Search Results

Search found 26524 results on 1061 pages for 'laptop display'.

Page 4/1061 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Suspend/hibernate doesn't work on an Asus Laptop

  - by b1ackjosh

  I'm having issues suspending 11.04 on my new Asus U30sd-XA1 laptop, it's a new laptop on the market and I'm wondering if anyone else has had this issue and maybe have a fix for it. Basically whenever I close or put the laptop to sleep the screen goes black but the video card doesn't actually turn off, then the fan spins up even faster then it was before and gets hot. I did see that some people were having similar issues on other laptops and they set the kernal back. I'm newish to ubuntu and I'm not super comfortable messing with the kernal. If anyone has any other solutions that would be great. I am not using the 520m nvidia driver because it won't load unity after it's installed. I've also heard quite a few bad things about the drivers on the ubuntu forums, so I deactivated the driver.

  Read the article

• Laptop wakes while lid is closed and overheats

  - by user56601

  I'm running 12.04 on a toshiba L305D with athlon x2 (Already suspect this has something to do with it). My laptop will wake from suspend, presumably from wireless scanning. This is a serious bug as sleeping laptops are often inside bags, so the cooling system is effectively disabled. I can no longer seriously use Ubuntu when I have to worry about hardware damage every time I close the lid. There is shockingly lack of information about anything close to this. So many control panels have been removed or dumbed down, and everyone seems to want this behavior instead of the opposite, for servers or torrents of whatever. Well, most laptop users will 99% be likely to regularly put their laptop in a backpack or briefcase or other bag. Does anyone know how to fix this?

  Read the article

• Xubuntu dual monitor broke display

  - by Arman yaraee

  After I used Settings Display to enable my second monitor, my first display is not working anymore either. So I enabled both, then clicked save configuration since it was working and boom it crashed. Now when I start up, I can see the screen which I type my password but it goes black after that! When I boot into recovery mode it works fine but in Settings Display I don't see HDMI at all to disable it. Is there anyway to restore all display setting to default? (I can Ctrl+ALT+F1 and type commands but xrandr returns no results over there) EDIT I should clarify that system bios is set to laptop display

  Read the article

• Apple Cinema Display 23" and grub

  - by Joshua Pruitt

  As per the title, I'm running my display on an older 23" Apple Cinema Display (because I still love it, darn it). I'm pushing it with an ATI Radeon DVI dual-link PCIe card. It works just fine, except GRUB doesn't seem able to push out the 1920x1200 pixel resolution needed in order to show me a boot menu! So..., I keep a smaller second monitor connected as the primary display so that I can see the boot menu and boot the system (I don't use that display once booted). This is a goofy work-around, and I'd like to just use my single display exclusively to boot the machine. I found some grub codes for higher resolutions, but not for 1920x1200. Is it capable of this? Did I just miss it? Thanks in advance!!!

  Read the article

• Default program startup display

  - by Tony Martin

  I have a dual display setup and would like to be able to set which display a piece of software starts on. Most software seems to return to the last display but Stellarium always starts in the primary display. Does Linux have a way of forcing the startup display or is it something the individual program has to manage? Thanks. EDIT And with no changes on my part Stellarium is behaving nicely and remembering which screen it was on. Still nice to know if there is a way of forcing this.

  Read the article

• Ubuntu 11.10 - can't adjust brightness on my laptop

  - by Danny

  Using every method possible I'm unable to change my laptop brightness.. It's stuck on super max brightness.. Using the slider in the "screens" window int he control panel doesnt do anything, and using the fn keys doesn't do anything... Some info about my system: laptop is a MSI VR420 Running ubuntu 11.10 video card is an integrated intel card Used to work when I ran ubuntu 10.10 and earlier versions (not sure if it worked out of the box or if I inadvertly fixed it in previous versions while installing lots of other packages) Brightness slider on the "screen" window doesn't do anything, "dim when on battery -power" doesnt do anything When I use the fn+f4/f5 keys to adjust brightness there is a popup showing that its receving the input, but i can only go from between 0 brightness and max brightness.. (that is what the output is showing, the brightness does not change though) when attempting to change the brightness with fn+f4/f5 my dmesg log reports "ACPI: Failed to switch the brightness" Here are some outputs from some terminal commands, not sure if any of this is useful or not.. lspci - http://pastebin.com/EimZSGs3 "ls /sys/class/backlight/*/brightness" will output "/sys/class/backlight/intel_backlight/brightness" "cat /sys/class/backlight/intel_backlight/brightness" = 0 (when I use the fn+f4/f5) this will change betwene 0 and, but the actual brightness doesn't change) "cat /sys/class/backlight/intel_backlight/max_brightness" = 1 "lsmod | grep ^i915" = i915 505108 3 here is the list of things I've tried through searching google..... Edit /etc/default/grub?GRUB_CMDLINE_LINUX_DEFAULT: acpi_osi=Linux, acpi_backlight=vendor, nomodeset. (as well as several different combinations of these settings being on or off) Edit /etc/X11/xorg.conf (file doesn't exist on my system) Edit /proc/acpi/video/VGA/LCD/brightness (file doesn't exist) sudo setpci -s 00:02.0 F4.B=XX (does nothing) xbacklight -set XX (does nothing) I've tried about everything with no luck... The only thing i haven't tried is adding the ppa that someone suggested here: Unable to change brightness in a Lenovo laptop .... However according to the notes on the ppa.. all of the changes that are in the ppa are now actually apart of 11.10 and the ppa is only for people with 11.04.. Does anyone have any ideas for me? edit:by setting acpi=off in my /etc/default/grub file I was about to get my fn+f4/f5 keys to work, also "dim when display to save power" now makes my laptop dim when on battery power.. the dimness slider however still doesn't do anything.. also xbacklight doesn't do anything stil or any of the other methods... The thing i don't get is why setting acpi=off makes my fn+f4/f5 keys work? Isn't acpi supposed to be enables the backlight to be dimmed? does anyone know what ubuntu is deciding to do behind the scenes when acpi=off? Does anyone know what/if any features I might be losing with it off?

  Read the article

• Looking for an ultra portable laptop for Ubuntu

  - by prule

  Hi, I'm in the market for a new laptop, and portability is important since I really only use it when I'm travelling to and from work - primarily for programming. I've been searching high and low for something like this: less than 2kg hopefully Intel i5 (but negotiable) NO dvd drive - just don't need it 4G ram either 7200rpm disk or SSD (ssd preferable) 13 inch screen not too pricey (MacBook Air is about $1700 AUD) available in Australia The Dell Inspiron 13z and Lenovo Edge 13 look close, but I've not found anything that says I'm not going to have a fight with compatibility. The MacBook Air 13 looks like the PERFECT hardware, but I'm afraid it will just be easier to run MacOS than Ubuntu. I want to stay with Ubuntu, but the MacBook Air is only $1700 so I'm in danger of becoming another apple fanboi if I can't find anything competitive. Going through all the sites looking for stuff has been a huge waste of time System 76 doesn't deliver to Australia http://www.linux-laptop.net/ and http://www.linlap.com/ are hard work and not confidence inspiring http://www.vgcomputing.com.au/nsintro.html is hard work again, searching for every laptop they say has excellent compatibility on the web to find out what spec it is http://zareason.com/shop/Strata-Pro-13.html (at $1345 USD) looks interesting, but I've got no idea how much I'll get stung by customs importing Dell Inspiron 13z with i5, 4G, 320 7200rpm disk, ATI Mobility Radeon HD5430 - 1GB, Dell Wireless 1501 802.11b/g/n @ $1200 AUD seems like the only competitor but is it compatible? (Dell support offer no opinion - as far as they are concerned they only have 2 models that are certified for ubuntu) Am I worrying too much about the compatibility? Should I just go with Dell? Or switch to MacOS? (It would be good to have a searchable database that had the full machine specs, and compatibility - I'm thinking about building something... but I don't have much time right now...) Thanks. UPDATE I went with a MacBook Air. The price/weight/power was just right. Everything else was either too pricy (i5) or too heavy, or underpowered (SU7300 1.3GHz). Its a pity, because I didn't really want to leave Ubuntu. I'll still run it on my media center and spare (heavy) laptop.

  Read the article

• Settings for multiple monitors are not stored

  - by JJD

  I am running Ubuntu 12.04. on a Lenovo Thinkpad T400. I connected an external monitor as a second display. The laptop stands under the external screen. The laptop has a native resolution of 1440x900 (16:10), the external monitor 1280x1024 (5:4). There are two graphic adapters: one internal Intel GMA 4500 MHD and an discrete ATI card. Currently, the integrated Intel is enabled. I use the Display application to arrange the position of the monitors so it look like this: The problem: Whenever I restart my computer the configuration gets lost. First, the displays are mirrored instead of extended. I have to press Fn + F7 two times to switch to extended mode. Second, the Display settings still look like this: I know this worked once when I was running Ubuntu 10.10. I cannot tell since when it does not work. Do you know how I can permanently store the settings?

  Read the article

• I need advice on laptop purchase for university [closed]

  - by Systemic33

  I'm currently in University studying Computer Science/IT/Information Technology. And this first year i've managed to do with the laptop I had; an ASUS Eee PC 1000H with a 10.1" screen. But this is getting way too underpowered and small for programming more than just quick programming introduction excercises. So I'm looking to buy a more suitable laptop. It's not supposed to be a desktop replacement though, since I've got a pretty good desktop already with a 24" monitor. So the kinda laptop I want to buy is one suited for university. If this bears any significance, I'm working in Java atm, but I will likely work with lots of other things incl. web development. I'm looking to spend about $1700 plus/minus. And it should be powerful/big enough for working on programming projects as well as the usual university stuff like MATLAB, Maple, etc out "in the field", and sometimes for maybe a week when visiting my parents. What I'm looking at right now is the ASUS Zenbook UX31A with the 1920 x 1080 resolution on 13.3" IPS display. But I'm kinda nervous that this will be too petite for programming. In essence i'm looking for a powerfull computer, that has good enough battery, and looks good. I would love suggestions or any type of feedback, either with maybe a better choice, or input on how its like programming on 13" laptops. Very much thanks in advance for anyone who even went through all that! PS. I don't want a mac, or my inner karma would commit Seppuku xD But experiences from working on the 13" Macbook Air would kinda be equivalent to the Zenbook i'm considering, so I would love to hear that. tl;dr The quick brown fox jumps over the lazy dog ;)

  Read the article

• Lubuntu 12.04 on Acer laptop boots to blank blue screen

  - by WGCman

  My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

  Read the article

• Laptop battery charging capacity reduced to 52%

  - by omjaijagdish

  I have been using Ubuntu 11.04 on DELL Inspiron 14R (N5010) laptop for last three months. Before I switch to ubuntu my laptop battery used to give 2.5 hrs to 3 hrs back-up. But since I have been using ubuntu, it has been reduced to 1hr to 1.5 hrs at max. I tried following commands: $ cat /proc/acpi/battery/BAT0/state which gave result as present: yes capacity state: ok charging state: charged present rate: 1 mA remaining capacity: 4400 mAh present voltage: 12407 mV then I tried $ acpi -b the result was.. Battery 0: Unknown, 100% when I gave command as $ upower -i /org/freedesktop/UPower/devices/battery_BAT0 the result was.. native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 model: DELL W7H3N08 serial: 7114 power supply: yes updated: Sat Nov 24 11:25:34 2012 (21 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 48.4748 Wh energy-empty: 0 Wh energy-full: 48.4748 Wh energy-full-design: 48.9595 Wh energy-rate: 0.011017 W voltage: 12.408 V percentage: 100% **capacity: 52.9253%** technology: lithium-ion Someone please let me know, what is going wrong with my laptop? How can I get charging with full capacity?

  Read the article

• Laptop screen blank after login when external monitor is not connected

  - by Ramon Suarez

  Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

  Read the article

• Is there any way to execute something when closing the laptop's lid?

  - by Matias

  I'm wondering if there is any way to execute a program, run some command or anything else when closing the laptop's lid. My question aims to be generic, both for Windows and Linux. Something useful should be locking the laptop when closing the lid (Win + L in windows), or running expensive processes such as antivirus analysis etc. without doing it manually before closing the lid.

  Read the article

• How to install an alternative display manager?

  - by Mnementh

  I want to replace gdm with another display manager. I did 'aptitude install slim' (tried also xdm) and got a possibility to configure which display manager should be used. But after the reboot the display manager didn't got started. The Ubuntu-logo with the points simulating a progress goes on and on. If I press ESC, I can see, that slim (or xdm) was started, but I cannot see any login-screen. How can I use these alternative display managers? I use Ubuntu 10.10.

  Read the article

• How to make FN keys working on Asus G75 laptop

  - by c_inconnu

  I just bought a Asus G75 and I cannot make the FN keys working. I only found how to control the brightness (http://askubuntu.com/questions/126441/brightness-controls-doesnt-work-on-a-macbook-pro-5-5-ubuntu-12-04-lts) but the other keys are not recognized. I didn't know much things about key binding before digging, but I tried : testing with xev : no output... testing with keymap : no output... modprobe asus-laptop : FATAL: Error inserting asus_laptop (/lib/modules/3.2.0-25-generic/kernel/drivers/platform/x86/asus-laptop.ko): No such device (not sure what that means) modprobe asus-nb-wmi : FATAL: Error inserting asus_nb_wmi (/lib/modules/3.2.0-25-generic/drivers/platform/x86/asus-nb-wmi.ko): No such device (not sure what that means) Thanks for your advice David

  Read the article

• How to disable laptop internal keyboard

  - by Abhijit Navale

  I am using external usb keyboard. I want to disable laptop's internal keyboard using software. I know that i can just remove the internal keyboards wire and disconnect it physically, but i wanted to disable it using software so that later I can enable it by just executing a command in terminal easily. I am talking about disabling the keyboard and NOT the keyboard layout. I am having Hp-Compaq Presario A965 TU Laptop Intel Centrino Core 2 Duo(Freq. 2 GHz). I am using 64 bit Ubuntu Lucid Lynx.

  Read the article

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• How to install hardware drivers for my laptop

  - by John Flisk

  Everytime I change the OS I usually format my laptop. It is an HP tx-2 Touchsmart. It has a touchscreen and additional hardware that isn't working (i.e. volume control buttons and the network discovery) If I was on windows I would just download the hardware drivers from the HP website. How do I go about installing the software for the built-in hardware of my laptop? I am new to the community and I really want to get this computer working like it used to, to get the full Ubuntu experience. Please direct me, thank you.

  Read the article

• How do I port my Ubuntu from my Desktop to Laptop

  - by Bragboy

  Hi, I am currently using Ubuntu 10.04 installed on my desktop box. I have got a new laptop and I will be using it from now on. But I will have to do the setup all over again (setting up applications/updates). Plus many of my preferences and tweaks I've had in my desktop will be lost and those too I will have to all over again. Is there an easy way where I can just take image or something and use it in my laptop?? Any help/pointers/links are much appreciated.

  Read the article

• What does the kernel boot parameter "set acpi_osi=Linux" do?

  - by AIB

  I am facing an issue with brightness control in my laptop which has Intel HD graphics. So when I searched for a fix I found that a common suggestion is to edit the GRUB file line, GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" So could anyone tell me what the kernel boot option acpi_osi=Linux do? My OS is Ubuntu 10.10 64-bit version update The boot parameter acpi_osi is used as follows, acpi_osi= [HW,ACPI] Modify list of supported OS interface strings acpi_osi="string1" # add string1 -- only one string acpi_osi="!string2" # remove built-in string2 acpi_osi= # disable all strings But still I don't find a reason why this should fix any laptop issue!!

  Read the article

• Closing lid does not suspend laptop

  - by fgysin

  I'm on a Lenovo T400 laptop. In the past I had suspend problems on every second version of Ubuntu (at least it feels like it), but in 11.04 it was working perfectly. Now, after the upgrade to 11.10 closing the laptop lid does no longer initialize suspension. When I choose 'Suspend' from the shutdown menu it works perfectly, so this does not seem to be an issue with suspend itself. The options in System Settings>Power are of course set to suspend in case of closing the lid (both for battery and AC poer). Note: I have no idea if this is of any importance, but I'm running the gnome-session-fallback stuff, as I just hate the Unity desgin.

  Read the article

• Unrecognized Display

  - by Kevin

  I just installed a fresh copy of Ubuntu 12.04, and before I installed drivers, I was able to get my two monitor setup working just fine. However, after updating all my drivers and installing all the recommended software, my second display is no longer detected. My main display is called "Laptop" (which it was detected as the monitor name previously), but it is the only display listed. I tried to detect displays, nothing happened. The monitor is plugged in, and should be working fine - after all, it just was. How can I fix the problem of Ubuntu not listing my second monitor in the display settings?

  Read the article

• Unity freezes when laptop screen is closed

  - by Giacky98

  I have an Asus laptop running Ubuntu 12.04. It's configured to do nothing when the laptop screen is closed. But sometimes, when I close the screen and when I reopen it, after I move the mouse to reactivate the screen, my Unity interface is frozen and I can't click on anything. I can move the cursor, and if there's a music playing it keeps playing, but I can't click on anything. I can open a bash shell typing Ctrl+Alt+F2, but there I don't know what to do, I can only login and type sudo reboot to reboot the machine... Is there someone that has the same problem or that knows the solution?

  Read the article

• Lubuntu 13.10 - Laptop Loses wireless after sleep

  - by user206217

  I'm running Lubunu 13.10 on an hp G62 - I'm new to Lubuntu having used ubuntu previously, but I've made the switch as my laptop is now getting toward the lower end of acceptability, and I'm delighted with how well it runs. Anyway, I'm having an issue that if I close the lid of the laptop it won't reconnect to the wi-fi when I open it again, and I'm not sure how to even force it to scan for a network - I have to restart it at the moment - and then it always connects perfectly. The router is a BT Business Hub 405. Any help much appreciated - thank you.

  Read the article

• Fujitsu B6220 laptop, sometimes my desktop freezes upon resume from standby

  - by user89756

  I installed Ubuntu 11.10 on my Fujitsu Lifebook B6220 laptop just before 12.04 was released. I can not remember if I had this issue with Ubuntu 11.10 as I updated the install to 12.04 about a week after 12.04 came out. My problem is that sometimes upon resume from standby my desktop is frozen. The keyboard, touch pad, and touchscreen work, but there is no response from the desktop. I can ctrl-alt-f2 and log in and then from there I just reboot the computer. This happens about 50% of the time when I resume from standby but I have not noticed a distinct pattern. I have thought about reinstalling 12.04, since I upgraded 11.10 to 12.04 instead of a fresh install. But I have customized my laptop a lot and I would prefer to avoid reinstalling it, I'm not even sure if that would fix it. Anyone have a idea what might be the problem? If I should submit this as a bug, could someone point me in the right direction please? Thanks, Matt

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >