Search Results

Search found 99 results on 4 pages for 'displayport'.

Page 4/4 | < Previous Page | 1 2 3 4 

  • Control external monitor brightness

    - by remi
    Hello Ubuntu community, I can control the brightness of my DELL U2713HM connected with DisplayPort via the command: ddccontrol -p -r 0x10 -w 53 where in this example the number 53 represents the brightness level (range 0 to 100). But I don't know how to link the command to my brightness keys on my keyboard. I searched already, but just found answers to integrated laptop screens. In /sys/class/backlight is the folder acpi_video0 with some subfolders and files. The file actual_brightness contains a number from 0 to 20, which is changing when I press the brightness keys. How do I get my external monitor listed as a device in /sys/class/backlight ? PS: I am running a fresh Ubuntu 12.10 install with integrated graphics Intel HD4000.

    Read the article

  • Bumblebee screwd up my grafics-settings

    - by user104762
    I had my system working pretty good with the external monitor working with the displayport. Unfortunately I felt that I should try to install Bumblebee. It didn't work. The monitor wasn't recognised. So I uninstalled it with the instructions on ubuntus wiki. But it didn't get back to the way it was. And when I copied the Purge-command it started deleting other stuff to, like Cheese and whatnot. I can't get the external monitor to be recognised. If I activate Optimus I get the right settings on my laptopscreen, but no Nvidia-drivers. If I deactivate optimus I get poor resolution on my laptopscreen, and still don't recognise the external monitor. But the Nvidia-drivers show up and can be activated. Why oh why did I have to try to install Bumblebee.

    Read the article

  • Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

    - by cragno
    I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

    Read the article

  • Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

    - by Robert
    From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

    Read the article

  • Can DVI look different?

    - by queueoverflow
    I have a desktop with an nVidia GT 9500 which has two DVI slots. I have a 24" TN-Panel TFT on that and it looks pretty good. Then I hooked it onto the DisplayPort of my ThinkPad with the Intel HD 3000 card with an DP-DVI adapter and I think that the fonts look even clearer. Both computers run Kubuntu 12.04, although the ThinkPad is freshly set up, while the desktop is migrated from the previous release. Is this a hardware thing or is it just some setting in the anti-aliasing or sub-pixel-hinting?

    Read the article

  • In Process Explorer is it possible change scaling of activity graph the be able to further analyse graph?

    - by therobyouknow
    Is there any way to zoom in, in the System Internals Process Explorer graph? Background I'm trying to work out why my PC freezes/locks up for about a second (the pointer does not move) every so often. This has only been happening for the last 2 days. There is a very narrow spike associated with the freeze, but it's hard to hover over it an analyse what is causing it. My PC spec: ThinkPad X201S 1440x900 i7 2.0GHz 8Gb RAM, 256GB Samsung 840Pro SSD, Windows 8.1 Pro 64bit CalDigit USB 3.0 ExpressCard 34, Ultrabase X200 with DisplayPort to HDMI

    Read the article

  • Connecting Dell XPS 17/HP Pavilion dv7 (nvidia GT 650M) to Apple LED Cinema Display for 2560x1440 resolution from notebook

    - by alphaTrader
    Is there any way to run higher than 1080p resolution from a Dell XPS 15/17 or HP Pavilion laptop? Specifically, I am planning to buy Dell XPS L721X or HP Pavilion dv7-7005tx with nvidia GeForce GT 650M and connect it to the Apple LED Cinema display via mini Displayport (I don't think Thunderbolt is supported on these notebooks). The idea is to get 1080p on the notebook and 2560x1440 on the main display. Only one of the montitors is active at any time. I asked Dell and they weren't of much help.

    Read the article

  • DELL U2410 Monitor(Display Port) & Graphic card

    - by Anj
    I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

    Read the article

  • Windows 8.1 triple monitors - can't enable all 3 at the same time

    - by Jeckerson
    Today decided to update from Win8 Pro to Win8.1. Everything was fine with enabled 3 monitors (Extended mode, not Eyefinity) at the same time. But after update can't enable 3d monitor, only 2 could be enabled at the same time. Did current things before write question here: Remove all drivers, reboots, re-installs Different cable input's and orders of enabling Tried to enable each monitor from Catalyst and Windows Screen Resolution Spec's: Windows 8.1 Pro XFX HD7970 3 of LG E2442 Cables: 2 DVI 1 HDMI Googled for many time and found one of possible solution is to buy ACTIVE mini DisplayPort to DVI/HDMI, but maybe there are some another more simple solutions?

