Search Results

Search found 711 results on 29 pages for 'exercise'.

Page 4/29 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Make seems to think a prerequisite is an intermediate file, removes it

  - by James

  For starters, this exercise in GNU make was admittedly just that: an exercise rather than a practicality, since a simple bash script would have sufficed. However, it brought up interesting behavior I don't quite understand. I've written a seemingly simple Makefile to handle generation of SSL key/cert pairs as necessary for MySQL. My goal was for make <name> to result in <name>-key.pem, <name>-cert.pem, and any other necessary files (specifically, the CA pair if any of it is missing or needs updating, which leads into another interesting follow-up exercise of handling reverse deps to reissue any certs that had been signed by a missing/updated CA cert). After executing all rules as expected, make seems to be too aggressive at identifying intermediate files for removal; it removes a file I thought would be "safe" since it should have been generated as a prereq to the main rule I'm invoking. (Humbly translated, I likely have misinterpreted make's documented behavior to suit my expectation, but don't understand how. ;-) Edited (thanks, Chris!) Adding %-cert.pem to .PRECIOUS does, of course, prevent the deletion. (I had been using the wrong syntax.) Makefile: OPENSSL = /usr/bin/openssl # Corrected, thanks Chris! .PHONY: clean default: ca clean: rm -I *.pem %: %-key.pem %-cert.pem @# Placeholder (to make this implicit create a rule and not cancel one) Makefile: @# Prevent the catch-all from matching Makefile ca-cert.pem: ca-key.pem $(OPENSSL) req -new -x509 -nodes -days 1000 -key ca-key.pem $@ %-key.pem: $(OPENSSL) genrsa 2048 $@ %-cert.pem: %-csr.pem ca-cert.pem ca-key.pem $(OPENSSL) x509 -req -in $ $@ Output: $ make host1 /usr/bin/openssl genrsa 2048 ca-key.pem /usr/bin/openssl req -new -x509 -nodes -days 1000 -key ca-key.pem ca-cert.pem /usr/bin/openssl genrsa 2048 host1-key.pem /usr/bin/openssl req -new -days 1000 -nodes -key host1-key.pem host1-csr.pem /usr/bin/openssl x509 -req -in host1-csr.pem -days 1000 -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 host1-cert.pem rm host1-csr.pem host1-cert.pem This is driving me crazy, and I'll happily try any suggestions and post results. If I'm just totally noobing out on this one, feel free to jibe away. You can't possibly hurt my feelings. :)

  Read the article

• Adding a Taxonomy Filter to a Custom Post Type

  - by ken

  There is an amazing conversation from about two years ago on the Wordpress Answer site where a number of people came up with good solutions for adding a taxonomy filter to the admin screen for your custom post types (see URL for screen I'm referring to): http://[yoursite.com]/wp-admin/edit.php?s&post_status=all&post_type=[post-type] Anyway, I loved Michael's awesome contribution but in the end used Somatic's implementation with the hierarchy option from Manny. I wrapped it in a class - cuz that's how I like to do things -- and it ALMOST works. The dropdown appears but the values in the dropdown are all looking in the $_GET property for the taxonomies slug-name that you are filtering by. For some reason I don't get anything. I looked at the HTML of the dropdown and it appears ok to me. Here's a quick screen shot for some context: You can tell from this that my post-type is called "exercise" and that the Taxonomy I'm trying to use as a filter is "actions". Here then is the HTML surrounding the dropdown list: <select name="actions" id="actions" class="postform"> <option value="">Show all Actions</option> <option value="ate-dinner">Ate dinner(1)</option> <option value="went-running">Went running(1)</option> </select> I have also confirmed that all of the form elements are within the part of the DOM. And yet if I choose "Went running" and click on the filter button the URL query string comes back without ANY reference to what i've picked. More explicitly, the page first loads with the following URL: /wp-admin/edit.php?post_type=exercise and after pressing the filter button while having picked "Went Running" as an option from the actions filter: /wp-admin/edit.php?s&post_status=all&post_type=exercise&action=-1&m=0&actions&paged=1&mode=list&action2=-1 actually you can see a reference to an "actions" variable but it's set to nothing and as I now look in detail it appears that the moment I hit "filter" on the page it resets the filter dropdown to the default "Show All Actions". Can anyone help me with this?

  Read the article

• Using an objects date (without time) for a table header instead of an objects date and time (iphone)

  - by billywilliamton

  I've been working on an iphone project and have run into an issue. Currently In the table view where it displays all the objects, I use headers based on the objects datePerformed field. The only problem is that my code apparently creates a header that contains both the date and time resulting in objects not being grouped solely by their date as I intended, but rather based on their date and time. I'm not sure if it matters, but when an object is created I use a date picker to pick the date, but not the time. I was wondering if anyone could give me any suggestions or advice. Here is the code where i set up the fetchedResultsController - (NSFetchedResultsController *)fetchedResultsController { if (fetchedResultsController != nil) { return fetchedResultsController; } // Create and configure a fetch request with the Exercise entity. NSFetchRequest *fetchRequest = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Exercise" inManagedObjectContext:managedObjectContext]; [fetchRequest setEntity:entity]; // Create the sort descriptors array using date and name NSSortDescriptor *dateDescriptor = [[NSSortDescriptor alloc] initWithKey:@"datePerformed" ascending:NO]; NSSortDescriptor *nameDescriptor = [[NSSortDescriptor alloc] initWithKey:@"name" ascending:YES]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:dateDescriptor, nameDescriptor, nil]; [fetchRequest setSortDescriptors:sortDescriptors]; // Create and initialize the fetch results controller NSFetchedResultsController *aFetchedResultsController = [[NSFetchedResultsController alloc] initWithFetchRequest:fetchRequest managedObjectContext:managedObjectContext sectionNameKeyPath:@"datePerformed" cacheName:@"Root"]; self.fetchedResultsController = aFetchedResultsController; fetchedResultsController.delegate = self; // Memory management calls [aFetchedResultsController release]; [fetchRequest release]; [dateDescriptor release]; [nameDescriptor release]; [sortDescriptors release]; return fetchedResultsController; } Here's where I set up the table header properties - (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { // Display the exercise' date as section headings. return [[[fetchedResultsController sections] objectAtIndex:section] name]; } Any suggestions welcome. Thanks for your time. -Billy Williamton

  Read the article

• Consuming Hello World pagelet in WebCenter Spaces

  - by astemkov

  Introduction The goal of this exercise is to show you how can you use Hello World pagelet that you just created from your web space. Assumptions Let's assume the following: Pagelet Producer is running on http://pageletserver.company.com:8889/pagelets/ WebCenter is running on http://webcenter.company.com:8888/webcenter/ You created Hello_World pagelet as described here. For our exercise we will need a space created. So let's login into WebCenter Portal and create a space called "myspace" using "Portal Site" template: Registering Pagelet Producer with WebCenter portal In order to use our newly created pagelet from WebCenter Spaces, we first need to register Pagelet Producer: Click "Administraion" link on WebCenter toolbar Open the "Configuration" tab Click on "Services" link on the upper-left corner of the page Click on "Portlet Producers" link on the right hand pane of the screen Click on "Register" button Select "Pagelet Producer" radio button and type Producer Name = "MyPageletProducer" Server URL = http://pageletserver.company.com:8889/pagelets/ Click "Test" button If everything is succesful you will see the following screen: Now click "OK'. Pagelet producer is registered: Inserting Hello World pagelet to WebCenter Space Now let's insert Hello World pagelet into "myspace" page: Let's go back to "myspace", click on the icon in a upper-right corner of the page and select "Edit Page" Click on one of the "Add Content" buttons: Select "Mash-Ups": Select "Pagelet Producers: You will see the MyPageletProducer that we just registered: Click on it. You will see the library "MyLib" that contains our "Hello_World" pagelet. Click on "MyLib" and you will see "Hello_World" pagelet. Click on "Add" button, and then "Close" button. Click "Save" button, and then "Close". Now we see that our "Hello World" pagelet is inserted into "myspace" page:

  Read the article

• IIS7 URL Rewrite for URL with &rsquo;

  - by blizz

  I'm trying to redirect the following URL in IIS7 using the URL Rewrite module: Category/Cat-3/Objectives-of-Pre-Maintenance/WHAT&rsquo;S-THE-STORY-ON-LOW-CARB-DIETS-AND-EXERCISE-.aspx but for the life of me I can not get it. I tried replacing the &rsquo; with an actual single quote, and that worked fine! But for the purpose of this redirect, I need the HTML code for the quote, and not the quote itself. Here is the rule from web config: <rule name="Redirect" patternSyntax="ECMAScript" stopProcessing="true"> <match url="^Category/Cat-3/Objectives-of-Pre-Maintenance/WHAT&amp;rsquo;S-THE-STORY-ON-LOW-CARB-DIETS-AND-EXERCISE-\.aspx" /> <conditions> <add input="{HTTP_HOST}" pattern="www.example.com" /> </conditions> <action type="Redirect" url="http://www.example.com/redirecturl/" appendQueryString="false" /> </rule> Any ideas would be very helpful! Thanks

  Read the article

• single for-loop runtime explanation problem

  - by owwyess

  I am analyzing some running times of different for-loops, and as I'm getting more knowledge, I'm curious to understand this problem which I have still yet to find out. I have this exercise called "How many stars are printed": for (int i = N; i > 1; i = i/2) System.out.println("*"); The answers to pick from is A: ~log N B: ~N C: ~N log N D: ~0.5N^2 So the answer should be A and I agree to that, but on the other side.. Let's say N = 500 what would Log N then be? It would be 2.7. So what if we say that N=500 on our exercise above? That would most definitely print more han 2.7 stars? How is that related? Because it makes sense to say that if the for-loop looked like this: for (int i = 0; i < N; i++) it would print N stars. I hope to find an explanation for this here, maybe I'm interpreting all these things wrong and thinking about it in a bad way. Thanks in advance.

  Read the article

• Is this kind of Design by Contract useless?

  - by Charlie Pigarelli

  I've just started informatics university and I'm attending a programming course about C(++). The programming professor prefers to teach very few things (in 3 month we have just reached the functions topic) and connect every topic with a type of programming design that somehow is similar to the Design by Contract design. Basically what he ask us to do is to write every exercise with comments Pre-conditions, Post-conditions and Invariants that should prove the correctness of each program we write. But this doesn't make any sense to me. I mean, ok: maybe writing down your thoughts prevent you from doing some mistakes, but if this is all an abstract thing, then if your program intuition is wrong you'll write your program wrong and then you'll also write pre and post conditions wrong probably auto convincing your self about its correctness. Most of the time, both me and other students have written programs that seemed ok and that had correct pre and post condition too. But at the moment of testing it was just completely wrong. I had some experience before this course of programming and I had written a lot of line of code before and I found myself comfortably with just writing a program and unit test it. It take less time to accomplish and is less "abstract" than just thinking about what every single piece of your program should do in every case (which is kinda like mentally testing it). Finally, all this pre and post conditions takes me like 80% of the total time of the exercise. It's harder to think about putting down this pre and post correct than to write the program itself. Since we are like the only course of the only university probably in the entire world that makes this things, could someone please tell me how should I manage this thing? Am I right thinking that this doesn't worth anything? Should I change university? (there are like double of the people attending that course and it seems that usually very few people passes the exam the first year). Should I convince myself it's method is right?

  Read the article

• Tuning B2B Server Engine Threads in SOA Suite 11g

  - by Shub Lahiri, A-Team

  Background B2B 11g has a number of parameters that can be tweaked to tune the engine for handling high volumes of messages. These parameters are also known as B2B server properties and managed via the EM console.  This note highlights one aspect of the tuning exercise and describes the different threads, that can be configured to tune the performance of a B2B server. Symptoms The most common indicator of a B2B engine in need of a tuning is reflected in the constant build-up of messages in an internal JMS queue within the B2B server. It is called B2B_EVENT_QUEUE and can be monitored via the Weblogic server console. Whenever such a behaviour is seen, it usually results in general degradation of performance. Remedy There could be many contributing factors behind a B2B server's degradation of performance. However, one of the first places to tune the server from the out-of-the-box, default configuration is to change the number of internal engine threads allocated within the B2B server. Usually the default configuration for the B2B server engine threads is not suitable for high-volume of messaging loads. So, it is necessary to increase the counts for 3 types of such threads, by specifying the appropriate B2B server properties via the EM console, namely, Inbound - b2b.inboundThreadCount Outbound - b2b.outboundThreadCount Default - b2b.defaultThreadCount The function of these threads are fairly self-explanatory. In other words, the inbound threads process the inbound messages that are coming into the B2B server from an external endpoint. Similarly, the outbound threads processes the messages that are sent out from the B2B server. The default threads are responsible for certain B2B server-specific special tasks. In case the inbound and outbound thread counts are not specified, the default thread count also dictates the total number of inbound and outbound threads. As found in any tuning exercise, the optimisation of these threads is usually reached via an iterative process. The best working combination of the thread counts are directly related to the system infrastructure, traffic load and several other environmental factors.

  Read the article

• Oracle 10g to SQL server 2008/ migration

  - by vs1984

  We have a reasonably heavy Oracle 10G database (~ 120 GB space occupied). The database consists of tables, packages, materialized views, procedures etc. We are planning to decommission Oracle and migrate to SQL server 2008. Can you provide your experience on this similar exercise? What is the best approach to undertake this exercise? Are there any tools available with Microsoft to implement this? Once SQL server is commissioned, is it possible to connect SQL server to Oracle server in downstream applications?

  Read the article

• Minimum Requirements for (open) Solaris?

  - by Electrons_Ahoy

  I'm thinking about knocking together a Solaris box at home to act as a combination server and learning exercise. What are the minimum hardware specs I can throw at it such that it'll be actually usable? I'd be cobbling the machine together from a stack of various x86 PC spares/leftovers. Does anyone have experience with Solaris at the lower end of the spectrum? The Sun site, for example, claims it'll run with as little as 255 megs of ram, but is it worth the exercise with less than a gig? Will my old Pentium II 450 cut the mustard? (I'm willing to throw a couple of bucks at pricewatch/mwave/newegg on this, but if I need to build a better rig than my main PC, I may not bother.)

  Read the article

• Iterative and Incremental Principle Series 5: Conclusion

  - by llowitz

  Thank you for joining me in the final segment in the Iterative and Incremental series.  During yesterday’s segment, I discussed Iteration Planning, and specifically how I planned my daily exercise (iteration) each morning by assessing multiple factors, while following my overall Implementation plan. As I mentioned in yesterday’s blog, regardless of the type of exercise or how many increment sets I decide to complete each day, I apply the 6 minute interval sets and a timebox approach.  When the 6 minutes are up, I stop the interval, even if I have more to give, saving the extra energy to apply to my next interval set.   Timeboxes are used to manage iterations.  Once the pre-determined iteration duration is reached – whether it is 2 weeks or 6 weeks or somewhere in between-- the iteration is complete.  Iteration group items (requirements) not fully addressed, in relation to the iteration goal, are addressed in the next iteration.  This approach helps eliminate the “rolling deadline” and better allows the project manager to assess the project progress earlier and more frequently than in traditional approaches. Not only do smaller, more frequent milestones allow project managers to better assess potential schedule risks and slips, but process improvement is encouraged.  Even in my simple example, I learned, after a few interval sets, not to sprint uphill!  Now I plan my route more efficiently to ensure that I sprint on a level surface to reduce of the risk of not completing my increment.  Project managers have often told me that they used an iterative and incremental approach long before OUM.   An effective project manager naturally organizes project work consistent with this principle, but a key benefit of OUM is that it formalizes this approach so it happens by design rather than by chance.    I hope this series has encouraged you to think about additional ways you can incorporate the iterative and incremental principle into your daily and project life.  I further hope that you will share your thoughts and experiences with the rest of us.

  Read the article

• Agile Testing Days 2012 – My First Conference!

  - by Chris George

  I’d like to give you a bit of background first… so please bear with me! In 1996, whilst studying for my final year of my degree, I applied for a job as a C++ Developer at a small software house in Hertfordshire  After bodging up the technical part of the interview I didn’t get the job, but was offered a position as a QA Engineer instead. The role sounded intriguing and the pay was pretty good so in the absence of anything else I took it. Here began my career in the world of software testing! Back then, testing/QA was often an afterthought, something that was bolted on to the development process and very much a second class citizen. Test automation was rare, and tools were basic or non-existent! The internet was just starting to take off, and whilst there might have been testing communities and resources, we were certainly not exposed to any of them. After 8 years I moved to another small company, and again didn’t find myself exposed to any of the changes that were happening in the industry. It wasn’t until I joined Red Gate in 2008 that my view of testing and software development as a whole started to expand. But it took a further 4 years for my view of testing to be totally blown open, and so the story really begins… In May 2012 I was fortunate to land the role of Head of Test Engineering. Soon after, I received an email with details for the “Agile Testi However, in my new role, I decided that it was time to bite the bullet and at least go to one conference. Perhaps I could get some new ideas to supplement and support some of the ideas I already had.ng Days” conference in Potsdam, Germany. I looked over the suggested programme and some of the talks peeked my interest. For numerous reasons I’d shied away from attending conferences in the past, one of the main ones being that I didn’t see much benefit in attending loads of talks when I could just read about stuff like that on the internet. So, on the 18th November 2012, myself and three other Red Gaters boarded a plane at Heathrow bound for Potsdam, Germany to attend Agile Testing Days 2012. Tutorial Day – “Software Testing Reloaded” We chose to do the tutorials on the 19th, I chose the one titled “Software Testing Reloaded – So you wanna actually DO something? We’ve got just the workshop for you. Now with even less powerpoint!”. With such a concise and serious title I just had to see what it was about! I nervously entered the room to be greeted by tables, chairs etc all over the place, not set out and frankly in one hell of a mess! There were a few people in there playing a game with dice. Okaaaay… this is going to be a long day! Actually the dice game was an exercise in deduction and simplification… I found it very interesting and is certainly something I’ll be using at work as a training exercise! (I won’t explain the game here cause I don’t want to let the cat out of the bag…) The tutorial consisted of several games, exploring different aspects of testing. They were all practical yet required a fair amount of thin king. Matt Heusser and Pete Walen were running the tutorial, and presented it in a very relaxed and light-hearted manner. It was really my first experience of working in small teams with testers from very different backgrounds, and it was really enjoyable. Matt & Pete were very approachable and offered advice where required whilst still making you work for the answers! One of the tasks was to devise several strategies for testing some electronic dice. The premise was that a Vegas casino wanted to use the dice to appeal to the twenty-somethings interested in tech, but needed assurance that they were as reliable and random as traditional dice. This was a very interesting and challenging exercise that forced us to challenge various assumptions, determine/clarify requirements but most of all it was frustrating because the dice made a very very irritating beeping noise. Multiple that by at least 12 dice and I was dreaming about them all that night!! Some of the main takeaways that were brilliantly demonstrated through the games were not to make assumptions, challenge requirements, and have fun testing! The tutorial lasted the whole day, but to be honest the day went very quickly! My introduction into the conference experience started very well indeed, and I would talk to both Matt and Pete several times during the 4 days. Days 1,2 & 3 will be coming soon…  

  Read the article

• Gamification = -10#/3mo

  - by erikanollwebb

  One of the purposes of gamification of anything is to see if you can modify the behavior of the user. In the enterprise, that might mean getting sales people to enter more information into a CRM system, encouraging employees to update their HR records, motivating people to participate in forums and discussions, or process invoices more quickly.  Wikipedia defines behavior modification as "the traditional term for the use of empirically demonstrated behavior change techniques to increase or decrease the frequency of behaviors, such as altering an individual's behaviors and reactions to stimuli through positive and negative reinforcement of adaptive behavior and/or the reduction of behavior through its extinction, punishment and/or satiation."  Gamification is just a way to modify someone's behavior using game mechanics. And the magic question is always whether it works. So I thought I would present my own little experiment from the last few months.  This spring, I upgraded to a Samsung Galaxy 4.  It's a pretty sweet phone in many ways, but one of the little extras I discovered was a built in app called S Health. S Health is an app that you can use to track calories, weight, exercise and it has a built in pedometer. I looked at it when I got the phone, but assumed you had to turn it on to use it so I didn't look at it much.  But sometime in July, I realized that in fact, it just ran in the background and was quietly tracking my steps, with a goal of 10,000 per day.  10,000 steps per day is this magic number recommended by the Surgeon General and the American Heart Association.  Dr. Oz pushes it as the goal for daily exercise.  It's about 5 miles of walking. I'm generally not the kind of person who always has my phone with me.  I leave it in my purse and pull it out when I need it.  But then I realized that meant I wasn't getting a good measure of my steps.  I decided to do a little experiment, and carry it with me as much as possible for a week.  That's when I discovered the gamification that changed my life over the last 3 months.  When I hit 10,000 steps, the app jingled out a little "success!" tune and I got a badge.  I was hooked.  I started carrying my phone.  I started making sure I had shoes I could walk in with me.  I started walking at lunch time, because I realized how often I sat at my desk for 8-10 hours every day without moving.  I started pestering my husband to walk with me after work because I hadn't hit my 10,000 yet, leading him at one point to say "I'm not as much a slave to that badge as you are!"  I started looking at parking lots differently.  Can't get a space up close?  No worries, just that many steps toward my 10,000.  I even tried to see if there was a second power user level at 15,000 or 20,000 (*sadly, no).  If I was close at the end of the day, I have done laps around my house until I got my badge.  I have walked around the block one more time to get my badge.  I have mentally chastised myself when I forgot to put my phone in my pocket because I don't know how many steps I got.  The badge below I got when my boss and I were in New York City and we walked around the block of our hotel just to watch the badge pop up. There are a bunch of tools out on the market now that have similar ideas for helping you to track your exercise, make it social.  There are apps (my favorite is still Zombies, Run!).  You could buy a FitBit or UP by Jawbone.   Interactive fitness makes the Expresso stationary bike with built in video games.  All designed to help you be more aware of your activity and keep you engaged and motivated.  And the idea is to help you change your behavior. I know someone who would spend extra time and work hard on the Expresso because he had built up strategies for how to kill the most dragons while he was riding to get more points.  When the machine broke down, he didn't ride a different bike because it just wasn't that interesting. But for me, just the simple jingle and badge have been all I needed.  I admit, I still giggle gleefully when I hear the tune sing out from my pocket. After a few weeks, I noticed I had dropped a few pounds.  Not a lot, just 2-3.  But then I was really hooked.  I started making a point both to eat a little less and hit 10,000 steps as much as I could.  I bemoaned that during the floods in Boulder, I wasn't hitting my 10,000 steps.  And now, a few months later, I'm almost 10 lbs lighter. All for 1 badge a day. So yes, simple gamification can increase motivation and engagement.  And that can lead to changes in behavior.  Now the job is to apply that to the enterprise space in a meaningful and engaging way. 

  Read the article

• Too many argumants for function

  - by Stas Kurilin

  I'm starting learning Lisp with Java background. In SICP's exercise there is many tasks where students should create abstract functions with many parameters, like (define (filtered-accumulate combiner null-value term a next b filter)...) in exercise 3.11. In Java (language with safe, static typing discipline) - method with more than 4 arguments usually smells, but in Lisp/Scheme it doesnt, does it? I'm wandering how many arguments do you use in you functions? If you use it in production, do you make such many layers?

  Read the article

• writing a fast parser in python

  - by panzi

  I've written a hands-on recursive pure python parser for a some file format (ARFF) we use in one lecture. Now running my exercise submission is awfully slow. Turns out by far the most time is spent in my parser. It's consuming a lot of CPU time, the HD is not the bottleneck. I wonder what performant ways are there to write a parser in python? I'd rather not rewrite it in C. I tried to use jython, but that decreased performance a lot! The files I parse are partially huge ( 150 MB) with very long lines. My current parser only needs a look-ahead of one character. I'd post the source here but I don't know if that's such a good idea. After all the submission deadline has not jet ended. But then, the focus in this exercise is not the parser. You can choose whatever language you want to use and there already is a parser for Java.

  Read the article

• Please list here your deliberate practices in software development...

  - by JDelage

  What are your deliberate practices in relation with your work as a software developer / professional, or as a CS student? Deliberate practice are exercise and repetitions targeted specifically at an individual's weak points and meant to consistently stretch / grow someone's ability. It was described in this Anders Ericsson paper. To qualify as a deliberate practice, the exercise must satisfy the following: Is not inherently enjoyable. Is not play or paid practice. Is relevant to the skill being developed. Is not simply watching the skill being performed. Requires effort and attention from the learner. Often involves activities selected by a coach or teacher to facilitate learning. Please answer with one practice per answer. I'll seed the question with one possible answer.

  Read the article

• Implementation of a distance matrix of a binary tree that is given in the adjacency-list representation

  - by Denise Giubilei

  Given this problem I need an O(n²) implementation of this algorithm: "Let v be an arbitrary leaf in a binary tree T, and w be the only vertex connected to v. If we remove v, we are left with a smaller tree T'. The distance between v and any vertex u in T' is 1 plus the distance between w and u." This is a problem and solution of a Manber's exercise (Exercise 5.12 from U. Manber, Algorithms: A Creative Approach, Addison-Wesley (1989).). The thing is that I can't deal properly with the adjacency-list representation so that the implementation of this algorithm results in a real O(n²) complexity. Any ideas of how the implementation should be? Thanks.

  Read the article

• How would I go about writing a Linux TTY sniffer?

  - by alienate

  For educational purposes (not that anyone should care the motivations behind such an exercise) I'd like to write a program that can read/write to/from alternate tty/pty's. I've read papers (from the 1990's) but can't employ the implementation they use, on modern UNIXes. I was hoping that someone had researched into this in the past, or at least, read documentation pertaining to it, that they could provide. I also wonder if (considering the fact that Linux doesn't have STREAMs) if this exercise must be done via a loadable kernel module? I have many questions and probably a misunderstanding of some of the fundamental ideologies that allow such objectives to be put in place, could someone help? :)

  Read the article

• PHP OOP: Unique method per argument type?

  - by sunwukung

  I'm writing a little homebrew ORM (academic interest). I'm trying to adhere to the TDD concept as a training exercise, and as part of that exercise I'm writing documentation for the API as I develop the class. Case in point - I'm working on a classic "getCollection" type mapper class. I want it to be able to retrieve collections of asset X (let's say blog posts) for a specific user, and also collections based on an arbitrary array of numeric values. So - you might have a method like any one of these $User = $UserMapper->load(1); $ArticleCollection = $ArticleMapper->getCollection(range(10,20)); $ArticleCollection = $ArticleMapper->getCollection($User); $ArticleCollection = $ArticleMapper->getCollection($User->getId()); So, in writing the documentation for the getCollection method - I want to declare the @param variable in the Docblock. Is it better to have a unique method for each argument type, or is it acceptable to have a method that delegates to the correct internal method/class based on argument type?

  Read the article

• Write a recursive function in C that converts a number into a string

  - by user3501779

  I'm studying software engineering, and came across this exercise: it asks to write a recursive function in C language that receives a positive integer and an empty string, and "translates" the number into a string. Meaning that after calling the function, the string we sent would contain the number but as a string of its digits. I wrote this function, but when I tried printing the string, it did print the number I sent, but in reverse. This is the function: void strnum(int n, char *str) { if(n) { strnum(n/10, str+1); *str = n%10 + '0'; } } For example, I sent the number 123 on function call, and the output was 321 instead of 123. I also tried exchanging the two lines within the if statement, and it still does the same. I can't figure out what I did wrong. Can someone help please? NOTE: Use of while and for loop statements is not allowed for the exercise.

  Read the article

• The best algorithm enhancing alpha-beta?

  - by Risa

  I'm studying AI. My teacher gave us source code of a chess-like game and asked us to enhance it. My exercise is to improve the alpha/beta algorithm implementing in that game. The programmer already uses transposition tables, MTD(f) with alpha/beta+memory (MTD(f) is the best algorithm I know by far). So is there any better algorithm to enhance alpha-beta search or a good way to implement MTD(f) in coding a game?

  Read the article

• Building Great-Looking, Usable Apps: A two-day workshop applying Oracle’s best UX practices in ADF

  - by mvaughan

  By Misha Vaughan, Oracle Applications User ExperienceI have been with Oracle for more than 12 years. It is a company that has granted me extraordinary creative freedom to help deliver compelling experiences for customers.I am beyond proud to talk about one of the experiences we just took for a test drive. Recently, we delivered a first-of-its-kind, three-team collaboration, train-the-trainer event in Reading, U.K., on building great-looking, usable apps based on Oracle Fusion Applications -- using the ADF tool kit. A new kind of workshopKevin Li, Platform Product Director, asked the Oracle Applications User Experience VP, Jeremy Ashley, if the team had anything to help partners and customers build applications that looked like Fusion. He was receiving this request from European partners and customers.Some quick conversations ensued, and the idea for the workshop was born: We would conduct an experiment.  We would work with feedback from the key Platform Technology Solutions (PTS) trainers under Andre Pavanello, Director, Platform Technology Solutions, in Europe, Middle East, and Africa. We would partner with the ADF team lead by Grant Ronald, Director of Product Management, title> and leverage the Applications UX expertise in Ashley’s team.The goal: Create a pilot workshop that in two days would explain to an ADF developer how to leverage the next-generation user experience best-practices developed for Fusion Apps. Why? Customers who need integrations with Oracle Fusion Applications, who are looking for custom applications that need to co-exist with Fusion, or who quite simply want a next-generation design for a custom app, need their solutions to reflect the next-generation research and design.Building an event for an ADF developerThe biggest hurdle was figuring out where to start.  How far into user experience country do you take an ADF developer? How far into ADF do you need to go if you are a UX professional?After some time in the UX kitchen, the workshop recipe looked like this: Mix equal parts: Fusion user experience design principles and functional design patterns The art and science behind UX How to wireframe designs that you can build in Fusion How to translate those designs into an ADF application Ultan O’Broin, Director of Global User Experience, explaining the trouble ticket wireframe design exerciseLynn Munsinger, Senior Group Product Manager, explaining the follow-on trouble ticket ADF coding exercise For spice, add:•    Debra Lilley, Fujitsu and ACE director, showcasing some of the latest ADF design work in the new face of Fusion Applications •    Partner show-and-tell of example apps they have built with FMW and ADF that are dynamic, beautiful, and interactive.Debra Lilley, Oracle ACE Director and Fujitsu Fusion Champion on the new face of Fusion built with ADF and Fusion extensibility with composers as a window into “the possible”?The taste testThis first go-round of the workshop was aimed squarely at ADF developers and partners.  We were privileged to have participation and feedback from:•    Sten Vesterli, Scott/Tiger S. A., Denmark•    John Sim, Fishbowl Solutions, UK•    Josef Huber, Primus Delphi Group, Munich•    Thaddaus Weindl, Primus Delphi, Group , Munich•    Praveen Pillalamarri, EiS Technologies, Bangalore•    Balaji Kamepalli, EiS Technologies, Bangalore•    Plinio Arbizu, Services & Processes Solutions S. A., Mexico•    Yannick Ongena, infoMENTUM, UK•    Jakub Ciszek, infoMENTUM, UK•    Mauro Flores, infoMENTUM, UK•    Matteo Formica, infoMENTUM, UKRichard Bingham, Oracle, Mauro Flores and Matteo Formica, infoMENTUMWhy is this so exciting?  Oracle has invested heavily in the research and development of the Oracle Fusion Applications user experience. This investment has been and continues to be applied across the product lines. Now, we finally get to teach customers and partners how to take advantage of this investment for custom solutions.This event was a pilot to test-drive the content, as well as a train-the-trainer event that our EMEA colleagues will be using with partners who want to build with Fusion Apps design patterns.What did attendees think?"I liked most the science stuff, like eye-tracking, design patterns and best-practice (color, contrast),” Josef Huber said. “It was a very good introduction to UI design, and most developers and project managers are very bad in that.  So this course would be good for all developers and even project managers." Team Anonymous: John Sim, Fishbowl Solutions, Flavius Sana, Oracle, Josef Huber, infoMENTUM, Mireille Duroussaud, Oracle. Winners of the wireframing design exercise.  Sten Vesterli, of Scott/Tiger, said he attended to learn techniques he could use in his own projects. He wants to ensure that his applications better meet the needs of his users, and he said sessions during the workshop on user interface design and wireframing were most useful to him.  “Go to this event to learn the art and science of good user interfaces from people who really know how to do it,” he said.Sten Vesterli, Scott/Tiger, Angelo Santagata, Oracle Plinio Arbizu said the workshop fulfilled his goals, thanks to the recommendations given in how to design user interfaces to facilitate the adoption of applications among the final users. “The workshop combined these recommendations with an exercise that improved the technical comprehension, permitting the usage of JDeveloper to set forth our solutions,” he said. He added: “The first session that I really enjoyed was the five Fusion design principles. It was incredible to discover how these simple principles were included in an inherit manner in Fusion Applications, and I had been using many of them applying only ADF components.  Another topic that I enjoyed a lot was the eight recommendations about the visual design of UIs. The issues that were raised in that lesson are unknown to the developers and of great value to achieve an attractive presentation layer to the end users.  Participate in this workshop, and include these usability features in your projects and in this manner not only to facilitate and improve the user productivity, but also to distinguish you as a professional who takes advantage fully of the functionalities offered by Oracle technology. Praveen Pillalamarri came to the workshop to learn about the difficulties faced in UI and UX development, and how this can be resolved with the help of ADF.  He also appreciated the opportunity to talk with other individuals who came to the workshop. Pillalmarri said, “The way we looked at things in terms of work and projects were sharpened.  UI and UX design knowledge shared by you was quite interesting, especially the minute things which we ignored in the UI or UX design.” Plinio Arbizu, Services & Processes Solutions S. A., Richard Bingham, Oracle, Balaji Kamepalli, & Praveen Pillalamarri, EiS TechnologiesReady to spread the wordIn EMEA, Oracle customers and partners have access to three world-class trainers via Platform Technology Solutions: Mireille Duroussaud, Flavius Sana, and Angelo Santagata. Contact Andre Pavanello if you like to experience this workshop firsthand, or you have customers or partners who would benefit from the training.We are looking to bring the event to the U.S. in spring 2013. If you have interest in this kind of a workshop, leave a comment below. For those who want to follow the action, join the ADF Enterprise Methodology Group run by Oracle’s Chris Muir. Ask questions and continue with the conversation in this forum, or check blogs.oracle.com/usableapps for topics emerging from the workshop.

  Read the article

• Craftsmanship Tour: Day 3 &amp; 4 8th Light

  - by Liam McLennan

  Thursday morning the Illinois public transport system came through for me again. I took the Metra train north from Union Station (which was seething with inbound commuters) to Prairie Crossing (Libertyville). At Prairie Crossing I met Paul and Justin from 8th Light and then Justin drove us to the office. The 8th Light office is in an small business park, in a semi-rural area, surrounded by ponds. Upstairs there are two spacious, open areas for developers. At one end of the floor is Doug Bradbury’s walk-and-code station; a treadmill with a desk and computer so that a developer can get exercise at work. At the other end of the floor is a hammock. This irregular office furniture is indicative of the 8th Light philosophy, to pursue excellence without being limited by conventional wisdom. 8th Light have a wall covered in posters, each illustrating one person’s software craftsmanship journey. The posters are a fascinating visualisation of the similarities and differences between each of our progressions. The first thing I did Thursday morning was to create my own poster and add it to the wall. Over two days at 8th Light I did some pairing with the 8th Lighters and we shared thoughts on software development. I am not accustomed to such a progressive and enlightened environment and I found the experience inspirational. At 8th Light TDD, clean code, pairing and kaizen are deeply ingrained in the culture. Friday, during lunch, 8th Light hosted a ‘lunch and learn’ event. Paul Pagel lead us through a coding exercise using micro-pomodori. We worked in pairs, focusing on the pedagogy of pair programming and TDD. After lunch I recorded this interview with Paul Pagel and Justin Martin. We discussed 8th light, craftsmanship, apprenticeships and the limelight framework. Interview with Paul Pagel and Justin Martin My time at Didit, Obtiva and 8th Light has convinced me that I need to give up some of my independence and go back to working in a team. Craftsmen advance their skills by learning from each other, and I can’t do that working at home by myself. The challenge is finding the right team, and becoming a part of it.

  Read the article

• Asserting with JustMock

  - by mehfuzh

  In this post, i will be digging in a bit deep on Mock.Assert. This is the continuation from previous post and covers up the ways you can use assert for your mock expectations. I have used another traditional sample of Talisker that has a warehouse [Collaborator] and an order class [SUT] that will call upon the warehouse to see the stock and fill it up with items. Our sample, interface of warehouse and order looks similar to : public interface IWarehouse {     bool HasInventory(string productName, int quantity);     void Remove(string productName, int quantity); }   public class Order {     public string ProductName { get; private set; }     public int Quantity { get; private set; }     public bool IsFilled { get; private set; }       public Order(string productName, int quantity)     {         this.ProductName = productName;         this.Quantity = quantity;     }       public void Fill(IWarehouse warehouse)     {         if (warehouse.HasInventory(ProductName, Quantity))         {             warehouse.Remove(ProductName, Quantity);             IsFilled = true;         }     }   }   Our first example deals with mock object assertion [my take] / assert all scenario. This will only act on the setups that has this “MustBeCalled” flag associated. To be more specific , let first consider the following test code:    var order = new Order(TALISKER, 0);    var wareHouse = Mock.Create<IWarehouse>();      Mock.Arrange(() => wareHouse.HasInventory(Arg.Any<string>(), 0)).Returns(true).MustBeCalled();    Mock.Arrange(() => wareHouse.Remove(Arg.Any<string>(), 0)).Throws(new InvalidOperationException()).MustBeCalled();    Mock.Arrange(() => wareHouse.Remove(Arg.Any<string>(), 100)).Throws(new InvalidOperationException());      //exercise    Assert.Throws<InvalidOperationException>(() => order.Fill(wareHouse));    // it will assert first and second setup.    Mock.Assert(wareHouse); Here, we have created the order object, created the mock of IWarehouse , then I setup our HasInventory and Remove calls of IWarehouse with my expected, which is called by the order.Fill internally. Now both of these setups are marked as “MustBeCalled”. There is one additional IWarehouse.Remove that is invalid and is not marked.   On line 9 ,  as we do order.Fill , the first and second setups will be invoked internally where the third one is left  un-invoked. Here, Mock.Assert will pass successfully as  both of the required ones are called as expected. But, if we marked the third one as must then it would fail with an  proper exception. Here, we can also see that I have used the same call for two different setups, this feature is called sequential mocking and will be covered later on. Moving forward, let’s say, we don’t want this must call, when we want to do it specifically with lamda. For that let’s consider the following code: //setup - data var order = new Order(TALISKER, 50); var wareHouse = Mock.Create<IWarehouse>();   Mock.Arrange(() => wareHouse.HasInventory(TALISKER, 50)).Returns(true);   //exercise order.Fill(wareHouse);   //verify state Assert.True(order.IsFilled); //verify interaction Mock.Assert(()=> wareHouse.HasInventory(TALISKER, 50));   Here, the snippet shows a case for successful order, i haven’t used “MustBeCalled” rather i used lamda specifically to assert the call that I have made, which is more justified for the cases where we exactly know the user code will behave. But, here goes a question that how we are going assert a mock call if we don’t know what item a user code may request for. In that case, we can combine the matchers with our assert calls like we do it for arrange: //setup - data  var order = new Order(TALISKER, 50);  var wareHouse = Mock.Create<IWarehouse>();    Mock.Arrange(() => wareHouse.HasInventory(TALISKER, Arg.Matches<int>( x => x <= 50))).Returns(true);    //exercise  order.Fill(wareHouse);    //verify state  Assert.True(order.IsFilled);    //verify interaction  Mock.Assert(() => wareHouse.HasInventory(Arg.Any<string>(), Arg.Matches<int>(x => x <= 50)));   Here, i have asserted a mock call for which i don’t know the item name,  but i know that number of items that user will request is less than 50.  This kind of expression based assertion is now possible with JustMock. We can extent this sample for properties as well, which will be covered shortly [in other posts]. In addition to just simple assertion, we can also use filters to limit to times a call has occurred or if ever occurred. Like for the first test code, we have one setup that is never invoked. For such, it is always valid to use the following assert call: Mock.Assert(() => wareHouse.Remove(Arg.Any<string>(), 100), Occurs.Never()); Or ,for warehouse.HasInventory we can do the following: Mock.Assert(() => wareHouse.HasInventory(Arg.Any<string>(), 0), Occurs.Once()); Or,  to be more specific, it’s even better with: Mock.Assert(() => wareHouse.HasInventory(Arg.Any<string>(), 0), Occurs.Exactly(1));   There are other filters  that you can apply here using AtMost, AtLeast and AtLeastOnce but I left those to the readers. You can try the above sample that is provided in the examples shipped with JustMock.Please, do check it out and feel free to ping me for any issues.   Enjoy!!

  Read the article

• Keywords Optimization For Website Optimization

  Saying that you need to do website optimization sounds like saying you need to get healthy. To get healthy we do 2 things: diet management and exercise. Lets start with diet management. Keywords are like food for your WebPages. This article explains the role of keywords in website optimization.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >