Search Results

Search found 22847 results on 914 pages for 'case mods'.

Page 4/914 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Switch case assembly level code

    - by puffadder
    Hi All, I am programming C on cygwin windows. After having done a bit of C programming and getting comfortable with the language, I wanted to look under the hood and see what the compiler is doing for the code that I write. So I wrote down a code block containing switch case statements and converted them into assembly using: gcc -S foo.c Here is the C source: switch(i) { case 1: { printf("Case 1\n"); break; } case 2: { printf("Case 2\n"); break; } case 3: { printf("Case 3\n"); break; } case 4: { printf("Case 4\n"); break; } case 5: { printf("Case 5\n"); break; } case 6: { printf("Case 6\n"); break; } case 7: { printf("Case 7\n"); break; } case 8: { printf("Case 8\n"); break; } case 9: { printf("Case 9\n"); break; } case 10: { printf("Case 10\n"); break; } default: { printf("Nothing\n"); break; } } Now the resultant assembly for the same is: movl $5, -4(%ebp) cmpl $10, -4(%ebp) ja L13 movl -4(%ebp), %eax sall $2, %eax movl L14(%eax), %eax jmp *%eax .section .rdata,"dr" .align 4 L14: .long L13 .long L3 .long L4 .long L5 .long L6 .long L7 .long L8 .long L9 .long L10 .long L11 .long L12 .text L3: movl $LC0, (%esp) call _printf jmp L2 L4: movl $LC1, (%esp) call _printf jmp L2 L5: movl $LC2, (%esp) call _printf jmp L2 L6: movl $LC3, (%esp) call _printf jmp L2 L7: movl $LC4, (%esp) call _printf jmp L2 L8: movl $LC5, (%esp) call _printf jmp L2 L9: movl $LC6, (%esp) call _printf jmp L2 L10: movl $LC7, (%esp) call _printf jmp L2 L11: movl $LC8, (%esp) call _printf jmp L2 L12: movl $LC9, (%esp) call _printf jmp L2 L13: movl $LC10, (%esp) call _printf L2: Now, in the assembly, the code is first checking the last case (i.e. case 10) first. This is very strange. And then it is copying 'i' into 'eax' and doing things that are beyond me. I have heard that the compiler implements some jump table for switch..case. Is it what this code is doing? Or what is it doing and why? Because in case of less number of cases, the code is pretty similar to that generated for if...else ladder, but when number of cases increases, this unusual-looking implementation is seen. Thanks in advance.

    Read the article

  • SQL: Using a CASE Statement to update 1000 rows at once

    - by SoLoGHoST
    Ok, I would like to use a CASE STATEMENT for this, but I am lost with this. Basically, I need to update a ton of rows, but just on the "position" column. I need to update all "position" values from 0 - count(position) for each id_layout_position column per id_layout column. OK, here is a pic of what the table looks like: Now let's say I delete the circled row, this will remove position = 2 and give me: 0, 1, 3, 5, 6, 7, and 4. But I want to add something at the end now and make sure that it has the last possible position, but the positions are already messed up, so I need to reorder them like so before I insert the new row: 0, 1, 2, 3, 4, 5, 6. But it must be ordered by lowest first. So 0 stays at 0, 1 stays at 1, 3 gets changed to 2, the 4 at the end gets changed to a 3, 5 gets changed to 4, 6 gets changed to 5, and 7 gets changed to 6. Hopefully you guys get the picture now. I'm completely lost here. Also, note, this table is tiny compared to how fast it can grow in size, so it needs to be able to do this FAST, thus I was thinking on the CASE STATEMENT for an UPDATE QUERY. Here's what I got for a regular update, but I don't wanna throw this into a foreach loop, as it would take forever to do it. I'm using SMF (Simple Machines Forums), so it might look a little different, but the idea is the same, and CASE statements are supported... $smcFunc['db_query']('', ' UPDATE {db_prefix}dp_positions SET position = {int:position} WHERE id_layout_position = {int:id_layout_position} AND id_layout = {int:id_layout}', array( 'position' => $position++, 'id_layout_position' => (int) $id_layout_position, 'id_layout' => (int) $id_layout, ) ); Anyways, I need to apply some sort of CASE on this so that I can auto-increment by 1 all values that it finds and update to the next possible value. I know I'm doing this wrong, even in this QUERY. But I'm totally lost when it comes to CASES. Here's an example of a CASE being used within SMF, so you can see this and hopefully relate: $conditions = ''; foreach ($postgroups as $id => $min_posts) { $conditions .= ' WHEN posts >= ' . $min_posts . (!empty($lastMin) ? ' AND posts <= ' . $lastMin : '') . ' THEN ' . $id; $lastMin = $min_posts; } // A big fat CASE WHEN... END is faster than a zillion UPDATE's ;). $smcFunc['db_query']('', ' UPDATE {db_prefix}members SET id_post_group = CASE ' . $conditions . ' ELSE 0 END' . ($parameter1 != null ? ' WHERE ' . (is_array($parameter1) ? 'id_member IN ({array_int:members})' : 'id_member = {int:members}') : ''), array( 'members' => $parameter1, ) ); Before I do the update, I actually have a SELECT which throws everything I need into arrays like so: $disabled_sections = array(); $positions = array(); while ($row = $smcFunc['db_fetch_assoc']($request)) { if (!isset($disabled_sections[$row['id_group']][$row['id_layout']])) $disabled_sections[$row['id_group']][$row['id_layout']] = array( 'info' => $module_info[$name], 'id_layout_position' => $row['id_layout_position'] ); // Increment the positions... if (!is_null($row['position'])) { if (!isset($positions[$row['id_layout']][$row['id_layout_position']])) $positions[$row['id_layout']][$row['id_layout_position']] = 1; else $positions[$row['id_layout']][$row['id_layout_position']]++; } else $positions[$row['id_layout']][$row['id_layout_position']] = 0; } Thanks, I know if anyone can help me here it's definitely you guys and gals... Anyways, here is my question: How do I use a CASE statement in the first code example, so that I can update all of the rows in the position column from 0 - total # of rows found, that have that id_layout value and that id_layout_position value, and continue this for all different id_layout values in that table? Can I use the arrays above somehow? I'm sure I'll have to use the id_layout and id_layout_position values for this right? But how can I do this? Ok, guy, I get an error, saying "Hacking Attempt" with the following code: // Updating all positions in here. $smcFunc['db_query']('', ' SET @pos = 0; UPDATE {db_prefix}dp_positions SET position=@pos:=@pos+1 ORDER BY id_layout_position, position', array( ) ); Am I doing something wrong? Perhaps SMF has safeguards against this approach?? Perhaps I need to use a CASE STATEMENT instead?

    Read the article

  • What PSU is usually used in mini-ITX cases/chassis?

    - by Subaru Tashiro
    The mini-ITX computer will be a general use computer. Not a dedicated HTPC or Home server. In general use mini-ITX cases, what PSU form factor is usually used? I understand that some case manufacturers provide custom built PSU to fit their case but I prefer to get the ones that use a PSU that follows standard form factors in case a replacement is needed. For example, what PSU fits into general purpose cases by Lian Li? Am I to assume that smaller PSU form factors also affect the possible maximum output?

    Read the article

  • How do you start modding a game without an editor?

    - by Protector one
    I often come across very impressive mods for PC games that don't have an official editor, other development tools or its source code publicly available. (Take this amazing Multiplayer mod for Just Cause 2, for example.) How do you go about creating mods for such games? I'm not talking about replacing the odd texture or 3D model—that sort of thing seems fairly easy given tools to pry them out of game files and put them back in—but more along the lines of adding game behavior. (Tweaking settings files also doesn't count.) Note that I'm not asking "how to create a mod", I just want to know where to start or where to go to learn.

    Read the article

  • Use case modelling for calculator

    - by kyrogue
    hi, i need help modelling a use case diagram from a topic, it will be in java GUI Design a Calculator that 1.Allow user to key in a legitimate arithmetic statement that involves number, operator +, - and bracket '(' and ')' ; 2.When user press “Calculate” button, display result; 3.Some legitimate statement would be ((3+2)-4+2) (equals 3) and (-2+3)-(3-1) (equals -1); 4.You should NOT use a pre-existing function that just take in the statement as a parameter and returns the result but you should write the logic of parsing every character in your code. 5.Store the last statement and answer so it is displayed when user press the “Last calculation” button. i have designed two use case diagrams using UML on netbeans 6.5.1, one of the use case i am not sure whether is it containing too much use cases etc, while the other is what i think could be too vague for the topic.i hope to get some feedback on whether the use case diagram are appropriate, thanks.

    Read the article

  • Query with many CASE statements - optimization

    - by Nemanja Vujacic
    Hi guys, I have one very dirty query that per sure can be optimized because there are so many CASE statements in it! SELECT (CASE pa.KplusTable_Id WHEN 1 THEN sp.sp_id WHEN 2 THEN fw.fw_id WHEN 3 THEN s.sw_Id WHEN 4 THEN id.ia_id END) as Deal_Id, max(CASE pa.KplusTable_Id WHEN 1 THEN sp.Trans_Id WHEN 2 THEN fw.Trans_Id WHEN 3 THEN s.Trans_Id WHEN 4 THEN id.Trans_Id END) as TransId_CurrentMax INTO #MaxRazlicitOdNull FROM #PotencijalniAktuelni pa LEFT JOIN kplus_sp sp (nolock) on sp.sp_id=pa.Deal_Id AND pa.KplusTable_Id=1 LEFT JOIN kplus_fw fw (nolock) on fw.fw_id=pa.Deal_Id AND pa.KplusTable_Id=2 LEFT JOIN dev_sw s (nolock) on s.sw_Id=pa.Deal_Id AND pa.KplusTable_Id=3 LEFT JOIN kplus_ia id (nolock) on id.ia_id=pa.Deal_Id AND pa.KplusTable_Id=4 WHERE isnull(CASE pa.KplusTable_Id WHEN 1 THEN sp.BROJ_TIKETA WHEN 2 THEN fw.BROJ_TIKETA WHEN 3 THEN s.tiket WHEN 4 THEN id.BROJ_TIKETA END, '')<>'' GROUP BY CASE pa.KplusTable_Id WHEN 1 THEN sp.sp_id WHEN 2 THEN fw.fw_id WHEN 3 THEN s.sw_Id WHEN 4 THEN id.ia_id END Because I have same condition couple times, do you have idea how to optimize query, make it simpler and better. All suggestions are welcome! TnX in advance! Nemanja

    Read the article

  • MySQL Query WHERE Including CASE or IF?

    - by handfix
    Strange problem. My Query looks like SELECT DISTINCT ID, `etcetc`, `if/elses over muliple joined tables` FROM table1 AS `t1` # some joins, eventually unrelated in that context WHERE # some standard where statements, they work/ CASE WHEN `t1`.`field` = "foo" THEN (`t1`.`anOtherField` != 123 AND `t1`.`anOtherField` != 456 AND `t1`.`anOtherOtherField` != "some String") WHEN `t1`.`field` = "bar" THEN `t1`.`aSecondOtherField` != 12345 END #ORDER BY CASE etc. Standard Stuff Apperantly MySQL returns a wrong rowcount and I think my problem is in the logic of the WHERE ... CASE statement. Maybe with the brackets? Maybe I should go for operator OR and not AND? Should my the second WHEN include brackets also, even when I only compare one field? Should I use IF and not CASE? Basically I want to exclude some rows with specific values IF theres a specific value in field foo or bar I would try that all out, but it takes a huge amount of time to complete that query... :(

    Read the article

  • Naming case classes in Scala.

    - by Lukasz Lew
    I tend to have this redundant naming in case classes: abstract class MyTree case class MyTreeNode (...) case class MyTreeLeaf (...) Isn't it possible to define Node and Leaf inside of MyTree? What are best practices here?

    Read the article

  • Case Statements versus coded if statements

    - by Eric
    What is more efficient - handling with case statements in sql or handling the same data using if statements in code. I'm asking because my colleague has a huge query that has many case statements. I advised her to take stress off of the DB by coding the case statements. I've found that it is more efficient...but why?

    Read the article

  • Laptop accessories for mobile warrior (light power adapter & case/bag)

    - by wonsungi
    Lugging my X301 between work and home, I realized my laptop's accessories weigh more than the laptop itself! I'm ordering a 2nd AC power adapter so I don't even have to carry one at all, but I may as well get the lightest one possible. My X301 came with a pretty svelt 65W power adapter, but can anyone suggest a lighter power adapter or confirm the weights I've found below? mass vol dimensions W Model ---- ------- ----------- --- ------------------- 210g 149cm^3 108x46x30mm 65W Coolermaster [NA 65] 244g 189cm^3 140x75x18mm 65W ThermalTake [ADP65W0001] 260g 130cm^3 104x43x29mm 65W Lenovo (came with X301) 326g 198cm^3 145x76x18mm 95W Coolermaster [SNA 95] 330g 180cm^3 150x60x20mm 90W Kensington USB [K38030US] Apple's 60W power adapter seems much smaller/lighter than the PC products listed above, so I think a better PC power adapter could exist. There are much smaller 45W "netbook" adapters, but are these too weak for my X301? I would not mind if it just meant the battery couldn't charge while the laptop was on, but I am afraid there will be worse consequences. Also, I have decided to swap my Logitech Kinetik briefcase for a Tom Bihn Ristretto. Less protection, but much lighter, less bulky, and easier to carry. Any suggestions for better laptop cases/bags?

    Read the article

  • Available filesystems for Linux that are case-insensitive?

    - by David
    I have a client whose web application was written entirely in a windows environment and served from windows. Unfortunately there's way to many cases of get "file/At/Somelocation.php" where the file is actually something horrible like "File/at/SomeLocation.PHP". I really don't want to be forced to work in Windows but it will take weeks if not longer to fix all the casing issues. Am I SOL here?

    Read the article

  • Case studies for successful service (project) based software development businesses without constant overtime from its employees [closed]

    - by Ryan Taylor
    I work for an IT company that is primarily services (project) based rather than product based. All software engineers are salaried. The company has set new expectations that everyone should work 48 hours per week instead of 40. Note, this isn't occasional overtime due to crunches. This is the new 40. The reasoning is that this enables the company to provide benefits to its employees such as monetary incentives and training because the company is more profitable. more hours worked = more billable hours = larger profit I understand the need for profitability and the occasional crunch time and have put in the extra hours when it was needed and beneficial to the project. However, I am also very sensitive to work life balance and have raised my concerns about the the new expectation. My employer is open to other methods to increase profitability so I hold hope that we can turn things around before it becomes a horrible place to work. How does a services based company become more profitable without increasing the number of hours expected from it's salaried employees? Are there any case studies showing the pros and cons of consistent overtime? Are there any case studies for a successful service based business model (for software development companies) that does not require consistent overtime from its employees?

    Read the article

  • C# Switch-case Loop for Datagridview cells

    - by Nail Yener
    Hi, I am working on a form with datagridview and webbrowser controls. I have three columns as URL, username and password in datagridview. What I want to do is to automate the login for some websites that I use frequently. For that reason I am not sure if this is the right approach but I created the below code. The problem is with the argument of switch. I will click the row on datagridview and then click the login_button so that the username and password info will be passed to the related fields on the webpage. Why I need a switch-case loop is because all the webpages have different element IDs for username and password fields. As I said, I am not sure if datagridview allows switch-case, I searched the net but couldn't find any samples. private void login_button_Click(object sender, EventArgs e) { switch (dataGridView1.Rows[e.RowIndex].Cells[e.ColumnIndex].Value.ToString()) { case "http://www.website1.com": webBrowser1.Document.GetElementById("username").InnerText = dataGridView1.Rows[3].Cells[3].Value.ToString(); webBrowser1.Document.GetElementById("password").InnerText = dataGridView1.Rows[3].Cells[4].Value.ToString(); return; case "http://www.website2.com": webBrowser1.Document.GetElementById("uname").InnerText = dataGridView1.Rows[4].Cells[3].Value.ToString(); webBrowser1.Document.GetElementById("pswd").InnerText = dataGridView1.Rows[4].Cells[4].Value.ToString(); return; } HtmlElementCollection elements = this.webBrowser1.Document.GetElementsByTagName("Form"); foreach (HtmlElement currentElement in elements) { currentElement.InvokeMember("Login"); } }

    Read the article

  • Help with MySQL Query using CASE statement

    - by hairdresser-101
    I am trying to group a number of customers together based on their "Head Office" or "Parent" location. THis works ok except for a flaw which I didn't forsee when I was developing my system... For customers that did not have a "Parent" (standalone business) I defaulted the parent_id to 0. Therefore, my data would look like this: id parent_id customer 1 0 CustName#1 2 4 CustName#2 - Melbourne 3 4 CustName#2 - Sydney 4 0 CustName#2 (Head Office) What I want to do is Group my results together so that I have one row for CustName#1 and one row for CustName#2 BUT my problem is that there is no parent record for parent_id=0 and these rows are being excluded when using an inner join. I've tried using a case statement but that is not working either (parents are still being ignored) Any help would be greatly appreciated. Here is my query (My CASE is basically trying to get the business_name from the customer table based on the parent_id EXCEPT when the parent_id = 0, THEN just use the customer_name that is listed in the job_summary table): SELECT js.month_of_year, (CASE js.parent_id WHEN 0 THEN js.customer_name ELSE c.business_name END) as customer, SUM(js.jobs), SUM(js.total_cost), sum(js.total_sell) FROM JOB_SUMMARY js INNER JOIN customer c on js.parent_id=c.id group by js.month_of_year, (CASE c.parent_id WHEN 0 THEN js.customer_name ELSE c.business_name END) ORDER BY `customer` ASC

    Read the article

  • dynamical binding or switch/case?

    - by kingkai
    A scene like this: I've different of objects do the similar operation as respective func() implements. There're 2 kinds of solution for func_manager() to call func() according to different objects Solution 1: Use virtual function character specified in c++. func_manager works differently accroding to different object point pass in. class Object{ virtual void func() = 0; } class Object_A : public Object{ void func() {}; } class Object_B : public Object{ void func() {}; } void func_manager(Object* a) { a->func(); } Solution 2: Use plain switch/case. func_manager works differently accroding to different type pass in typedef _type_t { TYPE_A, TYPE_B }type_t; void func_by_a() { // do as func() in Object_A } void func_by_b() { // do as func() in Object_A } void func_manager(type_t type) { switch(type){ case TYPE_A: func_by_a(); break; case TYPE_B: func_by_b(); default: break; } } My Question are 2: 1. at the view point of DESIGN PATTERN, which one is better? 2. at the view point of RUNTIME EFFCIENCE, which one is better? Especailly as the kinds of Object increases, may be up to 10-15 total, which one's overhead oversteps the other? I don't know how switch/case implements innerly, just a bunch of if/else? Thanks very much!

    Read the article

  • MySQL nested CASE error I need help with?

    - by AK
    What I am trying to do here is: IF the records in table todo as identified in $done have a value in the column recurinterval then THEN reset date_scheduled column ELSE just set status_id column to 6 for those records. This is the error I get from mysql_error() ... You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'CASE recurinterval != 0 AND recurinterval IS NOT NULL THEN SET date_sche' at line 2 How can I make this statement work? UPDATE todo CASE recurinterval != 0 AND recurinterval IS NOT NULL THEN SET date_scheduled = CASE recurunit WHEN 'DAY' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval DAY) WHEN 'WEEK' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval WEEK) WHEN 'MONTH' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval MONTH) WHEN 'YEAR' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval YEAR) END WHERE todo_id IN ($done) ELSE SET status_id = 6 WHERE todo_id IN ($done) END The following mySQL statement worked just fine before I revised like above. UPDATE todo SET date_scheduled = CASE recurunit WHEN 'DAY' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval DAY) WHEN 'WEEK' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval WEEK) WHEN 'MONTH' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval MONTH) WHEN 'YEAR' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval YEAR) END WHERE todo_id IN ($done) AND recurinterval != 0 AND recurinterval IS NOT NULL

    Read the article

  • Delphi Typed Constants in Case Statements

    - by Andreas Rejbrand
    What is the most elegant (or least ugly) way of using typed constants in a case statement in Delphi? That is, assume for this question that you need to declare a typed constant as in const MY_CONST: cardinal = $12345678; ... Then the Delphi compiler will not accept case MyExpression of MY_CONST: { Do Something }; ... end; but you need to write case MyExpression of $12345678: { Do Something }; ... end; which is error-prone, hard to update, and not elegant. Is there any trick you can employ to make the compiler insert the value of the constant (preferably by checking the value of the constant under const in the source code, but maybe by looking-up the value at runtime)? We assume here that you will not alter the value of the "constant" at runtime.

    Read the article

  • Sql Server Where Case Then Is Null Else Is Not Null

    - by Fabio Montezuma
    I have a procedure which receive a bit variable called @FL_FINALIZADA. If it is null or false I want to restrict my select to show only the rows that contain null DT_FINALIZACAO values. Otherwise I want to show the rows containing not null DT_FINALIZACAO values. Something like this: SELECT * FROM ... WHERE ... AND (OPE.DT_FINALIZACAO = CASE WHEN (@FL_FINALIZADA <> 1) THEN NULL END OR OPE.DT_FINALIZACAO IS NOT NULL) In this case I receive the message: None of the result expressions in a CASE specification can be NULL. How can I achieve this? Thanks in advance.

    Read the article

  • Case insensitive expectations in Rhino Mocks

    - by user313886
    I'm using Rhino Mocks to expect a call. There is a single parameter which is a string. But I'm not bothered about the case of the string. I want the test to pass even if the case is wrong. So I'm doing the following: //expect log message to be called with a string parameter. //We want to ignore case when verifiyig so we use a constraint instead of a direct parameter Expect.Call(delegate { logger.LogMessage(null); }).Constraints(Is.Matching<string>(x => x.ToLower()=="f2")); It seems a bit log winded. Is there a more sensible way of doing this?

    Read the article

  • Multiple conditions with CASE statements

    - by Pavan Reddy
    I need to query some data. here is the query that i have constructed but which isn't workig fine for me. For this example I am using AdventureWorks database. SELECT * FROM [Purchasing].[Vendor] WHERE PurchasingWebServiceURL LIKE case // In this case I need all rows to be returned if @url is '' or 'ALL' or NULL when (@url IS null OR @url = '' OR @url = 'ALL') then ('''%'' AND PurchasingWebServiceURL IS NULL') //I need all records which are blank here including nulls when (@url = 'blank') then (''''' AND PurchasingWebServiceURL IS NULL' ) //n this condition I need all record which are not like a particular value when (@url = 'fail') then ('''%'' AND PurchasingWebServiceURL NOT LIKE ''%treyresearch%''' ) //Else Match the records which are `LIKE` the input value else '%' + @url + '%' end This is not working for me. How can I have multiple where condition clauses in the THEN of the the same CASE? How can I make this work?

    Read the article

  • The Use-Case Driven Approach to Change Management

    - by Lauren Clark
    In the third entry of the series on OUM and PMI’s Pulse of the Profession, we took a look at the continued importance of change management and risk management. The topic of change management and OUM’s use-case driven approach has come up in few recent conversations. So I thought I would jot down a few thoughts on how the use-case driven approach aids a project team in managing the project’s scope. The use-case model is one of several tools in OUM that is used to establish and manage the project's scope.  Because a use-case model can be understood by both business and IT project team members, it can serve as a bridge for ongoing collaboration as well as a visual diagram that encapsulates all agreed-upon functionality. This makes it a vital artifact in identifying changes to the project’s scope. Here are some of the primary benefits of using the use-case model as part of the effort for establishing and managing project scope: The use-case model quickly communicates scope in a straightforward manner. All project stakeholders can have a common foundation for the decisions regarding architecture and design and how they relate to the project's objectives. Once agreed upon, the model can be put under change control and any updates to the model can then be quickly identified as potentially affecting the project’s scope.  Changes requested or discovered later in the project can be analyzed objectively for their impact on project's budget, resources and schedule. A modular foundation for the design of the software solution can be established in Elaboration.  This permits work to be divided up effectively and executed in so that the most important and riskiest use-cases can be tackled early in the project. The use-case model helps the team make informed decisions about implementation priorities, which allows effective allocation of limited project resources.  This is very helpful in not only managing scope, but in doing iterative and incremental planning which relies heavily on the ability to identify project priorities. Bottom line is that the use-case model gives the project team solid understanding of scope early in the project.  Combine this understanding with effective project management and communication and you have an effective tool for reducing the risk of overruns in budget and/or time due to out of control scope changes. Now that you’ve had a chance to read these thoughts on the use-case model and project scope, please let me know your feedback based on your experience.

    Read the article

  • Case statements in VHDL

    - by cheryl
    Hi, When programming in VHDL, can you use a variable in a case statement? This variable will modified by one of the cases i.e. case task is when 1 => when 2 => when number => is this OK?

    Read the article

  • MYSQL CASE WHEN PROBLEM

    - by user305270
    SELECT `profiles`.* FROM `profiles` INNER JOIN `friendships` ON `profiles`.id = `friendships`.(CASE WHEN friendships.profile_id = 1 THEN`friend_id` ELSE `profile_id` END) How can i make the inner join like profile.id = friendships.(here will select the one key that is needed) but it doesnt work. please help :P it cant be: `profiles`.id = (CASE WHEN friendships.profile_id = 1 THEN `friendships`.`friend_id` ELSE `friendships`.`profile_id` END)

    Read the article

  • Why do switch statements continue after case

    - by John W.
    After evaluating a case in a switch statement in Java (and I am sure other languages) the following case's are also evaluated unless a control statement like break, or return is used. I understand this is probably an implementation detail, but what is/are the reasons for having this functionality happen? Thanks!

    Read the article

  • Use hash or case-statement [Ruby]

    - by user94154
    Generally which is better to use?: case n when 'foo' result = 'bar' when 'peanut butter' result = 'jelly' when 'stack' result = 'overflow' return result or map = {'foo' => 'bar', 'peanut butter' => 'jelly', 'stack' => 'overflow'} return map[n] More specifically, when should I use case-statements and when should I simply use a hash?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >