Search Results

Search found 102 results on 5 pages for 'datafile'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• How can I measure the time it takes a file to upload to a PHP script?

  - by Gustav Bertram

  I am trying to measure the time a script takes to upload a file to a PHP script, inside the receiving script. Here's a short example: <form action="#" enctype="multipart/form-data" method="post"> Upload: <input type="file" name="datafile" size="40"> <input type="submit" value="Send"> </form> <?php $upload_time = time() - $_SERVER['REQUEST_TIME']; echo $upload_time . " seconds."; I've submitted 4MB, 25MB, 100MB and 1.4GB files. They took anything from a fraction of a second, to almost a minute, yet the script above always yielded 0 seconds. NOTE: I know that this is a duplicate question, but the accepted answer on the other question did not work for me (at least, initially): Detect how long it takes for a file to upload (PHP) I've tried it using PHP 5.3.3 with Apache 2.2.16 on Ubuntu 10.4. UPDATE: I've discovered that both the Apache header and Ajax solutions work. In fact, the solution on the duplicate question also works. The critical element to making these solutions work is to ensure that the following values in the php.ini are sufficiently high: memory_limit = 1000M upload_max_filesize = 1000M post_max_size = 1000M I am accepting the Apache header solution, since it only uses PHP.

  Read the article

• How do i enable innodb on ubuntu server 10.04

  - by Matt

  Here is my entire my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] key_buffer = 224M sort_buffer_size = 4M read_buffer_size = 4M read_rnd_buffer_size = 4M myisam_sort_buffer_size = 12M query_cache_size = 44M # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # #key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M #query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ And here is my show engines call....i have no idea what i need to do to enable innodb show engines; +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | Engine | Support | Comment | Transactions | XA | Savepoints | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ | MyISAM | DEFAULT | Default engine as of MySQL 3.23 with great performance | NO | NO | NO | | MRG_MYISAM | YES | Collection of identical MyISAM tables | NO | NO | NO | | BLACKHOLE | YES | /dev/null storage engine (anything you write to it disappears) | NO | NO | NO | | CSV | YES | CSV storage engine | NO | NO | NO | | MEMORY | YES | Hash based, stored in memory, useful for temporary tables | NO | NO | NO | | FEDERATED | NO | Federated MySQL storage engine | NULL | NULL | NULL | | ARCHIVE | YES | Archive storage engine | NO | NO | NO | +------------+---------+----------------------------------------------------------------+--------------+------+------------+ 7 rows in set (0.00 sec)

  Read the article

• mysql not starting

  - by Eiriks

  I have a server running on rackspace.com, it been running for about a year (collecting data for a project) and no problems. Now it seems mysql froze (could not connect either through ssh command line, remote app (sequel pro) or web (pages using the db just froze). I got a bit eager to fix this quick and rebooted the virtual server, running ubuntu 10.10. It is a small virtual LAMP server (10gig storage - I'm only using 1, 256mb ram -has not been a problem). Now after the reboot, I cannot get mysql to start again. service mysql status mysql stop/waiting I believe this just means mysql is not running. How do I get this running again? service mysql start start: Job failed to start No. Just typing 'mysql' gives: mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) There is a .sock file in this folder, 'ls -l' gives: srwxrwxrwx 1 mysql mysql 0 2012-12-01 17:20 mysqld.sock From googleing this for a while now, I see that many talk about the logfile and my.cnf. Logs Not sure witch ones I should look at. This log-file is empty: 'var/log/mysql/error.log', so is the 'var/log/mysql.err' and 'var/log/mysql.log'. my.cnf is located in '/etc/mysql' and looks like this. Can't see anything clearly wrong with it either. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ I need the data in the database (so i'd like to avoid reinstalling), and I need it back up running again. All hint, tips and solutions are welcomed and appreciated.

  Read the article

• Extending Database-as-a-Service to Provision Databases with Application Data

  - by Nilesh A

  Oracle Enterprise Manager 12c Database as a Service (DBaaS) empowers Self Service/SSA Users to rapidly spawn databases on demand in cloud. The configuration and structure of provisioned databases depends on respective service template selected by Self Service user while requesting for database. In EM12c, the DBaaS Self Service/SSA Administrator has the option of hosting various service templates in service catalog and based on underlying DBCA templates.Many times provisioned databases require production scale data either for UAT, testing or development purpose and managing DBCA templates with data can be unwieldy. So, we need to populate the database using post deployment script option and without any additional work for the SSA Users. The SSA Administrator can automate this task in few easy steps. For details on how to setup DBaaS Self Service Portal refer to the DBaaS CookbookIn this article, I will list steps required to enable EM 12c DBaaS to provision databases with application data in two distinct ways using: 1) Data pump 2) Transportable tablespaces (TTS). The steps listed below are just examples of how to extend EM 12c DBaaS and you can even have your own method plugged in part of post deployment script option. Using Data Pump to populate databases These are the steps to be followed to implement extending DBaaS using Data Pump methodolgy: Production DBA should run data pump export on the production database and make the dump file available to all the servers participating in the database zone [sample shown in Fig.1] -- Full exportexpdp FULL=y DUMPFILE=data_pump_dir:dpfull1%U.dmp, data_pump_dir:dpfull2%U.dmp PARALLEL=4 LOGFILE=data_pump_dir:dpexpfull.log JOB_NAME=dpexpfull Figure-1:  Full export of database using data pump Create a post deployment SQL script [sample shown in Fig. 2] and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned Normal 0 -- Full importdeclare    h1   NUMBER;begin-- Creating the directory object where source database dump is backed up.    execute immediate 'create directory DEST_LOC as''/scratch/nagrawal/OracleHomes/oradata/INITCHNG/datafile''';-- Running import    h1 := dbms_datapump.open (operation => 'IMPORT', job_mode => 'FULL', job_name => 'DB_IMPORT10');    dbms_datapump.set_parallel(handle => h1, degree => 1);    dbms_datapump.add_file(handle => h1, filename => 'IMP_GRIDDB_FULL.LOG', directory => 'DATA_PUMP_DIR', filetype => 3);    dbms_datapump.add_file(handle => h1, filename => 'EXP_GRIDDB_FULL_%U.DMP', directory => 'DEST_LOC', filetype => 1);    dbms_datapump.start_job(handle => h1);    dbms_datapump.detach(handle => h1);end;/ Figure-2: Importing using data pump pl/sql procedures Using DBCA, create a template for the production database – include all the init.ora parameters, tablespaces, datafiles & their sizes SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In “Additional Configuration Options” step of Customize “Create Database Deployment Procedure” flow, provide the name of the SQL script in the Custom Script section and lock the input (shown in Fig. 3). Continue saving the deployment procedure. Figure-3: Using Custom script option for calling Import SQL Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also  populate the data using the post deployment step. Using Transportable tablespaces to populate databases Copy of all user/application tablespaces will enable this method of populating databases. These are the required steps to extend DBaaS using transportable tablespaces: Production DBA needs to create a backup of tablespaces. Datafiles may need conversion [such as from Big Endian to Little Endian or vice versa] based on the platform of production and destination where DBaaS created the test database. Here is sample backup script shows how to find out if any conversion is required, describes the steps required to convert datafiles and backup tablespace. SSA Administrator should copy the database (tablespaces) backup datafiles and export dumps to the backup location accessible from the hosts participating in the database zone(s). Create a post deployment SQL script and this script can either be uploaded into the software library by SSA Administrator or made available on a shared location accessible from servers where databases are likely to be provisioned. Here is sample post deployment SQL script using transportable tablespaces. Using DBCA, create a template for the production database – all the init.ora parameters should be included. NOTE: DO NOT choose to bring tablespace data into this template as they will be created SSA Administrator should customize “Create Database Deployment Procedure” and provide DBCA template created in the previous step. In the “Additional Configuration Options” step of the flow, provide the name of the SQL script in the Custom Script section and lock the input. Continue saving the deployment procedure. Now, an SSA user can login to Self Service Portal and use the flow to provision a database that will also populate the data using the post deployment step. More Information: Database-as-a-Service on Exadata Cloud Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Exadata?????????INSERT?UPDATE

  - by Liu Maclean(???)

  Hybrid Columnar Compression??????Exadata?????????????,??????????(advanced compression)??,Hybrid columnar compression (HCC) ???Exadata????????HCC???????????CU(compression unit?????),??CU??????????,?????????????????????????,???CU????block??????????????? ???????INSERT/UPDATE??,??????????????,????UPDATE/INSERT???HCC?????????????????? hybrid columnar compression???????????????(bulk initial load)??,??????(direct load)??ALTER TABLE MOVE, IMPDP???????(append INSERT),??HCC??????????????????????? ???????????????????,?????????CU????????? ??????????????HCC?????????????for OLTP?????? ????????: SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 12 06:14:53 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> grant dba to scott; Grant succeeded. SQL> conn scott/oracle Connected. SQL> SQL> create table hcc_maclean tablespace users compress for query high as select * from dba_objects; Table created. 1* select rowid,owner,object_name,dbms_rowid.rowid_block_number(rowid) from hcc_maclean where owner='MACLEAN' SQL> / ROWID OWNER OBJECT_NAME DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) ------------------------------ ------------------------------ -------------------- ------------------------------------ AAAThuAAEAAAHTJAOI MACLEAN SALES 29897 AAAThuAAEAAAHTJAOJ MACLEAN MYCUSTOMERS 29897 AAAThuAAEAAAHTJAOK MACLEAN MYCUST_ARCHIVE 29897 AAAThuAAEAAAHTJAOL MACLEAN MYCUST_QUERY 29897 AAAThuAAEAAAHTJAOh MACLEAN COMPRESS_QUERY 29897 AAAThuAAEAAAHTJAOi MACLEAN UNCOMPRESS 29897 AAAThuAAEAAAHTJAOj MACLEAN CHAINED_ROWS 29897 AAAThuAAEAAAHTJAOk MACLEAN COMPRESS_QUERY1 29897 8 rows selected. select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from hcc_maclean where owner='MACLEAN'; session A: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOI'; session B: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOJ'; SQL> select sid,wait_event_text,BLOCKER_SID from v$wait_chains; SID WAIT_EVENT_TEXT BLOCKER_SID ---------- ---------------------------------------------------------------- ----------- 13 enq: TX - row lock contention 136 136 SQL*Net message from client ????session A block B,????HCC???update row??CU?????CU?????? SQL> alter system checkpoint; System altered. SQL> / System altered. SQL> alter system dump datafile 4 block 29897 2 ; Block header dump: 0x010074c9 Object id on Block? Y seg/obj: 0x1386e csc: 0x00.1cad7e itc: 3 flg: E typ: 1 - DATA brn: 0 bdba: 0x10074c8 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0xffff.000.00000000 0x00000000.0000.00 C--- 0 scn 0x0000.001cabfa 0x02 0x000a.00a.00000430 0x00c051a7.0169.17 ---- 1 fsc 0x0000.00000000 0x03 0x0000.000.00000000 0x00000000.0000.00 ---- 0 fsc 0x0000.00000000 avsp=0x14 tosp=0x14 r0_9ir2=0x0 mec_kdbh9ir2=0x0 76543210 shcf_kdbh9ir2=---------- 76543210 flag_9ir2=--R----- Archive compression: Y fcls_9ir2[0]={ } 0x16:pti[0] nrow=1 offs=0 0x1a:pri[0] offs=0x30 block_row_dump: tab 0, row 0, @0x30 tl: 8016 fb: --H-F--N lb: 0x2 cc: 1 ==>??CU??ITL 0x02 nrid: 0x010074ca.0 col 0: [8004] Compression level: 02 (Query High) Length of CU row: 8004 kdzhrh: ------PC CBLK: 1 Start Slot: 00 NUMP: 01 PNUM: 00 POFF: 7984 PRID: 0x010074ca.0 CU header: CU version: 0 CU magic number: 0x4b445a30 CU checksum: 0xf8faf86e CU total length: 8694 CU flags: NC-U-CRD-OP ncols: 15 nrows: 995 algo: 0 CU decomp length: 8487 len/value length: 100111 row pieces per row: 1 num deleted rows: 1 deleted rows: 904, START_CU: ????????????row?????: SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAAThuAAEAAAHTJAOk') from dual; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAATHUAAEAAAHTJAOK' -------------------------------------------------------------------------------- 4 COMP_NOCOMPRESS CONSTANT NUMBER := 1;COMP_FOR_OLTP CONSTANT NUMBER := 2;COMP_FOR_QUERY_HIGH CONSTANT NUMBER := 4;COMP_FOR_QUERY_LOW CONSTANT NUMBER := 8;COMP_FOR_ARCHIVE_HIGH CONSTANT NUMBER := 16;COMP_FOR_ARCHIVE_LOW CONSTANT NUMBER := 32; COMP_RATIO_MINROWS CONSTANT NUMBER := 1000000;COMP_RATIO_ALLROWS CONSTANT NUMBER := -1; ?????????????,??COMP_FOR_QUERY_HIGH?4,COMP_FOR_QUERY_LOW ?8 ?????????GET_COMPRESSION_TYPE??rowid????????4?????COMP_FOR_QUERY_HIGH????: SQL> update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where owner='MACLEAN'; 8 rows updated. SQL> commit; Commit complete. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 1 1 1 1 1 1 1 1 8 rows selected. ??????????????COMPRESSION_TYPE?COMP_FOR_QUERY_HIGH???COMP_NOCOMPRESS,????????compress for query high????????????????? ?11g????????????????????HCC??????????? ALTER TABLE MOVE???????????????????HCC??? SQL> ALTER TABLE hcc_MACLEAN move COMPRESS FOR ARCHIVE HIGH; Table altered. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 16 16 16 16 16 16 16 16 8 rows selected.

  Read the article

• PopulateOnDemand does not work on data bound ASP.Net TreeView

  - by Shay Friedman

  Hi, I have a TreeView that is bound to a XmlDataSource control. I've added some TreeNodeBinding elements to define how I want the XML data to be shown. I have also added PopulateOnDemand=true to these TreeNodeBindings. However, doing so didn't change a thing and the entire XML tree is displayed. Moreover, the TreeNodePopulate event is not fired on node expand as well. Important information: I'm using ASP.NET 4. This is an example that reproduces the problem (very straight forward): <%@ Page Language="C#" AutoEventWireup="true" %> <script type="text/C#" runat="server"> protected void TreeView1_TreeNodePopulate(Object sender, TreeNodeEventArgs e) { // This method is never called... } </script> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <asp:TreeView ID="TreeView1" runat="server" DataSourceID="XmlDataSource1" OnTreeNodePopulate="TreeView1_TreeNodePopulate" ExpandDepth="0"> <DataBindings> <asp:TreeNodeBinding DataMember="#" TextField="#" ValueField="#" PopulateOnDemand="true" /> </DataBindings> </asp:TreeView> <asp:XmlDataSource ID="XmlDataSource1" runat="server" DataFile="Sample.xml" /> </div> </form> </body> </html> The Sample.xml can be any xml file you want, it doesn't really matter. I tried to put a breakpoint within the TreeView1_TreeNodePopulate method and it was never hit. I also tried to: Set a TreeNodeBinding for each possible data member with PopulateOnDemand="true". Via code, go through all tree nodes and set their PopulateOnDemand property to true. Nothing worked. The only way the populate-on-demand thing worked was when I added nodes manually to the nodes instead of binding it to a data source. What am I doing wrong?

  Read the article

• SSIS DTS Package flat file error - "The file name specified in the connection was not valid"

  - by MisterZimbu

  I have a pretty basic SSIS package that is attempting to read a file hosted on a share, and import its contents to a database table. The package runs fine when I run it manually within SSIS. However, when I set up a SQL Agent job and attempt to execute it, I get the following error: Executed as user: DOMAIN\UserName. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:14:17 AM Error: 2010-05-03 10:14:17.75 Code: 0xC001401E Source: DataImport Connection manager "Data File Local" Description: The file name "\10.1.1.159\llpf\datafile.dat" specified in the connection was not valid. End Error Error: 2010-05-03 10:14:17.75 Code: 0xC001401D Source: DataAnimalImport Description: Connection "Data File Local" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:14:17 AM Finished: 10:14:17 AM Elapsed: 0.594 seconds. The package execution failed. The step failed. This leads me to believe it's a permissions issue, but every attempt I've made to fix it has failed. What I've tried so far: Run as the SQL Agent account (DOMAIN\SqlAgent) - yields same error. DOMAIN\SqlAgent has "Full Control" permissions on both the share and the uploaded file. Set up a proxy account with a different account's credentials (DOMAIN\Account) - yields same error. Like above, "Full Control" permissions were given over the share to that account. Gave "Everyone" full control permissions over the share (temporarily!). Yielded same error. Manually copied the file to a local path and tested with the SQL Agent account. Worked properly. Added an ActiveX script task that would first copy the remotely hosted file to a local path, and then have the DTS package reference the local file. Gave a completely nondescriptive (even by SSIS standards) error when trying to run the script. Set up a proxy account, using my own personal account's credentials - worked correctly. However, this is not an acceptable solution as there are password policies in place on my account, as well as being a bad practice to set things up this way in general. Any ideas? I'm still convinced it's a permissions issue. However, what I've read from various searches more or less says giving the executing account permissions on the share should work. However, this is not the case here (unless I'm missing something obscure when I'm setting up permissions on the share).

  Read the article

• Understanding VS2010 C# parallel profiling results

  - by Haggai

  I have a program with many independent computations so I decided to parallelize it. I use Parallel.For/Each. The results were okay for a dual-core machine - CPU utilization of about 80%-90% most of the time. However, with a dual Xeon machine (i.e. 8 cores) I get only about 30%-40% CPU utilization, although the program spends quite a lot of time (sometimes more than 10 seconds) on the parallel sections, and I see it employs about 20-30 more threads in those sections compared to serial sections. Each thread takes more than 1 second to complete, so I see no reason for them to work in parallel - unless there is a synchronization problem. I used the built-in profiler of VS2010, and the results are strange. Even though I use locks only in one place, the profiler reports that about 85% of the program's time is spent on synchronization (also 5-7% sleep, 5-7% execution, under 1% IO). The locked code is only a cache (a dictionary) get/add: bool esn_found; lock (lock_load_esn) esn_found = cache.TryGetValue(st, out esn); if(!esn_found) { esn = pData.esa_inv_idx.esa[term_idx]; esn.populate(pData.esa_inv_idx.datafile); lock (lock_load_esn) { if (!cache.ContainsKey(st)) cache.Add(st, esn); } } lock_load_esn is a static member of the class of type Object. esn.populate reads from a file using a separate StreamReader for each thread. However, when I press the Synchronization button to see what causes the most delay, I see that the profiler reports lines which are function entrance lines, and doesn't report the locked sections themselves. It doesn't even report the function that contains the above code (reminder - the only lock in the program) as part of the blocking profile with noise level 2%. With noise level at 0% it reports all the functions of the program, which I don't understand why they count as blocking synchronizations. So my question is - what is going on here? How can it be that 85% of the time is spent on synchronization? How do I find out what really is the problem with the parallel sections of my program? Thanks.

  Read the article

• 'Good' programming form in maintaining / updating / accessing files by entry

  - by zhermes

  Basic Question: If I'm storying/modifying data, should I access elements of a file by index hard-coded index, i.e. targetFile.getElement(5); via a hardcoded identifier (internally translated into index), i.e. target.getElementWithID("Desired Element"), or with some intermediate DESIRED_ELEMENT = 5; ... target.getElement(DESIRED_ELEMENT), etc. Background: My program (c++) stores data in lots of different 'dataFile's. I also keep a list of all of the data-files in another file---a 'listFile'---which also stores some of each one's properties (see below, but i.e. what it's name is, how many lines of information it has etc.). There is an object which manages the data files and the list file, call it a 'fileKeeper'. The entries of a listFile look something like: filename , contents name , number of lines , some more numbers ... Its definitely possible that I may add / remove fields from this list --- but in general, they'll stay static. Right now, I have a constant string array which holds the identification of each element in each entry, something like: const string fileKeeper::idKeys[] = { "FileName" , "Contents" , "NumLines" ... }; const int fileKeeper::idKeysNum = 6; // 6 - for example I'm trying to manage this stuff in 'good' programatic form. Thus, when I want to retrieve the number of lines in a file (for example), instead of having a method which just retrieves the '3'rd element... Instead I do something like: string desiredID = "NumLines"; int desiredIndex = indexForID(desiredID); string desiredElement = elementForIndex(desiredIndex); where the function indexForID() goes through the entries of idKeys until it finds desiredID then returns the index it corresponds to. And elementForIndex(index) actually goes into the listFile to retrieve the index'th element of the comma-delimited string. Problem: This still seems pretty ugly / poor-form. Is there a way I should be doing this? If not, what are some general ways in which this is usually done? Thanks!

  Read the article

• ERROR 2003 (HY000): Can't connect to MySQL server on (111)

  - by JohnMerlino

  I am unable to connect to on my ubuntu installation a remote tcp/ip which contains a mysql installation: viggy@ubuntu:~$ mysql -u user.name -p -h xxx.xxx.xxx.xxx -P 3306 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (111) I commented out the line below using vim in /etc/mysql/my.cnf: # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 Then I restarted the server: sudo service mysql restart But still I get the same error. This is the content of my.cnf: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ (Note that I can log into my local mysql install just fine by running mysql (and it will log me in as root) and also note that I can get into mysql in the remote server by logging into via ssh and then invoking mysql), but I am unable to connect to the remote server via my terminal using the host, and I need to do it that way so that I can then use mysql workbench.

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• How do I get my ubuntu server to listen for database connections?

  - by Bob Flemming

  I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• Spacewalk 2.0 provided to manage Oracle Linux systems

  - by wcoekaer

  Oracle Linux customers have a few options to manage and provision their servers. We provide a license to use Oracle Enterprise Manager's Linux OS management, monitoring and provisioning features without additional cost for every server that has an Oracle Linux support subscription. So there is no additional pack to license and no additional per server cost, it's all included in our Basic, Premier and Systems support subscriptions. The nice thing with Oracle Enterprise Manager is that you end up with a single management product that can manage all aspects of your software stack. You have complete insight into the applications running, you have roles and responsibilities, you have third party connectors for storage or other products and it makes it very easy and convenient to correlate data and events when something happens. If you use Oracle VM as well, you end up with a complete cloud portal with selfservice, chargeback, etc... Another, much simpler option, is just using yum. It is very easy to take a server and create directories and expose these through apache as repositories. You can have a simple yum config on each server pointing to a few specific repositories. It requires some manual effort in terms of creating directories, downloading packages and creating local repo files but it's easy to do and for many people a preferred solution. There are also a good number of customers that just connect their servers directly to ULN or to our free update server public-yum. Just to re-iterate, our public-yum servers have all the errata and updates available for free. Now we added another option. Many of our customers have switched from a competing Linux vendor and they had familiarity with their management tools. Switching to Oracle for support is very easy since we don't require changes to the installed servers but we also want to make sure there is a very easy and almost transparent switch for the management tools as well. While Oracle Enterprise Manager is our preferred way of managing systems, we now are offering Spacewalk 2.0 to our customers. The community project can be found here. We have made a few changes to ensure easy and complete support for Oracle Linux, tested it with public-yum, etc.. You can find the rpms in our public-yum repos at http://public-yum.oracle.com/repo/OracleLinux/OL6/. There are repositories for spacewalk server and then for each version (OL5,OL6) and architecture (x86 and x86-64) we have the client repositories as well. Spacewalk itself is only made available for OL6 x86-64. Documentation can be found here. I set it up myself and here are some quick steps on how you can get going in just a matter of minutes: Spacewalk Server Installation : 1) Installing an Oracle Database Use an existing Oracle Database or install a new Oracle Database (Standard or Enterprise Edition) [at this time use 11g, we will add support for 12c in the near future]. This database can be installed on the spacewalk server or on a separate remote server. While Oracle XE might work to create a small sample POC, we do not support the use of Oracle XE, spacewalk repositories can become large and create a significant database workload. Customers can use their existing database licenses, they can download the database with a trial licence from http://edelivery.oracle.com or Oracle Linux subscribers (customers) will be allowed to use the Oracle Database as a spacewalk repository as part of their Oracle Linux subscription at no additional cost. |NOTE : spacewalk requires the database to be configured with the UTF8 characterset. |Installation will fail if your database does not use UTF8. |To verify if your database is configured correctly, run the following command in sqlplus: | |select value from nls_database_parameters where parameter='NLS_CHARACTERSET'; |This should return 'AL32UTF8' 2) Configure the database schema for spacewalk Ideally, create a tablespace in the database to hold the spacewalk schema tables/data; create tablespace spacewalk datafile '/u01/app/oracle/oradata/orcl/spacewalk.dbf' size 10G autoextend on; Create the database user spacewalk (or use some other schema name) in sqlplus. example : create user spacewalk identified by spacewalk; grant connect, resource to spacewalk; grant create table, create trigger, create synonym, create view, alter session to spacewalk; grant unlimited tablespace to spacewalk; alter user spacewalk default tablespace spacewalk; 4) Spacewalk installation and configuration Spacewalk server requires an Oracle Linux 6 x86-64 system. Clients can be Oracle Linux 5 or 6, both 32- and 64bit. The server is only supported on OL6/64bit. The easiest way to get started is to do a 'Minimal' install of Oracle Linux on a server and configure the yum repository to include the spacewalk repo from public-yum. Once you have a system with a minimal install, modify your yum repo to include the spacewalk repo. Example : edit /etc/yum.repos.d/public-yum-ol.repo and add the following lines at the end of the file : [spacewalk] name=spacewalk baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/spacewalk20/server/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 Install the following pre-requisite packages on your spacewalk server : oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64 oracle-instantclient11.2-sqlplus-11.2.0.3.0-1.x86_64 rpm -ivh oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64 rpm -ivh oracle-instantclient11.2-sqlplus-11.2.0.3.0-1.x86_64 The above RPMs can be found on the Oracle Technology Network website : http://www.oracle.com/technetwork/topics/linuxx86-64soft-092277.html As the root user, configure the library path to include the Oracle Instant Client libraries : cd /etc/ld.so.conf.d echo /usr/lib/oracle/11.2/client64/lib oracle-instantclient11.2.conf ldconfig Install spacewalk : # yum install spacewalk-oracle The above yum command should download and install all required packages to run spacewalk on your local server. | NOTE : if you did a full, desktop or workstation installation, | you have to remove the JTA package | BEFORE installing spacewalk-oracle (rpm -e --nodeps jta) Once the installation completes, simply run the spacewalk configuration tool and you are all set. (make sure to run the command with the 2 arguments) spacewalk-setup --disconnected --external-db Answer the questions during the setup, ensure you provide the current database user (example : spacewalk) and password (example : spacewalk) and database server hostname (the standard hostname of the server on which you have deployed the Oracle database) At the end of the setup script, your spacewalk server should be fully configured and you can log into the web portal. Use your favorite browser to connect to the website : http://[spacewalkserverhostname] The very first action will be to create the main admin account.

  Read the article

• ???Flashback Log???????Redo Log?

  - by Liu Maclean(???)

  ????????????????????redo log?   RVWR( Recovery Writer)?3s??flashback generate buffer??block before image?????????? ?????block change???RVWR??block before image ?flashback log? ?????????,Oracle???????????before image????????,????????flashback database logs?????   ???????????,????? ??????????????????,???????????before image?????shared pool??flashback log buffer?,RVWR??????flashback log buffer??????????? ?DBWR???????????????,DBWR?????buffer header??FBA(Flashback Byte Address)?flashback log buffer?????????? ???? ?????? ??? ????????????? , RVWR???????????(flashback markers)?flashback database logs?? ????(flashback markers)?????????????Oracle??flashback ??????????  ??????????, Oracle ??????(flashback markers)????????????flashback database log???????????block image; ??Oracle ???????(forward recovery)?????????????????SCN?????? flashback markers for example: **** Record at fba: (lno 1 thr 1 seq 1 bno 4 bof 8184) **** RECORD HEADER: Type: 3 (Skip) Size: 8132 RECORD DATA (Skip): **** Record at fba: (lno 1 thr 1 seq 1 bno 4 bof 52) **** RECORD HEADER: Type: 7 (Begin Crash Recovery Record) Size: 36 RECORD DATA (Begin Crash Recovery Record): Previous logical record fba: (lno 1 thr 1 seq 1 bno 3 bof 316) Record scn: 0x0000.00000000 [0.0] **** Record at fba: (lno 1 thr 1 seq 1 bno 3 bof 8184) **** RECORD HEADER: Type: 3 (Skip) Size: 7868 RECORD DATA (Skip): **** Record at fba: (lno 1 thr 1 seq 1 bno 3 bof 316) **** RECORD HEADER: Type: 2 (Marker) Size: 300 RECORD DATA (Marker): Previous logical record fba: (lno 0 thr 0 seq 0 bno 0 bof 0) Record scn: 0x0000.00000000 [0.0] Marker scn: 0x0000.0060e024 [0.6348836] 06/13/2012 15:56:35 Flag 0x0 Flashback threads: 1, Enabled redo threads 1 Recovery Start Checkpoint: scn: 0x0000.0060e024 [0.6348836] 06/13/2012 15:56:12 thread:1 rba:(0x80.180.10) Flashback thread Markers: Thread:1 status:0 fba: (lno 1 thr 1 seq 1 bno 2 bof 8184) Redo Thread Checkpoint Info: Thread:1 rba:(0x80.180.10) **** Record at fba: (lno 1 thr 1 seq 1 bno 2 bof 8184) **** RECORD HEADER: Type: 3 (Skip) Size: 8168 RECORD DATA (Skip): End-Of-Thread reached ????????????????block change ????before image????????flashback log?? ?????block change???flashback log record ????????? redo log???!????flashback log ???????before image ? redo log??? change vector ?  Oracle?????????????????????????????????????,??????I/O??????????????: ??hot block??,Oracle???????????block image?????; Oracle ?????????(flashback barriers)???????????????,flashback barriers???????(???15??),??????????(flashback barriers)????(flashback markers)????????? ????, ??????change?????, ???????????????????????????, ?15????????????????????flashback log????????before image?????????????,?????????????????????,?????????????? ????????,??????????????(flashback barriers), flashback barriers???????,?????15????? ?????flashback barriers????????(flashback markers)???????????????,???????????????????(????barriers?????)??????block image ,????????????????????????????????? ??????????flashback log????redo log????! ????,????????????????, ?????????? SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create table flash_maclean (t1 varchar2(200)) tablespace users; Table created. SQL> insert into flash_maclean values('MACLEAN LOVE HANNA'); 1 row created. SQL> commit; Commit complete. SQL> startup force; ORACLE instance started. Total System Global Area 939495424 bytes Fixed Size 2233960 bytes Variable Size 713034136 bytes Database Buffers 218103808 bytes Redo Buffers 6123520 bytes Database mounted. Database opened. SQL> update flash_maclean set t1='HANNA LOVE MACLEAN'; 1 row updated. commit; Commit complete. SQL> alter system checkpoint; System altered. SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from flash_maclean; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------ 140431 4 datafile 4 block 140431 ??RDBA rdba: 0x0102248f (4/140431) SQL> ! ps -ef|grep rvwr|grep -v grep oracle 26695 1 0 15:56 ? 00:00:00 ora_rvwr_G11R23 SQL> oradebug setospid 26695 Oracle pid: 20, Unix process pid: 26695, image: [email protected] (RVWR) SQL> ORADEBUG DUMP FBTAIL 1; Statement processed. To dump the last 2000 flashback records , ??ORADEBUG DUMP FBTAIL 1????????2000?????? SQL> oradebug tracefile_name /s01/orabase/diag/rdbms/g11r23/G11R23/trace/G11R23_rvwr_26695.trc ? TRACE?????????block? before image **** Record at fba: (lno 1 thr 1 seq 1 bno 55 bof 2564) **** RECORD HEADER: Type: 1 (Block Image) Size: 28 RECORD DATA (Block Image): file#: 4 rdba: 0x0102248f Next scn: 0x0000.00000000 [0.0] Flag: 0x0 Block Size: 8192 BLOCK IMAGE: buffer rdba: 0x0102248f scn: 0x0000.00609044 seq: 0x01 flg: 0x06 tail: 0x90440601 frmt: 0x02 chkval: 0xc626 type: 0x06=trans data Hex dump of block: st=0, typ_found=1 Dump of memory from 0x00002B1D94183C00 to 0x00002B1D94185C00 2B1D94183C00 0000A206 0102248F 00609044 06010000 [.....$..D.`.....] 2B1D94183C10 0000C626 00000001 00014AD4 0060903A [&........J..:.`.] 2B1D94183C20 00000000 00320002 01022488 00090006 [......2..$......] 2B1D94183C30 00000CC8 00C00340 000D0542 00008000 [[email protected].......] 2B1D94183C40 006040BC 000F000A 00000920 00C002E4 [.@`..... .......] 2B1D94183C50 0017048F 00002001 00609044 00000000 [..... ..D.`.....] 2B1D94183C60 00000000 00010100 0014FFFF 1F6E1F77 [............w.n.] 2B1D94183C70 00001F6E 1F770001 00000000 00000000 [n.....w.........] 2B1D94183C80 00000000 00000000 00000000 00000000 [................] Repeat 500 times 2B1D94185BD0 00000000 00000000 2C000000 4D120102 [...........,...M] 2B1D94185BE0 454C4341 4C204E41 2045564F 4E4E4148 [ACLEAN LOVE HANN] 2B1D94185BF0 01002C41 43414D07 4E41454C 90440601 [A,...MACLEAN..D.] Block header dump: 0x0102248f Object id on Block? Y seg/obj: 0x14ad4 csc: 0x00.60903a itc: 2 flg: E typ: 1 - DATA brn: 0 bdba: 0x1022488 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0x0006.009.00000cc8 0x00c00340.0542.0d C--- 0 scn 0x0000.006040bc 0x02 0x000a.00f.00000920 0x00c002e4.048f.17 --U- 1 fsc 0x0000.00609044 bdba: 0x0102248f data_block_dump,data header at 0x2b1d94183c64 =============== tsiz: 0x1f98 hsiz: 0x14 pbl: 0x2b1d94183c64 76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f77 avsp=0x1f6e tosp=0x1f6e 0xe:pti[0] nrow=1 offs=0 0x12:pri[0] offs=0x1f77 block_row_dump: tab 0, row 0, @0x1f77 tl: 22 fb: --H-FL-- lb: 0x2 cc: 1 col 0: [18] 4d 41 43 4c 45 41 4e 20 4c 4f 56 45 20 48 41 4e 4e 41 end_of_block_dump SQL> select dump('MACLEAN LOVE HANNA',16) from dual; DUMP('MACLEANLOVEHANNA',16) -------------------------------------------------------------------- Typ=96 Len=18: 4d,41,43,4c,45,41,4e,20,4c,4f,56,45,20,48,41,4e,4e,41 ???????????????????????,??flashback log??before image????????? create table flash_maclean1 (t1 int) tablespace users; SQL> select vs.name, ms.value 2 from v$mystat ms, v$sysstat vs 3 where vs.statistic# = ms.statistic# 4 and vs.name in ('redo size','db block changes'); NAME VALUE ---------------------------------------------------------------- ---------- db block changes 0 redo size 0 SQL> select name,value from v$sysstat where name like 'flashback log%'; NAME VALUE ---------------------------------------------------------------- ---------- flashback log writes 49 flashback log write bytes 9306112 SQL> begin 2 for i in 1..5000 loop 3 update flash_maclean1 set t1=t1+1; 4 commit; 5 end loop; 6 end; 7 / PL/SQL procedure successfully completed. SQL> select vs.name, ms.value 2 from v$mystat ms, v$sysstat vs 3 where vs.statistic# = ms.statistic# 4 and vs.name in ('redo size','db block changes'); NAME VALUE ---------------------------------------------------------------- ---------- db block changes 20006 redo size 3071288 SQL> select name,value from v$sysstat where name like 'flashback log%'; NAME VALUE ---------------------------------------------------------------- ---------- flashback log writes 52 flashback log write bytes 10338304 ??????????? ??hot block,???20006 ?block changes???? ??? 3000k ?redo log ? ??1000k? flashback log ?

  Read the article

• MySQL 5.1.49 freezing every two days

  - by maximus

  Hi all, our mysql system is "freezing" every two days. By "freezing" i mean the following: it doesn't respond to ping we can't login with SSH we don't get any answer from MySQL there is no entry in the error logs! neither from linux neither from MySQL. we have already changed to a completely new hardware, we have the same problem, so it's definitely not a hardware problem. we do not have any other software installed except a firewall (iptables rule) we can restart the server from another server using rsyslog (www.rsyslog.com)(software reset) Could someone help me, by giving me some pointers what could i do to figure out the problem? I have included every detail about our settings. Thank you in advance for your help. Max. Our system parameters and settings: System-Memory: 12GB Processor: Intel 7-920 Quadcore Operating system: Debian 5 (lenny) 64bit MySQL 5.1.49 Databases: (a) a small phpbb forum (b) a 6GB database 3 tables with about 15 million rows my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = our-ip-address # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 256K thread_cache_size = 32 max_connections = 300 table_cache = 2048 #thread_concurrency = 4 # Used for InnoDB tables recommended to 50%-80% available memory innodb_buffer_pool_size = 6G # 20MB sometimes larger innodb_additional_mem_pool_size = 20M # 8M-16M is good for most situations innodb_log_buffer_size = 8M # Disable XA support because we do not use it innodb-support-xa = 0 # 1 is default wich is 100% secure but 2 offers better performance innodb_flush_log_at_trx_commit = 1 innodb_flush_method = O_DIRECT #innodb_thread_concurency = 8 # Recommended 64M - 512M depending on server size innodb_log_file_size = 512M # One file per table innodb_file_per_table # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M #query_cache_type = 1 #query_cache_min_res_unit= 2K #join_buffer_size = 1M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. #server-id = 1 log_bin = /var/log/mysql/mysql-bin.log # WARNING: Using expire_logs_days without bin_log crashes the server! See README.Debian! expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # * InnoDB plugin # As of MySQL 5.1.38, the InnoDB plugin from Oracle is included in the MySQL source code. # It has many improvements and better performances than the built-in InnoDB storage engine. # Please read http://www.innodb.com/products/innodb_plugin/ for more information. # Uncommenting the two following lines to use the InnoDB plugin. ignore_builtin_innodb plugin-load=innodb=ha_innodb_plugin.so # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # !includedir /etc/mysql/conf.d/ UPDATE After installing sysstat and configuring it to collect data after every minute i have the following datas. I used sar to generate the following output: The log-file is too big so coudn't enter it here but uploaded to box.net. The link is http://www.box.net/shared/xc6rh7qqob SECOND UPDATE We started a ping command in the background, and that solved the problem. Now the server does work since more then a week. We still don't know what's the problem.

  Read the article

• Optimizing MySQL for small VPS

  - by Chris M

  I'm trying to optimize my MySQL config for a verrry small VPS. The VPS is also running NGINX/PHP-FPM and Magento; all with a limit of 250MB of RAM. This is an output of MySQL Tuner... -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.41-3ubuntu12.8 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 1M (Tables: 14) [--] Data in InnoDB tables: 29M (Tables: 301) [--] Data in MEMORY tables: 1M (Tables: 17) [!!] Total fragmented tables: 301 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 2d 11h 14m 58s (1M q [8.038 qps], 33K conn, TX: 2B, RX: 618M) [--] Reads / Writes: 83% / 17% [--] Total buffers: 122.0M global + 8.6M per thread (100 max threads) [!!] Maximum possible memory usage: 978.2M (404% of installed RAM) [OK] Slow queries: 0% (37/1M) [OK] Highest usage of available connections: 6% (6/100) [OK] Key buffer size / total MyISAM indexes: 32.0M/282.0K [OK] Key buffer hit rate: 99.7% (358K cached / 1K reads) [OK] Query cache efficiency: 83.4% (1M cached / 1M selects) [!!] Query cache prunes per day: 48301 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 144K sorts) [OK] Temporary tables created on disk: 13% (27K on disk / 203K total) [OK] Thread cache hit rate: 99% (6 created / 33K connections) [!!] Table cache hit rate: 0% (32 open / 51K opened) [OK] Open file limit used: 1% (20/1K) [OK] Table locks acquired immediately: 99% (1M immediate / 1M locks) [!!] InnoDB data size / buffer pool: 29.2M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increase table_cache gradually to avoid file descriptor limits Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 64M) table_cache (> 32) innodb_buffer_pool_size (>= 29M) and this is the config. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 32M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 sort_buffer_size = 4M read_buffer_size = 4M myisam_sort_buffer_size = 16M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 100 table_cache = 32 tmp_table_size = 128M #thread_concurrency = 10 # # * Query Cache Configuration # #query_cache_limit = 1M query_cache_type = 1 query_cache_size = 64M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ The site contains 1 wordpress site,so lots of MYISAM but mostly static content as its not changing all that often (A wordpress cache plugin deals with this). And the Magento Site which consists of a lot of InnoDB tables, some MyISAM and some INMEMORY. The "read" side seems to be running pretty well with a mass of optimizations I've used on Magento, the NGINX setup and PHP-FPM + XCACHE. I'd love to have a kick in the right direction with the MySQL config so I'm not blindly altering it based on the MySQLTuner without understanding what I'm changing. Thanks

  Read the article

• ASP.NET XML as Datasource error

  - by nekko

  Hello I am trying to use an XML as a datasource in ASP and then display it as a datagrid. The XML has the following format: <?xml version="1.0" encoding="UTF-8"?> <people type="array"> <person> <id type="integer"></id> <first_name></first_name> <last_name></last_name> <title></title> <company></company> <tags> </tags> <locations> <location primary="false" label="work"> <email></email> <website></website> <phone></phone> <cell></cell> <fax></fax> <street_1/> <street_2/> <city/> <state/> <postal_code/> <country/> </location> </locations> <notes></notes> <created_at></created_at> <updated_at></updated_at> </person> </people> When I try to run the simple page I receive the following error Server Error in '/' Application. The data source for GridView with id 'GridView1' did not have any properties or attributes from which to generate columns. Ensure that your data source has content. Here is my page code <%@ Page Language="vb" AutoEventWireup="false" CodeBehind="Default.aspx.vb" Inherits="shout._Default" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head runat="server"> <title>Untitled Page</title> </head> <body> <form id="form1" runat="server"> <div> <asp:XmlDataSource ID="XmlDataSource1" runat="server" DataFile="~/App_Data/people.xml" XPath="people/person"></asp:XmlDataSource> <asp:GridView ID="GridView1" runat="server" AllowPaging="True" DataSourceID="XmlDataSource1"> </asp:GridView> </div> </form> </body> </html> Please help. Thanks in advance.

  Read the article

• Lots of mysql Sleep processes

  - by user259284

  Hello, I am still having trouble with my mysql server. It seems that since i optimize it, the tables were growing and now sometimes is very slow again. I have no idea of how to optimize more. mySQL server has 48GB of RAM and mysqld is using about 8, most of the tables are innoDB. Site has about 2000 users online. I also run explain on every query and every one of them is indexed. mySQL processes: http://www.pik.ba/mysqlStanje.php my.cnf: # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 10.100.27.30 # # * Fine Tuning # key_buffer = 64M key_buffer_size = 512M max_allowed_packet = 16M thread_stack = 128K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 1000 table_cache = 1000 join_buffer_size = 2M tmp_table_size = 2G max_heap_table_size = 2G innodb_buffer_pool_size = 3G innodb_additional_mem_pool_size = 128M innodb_log_file_size = 100M log-slow-queries = /var/log/mysql/slow.log sort_buffer_size = 5M net_buffer_length = 5M read_buffer_size = 2M read_rnd_buffer_size = 12M thread_concurrency = 10 ft_min_word_len = 3 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 512M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• How to use value from primary accessdatasource control as parameter in select query for secondary ac

  - by weedave

  Hi, I'm trying to display all orders placed and I have a primary accessdatasource control that has a select query to get the customer information and the orderID. I want to use the orderID value from this first query as a parameter for the secondary accessdatasource control that selects the product information of the products in the order. In plain english, I want to:- select product info from product table where orderID = ? (where ? is the orderID value from the first query) I have tried the <%#Eval("OrderID")% but I get a "server tag not well formed" error, but I do get results returned when I just type the order ID in, but obviously every result (order) just contains the same product info... <asp:Repeater ID="Repeater1" runat="server" DataSourceID="AccessDataSource1"> <ItemTemplate> <asp:AccessDataSource ID="AccessDataSource2" runat="server" DataFile="~/App_Data/project.mdb" SelectCommand="SELECT orderDetails.OrderID, album.Artist, album.Album, album.Cost, album.ImageURL, orderDetails.Quantity, orderDetails.Total FROM (album INNER JOIN orderDetails ON album.AlbumID = orderDetails.AlbumID) WHERE (orderDetails.OrderID = ? )"> <SelectParameters> // Error is on this line <asp:Parameter Name="OrderID" DefaultValue="<%#Eval ("OrderID")%>" /> </SelectParameters> </asp:AccessDataSource> <div class="viewAllOrdersOrderArea"> <div class="viewAllOrdersOrderSummary"> <p><b>Order ID: </b><%#Eval("OrderID")%></p> <h4>Shipping Details</h4> <p><b>Shipping Address: </b><%#Eval("ShippingName")%>, <%#Eval("ShippingAddress")%>, <%#Eval("ShippingTown")%>, <%#Eval("ShippingPostcode")%></p> <h4>Payment Details</h4> <p><b>Cardholder's Address: </b><%#Eval("CardHolder")%>, <%#Eval("BillingAddress")%>, <%#Eval("BillingTown")%>, <%#Eval("BillingPostcode")%></p> <p><b>Payment Method: </b><%#Eval("CardType")%></p> <p><b>Card Number: </b><%#Eval("CardNumber")%></p> <p><b>Start Date: </b><%#Eval("StartDate")%>, Expiry Date: <%#Eval("ExpiryDate")%></p> <p><b>Security Digits: </b><%#Eval("SecurityDigits")%></p> <h4>Ordered items:</h4> <asp:Repeater ID="Repeater2" runat="server" DataSourceID="AccessDataSource2"> <ItemTemplate> <div style="display: block; float: left;"> <div class="viewAllOrdersProductImage"> <img width="70px" height="70px" alt="<%# Eval("Artist") %> - <%# Eval("Album") %>" src="assets/images/thumbs/<%# Eval("ImageURL") %>" /> </div> <div style="display:block; float:left; padding-top:15px; padding-right:20px;"><p><b><%# Eval("Artist") %> - <%# Eval("Album") %></b></p> <p>£<%# Eval("Cost") %> x <%# Eval("Quantity") %> = £<%#Eval("Total")%></p></div> </div> </ItemTemplate> </asp:Repeater> </div> </div> </ItemTemplate> </asp:Repeater>

  Read the article

• Investigation: Can different combinations of components effect Dataflow performance?

  - by jamiet

  Introduction The Dataflow task is one of the core components (if not the core component) of SQL Server Integration Services (SSIS) and often the most misunderstood. This is not surprising, its an incredibly complicated beast and we’re abstracted away from that complexity via some boxes that go yellow red or green and that have some lines drawn between them. Example dataflow In this blog post I intend to look under that facade and get into some of the nuts and bolts of the Dataflow Task by investigating how the decisions we make when building our packages can affect performance. I will do this by comparing the performance of three dataflows that all have the same input, all produce the same output, but which all operate slightly differently by way of having different transformation components. I also want to use this blog post to challenge a common held opinion that I see perpetuated over and over again on the SSIS forum. That is, that people assume adding components to a dataflow will be detrimental to overall performance. Its not surprising that people think this –it is intuitive to think that more components means more work- however this is not a view that I share. I have always been of the opinion that there are many factors affecting dataflow duration and the number of components is actually one of the less important ones; having said that I have never proven that assertion and that is one reason for this investigation. I have actually seen evidence that some people think dataflow duration is simply a function of number of rows and number of components. I’ll happily call that one out as a myth even without any investigation!  The Setup I have a 2GB datafile which is a list of 4731904 (~4.7million) customer records with various attributes against them and it contains 2 columns that I am going to use for categorisation: [YearlyIncome] [BirthDate] The data file is a SSIS raw format file which I chose to use because it is the quickest way of getting data into a dataflow and given that I am testing the transformations, not the source or destination adapters, I want to minimise external influences as much as possible. In the test I will split the customers according to month of birth (12 of those) and whether or not their yearly income is above or below 50000 (2 of those); in other words I will be splitting them into 24 discrete categories and in order to do it I shall be using different combinations of SSIS’ Conditional Split and Derived Column transformation components. The 24 datapaths that occur will each input to a rowcount component, again because this is the least resource intensive means of terminating a datapath. The test is being carried out on a Dell XPS Studio laptop with a quad core (8 logical Procs) Intel Core i7 at 1.73GHz and Samsung SSD hard drive. Its running SQL Server 2008 R2 on Windows 7. The Variables Here are the three combinations of components that I am going to test:     One Conditional Split - A single Conditional Split component CSPL Split by Month of Birth and income category that will use expressions on [YearlyIncome] & [BirthDate] to send each row to one of 24 outputs. This next screenshot displays the expression logic in use: Derived Column & Conditional Split - A Derived Column component DER Income Category that adds a new column [IncomeCategory] which will contain one of two possible text values {“LessThan50000”,”GreaterThan50000”} and uses [YearlyIncome] to determine which value each row should get. A Conditional Split component CSPL Split by Month of Birth and Income Category then uses that new column in conjunction with [BirthDate] to determine which of the same 24 outputs to send each row to. Put more simply, I am separating the Conditional Split of #1 into a Derived Column and a Conditional Split. The next screenshots display the expression logic in use: DER Income Category         CSPL Split by Month of Birth and Income Category       Three Conditional Splits - A Conditional Split component that produces two outputs based on [YearlyIncome], one for each Income Category. Each of those outputs will go to a further Conditional Split that splits the input into 12 outputs, one for each month of birth (identical logic in each). In this case then I am separating the single Conditional Split of #1 into three Conditional Split components. The next screenshots display the expression logic in use: CSPL Split by Income Category         CSPL Split by Month of Birth 1& 2       Each of these combinations will provide an input to one of the 24 rowcount components, just the same as before. For illustration here is a screenshot of the dataflow containing three Conditional Split components: As you can these dataflows have a fair bit of work to do and remember that they’re doing that work for 4.7million rows. I will execute each dataflow 10 times and use the average for comparison. I foresee three possible outcomes: The dataflow containing just one Conditional Split (i.e. #1) will be quicker There is no significant difference between any of them One of the two dataflows containing multiple transformation components will be quicker Regardless of which of those outcomes come to pass we will have learnt something and that makes this an interesting test to carry out. Note that I will be executing the dataflows using dtexec.exe rather than hitting F5 within BIDS. The Results and Analysis The table below shows all of the executions, 10 for each dataflow. It also shows the average for each along with a standard deviation. All durations are in seconds. I’m pasting a screenshot because I frankly can’t be bothered with the faffing about needed to make a presentable HTML table. It is plain to see from the average that the dataflow containing three conditional splits is significantly faster, the other two taking 43% and 52% longer respectively. This seems strange though, right? Why does the dataflow containing the most components outperform the other two by such a big margin? The answer is actually quite logical when you put some thought into it and I’ll explain that below. Before progressing, a side note. The standard deviation for the “Three Conditional Splits” dataflow is orders of magnitude smaller – indicating that performance for this dataflow can be predicted with much greater confidence too. The Explanation I refer you to the screenshot above that shows how CSPL Split by Month of Birth and salary category in the first dataflow is setup. Observe that there is a case for each combination of Month Of Date and Income Category – 24 in total. These expressions get evaluated in the order that they appear and hence if we assume that Month of Date and Income Category are uniformly distributed in the dataset we can deduce that the expected number of expression evaluations for each row is 12.5 i.e. 1 (the minimum) + 24 (the maximum) divided by 2 = 12.5. Now take a look at the screenshots for the second dataflow. We are doing one expression evaluation in DER Income Category and we have the same 24 cases in CSPL Split by Month of Birth and Income Category as we had before, only the expression differs slightly. In this case then we have 1 + 12.5 = 13.5 expected evaluations for each row – that would account for the slightly longer average execution time for this dataflow. Now onto the third dataflow, the quick one. CSPL Split by Income Category does a maximum of 2 expression evaluations thus the expected number of evaluations per row is 1.5. CSPL Split by Month of Birth 1 & CSPL Split by Month of Birth 2 both have less work to do than the previous Conditional Split components because they only have 12 cases to test for thus the expected number of expression evaluations is 6.5 There are two of them so total expected number of expression evaluations for this dataflow is 6.5 + 6.5 + 1.5 = 14.5. 14.5 is still more than 12.5 & 13.5 though so why is the third dataflow so much quicker? Simple, the conditional expressions in the first two dataflows have two boolean predicates to evaluate – one for Income Category and one for Month of Birth; the expressions in the Conditional Split in the third dataflow however only have one predicate thus they are doing a lot less work. To sum up, the difference in execution times can be attributed to the difference between: MONTH(BirthDate) == 1 && YearlyIncome <= 50000 and MONTH(BirthDate) == 1 In the first two dataflows YearlyIncome <= 50000 gets evaluated an average of 12.5 times for every row whereas in the third dataflow it is evaluated once and once only. Multiply those 11.5 extra operations by 4.7million rows and you get a significant amount of extra CPU cycles – that’s where our duration difference comes from. The Wrap-up The obvious point here is that adding new components to a dataflow isn’t necessarily going to make it go any slower, moreover you may be able to achieve significant improvements by splitting logic over multiple components rather than one. Performance tuning is all about reducing the amount of work that needs to be done and that doesn’t necessarily mean use less components, indeed sometimes you may be able to reduce workload in ways that aren’t immediately obvious as I think I have proven here. Of course there are many variables in play here and your mileage will most definitely vary. I encourage you to download the package and see if you get similar results – let me know in the comments. The package contains all three dataflows plus a fourth dataflow that will create the 2GB raw file for you (you will also need the [AdventureWorksDW2008] sample database from which to source the data); simply disable all dataflows except the one you want to test before executing the package and remember, execute using dtexec, not within BIDS. If you want to explore dataflow performance tuning in more detail then here are some links you might want to check out: Inequality joins, Asynchronous transformations and Lookups Destination Adapter Comparison Don’t turn the dataflow into a cursor SSIS Dataflow – Designing for performance (webinar) Any comments? Let me know! @Jamiet

  Read the article

• EM12c Release 4: Database as a Service Enhancements

  - by Adeesh Fulay

  Oracle Enterprise Manager 12.1.0.4 (or simply put EM12c R4) is the latest update to the product. As previous versions, this release provides tons of enhancements and bug fixes, attributing to improved stability and quality. One of the areas that is most exciting and has seen tremendous growth in the last few years is that of Database as a Service. EM12c R4 provides a significant update to Database as a Service. The key themes are: Comprehensive Database Service Catalog (includes single instance, RAC, and Data Guard) Additional Storage Options for Snap Clone (includes support for Database feature CloneDB) Improved Rapid Start Kits Extensible Metering and Chargeback Miscellaneous Enhancements 1. Comprehensive Database Service Catalog Before we get deep into implementation of a service catalog, lets first understand what it is and what benefits it provides. Per ITIL, a service catalog is an exhaustive list of IT services that an organization provides or offers to its employees or customers. Service catalogs have been widely popular in the space of cloud computing, primarily as the medium to provide standardized and pre-approved service definitions. There is already some good collateral out there that talks about Oracle database service catalogs. The two whitepapers i recommend reading are: Service Catalogs: Defining Standardized Database Service High Availability Best Practices for Database Consolidation: The Foundation for Database as a Service [Oracle MAA] EM12c comes with an out-of-the-box service catalog and self service portal since release 1. For the customers, it provides the following benefits: Present a collection of standardized database service definitions, Define standardized pools of hardware and software for provisioning, Role based access to cater to different class of users, Automated procedures to provision the predefined database definitions, Setup chargeback plans based on service tiers and database configuration sizes, etc Starting Release 4, the scope of services offered via the service catalog has been expanded to include databases with varying levels of availability - Single Instance (SI) or Real Application Clusters (RAC) databases with multiple data guard based standby databases. Some salient points of the data guard integration: Standby pools can now be defined across different datacenters or within the same datacenter as the primary (this helps in modelling the concept of near and far DR sites) The standby databases can be single instance, RAC, or RAC One Node databases Multiple standby databases can be provisioned, where the maximum limit is determined by the version of database software The standby databases can be in either mount or read only (requires active data guard option) mode All database versions 10g to 12c supported (as certified with EM 12c) All 3 protection modes can be used - Maximum availability, performance, security Log apply can be set to sync or async along with the required apply lag The different service levels or service tiers are popularly represented using metals - Platinum, Gold, Silver, Bronze, and so on. The Oracle MAA whitepaper (referenced above) calls out the various service tiers as defined by Oracle's best practices, but customers can choose any logical combinations from the table below:  Primary  Standby [1 or more]  EM 12cR4  SI  -  SI  SI  RAC -  RAC SI  RAC RAC  RON -  RON RON where RON = RAC One Node is supported via custom post-scripts in the service template A sample service catalog would look like the image below. Here we have defined 4 service levels, which have been deployed across 2 data centers, and have 3 standardized sizes. Again, it is important to note that this is just an example to get the creative juices flowing. I imagine each customer would come up with their own catalog based on the application requirements, their RTO/RPO goals, and the product licenses they own. In the screenwatch titled 'Build Service Catalog using EM12c DBaaS', I walk through the complete steps required to setup this sample service catalog in EM12c. 2. Additional Storage Options for Snap Clone In my previous blog posts, i have described the snap clone feature in detail. Essentially, it provides a storage agnostic, self service, rapid, and space efficient approach to solving your data cloning problems. The net benefit is that you get incredible amounts of storage savings (on average 90%) all while cloning databases in a matter of minutes. Space and Time, two things enterprises would love to save on. This feature has been designed with the goal of providing data cloning capabilities while protecting your existing investments in server, storage, and software. With this in mind, we have pursued with the dual solution approach of Hardware and Software. In the hardware approach, we connect directly to your storage appliances and perform all low level actions required to rapidly clone your databases. While in the software approach, we use an intermediate software layer to talk to any storage vendor or any storage configuration to perform the same low level actions. Thus delivering the benefits of database thin cloning, without requiring you to drastically changing the infrastructure or IT's operating style. In release 4, we expand the scope of options supported by snap clone with the addition of database CloneDB. While CloneDB is not a new feature, it was first introduced in 11.2.0.2 patchset, it has over the years become more stable and mature. CloneDB leverages a combination of Direct NFS (or dNFS) feature of the database, RMAN image copies, sparse files, and copy-on-write technology to create thin clones of databases from existing backups in a matter of minutes. It essentially has all the traits that we want to present to our customers via the snap clone feature. For more information on cloneDB, i highly recommend reading the following sources: Blog by Tim Hall: Direct NFS (DNFS) CloneDB in Oracle Database 11g Release 2 Oracle OpenWorld Presentation by Cern: Efficient Database Cloning using Direct NFS and CloneDB The advantages of the new CloneDB integration with EM12c Snap Clone are: Space and time savings Ease of setup - no additional software is required other than the Oracle database binary Works on all platforms Reduce the dependence on storage administrators Cloning process fully orchestrated by EM12c, and delivered to developers/DBAs/QA Testers via the self service portal Uses dNFS to delivers better performance, availability, and scalability over kernel NFS Complete lifecycle of the clones managed by EM12c - performance, configuration, etc 3. Improved Rapid Start Kits DBaaS deployments tend to be complex and its setup requires a series of steps. These steps are typically performed across different users and different UIs. The Rapid Start Kit provides a single command solution to setup Database as a Service (DBaaS) and Pluggable Database as a Service (PDBaaS). One command creates all the Cloud artifacts like Roles, Administrators, Credentials, Database Profiles, PaaS Infrastructure Zone, Database Pools and Service Templates. Once the Rapid Start Kit has been successfully executed, requests can be made to provision databases and PDBs from the self service portal. Rapid start kit can create complex topologies involving multiple zones, pools and service templates. It also supports standby databases and use of RMAN image backups. The Rapid Start Kit in reality is a simple emcli script which takes a bunch of xml files as input and executes the complete automation in a matter of seconds. On a full rack Exadata, it took only 40 seconds to setup PDBaaS end-to-end. This kit works for both Oracle's engineered systems like Exadata, SuperCluster, etc and also on commodity hardware. One can draw parallel to the Exadata One Command script, which again takes a bunch of inputs from the administrators and then runs a simple script that configures everything from network to provisioning the DB software. Steps to use the kit: The kit can be found under the SSA plug-in directory on the OMS: EM_BASE/oracle/MW/plugins/oracle.sysman.ssa.oms.plugin_12.1.0.8.0/dbaas/setup It can be run from this default location or from any server which has emcli client installed For most scenarios, you would use the script dbaas/setup/database_cloud_setup.py For Exadata, special integration is provided to reduce the number of inputs even further. The script to use for this scenario would be dbaas/setup/exadata_cloud_setup.py The database_cloud_setup.py script takes two inputs: Cloud boundary xml: This file defines the cloud topology in terms of the zones and pools along with host names, oracle home locations or container database names that would be used as infrastructure for provisioning database services. This file is optional in case of Exadata, as the boundary is well know via the Exadata system target available in EM. Input xml: This file captures inputs for users, roles, profiles, service templates, etc. Essentially, all inputs required to define the DB services and other settings of the self service portal. Once all the xml files have been prepared, invoke the script as follows for PDBaaS: emcli @database_cloud_setup.py -pdbaas -cloud_boundary=/tmp/my_boundary.xml -cloud_input=/tmp/pdb_inputs.xml          The script will prompt for passwords a few times for key users like sysman, cloud admin, SSA admin, etc. Once complete, you can simply log into EM as the self service user and request for databases from the portal. More information available in the Rapid Start Kit chapter in Cloud Administration Guide.  4. Extensible Metering and Chargeback  Last but not the least, Metering and Chargeback in release 4 has been made extensible in all possible regards. The new extensibility features allow customer, partners, system integrators, etc to : Extend chargeback to any target type managed in EM Promote any metric in EM as a chargeback entity Extend list of charge items via metric or configuration extensions Model abstract entities like no. of backup requests, job executions, support requests, etc  A slew of emcli verbs have also been added that allows administrators to create, edit, delete, import/export charge plans, and assign cost centers all via the command line. More information available in the Chargeback API chapter in Cloud Administration Guide. 5. Miscellaneous Enhancements There are other miscellaneous, yet important, enhancements that are worth a mention. These mostly have been asked by customers like you. These are: Custom naming of DB Services Self service users can provide custom names for DB SID, DB service, schemas, and tablespaces Every custom name is validated for uniqueness in EM 'Create like' of Service Templates Now creating variants of a service template is only a click away. This would be vital when you publish service templates to represent different database sizes or service levels. Profile viewer View the details of a profile like datafile, control files, snapshot ids, export/import files, etc prior to its selection in the service template Cleanup automation - for failed and successful requests Single emcli command to cleanup all remnant artifacts of a failed request Cleanup can be performed on a per request bases or by the entire pool As an extension, you can also delete successful requests Improved delete user workflow Allows administrators to reassign cloud resources to another user or delete all of them Support for multiple tablespaces for schema as a service In addition to multiple schemas, user can also specify multiple tablespaces per request I hope this was a good introduction to the new Database as a Service enhancements in EM12c R4. I encourage you to explore many of these new and existing features and give us feedback. Good luck! References: Cloud Management Page on OTN Cloud Administration Guide [Documentation] -- Adeesh Fulay (@adeeshf)

  Read the article

• mysql: Bind on unix socket: Permission denied

  - by Alex

  Can't start mysql with: sudo /usr/bin/mysqld_safe --datadir=/srv/mysql/myDB --log-error=/srv/mysql/logs/mysqld-myDB.log --pid-file=/srv/mysql/pids/mysqld-myDB.pid --user=mysql --socket=/srv/mysql/sockets/mysql-myDB.sock --port=3700 120222 13:40:48 mysqld_safe Starting mysqld daemon with databases from /srv/mysql/myDB 120222 13:40:54 mysqld_safe mysqld from pid file /srv/mysql/pids/mysqld-myDB.pid ended /srv/mysql/logs/mysqld-myDB.log: 120222 13:43:53 mysqld_safe Starting mysqld daemon with databases from /srv/mysql/myDB 120222 13:43:53 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld: Table 'plugin' is read only 120222 13:43:53 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 120222 13:43:53 InnoDB: Completed initialization of buffer pool 120222 13:43:53 InnoDB: Started; log sequence number 32 4232720908 120222 13:43:53 [ERROR] Can't start server : Bind on unix socket: Permission denied 120222 13:43:53 [ERROR] Do you already have another mysqld server running on socket: /srv/mysql/sockets/mysql-myDB.sock ? 120222 13:43:53 [ERROR] Aborting 120222 13:43:53 InnoDB: Starting shutdown... One instance mysqld is running: $ ps aux | grep mysql mysql 1093 0.0 0.2 169972 18700 ? Ssl 11:50 0:02 /usr/sbin/mysqld $ Port 3700 is available: $ netstat -a | grep 3700 $ Directory with sockets is empty: $ ls /srv/mysql/sockets/ $ There are all permissions: $ ls -l /srv/mysql/ total 20 drwxrwxrwx 2 mysql mysql 4096 2012-02-22 13:28 logs drwxrwxrwx 13 mysql mysql 4096 2012-02-22 13:44 myDB drwxrwxrwx 2 mysql mysql 4096 2012-02-22 12:55 pids drwxrwxrwx 2 mysql mysql 4096 2012-02-22 12:55 sockets drwxrwxrwx 2 mysql mysql 4096 2012-02-22 13:25 version Apparmor config: $cat /etc/apparmor.d/usr.sbin.mysqld # vim:syntax=apparmor # Last Modified: Tue Jun 19 17:37:30 2007 #include <tunables/global> /usr/sbin/mysqld flags=(complain) { #include <abstractions/base> #include <abstractions/nameservice> #include <abstractions/user-tmp> #include <abstractions/mysql> #include <abstractions/winbind> capability dac_override, capability sys_resource, capability setgid, capability setuid, network tcp, /etc/hosts.allow r, /etc/hosts.deny r, /etc/mysql/*.pem r, /etc/mysql/conf.d/ r, /etc/mysql/conf.d/* r, /etc/mysql/*.cnf r, /usr/lib/mysql/plugin/ r, /usr/lib/mysql/plugin/*.so* mr, /usr/sbin/mysqld mr, /usr/share/mysql/** r, /var/log/mysql.log rw, /var/log/mysql.err rw, /var/lib/mysql/ r, /var/lib/mysql/** rwk, /var/log/mysql/ r, /var/log/mysql/* rw, /{,var/}run/mysqld/mysqld.pid w, /{,var/}run/mysqld/mysqld.sock w, /srv/mysql/ r, /srv/mysql/** rwk, /sys/devices/system/cpu/ r, # Site-specific additions and overrides. See local/README for details. #include <local/usr.sbin.mysqld> } Any suggestions? UPD1: $ touch /srv/mysql/sockets/mysql-myDB.sock $ sudo chown mysql:mysql /srv/mysql/sockets/mysql-myDB.sock $ ls -l /srv/mysql/sockets/mysql-myDB.sock -rw-rw-r-- 1 mysql mysql 0 2012-02-22 14:29 /srv/mysql/sockets/mysql-myDB.sock $ sudo /usr/bin/mysqld_safe --datadir=/srv/mysql/myDB --log-error=/srv/mysql/logs/mysqld-myDB.log --pid-file=/srv/mysql/pids/mysqld-myDB.pid --user=mysql --socket=/srv/mysql/sockets/mysql-myDB.sock --port=3700 120222 14:30:18 mysqld_safe Can't log to error log and syslog at the same time. Remove all --log-error configuration options for --syslog to take effect. 120222 14:30:18 mysqld_safe Logging to '/srv/mysql/logs/mysqld-myDB.log'. 120222 14:30:18 mysqld_safe Starting mysqld daemon with databases from /srv/mysqlmyDB 120222 14:30:24 mysqld_safe mysqld from pid file /srv/mysql/pids/mysqld-myDB.pid ended $ ls -l /srv/mysql/sockets/mysql-myDB.sock ls: cannot access /srv/mysql/sockets/mysql-myDB.sock: No such file or directory $ UPD2: $ sudo netstat -lnp | grep mysql tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 1093/mysqld unix 2 [ ACC ] STREAM LISTENING 5912 1093/mysqld /var/run/mysqld/mysqld.sock $ sudo lsof | grep /srv/mysql/sockets/mysql-myDB.sock lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/sears/.gvfs Output information may be incomplete. UPD3: $ cat /etc/mysql/my.cnf # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• What's up with OCFS2?

  - by wcoekaer

  On Linux there are many filesystem choices and even from Oracle we provide a number of filesystems, all with their own advantages and use cases. Customers often confuse ACFS with OCFS or OCFS2 which then causes assumptions to be made such as one replacing the other etc... I thought it would be good to write up a summary of how OCFS2 got to where it is, what we're up to still, how it is different from other options and how this really is a cool native Linux cluster filesystem that we worked on for many years and is still widely used. Work on a cluster filesystem at Oracle started many years ago, in the early 2000's when the Oracle Database Cluster development team wrote a cluster filesystem for Windows that was primarily focused on providing an alternative to raw disk devices and help customers with the deployment of Oracle Real Application Cluster (RAC). Oracle RAC is a cluster technology that lets us make a cluster of Oracle Database servers look like one big database. The RDBMS runs on many nodes and they all work on the same data. It's a Shared Disk database design. There are many advantages doing this but I will not go into detail as that is not the purpose of my write up. Suffice it to say that Oracle RAC expects all the database data to be visible in a consistent, coherent way, across all the nodes in the cluster. To do that, there were/are a few options : 1) use raw disk devices that are shared, through SCSI, FC, or iSCSI 2) use a network filesystem (NFS) 3) use a cluster filesystem(CFS) which basically gives you a filesystem that's coherent across all nodes using shared disks. It is sort of (but not quite) combining option 1 and 2 except that you don't do network access to the files, the files are effectively locally visible as if it was a local filesystem. So OCFS (Oracle Cluster FileSystem) on Windows was born. Since Linux was becoming a very important and popular platform, we decided that we would also make this available on Linux and thus the porting of OCFS/Windows started. The first version of OCFS was really primarily focused on replacing the use of Raw devices with a simple filesystem that lets you create files and provide direct IO to these files to get basically native raw disk performance. The filesystem was not designed to be fully POSIX compliant and it did not have any where near good/decent performance for regular file create/delete/access operations. Cache coherency was easy since it was basically always direct IO down to the disk device and this ensured that any time one issues a write() command it would go directly down to the disk, and not return until the write() was completed. Same for read() any sort of read from a datafile would be a read() operation that went all the way to disk and return. We did not cache any data when it came down to Oracle data files. So while OCFS worked well for that, since it did not have much of a normal filesystem feel, it was not something that could be submitted to the kernel mail list for inclusion into Linux as another native linux filesystem (setting aside the Windows porting code ...) it did its job well, it was very easy to configure, node membership was simple, locking was disk based (so very slow but it existed), you could create regular files and do regular filesystem operations to a certain extend but anything that was not database data file related was just not very useful in general. Logfiles ok, standard filesystem use, not so much. Up to this point, all the work was done, at Oracle, by Oracle developers. Once OCFS (1) was out for a while and there was a lot of use in the database RAC world, many customers wanted to do more and were asking for features that you'd expect in a normal native filesystem, a real "general purposes cluster filesystem". So the team sat down and basically started from scratch to implement what's now known as OCFS2 (Oracle Cluster FileSystem release 2). Some basic criteria were : Design it with a real Distributed Lock Manager and use the network for lock negotiation instead of the disk Make it a Linux native filesystem instead of a native shim layer and a portable core Support standard Posix compliancy and be fully cache coherent with all operations Support all the filesystem features Linux offers (ACL, extended Attributes, quotas, sparse files,...) Be modern, support large files, 32/64bit, journaling, data ordered journaling, endian neutral, we can mount on both endian /cross architecture,.. Needless to say, this was a huge development effort that took many years to complete. A few big milestones happened along the way... OCFS2 was development in the open, we did not have a private tree that we worked on without external code review from the Linux Filesystem maintainers, great folks like Christopher Hellwig reviewed the code regularly to make sure we were not doing anything out of line, we submitted the code for review on lkml a number of times to see if we were getting close for it to be included into the mainline kernel. Using this development model is standard practice for anyone that wants to write code that goes into the kernel and having any chance of doing so without a complete rewrite or.. shall I say flamefest when submitted. It saved us a tremendous amount of time by not having to re-fit code for it to be in a Linus acceptable state. Some other filesystems that were trying to get into the kernel that didn't follow an open development model had a lot harder time and a lot harsher criticism. March 2006, when Linus released 2.6.16, OCFS2 officially became part of the mainline kernel, it was accepted a little earlier in the release candidates but in 2.6.16. OCFS2 became officially part of the mainline Linux kernel tree as one of the many filesystems. It was the first cluster filesystem to make it into the kernel tree. Our hope was that it would then end up getting picked up by the distribution vendors to make it easy for everyone to have access to a CFS. Today the source code for OCFS2 is approximately 85000 lines of code. We made OCFS2 production with full support for customers that ran Oracle database on Linux, no extra or separate support contract needed. OCFS2 1.0.0 started being built for RHEL4 for x86, x86-64, ppc, s390x and ia64. For RHEL5 starting with OCFS2 1.2. SuSE was very interested in high availability and clustering and decided to build and include OCFS2 with SLES9 for their customers and was, next to Oracle, the main contributor to the filesystem for both new features and bug fixes. Source code was always available even prior to inclusion into mainline and as of 2.6.16, source code was just part of a Linux kernel download from kernel.org, which it still is, today. So the latest OCFS2 code is always the upstream mainline Linux kernel. OCFS2 is the cluster filesystem used in Oracle VM 2 and Oracle VM 3 as the virtual disk repository filesystem. Since the filesystem is in the Linux kernel it's released under the GPL v2 The release model has always been that new feature development happened in the mainline kernel and we then built consistent, well tested, snapshots that had versions, 1.2, 1.4, 1.6, 1.8. But these releases were effectively just snapshots in time that were tested for stability and release quality. OCFS2 is very easy to use, there's a simple text file that contains the node information (hostname, node number, cluster name) and a file that contains the cluster heartbeat timeouts. It is very small, and very efficient. As Sunil Mushran wrote in the manual : OCFS2 is an efficient, easily configured, quickly installed, fully integrated and compatible, feature-rich, architecture and endian neutral, cache coherent, ordered data journaling, POSIX-compliant, shared disk cluster file system. Here is a list of some of the important features that are included : Variable Block and Cluster sizes Supports block sizes ranging from 512 bytes to 4 KB and cluster sizes ranging from 4 KB to 1 MB (increments in power of 2). Extent-based Allocations Tracks the allocated space in ranges of clusters making it especially efficient for storing very large files. Optimized Allocations Supports sparse files, inline-data, unwritten extents, hole punching and allocation reservation for higher performance and efficient storage. File Cloning/snapshots REFLINK is a feature which introduces copy-on-write clones of files in a cluster coherent way. Indexed Directories Allows efficient access to millions of objects in a directory. Metadata Checksums Detects silent corruption in inodes and directories. Extended Attributes Supports attaching an unlimited number of name:value pairs to the file system objects like regular files, directories, symbolic links, etc. Advanced Security Supports POSIX ACLs and SELinux in addition to the traditional file access permission model. Quotas Supports user and group quotas. Journaling Supports both ordered and writeback data journaling modes to provide file system consistency in the event of power failure or system crash. Endian and Architecture neutral Supports a cluster of nodes with mixed architectures. Allows concurrent mounts on nodes running 32-bit and 64-bit, little-endian (x86, x86_64, ia64) and big-endian (ppc64) architectures. In-built Cluster-stack with DLM Includes an easy to configure, in-kernel cluster-stack with a distributed lock manager. Buffered, Direct, Asynchronous, Splice and Memory Mapped I/Os Supports all modes of I/Os for maximum flexibility and performance. Comprehensive Tools Support Provides a familiar EXT3-style tool-set that uses similar parameters for ease-of-use. The filesystem was distributed for Linux distributions in separate RPM form and this had to be built for every single kernel errata release or every updated kernel provided by the vendor. We provided builds from Oracle for Oracle Linux and all kernels released by Oracle and for Red Hat Enterprise Linux. SuSE provided the modules directly for every kernel they shipped. With the introduction of the Unbreakable Enterprise Kernel for Oracle Linux and our interest in reducing the overhead of building filesystem modules for every minor release, we decide to make OCFS2 available as part of UEK. There was no more need for separate kernel modules, everything was built-in and a kernel upgrade automatically updated the filesystem, as it should. UEK allowed us to not having to backport new upstream filesystem code into an older kernel version, backporting features into older versions introduces risk and requires extra testing because the code is basically partially rewritten. The UEK model works really well for continuing to provide OCFS2 without that extra overhead. Because the RHEL kernel did not contain OCFS2 as a kernel module (it is in the source tree but it is not built by the vendor in kernel module form) we stopped adding the extra packages to Oracle Linux and its RHEL compatible kernel and for RHEL. Oracle Linux customers/users obviously get OCFS2 included as part of the Unbreakable Enterprise Kernel, SuSE customers get it by SuSE distributed with SLES and Red Hat can decide to distribute OCFS2 to their customers if they chose to as it's just a matter of compiling the module and making it available. OCFS2 today, in the mainline kernel is pretty much feature complete in terms of integration with every filesystem feature Linux offers and it is still actively maintained with Joel Becker being the primary maintainer. Since we use OCFS2 as part of Oracle VM, we continue to look at interesting new functionality to add, REFLINK was a good example, and as such we continue to enhance the filesystem where it makes sense. Bugfixes and any sort of code that goes into the mainline Linux kernel that affects filesystems, automatically also modifies OCFS2 so it's in kernel, actively maintained but not a lot of new development happening at this time. We continue to fully support OCFS2 as part of Oracle Linux and the Unbreakable Enterprise Kernel and other vendors make their own decisions on support as it's really a Linux cluster filesystem now more than something that we provide to customers. It really just is part of Linux like EXT3 or BTRFS etc, the OS distribution vendors decide. Do not confuse OCFS2 with ACFS (ASM cluster Filesystem) also known as Oracle Cloud Filesystem. ACFS is a filesystem that's provided by Oracle on various OS platforms and really integrates into Oracle ASM (Automatic Storage Management). It's a very powerful Cluster Filesystem but it's not distributed as part of the Operating System, it's distributed with the Oracle Database product and installs with and lives inside Oracle ASM. ACFS obviously is fully supported on Linux (Oracle Linux, Red Hat Enterprise Linux) but OCFS2 independently as a native Linux filesystem is also, and continues to also be supported. ACFS is very much tied into the Oracle RDBMS, OCFS2 is just a standard native Linux filesystem with no ties into Oracle products. Customers running the Oracle database and ASM really should consider using ACFS as it also provides storage/clustered volume management. Customers wanting to use a simple, easy to use generic Linux cluster filesystem should consider using OCFS2. To learn more about OCFS2 in detail, you can find good documentation on http://oss.oracle.com/projects/ocfs2 in the Documentation area, or get the latest mainline kernel from http://kernel.org and read the source. One final, unrelated note - since I am not always able to publicly answer or respond to comments, I do not want to selectively publish comments from readers. Sometimes I forget to publish comments, sometime I publish them and sometimes I would publish them but if for some reason I cannot publicly comment on them, it becomes a very one-sided stream. So for now I am going to not publish comments from anyone, to be fair to all sides. You are always welcome to email me and I will do my best to respond to technical questions, questions about strategy or direction are sometimes not possible to answer for obvious reasons.

  Read the article

• Integrating HTML into Silverlight Applications

  - by dwahlin

  Looking for a way to display HTML content within a Silverlight application? If you haven’t tried doing that before it can be challenging at first until you know a few tricks of the trade.  Being able to display HTML is especially handy when you’re required to display RSS feeds (with embedded HTML), SQL Server Reporting Services reports, PDF files (not actually HTML – but the techniques discussed will work), or other HTML content.  In this post I'll discuss three options for displaying HTML content in Silverlight applications and describe how my company is using these techniques in client applications. Displaying HTML Overlays If you need to display HTML over a Silverlight application (such as an RSS feed containing HTML data in it) you’ll need to set the Silverlight control’s windowless parameter to true. This can be done using the object tag as shown next: <object data="data:application/x-silverlight-2," type="application/x-silverlight-2" width="100%" height="100%"> <param name="source" value="ClientBin/HTMLAndSilverlight.xap"/> <param name="onError" value="onSilverlightError" /> <param name="background" value="white" /> <param name="minRuntimeVersion" value="4.0.50401.0" /> <param name="autoUpgrade" value="true" /> <param name="windowless" value="true" /> <a href="http://go.microsoft.com/fwlink/?LinkID=149156&v=4.0.50401.0" style="text-decoration:none"> <img src="http://go.microsoft.com/fwlink/?LinkId=161376" alt="Get Microsoft Silverlight" style="border-style:none"/> </a> </object> By setting the control to “windowless” you can overlay HTML objects by using absolute positioning and other CSS techniques. Keep in mind that on Windows machines the windowless setting can result in a performance hit when complex animations or HD video are running since the plug-in content is displayed directly by the browser window. It goes without saying that you should only set windowless to true when you really need the functionality it offers. For example, if I want to display my blog’s RSS content on top of a Silverlight application I could set windowless to true and create a user control that grabbed the content and output it using a DataList control: <style type="text/css"> a {text-decoration:none;font-weight:bold;font-size:14pt;} </style> <div style="margin-top:10px; margin-left:10px;margin-right:5px;"> <asp:DataList ID="RSSDataList" runat="server" DataSourceID="RSSDataSource"> <ItemTemplate> <a href='<%# XPath("link") %>'><%# XPath("title") %></a> <br /> <%# XPath("description") %> <br /> </ItemTemplate> </asp:DataList> <asp:XmlDataSource ID="RSSDataSource" DataFile="http://weblogs.asp.net/dwahlin/rss.aspx" XPath="rss/channel/item" CacheDuration="60" runat="server" /> </div> The user control can then be placed in the page hosting the Silverlight control as shown below. This example adds a Close button, additional content to display in the overlay window and the HTML generated from the user control. <div id="RSSDiv"> <div style="background-color:#484848;border:1px solid black;height:35px;width:100%;"> <img alt="Close Button" align="right" src="Images/Close.png" onclick="HideOverlay();" style="cursor:pointer;" /> </div> <div style="overflow:auto;width:800px;height:565px;"> <div style="float:left;width:100px;height:103px;margin-left:10px;margin-top:5px;"> <img src="http://weblogs.asp.net/blogs/dwahlin/dan2008.jpg" style="border:1px solid Gray" /> </div> <div style="float:left;width:300px;height:103px;margin-top:5px;"> <a href="http://weblogs.asp.net/dwahlin" style="margin-left:10px;font-size:20pt;">Dan Wahlin's Blog</a> </div> <br /><br /><br /> <div style="clear:both;margin-top:20px;"> <uc:BlogRoller ID="BlogRoller" runat="server" /> </div> </div> </div> Of course, we wouldn’t want the RSS HTML content to be shown until requested. Once it’s requested the absolute position of where it should show above the Silverlight control can be set using standard CSS styles. The following ID selector named #RSSDiv handles hiding the overlay div shown above and determines where it will be display on the screen. #RSSDiv { background-color:White; position:absolute; top:100px; left:300px; width:800px; height:600px; border:1px solid black; display:none; } Now that the HTML content to display above the Silverlight control is set, how can we show it as a user clicks a HyperlinkButton or other control in the application? Fortunately, Silverlight provides an excellent HTML bridge that allows direct access to content hosted within a page. The following code shows two JavaScript functions that can be called from Siverlight to handle showing or hiding HTML overlay content. The two functions rely on jQuery (http://www.jQuery.com) to make it easy to select HTML objects and manipulate their properties: function ShowOverlay() { rssDiv.css('display', 'block'); } function HideOverlay() { rssDiv.css('display', 'none'); } Calling the ShowOverlay function is as simple as adding the following code into the Silverlight application within a button’s Click event handler: private void OverlayHyperlinkButton_Click(object sender, RoutedEventArgs e) { HtmlPage.Window.Invoke("ShowOverlay"); } The result of setting the Silverlight control’s windowless parameter to true and showing the HTML overlay content is shown in the following screenshot:   Thinking Outside the Box to Show HTML Content Setting the windowless parameter to true may not be a viable option for some Silverlight applications or you may simply want to go about showing HTML content a different way. The next technique I’ll show takes advantage of simple HTML, CSS and JavaScript code to handle showing HTML content while a Silverlight application is running in the browser. Keep in mind that with Silverlight’s HTML bridge feature you can always pop-up HTML content in a new browser window using code similar to the following: System.Windows.Browser.HtmlPage.Window.Navigate( new Uri("http://silverlight.net"), "_blank"); For this example I’ll demonstrate how to hide the Silverlight application while maximizing a container div containing the HTML content to show. This allows HTML content to take up the full screen area of the browser without having to set windowless to true and when done right can make the user feel like they never left the Silverlight application. The following HTML shows several div elements that are used to display HTML within the same browser window as the Silverlight application: <div id="JobPlanDiv"> <div style="vertical-align:middle"> <img alt="Close Button" align="right" src="Images/Close.png" onclick="HideJobPlanIFrame();" style="cursor:pointer;" /> </div> <div id="JobPlan_IFrame_Container" style="height:95%;width:100%;margin-top:37px;"></div> </div> The JobPlanDiv element acts as a container for two other divs that handle showing a close button and hosting an iframe that will be added dynamically at runtime. JobPlanDiv isn’t visible when the Silverlight application loads due to the following ID selector added into the page: #JobPlanDiv { position:absolute; background-color:#484848; overflow:hidden; left:0; top:0; height:100%; width:100%; display:none; } When the HTML content needs to be shown or hidden the JavaScript functions shown next can be used: var jobPlanIFrameID = 'JobPlan_IFrame'; var slHost = null; var jobPlanContainer = null; var jobPlanIFrameContainer = null; var rssDiv = null; $(document).ready(function () { slHost = $('#silverlightControlHost'); jobPlanContainer = $('#JobPlanDiv'); jobPlanIFrameContainer = $('#JobPlan_IFrame_Container'); rssDiv = $('#RSSDiv'); }); function ShowJobPlanIFrame(url) { jobPlanContainer.css('display', 'block'); $('<iframe id="' + jobPlanIFrameID + '" src="' + url + '" style="height:100%;width:100%;" />') .appendTo(jobPlanIFrameContainer); slHost.css('width', '0%'); } function HideJobPlanIFrame() { jobPlanContainer.css('display', 'none'); $('#' + jobPlanIFrameID).remove(); slHost.css('width', '100%'); } ShowJobPlanIFrame() handles showing the JobPlanDiv div and adding an iframe into it dynamically. Once JobPlanDiv is shown, the Silverlight control host has its width set to a value of 0% to allow the control to stay alive while making it invisible to the user. I found that this technique works better across multiple browsers as opposed to manipulating the Silverlight control host div’s display or visibility properties. Now that you’ve seen the code to handle showing and hiding the HTML content area, let’s switch focus to the Silverlight application. As a user clicks on a link such as “View Report” the ShowJobPlanIFrame() JavaScript function needs to be called. The following code handles that task: private void ReportHyperlinkButton_Click(object sender, RoutedEventArgs e) { ShowBrowser(_BaseUrl + "/Report.aspx"); } public void ShowBrowser(string url) { HtmlPage.Window.Invoke("ShowJobPlanIFrame", url); } Any URL can be passed into the ShowBrowser() method which handles invoking the JavaScript function. This includes standard web pages or even PDF files. We’ve used this technique frequently with our SmartPrint control (http://www.smartwebcontrols.com) which converts Silverlight screens into PDF documents and displays them. Here’s an example of the content generated:   Silverlight 4’s WebBrowser Control Both techniques shown to this point work well when Silverlight is running in-browser but not so well when it’s running out-of-browser since there’s no host page that you can access using the HTML bridge. Fortunately, Silverlight 4 provides a WebBrowser control that can be used to perform the same functionality quite easily. We’re currently using it in client applications to display PDF documents, SSRS reports and standard HTML content. Using the WebBrowser control simplifies the application quite a bit since no JavaScript is required if the application only runs out-of-browser. Here’s a simple example of defining the WebBrowser control in XAML. I typically define it in MainPage.xaml when a Silverlight Navigation template is used to create the project so that I can re-use the functionality across multiple screens. <Grid x:Name="WebBrowserGrid" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Visibility="Collapsed"> <StackPanel HorizontalAlignment="Stretch" VerticalAlignment="Stretch"> <Border Background="#484848" HorizontalAlignment="Stretch" Height="40"> <Image x:Name="WebBrowserImage" Width="100" Height="33" Cursor="Hand" HorizontalAlignment="Right" Source="/HTMLAndSilverlight;component/Assets/Images/Close.png" MouseLeftButtonDown="WebBrowserImage_MouseLeftButtonDown" /> </Border> <WebBrowser x:Name="JobPlanReportWebBrowser" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" /> </StackPanel> </Grid> Looking through the XAML you can see that a close image is defined along with the WebBrowser control. Because the URL that the WebBrowser should navigate to isn’t known at design time no value is assigned to the control’s Source property. If the XAML shown above is left “as is” you’ll find that any HTML content assigned to the WebBrowser doesn’t display properly. This is due to no height or width being set on the control. To handle this issue the following code is added into the XAML’s code-behind file to dynamically determine the height and width of the page and assign it to the WebBrowser. This is done by handling the SizeChanged event. void MainPage_SizeChanged(object sender, SizeChangedEventArgs e) { WebBrowserGrid.Height = JobPlanReportWebBrowser.Height = ActualHeight; WebBrowserGrid.Width = JobPlanReportWebBrowser.Width = ActualWidth; } When the user wants to view HTML content they click a button which executes the code shown in next: public void ShowBrowser(string url) { if (Application.Current.IsRunningOutOfBrowser) { JobPlanReportWebBrowser.NavigateToString("<html><body><iframe src='" + url + "' style='width:100%;height:97%;' /></body></html>"); WebBrowserGrid.Visibility = Visibility.Visible; } else { HtmlPage.Window.Invoke("ShowJobPlanIFrame", url); } } private void WebBrowserImage_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { WebBrowserGrid.Visibility = Visibility.Collapsed; }   Looking through the code you’ll see that it checks to see if the Silverlight application is running out-of-browser and then either displays the WebBrowser control or runs the JavaScript function discussed earlier. Although the WebBrowser control’s Source property could be assigned the URI of the page to navigate to, by assigning HTML content using the NavigateToString() method and adding an iframe, content can be shown from any site including cross-domain sites. This is especially handy when you need to grab a page from a reporting site that’s in a different domain than the Silverlight application. Here’s an example of viewing  PDF file inside of an out-of-browser application. The first image shows the application running out-of-browser before the user clicks a PDF HyperlinkButton.  The second image shows the PDF being displayed.   While there are certainly other techniques that can be used, the ones shown here have worked well for us in different applications and provide the ability to display HTML content in-browser or out-of-browser. Feel free to add a comment if you have another tip or trick you like to use when working with HTML content in Silverlight applications.   Download Code Sample   For more information about onsite, online and video training, mentoring and consulting solutions for .NET, SharePoint or Silverlight please visit http://www.thewahlingroup.com.

  Read the article

• High Load mysql on Debian server stops every day. Why?

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ? I'm already try mysqltuner and tunung-primer.sh , but they marked all green. Mysqltuner output mysqltuner >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.24-9-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 112G (Tables: 1528) [--] Data in InnoDB tables: 39G (Tables: 340) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 344 -------- Performance Metrics ------------------------------------------------- [--] Up for: 8h 18m 33s (14M q [478.333 qps], 259K conn, TX: 9B, RX: 5B) [--] Reads / Writes: 84% / 16% [--] Total buffers: 10.5G global + 81.1M per thread (200 max threads) [OK] Maximum possible memory usage: 26.3G (83% of installed RAM) [OK] Slow queries: 1% (259K/14M) [!!] Highest connection usage: 100% (201/200) [OK] Key buffer size / total MyISAM indexes: 1.5G/5.6G [OK] Key buffer hit rate: 100.0% (6B cached / 1M reads) [OK] Query cache efficiency: 74.3% (8M cached / 11M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 247K sorts) [!!] Joins performed without indexes: 106025 [!!] Temporary tables created on disk: 49% (351K on disk / 715K total) [OK] Thread cache hit rate: 99% (249 created / 259K connections) [!!] Table cache hit rate: 15% (2K open / 13K opened) [OK] Open file limit used: 15% (3K/20K) [OK] Table locks acquired immediately: 99% (4M immediate / 4M locks) [!!] InnoDB data size / buffer pool: 39.4G/5.9G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce or eliminate persistent connections to reduce connection usage Adjust your join queries to always utilize indexes Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Variables to adjust: max_connections (> 200) wait_timeout (< 600) interactive_timeout (< 600) join_buffer_size (> 5.0M, or always use indexes with joins) table_cache (> 10000) innodb_buffer_pool_size (>= 39G) Mysql primer output -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.5.24-9-log x86_64 Uptime = 0 days 8 hrs 20 min 50 sec Avg. qps = 478 Total Questions = 14369568 Threads Connected = 16 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1.000000 sec. You have 260626 out of 14369701 that take longer than 1.000000 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is enabled Binlog sync is not enabled, you could loose binlog records during a server crash WORKER THREADS Current thread_cache_size = 50 Current threads_cached = 45 Current threads_per_sec = 0 Historic threads_per_sec = 0 Your thread_cache_size is fine MAX CONNECTIONS Current max_connections = 200 Current threads_connected = 11 Historic max_used_connections = 201 The number of used connections is 100% of the configured maximum. You should raise max_connections INNODB STATUS Current InnoDB index space = 214 M Current InnoDB data space = 39.40 G Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 5.85 G Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 23.46 G Configured Max Per-thread Buffers : 15.84 G Configured Max Global Buffers : 7.54 G Configured Max Memory Limit : 23.39 G Physical Memory : 31.40 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 5.61 G Current key_buffer_size = 1.47 G Key cache miss rate is 1 : 5578 Key buffer free ratio = 77 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is enabled Current query_cache_size = 200 M Current query_cache_used = 101 M Current query_cache_limit = 50 M Current Query cache Memory fill ratio = 50.59 % Current query_cache_min_res_unit = 4 K MySQL won't cache query results that are larger than query_cache_limit in size SORT OPERATIONS Current sort_buffer_size = 64 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 5.00 M You have had 106606 queries where a join could not use an index properly You have had 8 joins without keys that check for key usage after each row join_buffer_size >= 4 M This is not advised You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. OPEN FILES LIMIT Current open_files_limit = 20210 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_open_cache = 10000 tables Current table_definition_cache = 2000 tables You have a total of 1910 tables You have 2151 open tables. The table_cache value seems to be fine TEMP TABLES Current max_heap_table_size = 2.92 G Current tmp_table_size = 2.92 G Of 366426 temp tables, 49% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables. TABLE SCANS Current read_buffer_size = 3 M Current table scan ratio = 2846 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 185 You may benefit from selective use of InnoDB. If you have long running SELECT's against MyISAM tables and perform frequent updates consider setting 'low_priority_updates=1'

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >