Search Results

Search found 107 results on 5 pages for 'gauge'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • What determines what resolutions a laptop is willing to output over VGA?

    - by Joshua McKinnon
    I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

    Read the article

  • Internet Radio Station for University

    - by ryan
    I am trying to help my University Student Radio station rethink the setup of the way they stream music, but I have some questions regarding the use of Ubuntu to stream music. Currently, the radio station uses two windows machines: one of which is used to stream the radio station and serve the website, and the other is used by rotating djs to select songs and create playlists. The computer used by djs feeds mono into the sound card of the server and the server streams the feed online. -Ideally I would like to maintain a two-computer setup: One computer as server, and another that is used to select and play music by rotating djs. -I would like to use Ubuntu for the server. -I would like to use Windows for the other machine. -The server should be able to stream song information. First, is there a way to somehow get the song information from an analog feed? Second, what is the best streaming server for radio? I have encountered shoutcast, icecast, and darwin, but I don't know where to begin in attempting to gauge them. Finally, if anyone has any tips or pointers about small internet radio station management/ setup they would be appreciated as this is my first radio station, and I am eager to hear of past experiences.

    Read the article

  • MRTG Monitoring of Disk

    - by Antitribu
    I am trying to monitor Disk usage over SNMP using MRTG on CentOS5.2. I'm open to any suggestions as to the best way to achieve this (I would also like to do other metrics like CPU). Please don't assume I know anything about MRTG. I am using the following config: LoadMIBs: /usr/share/snmp/mibs/UCD-SNMP-MIB.txt,/usr/share/snmp/mibs/TCP-MIB.txt workdir: /var/www/html/mrtg/temp/ # # Disk Usage Monitoring # Target[servername.]: dskPercent.0&dskPercent.0:[email protected] Title[servername.]: / on servername routers.cgi*Desc[servername.]: / on servername routers.cgi*ShortDesc[servername.]: / MaxBytes[servername.]: 100 AbsMax[servername.]: 100 Options[servername.]: growright,nopercent,gauge YLegend[servername.]: used disk space ShortLegend[servername.]: % used Legend1[servername.]: usage Legend2[servername.]: usage Legend3[servername.]: peak usage Legend4[servername.]: peak usage LegendI[servername.]: usage LegendO[servername.]: usage routers.cgi*Icon[servername.]: disk-sm.gif routers.cgi*Options[servername.]: noo,nomax,noabsmax Unscaled[servername.]: dwmy I receive the errors: Unknown SNMP var dskPercent.0 at /usr/bin/mrtg line 2035 Unknown SNMP var dskPercent.0 at /usr/bin/mrtg line 2035 From forum surfing etc the suggestion is to use the fully qualified OIDs, I'd like to avoid this (for readability). So essentially I'm wondering where can I find a mib file compatible with mrtg for it's reference or a working config file.

    Read the article

  • Windows CE Chat Transcript (March 30, 2010)

    - by Bruce Eitman
    For those of you who missed the chat today, here is the raw transcript.   By raw, I mean that I copied and pasted the discussion without any edits. This is divided into two parts, the top part is the answers from the Microsoft Experts and the bottom part is the questions from the audience. Answers from Microsoft:   Karel Danihelka [MS] (Expert)[2010-3-30 12:2]: Hi everyone, my name is Karel Danihelka and I am developer in partner response team. Sing Wee [MS] (Expert)[2010-3-30 12:2]: Hi, I'm Sing Wee, part of the CoreOS/BSP Test Team. GLanger_MS (Expert)[2010-3-30 12:2]: Hi, I'm Glen Langer, program manager on the Core Team. Karel Danihelka [MS] (Expert)[2010-3-30 12:3]: Q: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals. Where should i start? A: Until you are using CPU with GHz frequency your only chance is use interrupt handler and implement all funcionality there. But it will be really tricky and may reduce system performance. If period will be near to millisecond timeframe you can use normal thread wait for event pattern. Karel Danihelka [MS] (Expert)[2010-3-30 12:5]: Q: I want to partition my NAND Flash device. One partition to use for hive ragistry and the other for the apps and data. The only way to do it is programmatically or setting some registry values ? A: It need to be set in registry - generally you need mark this partition as boot partition. Karel Danihelka [MS] (Expert)[2010-3-30 12:7]: Q: My CPU is Intel celeron M processor 1Ghz. A: In this case you can try use normal approach - in interrupt handler return SYSINTR and start thread in device driver which will spin thread waiting on event attached to this SYSINTR. Karel Danihelka [MS] (Expert)[2010-3-30 12:7]: Q: If i need to implement it using interrupt handlers, What are all the files that I should look at? A: Good quesiton - I would recommend documentation and there was BSP development book to download for free. mikehall_ms (Moderator)[2010-3-30 12:8]: Q: Hi guys, what's the formal way to report bugs back to the core team / product team? The mechanism of calling the support phone number every time is really onerous and time-consuming. Is there another mechanism? A: Using product support is the formal way to report bugs/issues - Product support can then create an issue that can be tracked. Karel Danihelka [MS] (Expert)[2010-3-30 12:9]: Q: But the operation for creating the partitions ? A: This is tricky - if you will make it autopartition & autoformat it will be created by filesystem. But generally it depends on your boot loader. mikehall_ms (Moderator)[2010-3-30 12:10]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? A: At MIX 2010 Charlie Kindel presented a session that described some of the core technologies that make up Windows Phone 7 Series, including the underlying operating system (Windows CE) and the new ISV programming model based on Silverlight and .NET - check out the Mix Online Videos to get more information. davbo-msft (Moderator)[2010-3-30 12:10]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? A: This forum is to discussed released products in the industry. Windows Mobile & Windows CE are based on the same Windows CE Kernel/system. Windows CE is focused on deliverying the OS for embedded customers in the market where Windows Mobile is focused on deliverying compelling Windows Phone platform. davbo-msft (Moderator)[2010-3-30 12:11]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? A: http://en.wikipedia.org/wiki/Windows_CE Wikipedia gives a good breakdown of the version history. Travis Hobrla [MS] (Expert)[2010-3-30 12:13]: Q: I created a OS design with KITL and kernel debugger enabled. But I am unable to connect to the target for debugging. I am getting the following error when i try to connect with the device. PB Debugger Cannot initialize the Kernel Debugger. PB Debugger Debugger could not initialize connection. PB Debugger The Kernel Debugger is waiting to connect with target. PB Debugger The Kernel Debugger has been disconnected successfully. A: One possibility is that a rogue cesvchost.exe has co-opted the debugger. I am assuming this is CE 6.0? Can you try exiting visual studio and manually killing the cesvchost.exe process from the Task Manager? davbo-msft (Moderator)[2010-3-30 12:14]: Q: Hi guys, what's the formal way to report bugs back to the core team / product team? The mechanism of calling the support phone number every time is really onerous and time-consuming. Is there another mechanism? A: For info on contacting Microsoft support refer to the support page on the Embedded website: http://msdn.microsoft.com/en-us/windowsembedded/dd897633.aspx Sing Wee [MS] (Expert)[2010-3-30 12:16]: Q: Do u mean ISR/IST implementation? How can i register an interrupt? What kind of interrupt should i register? A: A good introduction to interrupts in WinCE 6.0 can be found here (aside from the documentation on MSDN): http://download.microsoft.com/download/9/c/f/9cffaa58-4000-48d6-a4b2-5fed9e4e6410/Chapter%206%20-%20Developing%20Device%20Drivers.pdf mikehall_ms (Moderator)[2010-3-30 12:16]: Q: What will be different in Windows Compact 7 from CE 6.0? A: Unfortunately we cannot discuss unreleased products on this chat - keep an eye on the Windows Embedded web site and blogs to keep up to date with product announcements. Travis Hobrla [MS] (Expert)[2010-3-30 12:16]: Q: I am using CE 6.0. There is no cesvchost process running in my system. A: What operating system are you using? Karel Danihelka [MS] (Expert)[2010-3-30 12:16]: Q: So...I have to modify file system code to create 2 partition at system startup ?!! I haven't understood.... A: You don't need to modify code, there are registry settings to achive this (look to documentation). But you may need to create partition table in boot loader. Unfortunatelly there isn't simple way how to do it. davbo-msft (Moderator)[2010-3-30 12:18]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Windows Embedded CE 6.0 R3 includes Sliverlight for Windows Embedded. Refer to New Features overview on the embedded web site. http://www.microsoft.com/windowsembedded/en-us/products/windowsce/default.mspx. Silverlight - The power of Silverlight brought to Windows Embedded CE to create rich applications and user interfaces is new part of Windows CE Embedded. mikehall_ms (Moderator)[2010-3-30 12:20]: Q: The link for developing device drivers is not working. can u please check that? A: http://msdn.microsoft.com/en-us/library/ms923714.aspx davbo-msft (Moderator)[2010-3-30 12:20]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Sorry misunderstood the question I thought you were asking if embedded CE could handle Silverlight. Please repost so that the question goes back into the active queue because once answered no way to put the status back to open. Travis Hobrla [MS] (Expert)[2010-3-30 12:21]: Q: sorry! Windows XP SP3 A: Can you try exiting VS2005 and confirming cesvchost.exe is not running, then renaming C:\Documents and Settings\USERNAME\Local Settings\Application Data\Microsoft\CoreCon\1.0 to 1.0_backup, then restarting VS2005? Sing Wee [MS] (Expert)[2010-3-30 12:24]: Q: Can I have the book's name please? A: I believe the downloadable version is related to the last link I sent. If you go to the following website, I believe you can download the whole thing: http://msdn.microsoft.com/en-us/windowsembedded/ce/cc294468.aspx davbo-msft (Moderator)[2010-3-30 12:24]: Q: If one has an image on a Silverlight page, it seems to be cached. How would one refresh that cache after changing the underlying image? A: change the URI of the image or use a writeable bitmap if they want to manually toggle the pixels Sing Wee [MS] (Expert)[2010-3-30 12:25]: A: Whoops, hit [ENTER] too early. On the right side, you'll see there an "Exam Preparation Kit" link that can be downloaded in several different languages. Sing Wee [MS] (Expert)[2010-3-30 12:25]: Q: Can I have the book's name please? A: Whoops, hit [ENTER] too early. On the right side, you'll see there an "Exam Preparation Kit" link that can be downloaded in several different languages. Karel Danihelka [MS] (Expert)[2010-3-30 12:26]: Q: I have a NAND Flash on my target device. On this flash I have the hive registry and an application.I have observed that when the NAND flash is fully, the system startup time is longer....is there a degradation of NAND use that influences the startup time ? Why ? A: Yes - on boot flash abstraction library (old one) read metadata from all sectors to rebuild physical - logical mapping table. davbo-msft (Moderator)[2010-3-30 12:27]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Need addition info on this question. Can you provide more details on what you are trying to do in Silverlight? davbo-msft (Moderator)[2010-3-30 12:27]: Q: If one has an image on a Silverlight page, it seems to be cached. How would one refresh that cache after changing the underlying image? A: Additonal Info: if you want to manually touch the pixels use WriteableBitmap if you want to use the underlying HWND then use IXRVisualHost::GetHWND() davbo-msft (Moderator)[2010-3-30 12:28]: Q: Writable bitmap, is there an example of the syntax? A: if you want to manually touch the pixels use WriteableBitmap if you want to use the underlying HWND then use IXRVisualHost::GetHWND() davbo-msft (Moderator)[2010-3-30 12:29]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? A: Can I get more information about this question about what you are trying to accomplish in Silverlight? davbo-msft (Moderator)[2010-3-30 12:31]: Q: IXRVisualHost::GetHWND() exactly what I needed Thanks, A: Your welcome Sing Wee [MS] (Expert)[2010-3-30 12:31]: Q: ok. thanks for the book's link A: No problem. Travis Hobrla [MS] (Expert)[2010-3-30 12:32]: Q: Typically for SoC devices you name your hardware specific libraries in the form "SOCDIRNAME_LIBNAME". In our platform "OMAP35XX_TPS659XX_TI_V1" if you do this we cause the catalog parser to die... For example if we have a library "Musbfn_OMAP35XX_TPS659XX_TI_V1.dll" entering this in the catalogs pbcxml file in a <module> section causes the XML parser to fail with : Error 3 The 'urn:Microsoft.PlatformBuilder/Catalog:Module' element is        invalid - The value '012345678901234567890123456789.dll' is invalid         according to its datatype         'urn:Microsoft.PlatformBuilder/Catalog:CatalogFileName' - The actual         length is greater than the MaxLength value. A: There are a couple workarounds I can think of. I believe the Module element is only used when doing SYSGEN parsing to make sure dependent SYSGENs are present when the item is selected, so I believe it is optional to the catalog. The other obvious workaround is to shorten the soc name. I realize neither of these solutions is ideal. This is not something we anticipated when we tested CE6.0, sorry. Travis Hobrla [MS] (Expert)[2010-3-30 12:33]: Q: I am getting this error only when I select the KdStub as the debugger in Target device connectivity. A: Right, but KdStub is the debugger that you should use. Have you tried the steps I suggested? Travis Hobrla [MS] (Expert)[2010-3-30 12:36]: Q: If I select Active KTIL, My OS doesn't boots. It says "loading NK.EXE at 0x<xxxxx> location" after that nothing comes in the debug log. A: Can you look at the serial debug output and see what is happening there? Often it can give you a clue to the KITL driver malfunctioning. Travis Hobrla [MS] (Expert)[2010-3-30 12:38]: Q: I have tried that and I am getting the same error. A: I am assuming you have a device created in Target -> Connectivity Options in Platform Builder. What are the Kernel download / Kernel transport for your device? Travis Hobrla [MS] (Expert)[2010-3-30 12:40]: Q: KITL: *** Device Name CEPC56059 *** WARN: KITL will run in polling mode VBridge:: built on [Jul 10 2009] time [10:20:14] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA1B84860] to [0xA1B88860]. Rx buffer [0xA1B88880] to [0xA1B8C880]. VBridge:: NK add MAC: [0-60-65-2-DA-FB] Connecting to Desktop KITL: Connected host IP: 1 Port: 1086 .. this is the output of the serial debug A: This looks reasonable and does not give clues as to why boot would halt at that point. If you capture a network trace or turn on KITL debug zones via dpCurSettings in kitl.dll, do you see KITL active after this? Travis Hobrla [MS] (Expert)[2010-3-30 12:41]: Q: Both is happening via Ethernet. A: Only thing I have left to suggest is a Platform Builder installation Repair, then. Karel Danihelka [MS] (Expert)[2010-3-30 12:42]: Q: Hi, I saw that the ATADISK is quite generic and des not have any optimizations. Do you have any advice to consider while tryin to improve the performance of it? A: If I remember correctly sample code has support for some specific hardware controllers (little obsolete now). This should be good start point (if you will not decide take existing driver as sample and write you own). Travis Hobrla [MS] (Expert)[2010-3-30 12:44]: Q: I didn't do that. I have to try. A: I think that's the next valid step. You need to figure out whether KITL is hanging or the device - use instrumented serial debug messages and network trace to determine this. Sing Wee [MS] (Expert)[2010-3-30 12:46]: Q: KITL: *** Device Name CEPC56059 *** WARN: KITL will run in polling mode VBridge:: built on [Jul 10 2009] time [10:20:14] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA1B84860] to [0xA1B88860]. Rx buffer [0xA1B88880] to [0xA1B8C880]. VBridge:: NK add MAC: [0-60-65-2-DA-FB] Connecting to Desktop KITL: Connected host IP: 1 Port: 1086 .. this is the output of the serial debug A: Neo, have you by any chance tried looking into your firewall to see if it might be blocking traffic on any particular ports? Wireshark/netmon might be able to help you here if that's the issue. davbo-msft (Moderator)[2010-3-30 12:48]: Q: I lost spell check, how can i get it back A: Hello - can you give additional details about your question? Is this related to a Windows CE Embedded application? masatos_MSFT (Expert)[2010-3-30 12:51]: Q: When attempting to run the CETK cellcore tests the documentation states the pre-requisites include "stinger.ini", "ltk.ini" but windows CE doesn't provide these or document what they fully need to contain. Implicitly you also need "datatrans.xml" which isn't supplied. If you get around this error and steal these from Windows Mobile instead, when you try and run the CETK tests you get a data abort in radiometricsdll.dll. How should we invoke the cellcore parts of CETK? A: Hi Pev, what version of Windows CE and CETK are you using? I do not have the expertise to answer this question, but can find somebody who can. Travis Hobrla [MS] (Expert)[2010-3-30 12:52]: Q: I don't see a kitlcore.dll in my OS. is my debug image fails to load because of that? A: kitl.dll should be all that's needed, kitlcore.lib is linked into that. Travis Hobrla [MS] (Expert)[2010-3-30 12:55]: Q: I've got a platform (not developed by myself) where I2C bus support has to be provided through the OAL as the kernel needs to talk to devices such as the power management IC and gas gauge so a 'proper' I2C driver hanging off device manager isn't possible. This happens to be a polled driver, so obviously it hits the system hard when either under lots of traffic or an error condition occurs and the driver constantly polls. I originally thought that there was no straightforward way to make such code interrupt driven in the kernel (as it's a cludge) but I realised that that's exactly what ETHDBG drivers do. Is there any reason why I shouldn't have a go at implementing a similar mechanism for our kernel resident I2C driver? If not, are there any obvious pitfalls - I've not seen any other BSP's do this in the past... A: You can make a 'proper' driver that calls down into the OAL to do the actual I2C transactions. Alternatively you can build an interrupt-based version in the OAL where you handle everything in the ISR. There is nothing wrong with that so long as the rest of your drivers and app threads can handle longer times with interrupts off while you are servicing I2C interrupts. Sing Wee [MS] (Expert)[2010-3-30 12:55]: Q: I am having trouble with my mouse, I have the microsoft wireless mobile mouse 3000, when I push the scroll button I am suppose to have autoscroll instead it shows other web pages,Can you help me out tell me what to do!!! A: Sorry, this current chat is about Windows Embedded Compact. Hope you're able to find an answer to your question elsewhere. davbo-msft (Moderator)[2010-3-30 12:56]: Q: Is the Silverlight Animation "Spline" a BezierSpline? A: Spline - http://msdn.microsoft.com/en-us/library/ee501495.aspx<BR< a>>   masatos_MSFT (Expert)[2010-3-30 12:57]: Thanks for the info Pev. I will follow up with the CETK experts here and get back to you. davbo-msft (Moderator)[2010-3-30 12:59]: Q: Spline- bad link A: http://msdn.microsoft.com/en-us/library/ee501495.aspx davbo-msft (Moderator)[2010-3-30 13:0]: Q: Sorry, got to tirm the ">" A: No Worries http://msdn.microsoft.com/en-us/library/ee501495.aspx davbo-msft (Moderator)[2010-3-30 13:0]: Hello everyone, we are just about out of time. Thank you for joining us for our Windows Embedded CE 6.0 chat today! <http://www.Microsoft.com/Embedded>; A special thank you to the product group members for coming out. The transcript of today’s chat will be posted online as soon as possible, to <http://msdn.microsoft.com/en-us/chats>;. We’ll see you again for another chat next month. Please check <http://msdn.microsoft.com/en-us/chats>; for the list of upcoming chats. If you still have unanswered questions, let me suggest that you post them on one of our newsgroups on <http://msdn.microsoft.com/en-us/windowsembedded/ce/default.aspx> -Windows Embedded CE 6.0 R3 Now Available! <http://msdn.microsoft.com/windowsembedded/ce/dd630616.aspx>; davbo-msft (Moderator)[2010-3-30 13:1]: Q: hi everybody. I would like to know if there is something know about a bug in RTC API (VOIP), especially when using SIP. According the to the analysis with application verifyier there is a heap link in rtcdllmedia.dll. All of the unreleased chunks seem to have a size of 6560 bytes. A: I will follow up with the Networking Team for a response. davbo-msft (Moderator)[2010-3-30 13:1]: Q: Hi, we've problems with debugging of applications (= breakpoints in Platform Builder will be ignored) over KITL on Windows CE 5.0, if the PDB files are large (over 60MB). Are there any limitations to size of the PDB files? A: I will follow up with the tools team for a response and post with the transcript. Sing Wee [MS] (Expert)[2010-3-30 13:1]: Q: I am unable to use the target control in my development environment. any ideas? A: Make sure you have SYSGEN_SHELL=1 set in your build environment. davbo-msft (Moderator)[2010-3-30 13:3]: Q: what are the main differences between Object Store and RAM disk ? They are both in RAM...are there performance differences ? access differences ? A: I will follow up with the Core Team and get a response posted with the transcript to MSDN  The Questions   [2010-3-30 12:57]: Thanks for the info Pev. I will follow up with the CETK experts here and get back to you. [2010-3-30 12:59]:   [2010-3-30 13:0]:   [2010-3-30 13:0]: Hello everyone, we are just about out of time. Thank you for joining us for our Windows Embedded CE 6.0 chat today! <http://www.Microsoft.com/Embedded>; A special thank you to the product group members for coming out. The transcript of today’s chat will be posted online as soon as possible, to <http://msdn.microsoft.com/en-us/chats>;. We’ll see you again for another chat next month. Please check <http://msdn.microsoft.com/en-us/chats>; for the list of upcoming chats. If you still have unanswered questions, let me suggest that you post them on one of our newsgroups on <http://msdn.microsoft.com/en-us/windowsembedded/ce/default.aspx> -Windows Embedded CE 6.0 R3 Now Available! <http://msdn.microsoft.com/windowsembedded/ce/dd630616.aspx>; [2010-3-30 13:1]: [2010-3-30 13:1]: [2010-3-30 13:1]: [2010-3-30 13:3]: neo (Guest)[2010-3-30 11:37]: Hi all KellyG (Guest)[2010-3-30 11:37]: Hi KellyG (Guest)[2010-3-30 11:37]: I have a question unrelated to windows Ce embedded, can you please help me?? neo (Guest)[2010-3-30 11:38]: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals! c neo (Guest)[2010-3-30 11:38]: yes. post it. May be i cud give a try KellyG (Guest)[2010-3-30 11:38]: My Product key listed on my tower is not the product key I need for microsoft office, but that is the only product key listed. neo (Guest)[2010-3-30 11:39]: I hope this is a chat for windows embedded. please post ur queries in office forums KellyG (Guest)[2010-3-30 11:39]: it is but i could not find a forum for office neo (Guest)[2010-3-30 11:40]: I think moderators will help u out. @ davbo-msft: can u help this guy? neo (Guest)[2010-3-30 11:41]: Q: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals. Where should i start? davbo-msft (Moderator)[2010-3-30 11:50]: Our chat today covers the topic of Windows Embedded CE! 1. This chat will last for one hour. During this hour, our Experts will respond to as many questions as they can. Please understand that there may be some questions we cannot respond to due to lack of information or because the information is not yet public. 2. We encourage you to submit questions for our Experts. To do so, type your questions in the send box, select the “ask the Experts” box and click SEND. Questions sent directly to the Guest Chat room will not be answered by the Experts, but we encourage other community members to assist. 3. We ask that you stay on topic for the duration of the chat. This helps the Guests and Experts follow the conversation more easily. We invite you to ask off topic questions after this chat is over, but not during. 4. Please abide by the Chat Code of Conduct. Chat code of conduct: <http://msdn.microsoft.com/chats/chatroom.aspx?ctl=hlp#Conduct>; Pev (Guest)[2010-3-30 11:54]: Evening! davbo-msft (Moderator)[2010-3-30 11:54]: Hello everyone this is Dave Boyce - I worked in the Multimedia area for Windows CE. neo (Guest)[2010-3-30 11:55]: hello dave neo (Guest)[2010-3-30 11:55]: The chat code of conduct link is not working! Pev (Guest)[2010-3-30 11:56]: Best be polite just in case then ;-) neo (Guest)[2010-3-30 11:56]: davbo-msft (Moderator)[2010-3-30 11:57]: I'll check out the issue w/ the link paolopat (Guest)[2010-3-30 12:0]: Hello davbo-msft (Moderator)[2010-3-30 12:0]: We are pleased to welcome our Experts for today’s chat. I will have them introduce themselves now. Chat will begin in a couple of minutes. <http://www.Microsoft.com/Embedded>; paolopat (Guest)[2010-3-30 12:3]: Hello Experts ! neo (Guest)[2010-3-30 12:3]: Welcome all! paolopat (Guest)[2010-3-30 12:3]: Q: I want to partition my NAND Flash device. One partition to use for hive ragistry and the other for the apps and data. The only way to do it is programmatically or setting some registry values ? neo (Guest)[2010-3-30 12:3]: Q: I need to implement hardware timers on my windows CE 6.0 device to trigger events at microsecond intervals. Where should i start? neo (Guest)[2010-3-30 12:5]: Q: My CPU is Intel celeron M processor 1Ghz. Pev (Guest)[2010-3-30 12:5]: neo: if your silicon has multiple general purpose timers, pick one that's not in use for the system timer / profiler and set it up to trigger irqs for your purpose. You can't guarantee hard realtime type responses though... GarySwalling (Guest)[2010-3-30 12:5]: Q: Is Windows Phone 7 related to Windows CE? If so, can you tell me what version of Windows CE is the basis? Is it in fact the new version of Windows Mobile? Pev (Guest)[2010-3-30 12:6]: Q: Hi guys, what's the formal way to report bugs back to the core team / product team? The mechanism of calling the support phone number every time is really onerous and time-consuming. Is there another mechanism? paolopat (Guest)[2010-3-30 12:6]: Q: But the operation for creating the partitions ? neo (Guest)[2010-3-30 12:6]: Q: If i need to implement it using interrupt handlers, What are all the files that I should look at? GPM (Guest)[2010-3-30 12:6]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? Jhony (Guest)[2010-3-30 12:7]: Q: I created a OS design with KITL and kernel debugger enabled. But I am unable to connect to the target for debugging. I am getting the following error when i try to connect with the device. PB Debugger Cannot initialize the Kernel Debugger. PB Debugger Debugger could not initialize connection. PB Debugger The Kernel Debugger is waiting to connect with target. PB Debugger The Kernel Debugger has been disconnected successfully. Charles (Guest)[2010-3-30 12:7]: What will be different in Windows Compact 7 from CE 6.0? neo (Guest)[2010-3-30 12:8]: Can I have the book's name please? kiefs_dev (Guest)[2010-3-30 12:8]: Q: hi everybody. I would like to know if there is something know about a bug in RTC API (VOIP), especially when using SIP. According the to the analysis with application verifyier there is a heap link in rtcdllmedia.dll. All of the unreleased chunks seem to have a size of 6560 bytes. paolopat (Guest)[2010-3-30 12:10]: Q: So...I have to modify file system code to create 2 partition at system startup ?!! I haven't understood.... neo (Guest)[2010-3-30 12:10]: Q: Do u mean ISR/IST implementation? How can i register an interrupt? What kind of interrupt should i register? neo (Guest)[2010-3-30 12:11]: Q: Can I have the book's name please? Charles (Guest)[2010-3-30 12:11]: Q: What will be different in Windows Compact 7 from CE 6.0? PaulT (Guest)[2010-3-30 12:11]: neo: I'd say that you really need the docs for YOUR BSP, not generic documents for BSPs in general. Each BSP may be architected differently. If you're using the CEPC BSP, then the documentation that comes with Platform Builder is a reasonable place to look. GPM (Guest)[2010-3-30 12:11]: Q: If one has an image on a Silverlight page, it seems to be cached. How would one refresh that cache after changing the underlying image? Elektrobit (Guest)[2010-3-30 12:12]: Q: Hi, we've problems with debugging of applications (= breakpoints in Platform Builder will be ignored) over KITL on Windows CE 5.0, if the PDB files are large (over 60MB). Are there any limitations to size of the PDB files? Jhony (Guest)[2010-3-30 12:15]: Q: I am using CE 6.0. There is no cesvchost process running in my system. alexquisi (Guest)[2010-3-30 12:15]: Q: Hi, I saw that the ATADISK is quite generic and des not have any optimizations. Do you have any advice to consider while tryin to improve the performance of it? Jhony (Guest)[2010-3-30 12:17]: Windows XP service pack 1 Jhony (Guest)[2010-3-30 12:17]: Q: sorry! Windows XP SP3 neo (Guest)[2010-3-30 12:19]: Q: The link for developing device drivers is not working. can u please check that? paolopat (Guest)[2010-3-30 12:20]: Q: I have a NAND Flash on my target device. On this flash I have the hive registry and an application.I have observed that when the NAND flash is fully, the system startup time is longer....is there a degradation of NAND use that influences the startup time ? Why ? Pev (Guest)[2010-3-30 12:20]: Q: When attempting to run the CETK cellcore tests the documentation states the pre-requisites include "stinger.ini", "ltk.ini" but windows CE doesn't provide these or document what they fully need to contain. Implicitly you also need "datatrans.xml" which isn't supplied. If you get around this error and steal these from Windows Mobile instead, when you try and run the CETK tests you get a data abort in radiometricsdll.dll. How should we invoke the cellcore parts of CETK? Pev (Guest)[2010-3-30 12:21]: Hi all, Pev (Guest)[2010-3-30 12:21]: oops Pev (Guest)[2010-3-30 12:21]: :-D Pev (Guest)[2010-3-30 12:24]: Typically for SoC devices you name your hardware specific libraries in the form "SOCDIRNAME_LIBNAME". In our platform "OMAP35XX_TPS659XX_TI_V1" if you do this we cause the catalog parser to die... For example if we have a library "Musbfn_OMAP35XX_TPS659XX_TI_V1.dll" entering this in the catalogs pbcxml file in a <module> section causes the XML parser to fail with : Pev (Guest)[2010-3-30 12:25]: Q: Error 3 The 'urn:Microsoft.PlatformBuilder/Catalog:Module' element is        invalid - The value '012345678901234567890123456789.dll' is invalid         according to its datatype         'urn:Microsoft.PlatformBuilder/Catalog:CatalogFileName' - The actual         length is greater than the MaxLength value. GPM (Guest)[2010-3-30 12:25]: Q: Writable bitmap, is there an example of the syntax? Pev (Guest)[2010-3-30 12:25]: Q: Typically for SoC devices you name your hardware specific libraries in the form "SOCDIRNAME_LIBNAME". In our platform "OMAP35XX_TPS659XX_TI_V1" if you do this we cause the catalog parser to die... For example if we have a library "Musbfn_OMAP35XX_TPS659XX_TI_V1.dll" entering this in the catalogs pbcxml file in a <module> section causes the XML parser to fail with : Error 3 The 'urn:Microsoft.PlatformBuilder/Catalog:Module' element is        invalid - The value '012345678901234567890123456789.dll' is invalid         according to its datatype         'urn:Microsoft.PlatformBuilder/Catalog:CatalogFileName' - The actual         length is greater than the MaxLength value. Pev (Guest)[2010-3-30 12:25]: sorry, messed up submission there! GPM (Guest)[2010-3-30 12:26]: Q: I would like to get a handle to a Silverlight screen section, is that possiable? GPM (Guest)[2010-3-30 12:28]: Q: IXRVisualHost::GetHWND() exactly what I needed Thanks, PaulT (Guest)[2010-3-30 12:29]: GPM: You don't have to keep submitting the questions. The chat experts have an application that they're using to follow the chat and all Ask the Experts questions are logged. Jhony (Guest)[2010-3-30 12:29]: Q: I am getting this error only when I select the KdStub as the debugger in Target device connectivity. neo (Guest)[2010-3-30 12:30]: Q: ok. thanks for the book's link Pev (Guest)[2010-3-30 12:31]: Hm, did those two I submitted get picked up by anyone? neo (Guest)[2010-3-30 12:33]: Q: If I select Active KTIL, My OS doesn't boots. It says "loading NK.EXE at 0x<xxxxx> location" after that nothing comes in the debug log. PaulT (Guest)[2010-3-30 12:34]: Pev: PaulT (Guest)[2010-3-30 12:35]: Pev: I'm sure they did. The guys who are actually on the chat may not be experts in that part of things. That's usually the explanation when you don't get an answer in 10 minutes or so. Pev (Guest)[2010-3-30 12:36]: Ah, fair enough Susie (Guest)[2010-3-30 12:36]: My Outlook Express incoming mail is corrput. No ONE has been able to fix the problem, Dell or Norton. I have dial up I'm in a rural area Jhony (Guest)[2010-3-30 12:37]: Q: I have tried that and I am getting the same error. Pev (Guest)[2010-3-30 12:37]: Susie : Use Thunderbird instead :-D PaulT (Guest)[2010-3-30 12:37]: Susie: Sorry, but this chat is not about Windows, but Embedded (like what runs on a phone). Your best chance is to find a local expert or talk to your ISP. paolopat (Guest)[2010-3-30 12:37]: Q: what are the main differences between Object Store and RAM disk ? They are both in RAM...are there performance differences ? access differences ? Susie (Guest)[2010-3-30 12:38]: My computer knowlege is very limited, what is Thunderbird? Pev (Guest)[2010-3-30 12:38]: A different email client :-D neo (Guest)[2010-3-30 12:39]: Q: KITL: *** Device Name CEPC56059 *** WARN: KITL will run in polling mode VBridge:: built on [Jul 10 2009] time [10:20:14] VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes Tx buffer [0xA1B84860] to [0xA1B88860]. Rx buffer [0xA1B88880] to [0xA1B8C880]. VBridge:: NK add MAC: [0-60-65-2-DA-FB] Connecting to Desktop KITL: Connected host IP: 1 Port: 1086 .. this is the output of the serial debug Susie (Guest)[2010-3-30 12:39]: Do I need to uninstall Outlook Express youngboyzie (Guest)[2010-3-30 12:39]: I need to start battery calibration for my new battery for my dell inspiron 1525 laptop and should be able to reach the BIOS screen by hitting f2 but this isnt working... help? Pev (Guest)[2010-3-30 12:39]: Nah, you can run it instead - you'll still need help from your ISP to configure it I expect Jhony (Guest)[2010-3-30 12:39]: Q: Both is happening via Ethernet. PaulT (Guest)[2010-3-30 12:40]: youngboyzie: You're off-topic. This is not a general chat for Windows and certainly not for Dell. You'll have to ask Dell how to get to setup; it's their machine. bill (Guest)[2010-3-30 12:41]: I lost spell check, how can i get et back neo (Guest)[2010-3-30 12:42]: Q: I didn't do that. I have to try. Jhony (Guest)[2010-3-30 12:43]: Q: Ok. I will do it then. bill (Guest)[2010-3-30 12:43]: Q: I lost spell check, how can i get it back PaulT (Guest)[2010-3-30 12:44]: bill: This isn't a general Windows chat. There are some Web forums that you might try. GarySwalling (Guest)[2010-3-30 12:45]: Q: Thanks, I found the Phone 7 presentation at http://live.visitmix.com/MIX10/Sessions/CL13 GPM (Guest)[2010-3-30 12:45]: Q: Is the Silverlight Animation "Spline" a BezierSpline? neo (Guest)[2010-3-30 12:46]: Q: ok. I'll do it. thanks Pev (Guest)[2010-3-30 12:46]: Whowever was asking about KITL connection : I've had this loads in the past. I think I started debugging last time by using wireshark to see what was happening on the network then setting up the OAL_ETHER and OAL_FUNC and OAL_VERBOSE as well as OAL_KITL flags to see what was actually happening in the driver.... Pev (Guest)[2010-3-30 12:47]: I'd generally make sure that you're testing though a 10baseT hub (instead of anything faster) and forcing Active KITL in polled mode too... neo (Guest)[2010-3-30 12:48]: Q: I disabled the firewall in my PC. Pev (Guest)[2010-3-30 12:50]: Q: I've got a platform (not developed by myself) where I2C bus support has to be provided through the OAL as the kernel needs to talk to devices such as the power management IC and gas gauge so a 'proper' I2C driver hanging off device manager isn't possible. This happens to be a polled driver, so obviously it hits the system hard when either under lots of traffic or an error condition occurs and the driver constantly polls. I originally thought that there was no straightforward way to make such code interrupt driven in the kernel (as it's a cludge) but I realised that that's exactly what ETHDBG drivers do. Is there any reason why I shouldn't have a go at implementing a similar mechanism for our kernel resident I2C driver? If not, are there any obvious pitfalls - I've not seen any other BSP's do this in the past... neo (Guest)[2010-3-30 12:51]: Q: I don't see a kitlcore.dll in my OS. is my debug image fails to load because of that? Pev (Guest)[2010-3-30 12:52]: Q: Hi masatos, I'm using Windows Embedded CE 6.0 with R3 and patched to feb 2010's QFE's (with it's associated CETK version) this is a machine with only CE 6.0 on (no conflicts with earlier CE or WM...) neo (Guest)[2010-3-30 12:54]: ok. Got it neo (Guest)[2010-3-30 12:54]: Q: ok. Got it Roundman (Guest)[2010-3-30 12:55]: Q: I am having trouble with my mouse, I have the microsoft wireless mobile mouse 3000, when I push the scroll button I am suppose to have autoscroll instead it shows other web pages,Can you help me out tell me what to do!!! Pev (Guest)[2010-3-30 12:55]: Hey neo, debugging kitl issues is really frustrating but dont lose heart :-) neo (Guest)[2010-3-30 12:55]: @ pev : u fixed the problem of KITL after that? neo (Guest)[2010-3-30 12:56]: I am getting the same error again and again. I even cleaned my environment and tried in a fresh PC. But didn't succeed yet Pev (Guest)[2010-3-30 12:56]: Well, eventually - my experiences probably won't help you as different platforms have different reasons for doing that neo (Guest)[2010-3-30 12:56]: I think so PaulT (Guest)[2010-3-30 12:58]: neo: Have you searched the old messages in microsoft.public.windowsce.platbuilder? It seems to me that there was a packet size situation where it was possible to have problems with KITL connections based on a setting on the PC. Google Groups, groups.google.com, Advanced Groups Search will allow you to search a single newsgroup or a set of newsgroups easily. GPM (Guest)[2010-3-30 12:58]: Q: Spline- bad link PaulT (Guest)[2010-3-30 12:58]: GPM: without the > at the end does it work? It seems to for me... neo (Guest)[2010-3-30 12:58]: But some times if i try to connect to the device again. The Image information is seen in the serial debug. what does that mean?Download BIN file information: ----------------------------------------------------- [0]: Base Address=0x220000 Length=0x18DAADC Received a broadcast message !CheckUDP: Not UDP (proto = 0x00000001) after this i am getting the old errors. PB debugger cannot initialize ... GPM (Guest)[2010-3-30 12:59]: Q: Sorry, got to tirm the ">" neo (Guest)[2010-3-30 12:59]: ok paul. I ll look into that. davbo-msft (Moderator)[2010-3-30 13:0]: Hello everyone, we are just about out of time. Thank you for joining us for our Windows Embedded CE 6.0 chat today! <http://www.Microsoft.com/Embedded>; A special thank you to the product group members for coming out. The transcript of today’s chat will be posted online as soon as possible, to <http://msdn.microsoft.com/en-us/chats>;. We’ll see you again for another chat next month. Please check <http://msdn.microsoft.com/en-us/chats>; for the list of upcoming chats. If you still have unanswered questions, let me suggest that you post them on one of our newsgroups on <http://msdn.microsoft.com/en-us/windowsembedded/ce/default.aspx> -Windows Embedded CE 6.0 R3 Now Available! <http://msdn.microsoft.com/windowsembedded/ce/dd630616.aspx>; neo (Guest)[2010-3-30 13:1]: Q: I am unable to use the target control in my development environment. any ideas? Pev (Guest)[2010-3-30 13:1]: Sure, if KITL isn't connected target control won't work as it runs over kitl... neo (Guest)[2010-3-30 13:1]: ok .thanks pev neo (Guest)[2010-3-30 13:2]: yes. sysgen_shell is set to 1 neo (Guest)[2010-3-30 13:2]: Q: yes. sysgen_shell is set to 1 Marcelovk (Guest)[2010-3-30 13:2]: Q: Is there any way to extract the default command lines of the tests in CETK? I want to have it running unconnected from the desktop.   Copyright © 2010 – Bruce Eitman All Rights Reserved

    Read the article

  • Analytics in an Omni-Channel World

    - by David Dorf
    Retail has been around ever since mankind started bartering.  The earliest transactions were very specific to the individuals buying and selling, then someone had the bright idea to open a store.  Those transactions were a little more generic, but the store owner still knew his customers and what they wanted.  As the chains rolled out, customer intimacy was sacrificed for scale, and retailers began to rely on segments and clusters.  But thanks to the widespread availability of data and the technology to convert said data into information, retailers are getting back to details. The retail industry is following a maturity model for analytics that is has progressed through five stages, each delivering more value than the previous. Store Analytics Brick-and-mortar retailers (and pure-play catalogers as well) that collect anonymous basket-level data are able to get some sense of demand to help with allocation decisions.  Promotions and foot-traffic can be measured to understand marketing effectiveness and perhaps focus groups can help test ideas.  But decisions are influenced by the majority, using faceless customer segments and aggregated industry data points.  Loyalty programs help a little, but in many cases the cost outweighs the benefits. Web Analytics The Web made it much easier to collect data on specific, yet still anonymous consumers using cookies to track visits. Clickstreams and product searches are analyzed to understand the purchase journey, gauge demand, and better understand up-selling opportunities.  Personalization begins to allow retailers target market consumers with recommendations. Cross-Channel Analytics This phase is a minor one, but where most retailers probably sit today.  They are able to use information from one channel to bolster activities in another. However, there are technical challenges combining data silos so its not an easy task.  But for those retailers that are able to perform analytics on both sources of data, the pay-off is pretty nice.  Revenue per customer begins to go up as customers have a better brand experience. Mobile & Social Analytics Big data technologies are enabling a 360-degree view of the customer by incorporating psychographic data from social sites alongside traditional demographic data.  Retailers can track individual preferences, opinions, hobbies, etc. in order to understand a consumer's motivations.  Using mobile devices, consumers can interact with brands anywhere, anytime, accessing deep product information and reviews.  Mobile, combined with a loyalty program, presents an opportunity to put shopping into geographic context, understanding paths to the store, patterns within the store, and be an always-on advertising conduit. Omni-Channel Analytics All this data along with the proper technology represents a new paradigm in which the clock is turned back and retail becomes very personal once again.  Rich, individualized data better illuminates demand, allows for highly localized assortments, and helps tailor up-selling.  Interactions with all channels help build an accurate profile of each consumer, and allows retailers to tailor the retail experience to meet the heightened expectations of today's sophisticated shopper.  And of course this culminates in greater customer satisfaction and business profitability.

    Read the article

  • Ti Launchpad

    - by raysmithequip
    Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now.  Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself.  That would of been the web expressions 4 I bought a few weeks back.  With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd.  No cd.  I had already downloaded IAR  another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit.  Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity.  But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box.  The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI.  It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit.  Assembly.  I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore.  Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future.  I may document the code here.  Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob.  For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat.  Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored.  If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

    Read the article

  • The Connected Company: WebCenter Portal - Feedback - Analytics and Polls

    - by Michael Snow
    Evernote Export body, td { }Guest Post by: Mitchell Palski, Staff Sales Consultant The importance of connecting peers has been widely recognized and socialized as a critical component of employee intranets. Organizations are striving to provide mediums for sharing knowledge and improving awareness across their enterprise. Indirectly, the socialization of your enterprise should lead to cost savings and improved product/service quality. However, many times the direct effects of connecting an organization’s leadership with its employees are overlooked. Oracle WebCenter Portal can help you bridge that gap by gathering implicit and explicit feedback. Implicit Feedback Through Usage Analytics Analytics allows administrators to track and analyze WebCenter Portal traffic and usage. Analytics provides the following basic functionality: Usage Tracking Metrics: Analytics collects and reports metrics of common WebCenter Portal functions, including community and portlet traffic. Behavior Tracking: Analytics can be used to analyze WebCenter Portal metrics to determine usage patterns, such as page visit duration and usage over time. User Profile Correlation: Analytics can be used to correlate metric information with user profile information. Usage tracking reports can be viewed and filtered by user profile data such as country, company or title. Usage analytics help measure how users interact with website content – allowing your IT staff and business analysts to make informed decisions when planning development for your next intranet enhancement. For example: If users are not accessing your Announcements page and missing critical information that they need to be aware of, you may elect to use graphical links on the home page to direct more users to that page. As a result, the number of employee help-requests to HR decreases. If users are not accessing your News page to read recent articles, you may elect to stop spending as much time updating the page with new stories and cut costs in your communications department. You notice that there is a high volume of users accessing the Employee Dashboard page so your organization decides to continue making personalization enhancements to the page and investing in the Portal tool that most users are accessing. Usage analytics aren’t necessarily a new concept in the IT industry. What sets WebCenter Portal Analytics apart is: Reports are tailored for WebCenter specific tools Report can be easily added to a page as simple as a drag-and-drop Explicit Feedback Through Polls WebCenter Portal users can create, edit, take, and analyze online polls. With polls, you can survey your audience (such as their opinions and their experience level), check whether they can recall important information, and gather feedback and metrics. How many times have you been involved in a requirements discussion and someone has asked a question similar to “Well how do you know that no one likes our home page?” and the response is “Everyone says they hate it! That’s all anyone complains about.” No one has any measurable, quantifiable metric to gauge user satisfaction. Analytics measure usage, but your organization also needs to measure the quality of your portal as defined by the actual people that use it. With that information, your leadership can make informed decisions that will not only match usage patterns but also relate to employees on a personal level. The end result is a connection between employees and leadership that gives everyone in the organization a sense of ownership of their Portal rather than the feeling of development decisions being segregated to leadership only. Polls can be created and edited through the Poll Manager: Polls and View Poll Results can easily be added to a page through drag-and-drop. What did we learn? Being a “connected” company doesn’t just mean helping employees connect with each other horizontally across your enterprise. It also means connecting those employees to the decisions that affect their everyday activities. Through WebCenter Portal Usage Analytics and Polls, any decision that is made to remove a Portal page, update a Portal page, or develop new Portal functionality, can be justified by quantifiable metrics. Instead of fielding complaints and hearing that your employees don’t have a voice, give those employees a voice and listen!

    Read the article

  • Comparing Apples and Pairs

    - by Tony Davis
    A recent study, High Costs and Negative Value of Pair Programming, by Capers Jones, pulls no punches in its assessment of the costs-to- benefits ratio of pair programming, two programmers working together, at a single computer, rather than separately. He implies that pair programming is a method rushed into production on a wave of enthusiasm for Agile or Extreme Programming, without any real regard for its effectiveness. Despite admitting that his data represented a far from complete study of the economics of pair programming, his conclusions were stark: it was 2.5 times more expensive, resulted in a 15% drop in productivity, and offered no significant quality benefits. The author provides a more scientific analysis than Jon Evans’ Pair Programming Considered Harmful, but the theme is the same. In terms of upfront-coding costs, pair programming is surely more expensive. The claim of productivity loss is dubious and contested by other studies. The third claim, though, did surprise me. The author’s data suggests that if both the pair and the individual programmers employ static code analysis and testing, then there is no measurable difference in the resulting code quality, in terms of defects per function point. In other words, pair programming incurs a massive extra cost for no tangible return in investment. There were, inevitably, many criticisms of his data and his conclusions, a few of which are persuasive. Firstly, that the driver/observer model of pair programming, on which the study bases its findings, is far from the most effective. For example, many find Ping-Pong pairing, based on use of test-driven development, far more productive. Secondly, that it doesn’t distinguish between “expert” and “novice” pair programmers– that is, independently of other programming skills, how skilled was an individual at pair programming. Thirdly, that his measure of quality is too narrow. This point rings true, certainly at Red Gate, where developers don’t pair program all the time, but use the method in short bursts, while tackling a tricky problem and needing a fresh perspective on the best approach, or more in-depth knowledge in a particular domain. All of them argue that pair programming, and collective code ownership, offers significant rewards, if not in terms of immediate “bug reduction”, then in removing the likelihood of single points of failure, and improving the overall quality and longer-term adaptability/maintainability of the design. There is also a massive learning benefit for both participants. One developer told me how he once worked in the same team over consecutive summers, the first time with no pair programming and the second time pair-programming two-thirds of the time, and described the increased rate of learning the second time as “phenomenal”. There are a great many theories on how we should develop software (Scrum, XP, Lean, etc.), but woefully little scientific research in their effectiveness. For a group that spends so much time crunching other people’s data, I wonder if developers spend enough time crunching data about themselves. Capers Jones’ data may be incomplete, but should cause a pause for thought, especially for any large IT departments, supporting commerce and industry, who are considering pair programming. It certainly shouldn’t discourage teams from exploring new ways of developing software, as long as they also think about how to gather hard data to gauge their effectiveness.

    Read the article

  • Internet Radio Station for University

    - by ryan
    I am trying to help my University Student Radio station rethink the setup of the way they stream music, but I have some questions regarding the use of Ubuntu to stream music. Currently, the radio station uses two windows machines: one of which is used to stream the radio station and serve the website, and the other is used by rotating djs to select songs and create playlists. The computer used by djs feeds mono into the sound card of the server and the server streams the feed online. -Ideally I would like to maintain a two-computer setup: One computer as server, and another that is used to select and play music by rotating djs. -I would like to use Ubuntu for the server. -I would like to use Windows for the other machine. -The server should be able to stream song information. First, is there a way to somehow get the song information from an analog feed? Second, what is the best streaming server for radio? I have encountered shoutcast, icecast, and darwin, but I don't know where to begin in attempting to gauge them. Finally, if anyone has any tips or pointers about small internet radio station management/ setup they would be appreciated as this is my first radio station, and I am eager to hear of past experiences.

    Read the article

  • jitter if multiple outliers in ggplot2 boxplot

    - by Andreas
    I am trying to find a suitable display to illustrate various properties within and across school classes. For each class there is only 15-30 data points (pupils). Right now i am leaning towards a whisker-less boxplot, showing only 1.,2. and 3. quartile + datapoints more then e.g. 1 population SD +/- the sample median. This I can do. However - I need to show this graph to some teachers, in order to gauge what they like most. I'd like to compare my graph with a normal boxplot. But the normal boxplot looks the same if there is only one outlier, or e.g. 5 outliers at the same value. In this case this would be a deal-breaker. e.g. test <-structure(list(value = c(3, 5, 3, 3, 6, 4, 5, 4, 6, 4, 6, 4, 4, 6, 5, 3, 3, 4, 4, 4, 3, 4, 4, 4, 3, 4, 5, 6, 6, 4, 3, 5, 4, 6, 5, 6, 4, 5, 5, 3, 4, 4, 6, 4, 4, 5, 5, 3, 4, 5, 8, 8, 8, 8, 9, 6, 6, 7, 6, 9), places = structure(c(1L, 2L, 1L, 1L, 1L, 2L, 1L, 2L, 1L, 2L, 1L, 2L, 2L, 2L, 2L, 2L, 1L, 1L, 2L, 2L, 2L, 1L, 2L, 1L, 1L, 1L, 1L, 2L, 1L, 2L, 1L, 2L, 2L, 2L, 1L, 2L, 1L, 2L, 2L, 1L, 1L, 2L, 2L, 1L, 1L, 1L, 1L, 2L, 1L, 1L, 2L, 2L, 2L, 1L, 1L, 2L, 2L, 1L, 2L, 1L), .Label = c("a", "b"), class = "factor")), .Names = c("value", "places"), row.names = c(NA, -60L), class = "data.frame") ggplot(test, aes(x=places,y=value))+geom_boxplot() Here there are two outliers at ("a",9) - but only one "dot" shown. So my question: How to jitter the outliers. And - what kind of display would you suggest for this kind of data?

    Read the article

  • What are some programming techniques for converting SD images to HD images

    - by Dr Dork
    I'm taking programming class and instructor loves to work with images so most of our assignments involve manipulating raw RGB image data. One of our assignments is to implement a standard image converter that converts SD images to HD images and vice versa. I always take advantage of these types of assignments to go a little beyond what we were asked to do, so I added a basic anti-aliasing process that uses the average pixel color of the 3x3 surrounding pixels to improve the converted image. While it helps a bit, the resulting image still doesn't look good, which is ok because it's not expected to for the assignment. I've learned that converting an SD to HD images has shown to be much harder than down sampling to SD from HD just because SD to HD effectively involves increasing resolution when it is not there. Obviously, it is hard to create pixels from nothing, but I'd like enhance my anti-aliasing to something that provides better results when upscaling an image. Most of the techniques I find and read on the internet are far beyond my level of image processing and programming. Can anybody suggest any better methods or processes to create good HD content from SD content that may be within my programming skill level? I know that's a difficult thing to gauge since you don't know me, but perhaps knowing that I can write c++ code to read in raw RGB data and upscale/downscale it with simple average-anti-aliasing will give you an idea. Thanks in advance for all your help!

    Read the article

  • Which single IoC/DI container would you recommend using and why?

    - by Rob G
    I'm asking this question because it's a good way to gauge how the community at large feels about the various containers/frameworks and why. Also, whilst my expertise may lie in .Net development, I am very interested in which frameworks are popular (and why) in other languages. If I feel the need to start digging into Java for instance, then I'd like to hit the ground running with good (comfortable) knowledge that I'm starting in the right direction. Does Ruby even need one with all its magnificent dynamicism? I have my own opinions on the .Net front, and will probably add my own personal favourite in an answer below, but I'm interested in all languages and opinions here. With all that in mind, could you please state only one IoC/DI framework that you use and recommend with the language of choice (Java/Ruby/.Net/Smalltalk etc.) and your reasoning for your choice, and if someone has already answered your particular flavour, then you can just vote it up and add comments to it so that anyone looking for advice in future and see which frameworks are more than likely to work for them once they read your reasoning. I'm hoping that over time, the best ones will bubble up to the top. I realise that this question doesn't have only one correct answer, so I won't be choosing one - the community will decide which framework gets the most votes and why. Of course, if you really feel strongly opposed to a particular brand, you could take the reputation hit and vote it down too, and this question can serve as a true wiki-style entry for research into this field. Remember, only one IoC per answer you write please - if you feel the need to promote two frameworks, then write two answers with your reasoning inside for each choice - then others in the community can agree or disagree with you.

    Read the article

  • What is the the relation between programming and mathematics?

    - by Math Grad
    Programmers seem to think that their work is quite mathematical. I understand this when you try to optimize something in performance, find the most efficient alogithm, etc.. But it patently seems false when you look at a billing application for a shop, or a systems software riddled with I/O calls. So what is it exactly? Is computation and associated programming really mathematical? Here I have in mind particularly the words of the philosopher Schopenhauer in mind: That arithmetic is the basest of all mental activities is proved by the fact that it is the only one that can be accomplished by means of a machine. Take, for instance, the reckoning machines that are so commonly used in England at the present time, and solely for the sake of convenience. But all analysis finitorum et infinitorum is fundamentally based on calculation. Therefore we may gauge the “profound sense of the mathematician,” of whom Lichtenberg has made fun, in that he says: “These so-called professors of mathematics have taken advantage of the ingenuousness of other people, have attained the credit of possessing profound sense, which strongly resembles the theologians’ profound sense of their own holiness.” I lifted the above quote from here. It seems that programmers are doing precisely the sort of mechanized base mental activity the grand old man is contemptuous about. So what exactly is the deal? Is programming really the "good" kind of mathematics, or just the baser type, or altogether something else just meant for business not to be confused with a pure discipline?

    Read the article

  • Jenkins: Accessed denied after turning on global security. How to revert?

    - by serverFaulter
    Need help figuring this one out. How can I fix this issue? I think I enabled global security and saw this error immediately. (while accessing localhost:8080 I get the following...) A problem occurred while processing the request. Please check our bug tracker to see if a similar problem has already been reported. If it is already reported, please vote and put a comment on it to let us gauge the impact of the problem. If you think this is a new issue, please file a new issue. When you file an issue, make sure to add the entire stack trace, along with the version of Jenkins and relevant plugins. The users list might be also useful in understanding what has happened. Stack trace hudson.security.AccessDeniedException2: anonymous is missing the Overall/Read permission at hudson.security.ACL.checkPermission(ACL.java:54) at hudson.model.Node.checkPermission(Node.java:418) at jenkins.model.Jenkins.getTarget(Jenkins.java:3658) at org.kohsuke.stapler.Stapler.tryInvoke(Stapler.java:656) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:858) at org.kohsuke.stapler.Stapler.invoke(Stapler.java:631) at org.kohsuke.stapler.Stapler.service(Stapler.java:225) at javax.servlet.http.HttpServlet.service(HttpServlet.java:848) at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:686) at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1494) at hudson.util.PluginServletFilter$1.doFilter(PluginServletFilter.java:96) at hudson.util.PluginServletFilter.doFilter(PluginServletFilter.java:88) at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1482) at hudson.security.csrf.CrumbFilter.doFilter(CrumbFilter.java:48) at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1482) at hudson.security.ChainedServletFilter$1.doFilter(ChainedServletFilter.java:84) at hudson.security.ChainedServletFilter.doFilter(ChainedServletFilter.java:76) at hudson.security.HudsonFilter.doFilter(HudsonFilter.java:164) at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1482) at org.kohsuke.stapler.compression.CompressionFilter.doFilter(CompressionFilter.java:46) at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1482) at hudson.util.CharacterEncodingFilter.doFilter(CharacterEncodingFilter.java:81) at org.eclipse.jetty.servlet.ServletHandler$CachedChain.doFilter(ServletHandler.java:1474) at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:499) at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:137) at org.eclipse.jetty.security.SecurityHandler.handle(SecurityHandler.java:533) at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:231) at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:1086) at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:428) at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:193) at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:1020) at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:135) at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:116) at org.eclipse.jetty.server.Server.handle(Server.java:370) at org.eclipse.jetty.server.AbstractHttpConnection.handleRequest(AbstractHttpConnection.java:489) at org.eclipse.jetty.server.AbstractHttpConnection.headerComplete(AbstractHttpConnection.java:949) at org.eclipse.jetty.server.AbstractHttpConnection$RequestHandler.headerComplete(AbstractHttpConnection.java:1011) at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:644) at org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:235) at org.eclipse.jetty.server.AsyncHttpConnection.handle(AsyncHttpConnection.java:82) at org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:668) at org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:52) at winstone.BoundedExecutorService$1.run(BoundedExecutorService.java:77) at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:895) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:918) at java.lang.Thread.run(Thread.java:695)

    Read the article

  • How to Answer a Stupid Interview Question the Right Way

    - by AjarnMark
    Have you ever been asked a stupid question during an interview; one that seemed to have no relation to the job responsibilities at all?  Tech people are often caught off-guard by these apparently irrelevant questions, but there is a way you can turn these to your favor.  Here is one idea. While chatting with a couple of folks between sessions at SQLSaturday 43 last weekend, one of them expressed frustration over a seemingly ridiculous and trivial question that she was asked during an interview, and she believes it cost her the job opportunity.  The question, as I remember it being described was, “What is the largest byte measurement?”.  The candidate made up a guess (“zetabyte”) during the interview, which is actually closer than she may have realized.  According to Wikipedia, there is a measurement known as zettabyte which is 10^21, and the largest one listed there is yottabyte at 10^24. My first reaction to this question was, “That’s just a hiring manager that doesn’t really know what they’re looking for in a candidate.  Furthermore, this tells me that this manager really does not understand how to build a team.”  In most companies, team interaction is more important than uber-knowledge.  I didn’t ask, but this could also be another geek on the team trying to establish their Alpha-Geek stature.  I suppose that there are a few, very few, companies that can build their businesses on hiring only the extreme alpha-geeks, but that certainly does not represent the majority of businesses in America. My friend who was there suggested that the appropriate response to this silly question would be, “And how does this apply to the work I will be doing?” Of course this is an understandable response when you’re frustrated because you know you can handle the technical aspects of the job, and it seems like the interviewer is just being silly.  But it is also a direct challenge, which may not be the best approach in interviewing.  I do have to admit, though, that there are those folks who just won’t respect you until you do challenge them, but again, I don’t think that is the majority. So after some thought, here is my suggestion: “Well, I know that there are petabytes and exabytes and things even larger than that, but I haven’t been keeping up on my list of Greek prefixes that have not yet been used, so I would have to look up the exact answer if you need it.  However, I have worked with databases as large as 30 Terabytes.  How big are the largest databases here at X Corporation?”  Perhaps with a follow-up of, “Typically, what I have seen in companies that have databases of your size, is that the three biggest challenges they face are: A, B, and C.  What would you say are the top 3 concerns that you would like the person you hire to be able to address?…Here is how I have dealt with those concerns in the past (or ‘Here is how I would tackle those issues for you…’).” Wait! What just happened?!  We took a seemingly irrelevant and frustrating question and turned it around into an opportunity to highlight our relevant skills and guide the conversation back in a direction more to our liking and benefit.  In more generic terms, here is what we did: Admit that you don’t know the specific answer off the top of your head, but can get it if it’s truly important to the company. Maybe for some reason it really is important to them. Mention something similar or related that you do know, reassuring them that you do have some knowledge in that subject area. Draw a parallel to your past work experience. Ask follow-up questions about the company’s specific needs and discuss how you can fulfill those. This type of thing requires practice and some forethought.  I didn’t come up with this answer until a day later, which is too late when you’re interviewing.  I still think it is silly for an interviewer to ask something like that, but at least this is one way to spin it to your advantage while you consider whether you really want to work for someone who would ask a thing like that.  Remember, interviewing is a two-way process.  You’re deciding whether you want to work there just as much as they are deciding whether they want you. There is always the possibility that this was a calculated maneuver on the part of the hiring manager just to see how quickly you think on your feet and how you handle stupid questions.  Maybe he knows something about the work environment and he’s trying to gauge whether you’ll actually fit in okay.  And if that’s the case, then the above response still works quite well.

    Read the article

  • PASS: Board Q&amp;A at the Summit

    - by Bill Graziano
    The last two years we’ve put the Board in front of the members and taken questions.  We’re going to do that again this year.  It will be in Room 307/308 from 12:15 to 1:30 on Friday. Yes, this time overlaps with the Birds of a Feather Lunch and the start of afternoon sessions – but only partially.  You can attend the Q&A and still get to parts of both of those.  There just isn’t a great time to do this.  Every time overlaps with something. We can’t do it after the last session on Friday.  We can’t fit it between the last session and the evening events on Wednesday or Thursday.  We had some discussion around breakfast time but I didn’t think that was realistic.  This is the least bad time we could come up with. Last year we had 60-70 people attend.  These are the items that were specific things that I could work on: The first question was whether to increase transparency around individual votes of Board members.  We approved this at the Board meeting the following day.  The only caveat was that if the Board is given confidential information as a basis for their vote then we may not be able to disclose individual votes.  Putting a Director in a position where they can’t publicly defend the reason for their vote is a difficult situation.  Thanks Kendal! Can we have a Board member discretionary fund?  As background, I took a couple of people to lunch so we could have a quiet place to talk.  I bought lunch but wasn’t able to expense it back to PASS.  We just don’t have a budget item for things like this.  I think we should.  I would guess the entire Board would like it also.  It was in an earlier version of the budget but came out as part of a cost-cutting move to balance the budget.  I’d like to see it added back in but we’ll have to see. I know there were a comments about the elections.  At this point we had created the Election Review Committee.  I’ve already written at length about this process. Where does IT work go?  PASS started to publish our internal management reports starting in December 2010.  You can find them on our Governance page.  These aren’t filtered at all and include a variety of information about IT projects.  The most recent update had roughly a page of updates related to IT.  Lots of the work was related to Summit and the Orator tool that we use to manage speaker submissions. There were numerous requests that Tina Turner not be repeated.  Done.  I don’t think we’ll do anything quite like that again.  We had a request for a payment plan for Summit.  We looked into this briefly but didn’t take any action.  We didn’t think the effort was worth the small number of people that would use it.  If you disagree, submit this on our Summit Feedback site and get some votes. There were lots of suggestions around the first-timers events – especially from first timers.  You can find all our current activities related to first-timers at the First Timers page on the Summit web site.  Plus links to 34 (!) blog posts on suggestions for first-timers.  And a big THANK YOU to Confio and Red Gate for sponsoring this. I hope you get the chance to attend.  These events are very helpful to me as a Board member.  I like being able to look around the room as comments are being made and see the audience reaction.  It helps me gauge the interest in an idea. I’d also like to direct you to the Summit Feedback site.  You can submit and vote on ideas to make the Summit a better experience.  As of right now we have the suggestions from last year still up.  We may reset these prior to the Summit though.

    Read the article

  • Highlights from the Oracle Customer Experience Summit @ OpenWorld

    - by Kathryn Perry
    A guest post by David Vap, Group Vice President, Oracle Applications Product Development The Oracle Customer Experience Summit was the first-ever event covering the full breadth of Oracle's CX portfolio -- Marketing, Sales, Commerce, and Service. The purpose of the Summit was to articulate the customer experience imperative and to showcase the suite of Oracle products that can help our customers create the best possible customer experience. This topic has always been a very important one, but now that there are so many alternative companies to do business with and because people have such public ways to voice their displeasure, it's necessary for vendors to have multiple listening posts in place to gauge consumer sentiment. They need to know what is going on in real time and be able to react quickly to turn negative situations into positive ones. Those can then be shared in a social manner to enhance the brand and turn the customer into a repeat customer. The Summit was focused on Oracle's portfolio of products and entirely dedicated to customers who are committed to building great customer experiences within their businesses. Rather than DBAs, the attendees were business people looking to collaborate with other like-minded experts and find out how Oracle can help in terms of technology, best practices, and expertise. The event was at the Westin St. Francis Hotel in San Francisco as part of Oracle OpenWorld. We had eight hundred people attend, which was great for the first year. Next year, there's no doubt in my mind, we can raise that number to 5,000. Alignment and Logic Oracle's Customer Experience portfolio is made up of a combination of acquired and organic products owned by many people who are new to Oracle. We include homegrown Fusion CRM, as well as RightNow, Inquira, OPA, Vitrue, ATG, Endeca, and many others. The attendees knew of the acquisitions, so naturally they wanted to see how the products all fit together and hear the logic behind the portfolio. To tell them about our alignment, we needed to be aligned. To accomplish that, a cross functional team at Oracle agreed on the messaging so that every single Oracle presenter could cover the big picture before going deep into a product or topic. Talking about the full suite of products in one session produced overflow value for other products. And even though this internal coordination was a huge effort, everyone saw the value for our customers and for our long-term cooperation and success. Keynotes, Workshops, and Tents of Innovation We scored by having Seth Godin as our keynote speaker ? always provocative and popular. The opening keynote was a session orchestrated by Mark Hurd, Anthony Lye, and me. Mark set the stage by giving real-world examples of bad customer experiences, Anthony clearly articulated the business imperative for addressing these experiences, and I brought it all to life by taking the audience around the Customer Lifecycle and showing demos and videos, with partners included at each of the stops around the lifecycle. Brian Curran, a VP for RightNow Product Strategy, presented a session that was in high demand called The Economics of Customer Experience. People loved hearing how to build a business case and justify the cost of building a better customer experience. John Kembel, another VP for RightNow Product Strategy, held a workshop that customers raved about. It was based on the journey mapping methodology he created, which is a way to talk to customers about where they want to make improvements to their customers' experiences. He divided the audience into groups led by facilitators. Each person had the opportunity to engage with experts and peers and construct some real takeaways. From left to right: Brian Curran, John Kembel, Seth Godin, and George Kembel The conference hotel was across from Union Square so we used that space to set up Innovation Tents. During the day we served lunch in the tents and partners showed their different innovative ideas. It was very interesting to see all the technologies and advancements. It also gave people a place to mix and mingle and to think about the fringe of where we could all take these ideas. Product Portfolio Plus Thought Leadership Of course there is always room for improvement, but the feedback on the format of the conference was positive. Ninety percent of the sessions had either a partner or a customer teamed with an Oracle presenter. The presentations weren't dry, one-way information dumps, but more interactive. I just followed up with a CEO who attended the conference with his Head of Marketing. He told me that they are using John Kembel's journey mapping methodology across the organization to pull people together. This sort of thought leadership in these highly competitive areas gives Oracle permission to engage around the technology. We have to differentiate ourselves and it's harder to do on the product side because everyone looks the same on paper. But on thought leadership ? we can, and did, take some really big steps. David VapGroup Vice PresidentOracle Applications Product Development

    Read the article

  • Highlights from the Oracle Customer Experience Summit @ OpenWorld

    - by Richard Lefebvre
    The Oracle Customer Experience Summit was the first-ever event covering the full breadth of Oracle's CX portfolio -- Marketing, Sales, Commerce, and Service. The purpose of the Summit was to articulate the customer experience imperative and to showcase the suite of Oracle products that can help our customers create the best possible customer experience. This topic has always been a very important one, but now that there are so many alternative companies to do business with and because people have such public ways to voice their displeasure, it's necessary for vendors to have multiple listening posts in place to gauge consumer sentiment. They need to know what is going on in real time and be able to react quickly to turn negative situations into positive ones. Those can then be shared in a social manner to enhance the brand and turn the customer into a repeat customer. The Summit was focused on Oracle's portfolio of products and entirely dedicated to customers who are committed to building great customer experiences within their businesses. Rather than DBAs, the attendees were business people looking to collaborate with other like-minded experts and find out how Oracle can help in terms of technology, best practices, and expertise. The event was at the Westin St. Francis Hotel in San Francisco as part of Oracle OpenWorld. We had eight hundred people attend, which was great for the first year. Next year, there's no doubt in my mind, we can raise that number to 5,000. Alignment and Logic Oracle's Customer Experience portfolio is made up of a combination of acquired and organic products owned by many people who are new to Oracle. We include homegrown Fusion CRM, as well as RightNow, Inquira, OPA, Vitrue, ATG, Endeca, and many others. The attendees knew of the acquisitions, so naturally they wanted to see how the products all fit together and hear the logic behind the portfolio. To tell them about our alignment, we needed to be aligned. To accomplish that, a cross functional team at Oracle agreed on the messaging so that every single Oracle presenter could cover the big picture before going deep into a product or topic. Talking about the full suite of products in one session produced overflow value for other products. And even though this internal coordination was a huge effort, everyone saw the value for our customers and for our long-term cooperation and success. Keynotes, Workshops, and Tents of Innovation We scored by having Seth Godin as our keynote speaker ? always provocative and popular. The opening keynote was a session orchestrated by Mark Hurd, Anthony Lye, and me. Mark set the stage by giving real-world examples of bad customer experiences, Anthony clearly articulated the business imperative for addressing these experiences, and I brought it all to life by taking the audience around the Customer Lifecycle and showing demos and videos, with partners included at each of the stops around the lifecycle. Brian Curran, a VP for RightNow Product Strategy, presented a session that was in high demand called The Economics of Customer Experience. People loved hearing how to build a business case and justify the cost of building a better customer experience. John Kembel, another VP for RightNow Product Strategy, held a workshop that customers raved about. It was based on the journey mapping methodology he created, which is a way to talk to customers about where they want to make improvements to their customers' experiences. He divided the audience into groups led by facilitators. Each person had the opportunity to engage with experts and peers and construct some real takeaways. The conference hotel was across from Union Square so we used that space to set up Innovation Tents. During the day we served lunch in the tents and partners showed their different innovative ideas. It was very interesting to see all the technologies and advancements. It also gave people a place to mix and mingle and to think about the fringe of where we could all take these ideas. Product Portfolio Plus Thought Leadership Of course there is always room for improvement, but the feedback on the format of the conference was positive. Ninety percent of the sessions had either a partner or a customer teamed with an Oracle presenter. The presentations weren't dry, one-way information dumps, but more interactive. I just followed up with a CEO who attended the conference with his Head of Marketing. He told me that they are using John Kembel's journey mapping methodology across the organization to pull people together. This sort of thought leadership in these highly competitive areas gives Oracle permission to engage around the technology. We have to differentiate ourselves and it's harder to do on the product side because everyone looks the same on paper. But on thought leadership ? we can, and did, take some really big steps. David Vap Group Vice President Oracle Applications Product Development

    Read the article

  • Getting Started with ADF Mobile Sample Apps

    - by Denis T
    Getting Started with ADF Mobile Sample Apps   Installation Steps Install JDeveloper 11.1.2.3.0 from Oracle Technology Network After installing JDeveloper, go to Help menu and select "Check For Updates" and find the ADF Mobile extension and install this. It will require you restart JDeveloper For iOS development, be on a Mac and have Xcode installed. (Currently only Xcode 4.4 is officially supported. Xcode 4.5 support is coming soon) For Android development, have the Android SDK installed. In the JDeveloper Tools menu, select "Preferences". In the Preferences dialog, select ADF Mobile. You can expand it to select configure your Platform preferences for things like the location of Xcode and the Android SDK. In your /jdeveloper/jdev/extensions/oracle.adf.mobile/Samples folder you will find a PublicSamples.zip. Unzip this into the Samples folder so you have all the projects ready to go. Open each of the sample application's .JWS file to open the corresponding workspace. Then from the "Application" menu, select "Deploy" and then select the deployment profile for the platform you wish to deploy to. Try deploying to the simulator/emulator on each platform first because it won't require signing. Note: If you wish to deploy to the Android emulator, it must be running before you start the deployment.   Sample Application Details   Recommended Order of Use Application Name Description 1 HelloWorld The "hello world" application for ADF Mobile, which demonstrates the basic structure of the framework. This basic application has a single application feature that is implemented with a local HTML file. Use this application to ascertain that the development environment is set up correctly to compile and deploy an application. See also Section 4.2.2, "What Happens When You Create an ADF Mobile Application." 2 CompGallery This application is meant to be a runtime application and not necessarily to review the code, though that is available. It serves as an introduction to the ADF Mobile AMX UI components by demonstrating all of these components. Using this application, you can change the attributes of these components at runtime and see the effects of those changes in real time without recompiling and redeploying the application after each change. See generally Chapter 8, "Creating ADF Mobile AMX User Interface." 3 LayoutDemo This application demonstrates the user interface layout and shows how to create the various list and button styles that are commonly used in mobile applications. It also demonstrates how to create the action sheet style of a popup component and how to use various chart and gauge components. See Section 8.3, "Creating and Using UI Components" and Section 8.5, "Providing Data Visualization." Note: This application must be opened from the Samples directory or the Default springboard option must be cleared in the Applications page of the adfmf-application.xml overview editor, then selected again. 4 JavaDemo This application demonstrates how to bind the user interface to Java beans. It also demonstrates how to invoke EL bindings from the Java layer using the supplied utility classes. See also Section 8.10, "Using Event Listeners" and Section 9.2, "Understanding EL Support." 5 Navigation This application demonstrates the various navigation techniques in ADF Mobile, including bounded task flows and routers. It also demonstrates the various page transitions. See also Section 7.2, "Creating Task Flows." Note: This application must be opened from the Samples directory or the Default springboard option must be cleared in the Applications page of the adfmf-application.xml overview editor, then selected again. 6 LifecycleEvents This application implements lifecycle event handlers on the ADF Mobile application itself and its embedded application features. This application shows you where to insert code to enable the applications to perform their own logic at certain points in the lifecycle. See also Section 5.6, "About Lifecycle Event Listeners." Note: iOS, the LifecycleEvents sample application logs data to the Console application, located at Applications-Utilities-Console application. 7 DeviceDemo This application shows you how to use the DeviceFeatures data control to expose such device features as geolocation, e-mail, SMS, and contacts, as well as how to query the device for its properties. See also Section 9.5, "Using the DeviceFeatures Data Control." Note: You must also run this application on an actual device because SMS and some of the device properties do not function on an iOS simulator or Android emulator. 8 GestureDemo This application demonstrates how gestures can be implemented and used in ADF Mobile applications. See also Section 8.4, "Enabling Gestures." 9 StockTracker This application demonstrates how data change events use Java to enable data changes to be reflected in the user interface. It also has a variety of layout use cases, gestures and basic mobile patterns. See also Section 9.7, "Data Change Events."

    Read the article

  • Do you still limit line length in code?

    - by Noldorin
    This is a matter on which I would like to gauge the opinion of the community: Do you still limit the length of lines of code to a fixed maximum? This was certainly a convention of the past for many languages; one would typically cap the number of characters per line to a value such as 80 (and more recnetly 100 or 120 I believe). As far as I understand, the primary reasons for limiting line length are: Readability - You don't have to scroll over horizontally when you want to see the end of some lines. Printing - Admittedly (at least in my experience), most code that you are working on does not get printed out on paper, but by limiting the number of characters you can insure that formatting doesn't get messed up when printed. Past editors (?) - Not sure about this one, but I suspect that at some point in the distant past of programming, (at least some) text editors may have been based on a fixed-width buffer. I'm sure there are points that I am still missing out, so feel free to add to these... Now, when I tend to observe C or C# code nowadays, I often see a number of different styles, the main ones being: Line length capped to 80, 100, or even 120 characters. As far as I understand, 80 is the traditional length, but the longer ones of 100 and 120 have appeared because of the widespread use of high resolutions and widescreen monitors nowadays. No line length capping at all. This tends to be pretty horrible to read, and I don't see it too often, though it's certainly not too rare either. Inconsistent capping of line length. The length of some lines are limited to a fixed maximum (or even a maximum that changes depending on the file/location in code), while others (possibly comments) are not at all. My personal preference here (at least recently) has been to cap the line length to 100 in the Visual Studio editor. This means that in a decently sized window (on a non-widescreen monitor), the ends of lines are still fully visible. I can however see a few disadvantages in this, especially when you end up writing code that's indented 3 or 4 levels and then having to include a long string literal - though I often take this as a sign to refactor my code! In particular, I am curious what the C and C# coders (or anyone who uses Visual Studio for that matter) think about this point, though I would be interested in hearing anyone's thoughts on the subject. Edit Thanks for the all answers - I appreciate the variety of opinions here, all presenting sound reasons. Consensus does seem to be tipping in the direction of always (or almost always) limit the line length. Interestingly, it seems to be in various coding standards to limit the line length. Judging by some of the answers, both the Python and Google CPP guidelines set the limit at 80 chars. I haven't seen anything similar regarding C# or VB.NET, but I would be curious to see if there are ones anywhere.

    Read the article

  • JMX Based Monitoring - Part Four - Business App Server Monitoring

    - by Anthony Shorten
    In the last blog entry I talked about the Oracle Utilities Application Framework V4 feature for monitoring and managing aspects of the Web Application Server using JMX. In this blog entry I am going to discuss a similar new feature that allows JMX to be used for management and monitoring the Oracle Utilities business application server component. This feature is primarily focussed on performance tracking of the product. In first release of Oracle Utilities Customer Care And Billing (V1.x I am talking about), we used to use Oracle Tuxedo as part of the architecture. In Oracle Utilities Application Framework V2.0 and above, we removed Tuxedo from the architecture. One of the features that some customers used within Tuxedo was the performance tracking ability. The idea was that you enabled performance logging on the individual Tuxedo servers and then used a utility named txrpt to produce a performance report. This report would list every service called, the number of times it was called and the average response time. When I worked a performance consultant, I used this report to identify badly performing services and also gauge the overall performance characteristics of a site. When Tuxedo was removed from the architecture this information was also lost. While you can get some information from access.log and some Mbeans supplied by the Web Application Server it was not at the same granularity as txrpt or as useful. I am happy to say we have not only reintroduced this facility in Oracle Utilities Application Framework but it is now accessible via JMX and also we have added more detail into the performance tracking. Most of this new design was working with customers around the world to make sure we introduced a new feature that not only satisfied their performance tracking needs but allowed for finer grained performance analysis. As with the Web Application Server, the Business Application Server JMX monitoring is enabled by specifying a JMX port number in RMI Port number for JMX Business and initial credentials in the JMX Enablement System User ID and JMX Enablement System Password configuration options. These options are available using the configureEnv[.sh] -a utility. These credentials are shared across the Web Application Server and Business Application Server for authorization purposes. Once this is information is supplied a number of configuration files are built (by the initialSetup[.sh] utility) to configure the facility: spl.properties - contains the JMX URL, the security configuration and the mbeans that are enabled. For example, on my demonstration machine: spl.runtime.management.rmi.port=6750 spl.runtime.management.connector.url.default=service:jmx:rmi:///jndi/rmi://localhost:6750/oracle/ouaf/ejbAppConnector jmx.remote.x.password.file=scripts/ouaf.jmx.password.file jmx.remote.x.access.file=scripts/ouaf.jmx.access.file ouaf.jmx.com.splwg.ejb.service.management.PerformanceStatistics=enabled ouaf.jmx.* files - contain the userid and password. The default configuration uses the JMX default configuration. You can use additional security features by altering the spl.properties file manually or using a custom template. For more security options see JMX Security for more details. Once it has been configured and the changes reflected in the product using the initialSetup[.sh] utility the JMX facility can be used. For illustrative purposes I will use jconsole but any JSR160 complaint browser or client can be used (with the appropriate configuration). Once you start jconsole (ensure that splenviron[.sh] is executed prior to execution to set the environment variables or for remote connection, ensure java is in your path and jconsole.jar in your classpath) you specify the URL in the spl.runtime.management.connnector.url.default entry. For example: You are then able to track performance of the product using the PerformanceStatistics Mbean. The attributes of the PerformanceStatistics Mbean are counts of each object type. This is where this facility differs from txrpt. The information that is collected includes the following: The Service Type is captured so you can filter the results in terms of the type of service. For maintenance type services you can even see the transaction type (ADD, CHANGE etc) so you can see the performance of updates against read transactions. The Minimum and Maximum are also collected to give you an idea of the spread of performance. The last call is recorded. The date, time and user of the last call are recorded to give you an idea of the timeliness of the data. The Mbean maintains a set of counters per Service Type to give you a summary of the types of transactions being executed. This gives you an overall picture of the types of transactions and volumes at your site. There are a number of interesting operations that can also be performed: reset - This resets the statistics back to zero. This is an important operation. For example, txrpt is restricted to collecting statistics per hour, which is ok for most people. But what if you wanted to be more granular? This operation allows to set the collection period to anything you wish. The statistics collected will represent values since the last restart or last reset. completeExecutionDump - This is the operation that produces a CSV in memory to allow extraction of the data. All the statistics are extracted (see the Server Administration Guide for a full list). This can be then loaded into a database, a tool or simply into your favourite spreadsheet for analysis. Here is an extract of an execution dump from my demonstration environment to give you an idea of the format: ServiceName, ServiceType, MinTime, MaxTime, Avg Time, # of Calls, Latest Time, Latest Date, Latest User ... CFLZLOUL, EXECUTE_LIST, 15.0, 64.0, 22.2, 10, 16.0, 2009-12-16::11-25-36-932, ASHORTEN CILBBLLP, READ, 106.0, 1184.0, 466.3333333333333, 6, 106.0, 2009-12-16::11-39-01-645, BOBAMA CILBBLLP, DELETE, 70.0, 146.0, 108.0, 2, 70.0, 2009-12-15::12-53-58-280, BPAYS CILBBLLP, ADD, 860.0, 4903.0, 2243.5, 8, 860.0, 2009-12-16::17-54-23-862, LELLISON CILBBLLP, CHANGE, 112.0, 3410.0, 815.1666666666666, 12, 112.0, 2009-12-16::11-40-01-103, ASHORTEN CILBCBAL, EXECUTE_LIST, 8.0, 84.0, 26.0, 22, 23.0, 2009-12-16::17-54-01-643, LJACKMAN InitializeUserInfoService, READ_SYSTEM, 49.0, 962.0, 70.83777777777777, 450, 63.0, 2010-02-25::11-21-21-667, ASHORTEN InitializeUserService, READ_SYSTEM, 130.0, 2835.0, 234.85777777777778, 450, 216.0, 2010-02-25::11-21-21-446, ASHORTEN MenuLoginService, READ_SYSTEM, 530.0, 1186.0, 703.3333333333334, 9, 530.0, 2009-12-16::16-39-31-172, ASHORTEN NavigationOptionDescriptionService, READ_SYSTEM, 2.0, 7.0, 4.0, 8, 2.0, 2009-12-21::09-46-46-892, ASHORTEN ... There are other operations and attributes available. Refer to the Server Administration Guide provided with your product to understand the full et of operations and attributes. This is one of the many features I am proud that we implemented as it allows flexible monitoring of the performance of the product.

    Read the article

  • How to Organize a Programming Language Club

    - by Ben Griswold
    I previously noted that we started a language club at work.  You know, I searched around but I couldn’t find a copy of the How to Organize a Programming Language Club Handbook. Maybe it’s sold out?  Yes, Stack Overflow has quite a bit of information on how to learn and teach new languages and there’s also a good number of online tutorials which provide language introductions but I was interested in group learning.  After   two months of meetings, I present to you the Unofficial How to Organize a Programming Language Club Handbook.  1. Gauge interest. Start by surveying prospects. “Excuse me, smart-developer-whom-I-work-with-and-I-think-might-be-interested-in-learning-a-new-coding-language-with-me. Are you interested in learning a new language with me?” If you’re lucky, you work with a bunch of really smart folks who aren’t shy about teaching/learning in a group setting and you’ll have a collective interest in no time.  Simply suggesting the idea is the only effort required.  If you don’t work in this type of environment, maybe you should consider a new place of employment.  2. Make it official. Send out a “Welcome to the Club” email: There’s been talk of folks itching to learn new languages – Python, Scala, F# and Haskell to name a few.  Rather than taking on new languages alone, let’s learn in the open.  That’s right.  Let’s start a languages club.  We’ll have everything a real club needs – secret handshake, goofy motto and a high-and-mighty sense that we’re better than everybody else. T-shirts?  Hell YES!  Anyway, I’ve thrown this idea around the office and no one has laughed at me yet so please consider this your very official invitation to be in THE club. [Insert your ideas about how the club might be run, solicit feedback and suggestions, ask what other folks would like to get out the club, comment about club hazing practices and talk up the T-shirts even more. Finally, call out the languages you are interested in learning and ask the group for their list.] 3.  Send out invitations to the first meeting.  Don’t skimp!  Hallmark greeting cards for everyone.  Personalized.  Hearts over the I’s and everything.  Oh, and be sure to include the list of suggested languages with vote count.  Here the list of languages we are interested in: Python 5 Ruby 4 Objective-C 3 F# 2 Haskell 2 Scala 2 Ada 1 Boo 1 C# 1 Clojure 1 Erlang 1 Go 1 Pi 1 Prolog 1 Qt 1 4.  At the first meeting, there must be cake.  Lots of cake. And you should tackle some very important questions: Which language should we start with?  You can immediately go with the top vote getter or you could do as we did and designate each person to provide a high-level review of each of the proposed languages over the next two weeks.  After all presentations are completed, vote on the language. Our high-level review consisted of answers to a series of questions. Decide how often and where the group will meet.  We, for example, meet for a brown bag lunch every Wednesday.  Decide how you’re going to learn.  We determined that the best way to learn is to just dive in and write code.  After choosing our first language (Python), we talked about building an application, or performing coding katas, but we ultimately choose to complete a series of Project Euler problems.  We kept it simple – each member works out the same two problems each week in preparation of a code review the following Wednesday. 5.  Code, Review, Learn.  Prior to the weekly meeting, everyone uploads their solutions to our internal wiki.  Each Project Euler problem has a dedicated page.  In the meeting, we use a really fancy HD projector to show off each member’s solution.  It is very important to use an HD projector.  Again, don’t skimp!  Each code author speaks to their solution, everyone else comments, applauds, points fingers and laughs, etc.  As much as I’ve learned from solving the problems on my own, I’ve learned at least twice as much at the group code review.  6.  Rinse. Lather. Repeat.  We’ve hosted the language club for 7 weeks now.  The first meeting just set the stage.  The next two meetings provided a review of the languages followed by a first language selection.  The remaining meetings focused on Python and Project Euler problems.  Today we took a vote as to whether or not we’re ready to switch to another language and/or another problem set.  Pretty much everyone wants to stay the course for a few more weeks at least.  Until then, we’ll continue to code the next two solutions, review and learn. Again, we’ve been having a good time with the programming language club.  I’m glad it got off the ground.  What do you think?  Would you be interested in a language club?  Any suggestions on what we might do better?

    Read the article

  • Massive Silverlight Giveaway! DevExpress , Syncfusion, Crypto Obfuscator and SL Spy!

    - by mbcrump
    Oh my, have we grown! Maybe I should change the name to Multiple Silverlight Giveaways. So far, my Silverlight giveaways have been such a success that I’m going to be able to give away more than one Silverlight product every month. Last month, we gave away 3 great products. 1) ComponentOne Silverlight Controls 2)  ComponentOne XAP Optimizer (with obfuscation) and 3) Silverlight Spy. This month, we will give away 4 great Silverlight products and have 4 different winners. This way the Silverlight community can grow with more than just one person winning all the prizes. This month we will be giving away: DevExpress Silverlight Controls – Over 50+ Silverlight Controls Syncfusion User Interface Edition - Create stunning line of business silverlight applications with a wide range of components including a high performance grid, docking manager, chart, gauge, scheduler and much more. Crypto Obfuscator – Works for all .NET including Silverlight/Windows Phone 7. Silverlight Spy – provides a license EVERY month for this giveaway. ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of one of the products listed above! 4 winners will be announced on April 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. – Use Google Reader, email or whatever is best for you.  Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump . Register here: http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit each of the vendors sites because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- DevExpress Silverlight Controls Let’s take a quick look at some of the software that is provided in this giveaway. Before we get started with the Silverlight Controls, here is a couple of links to bookmark for the DevExpress Silverlight Controls: The Live Demos of the Silverlight Controls is located here. Great Video Tutorials of the Silverlight Controls are here. One thing that I liked about the DevExpress is how easy it was to find demos of each control. After you install the controls the following Program Group appears complete with “demos” that include full-source.   So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. The Book – Very rich animation between switching pages. Very easy to add your own images and custom text. The Menu – This is another control that just looked great. You can easily add images to the menu items with a few lines of XAML. The Window / Dialog Box – You can use this control to make a very beautiful “Wizard” to help your users navigate between pages. This is useful in setup or installation. Calculator – This would be useful for any type of Banking app. Also a first that I’ve seen from a 3rd party Control company. DatePicker – This controls feels a lot smoother than the one provided by Microsoft. It also provides the ability to “Clear” the selection. Overall the DevExpress Silverlight Controls feature a lot of quality controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. If you win the contest you can simply enter your registration key and continue using the product without reinstalling. Syncfusion User Interface Edition Before we get started with the Syncfusion User Interface Edition, here is a couple of links to bookmark. The Live Demos can be found here. You can download a demo of it now at http://www.syncfusion.com/downloads/evalstart. After you install the Syncfusion, you can view the dashboard to run locally installed samples. You may also download the documentation to your local machine if needed. Since the name of the package is “User Interface Edition”, I decided to share several samples that struck me as “awesome”. Dashboard Gauges – I was very impressed with the various gauges they have included. The digital clock also looks very impressive. Diagram – The diagrams are also very easy to build. In the sample project below you can drag/drop the shapes onto the content pane. More complex lines like the Bezier lines are also easy to create using Syncfusion. Scheduling – Another strong component was the Scheduling with built-in support for Themes. Tools – If all of that wasn’t enough, it also comes with a nice pack of essential tools. Syncfusion has a nice variety of Silverlight Controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. Crypto Obfuscator The following feature set is what is important to me in an Obfuscator since I am a Silverlight/WP7 Developer: And thankfully this is what you get in Crypto Obfuscator. You can download a trial version right now if you want to go ahead and play with it. Let’s spend a few moments taking a look at the application. After you have installed Crypto Obfuscator you will see the following screen: After you click on Assemblies you have the option to add your .XAP file in: I went ahead and loaded my .xap file from a Silverlight Application. At this point, you can simply save your project and hit “Obfuscate” and your done. You don’t have to mess with any of the other settings if you don’t want too. Of course, you can change the settings and add obfuscation rules, watermarks and signing if you wish.  After Obfuscation, it looks like this in .NET Reflector: I was trying to browse through methods and it actually crashed Reflector. This confirms the level of protection the obfuscator is providing. If this were a commercial application that my team built, I would have a huge smile on my face right now. Crypto Obfuscator is a great product and I hope you will spend the time learning more about it. Silverlight Spy Silverlight Spy is a runtime inspector tool that will tell you pretty much everything that is going on with the application. Basically, you give it a URL that contains a Silverlight application and you can explore the element tree, events, xaml and so much more. This has already been reviewed on MichaelCrump.net. _________________________________________________________________________________________ Thanks for reading and don’t forget to leave a comment below in order to win one of the four prizes available! Subscribe to my feed

    Read the article

  • Need help diagnosing network performance issues

    - by tokes
    I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

    Read the article

  • CodePlex Daily Summary for Wednesday, June 05, 2013

    CodePlex Daily Summary for Wednesday, June 05, 2013Popular ReleasesQlikView Extension - Animated Scatter Chart: Animated Scatter Chart - v1.0: Version 1.0 including Source Code qar File Example QlikView application Tested With: Browser Firefox 20 (x64) Google Chrome 27 (x64) Internet Explorer 9 QlikView QlikView Desktop 11 - SR2 (x64) QlikView Desktop 11.2 - SR1 (x64) QlikView Ajax Client 11.2 - SR2 (based on x64)BarbaTunnel: BarbaTunnel 7.2: Warning: HTTP Tunnel is not compatible with version 6.x and prior, HTTP packet format has been changed. Check Version History for more information about this release.Web Pages CMS: 0.5: First public releaseHarvester - Debug Viewer for Trace, NLog & Log4Net: v2.0.1 (.NET 4.0): Minor Updates Fixed incorrect process naming being displayed if process ID reassigned before cache invalidated. Fixed incorrect event type/source for TraceListener.TraceData methods. Updated NLog package references. Official Documentation Moved to GitHub http://cbaxter.github.com/Harvester Official Source Moved to GitHub https://github.com/cbaxter/HarvesterSuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.8: This release includes these changes below: Upgrade SuperSocket to 1.5.3 which is much more stable Added handshake request validating api (WebSocketServer.ValidateHandshake(TWebSocketSession session, string origin)) Fixed a bug that the m_Filters in the SubCommandBase can be null if the command's method LoadSubCommandFilters(IEnumerable<SubCommandFilterAttribute> globalFilters) is not invoked Fixed the compatibility issue on Origin getting in the different version protocols Marked ISub...Impulse Media Player: Impulse Media Player 3.3.1.0: EchoNest Analyzer introduced Similar track feature (social tab) Last played tracks can be removed permanently pitch / tempo bar can be hiddenBlackJumboDog: Ver5.9.0: 2013.06.04 Ver5.9.0 (1) ?????????????????????????????????($Remote.ini Tmp.ini) (2) ThreadBaseTest?? (3) ????POP3??????SMTP???????????????? (4) Web???????、?????????URL??????????????? (5) Ftp???????、LIST?????????????? (6) ?????????????????????Media Companion: Media Companion MC3.569b: New* Movies - Autoscrape/Batch Rescrape extra fanart and or extra thumbs. * Movies - Alternative editor can add manually actors. * TV - Batch Rescraper, AutoScrape extrafanart, if option enabled. Fixed* Movies - Slow performance switching to movie tab by adding option 'Disable "Not Matching Rename Pattern"' to Movie Preferences - General. * Movies - Fixed only actors with images were scraped and added to nfo * Movies - Fixed filter reset if selected tab was above Home Movies. * Updated Medi...Nearforums - ASP.NET MVC forum engine: Nearforums v9.0: Version 9.0 of Nearforums with great new features for users and developers: SQL Azure support Admin UI for Forum Categories Avoid html validation for certain roles Improve profile picture moderation and support Warn, suspend, and ban users Web administration of site settings Extensions support Visit the Roadmap for more details. Webdeploy package sha1 checksum: 9.0.0.0: e687ee0438cd2b1df1d3e95ecb9d66e7c538293b eReading: eReading: ????,??CPU???????。 ??????????。Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.93: Added -esc:BOOL switch (CodeSettings.AlwaysEscapeNonAscii property) to always force non-ASCII character (ch > 0x7f) to be escaped as the JavaScript \uXXXX sequence. This switch should be used if creating a Symbol Map and outputting the result to the a text encoding other than UTF-8 or UTF-16 (ASCII, for instance). Fixed a bug where a complex comma operation is the operand of a return statement, and it was looking at the wrong variable for possible optimization of = to just .VG-Ripper & PG-Ripper: VG-Ripper 2.9.42: changes NEW: Added Support for "GatASexyCity.com" links NEW: Added Support for "ImgCloud.co" links NEW: Added Support for "ImGirl.info" links NEW: Added Support for "SexyImg.com" links FIXED: "ImageBam.com" linksDocument.Editor: 2013.22: What's new for Document.Editor 2013.22: Improved Bullet List support Improved Number List support Minor Bug Fix's, improvements and speed upsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130528): Features include a content management system and a robust featured blogging engine. This includes configurable date based blog post URLs, blog post content association with categories and tags, assignment/customization of category and tag URL patterns, simple blog post feedback collection and review, blog post pagination/indexes, designation of default blog page (required to make search, category links, or tag links function), URL date formatting patterns, RSS feed support for posts and pages...PHPExcel: PHPExcel 1.7.9: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated.Droid Explorer: Droid Explorer 0.8.8.10 Beta: Fixed issue with some people having a folder called "android-4.2.2" in their build-tools path. - 16223 patterns & practices: Data Access Guidance: Data Access Guidance Drop3 2013.05.31: Drop 3DotNet.Highcharts: DotNet.Highcharts 2.0 with Examples: DotNet.Highcharts 2.0 Tested and adapted to the latest version of Highcharts 3.0.1 Added new chart types: Arearange, Areasplinerange, Columnrange, Gauge, Boxplot, Waterfall, Funnel and Bubble Added new type PercentageOrPixel which represents value of number or number with percentage. Used for sizes, width, height, length, etc. Removed inheritances in YAxis option classes. Closed issues: 682: Missing property - XAxisPlotLinesLabel.Text 688: backgroundColor and plotBackgroundColor are...Umbraco CMS: Umbraco 6.1.1: Source codeLooking for the source code? We're not uploading that as a zip file any more because you can already get it from CodePlex, click this link and hit the "Download" link. BlogRead the release blog post for 6.1.0. Read the release blog post for 6.1.1. Getting Started Read the installation documentation: http://our.umbraco.org/documentation/Installation/ Check the free foundation videos on how to get started building Umbraco sites. They're available from: Introduction for webmasters:...Composite C1 CMS - Open Source on .NET: Composite C1 4.0 (release candidate): Composite C1 4.0 (4.0.4897.31550) (release candidate) Write a review for this release Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.0 The following are highlights of major changes since Composite C1 3.2: General user features: Uploads up to 512MB accepted in the media archive New “Block Selector” in Visual Editor – enable users to create styled div, blockquote etc. elements (not yet availabl...New ProjectsApiDoc: ApiDoc is a library for creating your own API documentation similar to the MSDN directly from your assembly and /// Xml comments without source code.Associativy Internal Link Graph Builder: Orchard module for automatically creating Associativy graphs (http://associativy.com/) from internal links.Azure Business App Scale Proof of Concepts: This is actually a series of proof of concept demo applications built to demonstrate scale of particular architecture or application designs. Badr: .Net Web Framework: Simple, Database-driven, Multiplatform, .Net web frameworkCalcolo di Integrali con approssimazioni: Integrali Metodo dei Trapezi Metodo dei Rettangoli Metodo delle Parabole Metodo di Montecarlo Integralsconfiguration: a full function configuration system based on .netCron Expression Descriptor: "Translate" a Cron Expression in a human readable format. Support databinding, and creation of the expression and Quartz.NET jobs schedulerDaphne Web Edition: The Daphne Web Edition of software for professional checkers players running in a browser.Entity framework T4 NHibernate mapping generator: This project contains T4 templates to create POCOs + NHibernate mappings from an Entity Framework Model (.edmx).EWS Streaming Notification Sample Application: Sample application showing how to handle multiple subscriptions using streaming notifications, specifically for Exchange 2013 (or Wave 15 of Office 365).EXACT_EXTENSION: This is project to support Account System in International SchoolsIPS Training: Playing around with Joe to teach some programming.jean0604wordpressmercurial: dfdafdaLenic.DI: Lenic.DI -- Another IOC Container Library Using DelegateManage Azure Srevice: This project is a windows form application to manage azure service and deployments.Microsoft dot Net Lab: This project concentrates into a Lab a large web project based on Microsoft Best Practices and info on “what works” and more what should be avoided in Prod env.Miris Human Milk Analyser: This is a DEMO project ONLYMultilingual call each other: Multilingual call each othernBlade: A Dependency Injection Container.nChart: A JavaScript Chart Library Base on D3.jsnCMS: A Content Management System.nReport: A JavaScript Report Library.nTemplate: A Template Engine.searchLocal: search localT4 Unit Test Constructor: T4 Unit Test Constructor is a Text Transform file that generates complete Unit Testing project based on siblings projects inside a solution.v3r137: m0l3cUL4r dyN4MiC2 5iMul47i0N u5IN9 V3Rl37 iN739r47I0N. vi5U4li23 p4R7ICL32 8y 0P3n9l P0iN7 5prI73. U23 0P3NMp 4nd 0p3NCl f0r 5p33D.Virtual Sport for Sport Team: This is the website to manage a sports team. Through this website you can manage the members of the team, from players to staff, schedules, and more. and for suWindows Azure MultiSite Role: This web role allows you to host multiple websites on the same VM instances, and synchronising the files automatically.WuvOverlay: An overlay for the game Guild Wars 2 to display useful information obtained from the public API.XYZ: XYZ

    Read the article

< Previous Page | 1 2 3 4 5  | Next Page >