Search Results

Search found 1250 results on 50 pages for 'jack daniels'.

Page 4/50 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Read only file system

  - by Jack Moon

  I'm running Ubuntu 12.10, Upon opening any shell I get the following error: /home/jack/.rbenv/libexec/rbenv-init: line 87: cannot create temp file for here-document: Read-only file system I realised this wasn't simply a rbenv issue, as any file I try to write to returns an error saying the system is Read-only. I don't know how else to describe my problem, each time I boot up the system goes through a disk check, where it supposedly fixes several errors in my disk. Here is my /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1cc4b2ab-a984-4516-ac25-6d64f5050244 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=4e0dfeae-701a-43ce-b5c6-65f15ab3d8e3 none swap sw 0 0 The entire file system is read-only. I've tried the following sudo fsck.ext4 -f /dev/sda1 which gave the following (shortened) output /dev/sda1: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sda1: ***** REBOOT LINUX ***** /dev/sda1: 1257080/45268992 files (1.0% non-contiguous), 50696803/181051904 blocks

  Read the article

• Activity Indicator not displaying based on whether the UIWebView is loading or not...

  - by Jack W-H

  Hi folks Sorry if this is an easy one. Basically, here is my code: MainViewController.h: // // MainViewController.h // Site // // Created by Jack Webb-Heller on 19/03/2010. // Copyright __MyCompanyName__ 2010. All rights reserved. // #import "FlipsideViewController.h" @interface MainViewController : UIViewController <UIWebViewDelegate, FlipsideViewControllerDelegate> { IBOutlet UIWebView *webView; IBOutlet UIActivityIndicatorView *spinner; } - (IBAction)showInfo; @property(nonatomic,retain) UIWebView *webView; @property(nonatomic,retain) UIActivityIndicatorView *spinner; @end MainViewController.m: // // MainViewController.m // Site // // Created by Jack Webb-Heller on 19/03/2010. // Copyright __MyCompanyName__ 2010. All rights reserved. // #import "MainViewController.h" #import "MainView.h" @implementation MainViewController @synthesize webView; @synthesize spinner; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { NSURL *siteURL; NSString *siteURLString; siteURLString=[[NSString alloc] initWithString:@"http://www.site.com"]; siteURL=[[NSURL alloc] initWithString:siteURLString]; [webView loadRequest:[NSURLRequest requestWithURL:siteURL]]; [siteURL release]; [siteURLString release]; [super viewDidLoad]; } - (void)flipsideViewControllerDidFinish:(FlipsideViewController *)controller { [self dismissModalViewControllerAnimated:YES]; } - (void)webViewDidFinishLoad:(UIWebView *)webView { [spinner stopAnimating]; spinner.hidden=FALSE; NSLog(@"viewDidFinishLoad went through nicely"); } - (void)webViewDidStartLoad:(UIWebView *)webView { [spinner startAnimating]; spinner.hidden=FALSE; NSLog(@"viewDidStartLoad seems to be working"); } - (IBAction)showInfo { FlipsideViewController *controller = [[FlipsideViewController alloc] initWithNibName:@"FlipsideView" bundle:nil]; controller.delegate = self; controller.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal; [self presentModalViewController:controller animated:YES]; [controller release]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [spinner release]; [webView release]; [super dealloc]; } @end Unfortunately nothing is ever written to my log, and for some reason the Activity Indicator never seems to appear. What's going wrong here? Thanks folks Jack

  Read the article

• ATI Catalyst driver 12.8 is not using hardware acceleration on Precise

  - by Jack Wright

  I've been using Ubuntu and ATI Catalyst for years. On my clean install of Ubuntu 12.04 I've noticed that Catalyst 12.6 and then 12.8 are not actually using my HD5750 GPU for hardware acceleration - high CPU usage, zero GPU load. Everything installed correctly with no hassles, fglrxinfo and vainfo are correct as per this HowTo for Precise. I have an Ubuntu 10.04 with Catalyst 12.6 installation on the same hardware which does use the GPU - low CPU usage, high GPU load when transcodeing video files or playing video content. The VA-API drivers are not installed on the 10.04 build. They are not mentioned in this HowTo for Lucid. fgl_glxgears frame rates on Precise are a fifth of the rates on Lucid. LUCID jw@Kworld:~$ fgl_glxgears Using GLX_SGIX_pbuffer 16867 frames in 5.0 seconds = 3373.400 FPS 12523 frames in 5.0 seconds = 2504.600 FPS 13763 frames in 5.0 seconds = 2752.600 FPS PRECISE jw@NewWorld12:~$ fgl_glxgears Using GLX_SGIX_pbuffer 12905 frames in 5.0 seconds = 2581.000 FPS 3230 frames in 5.0 seconds = 646.000 FPS 517 frames in 5.0 seconds = 103.400 FPS 518 frames in 5.0 seconds = 103.600 FPS 6489 frames in 5.0 seconds = 1297.800 FPS This is glxgears running in fullscreen. In Lucid (10.04) I can't see the gears, they are spinning so fast, but in Precise (12.04) they are really sluggish. Has anyone else noticed a problem like this? Cheers, Jack.

  Read the article

• Why is C++ predominant in programming contests and competitions?

  - by daniels

  I understand that C++ is a very fast language, but ain't C just as fast, or faster in some cases? Then you might say that C++ has OOP, but the amount of OOP you need for most programming puzzles is not that big, and in my opinion C would be able handle that. Here's why I am asking this: I am very interested in programming contests and competitions, and I am used to coding in C on those. However, I noticed that the vast majority of people use C++ (e.g., 17 out of 25 finalists on Google Code Jam 2011 used it, while no one used C), so I am wondering if I am at a disadvantage going with C. Apart from the Object Orientation, what makes C++ a more suitable language for programming competitions? What are the features of the language I should learn and use to perform better on the competitions? For background, I consider myself pretty proficient in C, but I am just starting to learn C++.

  Read the article

• In an Entity-Component-System Engine, How do I deal with groups of dependent entities?

  - by John Daniels

  After going over a few game design patterns, I have settle with Entity-Component-System (ES System) for my game engine. I've reading articles (mainly T=Machine) and review some source code and I think I got enough to get started. There is just one basic idea I am struggling with. How do I deal with groups of entities that are dependent on each other? Let me use an example: Assume I am making a standard overhead shooter (think Jamestown) and I want to construct a "boss entity" with multiple distinct but connected parts. The break down might look like something like this: Ship body: Movement, Rendering Cannon: Position (locked relative to the Ship body), Tracking\Fire at hero, Taking Damage until disabled Core: Position (locked relative to the Ship body), Tracking\Fire at hero, Taking Damage until disabled, Disabling (er...destroying) all other entities in the ship group My goal would be something that would be identified (and manipulated) as a distinct game element without having to rewrite subsystem form the ground up every time I want to build a new aggregate Element. How do I implement this kind of design in ES System? Do I implement some kind of parent-child entity relationship (entities can have children)? This seems to contradict the methodology that Entities are just empty container and makes it feel more OOP. Do I implement them as separate entities, with some kind of connecting Component (BossComponent) and related system (BossSubSystem)? I can't help but think that this will be hard to implement since how components communicate seem to be a big bear trap. Do I implement them as one Entity, with a collection of components (ShipComponent, CannonComponents, CoreComponent)? This one seems to veer way of the ES System intent (components here seem too much like heavy weight entities), but I'm know to this so I figured I would put that out there. Do I implement them as something else I have mentioned? I know that this can be implemented very easily in OOP, but my choosing ES over OOP is one that I will stick with. If I need to break with pure ES theory to implement this design I will (not like I haven't had to compromise pure design before), but I would prefer to do that for performance reason rather than start with bad design. For extra credit, think of the same design but, each of the "boss entities" were actually connected to a larger "BigBoss entity" made of a main body, main core and 3 "Boss Entities". This would let me see a solution for at least 3 dimensions (grandparent-parent-child)...which should be more than enough for me. Links to articles or example code would be appreciated. Thanks for your time.

  Read the article

• apt-get not working

  - by Dave Daniels

  Everything I try with apt-get fails. I am installing Ubuntu server for the first time. It is version 12.04 LTS. When I run: apt-get update I get failed to fetch http://gb.whatever goes here...... If I run apt-get install install build-essential I get "unable to locate package build-essential" I have looked at the sources.list but do not know what should and shouldn't be in there. This is the current content of sources.list: # See help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://gb.archive.ubuntu.com/ubuntu precise main restricted deb-src http://gb.archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://gb.archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://gb.archive.ubuntu.com/ubuntu precise-updates main restricted

  Read the article

• Domain Transfer Protection - need advice

  - by Jack

  Hey, I am about to purchase a domain name for a bit of money. I do not personally know the person who I am purchasing the domain name from, we have only chatted via email. The proposed process for the transfer is: The owner of the domain lowest the domain name security and emails me the domain password, I request the transfer After the request, I transfer the money via PayPal When the money has been cleared the current domain name owner confirms the transfer via the link that he receives in that email I wait for it to be transferred. The domain is currently registered with DirectNIC - http://www.directnic.com/ Is this the best practice? Seeing I am paying a bit of money for this domain name, I am worried that after the money has been cleared that I won't see the domain name or hear from the current domain name owner again. Is there a 'domain governing body' which I can report to if this is the case? Is the proposed transfer process the best solution? Any advice would be awesome. Thanks! Jack

  Read the article

• U1 Music Streaming: Is it possible to have album cover art for OGG files?

  - by Will Daniels

  Just started trying out the U1 music streaming service and so far very pleased. The one issue I have that could be a deal-breaker when it comes time to pay up is that half of my collection is OGG Vorbis and I cannot find a way to show album art for OGG files. I already tried adding a cover.jpg to the folder and embedding the image via easyTAG (works for MP3 but not OGG). Does anybody have a solution besides transcoding them all to MP3? Will this likely be supported in future?

  Read the article

• Jump into Android or learn Java basics first?

  - by daniels

  I am quite proficient in C and know some C++, but never touched Java. Recently I got an idea for an app which I think has potential, and I want to develop it. I am planning to go Android first, cause it doesn't require a mac/iPhone. So my question is: can I go straight to learning Android development, picking up the Java syntax as I go along and need it (after all I don't think it's much different from C/C++), or should I take a couple of weeks to learn the basics of Java first and then start with Android development?

  Read the article

• Joining a company to get experience vs. going alone [closed]

  - by daniels

  My goal is to build a successful web startup, say the next Digg or Twitter, and I am in doubt regarding what is the best route to follow as a programmer. I see basically two options: Get an internship/job with an established online company, so that I could get a mentor and learn from more experienced programmers, learn their processes, methodology and so on. I could do this for 1-2 years, and then quit to start working on my own stuff. Start working on my own projects right away, starting with small ones and moving up gradually. This would give me more control on the things I would be working with, but I would lack contact with more experienced people, so I would need to figure basic things on my own. Doing both is not an option in my opinion, cause I would need to put a lot of effort/time into each if I was to learn/improve as a programmer. So is one route definitely better than the other? Is there a third one I am not considering? Background: I already work by myself developing content-based websites and doing SEO, and I am decent at it so money is not a problem. Last year I started learning to program, first by myself and now I enrolled in a CS degree on a good university.

  Read the article

• PHP: Displaying Dom object and Creating xml file

  - by pavun_cool

  <?php $books = array(); $books [] = array( 'title' => 'PHP Hacks', 'author' => 'Jack Herrington', 'publisher' => "O'Reilly" ); $books [] = array( 'title' => 'Podcasting Hacks', 'author' => 'Jack Herrington', 'publisher' => "O'Reilly" ); $doc = new DOMDocument(); $doc->formatOutput = true; $r = $doc->createElement( "books" ); $doc->appendChild( $r ); foreach( $books as $book ) { $b = $doc->createElement( "book" ); $author = $doc->createElement( "author" ); $author->appendChild( $doc->createTextNode( $book['author'] ) ); #$author->appendChild( $doc->createTextNode( 'pavunkumar')); $new = $doc->createElement("Developer"); $a=$doc->createTextNode('I am developer ' ); $new->appendChild($a); $b->appendChild( $author ); $b->appendChild($new); $b->appendChild($new); $title = $doc->createElement( "title" ); $title->appendChild( $doc->createTextNode( $book['title'] ) ); $b->appendChild( $title ); $publisher = $doc->createElement( "publisher" ); $publisher->appendChild( $doc->createTextNode( $book['publisher'] ) ); $b->appendChild( $publisher ); $r->appendChild( $b ); } echo $doc->SaveXml() ; ?> When I run this code in command line. I am getting following things <?xml version="1.0"?> <books> <book> <author>Jack Herrington</author> <Developer>I am developer </Developer> <title>PHP Hacks</title> <publisher>O'Reilly</publisher> </book> <book> <author>Jack Herrington</author> <Developer>I am developer </Developer> <title>Podcasting Hacks</title> <publisher>O'Reilly</publisher> </book> </books> When I run the code in web browser it gives me following things Jack Herrington I am developer O'Reilly Jack Herrington I am developer O'Reilly I want to above output to be like command line output. And one more things is that instead of displaying , how could I create a xml file using $doc Dom object.

  Read the article

• copy rows before updating them to preserve archive in Postgres

  - by punkish

  I am experimenting with creating a table that keeps a version of every row. The idea is to be able to query for how the rows were at any point in time even if the query has JOINs. Consider a system where the primary resource is books, that is, books are queried for, and author info comes along for the ride CREATE TABLE authors ( author_id INTEGER NOT NULL, version INTEGER NOT NULL CHECK (version > 0), author_name TEXT, is_active BOOLEAN DEFAULT '1', modified_on TIMESTAMP DEFAULT CURRENT_TIMESTAMP, PRIMARY KEY (author_id, version) ) INSERT INTO authors (author_id, version, author_name) VALUES (1, 1, 'John'), (2, 1, 'Jack'), (3, 1, 'Ernest'); I would like to be able to update the above like so UPDATE authors SET author_name = 'Jack K' WHERE author_id = 1; and end up with 2, 1, Jack, t, 2012-03-29 21:35:00 2, 2, Jack K, t, 2012-03-29 21:37:40 which I can then query with SELECT author_name, modified_on FROM authors WHERE author_id = 2 AND modified_on < '2012-03-29 21:37:00' ORDER BY version DESC LIMIT 1; to get 2, 1, Jack, t, 2012-03-29 21:35:00 Something like the following doesn't really work CREATE OR REPLACE FUNCTION archive_authors() RETURNS TRIGGER AS $archive_author$ BEGIN IF (TG_OP = 'UPDATE') THEN -- The following fails because author_id,version PK already exists INSERT INTO authors (author_id, version, author_name) VALUES (OLD.author_id, OLD.version, OLD.author_name); UPDATE authors SET version = OLD.version + 1 WHERE author_id = OLD.author_id AND version = OLD.version; RETURN NEW; END IF; RETURN NULL; -- result is ignored since this is an AFTER trigger END; $archive_author$ LANGUAGE plpgsql; CREATE TRIGGER archive_author AFTER UPDATE OR DELETE ON authors FOR EACH ROW EXECUTE PROCEDURE archive_authors(); How can I achieve the above? Or, is there a better way to accomplish this? Ideally, I would prefer to not create a shadow table to store the archived rows.

  Read the article

• Upgrade from Etch to Lenny, server no longer reboots

  - by Jack

  Hi, I just upgraded my (remote) webserver to Lenny from Etch. and no real issue occurs except that I cannot reboot that server. (I can only start in a rescue mode) I recall that a MBR change performed and I am wondering if that could be the reason for this failure. Would someone know how I can revert this MBR change ? I had switched back to my previous linux kernel, still cannot reboot. I would appreciate your help. thanks Jack

  Read the article

• Service monitoring service, which I can ping instead of getting pinged

  - by Jack Juiceson

  I'm looking for a service, which can send me an alert if my program didn't ping(some http request) in X minutes. Pretty much like any service monitoring, but instead of service pinging my server I want, my program to ping the monitor service. This is because our program, can't get incoming connections, yet we need to monitor it's alive. And easiest for us will be to have a service we can ping. Thank you, - Jack

  Read the article

• Static background noise while using new headset Ubuntu 13.04

  - by ThundLayr

  Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

  Read the article

• Why does 3.5 mm audio out work through headphones but not through external speakers?

  - by Rickster

  I have a computer that has a 3.5 mm audio jack on the front of it. The computer itself has no speakers, so this is the only way to hear sound. If I plug headphones into it, the audio properly plays through the headphones, and if I plug in external speakers it used to play through them as well. Just today I turned on my computer and the audio no longer plays through the speakers, but if I plug in the headphones instead it works. The speakers aren't broken, as both the speakers and headphones work in my iPod and play music. I thought that 3.5 mm jacks could not send data back to the computer, and the computer had no way of differentiating between different devices plugged into the jack. If this is true, how is it that the computer plays audio through the headphones but not through speakers plugged into the same 3.5 mm jack, and both devices are functional? Or is my knowledge on 3.5 mm jacks incorrect? I don't believe drivers are important, as the same driver runs the 3.5 mm jack for all devices, but if necessary I can provide additional information. Any ideas would be appreciated. Thanks!

  Read the article

• Network Transfer Rate on SMB/FTP

  - by Jack Sleight

  Hi, We're trying to optimise our network transfer rate from the client PCs to the file server, but having no luck. If I run an iperf test between a client PC (Windows XP) and our server (Linux) with a large TCP window size (the default is 8kb) I can get 60 Mbps. But when I run an SMB transfer speed test all I get is around 35 Mbps. When I run an FTP transfer speed test all I get is around 32 Mbps. I thought this was to do with the TCP window size, but I have now increased that to 256960 and it made no difference at all. Any ideas what I'm doing wrong? Or is 35 Mbps all I should expect? Cheers, Jack

  Read the article

• Alternatives to FTP

  - by Jack Hickerson

  I need to share files with clients outside of my business and unfortunately our FTP server is becoming too much of a hassle (with regards to clients use of an ftp client and creating password protected downloads based on customized account privileges) Essentially, I need: a remote service that mimics an FTP server with a web interface (easy for basic internet users to comprehend). over 100gb of storage file transfer size over 2gb customizable user account privileges (password protected downloads) secure storage and data transfer preferably less then $100/mo I have already looked into some services that almost meet my requirements (StreamFile.com, box.net, onehub.com, filesanywhere.com)- has anyone used a service they would recommend? cheers, jack

  Read the article

• Restore audio settings - cannot open mixer: No such file or directory

  - by Alfred M.

  The internal speaker of my laptop never functionned under Ubuntu. I tried to follow indication on the web and now the jack audio does not work either. The graphic interface for audio management now displays a 'dummy output' instead of the three possible outputs I used to have (one of them was working for the jack output). In a terminal alsamixer raises an error: cannot open mixer: No such file or directory I did try to remove and reinstall alsa-utils but it did not change anything. This happened after a failed atempt to install alsa-driver-linuxant_1.0.23.1_all.deb from here. My sound card seems to be not recognised anymore. After reboot I have no more the sound icon in menu bar the upper right corner. I think I have removed my sound card driver. Indeed, the command sudo lshw -class multimedia indicated audi device as unclaimed. Any idea how I could revert to a better situation (that is jack support and alsa working)? EDIT: The command lspci -nnk | grep -iEA3 audio gives lspci -nnk | grep -iEA3 audio 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:1893] 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03)

  Read the article

• Question about Domain Forwarding [beginner]

  - by Jack W-H

  Hello folks Just a quick beginner's question here. I have a webapp located at domainxyz.com, and it generates short URLs for long posts automatically - so rather than visit domainxyz.com/reallylongpostnamehere I can just type domainxyz.com/a5c and be taken there automatically. However, I've bought a shorter domain name - short.com - and I want to be able to visit short.com/a5c and be redirected (or forwarded) to domainxyz.com/a5c. Or short.com/7f0 -- domainxyz.com/7f0. This way, although it seems a tad illogical it saves me setting up another hosting account on short.com to deal with the URL shortening. Is this possible? I realise you can forward domains, but, can you forward domains AND forward the URL segments? Thanks! Jack

  Read the article

• Web and email host migration - Limitations and suggestions to make the process as easy as possible.

  - by Jack Hickerson

  I developed a website for a friend of mine to replace his current 'all inclusive' provider (website creation, updating, web hosting, email hosting). I've already paid for a hosting service which currently houses the website which I have created. I need to cancel the previous service provider to get the domain migrated to the new host, however I will still need to transfer or recreate all of the email addresses that everyone in his company had previously. Is there an easy way migrate email accounts (still linked to the same domain) while migrating to a different host? Will any methods allow all users to retain their archived emails and folder structures? What is the process to do so. Because the current provider is a rather large website development and hosting company, I will have limited access to the data they have stored. As you can probably tell, my knowledge in this area is very limited - any/all suggestions you may have would be greatly appreciated. Thanks in advance. -Jack

  Read the article

• How to rewrite using htaccess if the file exists in another folder?

  - by Jack

  We are trying to rewrite to another folder if the file does not exist in the document root, but does exist in the other folder. The other folder is in a completely different location, which is located using "Alias" in the vhosts. So, what we have so far (from this post How to rewrite URI from root if file exists in folder?) is: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !^/legacy/ RewriteRule ^(.*)$ legacy/$1 [QSA,L] This works to an extent, but seems to direct everything to the legacy folder, not just when the file doesn't exist in the first location and does exist in legacy. Thanks in advance for any help, Jack.

  Read the article

• Hosts file in Apache keep changing for OS Linux Redhat [on hold]

  - by jack f

  I have installed Apache server. Two clients ex client_1 and client_2. The operation that we are performing on client_1 reflecting to client_2. We have etc/hosts file in our software install location which is keep on changing for client_2 with client_1 IP address. If I correct the entries in hosts file to client_2 also in the next few minuets it is changing automatically to the client_1(if we start the client_1 service). Please explain the use of hosts file and where and when it will change by Apache service. The hosts file in the location /etc/hosts/ for the both clients are same ============================================= Do not remove the following line, or various programs that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost Local LAN 190.0.0.1 client_1.Example.com client_1 190.0.0.2 client_2.Example.com client_2 HR LAN 10.1.74.2 client_1hr peer 10.1.74.3 client_2hr ESP LAN 10.69.69.1 client_1esp 10.69.69.2 client_2esp Any help will be appreciated. Thanks in advance, Jack F

  Read the article

• Problems when loop over a series of ssh-ed commands

  - by Jack Medley

  I have a series of server machines which I want to run the same command on. Each command takes hours and (even though I am running the commands using nohup and setting them to run in the background) I have to wait for each to finish before the next starts. Here is roughly how I have set it up: On the host machines: for i in {1..9}; do ssh RemoteMachine${i} ./RunJobs.sh; done Where RunJobs.sh on each remote machine is: source ~/.bash_profile cd AriadneMatching for file in FileDirectory/Input_*; do nohup ./Executable ${file} & done exit Does anyone know of a way such that I dont have to wait for each job to finish before the next starts? Or alternatively a better way of doing this, I have a feeling what I am do is fairly sub-optimal. Cheers, Jack

  Read the article

• Catch headset pause/play keypresses in Windows

  - by akshay2000

  I have a new Ultrabook which has single audio jack for input and output instead for separate 3.5 mm jacks we used to have on older machines. The jack is probably similar to American Audio Jack specification or like the one found on Macbook Pro. I have tried to use it with the Apple, HTC, Nokia earphones which ship with most of the smartphones. Microphone on the headset works the way it should. Thing is that the headsets also come with remote controls to control volume and playback. I am sure that those key presses are sent to the Windows. I was hoping to catch those events and bind those to actual media keys so that I can control music playback. I guess this happens on Macs. I want to do the similar thing on the Windows. I'm just not sure where I can catch the events. Driver level? Application level?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >