Search Results

Search found 103 results on 5 pages for 'huawei'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• How to disable 3G USB Modem internal storage from being loaded by linux kernel?

  - by Krystian

  Hi, I've got a problem with my 3G modem [Huawei E122]. It has internal storage and kernel assigns a device [/dev/sdX] to it. Because of that, every second time my machine will not boot - kernel panic - as my usb hdd gets assigned /dev/sdb instead of /dev/sda. I cannot use LABEL nor UUID in root= kernel parameter, as it is only available when using initrd, and I can't use it - I am using Debian on my router - mips architecture machine. I have to prevent this from happening, as my router has to start everyday and I have to be sure it works ok. I don't have physical access to restart it when something goes wrong. I don't use my modem internal storage, there's no SD card inserted. However kernel detects the reader and loads it. I can not prevent loading od usb drivers since my hdd is on USB as well. I will appreciate any ideas.

  Read the article

• Automatically connect to 3G dialup connection

  - by Philipp

  I have a notebook with an internal 3G modem (a HUAWEI Mobile Connect) which appears to the system as a dialup modem. When I want to connect to the Internet, I need to open the charms bar, click settings, network, the modem and "connect" to open the dialup dialog on the desktop. When the connection is interrupted for some reason, I need to repeat these steps. Is there a way to configure Windows 8 to automatically (and preferably silently in the background) connect with this modem at system startup and automatically restore the connection should it get interrupted? As an operating system which is developed for mobile devices, I would expect it to be able to somehow be able to manage a always-on 3g connection.

  Read the article

• Downloads speed starts ok but after a few seconds they go down to 10kbps?

  - by peterg

  Since yesterday any file I try to download from any host start downloading ok (at 1mbps) but after a few seconds the speed start to decrease down to 10kbps. I use a mobile modem (huawei) and I connect to a wcdma network. What could be happening? I use kaspersky, and I checked the Network Monitor and I don't see any weird process using bandwidth. What other tests can I run? Recommend me some app to monitor the traffic to see if I have some malware or see where my bandwidth goes.

  Read the article

• Windows 8.1 update effectively disabled mobile broadband connection

  - by natarajan

  I have Windows 8.1 on my HP laptop and a Huawei broadband modem which was working fine but since some of the updates of Windows 8.1 it is now not working. I have following issue: Under Device Manager Network Adaptor it shows the Hauwei mobile E303H but when I click on it and go to the Driver tab I can see that no device driver is installed. When I click to update the driver and select the generic mobile broadband adaptor it fails and shows "access denied". How do I go about replacing the driver for this?

  Read the article

• Cannot download or send MMS

  - by CGFoX

  I have a Huawei Honor with Android 4.0.3. I got a plan at AT&T that includes 200 messages (both SMS and MMS) per month. Unfortunately I can neither receive nor send MMS. When I receive one, there's a download-button. But when I hit download it doesn't do anything, even when I got internet connection via wifi. When I try to send a MMS it only says "sending...", but nothing happens. My guess is that I didn't configure the settings correctly, but I couldn't find anything useful online. Also I don't have a single APN. Maybe I need to create one? Thanks for your help!

  Read the article

• can't access SAMBA shares on UBUNTU-server from other computers

  - by larand

  Installed UBUNTU-server 12.04 and configured /etc/samba/smb.conf as: #======================= Global Settings ======================= [global] workgroup = HEMMA server string = %h server (Samba, Ubuntu) security = user wins support = yes dns proxy = no log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d encrypt passwords = no passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ############ Misc ############ usershare allow guests = yes #======================= Share Definitions ======================= [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = no [Bilder original] comment = Original bilder path = /mnt/bilder/org browseable = yes read only = no guest ok = no create mask = 0755 [Bilder publika] comment = Bilder för allmän visning path = /mnt/bilder/public browseable = yes read only = yes guest ok = yes [Musik] comment = Musik path = /mnt/music/public browseable = yes read only = yes guest ok = yes I have a network setup around a 4G router "HUAWEI B593" where some computers are connected by WIFI and others by LAN. The server is connected by LAN. On one computer running windows XP I can see the server but are not allowed to acces them. On another computer on the WIFI-net running win7 I cannot see the server at all but I can ping the server and I can see the smb-protocoll is running when sniffing with wireshark. I don't primarily want to use passwords, computers on the lan and wifi should be able to connect without any login-procedure. I'm sure my config is not sufficient but have hard to understand how I should do. Theres a lot of descriptions on the net but most is old and none have been of any help. I'm also confused by the fact that I can not se the sever on my win7-machine even though it communicates with the samba-server. Would be very happy if anyone could spread some light over this mess.

  Read the article

• Huwawei E220 broadband dongle not working

  - by Roshnal

  The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

  Read the article

• Lots of Internet browsing issues, all browsers

  - by dario_ramos

  Before the upgrade, everything was working fine. Now, however, I can connect to the Internet but a lot of stuff fails, and the weirdest thing is that it happens with Firefox, Chromium and Opera. Some of the things that fail: I can't log in to Stack Overflow, after entering user/pass it loads for a long time on Firefox and throws Error 408 (browser request timed out) on Chromium and Opera I can't log in to Hotmail, similar symptoms I can login to Facebook, but when I try to write a comment, or just post something in my wall, it stays loading for a long time, and then fails The first two issues seem to be related to secure pages, and the second one is another issue altogether, I believe. However, they all happen with all browsers, which is really weird. Talking about weird: I connect using a Huawei SmartAX MT 810 USB modem, which cost me blood and tears to get it working under Ubuntu. I ordered an ethernet modem/router with my ISP, and I'm still waiting, but this issue intrigues me anyway. Has anyone experienced this kind of problems? I Googled around, but couldn't find a similar case.

  Read the article

• problem in connecting Reliance booadband +

  - by Athira R

  I tried connceting reliance broadband in ubuntu. then an autorun prompt will come. when i click install another pop up coming saying autorun file not found. And when i checked in Internet connection to add connection. Reliance broadband option iteself is not there as connected device. This is Athira. I could not find any add comment option on my main question. So i created a new account and adding as new answer to ur question. athira@athira-laptop:~$ sudo lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 004: ID 12d1:1505 Huawei Technologies Co., Ltd. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0421:0508 Nokia Mobile Phones E65 (PC Suite mode) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 064e:a103 Suyin Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub athira@athira-laptop:~$ i got this after running it in ubuntu 10.04

  Read the article

• Can Connect to 3G Modem via GSMComm but cannot see any SMS

  - by user305044

  Hi, I'm trying to write an application that receives SMS messages into the app I'm developing (in C# if you care :). Research indicates the best bet is to use GSMComm library. I've downloaded the library and using the demo app I have managed to connect to the 3g modem (a Huawei E1756) but when I query it for SMS's received it comes back with 0. Interestingly if I use the software that comes with the application then I can see the messages. Anyone got any clues on why this would be? Or other tips on how to retrieve the messages? Cheers, Kym

  Read the article

• The Oracle Enterprise Linux Software and Hardware Ecosystem

  - by sergio.leunissen

  It's been nearly four years since we launched the Unbreakable Linux support program and with it the free Oracle Enterprise Linux software. Since then, we've built up an extensive ecosystem of hardware and software partners. Oracle works directly with these vendors to ensure joint customers can run Oracle Enterprise Linux. As Oracle Enterprise Linux is fully--both source and binary--compatible with Red Hat Enterprise Linux (RHEL), there is minimal work involved for software and hardware vendors to test their products with it. We develop our software on Oracle Enterprise Linux and perform full certification testing on Oracle Enterprise Linux as well. Due to the compatibility between Oracle Enterprise Linux and RHEL, Oracle also certifies its software for use on RHEL, without any additional testing. Oracle Enterprise Linux tracks RHEL by publishing freely downloadable installation media on edelivery.oracle.com/linux and updates, bug fixes and security errata on Unbreakable Linux Network (ULN). At the same time, Oracle's Linux kernel team is shaping the future of enterprise Linux distributions by developing technologies and features that matter to customers who deploy Linux in the data center, including file systems, memory management, high performance computing, data integrity and virtualization. All this work is contributed to the Linux and Xen communities. The list below is a sample of the partners who have certified their products with Oracle Enterprise Linux. If you're interested in certifying your software or hardware with Oracle Enterprise Linux, please contact us via [email protected] Chip Manufacturers Intel, Intel Enabled Server Acceleration Alliance AMD Server vendors Cisco Unified Computing System Dawning Dell Egenera Fujitsu HP Huawei IBM NEC Sun/Oracle Storage Systems, Volume Management and File Systems 3Par Compellent EMC VPLEX FalconStor Fusion-io Hitachi Data Systems HP Storage Array Systems Lustre Network Appliance OCFS2 PillarData Symantec Veritas Storage Foundation Networking: Switches, Host Bus Adapters (HBAs), Converged Network Adapters (CNAs), InfiniBand Brocade Emulex Mellanox QLogic Voltaire SOA and Middleware ActiveState ActivePerl, ActivePython Tibco Zend Backup, Recovery & Replication Arkeia Network Backup Suite BakBone NetVault CommVault Simpana 8 EMC Networker, Replication Manager FalconStor Continuous Data Protector HP Data Protector NetApp Snapmanager Quest LiteSpeed Engine Steeleye Data Replication, Disaster Recovery Symantec NetBackup, Veritas Volume Replicator, Symantec Backup Exec Zmanda Amanda Enterprise Data Center Automation BMC CA Unicenter HP Server Automation (formerly Opsware), System Management Homepage Oracle Enterprise Manager Ops Center Quest Vizioncore vFoglight Pro TeamQuest Manager Clustering & High Availability FUJITSU x10sure NEC Express Cluster X Steeleye Lifekeeper Symantec Cluster Server Univa UniCluster Virtualization Platforms and Cloud Providers Amazon EC2 Citrix XenServer Rackspace Cloud VirtualBox VMWare ESX Security Management ArcSight: Enterprise Security Manager, Logger CA Access Control Centrify Suite Ecora Auditor FoxT Manager Likewise: Unix Account Management Lumension Endpoint Management and Security Suite QualysGuard Suite Quest Privilege Manager McAfee Application Control, Change ControlIntegrity Monitor, Integrity Control, PCI Pro Solidcore S3 Symantec Enterprise Security Manager (ESM) Tripwire Trusted Computer Solutions

  Read the article

• Oracle collaborates with leading IT vendors on Cloud Management Standards

  - by Anand Akela

  During the last couple of days, two key specifications for cloud management standards have been announced. Oracle collaborated with leading technology vendors from the IT industry on both of these cloud management specifications. One of the specifications focuses "Infrastructure as a Service" ( IaaS )  cloud service model , while the other specification announced today focuses on "Platform as a Service" ( PaaS ) cloud service model. Please see The NIST Definition of Cloud Computing to learn more about IaaS and PaaS . Earlier today Oracle , CloudBees, Cloudsoft, Huawei, Rackspace, Red Hat, and Software AG   announced the Cloud Application Management for Platforms (CAMP) specification that will be submitted to Organization for the Advancement of Structured Information Standards (OASIS) for development of an industry standard, in an effort to help ensure interoperability for deploying and managing applications across cloud environments.  Typical PaaS architecture - Source : CAMP specification The CAMP specification defines the artifacts and APIs that need to be offered by a PaaS cloud to manage the building, running, administration, monitoring and patching of applications in the cloud. Its purpose is to enable interoperability among self-service interfaces to PaaS clouds by defining artifacts and formats that can be used with any conforming cloud and enable independent vendors to create tools and services that interact with any conforming cloud using the defined interfaces. Cloud vendors can use these interfaces to develop new PaaS offerings that will interact with independently developed tools and components. In a separate cloud standards announcement yesterday, the Distributed Management Task Force ( DMTF ), the organization bringing the IT industry together to collaborate on systems management standards development, validation, promotion and adoption, released the new Cloud Infrastructure Management Interface (CIMI) specification. Oracle collaborated with various technology vendors and industry organizations on this specification. CIMI standardizes interactions between cloud environments to achieve interoperable cloud infrastructure management between service providers and their consumers and developers, enabling users to manage their cloud infrastructure use easily and without complexity. DMTF developed CIMI as a self-service interface for infrastructure clouds ( IaaS focus ) , allowing users to dynamically provision, configure and administer their cloud usage with a high-level interface that greatly simplifies cloud systems management. Mark Carlson, Principal Cloud Strategist at Oracle provides more details about CAMP  and CIMI his blog . Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Cloud Application Management for Platforms

  - by user756764

  Today Oracle, along with CloudBees, Cloudsoft, Huawei, Rackspace, Red Hat, and Software AG, published the Cloud Application Management for Platforms (CAMP) specification. This spec deals with application management in the context of PaaS. It defines a model (consisting of a set resources and their relationships), a REST-based API for manipulating that model, and a packaging format for getting applications (and their attendant metadata) into and out of the platform. My colleague, Mark Carlson, has already provided an excellent writeup on the spec here. The following, additional points bear emphasizing: CAMP is language, framework and platform neutral; it should be equally applicable to the task of deploying and managing Ruby on Rails applications as Java/Spring applications (as Node.js applications, etc.) CAMP only covers the interactions between a Cloud Consumer and a Cloud Provider (using the definitions of these terms provided in the NIST Cloud Computing Reference Architecture). The internal APIs used by the Cloud Provider to, for example, deploy additional platform services (e.g. a new message queuing service) are out of CAMP's scope. CAMP supports the management of the entire lifecycle of the application (e.g. start/stop, suspend/resume, etc.) not just the deployment of the components that make up the application. Complexity is the antithesis of interoperability. One of CAMP's goals is to be as broadly interoperable as possible. To this end, the authors of CAMP tried to "make things as simple as possible, but no simpler". For example, JSON is the only serialization format used in the spec (although Providers can extend this to support additional serialization formats such as XML). It remains to be seen whether we can preserve this simplicity as the spec is processed by OASIS. So far, those who have indicated an interest in collaborating on the spec seem to be of a like mind with regards to the need for simplicity. The flip side to simplicity is the knowledge that you undoubtedly missed something that is important to someone. To make up for this, CAMP is designed to be extensible. The idea is to ship what we know will work, allow implementers to extend the spec, then re-factor the spec to incorporate the most popular extensions. Anyone interested in this effort, particularly those of you using PaaS-level services, is encouraged to join the forthcoming OASIS TC. As you may have noticed, CAMP is a bit of a departure from some of the more monolithic management standards that have preceded it. The idea is to develop simple, discrete standards targeted to address specific interoperability and portability problems and tie these standards together with common patterns based on REST and HATEOAS. I'm excited to see how this idea plays out.

  Read the article

• Test your internet connection - Emtel Mobile Internet

  After yesterday's report on Emtel Fixed Broadband (I'm still wondering where the 'fixed' part is), I did the same tests on Emtel Mobile Internet. For this I'm using the Huawei E169G HSDPA USB stick, connected to the same machine. Actually, this is my fail-safe internet connection and the system automatically switches between them if a problem, let's say timeout, etc. has been detected on the main line. For better comparison I used exactly the same servers on Speedtest.net. The results Following are the results of Rose Hill (hosted by Emtel) and respectively Frankfurt, Germany (hosted by Vodafone DE): Speedtest.net result of 31.05.2013 between Flic en Flac and Rose Hill, Mauritius (Emtel - Mobile Internet) Speedtest.net result of 31.05.2013 between Flic en Flac and Frankfurt, Germany (Emtel - Mobile Internet) As you might easily see, there is a big difference in speed between national and international connections. More interestingly are the results related to the download and upload ratio. I'm not sure whether connections over Emtel Mobile Internet are asymmetric or symmetric like the Fixed Broadband. Might be interesting to find out. The first test result actually might give us a clue that the connection could be asymmetric with a ratio of 3:1 but again I'm not sure. I'll find out and post an update on this. It depends on network coverage Later today I was on tour with my tablet, a Samsung Galaxy Tab 10.1 (model GT-P7500) running on Android 4.0.4 (Ice Cream Sandwich), and did some more tests using the Speedtest.net app. The results are actually as expected and in areas with better network coverage you will get better results after all. At least, as long as you stay inside the national networks. For anything abroad, it doesn't really matter. But see for yourselves: Speedtest.net result of 31.05.2013 between Cascavelle and servers in Rose Hill, Mauritius (Emtel - Mobile Internet), Port Louis, Mauritius and Kuala Lumpur, Malaysia It's rather shocking and frustrating to see how the speed on international destinations goes down. And the full capability of the tablet's integrated modem (HSDPA: 21 Mbps; HSUPA: 5.76 Mbps) isn't used, too. I guess, this demands more tests in other areas of the island, like Ebene, Pailles or Port Louis. I'll keep you updated... The question remains: Alternatives? After the publication of the test results on Fixed Broadband I had some exchange with others on Facebook. Sadly, it seems that there are really no alternatives to what Emtel is offering at the moment. There are the various internet packages by Mauritius Telecom feat. Orange, like ADSL, MyT and Mobile Internet, and there is Bharat Telecom with their Bees offer which is currently limited to Ebene and parts of Quatre Bornes.

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• Network tools not working with a 3G connection

  - by gAMBOOKa

  Some of my network tools stopped working after I switched to a 3G connection from a DSL one. Cain and Abel's sniffer, Metasploit, even the NMAP scanner. I'm using Windows 7. The 3G device in question is the Huawei E180. Here's the error I get when running NMAP WARNING: Using raw sockets because ppp2 is not an ethernet device. This probably won't work on Windows. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 5 seconds then retry. pcap_open_live(ppp2, 100, 0, 2) FAILED. Reported error: Error opening adapter: The system cannot find the device specified. (20). Will wait 25 seconds then retry. Call to pcap_open_live(ppp2, 100, 0, 2) failed three times. Reported error: Error opening adapter: The system cannot find the device specified. (20) Metasploit's refused connection to my websites too.

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• Puzzling TCP performance over 3G / UMTS

  - by lemonsqueeze

  I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

  Read the article

• rails + sheevaplug = rails home development server and more

  - by microspino

  Hello I'd like to build a "Rails Brick" using a Sheevaplug from Marvell (O.S. is Ubuntu out of the box but You can install other distributions on It). It will be a home server and a silent, low cost (99$) low energy development machine. I'd like to add rails RVM, lot of gems, git-based heroku like deployment, passenger + nginx. This way I could have a portable server with a complete development environment and maybe I could find a hosting company where I can co-locate a grid of this devices or I can sell It as a simple little server for 10 or less users offices, with some centralized rails services (I think to a CMS, a BLOG, a WIKI, calendar or whatever this little jewel could afford). The usb port could make It a print server too or a UMTS link to the web via HUAWEI like usb UMTS keys. Can you give me some hint about: Is this project a crazy-close-to-failure idea? Why? which gem would You include? which rails open source app would you suggest? I have already an Excito Bubba Server at home, I saw the TonidoPlug so It came up in my mind to build something similiar but Rails based (Bubba is PHP based, TonidoPlug I don't know but It does not seems a Rails thing).

  Read the article

• Weird camera Intent behavior

  - by David Erosa

  Hi all. I'm invoking the MediaStore.ACTION_IMAGE_CAPTURE intent with the MediaStore.EXTRA_OUTPUT extra so that it does save the image to that file. On the onActivityResult I can check that the image is being saved in the intended file, which is correct. The weird thing is that anyhow, the image is also saved in a file named something like "/sdcard/Pictures/Camera/1298041488657.jpg" (epoch time in which the image was taken). I've checked the Camera app source (froyo-release branch) and I'm almost sure that the code path is correct and wouldn't have to save the image, but I'm a noob and I'm not completly sure. AFAIK, the image saving process starts with this callback (comments are mine): private final class JpegPictureCallback implements PictureCallback { ... public void onPictureTaken(...){ ... // This is where the image is passed back to the invoking activity. mImageCapture.storeImage(jpegData, camera, mLocation); ... public void storeImage(final byte[] data, android.hardware.Camera camera, Location loc) { if (!mIsImageCaptureIntent) { // Am i an intent? int degree = storeImage(data, loc); // THIS SHOULD NOT BE CALLED WITHIN THE CAPTURE INTENT!! ....... // An finally: private int storeImage(byte[] data, Location loc) { try { long dateTaken = System.currentTimeMillis(); String title = createName(dateTaken); String filename = title + ".jpg"; // Eureka, timestamp filename! ... So, I'm receiving the correct data, but it's also being saved in the "storeImage(data, loc);" method call, which should not be called... It'd not be a problem if I could get the newly created filename from the intent result data, but I can't. When I found this out, I found about 20 image files from my tests that I didn't know were on my sdcard :) I'm getting this behavior both with my Nexus One with Froyo and my Huawei U8110 with Eclair. Could please anyone enlight me? Thanks a lot.

  Read the article

• adb doesn't get phone's device name/number

  - by Dona Hertel

  Okay, I have a strange problem I haven't seen listed anywhere. I'm developing an android app and I would like to run it on my Huawei Ascend. I have set up a file in /etc/udev/90-android.rules with the line: SUBSYSTEM=="usb", SYSFS{idVendor}=="12d1", MODE="0666" where '12d1' is the correct vendor ID for this phone (I verified this with 'lsusb' command). When I plug in the phone (it does have debugging on) and restart the adb server I get a connection but the name field does not get set. The output to 'adb devices' is: List of devices attached \n ???????????? device Plugging and unplugging the cable doesn't resolve this. Neither does restarting the adb server. Nor does a total reboot of both my computer or the phone. This is fine as I can get logs and a shell. The problem is that in the eclipse plugin, the device's name is list as "????????????" and so when it tries connect, it quits with an error message of 'device not found' even though the device is listed and 'online'. Is there something else I need to do? Do I need to set the name of the device somehow? cocofan P.S.: The app has 'debuggable' set to true in the manifest file.

  Read the article

• How to rename many files url escaped (%XX) to human readable form

  - by F. Hauri

  I have downloaded a lot of files in one directory, but many of them are stored with URL escaped filename, containing sign percents folowed by two hexadecimal chars, like: ls -ltr $HOME/Downloads/ -rw-r--r-- 2 user user 13171425 24 nov 10:07 Swisscom%20Mobile%20Unlimited%20Kurzanleitung-%282011-05-12%29.pdf -rw-r--r-- 2 user user 1525794 24 nov 10:08 31010ENY-HUAWEI%20E173u-1%20HSPA%20USB%20Stick%20Quick%20Start-%28V100R001_01%2CEnglish%2CIndia-Reliance%2CC%2Ccolor%29.pdf ... All theses names match the following form whith exactly 3 parts: Name of the object -( Revision, and/or Date, useless ... ). Extension In same command, I would like to obtain unde My goal is to having one command to rename all this files to obtain: -rw-r--r-- 2 user user 13171425 24 nov 10:07 Swisscom_Mobile_Unlimited_Kurzanleitung.pdf -rw-r--r-- 2 user user 1525794 24 nov 10:08 31010ENY-HUAWEI_E173u-1_HSPA_USB_Stick_Quick_Start.pdf I've successfully do the job in full bash with: urlunescape() { local srce="$1" done=false part1 newname ext while ! $done ;do part1="${srce%%%*}" newname="$part1\\x${srce:${#part1}+1:2}${srce:${#part1}+3}" [ "$part1" == "$srce" ] && done=true || srce="$newname" done newname="$(echo -e $srce)" ext=${newname##*.} newname="${newname%-(*}" echo ${newname// /_}.$ext } for file in *;do mv -i "$file" "$(urlunescape "$file")" done ls -ltr -rw-r--r-- 2 user user 13171425 24 nov 10:07 Swisscom_Mobile_Unlimited_Kurzanleitung.pdf -rw-r--r-- 2 user user 1525794 24 nov 10:08 31010ENY-HUAWEI_E173u-1_HSPA_USB_Stick_Quick_Start.pdf or using sed, tr, bash ... and sed: for file in *;do echo -e $( echo $file | sed 's/%\(..\)/\\x\1/g' ) | sed 's/-(.*\.\([^\.]*\)$/.\1/' | tr \ \\n _\\0 | xargs -0 mv -i "$file" done ls -ltr -rw-r--r-- 2 user user 13171425 24 nov 10:07 Swisscom_Mobile_Unlimited_Kurzanleitung.pdf -rw-r--r-- 2 user user 1525794 24 nov 10:08 31010ENY-HUAWEI_E173u-1_HSPA_USB_Stick_Quick_Start.pdf But, I'm sure, there must exist simplier and/or shorter way to do this.

  Read the article

• network is not available even when cisco vpn client is connected. wrong route?

  - by javapowered

  I'm using Vodafone 3G modem. I've disabled other network devices in the system (ethernet, wifi, wimax) turned off firewall and antivirus. cisco vpn client connects successfully but I still can not access computer 192.168.147.120 (as well as any other computer from network). Any suggestions are welcome as I don't know what to do. ipconfig /all and route print commands (translated to english): Microsoft Windows [Version 6.1.7601] (C) Microsoft Corporation (Microsoft Corp.), 2009. All rights reserved. C: \ Users \ Oleg> ipconfig / all IP Configuration for Windows The name of the computer. . . . . . . . . : OlegPC The primary DNS-suffix. . . . . . : Node Type. . . . . . . . . . . . . : Hybrid IP-routing is enabled. . . . : No WINS-proxy enabled. . . . . . . : No Ethernet adapter Local Area Connection 4: DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Cisco Systems VPN Adapter Physical Address. . . . . . . . . 00-05-9A-3C-78-00 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes Local IPv6-address channel. . . : Fe80:: c073: 41b2: 852f: eb87% 26 (Preferred) IPv4-address. . . . . . . . . . . . : 10.53.127.204 (Preferred) The subnet mask. . . . . . . . . . : 255.0.0.0 Default Gateway. . . . . . . . . : IAID DHCPv6. . . . . . . . . . . : 536872346 DUID the client DHCPv6. . . . . . . 00-01-00-01-14-6F-4C-8D-60-EB-69-85-10-2D DNS-servers. . . . . . . . . . . : Fec0: 0:0: ffff:: 1% 1 fec0: 0:0: ffff:: 2% 1 fec0: 0:0: ffff:: 3% 1 NetBios over TCP / IP. . . . . . . . : Disabled Adapter mobile broadband connection through a broadband adapter mobile communications: DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Vodafone Mobile Broadband Network Adapter (Huawei) Physical Address. . . . . . . . . 58-2C-80-13-92-63 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes IPv4-address. . . . . . . . . . . . : 10.229.227.77 (Preferred) The subnet mask. . . . . . . . . . : 255.255.255.252 Default Gateway. . . . . . . . . : 10.229.227.78 DNS-servers. . . . . . . . . . . : 163.121.128.134 212.103.160.18 NetBios over TCP / IP. . . . . . . . : Disabled Tunnel adapter isatap. {737FF02E-D473-4F91-840E-2A4DD293FC12}: State of the environment. . . . . . . . : DNS Suffix. DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Adapter Microsoft ISATAP # 3 Physical Address. . . . . . . . . 00-00-00-00-00-00-00-E0 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes Tunnel adapter isatap. {EF585226-5B07-4446-A5A4-CB1B8E4B13AC}: State of the environment. . . . . . . . : DNS Suffix. DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Adapter Microsoft ISATAP # 4 Physical Address. . . . . . . . . 00-00-00-00-00-00-00-E0 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . 00-00-00-00-00-00-00-E0 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes IPv6-address. . . . . . . . . . . . : 2001:0:4137:9 e76: ea: b77: f51a: 1cb2 (Basically d) Local IPv6-address channel. . . : Fe80:: ea: b77: f51a: 1cb2% 16 (Preferred) Default Gateway. . . . . . . . . ::: NetBios over TCP / IP. . . . . . . . : Disabled C: \ Users \ Oleg> route print ================================================== ========================= List of interfaces 26 ... 00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter 23 ... 58 2c 80 13 92 63 ...... Vodafone Mobile Broadband Network Adapter (Huawei) 1 ........................... Software Loopback Interface 1 19 ... 00 00 00 00 00 00 00 e0 Adapter Microsoft ISATAP # 3 20 ... 00 00 00 00 00 00 00 e0 Adapter Microsoft ISATAP # 4 16 ... 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface ================================================== ========================= IPv4 Route Table ================================================== ========================= Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.229.227.78 10.229.227.77 296 10.0.0.0 255.0.0.0 On-link 10.53.127.204 286 10.6.93.21 255,255,255,255 10.0.0.1 10.53.127.204 100 10.13.50.12 255,255,255,255 10.0.0.1 10.53.127.204 100 10.53.8.0 255.255.252.0 10.0.0.1 10.53.127.204 100 10.53.127.204 255.255.255.255 On-link 10.53.127.204 286 10.53.128.0 255.255.248.0 10.0.0.1 10.53.127.204 100 10.53.148.0 255,255,255,240 10.0.0.1 10.53.127.204 100 10.53.148.16 255,255,255,240 10.0.0.1 10.53.127.204 100 10.229.227.76 255.255.255.252 On-link 10.229.227.77 296 10.229.227.77 255.255.255.255 On-link 10.229.227.77 296 10.229.227.79 255.255.255.255 On-link 10.229.227.77 296 10.255.255.255 255.255.255.255 On-link 10.53.127.204 286 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.147.0 255,255,255,240 10.0.0.1 10.53.127.204 100 192.168.147.96 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,112 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,128 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,144 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,224 255,255,255,240 10.0.0.1 10.53.127.204 100 192.168.214.0 255.255.255.0 10.0.0.1 10.53.127.204 100 192.168.215.0 255.255.255.0 10.0.0.1 10.53.127.204 100 194.247.133.19 255,255,255,255 10.0.0.1 10.53.127.204 100 213,247,231,194 255,255,255,255 10.229.227.78 10.229.227.77 100 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.229.227.77 296 224.0.0.0 240.0.0.0 On-link 10.53.127.204 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.229.227.77 296 255.255.255.255 255.255.255.255 On-link 10.53.127.204 286 ================================================== ========================= Persistent Routes: None IPv6 Route Table ================================================== ========================= Active Routes: If Metric Network Destination Gateway 16 58:: / 0 On-link 1306:: 1 / 128 On-link 16 58 2001:: / 32 On-link 16 306 2001: 0:4137:9 e76: ea: b77: f51a: 1cb2/128 On-link 16 306 fe80:: / 64 On-link 26 286 fe80:: / 64 On-link 16 306 fe80:: ea: b77: f51a: 1cb2/128 On-link 26 286 fe80:: c073: 41b2: 852f: eb87/128 On-link 1306 ff00:: / 8 On-link 16 306 ff00:: / 8 On-link 26 286 ff00:: / 8 On-link ================================================== ========================= Persistent Routes: None C: \ Users \ Oleg>

  Read the article

• Share 3G connection over WiFi-LAN network

  - by kush.impetus

  This is how I have established network between my PC and my laptop at home (being novice in networking, it took me few days to achieve the feat). And it is working perfectly. I can easily share files between them. Laptop IP Address: 192.168.1.4 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 Desktop IP Address: 192.168.1.5 Subnet mask: 255.255.255.0 Default Gateway: 192.168.1.2 ASUS RT-N10+ Router IP Address: 192.168.1.4 Default Gateway: 192.168.1.2 I have connected the Desktop PC to the router using a LAN cable, and laptop to router over WiFi. Both, PC and laptop are running on Windows 7 OS, are on same HomeGroup, have same username / password. Also, I have connected the Ethernet cable to LAN port 1 of the router. Click here to view a graphical representation of the network. Can't post image here, because I don't have 10 reputation points. Now, what I want is use connect to Internet using a 3G USB modem on one device and share it over the network on the other. I tried Huawei and Micromax 3G USB modem. Both obtain a new IP address whenever I connect to Internet (means they have dynamic IPs). Rest, both have Subnet Mask as 255.255.255.255 and Default Gateway as 0.0.0.0. In that case, I cannot directly share Internet from the modem. Preferred DNS is blank for now in both, laptop and PC. What I am planning to do is to connect to Internet on laptop using the 3G modem and share the Internet connection over laptop's Wi-Fi (as hotspot) using Connectify, which I have done already. That, I suppose, will broadcast a static IP to connect to. Now what I can't figure out is that what changes should I make to the network settings of the router and the PC so that PC connects to the Internet broadcast by Connectify? Is that possible on the first hand? Please note that I am trying to implement the network without spending anything extra (for purchasing as USB WiFi adapter for PC, of course, which could have made the life lot easier for me). Thanks in advance

  Read the article

• Computer crashes on resume from standby almost every time

  - by Los Frijoles

  I am running Ubuntu 12.04 on a Core i5 2500K and ASRock Z68 Pro3-M motherboard (no graphics card, hd is a WD Green 1TB, and cd drive is some cheap lite-on drive). Since installing 12.04, my computer has been freezing after resume, but not every time. When I start to resume, it starts going normally with a blinking cursor on the screen and then sometimes it will continue on to the gnome 3 unlock screen. Most of the time, however, it will blink for a little bit and then the monitor will flip modes and shut off due to no signal. Pressing keys on the keyboard gets no response (num lock light doesn't respond, Ctrl-Alt-F1 fails to drop it into a terminal, Ctrl-Alt-Backspace doesn't work) and so I assume the computer is crashed. The worst part is, the logs look entirely normal. Here is my system log during one of these crashes and my subsequent hard poweroff and restart: Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-2, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-1, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[12419]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 21:54:43 kcuzner-desktop udevd[10448]: inotify_add_watch(6, /dev/dm-0, 10) failed: No such file or directory Jun 6 22:09:01 kcuzner-desktop CRON[9061]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:17:01 kcuzner-desktop CRON[22142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 22:39:01 kcuzner-desktop CRON[26909]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560822] show_signal_msg: 36 callbacks suppressed Jun 6 22:54:21 kcuzner-desktop kernel: [57905.560828] chromium-browse[9139]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:05:43 kcuzner-desktop kernel: [58586.415158] chromium-browse[21025]: segfault at 0 ip 00007f3a78efade0 sp 00007fff7e2d2c18 error 4 in chromium-browser[7f3a76604000+412b000] Jun 6 23:09:01 kcuzner-desktop CRON[13542]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jun 6 23:12:43 kcuzner-desktop kernel: [59006.317590] usb 2-1.7: USB disconnect, device number 8 Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319672] sd 7:0:0:0: [sdg] Synchronizing SCSI cache Jun 6 23:12:43 kcuzner-desktop kernel: [59006.319737] sd 7:0:0:0: [sdg] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Jun 6 23:17:01 kcuzner-desktop CRON[26580]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jun 6 23:19:04 kcuzner-desktop acpid: client connected from 29925[0:0] Jun 6 23:19:04 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30131 of process 30131 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 1 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30162 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 2 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30163 of process 30131 (n/a) owned by '104' RT at priority 5. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 3 threads of 1 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:07 kcuzner-desktop bluetoothd[1140]: Endpoint registered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Successfully made thread 30166 of process 30166 (n/a) owned by '104' high priority at nice level -11. Jun 6 23:19:07 kcuzner-desktop rtkit-daemon[1835]: Supervising 4 threads of 2 processes of 1 users. Jun 6 23:19:07 kcuzner-desktop pulseaudio[30166]: [pulseaudio] pid.c: Daemon already running. Jun 6 23:19:10 kcuzner-desktop acpid: client 2942[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client 29925[0:0] has disconnected Jun 6 23:19:10 kcuzner-desktop acpid: client connected from 1286[0:0] Jun 6 23:19:10 kcuzner-desktop acpid: 1 client rule loaded Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/HFPAG Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSource Jun 6 23:19:31 kcuzner-desktop bluetoothd[1140]: Endpoint unregistered: sender=:1.239 path=/MediaEndpoint/A2DPSink Jun 6 23:28:12 kcuzner-desktop kernel: imklog 5.8.6, log source = /proc/kmsg started. Jun 6 23:28:12 kcuzner-desktop rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1053" x-info="http://www.rsyslog.com"] start Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's groupid changed to 103 Jun 6 23:28:12 kcuzner-desktop rsyslogd: rsyslogd's userid changed to 101 Jun 6 23:28:12 kcuzner-desktop rsyslogd-2039: Could not open output pipe '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Ericsson MBM Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Sierra Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Generic Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Huawei Jun 6 23:28:12 kcuzner-desktop modem-manager[1070]: <info> Loaded plugin Linktop Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Failed to init gatt_example plugin Jun 6 23:28:12 kcuzner-desktop bluetoothd[1072]: Listening for HCI events on hci0 Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> NetworkManager (version 0.9.4.0) is starting... Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> Read config file /etc/NetworkManager/NetworkManager.conf Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> VPN: loaded org.freedesktop.NetworkManager.pptp Jun 6 23:28:12 kcuzner-desktop NetworkManager[1080]: <info> DNS: loaded plugin dnsmasq Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset Jun 6 23:28:12 kcuzner-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu Sorry it's so huge; the restart happens at 23:28:12 I believe and all I see is that chromium segfaulted a few times. I wouldn't think a segfault from an individual program on the computer would crash it, but could that be the issue?

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >