data byte[] out_data = new byte[jpg_data.length]; // holds the current frame data byte[] frame_orig = new byte[100]; byte[] frame_sent = new byte[100]; // send file in chunks (frames) of 100 bytes for(int i=0; i<Math.ceil(jpg_data.length/100); i++){ // copy jpg data into frame and init first-time switch System.arraycopy(jpg_data, i*100, frame_orig, 0, 100); boolean not_first=false; System.out.print("Packet #"+i+": "); // repeat getting same frame until frame crc matches with frame content do { if(not_first)System.out.print("F"); frame_sent=buildFrame(frame_orig); not_first=true; }while(!verifyFrame(frame_sent)); // usually, you'd constrain this by time to prevent infinite loops (in // case the channel is so wacked up it doesn't get a single packet right) // copy frame to image file System.out.println("S"); System.arraycopy(frame_sent, 0, out_data, i*100, 100); } System.out.println("\nDone."); writeFileArray(new File(out_file),out_data); } // global variables for file data and pointer public static byte[] jpg_data; public static byte[] err_data; public static int err_pstn=0; public static void main(String[] args) throws IOException { // list of jpg files String[] jpg_file={ "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo1.jpg", "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo2.jpg", "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo3.jpg", "C:\\Users\\Stefan\\Desktop\\Data\\Images\\photo4.jpg" }; // list of error patterns String[] err_file={ "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 1.DAT", "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 2.DAT", "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 3.DAT", "C:\\Users\\Stefan\\Desktop\\Data\\Error Pattern\\Error Pattern 4.DAT" }; // loop through all jpg/channel combinations and run tests for(int x=0; x<jpg_file.length; x++){ for(int y=0; y<err_file.length; y++){ System.out.println("Transfering photo"+(x+1)+".jpg using Pattern "+(y+1)+"..."); transferFile(jpg_file[x],err_file[y],jpg_file[x].replace("photo","CH#"+y+"_photo")); } } } }

Read the article

What strategy do you use for package naming in Java projects and why?

- by Tim Visher

I thought about this awhile ago and it recently resurfaced as my shop is doing its first real Java web app. As an intro, I see two main package naming strategies. (To be clear, I'm not referring to the whole 'domain.company.project' part of this, I'm talking about the package convention beneath that.) Anyway, the package naming conventions that I see are as follows: Functional: Naming your packages according to their function architecturally rather than their identity according to the business domain. Another term for this might be naming according to 'layer'. So, you'd have a *.ui package and a *.domain package and a *.orm package. Your packages are horizontal slices rather than vertical. This is much more common than logical naming. In fact, I don't believe I've ever seen or heard of a project that does this. This of course makes me leery (sort of like thinking that you've come up with a solution to an NP problem) as I'm not terribly smart and I assume everyone must have great reasons for doing it the way they do. On the other hand, I'm not opposed to people just missing the elephant in the room and I've never heard a an actual argument for doing package naming this way. It just seems to be the de facto standard. Logical: Naming your packages according to their business domain identity and putting every class that has to do with that vertical slice of functionality into that package. I have never seen or heard of this, as I mentioned before, but it makes a ton of sense to me. I tend to approach systems vertically rather than horizontally. I want to go in and develop the Order Processing system, not the data access layer. Obviously, there's a good chance that I'll touch the data access layer in the development of that system, but the point is that I don't think of it that way. What this means, of course, is that when I receive a change order or want to implement some new feature, it'd be nice to not have to go fishing around in a bunch of packages in order to find all the related classes. Instead, I just look in the X package because what I'm doing has to do with X. From a development standpoint, I see it as a major win to have your packages document your business domain rather than your architecture. I feel like the domain is almost always the part of the system that's harder to grok where as the system's architecture, especially at this point, is almost becoming mundane in its implementation. The fact that I can come to a system with this type of naming convention and instantly from the naming of the packages know that it deals with orders, customers, enterprises, products, etc. seems pretty darn handy. It seems like this would allow you to take much better advantage of Java's access modifiers. This allows you to much more cleanly define interfaces into subsystems rather than into layers of the system. So if you have an orders subsystem that you want to be transparently persistent, you could in theory just never let anything else know that it's persistent by not having to create public interfaces to its persistence classes in the dao layer and instead packaging the dao class in with only the classes it deals with. Obviously, if you wanted to expose this functionality, you could provide an interface for it or make it public. It just seems like you lose a lot of this by having a vertical slice of your system's features split across multiple packages. I suppose one disadvantage that I can see is that it does make ripping out layers a little bit more difficult. Instead of just deleting or renaming a package and then dropping a new one in place with an alternate technology, you have to go in and change all of the classes in all of the packages. However, I don't see this is a big deal. It may be from a lack of experience, but I have to imagine that the amount of times you swap out technologies pales in comparison to the amount of times you go in and edit vertical feature slices within your system. So I guess the question then would go out to you, how do you name your packages and why? Please understand that I don't necessarily think that I've stumbled onto the golden goose or something here. I'm pretty new to all this with mostly academic experience. However, I can't spot the holes in my reasoning so I'm hoping you all can so that I can move on. Thanks in advance!

Read the article

How to add a new item in a sharepoint list using web services in C sharp

- by Frank

Hi, I'm trying to add a new item to a sharepoint list from a winform application in c# using web services. As only result, I'm getting the useless exception "Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown." I have a web reference named WebSrvRef to http://server/site/subsite/_vti_bin/Lists.asmx And this code: XmlDocument xmlDoc; XmlElement elBatch; XmlNode ndReturn; string[] sValues; string sListGUID; string sViewGUID; if (lstResults.Items.Count < 1) { MessageBox.Show("Unable to Add To SharePoint\n" + "No test file processed. The list is blank.", "Add To SharePoint", MessageBoxButtons.OK, MessageBoxIcon.Exclamation); return; } WebSrvRef.Lists listService = new WebSrvRef.Lists(); sViewGUID = "{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}"; // Test List View GUID sListGUID = "{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}"; // Test List GUID listService.Credentials= System.Net.CredentialCache.DefaultCredentials; frmAddToSharePoint dlgAddSharePoint = new frmAddToSharePoint(); if (dlgAddSharePoint.ShowDialog() == DialogResult.Cancel) { dlgAddSharePoint.Dispose(); listService.Dispose(); return; } sValues = dlgAddSharePoint.Tag.ToString().Split('~'); dlgAddSharePoint.Dispose(); string strBatch = "<Method ID='1' Cmd='New'>" + "<Field Name='Client#'>" + sValues[0] + "</Field>" + "<Field Name='Company'>" + sValues[1] + "</Field>" + "<Field Name='Contact Name'>" + sValues[2] + "</Field>" + "<Field Name='Phone Number'>" + sValues[3] + "</Field>" + "<Field Name='Brand'>" + sValues[4] + "</Field>" + "<Field Name='Model'>" + sValues[5] + "</Field>" + "<Field Name='DPI'>" + sValues[6] + "</Field>" + "<Field Name='Color'>" + sValues[7] + "</Field>" + "<Field Name='Compression'>" + sValues[8] + "</Field>" + "<Field Name='Value % 1'>" + (((float)lstResults.Groups["Value 1"].Tag)*100).ToString("##0.00") + "</Field>" + "<Field Name='Value % 2'>" + (((float)lstResults.Groups["Value 2"].Tag)*100).ToString("##0.00") + "</Field>" + "<Field Name='Value % 3'>" + (((float)lstResults.Groups["Value 3"].Tag)*100).ToString("##0.00") + "</Field>" + "<Field Name='Value % 4'>" + (((float)lstResults.Groups["Value 4"].Tag)*100).ToString("##0.00") + "</Field>" + "<Field Name='Value % 5'>" + (((float)lstResults.Groups["Value 5"].Tag)*100).ToString("##0.00") + "</Field>" + "<Field Name='Comments'></Field>" + "<Field Name='Overall'>" + (fTotalScore*100).ToString("##0.00") + "</Field>" + "<Field Name='Average'>" + (fTotalAvg * 100).ToString("##0.00") + "</Field>" + "<Field Name='Transfered'>" + sValues[9] + "</Field>" + "<Field Name='Notes'>" + sValues[10] + "</Field>" + "<Field Name='Resolved'>" + sValues[11] + "</Field>" + "</Method>"; try { xmlDoc = new System.Xml.XmlDocument(); elBatch = xmlDoc.CreateElement("Batch"); elBatch.SetAttribute("OnError", "Continue"); elBatch.SetAttribute("ListVersion", "1"); elBatch.SetAttribute("ViewName", sViewGUID); strBatch = strBatch.Replace("&", "&"); elBatch.InnerXml = strBatch; ndReturn = listService.UpdateListItems(sListGUID, elBatch); MessageBox.Show(ndReturn.OuterXml); listService.Dispose(); } catch(Exception Ex) { MessageBox.Show(Ex.Message + "\n\nSource\n" + Ex.Source + "\n\nTargetSite\n" + Ex.TargetSite + "\n\nStackTrace\n" + Ex.StackTrace, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); listService.Dispose(); } What am I doing wrong? What am I missing? Please help!! Frank

Read the article

Design pattern for parsing data that will be grouped to two different ways and flipped

- by lewisblackfan

I'm looking for an easily maintainable and extendable design model for a script to parse an excel workbook into two separate workbooks after pulling data from other locations like the command line, and a database. The high level details are as follows. I need to parse an excel workbook containing a sheet that lists unique question names, the only reliable information that can be parsed from the question name is the book code that identifies the title and edition of the textbook the question is associated with, the rest of the question name is not standardized well enough to be reliably parsed by computer. The general form of the question name is best described by the following regular expression. '^(\w+)\s(\w{1,2})\.(\w{1,2})\.(\w{1,3})\.(\w{1,3}\.)*$' The first sub-pattern is the book code, the second sub-pattern is 90% of the time the chapter, and the rest of the sub-patterns could be section, problem type, problem number, or question type information. There is no simple logic, at least not one I can find. There will be a minimum of three other columns in this spreadsheet; one column will be the chapter the question is associated with, the second will be the section within the chapter the question is associated with, and the third will be some kind of asset indicated by a uniform resource locator. 1 | 1 | qname1 | url | description | url | description ... 1 | 1 | qname2 | url | description 1 | 1 | qname3 | url | description | url | description | url | The asset can be indicated by a full or partial uniform resource locator, the partial url will need to be completed before it can be fed into the application. There theoretically could be no limit to the number of asset columns, the assets will be grouped in columns by type. Some times additional data will have to be retrieved from a database or combined with the book code before the asset url is complete and can be understood by the application that will be using the asset. The type is an abstraction, there are eight types right now, each with their own logic in how the uniform resource locator is handled and or completed, and I have to add a new type and its logic every three or four months. For each asset url there is the possibility of a description column, a character string for display in the application, but not always. (I've already worked out validating the description text, and squashing MSs obscure code page down to something 7-bit ascii can handle.) Now that all the details are filled-in I can get to the actual problem of parsing the file. I need to split the information in this excel workbook into two separate workbooks. The first workbook will group all the questions by section in rows. With the first cell being the section doublet and the rest of the cells in the row are the question names. 1.1 | qname1 | qname2 | qname3 | qname4 | 1.2 | qname1 | qname2 | qname3 | 1.3 | qname1 | qname2 | qname3 | qname4 | qname5 There is no set number of questions for each section as you can see from the above example. The second workbook is more complicated, there is one row per asset, and question names that have more than one asset will be duplicated. There will be four or five columns on this sheet. The first is the question name for the asset, the second is a media type used to select the correct icon for the asset in the application, the third is string representing the asset type, the four is the full and complete uniform resource locator for the asset, and the fifth columns is the optional text description for the asset. q1 | mtype1 | atype1 | url | description q1 | mtype2 | atype2 | url | description q1 | mtype2 | atype3 | url | description q2 | mtype1 | atype1 | url | description q2 | mtype2 | atype3 | url | description For the original six types I did have a script that parsed the source excel workbook into the other two excel workbooks, and I was able to add two more types until I ran aground on the implementation of the ninth type and tenth types. What broke my script was the fact that the ninth type is actually a sub-type of one of the original six, but with entirely different logic, and my mostly procedural script could not accommodate without duplicating a lot of code. I also had a lot of bugs in the script and will be writing the test first on this time around. I'm stuck with the format for the resulting two workbooks, this script is glue code, development went ahead with the project without bothering to get a complete spec from the sponsor. I work for the same company as the developers but in the editorial department, editorial is co-sponsor of the project, and am expected to fix pesky details like this (I'm foaming at the mouth as I type this). I've tried factories, I've tried different object models, but each resulting workbook is so different when I find a design that works for generating one workbook the code is not really usable for generating the other. What I would really like are ideas about a maintainable and extensible design for parsing the source workbook into both workbooks with maximum code reuse, and or sympathy.

Read the article

website creation - for non web programmers?

- by Tim

I thought I would find decent questions and answers for this, but none really caught my eye... I am a C++ developer and I own a few domains. I'd like to start off with simple web sites for each with a minimum of time and fuss and minimum learning. I have too many projects going and don't have the time to learn how to build websites. One is for a company that currently has only a single product with custom development as well. I hacked together some really bad html with paypal links on it. It is just one simple product. I want to add uservoice to it and maybe some other stuff like FAQ, forums, etc. Right now I just link to a google group I created. Another is a startup in development phase, but we want to provide simple content like whitepapers and press releases and a section for investors. - mostly an "about us" type of thing. We will also be providing details about our product. Then there is a blog site - currently using godaddy's quickblogcast. Not a bad start but I suspect I want to move to something else. The question is - is there a framework that I can use that will make decent, if not outstanding, sites? Again, I have my hands full with three projects in addition to my day job and don't have time to learn web programming. I also don;t want to just pay a web person and then be out in the cold for upgrades, changes, etc. I have been burned before. I am happy with a web-based app or a desktop app that builds html or whatever and then I can ftp it up to the hosting servers. To summarize: - simple to get started - low time to get a web page going - ability to integrate with a few hand-done pages - pay pal integration - uservoice integration - ability to put under my svn would be nice too EDIT Thanks to the responders. I understand now why my original searches failed. I was not searching for "CMS". I'll go back and do that. I would expect that this is a many-times-duplicate... EDIT: I am considering using Wordpress and Drupal - one for each of the sites. I did one Drupal site quickly just so I could qualify for one of the Microsoft programs for discounted dev tools - anyway - it was a quick and dirty homepage and I am still on the learning curve. I look forward to playing with it. So far it has been ok. I am not sure about doing a taste-test between the two - might be a waste of time where I could just become that much better at Drupal faster than spending time on wordpress... Will keep updated. EDIT: Selecting the Drupal answer by slim for now. That is what I am going with. Don't have time to check them all out. Wordpress sounds like a good option too, but such limited time... Results: I have tried wordpress and drupal so far. Wordpress is great for blogging or for a site that you want to run ads from, but I disagree that it is ready for a corporate site, unless you want to spend lots of time making your own theme, etc. But if you spend that time, why not work with drupal? Drupal was a little intimidating at first - but after spending about 4 hours reading the overview and step-by-step guide online was a HUGE step. I got a simple site up and running easily after that. Trying to make a website just by going to the admin panel without reading anything is a waste of time. You really need to read the docs. The site is great. start here: http://drupal.org/getting-started I'd suggest drupal to anyone. It has amazing capabilities, lots of support and lots of users. Just doing blogging? Wordpress is really great for that. So now I've got two sites running with a lot of the functionality I wanted - and they look good. ONE MORE EDIT Well, I have switched back to wordpress after buying a theme and then getting help from web developers. I guess either one will work - it is just a matter of getting comfortable witht he basics, using the right tools and trying things out.

Read the article

C# LINQ XML Query with duplicate element names that have attributes

- by ncain187

<Party id="Party_1"> <PartyTypeCode tc="1">Person</PartyTypeCode> <FullName>John Doe</FullName> <GovtID>123456789</GovtID> <GovtIDTC tc="1">Social Security Number US</GovtIDTC> <ResidenceState tc="35">New Jersey</ResidenceState> <Person> <FirstName>Frank</FirstName> <MiddleName>Roberts</MiddleName> <LastName>Madison</LastName> <Prefix>Dr.</Prefix> <Suffix>III</Suffix> <Gender tc="1">Male</Gender> <BirthDate>1974-01-01</BirthDate> <Age>35</Age> <Citizenship tc="1">United States of America</Citizenship> </Person> <Address> <AddressTypeCode tc="26">Bill Mailing</AddressTypeCode> <Line1>2400 Meadow Lane</Line1> <Line2></Line2> <Line3></Line3> <Line4></Line4> <City>Somerset</City> <AddressStateTC tc="35">New Jersey</AddressStateTC> <Zip>07457</Zip> <AddressCountryTC tc="1">United States of America</AddressCountryTC> </Address> </Party>    <Party id="Party_2"> <PartyTypeCode tc="1">Person</PartyTypeCode> <FullName>Dollie Robert Madison</FullName> <GovtID>123956239</GovtID> <GovtIDTC tc="1">Social Security Number US</GovtIDTC> <Person> <FirstName>Dollie</FirstName> <MiddleName>R</MiddleName> <LastName>Madison</LastName> <Suffix>III</Suffix> <Gender tc="2">Female</Gender> <BirthDate>1996-10-12</BirthDate> <Citizenship tc="1">United States of America</Citizenship> </Person>  <Address> <AddressTypeCode tc="26">Bill Mailing</AddressTypeCode> <Line1>2400 Meadow Lane</Line1> <City>Somerset</City> <AddressStateTC tc="35">New Jersey</AddressStateTC> <Zip>07457</Zip> <AddressCountryTC tc="1">United States of America</AddressCountryTC> </Address> <Risk>  <DisabilityEffectiveStartDate>2006-01-01</DisabilityEffectiveStartDate>  <DisabilityEffectiveStopDate>2008-01-01</DisabilityEffectiveStopDate> </Risk> </Party>    <Party id="Party_3"> <PartyTypeCode tc="2">Organization</PartyTypeCode> <Organization> <DTCCMemberCode>1234</DTCCMemberCode> </Organization> <Carrier> <CarrierCode>105</CarrierCode> </Carrier> </Party> Here is my code which doesn't work because party 3 doesn't contain FullName, I know that partyelements contains 3 parties if I only return the name attribute. Is there a way to loop through each tag seperate? var partyElements = from party in xmlDoc.Descendants("Party") select new { Name = party.Attribute("id").Value, PartyTypeCode = party.Element("PartyTypeCode").Value, FullName = party.Element("FullName").Value, GovtID = party.Element("GovtID").Value, };

Read the article

unable to update gridview

- by bhakti

Please help ,i have added update/edit command button in gridview so to update data in my sql server database but am unable to do it. Data is not updated in database . ======code for onrowupdate======================================== protected void gRowUpdate(object sender, GridViewUpdateEventArgs e) { Books b = null; b = new Books(); DataTable dt=null; GridView g = (GridView)sender; try { dt=new DataTable(); b = new Books(); b.author = Convert.ToString(g.Rows[e.RowIndex].FindControl("Author")); b.bookID = Convert.ToInt32(g.Rows[e.RowIndex].FindControl("BookID")); b.title = Convert.ToString(g.Rows[e.RowIndex].FindControl("Title")); b.price = Convert.ToDouble(g.Rows[e.RowIndex].FindControl("Price")); // b.rec = Convert.ToString(g.Rows[e.RowIndex].FindControl("Date_of_reciept")); b.ed = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.bill = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.cre_by = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.src = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.pages = Convert.ToInt32(g.Rows[e.RowIndex].FindControl("Edition")); b.pub = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.mod_by = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.remark = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); // b.year = Convert.ToString(g.Rows[e.RowIndex].FindControl("Edition")); b.updatebook(b); g.EditIndex = -1; dt = b.GetAllBooks(); g.DataSource = dt; g.DataBind(); } catch (Exception ex) { throw (ex); } finally { b = null; } } ===================My stored procedure for update book able to update database by exec in sqlserver mgmt studio========================== set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go ALTER PROCEDURE [dbo].[usp_updatebook] @bookid bigint, @author varchar(50), @title varchar(50), @price bigint, @src_equisition varchar(50), @bill_no varchar(50), @publisher varchar(50), @pages bigint, @remark varchar(50), @edition varchar(50), @created_by varchar(50), @modified_by varchar(50) /*@date_of_reciept datetime, @year_of_publication datetime*/ AS declare @modified_on datetime set @modified_on=getdate() UPDATE books SET author=@author, title=@title, price=@price, src_equisition=@src_equisition, bill_no=@bill_no, publisher=@publisher, /*Date_of_reciept=@date_of_reciept,*/ pages=@pages, remark=@remark, edition=@edition, /*Year_of_publication=@year_of_publication,*/ created_by=@created_by, modified_on=@modified_on, modified_by=@modified_by WHERE bookid=@bookid ========================class library function for update==================== public void updatebook(Books b) { DataAccess dbAccess = null; SqlCommand cmd = null; try { dbAccess = new DataAccess(); cmd = dbAccess.GetSQLCommand("usp_updatebook", CommandType.StoredProcedure); cmd.Parameters.Add("@bookid", SqlDbType.VarChar, 50).Value = b.bookID; cmd.Parameters.Add("@author", SqlDbType.VarChar, 50).Value = b.author; cmd.Parameters.Add("@title", SqlDbType.VarChar, 50).Value = b.title; cmd.Parameters.Add("@price", SqlDbType.Money).Value = b.price; cmd.Parameters.Add("@publisher", SqlDbType.VarChar, 50).Value = b.pub; // cmd.Parameters.Add("@year_of_publication", SqlDbType.DateTime).Value =Convert.ToDateTime( b.year); cmd.Parameters.Add("@src_equisition", SqlDbType.VarChar, 50).Value = b.src; cmd.Parameters.Add("@bill_no", SqlDbType.VarChar, 50).Value = b.bill; cmd.Parameters.Add("@remark", SqlDbType.VarChar, 50).Value = b.remark; cmd.Parameters.Add("@pages", SqlDbType.Int).Value = b.pages; cmd.Parameters.Add("@edition", SqlDbType.VarChar, 50).Value = b.ed; // cmd.Parameters.Add("@date_of_reciept", SqlDbType.DateTime).Value = Convert.ToDateTime(b.rec); // cmd.Parameters.Add("@created_on", SqlDbType.DateTime).Value = Convert.ToDateTime(b.cre_on); cmd.Parameters.Add("@created_by", SqlDbType.VarChar, 50).Value = b.cre_by; //cmd.Parameters.Add("@modified_on", SqlDbType.DateTime).Value = Convert.ToDateTime(b.mod_on); cmd.Parameters.Add("@modified_by", SqlDbType.VarChar, 50).Value = b.mod_by; cmd.ExecuteNonQuery(); } catch (Exception ex) { throw (ex); } finally { if (cmd.Connection != null && cmd.Connection.State == ConnectionState.Open) cmd.Connection.Close(); dbAccess = null; cmd = null; } } I have also tried to do update by following way protected void gv1_updating(object sender, GridViewUpdateEventArgs e) { GridView g = (GridView)sender; abc a = new abc(); DataTable dt = new DataTable(); try { a.cd_Id = Convert.ToInt32(g.DataKeys[e.RowIndex].Values[0].ToString()); //TextBox b = (TextBox)g.Rows[e.RowIndex].Cells[0].FindControl("cd_id"); TextBox c = (TextBox)g.Rows[e.RowIndex].Cells[2].FindControl("cd_name"); TextBox d = (TextBox)g.Rows[e.RowIndex].Cells[3].FindControl("version"); TextBox f = (TextBox)g.Rows[e.RowIndex].Cells[4].FindControl("company"); TextBox h = (TextBox)g.Rows[e.RowIndex].Cells[6].FindControl("created_by"); TextBox i = (TextBox)g.Rows[e.RowIndex].Cells[8].FindControl("modified_by"); //a.cd_Id = Convert.ToInt32(b.Text); a.cd_name = c.Text; a.ver = d.Text; a.comp = f.Text; a.cre_by = h.Text; a.mod_by = i.Text; a.updateDigi(a); g.EditIndex = -1; dt = a.GetAllDigi(); g.DataSource = dt; g.DataBind(); } catch(Exception ex) { throw (ex); } finally { dt = null; a = null; g = null; } } =================== but have error of Index out of range exception========= please do reply,thanxs in advance

Read the article

jQuery returning two elements for each one it finds?

- by John Rudy

I'll start by saying I'm fairly new to jQuery. For the most part, I've found it intuitive and powerful, but this one circumstance has me thoroughly stumped. In the following method, the call to .each() returns two elements for every one found. It iterates over a set of table rows given IDs starting with the word, "communication," and followed by an ID number. For each row it returns, it processes twice. Using Firebug, I've validated that the DOM only has a single instance of each table row in question. Also using Firebug, I've validated that the method is not being called twice; the iteration in .each() is truly going over each returned table row twice. By the time all the AJAX call goodness is done, I'll have two entries in the database for each row created in the table. This is the code that's causing the issues: function getCommunications() { var list = $('[id^=communication]'); var communications = new Array(); list.each(function () { var communication = { ID: $(this).find('.commCompanyID').val(), /* * SNIP: more object properties here that are * unnecessary to this discussion */ }; communications.push(communication); }); return communications; } At the point of return communications, the Array returned will contain twice as many elements as there are table rows. I should note that nearly identical code (but going against specific lists of divs) is working on the same page. It's just the table that's suffering the issues. I'm using jQuery 1.4.1, the version which shipped with Visual Studio .NET 2010. The table markup is fully dynamic -- that is, aside from the header row, it's dependent on data either returned at page load or created by the user via a dialog box. I'll drop in just the code for what's created at page load; again using Firebug I've validated that what I create dynamically when an end user creates a row with the dialog box matches. (This should be readable by anyone, but for the record this is an ASP.NET MVC 2.0 project.) <table id="commTable"> <tr> <th></th> <th> Date / Time </th> <th> Contact </th> <th> Type </th> <th> Duration </th> <th> Notes </th> </tr> <% foreach (var item in Model) { %> <tr id="communication<%: item.ID %>"> <td> <a href="#" onclick="showEditCommunicationForm(<%: item.ID %>"> Edit</a> <span class="commDeleteButton"> <a href="#" onclick="deleteCommunication(<%: item.ID %>)"> Delete</a> </span> </td> <td> <span class="commDateTime"><%: item.DateTime %></span> <input type="hidden" class="commID" value="<%: item.ID %>" /> <input type="hidden" class="commIsDeleted" value="<%: item.IsDeleted %>" /> </td> <td> <span class="commSourceText"><%: item.Company.CompanyName %></span> <input type="hidden" class="commCompanyID" value="<%: item.CompanyID %>" /> </td> <td> <%: item.CommunicationType.CommunicationTypeText %> <input type="hidden" class="commTypeID" value="<%: item.CommunicationTypeID %>" /> </td> <td> <span class="commDuration"><%: item.DurationMinutes %></span> Minutes </td> <td> <span class="commNotes"><%: item.Notes %></span> </td> </tr> <% } %> </table>

Read the article

How do I make a simple image-based button with visual states in Silverlight 3?

- by Jacob

At my previous company, we created our RIAs using Flex with graphical assets created in Flash. In Flash, you could simply lay out your graphics for different states, i.e. rollover, disabled. Now, I'm working on a Silverlight 3 project. I've been given a bunch of images that need to serve as the graphics for buttons that have a rollover, pressed, and normal state. I cannot figure out how to simply create buttons with different images for different visual states in Visual Studio 2008 or Expression Blend 3. Here's where I am currently. My button is defined like this in the XAML: <Button Style="{StaticResource MyButton}"/> The MyButton style appears as follows: <Style x:Key="MyButton" TargetType="Button"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="Button"> <Image Source="/Assets/Graphics/mybtn_up.png" Width="54" Height="24"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="FocusStates"> <VisualState x:Name="Focused"/> <VisualState x:Name="Unfocused"/> </VisualStateGroup> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="Normal"/> <VisualState x:Name="MouseOver"/> <VisualState x:Name="Pressed"/> <VisualState x:Name="Disabled"/> </VisualStateGroup> </VisualStateManager.VisualStateGroups> </Image> </ControlTemplate> </Setter.Value> </Setter> </Style> I cannot figure out how to assign a different template to different states, nor how to change the image's source based on which state I'm in. How do I do this? Also, if you know of any good documentation that describes how styles work in Silverlight, that would be great. All of the search results I can come up with are frustratingly unhelpful. Edit: I found a way to change the image via storyboards like this: <Style x:Key="MyButton" TargetType="Button"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="Button"> <Image Source="/Assets/Graphics/mybtn_up.png" Width="54" Height="24" x:Name="Image"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="FocusStates"> <VisualState x:Name="Focused"/> <VisualState x:Name="Unfocused"/> </VisualStateGroup> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="Normal"/> <VisualState x:Name="MouseOver"> <Storyboard Storyboard.TargetName="Image" Storyboard.TargetProperty="Source"> <ObjectAnimationUsingKeyFrames> <DiscreteObjectKeyFrame KeyTime="0" Value="/Assets/Graphics/mybtn_over.png"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Pressed"> <Storyboard Storyboard.TargetName="Image" Storyboard.TargetProperty="Source"> <ObjectAnimationUsingKeyFrames> <DiscreteObjectKeyFrame KeyTime="0" Value="/Assets/Graphics/mybtn_active.png"/> </ObjectAnimationUsingKeyFrames> </Storyboard> </VisualState> <VisualState x:Name="Disabled"/> </VisualStateGroup> </VisualStateManager.VisualStateGroups> </Image> </ControlTemplate> </Setter.Value> </Setter> </Style> However, this seems like a strange way of doing things to me. Is there a more standard way of accomplishing this?

Read the article

Ruby number_to_currency displays a totally wrong number!

- by SueP

Greetings! I’m an old Delphi programmer making the leap to the Mac, Ruby, Rails, and web programming in general. I’m signed up for the Advanced Rails workshop at the end of the month. In the meantime, I’ve been working on porting a mission-critical (of course) app from Delphi to RAILS. It feels like I’ve spent most of the past year with my head buried in a book or podcast. Right now, I’ve hit a major issue and I’m tearing my hair out. I literally don’t know where to go with this, I desperately don’t want to deploy with this bug, and I’m feeling a bit frantic. (The company database is currently running on an ancient XP box that’s looking rustier by the day.) So, I set up a test database that shows the problem. I’m running: OS/X 10.6.3 Rails 2.3.5 ruby 1.8.7 (2009-06-08 patchlevel 173) [universal-darwin10.0] MySQL 5.1.38-log via socket MySQL Client Version 5.1.8 ActiveRecord::Schema.define(:version => 20100406222528) do create_table “money”, :force => true do |t| t.decimal “amount_due”, :precision => 10, :scale => 2, :default => 0.0 t.decimal “balance”, :precision => 10, :scale => 2, :default => 0.0 t.text “memofield” t.datetime “created_at” t.datetime “updated_at” end The index view is right out of the generator, slightly modified to add the formatting that's breaking on me. Listing money <table> <tr> <th>Amount</th> <th>Amount to_s </th> <th>Balance to $</th> <th>Balance with_precision </th> <th>Memofield</th> </tr> <% @money.each do |money| %> <tr> <td><%=h money.amount_due %></td> <td><%=h money.amount_due.to_s(‘F’) %></td> <td><%=h number_to_currency(money.balance) %></td> <td><%=h number_with_precision(money.balance, :precision => 2) %></td> <td><%=h money.memofield %></td> <td><%= link_to ‘Show’, money %></td> <td><%= link_to ‘Edit’, edit_money_path(money) %></td> <td><%= link_to ‘Destroy’, money, :confirm => ‘Are you sure?’, :method => :delete %></td> </tr> *<% end %> *</table> <%= link_to ‘New money’, new_money_path %> This seemed to work pretty well. Then I started testing with production data and hit a major problem with number_to_currency. The number in the database is: 10542.28, I verified it with the MySQL Query Browser. RAILS will display this as 10542.28 unless I call number_to_currency, then that number is displayed as: $15422.80 The error seems to happen with any number between 10,000.00 and 10,999.99 So far, I haven’t seen it outside of that range, but I obviously haven’t tested everything. I guess my workaround is to remove number_to_currency, but that leaves the views looking really sloppy and unprofessional. The formatting is messed up, things don’t line up properly and I can’t force the display to 2 decimal places. I’m seriously hoping there is an easy fix for this. I can’t imagine this being a widespread problem. It would affect so many people that someone would have fixed it! But I don’t know where to go from here. I’d desperately like some help. (Later – number_with_precision fails the same way number_to_currency does.) Sue Petersen

Read the article

Service injection into Controller (Spring MVC)

- by ThaSaleni

Hi I have a Spring web application, I have built it up to the controller stage and I could inject my Daos, into my Services fine. Now when I want to inject my Service into my controller i get an error for dependency with the Dao and further down the sessionFactory. I don't want to inject these again cause this will ultimately lead me to eventually create a data source but I have my Daos for data access and they already know about sessionFactory. Am I missing something here? here's the sample code snippets My Service: @Service("productService") @Transactional public class ProductServiceImpl implements ProductService { private ProductDao productDao; @Autowired public void setDao(ProductDao productDao) { this.productDao = productDao; } My Controller @Controller @WebServlet(name="controllerServlet", loadOnStartup= urlPatterns=...}) public class ControllerServlet extends HttpServlet { boolean isUserLogedIn =false; @Autowired private ProductService productService; public void setProductService(ProductService productService){ this.productService = productService; } Servlet-context Stack trace javax.servlet.ServletException: Servlet.init() for servlet mvcServlet threw exception org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:472) org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98) org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:927) org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:407) org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:999) org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java: 565) org.apache.tomcat.util.net.AprEndpoint$SocketProcessor.run(AprEndpoint.java:1812) java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886) java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908) java.lang.Thread.run(Thread.java:662) root cause org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'controllerServlet': Injection of autowired dependencies failed; nested exception is org.springframework.beans.factory.BeanCreationException: Could not autowire field: private com.phumzile.acme.services.ProductService com.phumzile.acme.client.web.controller.ControllerServlet.productService; nested exception is org.springframework.beans.factory.NoSuchBeanDefinitionException: No matching bean of type [com.phumzile.acme.services.ProductService] found for dependency: expected at least 1 bean which qualifies as autowire candidate for this dependency. Dependency annotations: {@org.springframework.beans.factory.annotation.Autowired(required=true)} org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.p ostProcessPropertyValues(AutowiredAnnotationBeanPostProcessor.java:287) org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1106) org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:517) org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456) org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294) org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225) SERVLET-CONTEXT <context:component-scan base-package="com.phumzile.acme.client" />  <mvc:annotation-driven /> </beans> APP-CONFIG <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer"> <property name="locations"> <list> <value>configuration.properties</value> </list> </property> </bean> <context:annotation-config/> <context:component-scan base-package="com.phumzile.acme" /> <import resource="db-config.xml" /> </beans> DB-CONFIG <bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close"> <property name="idleConnectionTestPeriod" value="10800"/> <property name="maxIdleTime" value="21600"/> <property name="driverClass"> <value>${jdbc.driver.className}</value> </property> <property name="jdbcUrl"> <value>${jdbc.url}</value> </property> <property name="user"> <value>${jdbc.username}</value> </property> <property name="password"> <value>${jdbc.password}</value> </property> </bean> <bean id="sessionFactory" class="org.springframework.orm.hibernate3.a nnotation.AnnotationSessionFactoryBean"> <property name="dataSource"> <ref bean="dataSource" /> </property> <property name="annotatedClasses"> <list>  <value>com.phumzile.acme.model.User</value> <value>com.phumzile.acme.model.Person</value> <value>com.phumzile.acme.model.Company</value> <value>com.phumzile.acme.model.Product</value> <value>com.phumzile.acme.model.Game</value> <value>com.phumzile.acme.model.Book</value>  </list> </property> <property name="packagesToScan" value="com.phumzile.acme" /> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">${jdbc.hibernate.dialect </prop> <prop key="hibernate.hbm2ddl.auto">validate</prop> <prop key="hibernate.show_sql">true</prop> </props> </property> </bean> <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager"> <property name="sessionFactory"> <ref bean="sessionFactory" /> </property> </bean> <tx:annotation-driven /> </beans> CONFIGURATION.PROPERTIES jdbc.driver.className=com.mysql.jdbc.Driver jdbc.url=jdbc:mysql://localhost:3306/mydb jdbc.username=root jdbc.password=root jdbc.hibernate.dialect=org.hibernate.dialect.MySQLDialect

Read the article

Work time in fullcalendar [Solution]

- by Zozo

Full calendar have no included options to work-time feature (selecting first and last rows in agenda view for any day - where in example company is not working). I managed something like that: viewDisplay: function(view){ $.ajax({ url: 'index.php?r=calendar/Default/worktime', dataType: 'json', success: function(data){ if(view.name=='agendaWeek') selectWorkTime(data, 30, 0, 24, false); else if(view.name=='agendaDay') selectDayWorkTime(data, 30, 0, 24, view, false); } }); } Where index.php?r=calendar/Default/worktime is php file returning json. It looks like that: $arr = array( 'mon' => array('8:00', '17:00'), 'tue' => array('9:00', '15:00'), 'wed' => array('9:30', '19:00'), 'thu' => array('6:00', '14:00'), 'fri' => array('0:00', '24:00'), 'sat' => array('9:00', '14:00'), 'sun' => array() ); foreach ($arr as &$day){ foreach($day as &$hour){ $tmp = explode(':', $hour); $hour = $tmp[0] * 3600 + $tmp[1] * 60; } } print json_encode($arr); and at the end, some functions using for counting and selecting work-time: function selectDayWorkTime(timeArray, slotMinutes, minTime, maxTime, viewObject, showAtHolidays){ var dayname; $('.fc-content').find('.fc-view-agendaWeek').find('.fc-agenda-body') .children('.fc-work-time').remove(); $('.fc-content').find('.fc-view-agendaDay') .find('.fc-work-time-day').removeClass('fc-work-time-day'); switch(viewObject.start.getDay()){ case 1: dayname='mon'; break; case 2: dayname='tue'; break; case 3: dayname='wed'; break; case 4: dayname='thu'; break; case 5: dayname='fri'; break; case 6: dayname='sat'; break; case 0: dayname='sun'; break; } for(var day in timeArray){ if(day == dayname){ if($('.fc-content').find('.fc-view-agendaDay').find('.fc-'+day).attr('class').search('fc-holiday') == -1 || showAtHolidays){ var startBefore = 0; var endBefore = timeArray[day][0] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var startAfter = timeArray[day][1] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var endAfter = (maxTime - minTime) * 60 / slotMinutes - 1; for(startBefore; startBefore < endBefore; startBefore++){ $('.fc-view-agendaDay').find('.fc-slot'+startBefore).find('div').addClass('fc-work-time-day'); } for(startAfter; startAfter <= endAfter; startAfter++){ $('.fc-view-agendaDay').find('.fc-slot'+startAfter).find('div').addClass('fc-work-time-day'); } } } } } function selectWorkTime(timeArray, slotMinutes, minTime, maxTime, showAtHolidays){ for(var day in timeArray){ var startBefore = 0; var endBefore = timeArray[day][0] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var startAfter = timeArray[day][1] / (60 * slotMinutes) - (minTime * 60) / slotMinutes; var endAfter = (maxTime - minTime) * 60 / slotMinutes - 1; if(startBefore > endBefore) endBefore = startBefore; if(startAfter > endAfter) startAfter = endAfter; try{ selectCell(startBefore, endBefore, 'fc-'+day, 'fc-work-time', false, showAtHolidays); selectCell(startAfter, endAfter, 'fc-'+day, 'fc-work-time', true, showAtHolidays); } catch(e){ continue; } } } function selectCell(startRowNo, endRowNo, collClass, cellClass, closeGap, showAtHolidays){ $('.fc-content').find('.fc-view-agendaWeek').find('.fc-agenda-body') .children('.'+cellClass+''+startRowNo+''+collClass).remove(); $('.fc-content').find('.fc-view-agendaDay') .find('.fc-work-time-day').removeClass('fc-work-time-day'); if($('.fc-content').find('.fc-view-agendaWeek').find('.'+collClass).attr('class').search('fc-holiday') == -1 || showAtHolidays){ var width = $('.fc-content').find('.fc-view-agendaWeek') .find('.'+collClass+':last').width(); var height = 0; if(closeGap && (startRowNo != endRowNo)){ height = $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ startRowNo).height(); } $('.fc-view-agendaWeek').find('.fc-agenda-body').prepend('<div class="'+cellClass+' ' + ''+cellClass+''+startRowNo+''+collClass+'"></div>'); $('.'+cellClass).width(width - 2); height += $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ endRowNo).position().top - $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ startRowNo).position().top; $('.'+cellClass+''+startRowNo+''+collClass).height(height); $('.'+cellClass+''+startRowNo+''+collClass) .css('margin-top', $('.fc-content').find('.fc-view-agendaWeek') .find('.fc-slot'+ startRowNo).position().top); $('.'+cellClass+''+startRowNo+''+collClass) .css('margin-left', $('.fc-content').find('.fc-view-agendaWeek') .find('.'+collClass+':last').offset().left - width / 2); } } Don't forget about CSS: .fc-work-time-day{ background-color: yellow; opacity: 0.3; filter: alpha(opacity=30); /* for IE */ } .fc-work-time{ position: absolute; background-color: yellow; z-index:10; margin: 0; padding: 0; text-align: left; z-index: 0; opacity: 0.3; filter: alpha(opacity=30); /* for IE */ } So, I've got some questions about - is the other way to make the same, but no using absolute div's in agendaWeek? And... How can I get in viewDisplay function actual slotMinutes, minTime and maxTime

Read the article

Update table rows in a non-sequential way using the output of a php script

- by moviemaniac

Good evening everybody, this is my very first question and I hope I've done my search in stack's archive at best!!! I need to monitor several devices by querying theyr mysql database and gather some informations. Then these informations are presented to the operator in an html table. I have wrote a php script wich loads devices from a multidimensional array, loops through the array and gather data and create the table. The table structure is the following: <table id="monitoring" class="rt cf"> <thead class="cf"> <tr> <th>Device</th> <th>Company</th> <th>Data1</th> <th>Data2</th> <th>Data3</th> <th>Data4</th> <th>Data5</th> <th>Data6</th> <th>Data7</th> <th>Data8</th> <th>Data9</th> </tr> </thead> <tbody> <tr id="Device1"> <td>Devide 1 name</td> <td>xx</td> <td><img src="/path_to_images/ajax_loader.gif" width="24px" /></td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> </tr> <tr id="Device2"> <td>Devide 1 name</td> <td>xx</td> <td><img src="/path_to_images/ajax_loader.gif" width="24px" /></td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> </tr> <tr id="DeviceN"> <td>Devide 1 name</td> <td>xx</td> <td><img src="/path_to_images/ajax_loader.gif" width="24px" /></td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> <td> </td> </tr> </tbody> </table> The above table is directly populated when I first load the page; then, with a very simple function, i update this table every minute without reloading the page: <script> var auto_refresh = setInterval( function() { jQuery("#monitoring").load('/overview.php').fadeIn("slow"); var UpdateTime= new Date(); var StrUpdateTime; StrUpdateTime= ('0' + UpdateTime.getHours()).slice(-2) + ':' + ('0' + UpdateTime.getMinutes()).slice(-2) + ':' + ('0' + UpdateTime.getSeconds()).slice(-2); jQuery("#progress").text("Updated on: " + StrUpdateTime); }, 60000); </script> The above code runs in a wordpress environment. It comes out that when devices are too much and internet connection is not that fast, the script times out, even if i dramatically increase the timeout period. So it is impossible even to load the page the first time... Therefore I would like to change my code so that I can handle each row as a single entity, with its own refresh period. So when the user first loads the page, he sees n rows (one per device) with the ajax loader image... then an update cycle should start independently for each row, so that the user sees data gathered from each database... then ajax loader when the script is trying to retrieve data, then the gathered data once it has been collected or an error message stating that it is not possible to gather data since hour xx:yy:zz. So rows updating should be somewhat independent from the others, like if each row updating was a single closed process. So that rows updating is not done sequentially from the first row to the last. I hope I've sufficiently detailed my problem. Currently I feel like I am at a dead-end. Could someone please show me somewhere to start from?

Read the article

modalpopupextender.Show() wont fire

- by Peter Lea

I'm pretty new to developing for the web so bare with me. I have a company page with multiple locations and emails etc at each of these addresses. The idea is to have a single modalpopup to edit each type of data (one for email, one for urls, one for addresses etc). I link the modalpopupextender to a hiddenbutton and then call an edit function from various places where I can populate some hiddenfields and textboxes in the panel before showing it. The code executes but it just wont show the damn popup, I just see a flash and can't figure out if its my panel, my css or something I don't understand about ajax and postbacks etc. Things i've tried after reading various threads: Disable smart navigation in web.config Move ToolKitScriptManager up to master page and use proxy in content set hiddenbutton to use style="display:none" tried links etc instead of hidden button Heres my code CSS .modalBackground { position: absolute; z-index: 100; top: 0px; left: 0px; background-color: #000; filter: alpha(opacity=60); -moz-opacity: 0.6; opacity: 0.6; } .modalPopup { background-color: #FFD; border-width: 3px; border-style: solid; border-color: gray; padding: 3px;} Asp/html <ajaxToolkit:ModalPopupExtender runat="server" ID="mpe_email" BackgroundCssClass="modalBackground" PopupControlID="modal_email" CancelControlID="btn_cancel_email" TargetControlID="fake_btn_email" /> <asp:Button ID="fake_btn_email" runat="server" Text="email" style="display:none;" /> <asp:panel id="modal_email" runat="server" class="modalPopup" Width="500px" Height="500px"> <asp:HiddenField ID="hf_modal_email_location_id" runat="server" Value="" /> <asp:HiddenField ID="hf_modal_email_contact_id" runat="server" Value="" /> <asp:HiddenField ID="hf_modal_email_comms_id" runat="server" Value="" /> <table width="100%"> <tr> <td> <asp:Label ID="lbl_mpe_email_title" runat="server" Text="Edit Email Address" /> </td> </tr> <tr> <td> <table width="100%"> <tr> <td width="40px"><img src="../images/email.png" height="30px" width="30px"/></td> <td> <table width="100px"> <tr> <td><span>Quick Ref: <asp:TextBox ID="txb_mpe_email_qref" runat="server" Text="" /></span></td> </tr> <tr> <td><span>Email Address: <asp:TextBox ID="txb_mpe_email_address_full" runat="server" Text="" /></span></td> </tr> </table> </td> </tr> </table> </td> </tr> <tr> <td width="40px" align="left"><asp:Button ID="btn_cancel_email" runat="server" Text="Cancel"/></td> <td align="right"><asp:Button ID="btn_save_email" runat="server" Text="Save" OnCommand="save_modal_email" /></td> </tr> <tr> <td colspan="2" align="right"><asp:Label ID="lbl_mpe_email_err" runat="server" Text="" /></td> </tr> </table> c# public void oloc_ocon_email_edit(object sender, RepeaterCommandEventArgs e) { switch (e.CommandName) { case "edit": hf_modal_email_location_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_location_id")).Value; hf_modal_email_contact_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_contact_id")).Value; hf_modal_email_comms_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_comms_id")).Value; lbl_mpe_email_title.Text = "Edit Email Address"; txb_mpe_email_qref.Text = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_qref")).Value; txb_mpe_email_address_full.Text = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_email_full")).Value; lbl_mpe_email_err.Text = ""; mpe_email.Show(); break; case "new": hf_modal_email_location_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_location_id_p")).Value; hf_modal_email_contact_id.Value = ((HiddenField)e.Item.FindControl("hf_oloc_ocon_emails_contact_id_p")).Value; hf_modal_email_comms_id.Value = "0"; lbl_mpe_email_title.Text = "New Email Address"; txb_mpe_email_qref.Text = ""; txb_mpe_email_address_full.Text = ""; lbl_mpe_email_err.Text = ""; mpe_email.Show(); break; } } Stuff makes so much more sense in a desktop environment, I hope someone can point me in the right direction. Thanks

Read the article

PHP Export Date range

- by menormedia

I have a working database export to xls but I need it to export a particular date range based on the 'closed' date. (See code below). For example, I'd like it to export all 'closed' dates for last month and/or this month (Range: Sept 1, 2012 to Sept 30, 2012 or Oct 1, 2012 to Oct 31, 2012) <?PHP //EDIT YOUR MySQL Connection Info: $DB_Server = "localhost"; //your MySQL Server $DB_Username = "root"; //your MySQL User Name $DB_Password = ""; //your MySQL Password $DB_DBName = "ost_helpdesk"; //your MySQL Database Name $DB_TBLName = "ost_ticket"; //your MySQL Table Name //$DB_TBLName, $DB_DBName, may also be commented out & passed to the browser //as parameters in a query string, so that this code may be easily reused for //any MySQL table or any MySQL database on your server //DEFINE SQL QUERY: //edit this to suit your needs $sql = "Select ticketID, name, company, subject, closed from $DB_TBLName ORDER BY closed DESC"; //Optional: print out title to top of Excel or Word file with Timestamp //for when file was generated: //set $Use_Titel = 1 to generate title, 0 not to use title $Use_Title = 1; //define date for title: EDIT this to create the time-format you need $now_date = DATE('m-d-Y'); //define title for .doc or .xls file: EDIT this if you want $title = "MDT Database Dump For Table $DB_TBLName from Database $DB_DBName on $now_date"; /* Leave the connection info below as it is: just edit the above. (Editing of code past this point recommended only for advanced users.) */ //create MySQL connection $Connect = @MYSQL_CONNECT($DB_Server, $DB_Username, $DB_Password) or DIE("Couldn't connect to MySQL:<br>" . MYSQL_ERROR() . "<br>" . MYSQL_ERRNO()); //select database $Db = @MYSQL_SELECT_DB($DB_DBName, $Connect) or DIE("Couldn't select database:<br>" . MYSQL_ERROR(). "<br>" . MYSQL_ERRNO()); //execute query $result = @MYSQL_QUERY($sql,$Connect) or DIE("Couldn't execute query:<br>" . MYSQL_ERROR(). "<br>" . MYSQL_ERRNO()); //if this parameter is included ($w=1), file returned will be in word format ('.doc') //if parameter is not included, file returned will be in excel format ('.xls') IF (ISSET($w) && ($w==1)) { $file_type = "msword"; $file_ending = "doc"; }ELSE { $file_type = "vnd.ms-excel"; $file_ending = "xls"; } //header info for browser: determines file type ('.doc' or '.xls') HEADER("Content-Type: application/$file_type"); HEADER("Content-Disposition: attachment; filename=MDT_DB_$now_date.$file_ending"); HEADER("Pragma: no-cache"); HEADER("Expires: 0"); /* Start of Formatting for Word or Excel */ IF (ISSET($w) && ($w==1)) //check for $w again { /* FORMATTING FOR WORD DOCUMENTS ('.doc') */ //create title with timestamp: IF ($Use_Title == 1) { ECHO("$title\n\n"); } //define separator (defines columns in excel & tabs in word) $sep = "\n"; //new line character WHILE($row = MYSQL_FETCH_ROW($result)) { //set_time_limit(60); // HaRa $schema_insert = ""; FOR($j=0; $j<mysql_num_fields($result);$j++) { //define field names $field_name = MYSQL_FIELD_NAME($result,$j); //will show name of fields $schema_insert .= "$field_name:\t"; IF(!ISSET($row[$j])) { $schema_insert .= "NULL".$sep; } ELSEIF ($row[$j] != "") { $schema_insert .= "$row[$j]".$sep; } ELSE { $schema_insert .= "".$sep; } } $schema_insert = STR_REPLACE($sep."$", "", $schema_insert); $schema_insert .= "\t"; PRINT(TRIM($schema_insert)); //end of each mysql row //creates line to separate data from each MySQL table row PRINT "\n----------------------------------------------------\n"; } }ELSE{ /* FORMATTING FOR EXCEL DOCUMENTS ('.xls') */ //create title with timestamp: IF ($Use_Title == 1) { ECHO("$title\n"); } //define separator (defines columns in excel & tabs in word) $sep = "\t"; //tabbed character //start of printing column names as names of MySQL fields FOR ($i = 0; $i < MYSQL_NUM_FIELDS($result); $i++) { ECHO MYSQL_FIELD_NAME($result,$i) . "\t"; } PRINT("\n"); //end of printing column names //start while loop to get data WHILE($row = MYSQL_FETCH_ROW($result)) { //set_time_limit(60); // HaRa $schema_insert = ""; FOR($j=0; $j<mysql_num_fields($result);$j++) { IF(!ISSET($row[$j])) $schema_insert .= "NULL".$sep; ELSEIF ($row[$j] != "") $schema_insert .= "$row[$j]".$sep; ELSE $schema_insert .= "".$sep; } $schema_insert = STR_REPLACE($sep."$", "", $schema_insert); //this corrects output in excel when table fields contain \n or \r //these two characters are now replaced with a space $schema_insert = PREG_REPLACE("/\r\n|\n\r|\n|\r/", " ", $schema_insert); $schema_insert .= "\t"; PRINT(TRIM($schema_insert)); PRINT "\n"; } } ?>

Read the article

Maven : Is it possible to override the configuration of a plugin already defined for a profile in a parent POM

- by Guillaume Cernier

In a POM parent file of my project, I have such a profile defining some configurations useful for this project (so that I can't get rid of this parent POM) : <profile> <id>wls7</id> ... <build> <plugins>  <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <configuration> <fork>true</fork> <source>1.4</source> <target>1.4</target> <meminitial>128m</meminitial> <maxmem>1024m</maxmem> <executable>%${jdk14.executable}</executable> </configuration> </plugin> </plugins> </build> ... </profile> But in my project I just would like to override the configuration of the maven-compiler-plugin in order to use jdk5 instead of jdk4 for compiling test-classes. That's why I did this section in the POM of my project : <profiles> <profile> <id>wls7</id> <activation> <property> <name>jdk</name> <value>4</value> </property> </activation> <build> <directory>target-1.4</directory> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <executions> <execution> <id>my-testCompile</id> <phase>test-compile</phase> <goals> <goal>testCompile</goal> </goals> <configuration> <fork>true</fork> <executable>${jdk15.executable}</executable> <compilerVersion>1.5</compilerVersion> <source>1.5</source> <target>1.5</target> <verbose>true</verbose> </configuration> </execution> </executions> </plugin> </plugins> </build> </profile> ... </profiles> and it's not working ... I even tried to override the configuration in regular plugin sections of my POM (I mean, not for a specific profile but for my whole POM). What could be the problem ? To clarify some of my requirements : I don't want to get rid of the parent POM and the profile (wls7) defined inside it (since I need many and many properties, configurations, ...) and that is not the process in my company. A solution based on duplicating the parent POM and/or the profile defined inside it is not a good one. Since if the responsible of the parent POM change something, I would have to report it in mine. It's just an inheritance matter (extend or override a profile, a configuration from an upper-level POM) so I think it should be possible with maven2.

Read the article

Array Conversion in Xstream Parser

- by Avidev9

Hi am trying to convert the following xml into object using Xstream parser. I tried using the below code to convert the xml but am getting Duplicate field ERRORS ---- Debugging information ---- field : ERRORS class : com.avidev9.Fees.GCSFeesResponse$DebitsWSDS required-type : com.avidev9.Fees.GCSFeesResponse$DebitsWSDS converter-type : com.thoughtworks.xstream.converters.reflection.ReflectionConverter path : /DebitsWSDS/ERRORS[2] line number : 1 version : null The Code I used xstream.alias("DebitsWSDS", GCSFeesResponse.DebitsWSDS.class); xstream.alias("ERRORS", GCSFeesResponse.ERRORS.class); xstream.alias("ERROR_ID", String.class); xstream.alias("TABLE_NAME", String.class); xstream.alias("TABLE_ID", String.class); xstream.alias("ROW_ID", String.class); xstream.alias("ERROR_TEXT", String.class); xstream.alias("ERROR_CODE", String.class); xstream.alias("COLUMN_ID", String.class); xstream.alias("ERROR_TYPE", String.class); GCSFeesResponse.DebitsWSDS gcsFeesResponse =(GCSFeesResponse.DebitsWSDS)xstream.fromXML(result.get_any()[0].getAsString()); XML <DebitsWSDS xmlns=""> <DEBITS> <DEBIT_ID>-1</DEBIT_ID> <ACCOUNT_ID>12321312313</ACCOUNT_ID> <EFFECTIVE_DATE>2012-12-12T00:00:00-06:00</EFFECTIVE_DATE> <DAY_OF_MONTH>12</DAY_OF_MONTH> <DEBIT_TYPE>S</DEBIT_TYPE> <OCCURS_NUM>1</OCCURS_NUM> <DEBIT_AMOUNT>750</DEBIT_AMOUNT> <MEMO>S</MEMO> <ACTIVE_FLAG>Y</ACTIVE_FLAG> <MODIFIED_BY/> <DEBIT_AUTHORIZED/> <DEBIT_AUTHORIZED_BY/> <REMAINING_OCCURRENCES>0</REMAINING_OCCURRENCES> </DEBITS> <ERRORS> <ERROR_ID>1</ERROR_ID> <TABLE_NAME>Debits</TABLE_NAME> <TABLE_ID>-1</TABLE_ID> <ROW_ID>0</ROW_ID> <COLUMN_ID>EXCEPTION</COLUMN_ID> <ERROR_TYPE>E</ERROR_TYPE> <ERROR_CODE>4</ERROR_CODE> <ERROR_TEXT>This debit type is not allowed for this company and policy group</ERROR_TEXT> </ERRORS> <ERRORS> <ERROR_ID>2</ERROR_ID> <TABLE_NAME>Clients</TABLE_NAME> <TABLE_ID/> <ROW_ID>0</ROW_ID> <COLUMN_ID>CLOSE_SCHED_DATE</COLUMN_ID> <ERROR_TYPE>E</ERROR_TYPE> <ERROR_CODE>4</ERROR_CODE> <ERROR_TEXT>Client has been closed. Cannot Authorize Draft.</ERROR_TEXT> </ERRORS> <ERRORS> <ERROR_ID>3</ERROR_ID> <TABLE_NAME>Debits</TABLE_NAME> <TABLE_ID>-1</TABLE_ID> <ROW_ID>0</ROW_ID> <COLUMN_ID>EXCEPTION</COLUMN_ID> <ERROR_TYPE>E</ERROR_TYPE> <ERROR_CODE>4</ERROR_CODE> <ERROR_TEXT>Cannot Schedule a Debit or Draft. Client has been closed.</ERROR_TEXT> </ERRORS> <ERRORS> <ERROR_ID>1</ERROR_ID> <TABLE_NAME>Debits</TABLE_NAME> <TABLE_ID>-1</TABLE_ID> <ROW_ID>0</ROW_ID> <COLUMN_ID>ACTIVE_FLAG</COLUMN_ID> <ERROR_TYPE>W</ERROR_TYPE> <ERROR_CODE>4</ERROR_CODE> <ERROR_TEXT>Creating debit on inactive Client account.</ERROR_TEXT> </ERRORS> </DebitsWSDS> My class structure. package com.avidev9.Fees; import java.util.List; public class GCSFeesResponse { public DebitsWSDS DebitsWSDS; public class DebitsWSDS { public List<ERRORS> ERRORS; public String xmlns; public DEBITS DEBITS; } public class ERRORS { public String TABLE_NAME; public Integer TABLE_ID; public Integer ERROR_ID; public Integer ROW_ID; public String ERROR_TEXT; public Integer ERROR_CODE; public String COLUMN_ID; public String ERROR_TYPE; } public class DEBITS { public String EFFECTIVE_DATE; public String ACTIVE_FLAG; public Long ACCOUNT_ID; public String DEBIT_AUTHORIZED_BY; public Integer DAY_OF_MONTH; public Integer DEBIT_ID; public String MEMO; public Integer REMAINING_OCCURRENCES; public String DEBIT_TYPE; public Integer OCCURS_NUM; public Integer DEBIT_AMOUNT; public String DEBIT_AUTHORIZED; public String MODIFIED_BY; } }

Read the article

Why is Java EE 6 better than Spring ?

- by arungupta

Java EE 6 was released over 2 years ago and now there are 14 compliant application servers. In all my talks around the world, a question that is frequently asked is Why should I use Java EE 6 instead of Spring ? There are already several blogs covering that topic: Java EE wins over Spring by Bill Burke Why will I use Java EE instead of Spring in new Enterprise Java projects in 2012 ? by Kai Waehner (more discussion on TSS) Spring to Java EE migration (Part 1 and 2, 3 and 4 coming as well) by David Heffelfinger Spring to Java EE - A Migration Experience by Lincoln Baxter Migrating Spring to Java EE 6 by Bert Ertman and Paul Bakker at NLJUG Moving from Spring to Java EE 6 - The Age of Frameworks is Over at TSS Java EE vs Spring Shootout by Rohit Kelapure and Reza Rehman at JavaOne 2011 Java EE 6 and the Ewoks by Murat Yener Definite excuse to avoid Spring forever - Bert Ertman and Arun Gupta I will try to share my perspective in this blog. First of all, I'd like to start with a note: Thank you Spring framework for filling the interim gap and providing functionality that is now included in the mainstream Java EE 6 application servers. The Java EE platform has evolved over the years learning from frameworks like Spring and provides all the functionality to build an enterprise application. Thank you very much Spring framework! While Spring was revolutionary in its time and is still very popular and quite main stream in the same way Struts was circa 2003, it really is last generation's framework - some people are even calling it legacy. However my theory is "code is king". So my approach is to build/take a simple Hello World CRUD application in Java EE 6 and Spring and compare the deployable artifacts. I started looking at the official tutorial Developing a Spring Framework MVC Application Step-by-Step but it is using the older version 2.5. I wasn't able to find any updated version in the current 3.1 release. Next, I downloaded Spring Tool Suite and thought that would provide some template samples to get started. A least a quick search did not show any handy tutorials - either video or text-based. So I searched and found a link to their SVN repository at src.springframework.org/svn/spring-samples/. I tried the "mvc-basic" sample and the generated WAR file was 4.43 MB. While it was named a "basic" sample it seemed to come with 19 different libraries bundled but it was what I could find: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/joda-time-jsptags-1.0.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar And it is not even using any database! The app deployed fine on GlassFish 3.1.2 but the "@Controller Example" link did not work as it was missing the context root. With a bit of tweaking I could deploy the application and assume that the account got created because no error was displayed in the browser or server log. Next I generated the WAR for "mvc-ajax" and the 5.1 MB WAR had 20 JARs (1 removed, 2 added): ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.6.4.jar./WEB-INF/lib/jackson-mapper-asl-1.6.4.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar 2 more JARs for just doing Ajax. Anyway, deploying this application gave the following error: Caused by: java.lang.NoSuchMethodError: org.codehaus.jackson.map.SerializationConfig.<init>(Lorg/codehaus/jackson/map/ClassIntrospector;Lorg/codehaus/jackson/map/AnnotationIntrospector;Lorg/codehaus/jackson/map/introspect/VisibilityChecker;Lorg/codehaus/jackson/map/jsontype/SubtypeResolver;)V at org.springframework.samples.mvc.ajax.json.ConversionServiceAwareObjectMapper.<init>(ConversionServiceAwareObjectMapper.java:20) at org.springframework.samples.mvc.ajax.json.JacksonConversionServiceConfigurer.postProcessAfterInitialization(JacksonConversionServiceConfigurer.java:40) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsAfterInitialization(AbstractAutowireCapableBeanFactory.java:407) Seems like some incorrect repos in the "pom.xml". Next one is "mvc-showcase" and the 6.49 MB WAR now has 28 JARs as shown below: ./WEB-INF/lib/aopalliance-1.0.jar./WEB-INF/lib/aspectjrt-1.6.10.jar./WEB-INF/lib/commons-fileupload-1.2.2.jar./WEB-INF/lib/commons-io-2.0.1.jar./WEB-INF/lib/el-api-2.2.jar./WEB-INF/lib/hibernate-validator-4.1.0.Final.jar./WEB-INF/lib/jackson-core-asl-1.8.1.jar./WEB-INF/lib/jackson-mapper-asl-1.8.1.jar./WEB-INF/lib/javax.inject-1.jar./WEB-INF/lib/jcl-over-slf4j-1.6.1.jar./WEB-INF/lib/jdom-1.0.jar./WEB-INF/lib/joda-time-1.6.2.jar./WEB-INF/lib/jstl-api-1.2.jar./WEB-INF/lib/jstl-impl-1.2.jar./WEB-INF/lib/log4j-1.2.16.jar./WEB-INF/lib/rome-1.0.0.jar./WEB-INF/lib/slf4j-api-1.6.1.jar./WEB-INF/lib/slf4j-log4j12-1.6.1.jar./WEB-INF/lib/spring-aop-3.1.0.RELEASE.jar./WEB-INF/lib/spring-asm-3.1.0.RELEASE.jar./WEB-INF/lib/spring-beans-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-3.1.0.RELEASE.jar./WEB-INF/lib/spring-context-support-3.1.0.RELEASE.jar./WEB-INF/lib/spring-core-3.1.0.RELEASE.jar./WEB-INF/lib/spring-expression-3.1.0.RELEASE.jar./WEB-INF/lib/spring-web-3.1.0.RELEASE.jar./WEB-INF/lib/spring-webmvc-3.1.0.RELEASE.jar./WEB-INF/lib/validation-api-1.0.0.GA.jar The app at least deployed and showed results this time. But still no database! Next I tried building "jpetstore" and got the error: [ERROR] Failed to execute goal on project org.springframework.samples.jpetstore:Could not resolve dependencies for project org.springframework.samples:org.springframework.samples.jpetstore:war:1.0.0-SNAPSHOT: Failed to collect dependencies for [commons-fileupload:commons-fileupload:jar:1.2.1 (compile), org.apache.struts:com.springsource.org.apache.struts:jar:1.2.9 (compile), javax.xml.rpc:com.springsource.javax.xml.rpc:jar:1.1.0 (compile), org.apache.commons:com.springsource.org.apache.commons.dbcp:jar:1.2.2.osgi (compile), commons-io:commons-io:jar:1.3.2 (compile), hsqldb:hsqldb:jar:1.8.0.7 (compile), org.apache.tiles:tiles-core:jar:2.2.0 (compile), org.apache.tiles:tiles-jsp:jar:2.2.0 (compile), org.tuckey:urlrewritefilter:jar:3.1.0 (compile), org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-orm:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework:spring-context-support:jar:3.0.0.BUILD-SNAPSHOT (compile), org.springframework.webflow:spring-js:jar:2.0.7.RELEASE (compile), org.apache.ibatis:com.springsource.com.ibatis:jar:2.3.4.726 (runtime), com.caucho:com.springsource.com.caucho:jar:3.2.1 (compile), org.apache.axis:com.springsource.org.apache.axis:jar:1.4.0 (compile), javax.wsdl:com.springsource.javax.wsdl:jar:1.6.1 (compile), javax.servlet:jstl:jar:1.2 (runtime), org.aspectj:aspectjweaver:jar:1.6.5 (compile), javax.servlet:servlet-api:jar:2.5 (provided), javax.servlet.jsp:jsp-api:jar:2.1 (provided), junit:junit:jar:4.6 (test)]: Failed to read artifact descriptor for org.springframework:spring-webmvc:jar:3.0.0.BUILD-SNAPSHOT: Could not transfer artifact org.springframework:spring-webmvc:pom:3.0.0.BUILD-SNAPSHOT from/to JBoss repository (http://repository.jboss.com/maven2): Access denied to: http://repository.jboss.com/maven2/org/springframework/spring-webmvc/3.0.0.BUILD-SNAPSHOT/spring-webmvc-3.0.0.BUILD-SNAPSHOT.pom It appears the sample is broken - maybe I was pulling from the wrong repository - would be great if someone were to point me at a good target to use here. With a 50% hit on samples in this repository, I started searching through numerous blogs, most of which have either outdated information (using XML-heavy Spring 2.5), some piece of configuration (which is a typical "feature" of Spring) is missing, or too much complexity in the sample. I finally found this blog that worked like a charm. This blog creates a trivial Spring MVC 3 application using Hibernate and MySQL. This application performs CRUD operations on a single table in a database using typical Spring technologies. I downloaded the sample code from the blog, deployed it on GlassFish 3.1.2 and could CRUD the "person" entity. The source code for this application can be downloaded here. More details on the application statistics below. And then I built a similar CRUD application in Java EE 6 using NetBeans wizards in a couple of minutes. The source code for the application can be downloaded here and the WAR here. The Spring Source Tool Suite may also offer similar wizard-driven capabilities but this blog focus primarily on comparing the runtimes. The lack of STS tutorials was slightly disappointing as well. NetBeans however has tons of text-based and video tutorials and tons of material even by the community. One more bit on the download size of tools bundle ... NetBeans 7.1.1 "All" is 211 MB (which includes GlassFish and Tomcat) Spring Tool Suite 2.9.0 is 347 MB (~ 65% bigger) This blog is not about the tooling comparison so back to the Java EE 6 version of the application .... In order to run the Java EE version on GlassFish, copy the MySQL Connector/J to glassfish3/glassfish/domains/domain1/lib/ext directory and create a JDBC connection pool and JDBC resource as: ./bin/asadmin create-jdbc-connection-pool --datasourceclassname \\ com.mysql.jdbc.jdbc2.optional.MysqlDataSource --restype \\ javax.sql.DataSource --property \\ portNumber=3306:user=mysql:password=mysql:databaseName=mydatabase \\ myConnectionPool ./bin/asadmin create-jdbc-resource --connectionpoolid myConnectionPool jdbc/myDataSource I generated WARs for the two projects and the table below highlights some differences between them: Java EE 6 Spring WAR File Size 0.021030 MB 10.87 MB (~516x) Number of files 20 53 (> 2.5x) Bundled libraries 0 36 Total size of libraries 0 12.1 MB XML files 3 5 LoC in XML files 50 (11 + 15 + 24) 129 (27 + 46 + 16 + 11 + 19) (~ 2.5x) Total .properties files 1 Bundle.properties 2 spring.properties, log4j.properties Cold Deploy 5,339 ms 11,724 ms Second Deploy 481 ms 6,261 ms Third Deploy 528 ms 5,484 ms Fourth Deploy 484 ms 5,576 ms Runtime memory ~73 MB ~101 MB Some points worth highlighting from the table ... 516x WAR file, 10x deployment time - With 12.1 MB of libraries (for a very basic application) bundled in your application, the WAR file size and the deployment time will naturally go higher. The WAR file for Spring-based application is 516x bigger and the deployment time is double during the first deployment and ~ 10x during subsequent deployments. The Java EE 6 application is fully portable and will run on any Java EE 6 compliant application server. 36 libraries in the WAR - There are 14 Java EE 6 compliant application servers today. Each of those servers provide all the functionality like transactions, dependency injection, security, persistence, etc typically required of an enterprise or web application. There is no need to bundle 36 libraries worth 12.1 MB for a trivial CRUD application. These 14 compliant application servers provide all the functionality baked in. Now you can also deploy these libraries in the container but then you don't get the "portability" offered by Spring in that case. Does your typical Spring deployment actually do that ? 3x LoC in XML - The number of XML files is about 1.6x and the LoC is ~ 2.5x. So much XML seems circa 2003 when the Java language had no annotations. The XML files can be further reduced, e.g. faces-config.xml can be replaced without providing i18n, but I just want to compare stock applications. Memory usage - Both the applications were deployed on default GlassFish 3.1.2 installation and any additional memory consumed as part of deployment/access was attributed to the application. This is by no means scientific but at least provides an initial ballpark. This area definitely needs more investigation. Another table that compares typical Java EE 6 compliant application servers and the custom-stack created for a Spring application ... Java EE 6 Spring Web Container ? 53 MB (tcServer 2.6.3 Developer Edition) Security ? 12 MB (Spring Security 3.1.0) Persistence ? 6.3 MB (Hibernate 4.1.0, required) Dependency Injection ? 5.3 MB (Framework) Web Services ? 796 KB (Spring WS 2.0.4) Messaging ? 3.4 MB (RabbitMQ Server 2.7.1) 936 KB (Java client 936) OSGi ? 1.3 MB (Spring OSGi 1.2.1) GlassFish and WebLogic (starting at 33 MB) 83.3 MB There are differentiating factors on both the stacks. But most of the functionality like security, persistence, and dependency injection is baked in a Java EE 6 compliant application server but needs to be individually managed and patched for a Spring application. This very quickly leads to a "stack explosion". The Java EE 6 servers are tested extensively on a variety of platforms in different combinations whereas a Spring application developer is responsible for testing with different JDKs, Operating Systems, Versions, Patches, etc. Oracle has both the leading OSS lightweight server with GlassFish and the leading enterprise Java server with WebLogic Server, both Java EE 6 and both with lightweight deployment options. The Web Container offered as part of a Java EE 6 application server not only deploys your enterprise Java applications but also provide operational management, diagnostics, and mission-critical capabilities required by your applications. The Java EE 6 platform also introduced the Web Profile which is a subset of the specifications from the entire platform. It is targeted at developers of modern web applications offering a reasonably complete stack, composed of standard APIs, and is capable out-of-the-box of addressing the needs of a large class of Web applications. As your applications grow, the stack can grow to the full Java EE 6 platform. The GlassFish Server Web Profile starting at 33MB (smaller than just the non-standard tcServer) provides most of the functionality typically required by a web application. WebLogic provides battle-tested functionality for a high throughput, low latency, and enterprise grade web application. No individual managing or patching, all tested and commercially supported for you! Note that VMWare does have a server, tcServer, but it is non-standard and not even certified to the level of the standard Web Profile most customers expect these days. Customers who choose this risk proprietary lock-in since VMWare does not seem to want to formally certify with either Java EE 6 Enterprise Platform or with Java EE 6 Web Profile but of course it would be great if they were to join the community and help their customers reduce the risk of deploying on VMWare software. Some more points to help you decide choose between Java EE 6 and Spring ... Freedom to choose container - There are 14 Java EE 6 compliant application servers today, with a variety of open source and commercial offerings. A Java EE 6 application can be deployed on any of those containers. So if you deployed your application on GlassFish today and would like to scale up with your demands then you can deploy the same application to WebLogic. And because of the portability of a Java EE 6 application, you can even take it a different vendor altogether. Spring requires a runtime which could be any of these app servers as well. But why use Spring when all the required functionality is already baked into the application server itself ? Spring also has a different definition of portability where they claim to bundle all the libraries in the WAR file and move to any application server. But we saw earlier how bloated that archive could be. The equivalent features in Spring runtime offerings (mainly tcServer) are not all open source, not as mature, and often require manual assembly. Vendor choice - The Java EE 6 platform is created using the Java Community Process where all the big players like Oracle, IBM, RedHat, and Apache are conritbuting to make the platform successful. Each application server provides the basic Java EE 6 platform compliance and has its own competitive offerings. This allows you to choose an application server for deploying your Java EE 6 applications. If you are not happy with the support or feature of one vendor then you can move your application to a different vendor because of the portability promise offered by the platform. Spring is a set of products from a single company, one price book, one support organization, one sustaining organization, one sales organization, etc. If any of those cause a customer headache, where do you go ? Java EE, backed by multiple vendors, is a safer bet for those that are risk averse. Production support - With Spring, typically you need to get support from two vendors - VMWare and the container provider. With Java EE 6, all of this is typically provided by one vendor. For example, Oracle offers commercial support from systems, operating systems, JDK, application server, and applications on top of them. VMWare certainly offers complete production support but do you really want to put all your eggs in one basket ? Do you really use tcServer ? ;-) Maintainability - With Spring, you are likely building your own distribution with multiple JAR files, integrating, patching, versioning, etc of all those components. Spring's claim is that multiple JAR files allow you to go à la carte and pick the latest versions of different components. But who is responsible for testing whether all these versions work together ? Yep, you got it, its YOU! If something does not work, who patches and maintains the JARs ? Of course, you! Commercial support for such a configuration ? On your own! The Java EE application servers manage all of this for you and provide a well-tested and commercially supported bundle. While it is always good to realize that there is something new and improved that updates and replaces older frameworks like Spring, the good news is not only does a Java EE 6 container offer what is described here, most also will let you deploy and run your Spring applications on them while you go through an upgrade to a more modern architecture. End result, you get the best of both worlds - keeping your legacy investment but moving to a more agile, lightweight world of Java EE 6. A message to the Spring lovers ... The complexity in J2EE 1.2, 1.3, and 1.4 led to the genesis of Spring but that was in 2004. This is 2012 and the name has changed to "Java EE 6" :-) There are tons of improvements in the Java EE platform to make it easy-to-use and powerful. Some examples: Adding @Stateless on a POJO makes it an EJB EJBs can be packaged in a WAR with no special packaging or deployment descriptors "web.xml" and "faces-config.xml" are optional in most of the common cases Typesafe dependency injection is now part of the Java EE platform Add @Path on a POJO allows you to publish it as a RESTful resource EJBs can be used as backing beans for Facelets-driven JSF pages providing full MVC Java EE 6 WARs are known to be kilobytes in size and deployed in milliseconds Tons of other simplifications in the platform and application servers So if you moved away from J2EE to Spring many years ago and have not looked at Java EE 6 (which has been out since Dec 2009) then you should definitely try it out. Just be at least aware of what other alternatives are available instead of restricting yourself to one stack. Here are some workshops and screencasts worth trying: screencast #37 shows how to build an end-to-end application using NetBeans screencast #36 builds the same application using Eclipse javaee-lab-feb2012.pdf is a 3-4 hours self-paced hands-on workshop that guides you to build a comprehensive Java EE 6 application using NetBeans Each city generally has a "spring cleanup" program every year. It allows you to clean up the mess from your house. For your software projects, you don't need to wait for an annual event, just get started and reduce the technical debt now! Move away from your legacy Spring-based applications to a lighter and more modern approach of building enterprise Java applications using Java EE 6. Watch this beautiful presentation that explains how to migrate from Spring -> Java EE 6: List of files in the Java EE 6 project: ./index.xhtml./META-INF./person./person/Create.xhtml./person/Edit.xhtml./person/List.xhtml./person/View.xhtml./resources./resources/css./resources/css/jsfcrud.css./template.xhtml./WEB-INF./WEB-INF/classes./WEB-INF/classes/Bundle.properties./WEB-INF/classes/META-INF./WEB-INF/classes/META-INF/persistence.xml./WEB-INF/classes/org./WEB-INF/classes/org/javaee./WEB-INF/classes/org/javaee/javaeemysql./WEB-INF/classes/org/javaee/javaeemysql/AbstractFacade.class./WEB-INF/classes/org/javaee/javaeemysql/Person.class./WEB-INF/classes/org/javaee/javaeemysql/Person_.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$1.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController$PersonControllerConverter.class./WEB-INF/classes/org/javaee/javaeemysql/PersonController.class./WEB-INF/classes/org/javaee/javaeemysql/PersonFacade.class./WEB-INF/classes/org/javaee/javaeemysql/util./WEB-INF/classes/org/javaee/javaeemysql/util/JsfUtil.class./WEB-INF/classes/org/javaee/javaeemysql/util/PaginationHelper.class./WEB-INF/faces-config.xml./WEB-INF/web.xml List of files in the Spring 3.x project: ./META-INF ./META-INF/MANIFEST.MF./WEB-INF./WEB-INF/applicationContext.xml./WEB-INF/classes./WEB-INF/classes/log4j.properties./WEB-INF/classes/org./WEB-INF/classes/org/krams ./WEB-INF/classes/org/krams/tutorial ./WEB-INF/classes/org/krams/tutorial/controller ./WEB-INF/classes/org/krams/tutorial/controller/MainController.class ./WEB-INF/classes/org/krams/tutorial/domain ./WEB-INF/classes/org/krams/tutorial/domain/Person.class ./WEB-INF/classes/org/krams/tutorial/service ./WEB-INF/classes/org/krams/tutorial/service/PersonService.class ./WEB-INF/hibernate-context.xml ./WEB-INF/hibernate.cfg.xml ./WEB-INF/jsp ./WEB-INF/jsp/addedpage.jsp ./WEB-INF/jsp/addpage.jsp ./WEB-INF/jsp/deletedpage.jsp ./WEB-INF/jsp/editedpage.jsp ./WEB-INF/jsp/editpage.jsp ./WEB-INF/jsp/personspage.jsp ./WEB-INF/lib ./WEB-INF/lib/antlr-2.7.6.jar ./WEB-INF/lib/aopalliance-1.0.jar ./WEB-INF/lib/c3p0-0.9.1.2.jar ./WEB-INF/lib/cglib-nodep-2.2.jar ./WEB-INF/lib/commons-beanutils-1.8.3.jar ./WEB-INF/lib/commons-collections-3.2.1.jar ./WEB-INF/lib/commons-digester-2.1.jar ./WEB-INF/lib/commons-logging-1.1.1.jar ./WEB-INF/lib/dom4j-1.6.1.jar ./WEB-INF/lib/ejb3-persistence-1.0.2.GA.jar ./WEB-INF/lib/hibernate-annotations-3.4.0.GA.jar ./WEB-INF/lib/hibernate-commons-annotations-3.1.0.GA.jar ./WEB-INF/lib/hibernate-core-3.3.2.GA.jar ./WEB-INF/lib/javassist-3.7.ga.jar ./WEB-INF/lib/jstl-1.1.2.jar ./WEB-INF/lib/jta-1.1.jar ./WEB-INF/lib/junit-4.8.1.jar ./WEB-INF/lib/log4j-1.2.14.jar ./WEB-INF/lib/mysql-connector-java-5.1.14.jar ./WEB-INF/lib/persistence-api-1.0.jar ./WEB-INF/lib/slf4j-api-1.6.1.jar ./WEB-INF/lib/slf4j-log4j12-1.6.1.jar ./WEB-INF/lib/spring-aop-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-asm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-beans-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-context-support-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-core-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-expression-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-jdbc-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-orm-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-tx-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-web-3.0.5.RELEASE.jar ./WEB-INF/lib/spring-webmvc-3.0.5.RELEASE.jar ./WEB-INF/lib/standard-1.1.2.jar ./WEB-INF/lib/xml-apis-1.0.b2.jar ./WEB-INF/spring-servlet.xml ./WEB-INF/spring.properties ./WEB-INF/web.xml So, are you excited about Java EE 6 ? Want to get started now ? Here are some resources: Java EE 6 SDK (including runtime, samples, tutorials etc) GlassFish Server Open Source Edition 3.1.2 (Community) Oracle GlassFish Server 3.1.2 (Commercial) Java EE 6 using WebLogic 12c and NetBeans (Video) Java EE 6 with NetBeans and GlassFish (Video) Java EE with Eclipse and GlassFish (Video)

Read the article

Integrating HTML into Silverlight Applications

- by dwahlin

Looking for a way to display HTML content within a Silverlight application? If you haven’t tried doing that before it can be challenging at first until you know a few tricks of the trade. Being able to display HTML is especially handy when you’re required to display RSS feeds (with embedded HTML), SQL Server Reporting Services reports, PDF files (not actually HTML – but the techniques discussed will work), or other HTML content. In this post I'll discuss three options for displaying HTML content in Silverlight applications and describe how my company is using these techniques in client applications. Displaying HTML Overlays If you need to display HTML over a Silverlight application (such as an RSS feed containing HTML data in it) you’ll need to set the Silverlight control’s windowless parameter to true. This can be done using the object tag as shown next: <object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%"> <param name="source" value="ClientBin/HTMLAndSilverlight.xap"/> <param name="onError" value="onSilverlightError" /> <param name="background" value="white" /> <param name="minRuntimeVersion" value="4.0.50401.0" /> <param name="autoUpgrade" value="true" /> <param name="windowless" value="true" /> <a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=4.0.50401.0" style="text-decoration:none"> <img src="http://go.microsoft.com/fwlink/?LinkId=161376" alt="Get Microsoft Silverlight" style="border-style:none"/> </a> </object> By setting the control to “windowless” you can overlay HTML objects by using absolute positioning and other CSS techniques. Keep in mind that on Windows machines the windowless setting can result in a performance hit when complex animations or HD video are running since the plug-in content is displayed directly by the browser window. It goes without saying that you should only set windowless to true when you really need the functionality it offers. For example, if I want to display my blog’s RSS content on top of a Silverlight application I could set windowless to true and create a user control that grabbed the content and output it using a DataList control: <style type="text/css"> a {text-decoration:none;font-weight:bold;font-size:14pt;} </style> <div style="margin-top:10px; margin-left:10px;margin-right:5px;"> <asp:DataList ID="RSSDataList" runat="server" DataSourceID="RSSDataSource"> <ItemTemplate> <a href='<%# XPath("link") %>'><%# XPath("title") %></a> <br /> <%# XPath("description") %> <br /> </ItemTemplate> </asp:DataList> <asp:XmlDataSource ID="RSSDataSource" DataFile="http://weblogs.asp.net/dwahlin/rss.aspx" XPath="rss/channel/item" CacheDuration="60" runat="server" /> </div> The user control can then be placed in the page hosting the Silverlight control as shown below. This example adds a Close button, additional content to display in the overlay window and the HTML generated from the user control. <div id="RSSDiv"> <div style="background-color:#484848;border:1px solid black;height:35px;width:100%;"> <img alt="Close Button" align="right" src="Images/Close.png" onclick="HideOverlay();" style="cursor:pointer;" /> </div> <div style="overflow:auto;width:800px;height:565px;"> <div style="float:left;width:100px;height:103px;margin-left:10px;margin-top:5px;"> <img src="http://weblogs.asp.net/blogs/dwahlin/dan2008.jpg" style="border:1px solid Gray" /> </div> <div style="float:left;width:300px;height:103px;margin-top:5px;"> <a href="http://weblogs.asp.net/dwahlin" style="margin-left:10px;font-size:20pt;">Dan Wahlin's Blog</a> </div> <br /><br /><br /> <div style="clear:both;margin-top:20px;"> <uc:BlogRoller ID="BlogRoller" runat="server" /> </div> </div> </div> Of course, we wouldn’t want the RSS HTML content to be shown until requested. Once it’s requested the absolute position of where it should show above the Silverlight control can be set using standard CSS styles. The following ID selector named #RSSDiv handles hiding the overlay div shown above and determines where it will be display on the screen. #RSSDiv { background-color:White; position:absolute; top:100px; left:300px; width:800px; height:600px; border:1px solid black; display:none; } Now that the HTML content to display above the Silverlight control is set, how can we show it as a user clicks a HyperlinkButton or other control in the application? Fortunately, Silverlight provides an excellent HTML bridge that allows direct access to content hosted within a page. The following code shows two JavaScript functions that can be called from Siverlight to handle showing or hiding HTML overlay content. The two functions rely on jQuery (http://www.jQuery.com) to make it easy to select HTML objects and manipulate their properties: function ShowOverlay() { rssDiv.css('display', 'block'); } function HideOverlay() { rssDiv.css('display', 'none'); } Calling the ShowOverlay function is as simple as adding the following code into the Silverlight application within a button’s Click event handler: private void OverlayHyperlinkButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.Invoke("ShowOverlay"); } The result of setting the Silverlight control’s windowless parameter to true and showing the HTML overlay content is shown in the following screenshot: Thinking Outside the Box to Show HTML Content Setting the windowless parameter to true may not be a viable option for some Silverlight applications or you may simply want to go about showing HTML content a different way. The next technique I’ll show takes advantage of simple HTML, CSS and JavaScript code to handle showing HTML content while a Silverlight application is running in the browser. Keep in mind that with Silverlight’s HTML bridge feature you can always pop-up HTML content in a new browser window using code similar to the following: System.Windows.Browser.HtmlPage.Window.Navigate( new Uri("http://silverlight.net"), "_blank"); For this example I’ll demonstrate how to hide the Silverlight application while maximizing a container div containing the HTML content to show. This allows HTML content to take up the full screen area of the browser without having to set windowless to true and when done right can make the user feel like they never left the Silverlight application. The following HTML shows several div elements that are used to display HTML within the same browser window as the Silverlight application: <div id="JobPlanDiv"> <div style="vertical-align:middle"> <img alt="Close Button" align="right" src="Images/Close.png" onclick="HideJobPlanIFrame();" style="cursor:pointer;" /> </div> <div id="JobPlan_IFrame_Container" style="height:95%;width:100%;margin-top:37px;"></div> </div> The JobPlanDiv element acts as a container for two other divs that handle showing a close button and hosting an iframe that will be added dynamically at runtime. JobPlanDiv isn’t visible when the Silverlight application loads due to the following ID selector added into the page: #JobPlanDiv { position:absolute; background-color:#484848; overflow:hidden; left:0; top:0; height:100%; width:100%; display:none; } When the HTML content needs to be shown or hidden the JavaScript functions shown next can be used: var jobPlanIFrameID = 'JobPlan_IFrame'; var slHost = null; var jobPlanContainer = null; var jobPlanIFrameContainer = null; var rssDiv = null; $(document).ready(function () { slHost = $('#silverlightControlHost'); jobPlanContainer = $('#JobPlanDiv'); jobPlanIFrameContainer = $('#JobPlan_IFrame_Container'); rssDiv = $('#RSSDiv'); }); function ShowJobPlanIFrame(url) { jobPlanContainer.css('display', 'block'); $('<iframe id="' + jobPlanIFrameID + '" src="' + url + '" style="height:100%;width:100%;" />') .appendTo(jobPlanIFrameContainer); slHost.css('width', '0%'); } function HideJobPlanIFrame() { jobPlanContainer.css('display', 'none'); $('#' + jobPlanIFrameID).remove(); slHost.css('width', '100%'); } ShowJobPlanIFrame() handles showing the JobPlanDiv div and adding an iframe into it dynamically. Once JobPlanDiv is shown, the Silverlight control host has its width set to a value of 0% to allow the control to stay alive while making it invisible to the user. I found that this technique works better across multiple browsers as opposed to manipulating the Silverlight control host div’s display or visibility properties. Now that you’ve seen the code to handle showing and hiding the HTML content area, let’s switch focus to the Silverlight application. As a user clicks on a link such as “View Report” the ShowJobPlanIFrame() JavaScript function needs to be called. The following code handles that task: private void ReportHyperlinkButton_Click(object sender, RoutedEventArgs e) { ShowBrowser(_BaseUrl + "/Report.aspx"); } public void ShowBrowser(string url) { HtmlPage.Window.Invoke("ShowJobPlanIFrame", url); } Any URL can be passed into the ShowBrowser() method which handles invoking the JavaScript function. This includes standard web pages or even PDF files. We’ve used this technique frequently with our SmartPrint control (http://www.smartwebcontrols.com) which converts Silverlight screens into PDF documents and displays them. Here’s an example of the content generated: Silverlight 4’s WebBrowser Control Both techniques shown to this point work well when Silverlight is running in-browser but not so well when it’s running out-of-browser since there’s no host page that you can access using the HTML bridge. Fortunately, Silverlight 4 provides a WebBrowser control that can be used to perform the same functionality quite easily. We’re currently using it in client applications to display PDF documents, SSRS reports and standard HTML content. Using the WebBrowser control simplifies the application quite a bit since no JavaScript is required if the application only runs out-of-browser. Here’s a simple example of defining the WebBrowser control in XAML. I typically define it in MainPage.xaml when a Silverlight Navigation template is used to create the project so that I can re-use the functionality across multiple screens. <Grid x:Name="WebBrowserGrid" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Visibility="Collapsed"> <StackPanel HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <Border Background="#484848" HorizontalAlignment="Stretch" Height="40"> <Image x:Name="WebBrowserImage" Width="100" Height="33" Cursor="Hand" HorizontalAlignment="Right" Source="/HTMLAndSilverlight;component/Assets/Images/Close.png" MouseLeftButtonDown="WebBrowserImage_MouseLeftButtonDown" /> </Border> <WebBrowser x:Name="JobPlanReportWebBrowser" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" /> </StackPanel> </Grid> Looking through the XAML you can see that a close image is defined along with the WebBrowser control. Because the URL that the WebBrowser should navigate to isn’t known at design time no value is assigned to the control’s Source property. If the XAML shown above is left “as is” you’ll find that any HTML content assigned to the WebBrowser doesn’t display properly. This is due to no height or width being set on the control. To handle this issue the following code is added into the XAML’s code-behind file to dynamically determine the height and width of the page and assign it to the WebBrowser. This is done by handling the SizeChanged event. void MainPage_SizeChanged(object sender, SizeChangedEventArgs e) { WebBrowserGrid.Height = JobPlanReportWebBrowser.Height = ActualHeight; WebBrowserGrid.Width = JobPlanReportWebBrowser.Width = ActualWidth; } When the user wants to view HTML content they click a button which executes the code shown in next: public void ShowBrowser(string url) { if (Application.Current.IsRunningOutOfBrowser) { JobPlanReportWebBrowser.NavigateToString("<html><body><iframe src='" + url + "' style='width:100%;height:97%;' /></body></html>"); WebBrowserGrid.Visibility = Visibility.Visible; } else { HtmlPage.Window.Invoke("ShowJobPlanIFrame", url); } } private void WebBrowserImage_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { WebBrowserGrid.Visibility = Visibility.Collapsed; } Looking through the code you’ll see that it checks to see if the Silverlight application is running out-of-browser and then either displays the WebBrowser control or runs the JavaScript function discussed earlier. Although the WebBrowser control’s Source property could be assigned the URI of the page to navigate to, by assigning HTML content using the NavigateToString() method and adding an iframe, content can be shown from any site including cross-domain sites. This is especially handy when you need to grab a page from a reporting site that’s in a different domain than the Silverlight application. Here’s an example of viewing PDF file inside of an out-of-browser application. The first image shows the application running out-of-browser before the user clicks a PDF HyperlinkButton. The second image shows the PDF being displayed. While there are certainly other techniques that can be used, the ones shown here have worked well for us in different applications and provide the ability to display HTML content in-browser or out-of-browser. Feel free to add a comment if you have another tip or trick you like to use when working with HTML content in Silverlight applications. Download Code Sample For more information about onsite, online and video training, mentoring and consulting solutions for .NET, SharePoint or Silverlight please visit http://www.thewahlingroup.com.

Read the article

Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there?

- by jasonspiro

A client of my IT-consulting service owns a web-development shop. He's been having problems with a Slackware 12.0 server running MySQL 5.0.67. The machine was set up by the client's sysadmin, who left on bad terms. My client no longer employs a sysadmin. As far as I can tell, the only copy of MySQL that's installed is the one described in /var/log/packages/mysql-5.0.67-i486-1: PACKAGE NAME: mysql-5.0.67-i486-1 COMPRESSED PACKAGE SIZE: 16828 K UNCOMPRESSED PACKAGE SIZE: 33840 K PACKAGE LOCATION: /var/slapt-get/archives/./slackware/ap/mysql-5.0.67-i486-1.tgz PACKAGE DESCRIPTION: mysql: mysql (SQL-based relational database server) mysql: mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL mysql: (Structured Query Language) database server. It comes with a nice API mysql: which makes it easy to integrate into other applications. mysql: mysql: The home page for MySQL is http://www.mysql.com/ mysql: mysql: mysql: mysql: FILE LIST: ./ var/ var/lib/ var/lib/mysql/ var/run/ var/run/mysql/ install/ install/doinst.sh install/slack-desc usr/ usr/include/ usr/include/mysql/ usr/include/mysql/my_alloc.h usr/include/mysql/sql_common.h usr/include/mysql/my_dbug.h usr/include/mysql/errmsg.h usr/include/mysql/my_pthread.h usr/include/mysql/my_list.h usr/include/mysql/mysql.h usr/include/mysql/sslopt-vars.h usr/include/mysql/my_config.h usr/include/mysql/mysql_com.h usr/include/mysql/m_string.h usr/include/mysql/sslopt-case.h usr/include/mysql/my_xml.h usr/include/mysql/sql_state.h usr/include/mysql/my_global.h usr/include/mysql/my_sys.h usr/include/mysql/mysqld_ername.h usr/include/mysql/mysqld_error.h usr/include/mysql/sslopt-longopts.h usr/include/mysql/keycache.h usr/include/mysql/my_net.h usr/include/mysql/mysql_version.h usr/include/mysql/my_no_pthread.h usr/include/mysql/decimal.h usr/include/mysql/readline.h usr/include/mysql/my_attribute.h usr/include/mysql/typelib.h usr/include/mysql/my_dir.h usr/include/mysql/raid.h usr/include/mysql/m_ctype.h usr/include/mysql/mysql_embed.h usr/include/mysql/mysql_time.h usr/include/mysql/my_getopt.h usr/lib/ usr/lib/mysql/ usr/lib/mysql/libmysqlclient_r.so.15.0.0 usr/lib/mysql/libmysqlclient_r.la usr/lib/mysql/libmyisammrg.a usr/lib/mysql/libmystrings.a usr/lib/mysql/libmyisam.a usr/lib/mysql/libmysqlclient.so.15.0.0 usr/lib/mysql/libmysqlclient_r.a usr/lib/mysql/libmysqlclient.a usr/lib/mysql/libheap.a usr/lib/mysql/libvio.a usr/lib/mysql/libmysqlclient.la usr/lib/mysql/libmysys.a usr/lib/mysql/libdbug.a usr/bin/ usr/bin/comp_err usr/bin/my_print_defaults usr/bin/resolve_stack_dump usr/bin/msql2mysql usr/bin/mysqltestmanager-pwgen usr/bin/myisampack usr/bin/replace usr/bin/mysqld_multi usr/bin/mysqlaccess usr/bin/mysql_install_db usr/bin/innochecksum usr/bin/myisam_ftdump usr/bin/mysqlcheck usr/bin/mysqltest usr/bin/mysql_upgrade_shell usr/bin/mysql_secure_installation usr/bin/mysql_fix_extensions usr/bin/mysqld_safe usr/bin/mysql_explain_log usr/bin/mysqlimport usr/bin/myisamlog usr/bin/mysql_tzinfo_to_sql usr/bin/mysql_upgrade usr/bin/mysqltestmanager usr/bin/mysql_fix_privilege_tables usr/bin/mysql_find_rows usr/bin/mysql_convert_table_format usr/bin/mysqltestmanagerc usr/bin/mysqlhotcopy usr/bin/mysqldump usr/bin/mysqlshow usr/bin/mysqlbug usr/bin/mysql_config usr/bin/mysqldumpslow usr/bin/mysql_waitpid usr/bin/mysqlbinlog usr/bin/mysql_client_test usr/bin/perror usr/bin/mysql usr/bin/myisamchk usr/bin/mysql_setpermission usr/bin/mysqladmin usr/bin/mysql_zap usr/bin/mysql_tableinfo usr/bin/resolveip usr/share/ usr/share/mysql/ usr/share/mysql/errmsg.txt usr/share/mysql/swedish/ usr/share/mysql/swedish/errmsg.sys usr/share/mysql/mysql_system_tables_data.sql usr/share/mysql/mysql.server usr/share/mysql/hungarian/ usr/share/mysql/hungarian/errmsg.sys usr/share/mysql/norwegian/ usr/share/mysql/norwegian/errmsg.sys usr/share/mysql/slovak/ usr/share/mysql/slovak/errmsg.sys usr/share/mysql/spanish/ usr/share/mysql/spanish/errmsg.sys usr/share/mysql/polish/ usr/share/mysql/polish/errmsg.sys usr/share/mysql/ukrainian/ usr/share/mysql/ukrainian/errmsg.sys usr/share/mysql/danish/ usr/share/mysql/danish/errmsg.sys usr/share/mysql/romanian/ usr/share/mysql/romanian/errmsg.sys usr/share/mysql/english/ usr/share/mysql/english/errmsg.sys usr/share/mysql/charsets/ usr/share/mysql/charsets/latin2.xml usr/share/mysql/charsets/greek.xml usr/share/mysql/charsets/koi8r.xml usr/share/mysql/charsets/latin1.xml usr/share/mysql/charsets/cp866.xml usr/share/mysql/charsets/geostd8.xml usr/share/mysql/charsets/cp1250.xml usr/share/mysql/charsets/koi8u.xml usr/share/mysql/charsets/cp852.xml usr/share/mysql/charsets/hebrew.xml usr/share/mysql/charsets/latin7.xml usr/share/mysql/charsets/README usr/share/mysql/charsets/ascii.xml usr/share/mysql/charsets/cp1251.xml usr/share/mysql/charsets/macce.xml usr/share/mysql/charsets/latin5.xml usr/share/mysql/charsets/Index.xml usr/share/mysql/charsets/macroman.xml usr/share/mysql/charsets/cp1256.xml usr/share/mysql/charsets/keybcs2.xml usr/share/mysql/charsets/swe7.xml usr/share/mysql/charsets/armscii8.xml usr/share/mysql/charsets/dec8.xml usr/share/mysql/charsets/cp1257.xml usr/share/mysql/charsets/hp8.xml usr/share/mysql/charsets/cp850.xml usr/share/mysql/korean/ usr/share/mysql/korean/errmsg.sys usr/share/mysql/german/ usr/share/mysql/german/errmsg.sys usr/share/mysql/mi_test_all.res usr/share/mysql/greek/ usr/share/mysql/greek/errmsg.sys usr/share/mysql/french/ usr/share/mysql/french/errmsg.sys usr/share/mysql/mysql_fix_privilege_tables.sql usr/share/mysql/dutch/ usr/share/mysql/dutch/errmsg.sys usr/share/mysql/serbian/ usr/share/mysql/serbian/errmsg.sys usr/share/mysql/mysql_system_tables.sql usr/share/mysql/my-huge.cnf usr/share/mysql/portuguese/ usr/share/mysql/portuguese/errmsg.sys usr/share/mysql/japanese/ usr/share/mysql/japanese/errmsg.sys usr/share/mysql/mysql_test_data_timezone.sql usr/share/mysql/russian/ usr/share/mysql/russian/errmsg.sys usr/share/mysql/czech/ usr/share/mysql/czech/errmsg.sys usr/share/mysql/fill_help_tables.sql usr/share/mysql/estonian/ usr/share/mysql/estonian/errmsg.sys usr/share/mysql/my-medium.cnf usr/share/mysql/norwegian-ny/ usr/share/mysql/norwegian-ny/errmsg.sys usr/share/mysql/my-small.cnf usr/share/mysql/mysql-log-rotate usr/share/mysql/italian/ usr/share/mysql/italian/errmsg.sys usr/share/mysql/my-large.cnf usr/share/mysql/ndb-config-2-node.ini usr/share/mysql/binary-configure usr/share/mysql/mi_test_all usr/share/mysql/mysqld_multi.server usr/share/mysql/my-innodb-heavy-4G.cnf usr/doc/ usr/doc/mysql-5.0.67/ usr/doc/mysql-5.0.67/README usr/doc/mysql-5.0.67/Docs/ usr/doc/mysql-5.0.67/Docs/INSTALL-BINARY usr/doc/mysql-5.0.67/COPYING usr/info/ usr/info/mysql.info.gz usr/libexec/ usr/libexec/mysqld usr/libexec/mysqlmanager usr/man/ usr/man/man8/ usr/man/man8/mysqlmanager.8.gz usr/man/man8/mysqld.8.gz usr/man/man1/ usr/man/man1/mysql_zap.1.gz usr/man/man1/mysql_setpermission.1.gz usr/man/man1/mysql_tzinfo_to_sql.1.gz usr/man/man1/msql2mysql.1.gz usr/man/man1/mysql_tableinfo.1.gz usr/man/man1/mysql_explain_log.1.gz usr/man/man1/mysqlcheck.1.gz usr/man/man1/comp_err.1.gz usr/man/man1/my_print_defaults.1.gz usr/man/man1/mysqlbinlog.1.gz usr/man/man1/myisam_ftdump.1.gz usr/man/man1/mysql_upgrade.1.gz usr/man/man1/mysql.1.gz usr/man/man1/mysql_client_test.1.gz usr/man/man1/resolve_stack_dump.1.gz usr/man/man1/mysql_fix_extensions.1.gz usr/man/man1/mysqlmanagerc.1.gz usr/man/man1/mysql_config.1.gz usr/man/man1/mysqlshow.1.gz usr/man/man1/myisamlog.1.gz usr/man/man1/replace.1.gz usr/man/man1/mysqlmanager-pwgen.1.gz usr/man/man1/mysqltest.1.gz usr/man/man1/innochecksum.1.gz usr/man/man1/mysqladmin.1.gz usr/man/man1/perror.1.gz usr/man/man1/mysql_waitpid.1.gz usr/man/man1/mysql_convert_table_format.1.gz usr/man/man1/mysqlman.1.gz usr/man/man1/mysqlimport.1.gz usr/man/man1/mysqlbug.1.gz usr/man/man1/mysql_find_rows.1.gz usr/man/man1/myisampack.1.gz usr/man/man1/myisamchk.1.gz usr/man/man1/mysql_fix_privilege_tables.1.gz usr/man/man1/mysql-stress-test.pl.1.gz usr/man/man1/resolveip.1.gz usr/man/man1/make_win_bin_dist.1.gz usr/man/man1/mysqlhotcopy.1.gz usr/man/man1/mysqld_multi.1.gz usr/man/man1/safe_mysqld.1.gz usr/man/man1/mysql_secure_installation.1.gz usr/man/man1/mysql_install_db.1.gz usr/man/man1/mysqldump.1.gz usr/man/man1/mysql-test-run.pl.1.gz usr/man/man1/mysqld_safe.1.gz usr/man/man1/mysqlaccess.1.gz usr/man/man1/mysql.server.1.gz usr/man/man1/make_win_src_distribution.1.gz etc/ etc/rc.d/ etc/rc.d/rc.mysqld.new etc/my-huge.cnf etc/my-medium.cnf etc/my-small.cnf etc/my-large.cnf /etc/rc.d/rc.mysqld is an ordinary Slackware-type start/stop script: #!/bin/sh # Start/stop/restart mysqld. # # Copyright 2003 Patrick J. Volkerding, Concord, CA # Copyright 2003 Slackware Linux, Inc., Concord, CA # # This program comes with NO WARRANTY, to the extent permitted by law. # You may redistribute copies of this program under the terms of the # GNU General Public License. # To start MySQL automatically at boot, be sure this script is executable: # chmod 755 /etc/rc.d/rc.mysqld # Before you can run MySQL, you must have a database. To install an initial # database, do this as root: # # su - mysql # mysql_install_db # # Note that step one is becoming the mysql user. It's important to do this # before making any changes to the database, or mysqld won't be able to write # to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). # To allow outside connections to the database comment out the next line. # If you don't need incoming network connections, then leave the line # uncommented to improve system security. #SKIP="--skip-networking" # Start mysqld: mysqld_start() { if [ -x /usr/bin/mysqld_safe ]; then # If there is an old PID file (no mysqld running), clean it up: if [ -r /var/run/mysql/mysql.pid ]; then if ! ps axc | grep mysqld 1> /dev/null 2> /dev/null ; then echo "Cleaning up old /var/run/mysql/mysql.pid." rm -f /var/run/mysql/mysql.pid fi fi /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & fi } # Stop mysqld: mysqld_stop() { # If there is no PID file, ignore this request... if [ -r /var/run/mysql/mysql.pid ]; then killall mysqld # Wait at least one minute for it to exit, as we don't know how big the DB is... for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do if [ ! -r /var/run/mysql/mysql.pid ]; then break; fi sleep 1 done if [ "$second" = "60" ]; then echo "WARNING: Gave up waiting for mysqld to exit!" sleep 15 fi fi } # Restart mysqld: mysqld_restart() { mysqld_stop mysqld_start } case "$1" in 'start') mysqld_start ;; 'stop') mysqld_stop ;; 'restart') mysqld_restart ;; *) echo "usage $0 start|stop|restart" esac But there's also an unexpected init script on the machine, named /etc/init.d/mysql: #!/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # MySQL daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. # When this is done the mysql server will be started when the machine is # started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 64 36 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO # If you install MySQL on some other places than /usr, then you # have to do one of the following things for this script to work: # # - Run this script from within the MySQL installation directory # - Create a /etc/my.cnf file with the following information: # [mysqld] # basedir=<path-to-mysql-installation-directory> # - Add the above to any other configuration file (for example ~/.my.ini) # and copy my_print_defaults to /usr/bin # - Add the path to the mysql-installation-directory to the basedir variable # below. # # If you want to affect other MySQL variables, you should make your changes # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get # overwritten by settings in the MySQL configuration files. #basedir= #datadir= # Default value, in seconds, afterwhich the script should timeout waiting # for server start. # Value here is overriden by value in my.cnf. # 0 means don't wait at all # Negative numbers mean to wait indefinitely service_startup_timeout=900 # The following variables are only set for letting mysql.server find things. # Set some defaults pid_file=/var/run/mysql/mysql.pid server_pid_file=/var/run/mysql/mysql.pid use_mysqld_safe=1 user=mysql if test -z "$basedir" then basedir=/usr bindir=/usr/bin if test -z "$datadir" then datadir=/var/lib/mysql fi sbindir=/usr/sbin libexecdir=/usr/libexec else bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" fi # datadir_set is used to determine if datadir was set (and so should be # *not* set inside of the --basedir= handler.) datadir_set= # # Use LSB init script functions for printing messages, if possible # lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then . $lsb_functions else log_success_msg() { echo " SUCCESS! $@" } log_failure_msg() { echo " ERROR! $@" } fi PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin export PATH mode=$1 # start or stop shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action # Expected: "--skip-networking --skip-grant-tables" # They are not checked here, intentionally, as it is the resposibility # of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c='\c' ;; esac parse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'` datadir_set=1 ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --pid-file=*) server_pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --use-mysqld_safe) use_mysqld_safe=1;; --use-manager) use_mysqld_safe=0;; esac done } parse_manager_arguments() { for arg do case "$arg" in --pid-file=*) pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; esac done } wait_for_pid () { verb="$1" manager_pid="$2" # process ID of the program operating on the pid-file i=0 avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in 'created') # wait for a PID-file to pop into existence. test -s $pid_file && i='' && break ;; 'removed') # wait for this PID-file to disappear test ! -s $pid_file && i='' && break ;; *) echo "wait_for_pid () usage: wait_for_pid created|removed manager_pid" exit 1 ;; esac # if manager isn't running, then pid-file will never be updated if test -n "$manager_pid"; then if kill -0 "$manager_pid" 2>/dev/null; then : # the manager still runs else # The manager may have exited between the last pid-file check and now. if test -n "$avoid_race_condition"; then avoid_race_condition="" continue # Check again. fi # there's nothing that will affect the file. log_failure_msg "Manager of pid-file quit without updating file." return 1 # not waiting any more. fi fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done if test -z "$i" ; then log_success_msg return 0 else log_failure_msg return 1 fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then print_defaults="$bindir/mysql_print_defaults" else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat='^[^=]*basedir[^=]*=$.*$$' dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` for d in $dirs do d=`echo $d | sed -e 's/[ ]//g'` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi if test -x "$d/bin/mysql_print_defaults" then print_defaults="$d/bin/mysql_print_defaults" break fi done fi # Hope it's in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from 'basedir'. If there is no defaults file there # check if it's in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then extra_args="-e $basedir/my.cnf" else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # Look for the pidfile parse_manager_arguments `$print_defaults $extra_args manager` # # Set pid file if not given # if test -z "$pid_file" then pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid else case "$pid_file" in /* ) ;; * ) pid_file="$datadir/$pid_file" ;; esac fi if test -z "$server_pid_file" then server_pid_file=$datadir/`/bin/hostname`.pid else case "$server_pid_file" in /* ) ;; * ) server_pid_file="$datadir/$server_pid_file" ;; esac fi case "$mode" in 'start') # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir manager=$bindir/mysqlmanager if test -x $libexecdir/mysqlmanager then manager=$libexecdir/mysqlmanager elif test -x $sbindir/mysqlmanager then manager=$sbindir/mysqlmanager fi echo $echo_n "Starting MySQL" if test -x $manager -a "$use_mysqld_safe" = "0" then if test -n "$other_args" then log_failure_msg "MySQL manager does not support options '$other_args'" exit 1 fi # Give extra arguments to mysqld with the my.cnf file. This script may # be overwritten at next upgrade. $manager --user=$user --pid-file=$pid_file >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysqlmanager fi exit $return_value elif test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. pid_file=$server_pid_file $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysql fi exit $return_value else log_failure_msg "Couldn't find MySQL manager ($manager) or server ($bindir/mysqld_safe)" fi ;; 'stop') # Stop daemon. We use a signal here to avoid having to know the # root password. # The RedHat / SuSE lock directory to remove lock_dir=/var/lock/subsys/mysqlmanager # If the manager pid_file doesn't exist, try the server's if test ! -s "$pid_file" then pid_file=$server_pid_file lock_dir=/var/lock/subsys/mysql fi if test -s "$pid_file" then mysqlmanager_pid=`cat $pid_file` echo $echo_n "Shutting down MySQL" kill $mysqlmanager_pid # mysqlmanager should remove the pid_file when it exits, so wait for it. wait_for_pid removed "$mysqlmanager_pid"; return_value=$? # delete lock for RedHat / SuSE if test -f $lock_dir then rm -f $lock_dir fi exit $return_value else log_failure_msg "MySQL manager or server PID file could not be found!" fi ;; 'restart') # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop $other_args; then $0 start $other_args else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; 'reload'|'force-reload') if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch $server_pid_file else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; 'status') # First, check to see if pid file exists if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pidof $sbindir/mysqld` if test -z $mysqld_pid ; then if test "$use_mysqld_safe" = "0" ; then lockfile=/var/lock/subsys/mysqlmanager else lockfile=/var/lock/subsys/mysql fi if test -f $lockfile ; then log_failure_msg "MySQL is not running, but lock exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; *) # usage echo "Usage: $0 {start|stop|restart|reload|force-reload|status} [ MySQL server options ]" exit 1 ;; esac exit 0 An unimportant aside: The previous users of the machine kept a messy home directory. Their home directory was /root. I've pasted a copy at http://www.pastebin.ca/2167496. My question: Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there? P.S. This question is far from perfect. Please feel free to edit it.

Read the article

Using jQuery to POST Form Data to an ASP.NET ASMX AJAX Web Service

- by Rick Strahl

The other day I got a question about how to call an ASP.NET ASMX Web Service or PageMethods with the POST data from a Web Form (or any HTML form for that matter). The idea is that you should be able to call an endpoint URL, send it regular urlencoded POST data and then use Request.Form[] to retrieve the posted data as needed. My first reaction was that you can’t do it, because ASP.NET ASMX AJAX services (as well as Page Methods and WCF REST AJAX Services) require that the content POSTed to the server is posted as JSON and sent with an application/json or application/x-javascript content type. IOW, you can’t directly call an ASP.NET AJAX service with regular urlencoded data. Note that there are other ways to accomplish this. You can use ASP.NET MVC and a custom route, an HTTP Handler or separate ASPX page, or even a WCF REST service that’s configured to use non-JSON inputs. However if you want to use an ASP.NET AJAX service (or Page Methods) with a little bit of setup work it’s actually quite easy to capture all the form variables on the client and ship them up to the server. The basic steps needed to make this happen are: Capture form variables into an array on the client with jQuery’s .serializeArray() function Use $.ajax() or my ServiceProxy class to make an AJAX call to the server to send this array On the server create a custom type that matches the .serializeArray() name/value structure Create extension methods on NameValue[] to easily extract form variables Create a [WebMethod] that accepts this name/value type as an array (NameValue[]) This seems like a lot of work but realize that steps 3 and 4 are a one time setup step that can be reused in your entire site or multiple applications. Let’s look at a short example that looks like this as a base form of fields to ship to the server: The HTML for this form looks something like this: <div id="divMessage" class="errordisplay" style="display: none"> </div> <div> <div class="label">Name:</div> <div><asp:TextBox runat="server" ID="txtName" /></div> </div> <div> <div class="label">Company:</div> <div><asp:TextBox runat="server" ID="txtCompany"/></div> </div> <div> <div class="label" ></div> <div> <asp:DropDownList runat="server" ID="lstAttending"> <asp:ListItem Text="Attending" Value="Attending"/> <asp:ListItem Text="Not Attending" Value="NotAttending" /> <asp:ListItem Text="Maybe Attending" Value="MaybeAttending" /> <asp:ListItem Text="Not Sure Yet" Value="NotSureYet" /> </asp:DropDownList> </div> </div> <div> <div class="label">Special Needs:<br /> <small>(check all that apply)</small></div> <div> <asp:ListBox runat="server" ID="lstSpecialNeeds" SelectionMode="Multiple"> <asp:ListItem Text="Vegitarian" Value="Vegitarian" /> <asp:ListItem Text="Vegan" Value="Vegan" /> <asp:ListItem Text="Kosher" Value="Kosher" /> <asp:ListItem Text="Special Access" Value="SpecialAccess" /> <asp:ListItem Text="No Binder" Value="NoBinder" /> </asp:ListBox> </div> </div> <div> <div class="label"></div> <div> <asp:CheckBox ID="chkAdditionalGuests" Text="Additional Guests" runat="server" /> </div> </div> <hr /> <input type="button" id="btnSubmit" value="Send Registration" /> The form includes a few different kinds of form fields including a multi-selection listbox to demonstrate retrieving multiple values. Setting up the Server Side [WebMethod] The [WebMethod] on the server we’re going to call is going to be very simple and just capture the content of these values and echo then back as a formatted HTML string. Obviously this is overly simplistic but it serves to demonstrate the simple point of capturing the POST data on the server in an AJAX callback. public class PageMethodsService : System.Web.Services.WebService { [WebMethod] public string SendRegistration(NameValue[] formVars) { StringBuilder sb = new StringBuilder(); sb.AppendFormat("Thank you {0}, <br/><br/>", HttpUtility.HtmlEncode(formVars.Form("txtName"))); sb.AppendLine("You've entered the following: <hr/>"); foreach (NameValue nv in formVars) { // strip out ASP.NET form vars like _ViewState/_EventValidation if (!nv.name.StartsWith("__")) { if (nv.name.StartsWith("txt") || nv.name.StartsWith("lst") || nv.name.StartsWith("chk")) sb.Append(nv.name.Substring(3)); else sb.Append(nv.name); sb.AppendLine(": " + HttpUtility.HtmlEncode(nv.value) + "<br/>"); } } sb.AppendLine("<hr/>"); string[] needs = formVars.FormMultiple("lstSpecialNeeds"); if (needs == null) sb.AppendLine("No Special Needs"); else { sb.AppendLine("Special Needs: <br/>"); foreach (string need in needs) { sb.AppendLine("  " + need + "<br/>"); } } return sb.ToString(); } } The key feature of this method is that it receives a custom type called NameValue[] which is an array of NameValue objects that map the structure that the jQuery .serializeArray() function generates. There are two custom types involved in this: The actual NameValue type and a NameValueExtensions class that defines a couple of extension methods for the NameValue[] array type to allow for single (.Form()) and multiple (.FormMultiple()) value retrieval by name. The NameValue class is as simple as this and simply maps the structure of the array elements of .serializeArray(): public class NameValue { public string name { get; set; } public string value { get; set; } } The extension method class defines the .Form() and .FormMultiple() methods to allow easy retrieval of form variables from the returned array: /// <summary> /// Simple NameValue class that maps name and value /// properties that can be used with jQuery's /// $.serializeArray() function and JSON requests /// </summary> public static class NameValueExtensionMethods { /// <summary> /// Retrieves a single form variable from the list of /// form variables stored /// </summary> /// <param name="formVars"></param> /// <param name="name">formvar to retrieve</param> /// <returns>value or string.Empty if not found</returns> public static string Form(this NameValue[] formVars, string name) { var matches = formVars.Where(nv => nv.name.ToLower() == name.ToLower()).FirstOrDefault(); if (matches != null) return matches.value; return string.Empty; } /// <summary> /// Retrieves multiple selection form variables from the list of /// form variables stored. /// </summary> /// <param name="formVars"></param> /// <param name="name">The name of the form var to retrieve</param> /// <returns>values as string[] or null if no match is found</returns> public static string[] FormMultiple(this NameValue[] formVars, string name) { var matches = formVars.Where(nv => nv.name.ToLower() == name.ToLower()).Select(nv => nv.value).ToArray(); if (matches.Length == 0) return null; return matches; } } Using these extension methods it’s easy to retrieve individual values from the array: string name = formVars.Form("txtName"); or multiple values: string[] needs = formVars.FormMultiple("lstSpecialNeeds"); if (needs != null) { // do something with matches } Using these functions in the SendRegistration method it’s easy to retrieve a few form variables directly (txtName and the multiple selections of lstSpecialNeeds) or to iterate over the whole list of values. Of course this is an overly simple example – in typical app you’d probably want to validate the input data and save it to the database and then return some sort of confirmation or possibly an updated data list back to the client. Since this is a full AJAX service callback realize that you don’t have to return simple string values – you can return any of the supported result types (which are most serializable types) including complex hierarchical objects and arrays that make sense to your client code. POSTing Form Variables from the Client to the AJAX Service To call the AJAX service method on the client is straight forward and requires only use of little native jQuery plus JSON serialization functionality. To start add jQuery and the json2.js library to your page: <script src="Scripts/jquery.min.js" type="text/javascript"></script> <script src="Scripts/json2.js" type="text/javascript"></script> json2.js can be found here (be sure to remove the first line from the file): http://www.json.org/json2.js It’s required to handle JSON serialization for those browsers that don’t support it natively. With those script references in the document let’s hookup the button click handler and call the service: $(document).ready(function () { $("#btnSubmit").click(sendRegistration); }); function sendRegistration() { var arForm = $("#form1").serializeArray(); $.ajax({ url: "PageMethodsService.asmx/SendRegistration", type: "POST", contentType: "application/json", data: JSON.stringify({ formVars: arForm }), dataType: "json", success: function (result) { var jEl = $("#divMessage"); jEl.html(result.d).fadeIn(1000); setTimeout(function () { jEl.fadeOut(1000) }, 5000); }, error: function (xhr, status) { alert("An error occurred: " + status); } }); } The key feature in this code is the $("#form1").serializeArray(); call which serializes all the form fields of form1 into an array. Each form var is represented as an object with a name/value property. This array is then serialized into JSON with: JSON.stringify({ formVars: arForm }) The format for the parameter list in AJAX service calls is an object with one property for each parameter of the method. In this case its a single parameter called formVars and we’re assigning the array of form variables to it. The URL to call on the server is the name of the Service (or ASPX Page for Page Methods) plus the name of the method to call. On return the success callback receives the result from the AJAX callback which in this case is the formatted string which is simply assigned to an element in the form and displayed. Remember the result type is whatever the method returns – it doesn’t have to be a string. Note that ASP.NET AJAX and WCF REST return JSON data as a wrapped object so the result has a ‘d’ property that holds the actual response: jEl.html(result.d).fadeIn(1000); Slightly simpler: Using ServiceProxy.js If you want things slightly cleaner you can use the ServiceProxy.js class I’ve mentioned here before. The ServiceProxy class handles a few things for calling ASP.NET and WCF services more cleanly: Automatic JSON encoding Automatic fix up of ‘d’ wrapper property Automatic Date conversion on the client Simplified error handling Reusable and abstracted To add the service proxy add: <script src="Scripts/ServiceProxy.js" type="text/javascript"></script> and then change the code to this slightly simpler version: <script type="text/javascript"> proxy = new ServiceProxy("PageMethodsService.asmx/"); $(document).ready(function () { $("#btnSubmit").click(sendRegistration); }); function sendRegistration() { var arForm = $("#form1").serializeArray(); proxy.invoke("SendRegistration", { formVars: arForm }, function (result) { var jEl = $("#divMessage"); jEl.html(result).fadeIn(1000); setTimeout(function () { jEl.fadeOut(1000) }, 5000); }, function (error) { alert(error.message); } ); } The code is not very different but it makes the call as simple as specifying the method to call, the parameters to pass and the actions to take on success and error. No more remembering which content type and data types to use and manually serializing to JSON. This code also removes the “d” property processing in the response and provides more consistent error handling in that the call always returns an error object regardless of a server error or a communication error unlike the native $.ajax() call. Either approach works and both are pretty easy. The ServiceProxy really pays off if you use lots of service calls and especially if you need to deal with date values returned from the server on the client. Summary Making Web Service calls and getting POST data to the server is not always the best option – ASP.NET and WCF AJAX services are meant to work with data in objects. However, in some situations it’s simply easier to POST all the captured form data to the server instead of mapping all properties from the input fields to some sort of message object first. For this approach the above POST mechanism is useful as it puts the parsing of the data on the server and leaves the client code lean and mean. It’s even easy to build a custom model binder on the server that can map the array values to properties on an object generically with some relatively simple Reflection code and without having to manually map form vars to properties and do string conversions. Keep in mind though that other approaches also abound. ASP.NET MVC makes it pretty easy to create custom routes to data and the built in model binder makes it very easy to deal with inbound form POST data in its original urlencoded format. The West Wind West Wind Web Toolkit also includes functionality for AJAX callbacks using plain POST values. All that’s needed is a Method parameter to query/form value to specify the method to be called on the server. After that the content type is completely optional and up to the consumer. It’d be nice if the ASP.NET AJAX Service and WCF AJAX Services weren’t so tightly bound to the content type so that you could more easily create open access service endpoints that can take advantage of urlencoded data that is everywhere in existing pages. It would make it much easier to create basic REST endpoints without complicated service configuration. Ah one can dream! In the meantime I hope this article has given you some ideas on how you can transfer POST data from the client to the server using JSON – it might be useful in other scenarios beyond ASP.NET AJAX services as well. Additional Resources ServiceProxy.js A small JavaScript library that wraps $.ajax() to call ASP.NET AJAX and WCF AJAX Services. Includes date parsing extensions to the JSON object, a global dataFilter for processing dates on all jQuery JSON requests, provides cleanup for the .NET wrapped message format and handles errors in a consistent fashion. Making jQuery Calls to WCF/ASMX with a ServiceProxy Client More information on calling ASMX and WCF AJAX services with jQuery and some more background on ServiceProxy.js. Note the implementation has slightly changed since the article was written. ww.jquery.js The West Wind West Wind Web Toolkit also includes ServiceProxy.js in the West Wind jQuery extension library. This version is slightly different and includes embedded json encoding/decoding based on json2.js.© Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery ASP.NET AJAX

Read the article

Adding Unobtrusive Validation To MVCContrib Fluent Html

- by srkirkland

ASP.NET MVC 3 includes a new unobtrusive validation strategy that utilizes HTML5 data-* attributes to decorate form elements. Using a combination of jQuery validation and an unobtrusive validation adapter script that comes with MVC 3, those attributes are then turned into client side validation rules. A Quick Introduction to Unobtrusive Validation To quickly show how this works in practice, assume you have the following Order.cs class (think Northwind) [If you are familiar with unobtrusive validation in MVC 3 you can skip to the next section]: public class Order : DomainObject { [DataType(DataType.Date)] public virtual DateTime OrderDate { get; set; } [Required] [StringLength(12)] public virtual string ShipAddress { get; set; } [Required] public virtual Customer OrderedBy { get; set; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note the System.ComponentModel.DataAnnotations attributes, which provide the validation and metadata information used by ASP.NET MVC 3 to determine how to render out these properties. Now let’s assume we have a form which can edit this Order class, specifically let’s look at the ShipAddress property: @Html.LabelFor(x => x.Order.ShipAddress) @Html.EditorFor(x => x.Order.ShipAddress) @Html.ValidationMessageFor(x => x.Order.ShipAddress) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now the Html.EditorFor() method is smart enough to look at the ShipAddress attributes and write out the necessary unobtrusive validation html attributes. Note we could have used Html.TextBoxFor() or even Html.TextBox() and still retained the same results. If we view source on the input box generated by the Html.EditorFor() call, we get the following: <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" data-val-required="The ShipAddress field is required." data-val-length-max="12" data-val-length="The field ShipAddress must be a string with a maximum length of 12." data-val="true" class="text-box single-line input-validation-error"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } As you can see, we have data-val-* attributes for both required and length, along with the proper error messages and additional data as necessary (in this case, we have the length-max=”12”). And of course, if we try to submit the form with an invalid value, we get an error on the client: Working with MvcContrib’s Fluent Html The MvcContrib project offers a fluent interface for creating Html elements which I find very expressive and useful, especially when it comes to creating select lists. Let’s look at a few quick examples: @this.TextBox(x => x.FirstName).Class("required").Label("First Name:") @this.MultiSelect(x => x.UserId).Options(ViewModel.Users) @this.CheckBox("enabled").LabelAfter("Enabled").Title("Click to enable.").Styles(vertical_align => "middle") @(this.Select("Order.OrderedBy").Options(Model.Customers, x => x.Id, x => x.CompanyName) .Selected(Model.Order.OrderedBy != null ? Model.Order.OrderedBy.Id : "") .FirstOption(null, "--Select A Company--") .HideFirstOptionWhen(Model.Order.OrderedBy != null) .Label("Ordered By:")) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } These fluent html helpers create the normal html you would expect, and I think they make life a lot easier and more readable when dealing with complex markup or select list data models (look ma: no anonymous objects for creating class names!). Of course, the problem we have now is that MvcContrib’s fluent html helpers don’t know about ASP.NET MVC 3’s unobtrusive validation attributes and thus don’t take part in client validation on your page. This is not ideal, so I wrote a quick helper method to extend fluent html with the knowledge of what unobtrusive validation attributes to include when they are rendered. Extending MvcContrib’s Fluent Html Before posting the code, there are just a few things you need to know. The first is that all Fluent Html elements implement the IElement interface (MvcContrib.FluentHtml.Elements.IElement), and the second is that the base System.Web.Mvc.HtmlHelper has been extended with a method called GetUnobtrusiveValidationAttributes which we can use to determine the necessary attributes to include. With this knowledge we can make quick work of extending fluent html: public static class FluentHtmlExtensions { public static T IncludeUnobtrusiveValidationAttributes<T>(this T element, HtmlHelper htmlHelper) where T : MvcContrib.FluentHtml.Elements.IElement { IDictionary<string, object> validationAttributes = htmlHelper .GetUnobtrusiveValidationAttributes(element.GetAttr("name")); foreach (var validationAttribute in validationAttributes) { element.SetAttr(validationAttribute.Key, validationAttribute.Value); } return element; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The code is pretty straight forward – basically we use a passed HtmlHelper to get a list of validation attributes for the current element and then add each of the returned attributes to the element to be rendered. The Extension In Action Now let’s get back to the earlier ShipAddress example and see what we’ve accomplished. First we will use a fluent html helper to render out the ship address text input (this is the ‘before’ case): @this.TextBox("Order.ShipAddress").Label("Ship Address:").Class("class-name") .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } And the resulting HTML: <label id="Order_ShipAddress_Label" for="Order_ShipAddress">Ship Address:</label> <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" class="class-name"> Now let’s do the same thing except here we’ll use the newly written extension method: @this.TextBox("Order.ShipAddress").Label("Ship Address:") .Class("class-name").IncludeUnobtrusiveValidationAttributes(Html) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } And the resulting HTML: <label id="Order_ShipAddress_Label" for="Order_ShipAddress">Ship Address:</label> <input type="text" value="Rua do Paço, 67" name="Order.ShipAddress" id="Order_ShipAddress" data-val-required="The ShipAddress field is required." data-val-length-max="12" data-val-length="The field ShipAddress must be a string with a maximum length of 12." data-val="true" class="class-name"> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Excellent! Now we can continue to use unobtrusive validation and have the flexibility to use ASP.NET MVC’s Html helpers or MvcContrib’s fluent html helpers interchangeably, and every element will participate in client side validation. Wrap Up Overall I’m happy with this solution, although in the best case scenario MvcContrib would know about unobtrusive validation attributes and include them automatically (of course if it is enabled in the web.config file). I know that MvcContrib allows you to author global behaviors, but that requires changing the base class of your views, which I am not willing to do. Enjoy!

Read the article

Why does Mac OS X Software Update not work when machine uses Active Directory?

- by Lyndsey Ferguson

My company's IT department is mostly a Windows run operation and in order to become more secure, they are altering the way that the Macintosh computers login to our internal network so that they use Active Directory like their Windows counterparts. I have been given Administrative permission on my Mac and I am able to do most of what I used to be able to do in terms of authentication of software installations. However, there is a problem: the "Software Update" feature doesn't work. What happens is that when I try to get the Mac to perform its Software Updates from the Apple menu, the normal window appears listing what has to be updated; I am able to select what to update and click the "Update" button, but then nothing happens. It doesn't ask for authentication like it used to, the computer doesn't perform any download or installation (it does sometimes ask me to agree to license agreements for iTunes). I can download the updates individually and install them without any issues, but the auto-update fails. I'd rather use the Software Update menu item like I used to: it is much more convenient. Any suggestions on how I can fix this? EDIT Nov 19th, 2009, 10:09 EST: I have posted this question to the Apple Mac OS X Snow Leopard support forum. EDIT Nov 19th, 2009, 12:39 EST:Yes, the Terminal command "sudo softwareupdate --install --all" does work flawlessly. I want to avoid that as my co-workers are generally not comfortable on the Mac. I also tried Chealion's suggestion to delete "~/Library/Preferences/com.apple.SoftwareUpdate.plist" and "/Library/Preferences/com.apple.SoftwareUpdate.plist", Software Update still fails. However, I did get diagnostic messages in the Console (below). I've deleted the MS Office Package Receipts and examined the suhelperd (Software Update Helper Daemon?); it appears that suhelperd is crashing and that explains why it doesn't work. I've submitted a bug report to Apple (radar://7408619). Here are the Console diagnostic messages: 11/19/09 12:36:44 PM com.apple.suhelperd[66829] terminate called after throwing an instance of 'NSException' 11/19/09 12:36:47 PM com.apple.launchd[1] (com.apple.suhelperd[66829]) Job appears to have crashed: Abort trap 11/19/09 12:36:48 PM com.apple.ReportCrash.Root[66830] 2009-11-19 12:36:48.275 ReportCrash[66830:2703] Saved crash report for suhelperd[66829] version ??? (???) to /Library/Logs/DiagnosticReports/suhelperd_2009-11-19-123648_localhost.crash 11/19/09 12:36:54 PM com.apple.launchd[1] (com.apple.suhelperd) Throttling respawn: Will start in 1 seconds 11/19/09 12:36:55 PM com.apple.suhelperd[66836] terminate called after throwing an instance of 'NSException' 11/19/09 12:36:55 PM com.apple.launchd[1] (com.apple.suhelperd[66836]) Job appears to have crashed: Abort trap 11/19/09 12:36:56 PM com.apple.ReportCrash.Root[66830] 2009-11-19 12:36:56.017 ReportCrash[66830:2f03] Saved crash report for suhelperd[66836] version ??? (???) to /Library/Logs/DiagnosticReports/suhelperd_2009-11-19-123655_localhost.crash 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_automator.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_automator_workflow.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_autoupdate.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_clipart.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_core.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_dock.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_entourage.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_entourage_help_std.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_equationeditor.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_errorreporting.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_excel.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_excel_help_std.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_fonts.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_graph.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_helpviewer.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_launch.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_ooxml.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_orgchart.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_powerpoint.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_powerpoint_help_std.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_brazilian.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_danish.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_dutch.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_english.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_finnish.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_french.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_german.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_italian.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_japanese.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_norwegian.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_portuguese.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_spanish.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_proofing_swedish.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_required.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_silverlight.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_sounds.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_word.pkg 11/19/09 12:36:58 PM Software Update[66826] PackageKit: *** Missing bundle identifier: /Library/Receipts/Office2008_en_word_help_std.pkg 11/19/09 12:37:26 PM com.apple.suhelperd[66839] terminate called after throwing an instance of 'NSException' 11/19/09 12:37:26 PM com.apple.launchd[1] (com.apple.suhelperd[66839]) Job appears to have crashed: Abort trap 11/19/09 12:37:26 PM com.apple.ReportCrash.Root[66830] 2009-11-19 12:37:26.929 ReportCrash[66830:2b07] Saved crash report for suhelperd[66839] version ??? (???) to /Library/Logs/DiagnosticReports/suhelperd_2009-11-19-123726_localhost.crash And here is the suhelperd crash report: Process: suhelperd [66839] Path: /System/Library/PrivateFrameworks/SoftwareUpdate.framework/Versions/A/Resources/suhelperd Identifier: suhelperd Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [1] Date/Time: 2009-11-19 12:37:26.473 -0500 OS Version: Mac OS X 10.6.2 (10C540) Report Version: 6 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: abort() called *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSCFArray objectAtIndex:]: index (0) beyond bounds (0)' *** Call stack at first throw: ( 0 CoreFoundation 0x00007fff859a9444 __exceptionPreprocess + 180 1 libobjc.A.dylib 0x00007fff8787e0f3 objc_exception_throw + 45 2 CoreFoundation 0x00007fff859a9267 +[NSException raise:format:arguments:] + 103 3 CoreFoundation 0x00007fff859a91f4 +[NSException raise:format:] + 148 4 Foundation 0x00007fff855da080 _NSArrayRaiseBoundException + 122 5 Foundation 0x00007fff8553cb81 -[NSCFArray objectAtIndex:] + 75 6 Admin 0x00007fff8107920e +[User(UserPrivate) _userWithInfo:attributes:] + 71 7 Admin 0x00007fff81080d6b +[User findUserByID:searchParent:] + 404 8 suhelperd 0x0000000100001274 0x0 + 4294972020 9 suhelperd 0x0000000100002240 0x0 + 4294976064 10 suhelperd 0x00000001000053b1 0x0 + 4294988721 11 suhelperd 0x00000001000044b3 0x0 + 4294984883 12 suhelperd 0x0000000100004154 0x0 + 4294984020 13 libSystem.B.dylib 0x00007fff83eb60d8 mach_msg_server + 357 14 suhelperd 0x00000001000036eb 0x0 + 4294981355 15 suhelperd 0x0000000100002a1f 0x0 + 4294978079 16 suhelperd 0x0000000100001080 0x0 + 4294971520 ) Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 libSystem.B.dylib 0x00007fff83e86fe6 __kill + 10 1 libSystem.B.dylib 0x00007fff83f27e32 abort + 83 2 libstdc++.6.dylib 0x00007fff873cf5d2 __tcf_0 + 0 3 libobjc.A.dylib 0x00007fff87881d29 _objc_terminate + 100 4 libstdc++.6.dylib 0x00007fff873cdae1 __cxxabiv1::__terminate(void (*)()) + 11 5 libstdc++.6.dylib 0x00007fff873cdb16 __cxxabiv1::__unexpected(void (*)()) + 0 6 libstdc++.6.dylib 0x00007fff873cdbfc __gxx_exception_cleanup(_Unwind_Reason_Code, _Unwind_Exception*) + 0 7 libobjc.A.dylib 0x00007fff8787e192 object_getIvar + 0 8 com.apple.CoreFoundation 0x00007fff859a9267 +[NSException raise:format:arguments:] + 103 9 com.apple.CoreFoundation 0x00007fff859a91f4 +[NSException raise:format:] + 148 10 com.apple.Foundation 0x00007fff855da080 _NSArrayRaiseBoundException + 122 11 com.apple.Foundation 0x00007fff8553cb81 -[NSCFArray objectAtIndex:] + 75 12 com.apple.framework.Admin 0x00007fff8107920e +[User(UserPrivate) _userWithInfo:attributes:] + 71 13 com.apple.framework.Admin 0x00007fff81080d6b +[User findUserByID:searchParent:] + 404 14 suhelperd 0x0000000100001274 0x100000000 + 4724 15 suhelperd 0x0000000100002240 0x100000000 + 8768 16 suhelperd 0x00000001000053b1 0x100000000 + 21425 17 suhelperd 0x00000001000044b3 0x100000000 + 17587 18 suhelperd 0x0000000100004154 0x100000000 + 16724 19 libSystem.B.dylib 0x00007fff83eb60d8 mach_msg_server + 357 20 suhelperd 0x00000001000036eb 0x100000000 + 14059 21 suhelperd 0x0000000100002a1f 0x100000000 + 10783 22 suhelperd 0x0000000100001080 0x100000000 + 4224 Thread 1: Dispatch queue: com.apple.libdispatch-manager 0 libSystem.B.dylib 0x00007fff83e51bba kevent + 10 1 libSystem.B.dylib 0x00007fff83e53a85 _dispatch_mgr_invoke + 154 2 libSystem.B.dylib 0x00007fff83e5375c _dispatch_queue_invoke + 185 3 libSystem.B.dylib 0x00007fff83e53286 _dispatch_worker_thread2 + 244 4 libSystem.B.dylib 0x00007fff83e52bb8 _pthread_wqthread + 353 5 libSystem.B.dylib 0x00007fff83e52a55 start_wqthread + 13 Thread 2: 0 libSystem.B.dylib 0x00007fff83e529da __workq_kernreturn + 10 1 libSystem.B.dylib 0x00007fff83e52dec _pthread_wqthread + 917 2 libSystem.B.dylib 0x00007fff83e52a55 start_wqthread + 13 Thread 0 crashed with X86 Thread State (64-bit): rax: 0x0000000000000000 rbx: 0x00007fff707d7298 rcx: 0x00007fff5fbff868 rdx: 0x0000000000000000 rdi: 0x0000000000010517 rsi: 0x0000000000000006 rbp: 0x00007fff5fbff880 rsp: 0x00007fff5fbff868 r8: 0x00007fff707da9e0 r9: 0x0000000000000063 r10: 0x00007fff83e83026 r11: 0x0000000000000202 r12: 0x00007fff85a2dca1 r13: 0x0000000000000000 r14: 0x00007fff70bea228 r15: 0x00007fff5fbffb10 rip: 0x00007fff83e86fe6 rfl: 0x0000000000000202 cr2: 0x00007fff70e3afd0

Search Results

Search found 10055 results on 403 pages for 'shift company'.

Page 399/403 | < Previous Page | 395 396 397 398 399 400 401 402 403 | Next Page >

- by DuffDuff

- by Gage

- by user579098

- by Tim Visher

- by Frank

- by lewisblackfan

- by Tim

- by ncain187

- by bhakti

- by John Rudy

- by Jacob

- by SueP

- by ThaSaleni

- by Zozo

- by moviemaniac

- by Peter Lea

- by menormedia

- by Guillaume Cernier

- by Avidev9

- by arungupta

- by dwahlin

- by jasonspiro

- by Rick Strahl

- by srkirkland

- by Lyndsey Ferguson

< Previous Page | 395 396 397 398 399 400 401 402 403 | Next Page >