    Read the article

  • Manage 2 displays remotely

    - by neurino
    I have a pc with a nVidia Quadro graphic card. The card has 2 DisplayPort outs where 2 40" Full HD TV are connected. I need to run 2 separate fullscreen videos, one each display. The problem is displays are far from the pc station and I cannot control them from there. I tried with a remote desktop connection but when I connect screen 1 shows login and screen 2 simply blackens (I'm logged off). The pc, an HP, also has his native graphics card still installed it would be nice if I could connect there a 15" monitor with the desktop on and use the TVs only as secondary where I can send fullscreen videos. Any clue?

    Read the article

  • Does a HDMI-to-DVI (dual link) adapter exist? I don't care about the price

    - by alex k
    My monitor supports full-resolution display (2560x1440) only when connected to through either the DVI-D dual link port, or the DisplayPort. My laptop, though, has neither of these two kinds of output. Instead, all it's got is a HDMI port (which is version 1.3, and I also read that the laptop's graphics chipset supports 2560x1440 at 60Hz). So I'm wondering whether anyone has ever seen an HDMI-to-DVI dual link adapter, which will carry my ultra-highres signal to the monitor I just bought. So far I haven't seen any, and don't even know whether such an adapter (which I understand would have to be active, USB-powered and expensive (but I don't care)) exists.

    Read the article

  • Machine Check Exception

    - by Karl Entwistle
    When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

    Read the article

  • HDMI & Display Port stopped work on 11.10

    - by dizzy
    After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

    Read the article

  • Xorg.conf (nvidia) Second Monitor getting settings of first

    - by HennyH
    I've been spending the weekend (and some time before that) trying to set up my Korean QHD270 and Benq G2222HDL monitors with Ubuntu 13.10. With the nouveau drivers install both monitor function perfectly fine. After installing the nvidia drivers the Benq works but the QHD270 does not. Now, after days of struggling I managed to get the QHD270 to work following a mixture of blogs, particularly; this one and learnitwithme. Now, unfortunatly my G2222HDL does not work. I fixed the QHD270 by supplying a custom EDID, my xorg.conf looks like so (excluding keyboard and mouse): Section "ServerLayout" Identifier "Layout0" Screen "Default Screen" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" Option "CustomEDID" "DFP:/etc/X11/edid-shimian.bin" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Now, I tried defining a new Device,Monitor and Screen then in ServerLayout adding Screen "Second Screen" RightOf "Default Screen", but after doing so neither monitor worked. Hoping to fix the issue using a GUI based tool I opened up NVIDIA X Server Settings, which shows my current layout as: It seems that something is being output to the monitor, as suggested by my print screen: Any help would be greatly appreciated. Output of xrandr: Screen 0: minimum 8 x 8, current 5120 x 1440, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ HDMI-0 disconnected (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DVI-D-0 connected 2560x1440+2560+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ DP-1 disconnected (normal left inverted right x axis y axis) And an extract from my log file (perhaps this is relevant?) [ 7.862] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:2:0:0 [ 7.862] (--) NVIDIA(0): CRT-0 [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0) (boot, connected) [ 7.862] (--) NVIDIA(0): DFP-1 [ 7.862] (--) NVIDIA(0): DFP-2 [ 7.862] (--) NVIDIA(0): DFP-3 [ 7.862] (--) NVIDIA(0): DFP-4 [ 7.862] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): Internal Dual Link TMDS [ 7.862] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-4: Internal DisplayPort

    Read the article

  • Can a 10-bit monitor connection preserve all tones in 8-bit sRGB gradients on a wide-gamut monitor?

    - by hjb981
    This question is about color management and the use of a higher color depth, 10 bits per channel (30 bits in total, resulting in 1.07 billion colors, or 1024 shades of gray, sometimes referred to as "deep color") compared to the standard of 8 bits per channel (24 bits in total, 16.7 million colors, 256 shades of gray, sometimes referred to as "true color"). Do not confuse with "32 bit color", which usually refers to standard 8 bit color with an extra channel ("alpha channel") for transparency (used to achieve effects like semi-transparent windows etc). The following can be assumed to be in place: 1: A wide-gamut monitor that supports 10-bit input. Further, it can be assumed that the monitor has been calibrated to its native gamut and that an ICC color profile has been created. 2: A graphics card that supports 10-bit output (and is connected to the monitor via DisplayPort). 3: Drivers for the graphics card that support 10-bit output. If applications that support 10-bit output and color profiles would be used, I would expect them to display images that were saved using different color spaces correctly. For example, both an sRGB and an adobeRGB image should be displayed correctly. If an sRGB image was saved using 8 bits per channel (almost always the case), then the 10-bit signal path would ensure that no tonal gradients were lost in the conversion from the sRGB of the image to the native color space of the monitor. For example: If the image contains a pixel that is pure red in 8 bits (255,0,0), the corresponding value in 10 bits would be (1023,0,0). However, since the monitor has a larger color space than sRGB, sending the signal (1023,0,0) to the monitor would result in a red that was too saturated. Therefore, according to the ICC color profile, the signal would be transformed into a different value with less red saturation, for example (987,0,0). Since there are still plenty of levels left between 0 and 987, all 256 values (0-255) for red in the sRGB color space of the file could be uniquely mapped to color-corrected 10-bit values in the monitor's native color space. However, if the conversion was done in 8 bits, (255,0,0) would be translated to (246,0,0), and there would now only be 247 available levels for the red channel instead of 256, degrading the displayed image quality. My question is: how does this work on Ubuntu? Let's say that I use Firefox (which is color-aware and uses ICC color profiles). Would I get 10-bit processing, thus preserving all levels of an 8-bit picture? What is the situation like for other applications, especially photo applications like Shotwell, Rawtherapee, Darktable, RawStudio, Photivo etc? Does Ubuntu differ from other operating systems (Linux and others) on this point?

    Read the article

  • How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

    - by joe larson
    Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

    Read the article

  • Windows Remote Desktop: "configuring remote session" closes without error

    - by icelava
    I have a desktop/laptop pair at home operating x64 Windows 7 (the desktop was upgraded from Windows Vista, works just fine). I remote desktop to them on a daily basis when outside. In recent weeks, I would occasionally fail to connect to my desktop. It can connect and authenticate fine, but the "configuring remote session" dialog would simply close and not show me the desktop window or any error message. There is no error event log relating to this on the desktop computer. Some suggestions call for disabling remote audio, which mine already is, but trying different audio modes did not yield any different result. I am not too sure if this is related to video card drivers (they do get auto-updated), since remote desktop video is supposed to steer via a virtual device driver? Nonetheless the desktop operates three monitors via an ATI Radeon HD5770 (1 Displayport, 2 DVI). I do not see a real problem with that since I can mostly connect and operate it remotely. I try to "remote tunnel" via my home laptop but obviously won't work either as the problem lies in the desktop. What other conditions can cause remote desktop to break without error? UPDATE I came home and still couldn't connect to the desktop until I restarted the entire system.

    Read the article

  • Stop the constant random reboots of my GIGABYTE GA-B75M-D3V

    - by Frederic
    I've got some issues with a new system. It's rebooting constantly. The system consists of a: brand new: Gigabyte GA-B75M-D3V with F9 BIOS (latest) Intel Core i5-3470 Ivy Bridge 2x 8GB G.SKILL Ripjaws 1600MHz memory (mem-tested x-86) coming from a stable system: Creative Soundcard X-FI Titanium Asus Radeon HD4850 OCZ Vertex 3 120G SSD Sata 3 Hard disk 1TB Sata 2 ASUS Blu-ray Drive PSU 400w Connected peripherals : Toshiba tv (displayport on dvi of MB or HD4850) Wired mouse, wireless keyboard (logitech) Bluetooth usb key Azio main problem : it's not possible to read the errors from the MB. nothing on the manual neither on internet. At the beginning, I received a MB with graphic problems and the problem of rebooting. I RMA'd it. The new one doesn't have any graphic problems. but it's still constantly rebooting. I removed everything except the HD, the sound-card, the blu-ray drive and the wireless keyboard. It's still unexpectdly rebooting. I'm running a test with just the motherboard and the HD. I will update this text after the test. I've got some questions : Somebody have an idea of a test? The PSU could cause that problem? I used it a lot of years with the stable system. Update 1: BTW, if anyone has the same problem, the manual won't say it but you'll need to reset the bios between two tests (the screwdriver on the two pins) if you suspect a problem of compatibility .

    Read the article

  • Games, Windows 8.1 and 144Hz display

    - by Marioysikax
    So I have been having problems with few games after switching from 7 to 8.1, which seems to be related to my 144Hz monitor. Few examples: Shank, Shank 2, Blood of the Werewolf, Astebreed, the Sims 2 and Rayman Legends patch 1.2Had few other as well but it's been long and I have 600+ steam library. From those games at least the Sims 2 and Shank worked without any problems with same setup and Windows 7. So basically these games simply refuse to launch with basic setup. However if I plug 60Hz TV with HDMI instead everything magically starts to work. As for Astebreed and the Sims 2 using windowed mode seems to also work. As for Rayman Demo and version 1.0 works for some reason and 1.2 breaks settings menu. I have already tried contacting supports. EA support stated game simply shouldn't work with 8.1 at all (which is lie as it works with that TV and friend with 8 plays just fine), ubisoft support took few weeks and support said he will forward info for further processing, blood of the werewolf support had no idea what's going on and told me to just use my TV instead.Changing monitors refresh rate to 120Hz or forcing it to 60Hz doesn't do anything. I have DVI right now but I will try with DisplayPort when I get the cable. At PCGW Garrett said it may have something to do how listing resolutions work with 8 compared to earlier Windows versions but my googling skills don't bring anything up and compatibility mode for earlier windows version doesn't work either (not that I expected that to work). My system specs are on my steam profile. How do I get those work with my 144Hz monitor as well as possible future games having same problem? Downgrading to 7 would work but is far from practical and I don't own legit lisence for that one.

    Read the article

  • Magical moving desktop icons

    - by Nathan Taylor
    I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

    Read the article

  • What switch should we use for PCoIP?

    - by Jay R.
    We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

    Read the article

  • Can no longer duplicate display to external monitor on Windows 7

    - by rbeier
    We have a large TV at work - I connect my laptop to it to share my screen during meetings. Until today, my laptop display has been duplicating to the TV automatically when I connect the TV cable to the laptop. The display resolution would decrease automatically to be compatible with the TV. Today, however, it's stopped working. When I connect the cable to the TV, the display extends rather than duplicating. Using the Win+P key combination (or Fn+F7 on my Lenovo laptop), I can choose to duplicate the display - but when I do this, it ends up only displaying on the laptop. I can get it to display on the TV by hitting Win+P and choosing "projector only", but then I can't see what I'm doing on the laptop screen. I have a Lenovo W520 laptop running Windows 7, connected to the TV using a DisplayPort-to-HDMI converter cable. The TV's native resolution is 1280x720; the laptop's native resolution is 1600x900. I've tried booting with the TV cable already connected; I've tried manually lowering the display resolution on the laptop to 1280x720 before duplicating the display. Neither works. Does anyone have any other suggestions?

    Read the article

  • Display on secondary video card (Nvidia 8400 GS): horrible refresh, bogs system

    - by minameismud
    This is my work computer, but it's a small shop. We do business software development. The most hardcore thing we create is some web animations with html5 and fancy javascript/css. The base machine is a Dell Precision T3500 - Xeon W3550 (3.07GHz quad), 6GB ram, pair of 500GB harddrives, and Win 7 x64 Enterprise SP1. My primary video card is an ATI FirePro V4800 1GB in a PCIe slot of some speed driving a pair of 23s at 1920x1080 through DisplayPort-HDMI adapters. The secondary card is an NVidia GeForce 8400GS in a PCI slot driving a single 17" at 1280x1024 through DVI. On either of the 23" monitors, windows move smoothly, scroll quickly, and are generally very responsive. On the 17", it's slow, chunky, and when I'm trying to scroll a ton of content, Windows will occasionally suggest I drop to the Windows Basic theme. I've updated drivers for both cards, and I've gotten every Windows update relating to video. Specifically: ATI FirePro Provider: Advanced Micro Devices, Inc Date: 6/22/2014 Version: 13.352.1014.0 NVidia 8400 GS Provider: NVIDIA Date: 7/2/2014 Version: 9.18.13.4052 Unfortunately, new hardware isn't really an option. Is there anything I can do software-wise to speed up the NVidia-driven monitor?

    Read the article

  • Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

    - by terdon
    I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

    Read the article

< Previous Page | 1 2 3 4