Search Results

Search found 575 results on 23 pages for 'aaa'.

Page 4/23 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• How to do a login page for third party service without letting them sign on?

  - by AAA

  We have a unique situation (at least for me, first time seeing this). We have a web form where accountants can fill in requests and that part is taken care of. But after their login we redirect them to a third-party website where we need more information from them. The process is crazy right now since we have to give our account login info to all people filing with us. So is there a way in PHP or any other solution where we can after that form on our website auto login with our information to that third party website in a way that our credentials are not visible to the users using the service?

  Read the article

• How to scrub a document of all text between brackets with find and replace

  - by sam

  I have a log file and I need to find all instances of <password> hash here </password> and remove the hash and replace it with some dummy text like aaa-aaa-aaa-aaaa. The recurring search argument is anything that matches a bracket that starts with <password> and ends with </password>. All the hashes being replaced will be different. What's the easiest way to go a bout this? The log is on a windows machine. Probably easiest would be to use MS word for me, unless it's achievable with wordpad, notepad, or some other light weight editor like textpad. thanks

  Read the article

• Is it necessary to memorize codes?

  - by AAA

  I am a new developer, who just got hired at a big company. I don't know how but I guess they are desperate. However, I am well-versed with HTML5/CSS3 though things change and new things are released and I keep up with as much as I can. But this job required me to hand-code Javascript, know Jquery and Ajax. I have been exposed to this a bit but I am not sure if I can hand-code Javascript. My question is, is it necessary to memorize all there is about Javascript or are there a few key things that I should know how to hand-code because looking at javascript code it seems there are lots of lines code! Please point me in the right direction.

  Read the article

• Asterisk Register username with special character like "@"

  - by Najibul Huq

  I am using a SIP provider that has provided me with a username like: [email protected] (Note this is only the username part) And has a numerical password. My Register string looks something like this: [email protected]:[email protected] But this is not working, as asterisk is only sending the first part +112223344 before the first @. My provider is adamant about having the full form of it. This is the first time I am facing this issue that is quite unusual for me. Please help.

  Read the article

• Is it necessary to memorize code?

  - by AAA

  I am a new developer, who just got hired at a big company. I don't know how but I guess they are desperate. However, I am well-versed with HTML5/CSS3 though things change and new things are released and I keep up with as much as I can. But this job required me to hand-code Javascript, know Jquery and Ajax. I have been exposed to this a bit but I am not sure if I can hand-code Javascript. My question is, is it necessary to memorize all there is about Javascript or are there a few key things that I should know how to hand-code because looking at javascript code it seems there are lots of lines code! Please point me in the right direction.

  Read the article

• How does having assets saved on a secondary domain(s) reduce the load time of the website?

  - by AAA

  I went for an interview yesterday where I was asked this question: "How does having assets (images/videos) stored on a secondary domain (assets.example.com) reduce the load time of example.com?" To that I answered that by having the code "call" those assets from a secondary website it reduces the traffic that is coming to the main domain and therefore only applying bandwidth to the main domain vs having to also serve bandwidth to request assets. Is that correct? Also, If i am correct, would you say it makes sense to start new websites with this in mind or do you prefer having it done after large traffic rates are achieved?

  Read the article

• JCombobox containing enum values inside a table

  - by Edan

  Hello, I have a class containing Enum with values. (names) In other class I would like to enter inside a table a cell type of JCombobox that will use these enums values. my problem is to combain between string values and the enum. for example the enum class: enum item_Type {entree, main_Meal, Dessert, Drink} for example the table class: setTitle("Add new item" ); setSize(300, 80); setBackground( Color.gray ); // Create a panel to hold all other components topPanel = new JPanel(); topPanel.setLayout( new BorderLayout() ); getContentPane().add( topPanel ); //new JComboBox(item_Type.values()); JComboBox aaa = new JComboBox(); aaa = new JComboBox(item_Type.values()); TableColumn sportColumn = table.getColumnModel().getColumn(2); // Create columns names String columnNames[] = {"Item Description", "Item Type", "Item Price"}; // Create some data String dataValues[][] = {{ "0", aaa, "0" }}; // Create a new table instance table = new JTable( dataValues, columnNames ); // Add the table to a scrolling pane scrollPane = new JScrollPane( table ); topPanel.add( scrollPane, BorderLayout.CENTER ); I know that at the dataValues array I cant use aaa (the enum jcombobox). How can I do that? thanks in advance.

  Read the article

• a + sing in email address

  - by d.andreykiv

  Hi. I need to submit an email address with a "+" sign and validate in on server. But server receives email like "[email protected]" as "aaa [email protected]". I send all data as POST request with following code NSURL* url = [NSURL URLWithString:[NSString stringWithFormat:@"%@%@", url, @"/signUp"]]; NSString *post = [NSString stringWithFormat:@"&email=%@&userName=%@&password=%@", user.email, user.userName, user.password]; NSData *postData = [post dataUsingEncoding:NSASCIIStringEncoding allowLossyConversion:NO]; NSData* data = [self sendRequest:url postData:postData]; post variable before encoding has value &[email protected]&userName=Asdfasdfadsfadsf&password=sdfasdf after encoding it is same &[email protected]&userName=Asdfasdfadsfadsf&password=sdfasdf Method I use to send request looks like following code: -(id) sendRequest:(NSURL*) url postData:(NSData*)postData { // Create request NSMutableURLRequest *request = [[NSMutableURLRequest alloc] init]; NSString *postLength = [NSString stringWithFormat:@"%d",[postData length]]; [request setURL:url]; [request setHTTPMethod:@"POST"]; [request setValue:@"application/x-www-form-urlencoded" forHTTPHeaderField:@"Current-Type"]; [request setValue:postLength forHTTPHeaderField:@"Content-Length"]; [request setHTTPBody:postData]; NSURLResponse *urlResponse; NSData *data = [NSURLConnection sendSynchronousRequest:request returningResponse:&urlResponse error:nil]; [request release]; return data; }

  Read the article

• How to define and use a friend function to a temlate class with the same template?

  - by Narek

  I have written the following code: #include <iostream> using namespace std; template <class T> class AA { T a; public: AA() { a = 7; } friend void print(const AA<T> & z); }; template <class T> void print(const AA<T> & z) { cout<<"Print: "<<z.a<<endl; } void main() { AA<int> a; print<int>(a); } And getting the following error: error C2248: 'AA<T>::a' : cannot access private member declared in class 'AA<T>' 1> with 1> [ 1> T=int 1> ] 1> c:\users\narek\documents\visual studio 2008\projects\aaa\aaa\a.cpp(7) : see declaration of 'AA<T>::a' 1> with 1> [ 1> T=int 1> ] 1> c:\users\narek\documents\visual studio 2008\projects\aaa\aaa\a.cpp(30) : see reference to function template instantiation 'void print<int>(const AA<T> &)' being compiled 1> with 1> [ 1> T=int 1> ] What's wrong?

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• How to iptables forward ppp0 to eth0

  - by HPHPHP2012

  need your help with get it routing properly. I've server with eth0 (external interface) and eth1(internal interface). eth1 is merged into the bridge br0 (172.16.1.1) I've installed the pptp and successfully configured it, so I got ppp0 interface (192.168.91.1) and got my VPN clients successfully connected. So I need your help to manage how to allow my VPN clients use internet connection (eth0). Below my configuration files, any help is much appreciated! Thank you! P.S. VPN clients are Windows Xp, Windows 7, Mac OS X Lion, Ubuntu 12.04, iOS 5.x cat /etc/pptpd.conf #local server ip address localip 192.168.91.1 #remote addresses remoteip 192.168.91.11-254,192.168.91.10 #translating ip addresses on this interface bcrelay br0 cat /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 nodefaultroute lock nobsdcomp auth logfile /var/log/pptpd.log cat /etc/nat-up #!/bin/sh SERVER_IP="aaa.aaa.aaa.aaa" LOCAL_IP="172.16.1.1" #eth0 with public ip PUBLIC="eth0" #br0 is internal bridge on eth1 interface INTERNAL="br0" #vpn VPN="ppp0" #local LOCAL="lo" iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -i $LOCAL -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i $PUBLIC -j ACCEPT ####CLEAR CONFIG#### #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -m state --state ESTABLISHED,RELATED -j ACCEPT #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -j ACCEPT #iptables -A FORWARD -i $INTERNAL -o $PUBLIC -j ACCEPT #iptables -t nat -A POSTROUTING -j MASQUERADE ####THIS PART IS NOT HANDLING IT#### iptables -A FORWARD -i $PUBLIC -o $VPN -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i $PUBLIC -o $VPN -j ACCEPT iptables -A FORWARD -s 192.168.91.0/24 -o $PUBLIC -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.91.0/24 -o $PUBLIC -j MASQUERADE # VPN - PPTPD iptables -A INPUT -p gre -s 0/0 -j ACCEPT iptables -A OUTPUT -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --dport 1723 -j ACCEPT #SSH iptables -A INPUT -p tcp --dport 2222 -j ACCEPT iptables -A OUTPUT -p tcp --sport 2222 -j ACCEPT #BLACKLIST BLOCKDB="/etc/ip.blocked" IPS=$(grep -Ev "^#" $BLOCKDB) for i in $IPS do iptables -A INPUT -s $i -j DROP iptables -A OUTPUT -d $i -j DROP done

  Read the article

• Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

  - by milkandtang

  I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

  Read the article

• Use sed command to replace , appearing between numbers

  - by Saurabh

  I have a CSV file where data are in the following format |001|,|abc,def|,123456,789,|aaa|,|bbb|,444,555,666 I want to replace only those "," that appears between numbers with some other character like say SOH or $ or * other "," appearing in the line should not get replaced i.e. to say I wish to have following output |001|,|abc,def|,123456*789,|aaa|,|bbb|,444*555*666 Can someone please help me with sed command pattern to get the above desired output

  Read the article

• grep not functioning correctly

  - by ak0

  I've been happily using grep for many years without any issues, but since today it quit working. During the past hour I tried this and that, but enough is enough, I'm posting the bastard here: On the simplest command like grep 'aaa' file.txt I'm getting this: grep: aaa: No such file or directory So grep does not interpret the first argument as the pattern as it should, but treats it as a path. Please help me, I'm going crazy '-(

  Read the article

• Install a file which should be removed only on real uninstall and never overwritten

  - by Viv Coco

  When I install my application, along with the binaries, a conf file is installed that the user can change as he needs (it's actually the user data file). I would like this file to not be overwritten or deleted when a repair, upgrade, modify happens and it should be deleted only when a real uninstall happens. In other words: this conf file is installed along with the binaries and should never be touched again (overwritten/deleted) until a real uninstall happens (not repairs, modifies, upgrades) in which case it should be deleted. So I was thinking of doing: <Component Id="aaa.cfg" Guid="GUID"> <File Id="aaa.cfg" Source="aaa.cfg" KeyPath="yes" /> </Component> But I don't know how could I condition the component so that: 1) the component to be removed only on a real uninstall - not upgrades, repairs, modifies? 2) the file should in no case be overwritten if already exists. Thx, Viv

  Read the article

• Wrapping \NewEnviron into \newenvironment fails

  - by o_O Tync

  Hello! I am trying to wrap an environment created with \NewEnviron (package 'environ') into an old good \newenvironment: \NewEnviron{test}{aaa(\BODY)bbb} \newenvironment{wrapper}{\begin{test}}{\end{test}} \begin{wrapper} debug me \end{wrapper} However, this gives me a strange error: LaTeX Error: \begin{test} on input line 15 ended by \end{wrapper}. LaTeX Error: \begin{wrapper} on input line 15 ended by \end{document}. If I replace \NewEnviron{test}{aaa(\BODY)bbb} with \newenvironment{test}{aaa(}{)bbb} — everything works as expected! It seems like \NewEnviron fails to find its end for some reason. I'm trying to do some magic with 'floatfig' wrapped into a \colorbox so I need a way to convert \colorbox to an environment and wrap it into another one. I can define a new command but it's not a very good idea. Thanks in advance!

  Read the article

• Extract strings in python

  - by shadyabhi

  Basically, I want to extract the strings "AAA", "BBB", "CCC", "DDD" from a text file.. ...... (other text goes here)..... <TD align="left" class=texttd><font class='textfont'>AAA</font></TD> ..... (useless text here)..... <TD align="left" class=texttd><font class='textfont'>BBB</font></TD> ....(more text)..... <TD align="left" class=texttd><font class='textfont'>CCC</font></TD> <TD align="left" class=texttd><font class='textfont'>DDD</font></TD> ......(more text)..... I want something like if I do:- data = foo("file.txt") i get:- data = ['AAA','BBB','CCC','DDD'] What is the best possible way? My file is not big..

  Read the article

• Make a function which returns the original list except the argument

  - by Alex

  I want make a function which takes a list of string and a string and returns NONE if there is no string in the string list, otherwise it returns SOME of the list of string which is the same as the original list of string except it doesn't contain the initial string (pattern): fun my_function (pattern, source_list) = case source_list of [] => NONE | [x] => if pattern = x then SOME [] else NONE | x::xs => if pattern = x then SOME (xs) else SOME (x) :: my_function (pattern, xs) (* this is wrong, what to do here?*) val a = my_function ("haha", ["12", "aaa", "bbb", "haha", "ccc", "ddd"]) (* should be SOME ["12", "aaa", "bbb", "ccc", "ddd"]*) val a2 = my_function ("haha2", ["123", "aaa", "bbb", "haha", "ccc"]) (*should be NONE*) val a3 = my_function ("haha3", ["haha3"]) (* should be SOME []*) I'm confused by the 3rd case: x::xs => .... What should do there? Note that I'd like not to use any sml library function.

  Read the article

• Parser line break if string contains &#8211;

  - by pask

  Hi all, My NSXMLParser breaks on this string: <title>AAA &#8211; BCDEFGQWERTYUIO</title> I parsed it in this way, hope is the right way: - (void) parser: (NSXMLParser *) parser foundCharacters: (NSString *) string{ [...] if ([currentElement isEqualToString:@"title"]) { if (![string isEqualToString:@""]) { [title addObject:string]; NSLog(@"str: %@", string); } } it returns me: str: AAA str: - str: BCDEFGQWERTYUIO But i want to return a single string: str: AAA - BCDEFGQWERTYUIO because it's the correct title. Any idea? Thanks.

  Read the article

• error in mysql syntax in vb.net

  - by user225269

  I get this error, while I'm testing the code below: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '[student](ID, LASTNAME, FIRSTNAME, SCHOOL) VALUES ('333', 'aaa', 'aaa', 'aaa')' at line 1 I just recycled the code that I used in manipulating ms sql database. So the syntax must be wrong. What might be the correct syntax for adding records into mysql database? Here is my current code: idnum = TextBox1.Text lname = TextBox2.Text fname = TextBox3.Text skul = TextBox4.Text Using sqlcon As New MySqlConnection("Server=localhost; Database=testing;Uid=root;Pwd=nitoryolai123$%^;") sqlcon.Open() Dim sqlcom As New MySqlCommand() sqlcom.Connection = sqlcon sqlcom.CommandText = "INSERT INTO [student](ID, LASTNAME, FIRSTNAME, SCHOOL) VALUES (@ParameterID, @ParameterLastName, @ParameterFirstName, @ParameterSchool)" sqlcom.Parameters.AddWithValue("@ParameterID", TextBox1.Text) sqlcom.Parameters.AddWithValue("@ParameterLastName", TextBox2.Text) sqlcom.Parameters.AddWithValue("@ParameterFirstName", TextBox3.Text) sqlcom.Parameters.AddWithValue("@ParameterSchool", TextBox4.Text) sqlcom.ExecuteNonQuery() End Using Please help, thanks

  Read the article

• Finding the average of two number using classes and methods

  - by Have alook

  I want to use methods inside class. Q: find the average of two number using classes and methods. import java.util.*; class aaa { int a,b,sum,avrg; void average() { System.out.println("The average is ="+avrg); avrg=(sum/2); } } class ave { public static void main(String args[]){ aaa n=new aaa(); Scanner m=new Scanner(System.in); System.out.println("write two number"); n.a=m.nextInt(); n.b=m.nextInt(); n.average(); } }

  Read the article

• How to order by results from 2 seperate tables in PHP and MySQL.

  - by Vafello

  I am trying to output results of 2 sql queries to one JSON file. The problem is that I would like to order them ascending by distance which is the result of equation that takes homelat and homelon from the users table and lat, lng from locations table.(basically it takes lattitude and longitude of one point and another and computes the distance between these points). Is it possible to take some parameters from both select queries, compute it and output the result in ascending order? $wynik = mysql_query("SELECT homelat, homelon FROM users WHERE guid='2'") or die(mysql_error()); ; $query = "SELECT * FROM locations WHERE timestamp"; $result = map_query($query); $points = array(); while ($aaa = mysql_fetch_assoc($wynik)) { while ($row = mysql_fetch_array($result, MYSQL_ASSOC)) { array_push($points, array('name'=>$row['name'], 'lat'=>$row['lat'], 'lng'=>$row['lng'], 'description'=>$row['description'], 'eventType'=>$row['eventType'], 'date'=>$row['date'], 'isotime'=>date('c', ($row['timestamp'])), 'homelat'=>$aaa['homelat'], 'homelon'=>$aaa['homelon'])); } echo json_encode(array("Locations"=>$points));

  Read the article

• Using scope, defined in parent model, inside it's child (STI pattern)

  - by Anton

  I implement a class hierarchy using STI pattern class A scope :aaa, where([someField]:[someValue]) end class B < A end The problem is that when I try to call something like: B.limit(5).aaa => SELECT "[table]".* FROM "[table]" WHERE "[table]"."type" IN ('A') AND ([someField] = [someValue]) LIMIT 5 So I am getting 5 objects of type A, which satisfies scope :aaa But I need to do the same with rows where type = "B" Is there any way to use scopes from parent, without redifinning it in childs in STI pattern? Thanks in advance EDITED I just discussed it with my frind and he showed me one important thing. A in not the root class of STI. IN fact whole hierarchy looks like class O < ActiveRecord::Base end class A < O scope ..... ..... end class B < A end maybe the reason is in hierarchy itself?...

  Read the article

• [XSLT] How to add a space when a certain pattern is found?

  - by user349470

  Anyone has any ideas how to add a space between "a" and "boy" when </b><i> pattern is found? <aaa> I am <b>a</b><i>boy</i>. </aaa> Currently I apply template at "aaa" level and then handle <b> and <i> templates separately. However, I have no ways to tell that the </b><i> pattern is found.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >