Search Results

Search found 93 results on 4 pages for 'newbies'.

Page 4/4 | < Previous Page | 1 2 3 4 

• What Counts for a DBA: Skill

  - by drsql

  “Practice makes perfect:” right? Well, not exactly. The reality of it all is that this saying is an untrustworthy aphorism. I discovered this in my “younger” days when I was a passionate tennis player, practicing and playing 20+ hours a week. No matter what my passion level was, without some serious coaching (and perhaps a change in dietary habits), my skill level was never going to rise to a level where I could make any money at the sport that involved something other than selling tennis balls at a sporting goods store. My game may have improved with all that practice but I had too many bad practices to overcome. Practice by itself merely reinforces what we know and what we can figure out naturally. The truth is actually closer to the expression used by Vince Lombardi: “Perfect practice makes perfect.” So how do you get to become skilled as a DBA if practice alone isn’t sufficient? Hit the Internet and start searching for SQL training and you can find 100 different sites. There are also hundreds of blogs, magazines, books, conferences both onsite and virtual. But then how do you know who is good? Unfortunately often the worst guide can be to find out the experience level of the writer. Some of the best DBAs are frighteningly young, and some got their start back when databases were stored on stacks of paper with little holes in it. As a programmer, is it really so hard to understand normalization? Set based theory? Query optimization? Indexing and performance tuning? The biggest barrier often is previous knowledge, particularly programming skills cultivated before you get started with SQL. In the world of technology, it is pretty rare that a fresh programmer will gravitate to database programming. Database programming is very unsexy work, because without a UI all you have are a bunch of text strings that you could never impress anyone with. Newbies spend most of their time building UIs or apps with procedural code in C# or VB scoring obvious interesting wins. Making matters worse is that SQL programming requires mastery of a much different toolset than most any mainstream programming skill. Instead of controlling everything yourself, most of the really difficult work is done by the internals of the engine (written by other non-relational programmers…we just can’t get away from them.) So is there a golden road to achieving a high skill level? Sadly, with tennis, I am pretty sure I’ll never discover it. However, with programming it seems to boil down to practice in applying the appropriate techniques for whatever type of programming you are doing. Can a C# programmer build a great database? As long as they don’t treat SQL like C#, absolutely. Same goes for a DBA writing C# code. None of this stuff is rocket science, as long as you learn to understand that different types of programming require different skill sets and you as a programmer must recognize the difference between one of the procedural languages and SQL and treat them differently. Skill comes from practicing doing things the right way and making “right” a habit.

  Read the article

• HttpUtility does not exist in the current context

  - by Shaihi

  I get this error when compiling a C# application. Looks like a trivial error, but I can't get around it. My setup is Windows 7 64 bit. Visual-Studio 2010 C# express B2Rel. I added a reference to System.Web.dll located at C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0, but it has a yellow exclamation symbol and I still get the above error. I also have the using System.Web declaration. What am I doing wrong? Update: After getting the prompt answer pointing me at the root cause, I searched a bit in Google to where it states that System.Web.dll is for the full framework. I did not find such a reference. For newbies like me, this blog summarizes the difference between the frameworks (client and full) nicely. I could not find a spot that says whether a certain Dll is supported in the client framework or not. I guess the exclamation mark in Visual Studio should be the first signal...

  Read the article

• Why did this work with Visual C++, but not with gcc?

  - by Carlos Nunez

  I've been working on a senior project for the last several months now, and a major sticking point in our team's development process has been dealing wtih rifts between Visual-C++ and gcc. (Yes, I know we all should have had the same development environment.) Things are about finished up at this point, but I ran into a moderate bug just today that had me wondering whether Visual-C++ is easier on newbies (like me) by design. In one of my headers, there is a function that relies on strtok to chop up a string, do some comparisons and return a string with a similar format. It works a little something like the following: int main() { string a, b, c; //Do stuff with a and b. c = get_string(a,b); } string get_string(string a, string b) { const char * a_ch, b_ch; a_ch = strtok(a.c_str(),","); b_ch = strtok(b.c_str(),","); } strtok is infamous for being great at tokenizing, but equally great at destroying the original string to be tokenized. Thus, when I compiled this with gcc and tried to do anything with a or b, I got unexpected behavior, since the separator used was completely removed in the string. Here's an example in case I'm unclear; if I set a = "Jim,Bob,Mary" and b="Grace,Soo,Hyun", they would be defined as a="JimBobMary" and b="GraceSooHyun" instead of staying the same like I wanted. However, when I compiled this under Visual C++, I got back the original strings and the program executed fine. I tried dynamically allocating memory to the strings and copying them the "standard" way, but the only way that worked was using malloc() and free(), which I hear is discouraged in C++. While I'm curious about that, the real question I have is this: Why did the program work when compiled in VC++, but not with gcc? (This is one of many conflicts that I experienced while trying to make the code cross-platform.) Thanks in advance! -Carlos Nunez

  Read the article

• Entity Framework 4 / POCO - Where to start?

  - by Basiclife

  Hi, I've been programming for a while and have used LINQ-To-SQL and LINQ-To-Entities before (although when using entities it has been on a Entity/Table 1-1 relationship - ie not much different than L2SQL) I've been doing a lot of reading about Inversion of Control, Unit of Work, POCO and repository patterns and would like to use this methodology in my new applications. Where I'm struggling is finding a clear, concise beginners guide for EF4 which doesn't assume knowledge of EF1. The specific questions I need answered are: Code first / model first? Pros/cons in regards to EF4 (ie what happens if I do code first, change the code at a later date and need to regenerate my DB model - Does the data get preserved and transformed or dropped?) Assuming I'm going code-first (I'd like to see how EF4 converts that to a DB schema) how do I actually get started? Quite often I've seen articles with entity diagrams stating "So this is my entity model, now I'm going to ..." - Unfortunately, I'm unclear if they're created the model in the designer, saved it to generate code then stopped any further auto-code generation -or- They've coded (POCO)? classes and the somehow imported them into the deisgner view? I suppose what I really need is an understanding of where the "magic" comes from and how to add it myself if I'm not just generating an EF model directly from a DB. I'm aware the question is a little vague but I don't know what I don't know - So any input / correction / clarification appreciated. Needless to say, I don't expect anyone to sit here and teach me EF - I'd just like some good tutorials/forums/blogs/etc. for complete entity newbies Many thanks in advance

  Read the article

• Is MVVM killing silverlight development?

  - by DeanMc

  This is a question I have had rattling around in my head for some time. I had a chat with a guy the other night who told me he would not be using the navigational framework because he could not figure out how it works with MVVM. As much as I tried to explain that patterns should be taken with a pinch of salt he would not listen. My point is this, patterns are great when they solve some problem. Sometimes only part of the pattern solves a particular problem while the other parts of it cause different problems. The goal of any developer is to build a solid application using a combination of patterns know how and foresight. I feel MVVM is becoming the one pattern to rule them all. As it is not directly supported by .Net some fancy business is needed to make it work. I feel that people are missing the point of the pattern, which is loosely coupled, testable code and instead jumping through hoops and missing out on great experiences trying to follow MVVM to the letter. MVVM is great but I wish it came with a warning or disclaimer for newbies as my fear is people will shy away from silverlight development for fear of being smacked with the mvvm stick. EDIT: Can I just add as an edit, I use and agree with MVVM as a pattern I know when it is and isn't feasible in my projects. My issue is with the encompassing nature it is taking, as if it HAS to be used as part of development. It is being used as an integral feature and not a pattern, which it is.

  Read the article

• Mutex example / tutorial ?

  - by Nav

  I've noticed that asking questions for the sake of creating a reference list etc. is encouraged in SO. This is one such question, so that anyone Googling for a mutex tutorial will find a good one here. I'm new to multithreading, and was trying to understand how mutexes work. Did a lot of Googling and this is the only decent tutorial I found, but it still left some doubts of how it works because I created my own program and the locking didn't work. One absolutely non-intuitive syntax of the mutex is pthread_mutex_lock( &mutex1 );, where it looks like the mutex is being locked, when what I really want to lock is some other variable. Does this syntax mean that locking a mutex locks a region of code until the mutex is unlocked? Then how do threads know that the region is locked? And isn't such a phenomenon supposed to be called critical section? In short, could you please help with the simplest possible mutex example program and the simplest possible explanation on the logic of how it works? I'm sure this will help plenty of other newbies.

  Read the article

• Java - How to declare table[i][j] elements as instance variables?

  - by JDelage

  All, I am trying to code a Connect4 game. For this, I have created a P4Game class and a P4Board class which represents the i X j dimensions of the Connect4 board. In P4Game, I have the following: public class P4Game{ //INSTANCE VARIABLES private int nbLines; private int nbColumns; private P4Board [][] position; //CONSTRUCTOR public P4Game(int nbLines, int nbColumns){ this.nbColumns = nbColumns; this.nbLines = nbLines; P4Board [][] position = new P4Board [nbLines][nbColumns]; //Creates the table to receive the instances of the P4Board object.*/ for (int i=0; i<nbLines; i++){ for (int j=0; j<nbColumns; j++){ this.position[i][j] = new P4Board(i,j); //Meant to create each object at (line=i, column=j) } } } This causes a NullPointerException in the nested loops where I mention this.position[i][j]. I reference those objects in other methods of this class so I need them to be instance variables. I suppose the exception is due to the fact that I have not listed the table element position[i][j] as an instance variable at the beginning of the class. my question to people here is (1) is my assumption correct, and if so (2) what would be the syntax to declare instance variables of this form? Thank you all for your help with what I realize is a very basic question. Hopefully it will also benefit other newbies. Cheers, JDelage

  Read the article

• So, I guess I can't use "&&" in the Python if conditional. What should I use in this case? Any help?

  - by Sergio Tapia

  Here's my code: # F. front_back # Consider dividing a string into two halves. # If the length is even, the front and back halves are the same length. # If the length is odd, we'll say that the extra char goes in the front half. # e.g. 'abcde', the front half is 'abc', the back half 'de'. # Given 2 strings, a and b, return a string of the form # a-front + b-front + a-back + b-back def front_back(a, b): # +++your code here+++ if len(a) % 2 == 0 && len(b) % 2 == 0: return a[:(len(a)/2)] + b[:(len(b)/2)] + a[(len(a)/2):] + b[(len(b)/2):] else: #todo! Not yet done. :P return I'm getting an error in the IF conditional. What am I doing wrong? Edit: I meant no arrogance here. Someone edited my question title to make it sound douchy. I was genuinely confused about what to use, didn't think 'and' would be a keyword. Please don't downvote as other newbies might be confused about it as well.

  Read the article

• Reviews Cheyney Group Marketing: What accounting softwares are available in the market for small businesses?

  - by user225556

  Accounting is the language of business, and good accounting software can save you hundreds of hours at the business equivalent of Berlitz. There's no substitute for an accounting pro who knows the ins and outs of tax law, but today's desktop packages can help you with everything from routine bookkeeping to payroll, taxes, and planning. Each package also produces files that you can hand off to an accountant as needed. Small-business managers have more accounting software options than ever, including subscription Web-based options that don't require their users to install or update software. Many businesses, however--including those that need to track large inventories or client databases, and those that prefer not to entrust their data to the cloud--may be happier with a desktop tool. We looked at three general-purpose, small-business accounting packages: Acclivity AccountEdgePro 2012 (both the product and the company were previously called MYOB), Intuit QuickBooks Premier 2012, and Sage's Sage 50 Complete 2013 (the successor to Peachtree Complete). All three packages offer a solid array of tools for tracking income and expenses, invoicing, managing payroll, and creating reports. These full-featured and highly mature programs don't come cheap. Acclivity AccountEdge Pro, at $299, is the least expensive; and prices climb if you opt to use common time-saving add-ons such as payroll services, or if you add licenses for multiple user accounts. All three are solid on the basics, but they have distinct differences in style and focus. The more you know about your accounting requirements, the more closely you'll want to look at the software you're thinking of buying. Sage 50 Complete should appeal most to people who understand the fine points of accounting and can use the product's many customization features (especially for businesses that manage inventory). QuickBooks works hard to appeal to newbies who need only the basics and might be intimidated by the level of detail and technical language exposed in the other two packages. At the same time, it also has a slew of third-party add-ons that meet specific needs and greatly expand its capabilities. AccountEdge Pro balances accessibility with a strong feature set at an affordable price. It's especially suitable for businesses that need to provide simultaneous access to multiple users.

  Read the article

• Reviews Cheyney Group Marketing: What accounting softwares are available in the market for small businesses?

  - by user224313

  Accounting is the language of business, and good accounting software can save you hundreds of hours at the business equivalent of Berlitz. There's no substitute for an accounting pro who knows the ins and outs of tax law, but today's desktop packages can help you with everything from routine bookkeeping to payroll, taxes, and planning. Each package also produces files that you can hand off to an accountant as needed. Small-business managers have more accounting software options than ever, including subscription Web-based options that don't require their users to install or update software. Many businesses, however--including those that need to track large inventories or client databases, and those that prefer not to entrust their data to the cloud--may be happier with a desktop tool. We looked at three general-purpose, small-business accounting packages: Acclivity AccountEdgePro 2012 (both the product and the company were previously called MYOB), Intuit QuickBooks Premier 2012, and Sage's Sage 50 Complete 2013 (the successor to Peachtree Complete). All three packages offer a solid array of tools for tracking income and expenses, invoicing, managing payroll, and creating reports. These full-featured and highly mature programs don't come cheap. Acclivity AccountEdge Pro, at $299, is the least expensive; and prices climb if you opt to use common time-saving add-ons such as payroll services, or if you add licenses for multiple user accounts. All three are solid on the basics, but they have distinct differences in style and focus. The more you know about your accounting requirements, the more closely you'll want to look at the software you're thinking of buying. Sage 50 Complete should appeal most to people who understand the fine points of accounting and can use the product's many customization features (especially for businesses that manage inventory). QuickBooks works hard to appeal to newbies who need only the basics and might be intimidated by the level of detail and technical language exposed in the other two packages. At the same time, it also has a slew of third-party add-ons that meet specific needs and greatly expand its capabilities. AccountEdge Pro balances accessibility with a strong feature set at an affordable price. It's especially suitable for businesses that need to provide simultaneous access to multiple users.

  Read the article

• Slide Creation Checklist

  - by Daniel Moth

  PowerPoint is a great tool for conference (large audience) presentations, which is the context for the advice below. The #1 thing to keep in mind when you create slides (at least for conference sessions), is that they are there to help you remember what you were going to say (the flow and key messages) and for the audience to get a visual reminder of the key points. Slides are not there for the audience to read what you are going to say anyway. If they were, what is the point of you being there? Slides are not holders for complete sentences (unless you are quoting) – use Microsoft Word for that purpose either as a physical handout or as a URL link that you share with the audience. When you dry run your presentation, if you find yourself reading the bullets on your slide, you have missed the point. You have a message to deliver that can be done regardless of your slides – remember that. The focus of your audience should be on you, not the screen. Based on that premise, I have created a checklist that I go over before I start a new deck and also once I think my slides are ready. Turn AutoFit OFF. I cannot stress this enough. For each slide, explicitly pick a slide layout. In my presentations, I only use one Title Slide, Section Header per demo slide, and for the rest of my slides one of the three: Title and Content, Title Only, Blank. Most people that are newbies to PowerPoint, get whatever default layout the New Slide creates for them and then start deleting and adding placeholders to that. You can do better than that (and you'll be glad you did if you also follow item #11 below). Every slide must have an image. Remove all punctuation (e.g. periods, commas) other than exclamation points and question marks (! ?). Don't use color or other formatting (e.g. italics, bold) for text on the slide. Check your animations. Avoid animations that hide elements that were on the slide (instead use a new slide and transition). Ensure that animations that bring new elements in, bring them into white space instead of over other existing elements. A good test is to print the slide and see that it still makes sense even without the animation. Print the deck in black and white choosing the "6 slides per page" option. Can I still read each slide without losing any information? If the answer is "no", go back and fix the slides so the answer becomes "yes". Don't have more than 3 bullet levels/indents. In other words: you type some text on the slide, hit 'Enter', hit 'Tab', type some more text and repeat at most one final time that sequence. Ideally your outer bullets have only level of sub-bullets (i.e. one level of indentation beneath them). Don't have more than 3-5 outer bullets per slide. Space them evenly horizontally, e.g. with blank lines in between. Don't wrap. For each bullet on all slides check: does the text for that bullet wrap to a second line? If it does, change the wording so it doesn't. Or create a terser bullet and make the original long text a sub-bullet of that one (thus decreasing the font size, but still being consistent) and have no wrapping. Use the same consistent fonts (i.e. Font Face, Font Size etc) throughout the deck for each level of bullet. In other words, don't deviate form the PowerPoint template you chose (or that was chosen for you). Go on each slide and hit 'Reset'. 'Reset' is a button on the 'Home' tab of the ribbon or you can find the 'Reset Slide' menu when you right click on a slide on the left 'Slides' list. If your slides can survive doing that without you "fixing" things after the Reset action, you are golden! For each slide ask yourself: if I had to replace this slide with a single sentence that conveys the key message, what would that sentence be? This exercise leads you to merge slides (where the key message is split) or split a slide into many, if there were too many key messages on the slide in the first place. It can also lead you to redesign a slide so the text on it really is just explanation or evidence for the key message you are trying to convey. Get the length right. Is the length of this deck suitable for the time you have been given to present? If not, cut content! It is far better to deliver less in a relaxed, polished engaging, memorable way than to deliver in great haste more content. As a rule of thumb, multiply 2 minutes by the number of slides you have, add the time you need for each demo and check if that add to more than the time you have allotted. If it does, start cutting content – we've all been there and it has to be done. As always, rules and guidelines are there to be bent and even broken some times. Start with the above and on a slide-by-slide basis decide which rules you want to bend. That is smarter than throwing all the rules out from the start, right? Comments about this post welcome at the original blog.

  Read the article

• Walmart and Fusion Apps

  - by ultan o'broin

  Photograph: Misha Vaughan I attended Fusion Apps (yes, I know I am supposed to say "Oracle Fusion Applications", but stuffy old style guides are a turn-off in interwebs conversations) User Experience Advocate (FXA) training in Long Beach, California last week; a suitable location as ODTUG KSCOPE 11 was kicking off and key players were in the area. As a member of Oracle's Apps-UX team I know the Fusion Apps messaging, natch, and done some other Fusion Apps go-to-market content work too. For the messaging details themselves, see Lonneke Dikmans (@lonnekedikmans) great blog, by the way. However, I wanted some 'formal' training combined with the opportunity to meet and learn from people already out there delivering those messages. The idea in me reaching out to Misha Vaughan, Apps-UX FXA maven, to get me onto this training was that in addition to my UX knowledge, I could leverage my location in EMEA and hit up customer events more quickly and easily. Those local user groups do like to hear the voice of locals too you know (so I need to work on that mid-Atlantic accent). I'm looking forward to such opportunities. The training was all smashing stuff, just the right level of detail, delivered professionally and with great style and humor. I was especially honored to be paired off for my er, coaching with Debra Lilley (@debralilley), who shared with everyone all kinds of tips and insights from her experiences of delivering the message and demo. For me, that was the real power of the FXA event--the communal, conversational aspect--the meeting up with people who had done all this for real, the sharing in their experiences, while learning along with other newbies. Sorry, but that all-important social aspect doesn't work so well with remote meetings. Katie Candland (Apps-UX) gave us a great tour of the Fusion Apps demo and included some useful presentational tips too (any excuse to buy that iPad). It's clear to me that the Fusion Apps messaging and demos really come alive with real-world examples that local application users will recognize, and I picked up some "yes, that's my job made easier" scene-stealers from Debra and Karen Brownfield too, to add to the great ones already provided. This power of examples shouldn't surprise anyone, they've long been a mainstay of applications user assistance, popular with users. We'll offer customers different types of example topics in the Fusion Apps online help too (stay tuned), and we know from research how important those 3S's (stories, scenarios, and simulations) are to users when they consume and apply information. Well, we've got the simulation, now it's time for more stories and scenarios. If you get a chance to participate in an FXA event (whether you are an Oracle employee or otherwise), I'd encourage it. It's committing your time and energy for sure, but I got real bang for the buck from it for my everyday job too. Listening to the room's feedback on the application demo really brought our internal design work to life, and I picked up on some things that I need to follow up on (like how you alphabetically sort stuff in other languages). User experience is after all, about users. What will I be doing next, and what would I like to see happen? Obviously, I need to develop my story-telling links with the people I met in Long Beach and do some practicing with the materials, and then get out there and deliver them at a suitable location. The demo is what it is right now, and that's a super-rich demo that I know everyone will want to see and ask questions about. Then, as mentioned by attendees at the FXA event, follow up on those translated and localized messages for EMEA (and APAC), that deal with different statutory or reporting requirements of the target markets. Given my background I would say that, wouldn't I? However, language is part of the UX, and international revenue is greater than US-only revenue for Oracle, so yes dear, we all need to get over the fact that enterprise apps users don't all speak, or want to speak, American-English. Most importantly perhaps, the continued development of a strong messaging community between Oracle and partners and customers where we can swap and share those FXA messaging stories and scenarios about Fusion Apps in a conversational way. The more the better, a combination of online and face-to-face meetings. I must also mention the great dinner after the event at Parker's Lighthouse, and the fun myself and Andrew Gilmour (Apps-UX) had at our end of the table talking about just about everything except Fusion Apps with Ronald Van Luttikhuizen and Ben Prusinski (who now understands the difference between Cork and Dublin people. I hope). Thanks to all the Apps-UXers who helped bring the FXA training to town, and to Debra and all the others that I am too jetlagged to mention right who were instrumental in making it happen for me. Here's to the next one. And the Walmart angle? That was me doing my Robert Scoble (ScO'bilizer?)-style guerilla smart phone research in Walmart in Long Beach, before the FXA event. It's all about stories for me. You can read more about it on the appslab blog (see the comments).

  Read the article

• Too Many Kittens To Juggle At Once

  - by Bil Simser

  Ahh, the Internet. That crazy, mixed up place where one tweet turns into a conversation between dozens of people and spawns a blogpost. This is the direct result of such an event this morning. It started innocently enough, with this: Then followed up by a blog post by Joel here. In the post, Joel introduces us to the term Business Solutions Architect with mad skillz like InfoPath, Access Services, Excel Services, building Workflows, and SSRS report creation, all while meeting the business needs of users in a SharePoint environment. I somewhat disagreed with Joel that this really wasn’t a new role (at least IMHO) and that a good Architect or BA should really be doing this job. As Joel pointed out when you’re building a SharePoint team this kind of role is often overlooked. Engineers might be able to build workflows but is the right workflow for the right problem? Michael Pisarek wrote about a SharePoint Business Architect a few months ago and it’s a pretty solid assessment. Again, I argue you really shouldn’t be looking for roles that don’t exist and I don’t suggest anyone create roles to hire people to fill them. That’s basically creating a solution looking for problems. Michael’s article does have some great points if you’re lost in the quagmire of SharePoint duties though (and I especially like John Ross’ quote “The coolest shit is worthless if it doesn’t meet business needs”). SharePoinTony summed it up nicely with “SharePoint Solutions knowledge is both lacking and underrated in most environments. Roles help”. Having someone on the team who can dance between a business user and a coder can be difficult. Remember the idea of telling something to someone and them passing it on to the next person. By the time the story comes round the circle it’s a shadow of it’s former self with little resemblance to the original tale. This is very much business requirements as they’re told by the user to a business analyst, written down on paper, read by an architect, tuned into a solution plan, and implemented by a developer. Transformations between what was said, what was heard, what was written down, and what was developed can be distant cousins. Not everyone has the skill of communication and even less have negotiation skills to suit the SharePoint platform. Negotiation is important because not everything can be (or should be) done in SharePoint. Sometimes it’s just not appropriate to build it on the SharePoint platform but someone needs to know enough about the platform and what limitations it might have, then communicate that (and/or negotiate) with a customer or user so it’s not about “You can’t have this” to “Let’s try it this way”. Visualize the possible instead of denying the impossible. So what is the right SharePoint team? My cromag brain came with a fairly simpleton answer (and I’m sure people will just say this is a cop-out). The perfect SharePoint team is just enough people to do the job that know the technology and business problem they’re solving. Bridge the gap between business need and technology platform and you have an architect. Communicate the needs of the business effectively so the entire team understands it and you have a business analyst. Can you get this with full time workers? Maybe but don’t expect miracles out of the gate. Also don’t take a consultant’s word as gospel. Some consultants just don’t have the diversity of the SharePoint platform to be worth their value so be careful. You really need someone who knows enough about SharePoint to be able to validate a consultants knowledge level. This is basically try for any consultant, not just a SharePoint one. Specialization is good and needed. A good, well-balanced SharePoint team is one of people that can solve problems with work with the technology, not against it. Having a top developer is great, but don’t rely on them to solve world hunger if they can’t communicate very well with users. An expert business analyst might be great at gathering requirements so the entire team can understand them, but if it means building 100% custom solutions because they don’t fit inside the SharePoint boundaries isn’t of much value. Just repeat. There is no silver bullet. There is no silver bullet. There is no silver bullet. A few people pointed out Nick Inglis’ article Excluding The Information Professional In SharePoint. It’s a good read too and hits home that maybe some developers and IT pros need some extra help in the information space. If you’re in an organization that needs labels on people, come up with something everyone understands and go with it. If that’s Business Solutions Architect, SharePoint Advisor, or Guy Who Knows A Lot About Portals, make it work for you. We all wish that one person could master all that is SharePoint but we also know that doesn’t scale very well and you quickly get into the hit-by-a-bus syndrome (with the organization coming to a full crawl when the guy or girl goes on vacation, gets sick, or pops out a baby). There are too many gaps in SharePoint knowledge to have any one person know it all and too many kittens to juggle all at once. We like to consider ourselves experts in our field, but trying to tackle too many roles at once and we end up being mediocre jack of all trades, master of none. Don't fall into this pit. It's a deep, dark hole you don't want to try to claw your way out of. Trust me. Been there. Done that. Got the t-shirt. In the end I don’t disagree with Joel. SharePoint is a beast and not something that should be taken on by newbies. If you just read “Teach Yourself SharePoint in 24 Hours” and want to go build your corporate intranet or the next killer business solution with all your new found knowledge plan to pony up consultant dollars a few months later when everything goes to Hell in a handbasket and falls over. I’m not saying don’t build solutions in SharePoint. I’m just saying that building effective ones takes skill like any craft and not something you can just cobble together with a little bit of cursory knowledge. Thanks to *everyone* who participated in this tweet rush. It was fun and educational.

  Read the article

• Bootstrap toggleable tag

  - by user1869816

  I am a newbies to bootstrap. I have tried to play with the code to make a page with toggleable tag. However, I have checked my code for many times but I still can't find the problem in my code. Would anyone help me, please? <div class="row"> <div class="tabbable"> <ul class="nav nav-tabs" id="tabs" data-tabs="tabs"> <li class="active"><a href="#having_a" data-toggle="tab">Having a</a></li> <li><a href="#having_b" data-toggle="tab">Having b</a></li> <li><a href="#having_c" data-toggle="tab">Having c</a></li> </ul> <!-- content of the tab --> <div class="tab-content" id="tab-content"> <div class="tab-pane active" id="having_a"> <p>a</p> </div> <div class="tab-pane" id="having_b"> <p>b</p> </div> <div class="tab-pane" id="having_c"> <p>c</p> </div> </div> </div> <script type="text/javascript"> jQuery(document).ready(function ($) {$('#tabs').tab(); }); </script> </div> <hr> <footer> <p>&copy;2012</p> </footer> </div> <!-- /container --> <!-- Le javascript ================================================== --> <!-- Placed at the end of the document so the pages load faster --> <script src="js/jquery.js"></script> <script src="js/bootstrap-transition.js"></script> <script src="js/bootstrap-alert.js"></script> <script src="js/bootstrap-modal.js"></script> <script src="js/bootstrap-dropdown.js"></script> <script src="js/bootstrap-scrollspy.js"></script> <script src="js/bootstrap-tab.js"></script> <script src="js/bootstrap-tooltip.js"></script> <script src="js/bootstrap-popover.js"></script> <script src="js/bootstrap-button.js"></script> <script src="js/bootstrap-collapse.js"></script> <script src="js/bootstrap-carousel.js"></script>

  Read the article

• Java Logger API

  - by Koppar

  This is a more like a tip rather than technical write up and serves as a quick intro for newbies. The logger API helps to diagnose application level or JDK level issues at runtime. There are 7 levels which decide the detailing in logging (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST). Its best to start with highest level and as we narrow down, use more detailed logging for a specific area. SEVERE is the highest and FINEST is the lowest. This may not make sense until we understand some jargon. The Logger class provides the ability to stream messages to an output stream in a format that can be controlled by the user. What this translates to is, I can create a logger with this simple invocation and use it add debug messages in my class: import java.util.logging.*; private static final Logger focusLog = Logger.getLogger("java.awt.focus.KeyboardFocusManager"); if (focusLog.isLoggable(Level.FINEST)) { focusLog.log(Level.FINEST, "Calling peer setCurrentFocusOwner}); LogManager acts like a book keeper and all the getLogger calls are forwarded to LogManager. The LogManager itself is a singleton class object which gets statically initialized on JVM start up. More on this later. If there is no existing logger with the given name, a new one is created. If there is one (and not yet GC’ed), then the existing Logger object is returned. By default, a root logger is created on JVM start up. All anonymous loggers are made as the children of the root logger. Named loggers have the hierarchy as per their name resolutions. Eg: java.awt.focus is the parent logger for java.awt.focus.KeyboardFocusManager etc. Before logging any message, the logger checks for the log level specified. If null is specified, the log level of the parent logger will be set. However, if the log level is off, no log messages would be written, irrespective of the parent’s log level. All the messages that are posted to the Logger are handled as a LogRecord object.i.e. FocusLog.log would create a new LogRecord object with the log level and message as its data members). The level of logging and thread number are also tracked. LogRecord is passed on to all the registered Handlers. Handler is basically a means to output the messages. The output may be redirected to either a log file or console or a network logging service. The Handler classes use the LogManager properties to set filters and formatters. During initialization or JVM start up, LogManager looks for logging.properties file in jre/lib and sets the properties if the file is provided. An alternate location for properties file can also be specified by setting java.util.logging.config.file system property. This can be set in Java Control Panel ? Java ? Runtime parameters as -Djava.util.logging.config.file = <mylogfile> or passed as a command line parameter java -Djava.util.logging.config.file = C:/Sunita/myLog The redirection of logging depends on what is specified rather registered as a handler with JVM in the properties file. java.util.logging.ConsoleHandler sends the output to system.err and java.util.logging.FileHandler sends the output to file. File name of the log file can also be specified. If you prefer XML format output, in the configuration file, set java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter and if you prefer simple text, set set java.util.logging.FileHandler.formatter =java.util.logging.SimpleFormatter Below is the default logging Configuration file: ############################################################ # Default Logging Configuration File # You can use a different file by specifying a filename # with the java.util.logging.config.file system property. # For example java -Djava.util.logging.config.file=myfile ############################################################ ############################################################ # Global properties ############################################################ # "handlers" specifies a comma separated list of log Handler # classes. These handlers will be installed during VM startup. # Note that these classes must be on the system classpath. # By default we only configure a ConsoleHandler, which will only # show messages at the INFO and above levels. handlers= java.util.logging.ConsoleHandler # To also add the FileHandler, use the following line instead. #handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler # Default global logging level. # This specifies which kinds of events are logged across # all loggers. For any given facility this global level # can be overriden by a facility specific level # Note that the ConsoleHandler also has a separate level # setting to limit messages printed to the console. .level= INFO ############################################################ # Handler specific properties. # Describes specific configuration info for Handlers. ############################################################ # default file output is in user's home directory. java.util.logging.FileHandler.pattern = %h/java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter # Limit the message that are printed on the console to INFO and above. java.util.logging.ConsoleHandler.level = INFO java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter ############################################################ # Facility specific properties. # Provides extra control for each logger. ############################################################ # For example, set the com.xyz.foo logger to only log SEVERE # messages: com.xyz.foo.level = SEVERE Since I primarily use this method to track focus issues, here is how I get detailed awt focus related logging. Just set the logger name to java.awt.focus.level=FINEST and change the default log level to FINEST. Below is a basic sample program. The sample programs are from http://www2.cs.uic.edu/~sloan/CLASSES/java/ and have been modified to illustrate the logging API. By changing the .level property in the logging.properties file, one can control the output written to the logs. To play around with the example, try changing the levels in the logging.properties file and notice the difference in messages going to the log file. Example --------KeyboardReader.java------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; double num1, num2, product; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new InputStreamReader (System.in)); System.out.println ("Enter a line of input"); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"The line entered is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO,"The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST, " Token " + numTokens + " is: " + s2); } } } } ----------MyFileReader.java---------------------------------------------------------------------------------------- import java.io.*; import java.util.*; import java.util.logging.*; public class MyFileReader extends KeyboardReader { private static final Logger mylog = Logger.getLogger("samples.input.file"); public static void main (String[] args) throws java.io.IOException { String s1; String s2; // set up the buffered reader to read from the keyboard BufferedReader br = new BufferedReader (new FileReader ("MyFileReader.txt")); s1 = br.readLine(); if (mylog.isLoggable(Level.SEVERE)) { mylog.log (Level.SEVERE,"ATTN The line is " + s1); } if (mylog.isLoggable(Level.INFO)) { mylog.log (Level.INFO, "The line has " + s1.length() + " characters"); } if (mylog.isLoggable(Level.FINE)) { mylog.log (Level.FINE,"Breaking the line into tokens we get:"); } int numTokens = 0; StringTokenizer st = new StringTokenizer (s1); while (st.hasMoreTokens()) { s2 = st.nextToken(); numTokens++; if (mylog.isLoggable(Level.FINEST)) { mylog.log (Level.FINEST,"Breaking the line into tokens we get:"); mylog.log (Level.FINEST," Token " + numTokens + " is: " + s2); } } //end of while } // end of main } // end of class ----------MyFileReader.txt------------------------------------------------------------------------------------------ My first logging example -------logging.properties------------------------------------------------------------------------------------------- handlers= java.util.logging.ConsoleHandler, java.util.logging.FileHandler .level= FINEST java.util.logging.FileHandler.pattern = java%u.log java.util.logging.FileHandler.limit = 50000 java.util.logging.FileHandler.count = 1 java.util.logging.FileHandler.formatter = java.util.logging.SimpleFormatter java.util.logging.ConsoleHandler.level = FINEST java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter java.awt.focus.level=ALL ------Output log------------------------------------------------------------------------------------------- May 21, 2012 11:44:55 AM MyFileReader main SEVERE: ATTN The line is My first logging example May 21, 2012 11:44:55 AM MyFileReader main INFO: The line has 24 characters May 21, 2012 11:44:55 AM MyFileReader main FINE: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 1 is: My May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 2 is: first May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 3 is: logging May 21, 2012 11:44:55 AM MyFileReader main FINEST: Breaking the line into tokens we get: May 21, 2012 11:44:55 AM MyFileReader main FINEST: Token 4 is: example Invocation command: "C:\Program Files (x86)\Java\jdk1.6.0_29\bin\java.exe" -Djava.util.logging.config.file=logging.properties MyFileReader References Further technical details are available here: http://docs.oracle.com/javase/1.4.2/docs/guide/util/logging/overview.html#1.0 http://docs.oracle.com/javase/1.4.2/docs/api/java/util/logging/package-summary.html http://www2.cs.uic.edu/~sloan/CLASSES/java/

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #033

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Spatial Database Definition and Research Documents Here is the definition from Wikipedia about spatial database : A spatial database is a database that is optimized to store and query data related to objects in space, including points, lines and polygons. While typical databases can understand various numeric and character types of data, additional functionality needs to be added for databases to process spatial data types. Select Only Date Part From DateTime – Best Practice A very common question which I receive is how to only get Date or Time part from datetime value. In this blog post I explain the same in very simple words. T-SQL Paging Query Technique Comparison (OVER and ROW_NUMBER()) – CTE vs. Derived Table I have received few emails and comments about my post SQL SERVER – T-SQL Paging Query Technique Comparison – SQL 2000 vs SQL 2005. The main question was is this can be done using CTE? Absolutely! What about Performance? It is identical! Please refer above mentioned article for the history of paging. SQL SERVER – Cannot resolve collation conflict for equal to operation One of the very first error I ever encountered in my career was to resolve this conflict. I have blogged about it and I have realized that many others like me who are facing this error. LEN and DATALENGTH of NULL Simple Example Here is the question for you what is the LEN of NULL value? Well it is very easy – just read the blog. Recovery Models and Selection Very simple and easy explanation of the Database Backup Recovery Model and how to select the best option for you. Explanation SQL SERVER Hash Join Hash join gives best performance when two more join tables are joined and at-least one of them have no index or is not sorted. It is also expected that smaller of the either of table can be read in memory completely (though not necessary). Easy Sequence of SELECT FROM JOIN WHERE GROUP BY HAVING ORDER BY SELECT yourcolumns FROM tablenames JOIN tablenames WHERE condition GROUP BY yourcolumns HAVING aggregatecolumn condition ORDER BY yourcolumns NorthWind Database or AdventureWorks Database – Samples Databases In this blog post we learn how to install Northwind database. I also shared the source where one can download this database as that is used in many examples on MSDN help files. sp_HelpText for sp_HelpText – Puzzle A simple quick puzzle – do you know the answer of it? If not, go ahead and read the blog. 2008 SQL SERVER – 2008 – Step By Step Installation Guide With Images When SQL Server 2008 was newly introduced lots of people had no clue how to install SQL Server 2008 and the amount of the question which I used to receive were so much. I wrote this blog post with the spirit that this will help all the newbies to install SQL Server 2008 with the help of images. Still today this blog post has been bible for all of the people who are confused with SQL Server installation. Inline Variable Assignment I loved this feature. I have always wanted this feature to be present in SQL Server. The last time when I met developers from Microsoft SQL Server, I had talked about this feature. I think this feature saves some time but make the code more readable. Introduction to Policy Management – Enforcing Rules on SQL Server If our company policy is to create all the Stored Procedure with prefix ‘usp’ that developers should be just prevented to create Stored Procedure with any other prefix. Let us see a small tutorial how to create conditions and policy which will prevent any future SP to be created with any other prefix. 2009 Performance Counters from System Views – By Kevin Mckenna Many of you are not aware of this fact that access to performance information is readily available in SQL Server and that too without querying performance counters using a custom application or via perfmon. Till now, this fact has remained undisclosed but through this post I would like to explain you can easily access SQL Server performance counter information. Without putting much effort you will come across the system viewsys.dm_os_performance_counters. As the name suggests, this provides you easy access to the SQL Server performance counter information that is passed on to perfmon, but you can get at it via tsql. Customize Toolbar – Remove Debug Button from Toolbar I was fond of SQL Server Debugger feature in SQL Server 2000. To my utter disappointment, this feature was withdrawn from SQL Server 2005. The button of the debugger is similar to a play button and is used to run debugging commands of Visual Studio. Because of this reason, it gets very much infuriating for developers when they are developing on both – Visual Studio and SSMS. Let us now see how we can remove debugging button from SQL Server Management Studio. Effect of Normalization on Index and Performance A very interesting conversation which started from twitter. If you want to read one link this is the link I encourage you to read it. SSMS Feature – Multi-server Queries Using SQL Server Management Studio (SSMS) DBAs can now query multiple servers from one window. It is quite common for DBAs with large amount of servers to maintain and gather information from multiple SQL Servers and create report. This feature is a blessing for the DBAs, as they can now assemble all the information instantaneously without going anywhere. Query Optimizer Hint ROBUST PLAN – Question to You “ROBUST PLAN” is a kind of query hint which works quite differently than other hints. It does not improve join or force any indexes to use; it just makes sure that a query does not crash due to over the limit size of row. Let me elaborate upon it in the blog post. 2010 Do you really know the difference between various date functions available in SQL Server 2012? Here is a three part story where we explored the same with examples: Fastest Way to Restore the Database Difference Between DATETIME and DATETIME2 Difference Between DATETIME and DATETIME2 – WITH GETDATE Shrinking NDF and MDF Files – Readers’ Opinion Shrinking Database always creates performance degradation and increases fragmentation in the database. I suggest that you keep that in mind before you start reading the following comment. If you are going to say Shrinking Database is bad and evil, here I am saying it first and loud. Now, the comment of Imran is written while keeping in mind only the process showing how the Shrinking Database Operation works. Imran has already explained his understanding and requests further explanation. I have removed the Best Practices section from Imran’s comments, as there are a few corrections. 2011 Solution – Puzzle – SELECT * vs SELECT COUNT(*) This is very interesting question and I am very confident that not every one knows the answer to this question. Let me ask you again – Which will be faster SELECT* or SELECT COUNT (*) or do you think this is apples and oranges comparison. 2012 Service Broker and CAP_CPU_PERCENT – Limiting SQL Server Instances to CPU Usage In SQL Server 2012 there are a few enhancements with regards to SQL Server Resource Governor. One of the enhancement is how the resources are allocated. Let me explain you with examples. Let us understand the entire discussion with the help of three different examples. Finding Size of a Columnstore Index Using DMVs One of the very common question I often see is need of the list of columnstore index along with their size and corresponding table name. I quickly re-wrote a script using DMVs sys.indexes and sys.dm_db_partition_stats. This script gives the size of the columnstore index on disk only. I am sure there will be advanced script to retrieve details related to components associated with the columnstore index. However, I believe following script is sufficient to start getting an idea of columnstore index size. Developer Training Resources and Summary Roundup Developer Training - Importance and Significance - Part 1 In this part we discussed the importance of training in the real world. The most important and valuable resource any company is its employee. Employees who have been well-trained will be better at their jobs and produce a better product.  An employee who is well trained obviously knows more about their job and all the technical aspects. I have a very high opinion about training employees and it is the most important task. Developer Training – Employee Morals and Ethics – Part 2 In this part we discussed the most crucial components of training. Often employees are expecting the company to pay for their training and the company expresses no interest in training the employee. Quite often training expenses are the real issue for both the employee and employer. Developer Training – Difficult Questions and Alternative Perspective - Part 3 This part was the most difficult to write as I tried to address a few difficult questions and answers. Training is such a sensitive issue that many developers when not receiving chance for training think about leaving the organization. Developer Training – Various Options for Developer Training – Part 4 In this part I tried to explore a few methods and options for training. The generic feedback I received on this blog post was short and I should have explored each of the subject of the training in details. I believe there are two big buckets of training 1) Instructor Lead Training and 2) Self Lead Training. Developer Training – A Conclusive Summary- Part 5 There is no better motivation than a personal desire to learn new technology. Honestly there is nothing more personal learning. That “change is the only constant” and “adapt & overcome” are the essential lessons of life. One cannot stop the learning and resist the change. In the IT industry “ego of knowing all” and the “resistance to change” are the most challenging issues. A Quick Look at Logging and Ideas around Logging Question: What is the first thing comes to your mind when you hear the word “Logging”? Strange enough I got a different answer every single time. Let me just list what answer I got from my friends. Let us go over them one by one. Beginning Performance Tuning with SQL Server Execution Plan Solution of Puzzle – Swap Value of Column Without Case Statement Earlier this week I asked a question where I asked how to Swap Values of the column without using CASE Statement. Read here: SQL SERVER – A Puzzle – Swap Value of Column Without Case Statement. I have proposed 3 different solutions in the blog posts itself. I had requested the help of the community to come up with alternate solutions and honestly I am stunned and amazed by the qualified entries. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• MSCC: Purpose and benefits of Version Control Systems (VCS)

  Unfortunately, there was no monthly meetup during May. Which means that it was even more important and interesting to go forward with a great topic for this month. Earlier this year I already spoke to Nayar Joolfoo about doing a presentation on version control systems (VCS), and he gladly agreed since then. It was just about finding the right date for the action. Furthermore, it was also a great coincidence that Avinash Meetoo announced on social media networks that Knowledge 7 is about to have a new training on "Effective git" - which correlates to a book title Avinash is currently working on - all the best with your approach on this and reach out to our MSCC craftsmen for recessions. Once again a big Thank you to Orange Ebene Accelerator on providing the venue for us, and the MSCC members involved on securing the time slot for our event. Unfortunately, it's kind of tough to get an early confirmation for our meetups these days. I'll keep you posted on that one as there are some interesting and exciting options coming up soon. Okay, let's talk about the meeting and version control systems again. As usual, I'm going to put my first impression of the meetup: "Absolutely great topic, questions and discussions on version control systems, like git or VSO. I was also highly pleased by the number of first timers and female IT geeks. Hopefully, we will be able to keep this trend for future get-togethers." And I really have to emphasise the amount of fresh blood coming to our gathering. Also, during the initial phase it was surprising to see that exactly those first-timers, most of them students at various campuses here on the island, had absolutely no idea about version control systems. More about further down... Reactions of other attendees If I counted correctly, we had a total of 17 attendees this month, and I'd like to give you feedback from some of them: "Inspiring. Helped me understand more about GIT." -- Sean on event comments "Joined the meetup today with literally no idea what is a version control system. I have several reasons why I should be starting to use VCS as from NOW in my projects. Thanks Nayar, Jochen and other participants :)" -- Yudish on event comments "Was present today and I'm very satisfied.I was not aware if there was a such tool like git available. Thanks to those who contributed for this meetup.It was great. Learned a lot from this meetup!!" -- Leonardo on event comments "Seriously, I can see how it’s going to ease my task and help me save time. Gone are the issues with files backups.  And since I’ll be doing my dissertation this year, using Git would help me a lot for my backups and I’m grateful to Nayar for the great explanation." -- Swan-Iyah on MSCC meetup : Version Controls Hopefully, I'll be able to get some other sources - personal blogs preferred - on our meeting. Geeks, thank you so much for those encouraging comments. It's really great to experience that we, all members of the MSCC, are doing the right thing to get more IT information out, and to help each other to improve and evolve in our professional careers. Our agenda of the day Honestly, we had a bumpy start... First, I was battling a little bit with the movable room divider in order to maximize the space. I mean, we had 24 RSVPs and usually there might additional people coming along. Then, for what ever reason, we were facing power outages - actually twice in short periods. Not too good for the projector after all, but hey it went smooth for the rest of the time being. And last but not least... our first speaker Nayar got stuck somewhere on the road. ;-) Anyway, not a real show-stopper and we used the time until Nayar's arrival to introduce ourselves a little bit. It is always important for me to get to know the "newbies" a little bit, and as a result we had lots of students of university - first year, second year and recent graduates - among them. Surprisingly, none of them was ever in contact with version control systems at all. I mean, this is a shocking discovery! Similar to the ability of touch-typing I'd say that being able to use (and master) any kind of version control system is compulsory in any job in the IT industry. Seriously, I'm wondering what is being taught during the classes on the campus. All of them have to work on semester assessments or final projects, even in small teams of 2-4 people. That's the perfect occasion to get started with VCS. Already in this phase, we had great input from more experienced VCS users, like Sean, Avinash and myself. git - a modern approach to VCS - Nayar What a tour! Nayar gave us the full round of git from start to finish, even touching some more advanced techniques. First, he started to explain about the importance of version control systems as an essential tool for software developers, even working alone on a project, and the ability to have a kind of "time machine" that allows you to inspect and revert to a previous version of source code at any time. Then he showed how easy it is to install git on an Ubuntu based system but also mentioned that git is literally available for any operating system, like Windows, Mac OS X and of course other Linux distributions. Next, he showed us how to set the initial configuration values of user name and email address which simplifies the daily usage of the git client while working with your repositories. Then he initialised and added a new repository for some local development of a blogging software. All commands were done using the command line interface (CLI) so that they can be repeated on any system as reference. The syntax and the procedure is always the same, and Nayar clearly mentioned this to the attendees. Now, having a git repository in place it was about time to work on some "important" changes on the blogging software - just for the sake of demonstrating the ease of use and power of git. One interesting question came very early: "How many commands do we have to learn? It looks quite difficult at the moment" - Well, rest assured that during daily development circles you will need less than 10 git commands on a regular base: git add, commit, push, pull, checkout, and merge And Nayar demo'd all of them. Much to the delight of everyone he also showed gitk which is the git repository browser. It's an UI tool to display changes in a repository or a selected set of commits. This includes visualizing the commit graph, showing information related to each commit, and the files in the trees of each revision. Using gitk to display and browse information of a local git repository And last but not least, we took advantage of the internet connectivity and reached out to various online portals offering git hosting for free. Nayar showed us how to push the local repository into a remote system on github. Showing the web-based git browser and history handling, and then also explained and demo'd on how to connect to existing online repositories in order to get access to either your own source code or other people's open source projects. Next to github, we also spoke about bitbucket and gitlab as potential online platforms for your projects. Have a look at the conditions and details about their free service packages and what you can get additionally as a paying customer. Usually, you already get a lot of services for up to five users for free but there might be other important aspects that might have an impact on your decision. Anyways, moving git-based repositories between systems is a piece of cake, and changing online platforms is possible at any stage of your development. Visual Studio Online (VSO) - Jochen Well, Nayar literally covered all elements of working with git during his session, including the use of external online platforms. So, what would be the advantage of talking about Visual Studio Online (VSO)? First of all, VSO is "just another" online platform for hosting and managing git repositories on remote systems, equivalent to github, bitbucket, or any other web site. At the moment (of writing), Microsoft also provides a free package of up to five users / developers on a git repository but there is more in that package. Of course, it is related to software development on the Windows systems and the bonds are tightened towards the use of Visual Studio but out of experience you are absolutely not restricted to that. Connecting a Linux or Mac OS X machine with a git client or an integrated development environment (IDE) like Eclipse or Xcode works as smooth as expected. So, why should one opt in for VSO? Well, one of the main aspects that I would like to mention here is that VSO integrates the Application Life Cycle Methodology (ALM) of Microsoft in their platform. Meaning that you get agile project management with Backlogs, Sprints, Burn-down charts as well as the ability to track tasks, bug reports and work items next to collaborative team chats. It's the whole package of agile development you'll get. And, something I mentioned briefly during the begin of our meeting, VSO gives you the possibility of an automated continuous integrated (CI) process which builds and can run tests of your source code after each commit of changes. Having a proper CI strategy is also part of the Clean Code Developer practices - on Level Green actually -, and not only simplifies your life as a software developer but also reduces the sources of potential errors. Seamless integration and automated deployment between Microsoft Azure Web Sites and git repository But my favourite feature is the seamless continuous deployment to Microsoft Azure. Especially, while working on web projects it's absolutely astounishing that as soon as you commit your chances it just takes a couple of seconds until your modifications are deployed and available on your Azure-hosted web sites. Upcoming Events and networking Due to the adjusted times, everybody was kind of hungry and we didn't follow up on networking or upcoming events - very unfortunate to my opinion and this will have an impact on future planning of our meetups. Because I rather would like to see more conversations during and at the end of our meetings than everyone just packing their laptops, bags and accessories and rush off to grab some food. I was hoping to get some information regarding this year's Code Challenge - supposedly to be organised during July? Maybe someone could leave a comment on that - but I couldn't get any updates. Well, I'll keep digging... In case that you would like to get more into git and how to use it effectively, please check out Knowledge 7's upcoming course on "Effective git". Thanks Avinash for your vital input into today's conversation and I'm looking forward to get a grip on your book title very soon. My resume of the day Do not work in IT without any kind of version control system! Seriously, without a VCS in place you're doing it wrong. It's like driving a car without seat belts attached or riding your bike without safety helmet. You don't do that! End of discussion. ;-) Nowadays, having access to free (as in cost) tools to install on your machine and numerous online platforms to host your source code for free for up to five users it's a no-brainer to get yourself familiar with VCS. Today's sessions gave a good overview on how to start using git and how to connect to various remote services like github or VSO.

  Read the article

• CodePlex Daily Summary for Tuesday, September 04, 2012

  CodePlex Daily Summary for Tuesday, September 04, 2012Popular ReleasesPE file reader: READPE-e9ff717a638d.zip: Introduced some new code which parses the IMAGENTHEADERS. At the moment the command line options dosheader and imagentheaders are working and and example of their usage can be... D:\>readpe pe-files\main.exe dosheader imagentheadersMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.64: Another attempt to fix the fiasco that was my bad decision to rename the DLLs to get away from a strong-name collision that was causing lots of problems for me. Too many existing projects expected AjaxMin.dll, and lots of things broke downstream from me. This release keeps the .net 2.0 version named AjaxMin.dll. The new .net 3.5 and .net 4.0 versions are named AjaxMinLibrary.dll. If an existing project is expecting the old name, they should continue to pick up the .net 2.0 version (since the ...Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83NWebsec: NWebsec 1.0.3: This release fixes two bugs in the NWebsec.Mvc package. Go get it on NuGet! http://nuget.org/packages/NWebsec.Mvc/ These work items made it into the release: 9 10 Check out the Documentation to learn how it works. This release has been tagged v1.0.3 in source control. Enjoy!RBAC Manager R2 for Exchange 2010 SP2, Exchange 2013 Preview and Office 365: RBAC Manager R2 1.5.5.0: now supports to manage RBAC on Office 365 'remember password' feature now saves the password as encrypted as opposed to plain-text format in version 1.5.0.0 DPAPI is used to encrypt the saved password; for more information about DPAPI please check: Managed DPAPI Part I: ProtectedData http://blogs.msdn.com/b/shawnfa/archive/2004/05/05/126825.aspx The tool requires HTTP/HTTPS network connection to the Exchange server Known Bugs: Active Directory lookup is not working remotely and crashes the ...WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.Dynamics AX Build Scripts: AX TFS Build Library Beta - v0.2.0.0: Beta release of TFS 2010 workflow code activities for AX 2009 and AX 2012. Build template for AX 2012 included. There is one refactor of code that will break your existing workflows. The AOS workflow step to stop/start AOS now expects the actual windows service name, not the port number of the AOS. There now is a new step to retrieve server settings, which can get the service identifier based on the port number. The registry has to be read to retrieve these settings, and we didn't want to ke...Cosmo OS: Cosmo OS Lama Preview: Info Sulla Release Lama Preview ( Prima Preview Pubblica ) Data Di Rilascio: 2 / 09 / 12 Build: 1950 Ramo Di Sviluppo: cosmo_os.preview.lama.bid1535543 Tipo Release: Stable / PreviewNETDeob0: NETDeob 0.3.1 BETA binaries: 0.3.1Custom Captcha Plugin for Kooboo CMS for adding content or sending feedback: Custom Captcha Validator Plugin v1.1 for Kooboo: Download file CustomCaptchaValidatorPlugin.dll and install it to KooBoo CMS. Release 1.1: Fixed error: "A generic error occurred in GDI+" (if hosting is less than Windows Server 2008 or Windows 7) - http://forum.kooboo.com/yafpostsm6602Custom-captcha---any-best-practice.aspx#post6602TSQL Code Smells Finder: POC 1.01: Proof of concept 1.01 TSQLDomTest.ps1 and Errors.Txt are requiredSaturn Kinect: Saturn Kinect + Sample Applications - Release 3: This release includes : - Saturn Kinect Library - Kinect Motion Capture Application - Controlling mouse cursor sample - Hand swip detection sample + Source CodesDiscuzViet: DiscuzX2.5_02092012_Vietnam: DiscuzX2.502092012VietnamBookmark Collector: 01.00.00: This is the first release with a minimal feature set. You can save, edit, delete, and display a list of URLs from various sites.EntLib.com????????: EntLib.com???????? v3.0: EntLib eCommerce Solution ???Microsoft .Net Framework?????????????????????。Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.Math.NET Numerics: Math.NET Numerics v2.2.1: Major linear algebra rework since v2.1, now available on Codeplex as well (previous versions were only available via NuGet). Since v2.2.0: Student-T density more robust for very large degrees of freedom Sparse Kronecker product much more efficient (now leverages sparsity) Direct access to raw matrix storage implementations for advanced extensibility Now also separate package for signed core library with a strong name (we dropped strong names in v2.2.0) Also available as NuGet packages...New ProjectsAction Bar: Action Bar is a SNS network based on activities.async/await C# Samples: Project demonstrating new C# feature - async and await. You can find here several solutions to make UI calls asynchronous: APM, EAP and async.Attribute Based Xaml Generator: Dynamic Xaml UI Generator and Editor Just point it to a dll or an exe and then navigate through your namespaces to your classB INI Sharp Library: Full support for INI files.brevis nopCommerce Extensions: Extensions for nopCommerce open soruce e-commerce solution (several Versions). !Contents nop 1.90 fpr testing the new Lib! This will be removed after 1. releaseConEmu - Windows console with tabs: ConEmu (short for Console Emulator) is a console window and tabbed environment for Windows. Tabs, Fonts, Quake style, Transparency and hundreds of other optionsContrib.Mod.AccountWidgets: Orchard module for adding login and registration widgetsCSharp GUI for Mono: This is an application which makes use of "Mono" to execute CSharp programs. It provides a graphical user interface to run the CSharp program. DocCollection: ???????????????http://www.qlili.comfanpages: Fanatics!ISIS Associations Manager: Application Web permettant la gestion d'Associations. (Membres, Emailing, Calendier)LogMan: ????????????b/s??，??python?? require: web.pyLucifure Stash - Azure Table Storage Client: Lucifure Stash is an alternate Azure table storage client, which supports arrays, enumerations, large data > 64KB, serialization, morphing and more.Mod.EverlastingLogin: Orchard module to allow a user to stay logged in for a certain amount of time using cookiesPHP Extra Functions: PHP Extra Functions is a suite of functions that extend common libraries with easy to use functions. For example, functions are added to MySQLi to simplify use.Raise events controlled: This is an example of raising you events controlled (with exception handling)sb0t v.5: sb0t 5 development page.SharePoint Mobile OA Platform: Via mobile device, by using the SharePoint Mobile Support, Web Service, Client OM, WCF Data Service bring about mobile office.Simple Guestbook: I just want to share simple code, may be will be helpful for newbies.SimplyWeather2.gadget: A neat little weather gadget for your Windows Desktop.Tanks: Required summary is hereUtility Project: Utilities ProjectWindows Phone: The goal of this project is to improve my skills in Windows Phonewords: ?????????Wpf Testing Lib: This is a project for auto testing wpf appswtstudy: wtstudy

  Read the article

< Previous Page | 1 2 3 4