Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 4/337 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Running Ubuntu on a Microprocessing Board

    - by Schmidt2626
    I'm pursuing a project that requires the use of a microprocessing board that can run Ubuntu. I have been searching the web, and have found some relatively expensive TI boards that will run it, as well as a board from Adapteva that will run it. Anybody have any suggestions on good boards/how to find boards that run Ubuntu? Many boards obviously run linux and are easy to find, but finding ones that run the Ubuntu Distro is a bit harder.

    Read the article

  • Hardware upgrade: Windows 7 bluescreens, Vista loads

    - by Daniel Schaffer
    I just did a fairly significant hardware upgrade while keeping my hard disks. The old system was a dell Optiplex 745 with an Intel Core 2 duo, LGA 775. The new system is custom built, Intel i5 750. I know you're supposed to do a clean install with a hardware upgrade like this, but I'd had success in the past doing the stealth hardware upgrade like this, so I figured I'd give it a shot. Windows 7 Ultimate 64 bit gets through the loading screen and immediately blue screens and reboots. Windows Vista Home Premium 32-bit, which I have on an old hard drive from an AMD box (!!) loads up fine. I ran through the windows memory checker just to be sure, and my memory is fine. So, is the BSOD the result of some sort of protection mechanism specific to Windows 7? Is there any hope of salvaging that install?

    Read the article

  • Is there a way to disable the hardware on/off switch for the Wireless interface?

    - by avee
    I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

    Read the article

  • 'Memory read error',Sever hardware error?

    - by wss8848
    hello I got a error about my server which is running CentOS5.5. MCE 20 HARDWARE ERROR. This is *NOT* a software problem! Please contact your hardware vendor CPU 1 BANK 8 TSC 6ab9ff9745f62 [at 2394 Mhz 9 days 1:50:52 uptime (unreliable)] MISC cf36ad0100081186 ADDR 203376500 MCG status: MCi status: MCi_MISC register valid MCi_ADDR register valid MCA: MEMORY CONTROLLER RD_CHANNELunspecified_ERR Transaction: Memory read error STATUS 8c0000400001009f MCGSTATUS 0 what is the matter? is memory card error or memory controller error?

    Read the article

  • Why does hardware get slower with time?

    - by Alexey Kulikov
    Why does hardware get slower with time? I have been a PC owner since 1990 and every computer I have had in my life became really, really slow after 3-4 years (even with a full system-reinstall). It is the case with Windows PCs. It is also the case with Apple Hardware. Why is this happening? Can this be avoided?

    Read the article

  • Ubuntu hardware compatability

    - by CT
    I have only previously played with ubuntu using virtual machines with VMware Fusion. So everything just sort of worked. I've never had to install any drivers. I'm considering putting it on some real hardware and using it as a media center. What should I be looking for as far as checking hardware compatibility? How does installing drivers work? Any quick and easy recommendations / guides?

    Read the article

  • How to Refresh or Reset Windows 8 without the System Reserved partition?

    - by Karan
    The article Refresh and reset your PC mentions exactly what happens during the refresh and reset operations in Windows 8: Refresh The PC boots into Windows RE. Windows RE scans the hard drive for your data, settings, and apps, and puts them aside (on the same drive). Windows RE installs a fresh copy of Windows. Windows RE restores the data, settings, and apps it has set aside into the newly installed copy of Windows. The PC restarts into the newly installed copy of Windows. Reset The PC boots into the Windows Recovery Environment (Windows RE). Windows RE erases and formats the hard drive partitions on which Windows and personal data reside. Windows RE installs a fresh copy of Windows. The PC restarts into the newly installed copy of Windows. It is my understanding that Windows RE (Recovery Environment) is included as part of the System Reserved partition created by default on the first hard disk. The size of this partition has gone up to 350 MB from the 100 MB it used to be in Vista/Windows 7, no doubt as a result of adding these features. Now we have already discussed how to skip the creation of this System Reserved partition during Setup. Basically, the same techniques that used to work with Windows 7 work with Windows 8 as well. What I want to know is, what will be the exact repercussions of not having the System Reserved partition in place? I assume Troubleshoot / Advanced options should still be available as before: But what about the Troubleshoot menu itself? Will the Refresh and Reset options disappear? Will they remain but be unavailable? Or possibly they will throw an error if selected? Also, will it be possible to access and successfully execute these options if installation media is available? Anything else that might be affected?

    Read the article

  • Disable Java Hardware Acceleration in windows?

    - by Odys
    I have some issues with my graphics card and I want to disable Hardware Acceleration for java apps. Everything that uses HA is displayed blurry. I've seen some tutorials on how to set this parameter -Dsun.java2d.d3d=false The problem is that the Java Control panel itself is using hardware acceleration and I cannot see anything in order to add this parameter. Edit: Went to java control panel in safe mode, added that parameter and problem continues.. Edit2: Win 7 x64 JRE 6 update 30 Edit3: my deployment.properties (after your suggestions) file is: #deployment.properties #Sun Jan 08 01:12:04 EET 2012 deployment.version=6.0 deployment.capture.mime.types=true deployment.browser.path=C\:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe #Java Deployment jre's #Sun Jan 08 01:12:04 EET 2012 deployment.javaws.jre.0.registered=true deployment.javaws.jre.0.platform=1.6 deployment.javaws.jre.0.osname=Windows deployment.javaws.jre.0.path=C\:\\Program Files (x86)\\Java\\jre6\\bin\\javaw.exe deployment.javaws.jre.0.product=1.6.0_30 deployment.javaws.jre.0.osarch=x86 deployment.javaws.jre.0.location=http\://java.sun.com/products/autodl/j2se deployment.javaws.jre.0.enabled=true deployment.javaws.jre.0.args=-Dsun.java2d.d3d\=false deployment.javaws.jre.1.args=-Dsun.java2d.d3d\=false deployment.javaws.jre.0.args=-Dsun.java2d.noddraw=true deployment.javaws.jre.1.args=-Dsun.java2d.noddraw=true still hardware acceleration is enabled. Is there a possibility that applications can override these settings?

    Read the article

  • Hardware Requirements & Tuning - Flash Media Server 3.5 Interactive

    - by Anthony Kanago
    I am trying to spec out a server to purchase (physically, not rented from someone like softlayer.com) to run an intranet instace of Flash Media Server 3.5 Interactive. In general, the server will likely be fielding somewhere on the order of 400 connections at a time at the upper limit. Of course, should this increase, we don't want to be stuck. While the decision is not final, we will likely be running the server on Red Hat rather than Windows. The server will be run on gigabit ethernet. I have two related questions: What sort of hardware would I need realistically to support this? What advice can you offer for settings in tuning FMS/the OS to be performant to this level? We are looking for a bare minimum that will run this effectively to save on costs. Realistically, the average number of connections will be fairly low (50-150) by comparison with that upper limit estimate. To reiterate: we just want to be cautious in not getting caught when we need more power, but we also need a low-cost solution (doesn't everyone?) and that may take priority. Windows and RedHat are the two officially supported operating systems. Since FMS is stated to be 32-bit only, I'm sticking with a 32-bit OS. The hardware requirements listed by Adobe on their website are: 3.2GHz Intel® Pentium® 4 processor (dual Intel Xeon® or faster recommended) 2GB of RAM (4GB recommended) 1Gb Ethernet card So what realistically do I need for those sorts of connection numbers, and what can I due to tune things up to get more out of less hardware? Thanks!

    Read the article

  • Linux - real-world hardware RAID controller tuning (scsi and cciss)

    - by ewwhite
    Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

    Read the article

  • Proper Imaging Procedures to Restore and Deploy Image with Separate System Reserved Partition

    - by alharaka
    UPDATE: As per my experience here, no one responded. If I do not hear back from TechNet forum members about it, I will post a bounty here, if it makes a difference. I have banged my head against a wall for what seems like all week. I am going to explain my simple procedure, and how none of it, absolutely none, seems to work afterword despite few alternatives and everyone on the internet telling assuming this is how to do it. Diskpart Commands to Create FS Structure REM Select the disk targeted for deployment. REM REM NOTE: Usually disk 0, but drive failure can make it external USB REM media. This will erase the drive regardless! select disk 0 REM Remove previous formatting. clean REM Create System Reserved partition bootloader and files. create partition primary size=100 REM Format the volume format fs=ntfs label="System Reserved" quick override noerr REM Assign the System Reserved partition the D: mount for now assign letter=C REM The main system partition, size not specified to occupy whole drive. create partition primary REM Format the volume format fs=ntfs quick override noerr REM Assign the OS partition the D: mount for now assign letter=D REM Make this the active/bootable partition. sel disk 0 sel partition 1 active REM Close out the diskpart session. exit Now, I thought this was madness, but it turns out the System Reserved partition and standard "System Partition" (C:, commonly both the boot and system volumes where you find the Windows directory AND the bootmgr/ntldr hardware files, this is where Windows 7 diverges) as mounted in the Windows PE session where I run these commands do not matter. See reference here. Since this needs to be BitLocker-ready, enter this crappy System Reserved partition that is separate 100MB of awesome that goes before the regular boot volume. I do this, then I proceed to the next step. Deploy System Reserved and Normal System Images REM C is still the "System Reserved Partition", and the image is just like it sounds. imagex /apply G:\images\systemreserved.wim 1 C: REM D is now what will be the C: system partition on reboot, supposedly. imagex /apply G:\images\testimage.wim 1 D: Reboot the system Now, the images I just captured should look good. This is not even sysprepped, but reapplying the same fscking image I prepared on the same reference workstation hours before. Problem is I get 0xc000000e could not detect the accessible boot device \Windows\system32\winload.exe or different kinds of nonsense revolving around being able to find the boot volume with all the right files. I try different variations of things, now none of them work. I tried repairs with bcdboot, with a fresh System Reserved partition or not, bootrec, and maually editing the damn BCD store with bcdedit. I tried finalizing the above process with and without bootsect /nt60 C: /force. I need to wrap up and automate this procedure. What am I doing wrong that does not make the image happy, but really just miserable.

    Read the article

  • Hardware Raid Card Reviews with SSDs

    - by Nalandial
    Yes I realize there are several questions about this but none of them seem to have the answer I'm looking for. I have two SSDs and am looking to buy a purely hardware raid card for them; however, I can't seem to find any reviews that have specifically tested hardware raid cards with SSDs rather than testing the SSDs themselves. I'm looking for a review because I'm assuming that for example: 100% gain with two 7200rpm drives doesn't necessarily mean 100% gain with a pair of SSDs, since there would be higher speeds, meaning more throughput, meaning more processor/memory usage for the card. If this assumption is wrong then that's fantastic; however if it's true, I am quite sad and would really appreciate any advice or reviews you can find. Thanks in advance!

    Read the article

  • Monitoring HP and Dell hardware in Gentoo.

    - by ewwhite
    I'm working in an environment that features a large number of Gentoo servers running on HP ProLiant and Dell PowerEdge equipment. While I've moved some of these systems to RedHat or CentOS for consistency, I'm still left with a good number of systems that will remain Gentoo. One of the issues I see with the Gentoo arrangement is lack of vendor-supported hardware monitoring. There doesn't seem to be an equivalent to the HP ProLiant Support Pack or Dell's agents for Gentoo. Is this simply something that you give up when using this distribution? How do you monitor hardware health and the like with Gentoo systems?

    Read the article

  • A website to compare software/hardware/electronics?

    - by liori
    Hello, When choosing software or hardware I often Wikipedia's comparision pages like the page on Comparison of project management software. However, criteria on including items on such lists are sometimes unclear (f.e. project has to be "notable", has to have a Wikipedia page), and the number of compared features are limited. Also, Wikipedia's software doesn't make it easy to edit such lists. I am looking for an external webapp/website that would do the task of comparing different solutions in the world of software, hardware, maybe even electronics, in this kind of social way. Is there any kind of such service? It should allow users to add new entries, add new features to compare and discuss items in a collaborative way. It should be also easy to browse already entered items, filter by features. (this might be a good idea for a startup ;-))

    Read the article

  • Enable Hardware Virtualization on HP CompaqDX2420?

    - by 7alwagy
    Hey Guys, After installing vmware7, I tried to run a virtual machine with Mac OSX installed. When I tried to run this virtual machine I got an error message saying: Mac OS X is not supported with software virtualization. To run Mac OS X you need a host on which VMware Workstation supports hardware virtualization. I'v googled and found out that my processor (Intel Core 2 Duo E7500 Processor (2.93 GHz, 3 MB L2 cache, 1066 Mhz FSB)supports Hardware virtualization. Does anyone know how to enable this in order to get this virtual machine running?

    Read the article

  • Advice on new hardware firewall for a small company server-environment

    - by Mestika
    Hi everyone, My companies currently hardware firewall (an old ZyXEL ZyWALL firewall) and is indeed requiring an update to a new firewall. It is a small company with a similar small server-environment, so the need for a huge, complex and expensive solution isn’t there but a more “straight-forward” firewall, that can provide the necessary security to our systems and block unwanted elements from the core server and only accept access through our one server which is used as an “gateway” between the Internet and our internal network. I haven’t that much experience with hardware firewalls so I’m requesting any good advice and/or knowledge on which products will be suited for our specific need. If you need more information about the specific needs we require, please let me know and I’ll provide them to you. Sincerely - Mestika

    Read the article

  • Which linux x86 hardware keystore?

    - by byeo
    I'm terminating SSL/TLS in my DMZ and I have to assume that machine will be hacked. At which point my certificates are compromised. Previously I've used nCipher hardware keystore/accelerator to solve this issue. These cards won't reveal the private key even to root. The card performs the encryption and decryption onboard and is hardened against physical attack. The only way to get at the keys is by attaching a smart card reader to the card itself. I'm having trouble finding information about something to recreate this approach. Is this the domain of specialist switches and firewalls these days? This old page references some of the old hardware: http://www.kegel.com/ssl/hw.html#cards

    Read the article

  • 64-bit Hardware Virtualization on VirtualBox

    - by Cat
    I am trying to set up a SQL Server practice lab using VirtualBox and a trial copy of Windows Server 2K8 R2 in ISO format. I received an error message that states my processor does not support 64-bit hardware virtualization. Although I "Enabled" Intel ardware virtualization in the BIOS that still doesn't work. According to the Intel website, the processor does support VT-x, however the accelerated tab in VirtualBox is greyed out and no references to VT-x are mentioned in the settings options available to me. Any ideas on how I can get around this? I checked around ServerFault and couldn't find anything but if I missed an applicable post a link is great too. Specs below - if additional information is needed please comment and I will provide. Thanks in advance. VirtualBox version - 4.1.18 Hardware - Lenovo B570 1068-A3U i3-2310M

    Read the article

  • Hardware needed for 2000 users? [closed]

    - by Trcx
    I have school assignment that is fairly well defined, requiring us to come up with a plan for an environment serving dynamic web applications to 2000 users, and should be able to scale up to six thousand. I have done plenty of research as far as load balancing, redundancy, UPSs, etc, but am having a hard time figuring out how much hardware is actually needed in the way of physical servers, ram, processing power, etc. The assignment states that the server will have a lot of dynamic code, email, and a database are required, all utilizing the appropriate microsoft service (MS SQL, Exchange, IIS). I already plan on splitting them out on to separate servers, but can't even fathom the hardware requirements of something that large scale. Could someone with experience weight in on this, or point me two some good articles?

    Read the article

  • Do I need to match hardware on a Mac to my PC to get the same user experience?

    - by Darth
    I've been playing around with the thought of moving from a PC to a Mac. if you don't want to read this, skip to the "upgrade options" My current setup Most of my time I spent moving back and forth between Linux and Windows. During the last upgrade to Vista, I got myself pc with Core 2 Quad, 8GB of RAM and GeForce 9800GTX+. Currently I'm running dual boot between Ubuntu 10.04 and Windows Vista x64. Most of my work, around 80%, I can do on Ubuntu, which is mostly Ruby/Java programming. If that was all I needed, Ubuntu would be really great. However, I also do quite a lot of Photography and Design, which forces me to use Adobe software (not only Photoshop). I also work with Wacom Intuos4 tablet, which doesn't really have great support on Linux machines. I've tried virtualization both ways (Linux in Win and Win in Linux), but neither was anywhere near satisfying. These are those of many many reasons I want to move to OS X. Upgrade options This is how I see my upgrade options: Mac Mini - cheapest solution, but worst performance iMac - more expensive, better performing with second LCD for free Mac Pro - could match my current PC performance, currently outside of the price range When I compare the Mac hardware vs my current PC, it will be always worse, unless I decide to pump in a lot of money. The question that comes to my head, do I need to match my current PC hardware to get the same user experience with a Mac? If I look at it from the Vista point of view, 2GB RAM is as low as it gets, 4GB is usable ... and the 8GB runs very smoothly. PC HW != Mac HW? If I bought the Mac Mini for roughly the same price I paid for my PC (Core 2 Quad with 8GB RAM), I'd get Core 2 Duo with 4GB RAM. But I don't want to run Vista on it, so I can't compare the hardware directly. Say that I want to do the same things on the Mac Mini as I do on my PC, eg. open up 50 tabs in Google Chrome and start working with a large PSD in Photoshop (couple hundred MB), would running on Mac OS X compensate for the lower hardware performance? My point is, that if I'm about to upgrade, I wouldn't like to upgrade to hardware that runs a lot slower. Good analogy for this is Vista vs Ubuntu, where you can run Ubuntu smoothly on a low end laptop, but in Vista, you'd be happy to open a browser. Does the same principle apply to OS X?

    Read the article

  • Recommended motherboard with hardware raid for Linux

    - by luison
    Hi. We want to setup an internal office server for testing jobs (LAMP), email and samba. Only about 5-10 users. We are also considering starting to virtualize, initially by a base Ubuntu Server with Xen or VMWare Open Source server. Our current system runs with a Linux Raid which has worked great but it's always been complicated to recover the boot sector when one the drives fail and therefore I would prefer using now a hardware raid instead, but ideally with some kind of software monitoring. For this reason and considering we don't want to spend a fortune a I would appreciate any comments on the following options. Motherboard with RAID with linux support... which could you recommend. Motherboard + Hardware Raid card... Adaptec does not seem to have great Linux suppport. 3Ware seems to have a tc soft controller which we've used on a hosting company, but hard to find here in Spain. HP Proliant type basic server, which? Dell Small Servers... any good for Linux? Thanks in advance for any feedback.

    Read the article

  • VMWare Newbie - looking for hardware recommendations and help :) [closed]

    - by Dan
    I am looking for some hardware recommendations on an upcoming virtualization project. We are a small company (80 users - 25 in site 1, 55 in site 2) currently using Windows Server 2003 - no VM servers yet. Our AD is setup where site 1 is the root domain and site 2 is a subdomain/subnet - connected by T1 and VPN for failover. The current DC's also server as file servers, print servers, AntiVirus servers. Email is in the cloud. Additionally then in site 1 we have 3 additional member servers - one running IBM Websphere for a customer specific app, one running Infor PowerLink (no real heavy load) and another that we use for Virtual Studio apps and also runs DirSync for Exchange Online. No heavy workloads on any of these machines really. We also have an AS400 box that we run ERP/CRM software on that site 2 connects to over the WAN link. In site 2 we also have a SQL machine that runs on Win2K server. Database files are not large less than 5 GB. Light to Medium workload on this machine. File servers in each site store less than 500 GB data and probably won't grow to more than 1TB in the next 5 years. I am looking to go to VMWare in both sites and virtualize all servers. What recommendations do you have for server, storage hardware? Is it safe to virtualize all of your DC's? Any help or advice would be greatly appreciated. Thanks.

    Read the article

  • Hardware testing tool/suite

    - by Aviator
    Hi All, I just bought a new core i5 system (assembled) and started installing Windows 7. It was failing for many times and at some point got installed. After that, frequent crashes related to MEMORY. So checked the RAM using memtest86+ and found many errors.I got it replaced with the vendor and now if i install ANY OS, at some point in installation it either freezes completely with no response for hours, or restarts automatically. I tried installing Windows 7, Windows Vista and Ubuntu 9.10. I tested the new RAM again and found no problems in about 2 passes using memtest86+. I even updated the BIOS using bootable USB and even the problem persists. I am really not sure which hardware is causing trouble. I dont have any OS inside it, so i have to check using bootable CDs DVDs and USB only. Please advice on how to proceed. Are there any suites/ separate tools for checking integrity of each hardware parts and troubleshoot it? I wanted to confirm which part is problematic before going for replacement. Thanks a lot! This is the config: Core i5, MSI P55-GD65, GSKill 2x2GB, Seagate 500GB 7200rpm, CM Extreme 600W PSU, Saphhire Radeon 5770 1GB, LG DVD Writer

    Read the article

  • GDI & Hardware Cursor

    - by Abhi
    Dear All I am working on iMX51 project. I want to know what does GDI and hardware cursor means? The RTOS which i am using is WINCE 6.0 r3. We are actually looking to speed up the GDI and to implement the hardware cursor. So for that i want to know abt the GDI and the Hardware Cursor. I am also referring WC600_MX51_SDK_0912_ReferenceManual.pdf & MCIMX51RM.pdf and in these pdf i came to know that the hardware cursor is related to Display Processor module . But still i am unclear, what exactly does speed up of GDI means & Hardware cursor means? Please guide me the correct step to how to achieve my target....

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >