Search Results

Search found 249 results on 10 pages for 'dmz'.

Page 4/10 | < Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >

• Relay WCF Service

  - by Matt Ruwe

  This is more of an architectural and security question than anything else. I'm trying to determine if a suggested architecture is necessary. Let me explain my configuration. We have a standard DMZ established that essentially has two firewalls. One that's external facing and the other that connects to the internal LAN. The following describes where each application tier is currently running. Outside the firewall: Silverlight Application In the DMZ: WCF Service (Business Logic & Data Access Layer) Inside the LAN: Database I'm receiving input that the architecture is not correct. Specifically, it has been suggested that because "a web server is easily hacked" that we should place a relay server inside the DMZ that communicates with another WCF service inside the LAN which will then communicate with the database. The external firewall is currently configured to only allow port 443 (https) to the WCF service. The internal firewall is configured to allow SQL connections from the WCF service in the DMZ. Ignoring the obvious performance implications, I don't see the security benefit either. I'm going to reserve my judgement of this suggestion to avoid polluting the answers with my bias. Any input is appreciated. Thanks, Matt

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• Physical hardware required to enable AD LDS service, can it be placed as a stand alone server on the

  - by rajeevrautela

  Hi, If I want to implement AD LDS for a single application, does it require Physical hardware or it can be installed/enabled on web server or application server. As usually the web and app servers are placed in DMZ if the above option is not feasible can we put standalone AD LDS server n DMZ.

  Read the article

• Opening cursor files in a graphics editor?

  - by sdaau

  I'm looking at /usr/share/icons/DMZ-White/cursors, and there is: $ tree -s /usr/share/icons/DMZ-White/ /usr/share/icons/DMZ-White/ +-- [ 4096] cursors ¦   +-- [ 14] 00008160000006810000408080010102 -> v_double_arrow ... ¦   +-- [ 5] 9d800788f1b08800ae810202380a0822 -> hand2 ¦   +-- [ 8] arrow -> left_ptr ¦   +-- [ 15776] bd_double_arrow ¦   +-- [ 15776] bottom_left_corner ¦   +-- [ 15776] bottom_right_corner ¦   +-- [ 15776] bottom_side ... ... a bunch of files without extension, that GIMP cannot open. Is there an editor where these files can be opened - or at least a converter to something like .png? I can note that ImageMagick display also failed to open these files... Found also Gursor Maker - Cursor Editor for X11/GTK+; got the CVS code from SourceForge - it still uses Numeric (the old name of numpy), so to run it, you'll have to do: #from Numeric import * from numpy import * ... in xcurio.py, curxp.py, gimp.py, colorfunc.py - and comment the #from xml.dom.ext.reader import Sax2 in lsproj.py. With that, I got it running 11.04: ... but cannot get any files to open? So I thought I should grep for paths, nothing much came up - and when I looked into cursordefs.py, I simply had to paste this: CURSOR_ICON = gtk.gdk.pixbuf_new_from_xpm_data([ "10 16 3 1", " c None", ". c #000000", "+ c #FFFFFF", ".. ", ".+. ", ".++. ", ".+++. ", ".++++. ", ".+++++. ", ".++++++. ", ".+++++++. ", ".++++++++.", ".+++++....", ".++.++. ", ".+. .++. ", ".. .++. ", " .++. ", " .++. ", " .. "]) Heh :) In any case, doesn't look like it will be much usable on newer Ubuntus, unfortunately... Just tested XMC plugin as well - on 11.04, has to be built from source (from the link in the accepted answer); the requirements on my system resolved to: sudo apt-get install libgimp2.0-dev libglib2.0-0-dbg libglib2.0-0-refdbg libglib2.0-cil-dev libgtk2.0-0-dbg libgtk2.0-cil-dev ... after that, the configure/make procedure in the INSTALL file works. Note that this plugin is a bit "sneaky": ... that is, you should use "All files" (as there are no extensions); cursor previews at first will not be rendered. Then open one cursor file; after it has been opened, then there is a preview in the File/Open dialog; but other than that, it works fine...

  Read the article

• Outbound HTTP performance tuning recommendations

  - by Richard Gadsden

  I'll detail my exact setup below, but general recommendations for a better web-browsing experience will be useful. A nice checklist of things to try would be great! I have 600 users on a single site with an 8MB leased line. I get a lot of moans about the performance of "the internet" (ie web-browsing). What recommendations do the community have for speeding things up without just throwing more bandwidth at it? I expect I will end up buying some more, but good management tips are always valuable. My setup is this: Cisco PIX (515E) firewall on the edge of the network. It's just doing some basic NAT, and opening up a handful of ports to various bastion hosts (aka DMZ servers). The DMZ is just a switch that the servers are plugged into. ISA 2006 Enterprise array (two servers) connecting DMZ to the internal LAN, with WebSense Web Security filtering HTTP traffic so users can't look at porn or waste bandwidth on YouTube during working hours. I've done a few things - I've just switched my internal DNS over to use root hints, which halved DNS query latency from 500ms to 250ms. Well worth doing. I'm trying to cache more aggressively, but so much more of the internet is AJAXy and doesn't cache very well as compared to five years ago. Plus the 70GB of cache which felt like a lot a few years ago really isn't any more. I'm getting about 45% cache hits by number of requests, but only about 22% by size, ie larger objects are less likely to be cached. Latency seems to be part of the problem. Is that attributable to the bandwidth problem, or are there things I can look at to try to reduce latency even on heavily-loaded bandwidth?

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Route through site-to-site VPN not working

  - by Jonathan

  I'm trying to set up a site-to-site VPN using RRAS on two 2K8r2 servers since yesterday. The connection is working at this point, but I can't get it to send traffic from one site to the other one. Set up: the set up is the same on both sites: the server is connected to a router that's connected to a modem. The routers act like a DHCP-server and assign IP addresses from the range subnet.21-subnet-.100. Both servers use a static IP address, subnet.11, and are set up as DMZ. Configuration: the servers are configured using the wizard to set up a site-to-site connection. This works with a demand-dial interface and a PPTP VPN connection. As mentioned, the VPN connection work properly. Problem: I can't get the servers to send the traffic for the other site, to be sent through the VPN connection. I added a static route on both server (home, office 1) and I can see the result in the IP routing table (home, office 1). I did this because the route didn't show up automatically. My guess is that this last step isn't right, for example because the routing table states "non demand-dial", which seems not correct. Home: Subnet: 10.0.1.0/24 Router: 10.0.1.1 Server: 10.0.1.11 (DMZ) DHCP: 10.0.1.21-10.0.1.100 RRAS DHCP: 10.0.1.101-10.0.1.150 Office 1: Subnet: 10.0.2.0/24 Router: 10.0.2.1 Server: 10.0.2.11 (DMZ) DHCP: 10.0.2.21-10.0.2.100 RRAS DHCP: 10.0.2.101-10.0.2.150 I hope someone has an idea to get this route working!

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• How broken is routing strategy that causes a martian packet (so far only) during tracepath?

  - by lkraav

  I believe I've achieved a table that routes packets from and to eth1/192.168.3.x through 192.168.3.1, and packets from and to eth0/192.168.1.x through 192.168.1.1 (helpful source). Question: when doing tracepath from 192.168.3.20 (from within vserver), I'm getting kernel: [318535.927489] martian source 192.168.3.20 from 212.47.223.33, on dev eth0 at or near the target IP, while intermediary hops go without (log below). I don't understand why this packet is arriving on eth0, instead of eth1, even after reading this: Note that you may see packets from non-routable IP addresses when running the traceroute or tracepath commands. While packets cannot be routed to these routers, packets sent between 2 routers only need to know the address of the next hop within the local networks, which could be a non-routable address. Can someone explain that paragraph in human language? Based on short initial trials so far, everything else seems to work without causing martians. Is this contained to the nature of tracepath operation or do I have some other bigger routing problem that will cause work traffic breakage? Side note: is it possible to inspect martian packet with tcpdump or wireshark or anything of the sort? I'm have not been able to get it to show up on my own. vserver-20 / # tracepath -n 212.47.223.33 1: 192.168.3.2 0.064ms pmtu 1500 1: 192.168.3.1 1.076ms 1: 192.168.3.1 1.259ms 2: 90.191.8.2 1.908ms 3: 90.190.134.194 2.595ms 4: 194.126.123.94 2.136ms asymm 5 5: 195.250.170.22 2.266ms asymm 6 6: 212.47.201.86 2.390ms asymm 7 7: no reply 8: no reply 9: no reply ^C Host routing: $ sudo ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo 2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN link/sit 0.0.0.0 brd 0.0.0.0 3: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:24:1d:de:b3:5d brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 scope global eth0 4: eth1: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:46:46:a3:6a brd ff:ff:ff:ff:ff:ff inet 192.168.3.2/27 scope global eth1 inet 192.168.3.20/27 brd 192.168.3.31 scope global secondary eth1 # linux-vserver instance $ sudo ip route default via 192.168.1.1 dev eth0 metric 3 unreachable 127.0.0.0/8 scope host 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.2 192.168.3.0/27 dev eth1 proto kernel scope link src 192.168.3.2 $ sudo ip rule 0: from all lookup local 32764: from all to 192.168.3.0/27 lookup dmz 32765: from 192.168.3.0/27 lookup dmz 32766: from all lookup main 32767: from all lookup default $ sudo ip route show table dmz default via 192.168.3.1 dev eth1 metric 4 192.168.3.0/27 dev eth1 scope link metric 4 Gateway routing # ip route 10.24.0.2 dev tun0 proto kernel scope link src 10.24.0.1 10.24.0.0/24 via 10.24.0.2 dev tun0 192.168.3.0/24 dev br-dmz proto kernel scope link src 192.168.3.1 192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1 $ISP_NET/23 dev eth0.1 proto kernel scope link src $WAN_IP default via $ISP_GW dev eth0.1 Additional background Options for non-virtualized network interface isolation?

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• configuring two network interfaces in ubuntu 10.04.1

  - by Bill Smith

  I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

  Read the article

• How to cluster two IIS servers for failover?

  - by Ram Gopal

  We have IIS servers running in 2 machines hosting few webservices which provided some integration services to an old document Mgmt system, word/excel related service, etc.... We need to cluster/load balance these 2 IIS in order to achieve a fail-over. i.e If one of the IIS server is down, the other on should be able to handle the request. The reverse proxy used in the DMZ is also IIS 7.5 Our overall business application is in fact a J2EE one and we have successfully deployed on a weblogic cluster installed on the same two machines and load balance from the same above mentioned IIS reverse proxy at DMZ. But we do not know how to achieve this in case of IIS.

  Read the article

• AT&T U-verse 2Wire Router - Increase session table limit?

  - by caleban

  AT&T U-verse VDSL "fiber to the node" 24Mbit down / 3Mbit up 2Wire Router Model 3800HGV-B Software Version 6.1.9.24-enh.tm The 2Wire router appears to have a limit of 1024 TCP and UDP sessions. This limit appears to apply to all sessions regardless of any static IP, firewall off, DMZ plus, secondary router configurations. I've tried using the 2Wire router alone and also configuring the 2Wire static IP addressing, firewall off, DMZ plus, etc. setup along with my own pfSense router/firewall. Either way it appears I exceed the 1024 session limit and sessions start being reset. Running out of sessions isn't being caused by torrents or p2p etc. We're a business and our legitimate uses are exceeding this session limit. AT&T tells me it's not possible to bridge the router or increase or avoid the session table limit. I'm curious if anyone has found a way around either of these issues.

  Read the article

• Windows 8 Pro Remote Desktop issue

  - by Mike C.

  I have a weird issue here. I'm running Windows 8 Pro. The client computer is also running Windows 8 Pro. Remote Desktop works when I'm in the same network. I tried connecting using my external IP Address and my DynDNS account, neither works. I disabled Windows Firewall and setup DMZ for my computer on the router, still can't get remote desktop to work. I verified www.canyouseeme.org, port 3389 is open, which is obvious since I'm running DMZ! My ISP, Bell Canada (modem/router: Sagemcom F@st 2864), blocks port 80 and 25, but I don't need those for RDP, do I? The funny thing is RDP rejects the connection instantaneously for my IP or DynDNS while it takes a while for another address. Thank you, Michael

  Read the article

• Cisco Pix does not let traffic pass from outside to inside even though ACL permits

  - by Rickard

  I have tried to make my pix 515 allow traffic from outisde interface to inside, but despite permitting ACL's, it doesn't seem to let traffic through. (It is letting traffic out as it should though) I am have tried both of the following: access-list acl_in extended permit tcp any host 10.131.73.2 eq www and access-list acl_in extended permit ip any any None of them help, but I can access 10.131.73.2 from any host on the inside network. This is a one single host on the inside that should every now and then have an HTTP server running for development purpouses, so it doesn't need to reside on DMZ (and as far as I know, I can't place it on DMZ either as it's in the same subnet as the other ip's I have. Could I have missed anything? I am using PIX Version 8.0(4) My current running config looks like this: http://pastebin.com/TvRFyDrF Hope someone can help me get this working.

  Read the article

• Not able to connect to perforce server outside of localhost

  - by bobber205

  My setup is a Qwest PK5000 router with a Linksys router running Tomato. I have DMZ pointed towards my router. (The server is on the tomato router). I tried my applications that open up sockets and Utorrent (port 6883) and I ended having to do advanced port forwarding and forward specific ports in addition to having DMZ on my router. The problem is that I cannot connect to perforce when on another machine on the LAN or off. Any ideas? :) Thanks!

  Read the article

• Exposing Exchange 2010 OWA via Cisco ASA 5520

  - by Gir

  Has anyone experience with exposing the web access (OWA) of an Exchange 2010 server through a Cisco ASA (my goal is to something like a DMZ)? If so could you give me some advice? I know that Exchange doesn't support DMZ and that MS recommends using TMG. Still, I'd like to know if someone has managed this (I've tried and wasn't very successsful so far). Or would it be better to ditch (read: sell) the ASA and use a TMG server instead? We're completely on Windows Server 2008 R2 and some remaining 2003 server running mostly as file servers. We don't use the VPN features much at the moment but plan on doing that in the future, but OWA should be there if VPN is not possible from outside. Thank you very much!

  Read the article

• Torrent, ISA Server 2006 and packet dropped due to TCP_NOT_SYNC

  - by Pascal

  Hi, I'm trying to get uTorrent 2.0.4 to work in a DMZ machine, protected by a ISA Server 2006. I've opened 1 inbound port (via publishing) and opened all the higher ports for that specific machine that runs uTorrent on my DMZ, and it's working almost fine. The problem is that I keep getting packets dropped with 0xc0040017 FWX_E_TCP_NOT_SYN_PACKET_DROPPED. Is there any way to disable this via registry? Is there any way around this? The download speed fluctuates a lot, and when I starts hitting the upper limit that I've defined in uTorrent, the errors start poping up a lot, and the download speed goes way down, and the process repeats on and on Tks Edit My outbound rules are: Port Range: TCP 10000-65535 Outbound Port Range: UDP 10000-65535 Send Edit It's probably a bug handling requests from Windows 7. When I installed the uTorrent on a XP machine, the problem went away

  Read the article

• Easy shorewall question : allow ips to DNAT

  - by llazzaro

  Hello, At my home network I had a transparent proxy. This is the rule that forward all 80 traffic to my squid3.1 server at DMZ DNAT loc:!10.0.0.126 dmz:172.16.0.198:3128 tcp 80 - !172.16.0.198 Ok, I need to add more ips to avoid transparent proxy. I tried loc:!10.0.0.134,!10.0.0.126...but didnt work (also similars like [ip0,ip1]. I tried to google the answer cant find it (sorry no matches, not searching the right keywords) also I tried to read the docs, but they are really long (and indexes dont help me). Thanks!

  Read the article

• Do I really need twho different Exchange servers 2007|2010?

  - by lrosa

  Given am Exchange Server 2003 running on a dedicated server on a LAN protected by a Linux in DMZ, Microsoft says that if you upgrade, you should install two different servers (meaning two boxes, two licenses of Windows Server and two installations of Exchange) with different Exchange "server role". Exchange is installed in a safe LAN, there is a Linux relay in DMZ that feeds messages to Exchanges and gets from it the messaged to be delivered on the Net (smart relay). The mail traffic is about 2000 Internet messages/day and probably another 2000 msg/day sent by local users within the organization. The servers hosts 200 users.

  Read the article

• reverse proxy only from one internal server

  - by hrost

  I have configured a reverse proxy and is working ok for one internal server, for example our mail server. Now, I like to know if it is possible to configure a reverse proxy for only one server /application (in this case our web intranet). Our problem is Intranet call another aplication inside same intranet server and another internal servers, and the only way that I know to publish this resources is make a reverse proxy in our dmz apache for all apllications servers, but I like that from our DMZ reverse apache only intranet will be called, and other applications will be called by intranet server, and not reverse proxy. I like to configure with this system for security reason, and only allow external access to one server. I have configured With Debian Squeeze and apache 2.2 It is possible? How?

  Read the article

• Delete recursive directorys with FTP command on Bash

  - by Fake4d

  I have a problem with my infrastructure here. I am in a closed DMZ and have to access a FTP-Server in another DMZ from a headless Suse Linux 10.1. So i think i only got the ftp command.. But i have to delete a directory with about 100 subdirectorys and endless files in it.. When I type del directory it returns "Its not empty" and so i have to delete each sub directory and file manually. Oh please tell me a way how i can do this automatically :)

  Read the article

• Two routers on the same network

  - by qroberts

  My ISP has supplied me with a modem/router all in one and it isn't very good. It loses its settings and dies frequently. So I have another router in my apartment (Linksys wrt310n) that is connected to the modem via LAN-LAN port connections. I want to give my Linksys router the DHCP role and also have the ISP modem DMZ everything to the Linksys router. I want to be able to have all computers connected to both routers on the same network as well. I have been able to make it so that the Linksys has a DMZ to it from the ISP modem, but ISP modem LAN port - Linksys WAN port, so they were on different networks. Is there a way to have it so that both of them are on the same network but the Linksys router handles DHCP and port forwarding?

  Read the article

• Proxying/Tunneling IPSec traffic via netcat or SOCKS?

  - by MattC

  I have a client that is using a SonicWall router as their VPN concentrator. I downloaded the client software and set up the router as a peer. My issue is that my company uses a dual DMZ setup, meaning we have an interior firewall, then a bunch of DMZ servers, then an external firewall, then finally the telco router. In this setup, the interior firewall has no way to communicate with the exterior firewall since they are on two totally separate subnets. The communication occurs through the servers that straddle the networks. In this case, I need some way to forward the ISAKMP/IPSec traffic from my desktop out to the Internet. My usual trick of using netcat on the intermediate proxy server doesn't work here since it's not TCP/UDP traffic as far as I can tell. All of my previous experience with VPN's have been using SSL-based VPN's which are clearly very easily proxy-able. Any help would be appreciated, thanks!

  Read the article

• Need an FTP Client to run on a server and allow scheduling and not need a login to run

  - by William Todd Salzman

  I am looking at FTP clients to transfer from an external FTP Server. I need to place this FTP client on a server in the DMZ that will not be routinely logged in, so the client needs to run as a service or something like that? I need the client to be able to retrieve files from the server on a schedule (Tuesday Mornings) and drop them in a local directory for pickup by another process. I would also like the solution to be capable of performing sftp transfers. Most marketing material is geared towards the person who will be running this on their desktop, not on a server, so several of my points are never in the product specs. update DMZ can run either Windows versions or Linux versions * end update *

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >